Two regulators (GPIO 72 & 107) for the IMX766 sensor are missing here.
Without a driver, it's unclear if they're extra supplies or pwdn/power
GPIOs (labeled "custom" in the downstream kernel).
So add only those fixed regulators that are currently predictable for
camera sensors, camera EEPROMs and camera actuators.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Link: https://lore.kernel.org/r/20250203111429.22062-2-danila@jiaxyga.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
While the CPUs thermal is handled by the LMH, and GPU has a passive
cooldowm via the HLOS DCVS, all the other thermal blocks only have
hot and critical and no passive/active trip points.
Passive or active thermal management for those blocks should
be either defined if somehow we can express those in DT or
in the board definition if there's an active cooling device
available.
The tsens MAX_THRESHOLD is set to 120C on those platforms, so set
the hot to 110C to leave a chance to HLOS to react and critical to
115C to avoid the monitor thermal shutdown.
In the case a passive or active cooling device would be
available, the downstream reference implementation uses
the 95C "tj" trip point, as we already use for the
gpuss thermal blocks.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250203-topic-sm8650-thermal-cpu-idle-v4-3-65e35f307301@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On the SM8650, the dynamic clock and voltage scaling (DCVS) for the GPU
is done from the HLOS, but the GPU can achieve a much higher temperature
before failing according the reference downstream implementation.
Set higher temperatures in the GPU trip points corresponding to
the temperatures provided by Qualcomm in the dowstream source, much
closer to the junction temperature and with a higher critical
temperature trip in the case the HLOS DCVS cannot handle the
temperature surge.
The tsens MAX_THRESHOLD is set to 120C on those platforms, so set
the hot to 110C to leave a chance to HLOS to react and critical to
115C to avoid the monitor thermal shutdown.
Fixes: 497624ed55 ("arm64: dts: qcom: sm8650: Throttle the GPU when overheating")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250203-topic-sm8650-thermal-cpu-idle-v4-2-65e35f307301@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On the SM8650, the dynamic clock and voltage scaling (DCVS) is done in an
hardware controlled loop using the LMH and EPSS blocks with constraints and
OPPs programmed in the board firmware.
Since the Hardware does a better job at maintaining the CPUs temperature
in an acceptable range by taking in account more parameters like the die
characteristics or other factory fused values, it makes no sense to try
and reproduce a similar set of constraints with the Linux cpufreq thermal
core.
In addition, the tsens IP is responsible for monitoring the temperature
across the SoC and the current settings will heavily trigger the tsens
UP/LOW interrupts if the CPU temperatures reaches the hardware thermal
constraints which are currently defined in the DT. And since the CPUs
are not hooked in the thermal trip points, the potential interrupts and
calculations are a waste of system resources.
Drop the current passive trip points and only leave the critical trip
point that will trigger a software system reboot before an hardware
thermal shutdown in the allmost impossible case the hardware DCVS cannot
handle the temperature surge.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20250203-topic-sm8650-thermal-cpu-idle-v4-1-65e35f307301@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The X1 family is split into two parts: the 10- and 12-core parts are
variants of the same silicon with different fusing, whereas the 8-core
ones are a separate design. Thankfully, the software interface is only
barely different, letting us reuse much of the existing X1 work.
Introduce support for the X1P42100 SoC and the CRD based on it, through
overlaying some bits. Everything we already support on X1E80100 and
friends, minus the GPU, should work as-is.
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250203-topic-x1p4_dts-v2-6-72cd4cdc767b@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the OPP tables for each CPU clusters (cpu0-1, cpu2-3-4, cpu5-6 & cpu7)
to permit scaling the Last Level Cache Controller (LLCC), DDR and L3 cache
frequency by aggregating bandwidth requests of all CPU core with referenc
to the current OPP they are configured in by the LMH/EPSS hardware.
The effect is a proper caches & DDR frequency scaling when CPU cores
changes frequency.
The OPP tables were built using the downstream memlat ddr, llcc & l3
tables for each cluster types with the actual EPSS cpufreq LUT tables
from running HDK and QRD devices.
The cpu2 and cpu5 tables are similar but must be kept separate to
take in account that they define OPP for shared CPUs of two different
clusters that can scale separately, thus vote different bandwidths.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250211-topic-sm8650-ddr-bw-scaling-v2-3-a0c950540e68@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for vadc and adc-tm channels which are used for
monitoring thermistors present on the platform.
- Add the necessary includes for qcom,spmi-adc7-pm7325 and
qcom,spmi-adc7-pmk8350.
- Add thermal zones for quiet-thermal, sdm-skin-thermal, and
xo-thermal, and define their polling delays and thermal sensors.
- Configure the pm7325_temp_alarm node to use the pmk8350_vadc
channel for thermal monitoring.
- Configure the pmk8350_adc_tm node to enable its thermal sensors
and define their registers and settings.
- Configure the pmk8350_vadc node to define its channels and settings
Signed-off-by: Rakesh Kota <quic_kotarake@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250212113342.873086-1-quic_kotarake@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There are 4 Qualcomm PMIC Die Temp Alarm Sensor Devices under windows os,
in separate dt files, pm8350c and pmr735a have already support temp alarm,
add the rest 2 devices for sc8280xp-pmic.
Temperature trip points are from dsdt(Temp. in tenths of degrees Kelvin).
example:
Name (TPSV, 0x0E60) // 0x0E60 - 2730 = 950
Method (_PSV, 0, NotSerialized) // _PSV: Passive Temperature
{
Return (\_SB.TZ15.TPSV)
}
Name (TCRT, 0x0F28) // 0X0F28 - 2730 = 1150
Method (_CRT, 0, NotSerialized) // _CRT: Critical Temperature
{
Return (\_SB.TZ15.TCRT)
}
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Link: https://lore.kernel.org/r/20250111083209.262269-2-mitltlatltl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There is no use wasting power on keeping the links between the CPU and
something else online when the CPUs are online. Change the interconnect
tag for such paths, so that RPMh is requested to automatically
clock-gate those when possible.
Keeping these paths online is also a potential power collapse blocker,
however this commit alone doesn't magically fix all the remaining
TODOs related to suspend.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250111-topic-x1e_fixups-v1-2-77dc39237c12@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Pull turbostat updates from Len Brown:
- Fix regression that affinitized forked child in one-shot mode.
- Harden one-shot mode against hotplug online/offline
- Enable RAPL SysWatt column by default
- Add initial PTL, CWF platform support
- Harden initial PMT code in response to early use
- Enable first built-in PMT counter: CWF c1e residency
- Refuse to run on unsupported platforms without --force, to encourage
updating to a version that supports the system, and to avoid
no-so-useful measurement results
* tag 'turbostat-2025.02.02' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (25 commits)
tools/power turbostat: version 2025.02.02
tools/power turbostat: Add CPU%c1e BIC for CWF
tools/power turbostat: Harden one-shot mode against cpu offline
tools/power turbostat: Fix forked child affinity regression
tools/power turbostat: Add tcore clock PMT type
tools/power turbostat: version 2025.01.14
tools/power turbostat: Allow adding PMT counters directly by sysfs path
tools/power turbostat: Allow mapping multiple PMT files with the same GUID
tools/power turbostat: Add PMT directory iterator helper
tools/power turbostat: Extend PMT identification with a sequence number
tools/power turbostat: Return default value for unmapped PMT domains
tools/power turbostat: Check for non-zero value when MSR probing
tools/power turbostat: Enhance turbostat self-performance visibility
tools/power turbostat: Add fixed RAPL PSYS divisor for SPR
tools/power turbostat: Fix PMT mmaped file size rounding
tools/power turbostat: Remove SysWatt from DISABLED_BY_DEFAULT
tools/power turbostat: Add an NMI column
tools/power turbostat: add Busy% to "show idle"
tools/power turbostat: Introduce --force parameter
tools/power turbostat: Improve --help output
...
Pull sh updates from John Paul Adrian Glaubitz:
"Fixes and improvements for sh:
- replace seq_printf() with the more efficient
seq_put_decimal_ull_width() to increase performance when stress
reading /proc/interrupts (David Wang)
- migrate sh to the generic rule for built-in DTB to help avoid race
conditions during parallel builds which can occur because Kbuild
decends into arch/*/boot/dts twice (Masahiro Yamada)
- replace select with imply in the board Kconfig for enabling
hardware with complex dependencies. This addresses warnings which
were reported by the kernel test robot (Geert Uytterhoeven)"
* tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
sh: boards: Use imply to enable hardware with complex dependencies
sh: Migrate to the generic rule for built-in DTB
sh: irq: Use seq_put_decimal_ull_width() for decimal values
