mirrors/linux
2
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2026-05-14 05:22:19 -04:00
Code Issues Packages Projects Releases Wiki Activity

arm64: dts: qcom: qcs6490-rb3gen2: add and enable BT node

Browse Source 
Add the PMU node for WCN6750 present on the qcs6490-rb3gen2
board and assign its power outputs to the Bluetooth module.

In WCN6750 module sw_ctrl and wifi-enable pins are handled
in the wifi controller firmware. Therefore, it is not required
to have those pins' entries in the PMU node.

Signed-off-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250221171014.120946-2-quic_janathot@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This commit is contained in:
Janaki Ramaiah Thota
2025-02-21 22:40:14 +05:30
committed by Bjorn Andersson
parent c24db2c178
commit 914d16b4a9
1 changed files with 170 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

171
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
View File

@@ -1,6 +1,6 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
* Copyright (c) 2023-2024 Qualcomm Innovation Center, Inc. All rights reserved.
*/
/dts-v1/;
@@ -36,6 +36,7 @@ / {
aliases {
serial0 = &uart5;
serial1 = &uart7;
};
chosen {
@@ -258,6 +259,63 @@ vph_pwr: vph-pwr-regulator {
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
};
wcn6750-pmu {
compatible = "qcom,wcn6750-pmu";
pinctrl-0 = <&bt_en>;
pinctrl-names = "default";
vddaon-supply = <&vreg_s7b_0p972>;
vddasd-supply = <&vreg_l11c_2p8>;
vddpmu-supply = <&vreg_s7b_0p972>;
vddrfa0p8-supply = <&vreg_s7b_0p972>;
vddrfa1p2-supply = <&vreg_s8b_1p272>;
vddrfa1p7-supply = <&vreg_s1b_1p872>;
vddrfa2p2-supply = <&vreg_s1c_2p19>;
bt-enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
regulators {
vreg_pmu_rfa_cmn: ldo0 {
regulator-name = "vreg_pmu_rfa_cmn";
};
vreg_pmu_aon_0p59: ldo1 {
regulator-name = "vreg_pmu_aon_0p59";
};
vreg_pmu_wlcx_0p8: ldo2 {
regulator-name = "vreg_pmu_wlcx_0p8";
};
vreg_pmu_wlmx_0p85: ldo3 {
regulator-name = "vreg_pmu_wlmx_0p85";
};
vreg_pmu_btcmx_0p85: ldo4 {
regulator-name = "vreg_pmu_btcmx_0p85";
};
vreg_pmu_rfa_0p8: ldo5 {
regulator-name = "vreg_pmu_rfa_0p8";
};
vreg_pmu_rfa_1p2: ldo6 {
regulator-name = "vreg_pmu_rfa_1p2";
};
vreg_pmu_rfa_1p7: ldo7 {
regulator-name = "vreg_pmu_rfa_1p7";
};
vreg_pmu_pcie_0p9: ldo8 {
regulator-name = "vreg_pmu_pcie_0p9";
};
vreg_pmu_pcie_1p8: ldo9 {
regulator-name = "vreg_pmu_pcie_1p8";
};
};
};
};
&apps_rsc {
@@ -907,6 +965,39 @@ &pon_resin {
status = "okay";
};
&qup_uart7_cts {
/*
* Configure a bias-bus-hold on CTS to lower power
* usage when Bluetooth is turned off. Bus hold will
* maintain a low power state regardless of whether
* the Bluetooth module drives the pin in either
* direction or leaves the pin fully unpowered.
*/
bias-bus-hold;
};
&qup_uart7_rts {
/* We'll drive RTS, so no pull */
drive-strength = <2>;
bias-disable;
};
&qup_uart7_rx {
/*
* Configure a pull-up on RX. This is needed to avoid
* garbage data when the TX pin of the Bluetooth module is
* in tri-state (module powered off or not driving the
* signal yet).
*/
bias-pull-up;
};
&qup_uart7_tx {
/* We'll drive TX, so no pull */
drive-strength = <2>;
bias-disable;
};
&qupv3_id_0 {
status = "okay";
};
@@ -950,12 +1041,90 @@ &sdhc_2 {
&tlmm {
gpio-reserved-ranges = <32 2>, /* ADSP */
<48 4>; /* NFC */
bt_en: bt-en-state {
pins = "gpio85";
function = "gpio";
output-low;
bias-disable;
};
qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
pins = "gpio28";
function = "gpio";
/*
* Configure a bias-bus-hold on CTS to lower power
* usage when Bluetooth is turned off. Bus hold will
* maintain a low power state regardless of whether
* the Bluetooth module drives the pin in either
* direction or leaves the pin fully unpowered.
*/
bias-bus-hold;
};
qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
pins = "gpio29";
function = "gpio";
/*
* Configure pull-down on RTS. As RTS is active low
* signal, pull it low to indicate the BT SoC that it
* can wakeup the system anytime from suspend state by
* pulling RX low (by sending wakeup bytes).
*/
bias-pull-down;
};
qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
pins = "gpio31";
function = "gpio";
/*
* Configure a pull-up on RX. This is needed to avoid
* garbage data when the TX pin of the Bluetooth module
* is floating which may cause spurious wakeups.
*/
bias-pull-up;
};
qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
pins = "gpio30";
function = "gpio";
/*
* Configure pull-up on TX when it isn't actively driven
* to prevent BT SoC from receiving garbage during sleep.
*/
bias-pull-up;
};
};
&uart5 {
status = "okay";
};
&uart7 {
/delete-property/ interrupts;
interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
<&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
pinctrl-1 = <&qup_uart7_sleep_cts>,
<&qup_uart7_sleep_rts>,
<&qup_uart7_sleep_tx>,
<&qup_uart7_sleep_rx>;
pinctrl-names = "default",
"sleep";
status = "okay";
bluetooth: bluetooth {
compatible = "qcom,wcn6750-bt";
vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
vddaon-supply = <&vreg_pmu_aon_0p59>;
vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
max-speed = <3200000>;
};
};
&usb_1 {
status = "okay";
};