Pull RISC-V fixes from Paul Walmsley:
- Fix swiotlb initialization on systems where DRAM is located above
4GiB (such as the Tenstorrent Blackhole cards)
- Fix an out-of-bounds access in the memory hot-remove code that can
occur on Sv39 and Sv48 systems
- Avoid oopsing during boot if the SBI component of the unaligned
access performance checking code loses a race against __init function
freeing
- Avoid attempting to install the debug-enabled vDSO when it shouldn't
be built due to !CONFIG_MMU
- Avoid some sparse warnings by adding missing __iomem notations in
get_cycles{,_hi}()
- Drop an unnecessary runtime warning in the SiFive errata handler
* tag 'riscv-for-linus-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: vdso: Only try to install vDSO when present
riscv: mm: Fix out-of-bounds page-table walk during memory hot-remove
riscv: drop __init from vec_check_unaligned_access_speed_all_cpus
riscv: mm: fix SWIOTLB initialization for systems with DRAM above 4GB
riscv/sifive: remove warning in errata
riscv: time: Add missing __iomem in get_cycles() and get_cycles_hi()
Pull s390 updates from Vasily Gorbik:
- Fix PCI MMIO write syscall falsely reporting success for mappings not
valid for MMIO when MIO is unavailable by returning -EFAULT
- Fix CPRB parameter buffer overflows in zcrypt CCA AES cipher and ECC
private key conversion by rejecting oversized key tokens
- Fix buffer overreads and length underflow in pkey and zcrypt CCA
token validation by checking length fields against actual buffer
sizes
- Fix out of bounds permission bitmap access in zcrypt EP11 admin CPRB
filtering on custom device nodes by using AP_DOMAINS as the limit
- Fix speculative permission bitmap reads in zcrypt CCA and EP11 admin
CPRB handling by sanitizing user controlled domain indexes
- Fix sensitive key material left in zcrypt CCA clear key import
buffers by scrubbing CPRB and temporary buffers after use
* tag 's390-7.2-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: Fix missing mem scrub at clear key import in cca_clr2cipherkey()
s390/zcrypt: Close speculative mem read possibility
s390/zcrypt: Fix wrong domain value verification with EP11 CPRBs
s390/zcrypt: Fix buffer over-read in cca_cipher2protkey
s390/zcrypt: Validate length for CCA ECC private key requests
s390/zcrypt: Validate length for CCA AES cipher key requests
s390/pci: Fix s390_pci_mmio_write syscall error return without MIO
Pull misc x86 fixes from Ingo Molnar:
- Fix the boot-time memcmp() asm implementation's constraints
and optimization properties (Mauricio Faria de Oliveira)
- Move the 0xd0...0xd7 AMD Zen5 model range from the Zen6
range where it mistakenly ended up (Pratik Vishwakarma)
* tag 'x86-urgent-2026-08-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Carve out a Zen5 models range
x86/boot: Add volatile, clobbers and zero-length test in memcmp()
Pull scheduler fix from Ingo Molnar:
- Fix wakeups of deferred DL servers to be actually deferred (Gabriele
Monaco)
* tag 'sched-urgent-2026-08-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Use revised wakeup rule only for running dl_server
Pull uprobes fix from Ingo Molnar:
- Fix uretprobes race that can crash the kernel (Breno Leitao)
* tag 'perf-urgent-2026-08-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
uprobes: Fix NULL pointer dereference in hprobe_expire()
Pull vfs fixes from Christian Brauner:
"binfmt_misc:
- Don't let an 'F' entry pin its own instance.
An entry registered with 'F' opens its interpreter at registration
time and holds that file until the entry is freed, so an entry
nobody removes by hand is only closed once the binfmt_misc
superblock is shut down.
If the interpreter lives on a mount that keeps that superblock
alive the two pin each other and the file is never closed. That's
reachable by pointing the interpreter at the instance itself or by
using the instance as an overlayfs lower layer, and once the mount
namespace is gone there's nothing left to unregister through
either.
- Restore write access when removing an entry.
Registering with the MISC_FMT_OPEN_FILE flag opens the interpreter
via open_exec() which denies write access for as long as the entry
exists, but removal only did filp_close() and never restored it.
The inode's i_writecount stayed permanently negative and opening
the interpreter for writing kept failing with ETXTBSY long after
the entry was gone.
- Use exe_file_deny_write_access() for the interpreter clone so both
sides base their decision on the same mode.
- Reject a flag character as the field delimiter. create_entry() pads
the buffer with the delimiter so the field parsers terminate even
on a truncated string, but check_special_flags() consumes flag
characters instead of scanning for the delimiter.
If the delimiter is itself a flag character the padding stops
acting as a terminator and the scan keeps reading past the end of
the allocation. Such a registration was always rejected, just only
after the out of bounds read has already happened.
- Don't leak the user namespace when the mount fails.
bm_get_tree() hands its reference to get_tree_keyed() and sget_fc()
moves it into sb->s_fs_info, but generic_shutdown_super() only
calls ->put_super() from inside the if (sb->s_root) branch and
bm_fill_super() can fail before either s_root or s_op is in place.
Drop the reference in ->kill_sb() instead, which runs
unconditionally.
netfs:
- Clear PG_private_2 on a copy-to-cache append failure.
- Handle a rolling buffer allocation failure in single-object
writeback and drop the extra folio reference
netfs_write_folio_single() took before the append.
- Release the previously batched readahead folios when
rolling_buffer_load_from_ra() fails in
netfs_prepare_read_iterator()
- Fix the folio_queue ENOMEM in writeback by adding a mempool and
passing gfp flags into the rolling buffer helpers.
iomap:
- Add a separate bio_set for iomap_split_ioend(). It can split bios
that already come from iomap_ioend_bioset and deadlock once that
bioset is exhausted.
afs:
- Set call->async for an asynchronous afs_fs_fetch_data() the way
afs_fs_fetch_data64() already does.
- Subtract subreq->transferred from subreq->len in
afs_fs_fetch_data() rather than adding it.
- Fix a UAF when sending a message"
* tag 'vfs-7.2-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: add a separate bio_set for iomap_split_ioend
binfmt_misc: don't leak the user namespace when the mount fails
binfmt_misc: reject a flag character as the field delimiter
binfmt_misc: use exe_file_deny_write_access() for the interpreter clone
binfmt_misc: restore write access when removing an entry
binfmt_misc: don't let an 'F' entry pin its own instance
netfs: Fix folio_queue ENOMEM in writeback by adding a mempool
netfs: release readahead folios on iterator preparation failure
netfs: handle single writeback rolling buffer allocation failure
netfs: clear PG_private_2 on copy-to-cache append failure
afs: Fix UAF when sending a message
afs: Fix afs_fs_fetch_data() to subtract transferred from len
afs: Fix afs_fs_fetch_data() to set call->async
Pull SCSI fixes from James Bottomley"
"No core changes. The largest driver fix is the reversion of threaded
interrupt handlers in UFS and the next is the resume deadlock fix in
hisi_sas which extends into libsas"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Initialize hba->rpmbs list in ufshcd
scsi: mpi3mr: Fix potential deadlock in mpi3mr_fault_uevent_emit
scsi: target: Clear cmd_cnt when initial counter enrollment fails
scsi: zfcp: Fix memory leak during adapter release by destroying gid_pn_req
scsi: ufs: core: Revert "Delegate the interrupt service routine to a threaded IRQ handler"
scsi: ufs: core: Cancel RTC work in active-active suspend
scsi: scsi_debug: Fix REPORT ZONES alloc_len underflow OOB write
scsi: target: iblock: Fix wrong PR ops NULL check for PREEMPT/RELEASE
scsi: ufs: dt-bindings: Add missing mcq reg for qcom,sa8255p-ufshc
scsi: libsas: Fix HA resume deadlock and hisi_sas disk-wake race
scsi: libiscsi_tcp: Bound SCSI Response data segment to the connection buffer
scsi: libiscsi: Fix stale-data leak into the SCSI sense buffer
Pull dmaengine fixes from Vinod Koul:
- switchtec fix for register programming
- sun6i descriptor reclaim fix
- Intel idxd fixes for double free in error and setup failure
- Qualcomm bam dma command element fix
* tag 'dmaengine-fix-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: qcom: bam_dma: Fix command element mask field for BAM v1.6.0+
dmaengine: idxd: fix fdev setup failure cleanup in idxd_cdev_open()
dmaengine: idxd: fix double free of wq, engine, and group structs
dmaengine: sun6i-dma: Fix reclaim descriptors while terminating DMA
dmaengine: switchtec-dma: fix FIELD_GET misuse when programming SE threshold
Pull i2c fixes from Andi Shyti:
"A set of fixes across several host controller drivers. The largest
part addresses three issues in the i.MX driver, while the remaining
changes fix probe ordering, power management, timeout recovery and
error handling.
amd-mp2:
- unregister callback if adapter registration fails
designware:
- defer probe until child GPIO controllers are bound
imx:
- mark adapter suspended while hardware is powered down
- fix stale slave pointer and shared IRQ registration race
- stop slave timer before clearing slave pointer
iproc:
- reset controller if START_BUSY remains set after timeout
jz4780:
- cache clock rate to avoid clk_get_rate() deadlock
qcom-cci:
- rely on runtime PM helpers for system sleep
spacemit:
- request interrupt after clock initialization"
* tag 'i2c-fixes-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux:
i2c: qcom-cci: drop custom suspend/resume and rely on runtime PM helpers
i2c: imx: Cancel hrtimer before clearing slave pointer
i2c: imx: Fix slave registration race and error handling
i2c: iproc: reset bus after timeout if START_BUSY is stuck
i2c: imx: mark I2C adapter when hardware is powered down
i2c: designware: defer probe if child GpioInt controllers are not bound
i2c: jz4780: Cache host clock rate at probe to prevent CCF prepare_lock deadlock
i2c: amd-mp2: Unregister callback on adapter add failure
i2c: spacemit: request IRQ after controller initialization
Pull Kbuild fixes from Nathan Chancellor:
- Fix regression with MO= when building out of tree kernel modules due
to incorrectly overwriting build tree's Makefile
- Avoid stripping .BTF sections from modules when building debug .rpm
packages
* tag 'kbuild-fixes-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: rpm-pkg: Preserve BTF sections in kernel modules during debuginfo stripping
kbuild: Stop modifying $(objtree)/Makefile when building oot-kmods oos
Pull tracing fixes from Steven Rostedt:
- Reset dropped_count in mmio_reset_data()
When mmio_reset_data() is called, it does not reset the dropped_count
so that subsequent runs will have incorrect reporting.
- Add NULL check for mmio_trace_array in logging functions
The functions __trace_mmiotrace_rw() and __trace_mmiotrace_map() may
have the 'tr' variable passed to it as NULL. But they both
dereference it without checking if it is NULL first.
- Check return value of __register_event() in trace_module_add_events()
If __register_event() fails, the __add_event_to_tracers() call after
it will create a file for it. If the module fails to load and its
memory is freed, the file will still point to it and it will not be
removed as the registering of the event did not complete.
Only call __add_event_to_tracers() if the __register_event() was
successful.
- Fix false positive match in regex_match_full()
The regex full matching uses a strncmp() to test against the match
string and the value. It should not match if value is a prefix of the
string to match. Check to make sure the length of the strings match
before comparing.
- Fix reader page read offset for remote buffers
A page swapped in by __rb_get_reader_page_from_remote() retains its
stale read offset, causing subsequent reads to skip events or read
past valid data.
- Fix memory leak of subbuf_ids in rb_allocate_cpu_buffer()
Remote buffers allocate a subbuf_ids array. If the allocator function
fails after it is allocated, it does not free it, resulting in a
memory leak.
* tag 'trace-v7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Fix subbuf_ids memory leak in rb_allocate_cpu_buffer() error path
ring-buffer: Fix reader page read offset for remote buffers
tracing/filters: Fix false positive match in regex_match_full()
tracing: Check return value of __register_event() in trace_module_add_events()
tracing/mmiotrace: Add NULL check for mmio_trace_array in logging functions
tracing/mmiotrace: Reset dropped_count in mmio_reset_data()
Pull ntfs fixes from Namjae Jeon:
- Keep RECALL_ON_OPEN in inode flags when reloading them from
$FILE_NAME
- Check runlist reallocation sizes for negative values and overflow
- Drop stale page cache after shrinking non-resident attributes to
prevent writeback failures and data loss
* tag 'ntfs-for-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/ntfs:
ntfs: drop stale page-cache when shrinking a non-resident attr
ntfs: harden runlist realloc size calculations
ntfs: preserve RECALL_ON_OPEN on WSL special-file reparse points
Pull smb server fixes from Steve French:
- Use memcmp() when comparing fixed-size binary ClientGUIDs, so
embedded NUL bytes are handled correctly
- Reject repeated SMB2 NEGOTIATE requests after dialect selection
This prevents preauth_info leaks, enforces the SMB2 protocol
requirements, and serializes negotiation state updates.
- Fix a use-after-free in __close_file_table_ids() by removing the
volatile file ID from the owning IDR before dropping the IDR
reference
* tag 'v7.2-rc5-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: use memcmp() to compare ClientGUIDs
ksmbd: reject repeated SMB2 NEGOTIATE requests
ksmbd: fix use-after-free in __close_file_table_ids()
Pull ata fixes from Damien Le Moal:
- Fix PCI resource initialization in the sata_mv driver to keep legacy
Marvell boards functional (Rosen)
- Fix ahci_ceva driver initialization error path (Radhey)
- Fix libata header file to remove a kernel doc compilation warning
(Randy)
- Increase the timeout for the STANDBY IMMEDIATE command to avoid
suspend failures with drives that are slow to respond to this command
(Matt)
- Fixes for the handling of timed out commands in the presence of
deferred non-NCQ commands, to avoid excessive delays in executing the
error handler (me)
- Disable link power management for a couple of WD drives that have
been identified as not functioning properly when power management is
used (Niklas)
- Fix the device iteration loop when checking for link power management
support to correctly handle port multiplier setups (Niklas)
* tag 'ata-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-sata: fix ata_scsi_lpm_supported() iteration
ata: libata-core: Disable LPM on WD Green 2.5 480GB
ata: libata-core: Disable LPM on some WD drives
scsi: libsas: terminate deferred commands on time out
ata: libata-scsi: schedule deferred atapi command
ata: libata-scsi: terminate deferred commands on time out
ata: libata-eh: Increase STANDBY IMMEDIATE timeout
ata: libata: avoid kernel-doc warnings
ata: ahci_ceva: fix error paths in ceva_ahci_platform_enable_resources()
ata: sata_mv: accept 1 or 2 resources in platform probe
In rb_allocate_cpu_buffer(), cpu_buffer->subbuf_ids is allocated using
kcalloc() when buffer->remote is non-NULL. If a subsequent page allocation
fails (e.g., ring_buffer_desc_page() returns NULL or rb_allocate_pages()
fails), execution jumps to fail_free_reader.
While __free(kfree) automatically frees the outer cpu_buffer structure
at scope exit, kfree(cpu_buffer) does not recursively free nested heap
pointers such as cpu_buffer->subbuf_ids, resulting in a memory leak.
Fix this by explicitly freeing cpu_buffer->subbuf_ids in the
fail_free_reader error unwinding path when cpu_buffer->remote is set.
Link: https://patch.msgid.link/178550740672.380917.6067449683620196150.stgit@devnote2
Fixes: 2e67fabd8b ("ring-buffer: Introduce ring-buffer remotes")
Assisted-by: Antigravity:gemini-3.6-flash
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull block fixes from Jens Axboe:
- A set of fixes for s390/dasd, via Stefan
- Fix for a missing stop of the timeout timer, if a disk has never been
added
- Clear kernel owned fields on ublk setup by default
* tag 'block-7.2-20260731' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
s390/dasd: Fix undersized format-check buffer
s390/dasd: Fix potential NULL pointer dereference
s390/dasd: Fix path verification interrupted by concurrent dasd_sleep_on_immediatly
block: stop the timeout timer when releasing a never added disk
ublk: reset kernel-owned dev_info fields in ublk_ctrl_add_dev()
Pull io_uring fixes from Jens Axboe:
- Fix for a bug in how length caps are handled in multishot, and along
with it, a generic fix for avoiding these kinds of conversion issues
in the future.
- Ensure that task restrictions are always preserved across exec.
- Revert of the io_uring controlled epoll restriction, which disallowed
nested contexts. Turns out that libuv is already using it like that,
so we cannot simply remove it, sadly.
- Fix for a reference leak in the zcrx code.
* tag 'io_uring-7.2-20260731' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: preserve task restrictions across exec
io_uring/zcrx: don't clear master_ctx from the import path
Revert "io_uring/epoll: disallow adding an epoll file to an epoll context"
io_uring/kbuf: cap buffer selection length at MAX_RW_COUNT
io_uring/net: initialize mshot_len for send
Pull drm fixes from Dave Airlie:
"Weekly pulls request. As expected there is more AMD this week since
Alex was off last week, vmwgfx looks to have been hit with the AI
stick a bit and mediatek as well. Otherwise some minor fixes across
the board, the new normal definitely seems to be a thing.
dp:
- Restrict some DP bandwidth calculations to HDMI DFP
bridge:
- Fix small leak in bridge/display-connector
mediatek:
- Check CRTC state before freeing
- mtk_hdmi: Fix DDC adapter double put in v2
- mtk_hdmi_common: take i2c adapter module reference
- mtk_dsi: Enable HS clock only at pre-enable
- ovl_adaptor: balance component registrations
amdgpu:
- VCN 5.3 fix
- UserQ fixes
- GEM close optimization
- HDMI AV mute fix
- UML build fixes
- GFXOFF residency metrics fixes
- SMU 15 fixes
- debug_vm fix
- PSP 15 fixes
- NBIO 7.11.5 fix
- pptable use after free fix
- gpu metrics fetch fix
- DC viewport fix
- DML2.1 fix
- i2c retimer spam fix
- UMD profile pstate fix
- Power metrics format cleanup
- GTT size fix on APUs
- DC context logging fix
- PM sysfs fix for APUs
- Follow on pageflip timeout fix
amdkfd:
- Various bounds checking fixes
- Mutex locking fix
i915/xe:
- Check no-DMA huge-pte cases before DMA segment test
- sink FRL rate fix
- 200ms fix for TMDS scrambler status
vmwgfx:
- Improve various size checks and limit checks
- Fix oops when submitting invalid execbuf ioctl
- Correctly lock in vmfwgx fence signaling path
- More validation of execbuf ioctl
- Fix oops in vmwgfx vkms init failure path
- Overflow handling in shader path
panthor:
- Improve firmware validation
imagination:
- Improve imagination trace points.
qaic:
- Fix QAIC transaction length check"
* tag 'drm-fixes-2026-08-01' of https://gitlab.freedesktop.org/drm/kernel: (59 commits)
drm/i915/hdmi: Poll for 200 msec for TMDS_Scrambler_Status
drm/amd/display: Exit idle optimizations before programming
drm/amd/pm: hide pp_table sysfs on APUs
accel/qaic: use sizeof(*trans_hdr) for transaction length check
drm/panthor: validate firmware interface structure sizes
drm/xe/pt: check no-DMA huge-pte cases before DMA segment test
drm/imagination: Update the trace point pvr_job_submit_fw()
drm/i915/dp: Ignore the sink's DSC max FRL rate without a PCON DSC encoder
drm/mediatek: ovl_adaptor: balance component registrations
drm/mediatek: mtk_dsi: Enable HS clock only at pre-enable
drm/dp: Read the PCON max FRL bandwidth only for HDMI DFPs
drm/amd/display: use proper context for logging
drm/amdgpu: cap GTT size to physical RAM on APUs
drm/amd/pm: use milliwatts for GPU power sensors
drm/amdgpu: restore UMD profile pstate after runtime resume
drm/amd/display: Silence link_dpms I2C retimer failures
drm/amdkfd: hold event_mutex while checkpointing CRIU events
drm/amd/display: check if dml21_add_phantom_plane() is successful
drm/amd/display: Fix divide-by-zero in calculate_mcache_setting on zero viewport
drm/amd/display: Add AV mute wait frames to dce110_set_avmute
...
Pull devicetree fixes from Rob Herring:
- Fix NULL bus dereference in of_pci_range_parser_one()
- Prevent out-of-bounds access when too many dynamic reserved memory
regions are defined
* tag 'devicetree-fixes-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of/address: Fix NULL bus dereference in of_pci_range_parser_one()
of: reserved_mem: prevent OOB when too many dynamic regions are defined
Pull hyper-v fixes from Wei Liu:
- Multiple fixes for the MSHV driver (Stanislav Kinsburskii, Wei Liu,
Yi Xie, Yousef Alhouseen)
- Multiple fixes for the VMBus driver (Hardik Garg, Michael Kelley,
Sebastian Andrzej Siewior)
* tag 'hyperv-fixes-signed-20260731' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
mshv_vtl: bounds-check cpu index in vtl mmap fault handler
mshv: Publish VP to pt_vp_array before installing the file descriptor
Drivers: hv: vmbus: add VTL2 redirect connection ID
mshv: Order pt_vp_array publish against irqfd assertion path
mshv: Fix missing error code on VP allocation failure
mshv: Fix level-triggered check on uninitialized data
mshv: Fix race in mshv_irqfd_deassign
mshv: Use kfree_rcu in mshv_portid_free
mshv: Fix sleeping under spinlock in mshv_portid_alloc
mshv: Fix duplicate GSI detection for GSI 0
Drivers: hv: vmbus: Remove vmbus_irq_initialized
Drivers: hv: vmbus: Replace lockdep_hardirq_threaded() with lockdep annotation
mshv_vtl: fix fd leak in mshv_ioctl_create_vtl()
mshv_vtl: clear hypercall output before copyout
Drivers: hv: vmbus: Set DMA coherent mask for VMBus devices
mshv: fix hv_input_get_system_property struct
Pull RTLA fix from Steven Rostedt:
- Fix timerlat top actions triggering on signal
Fix a bug in RTLA's timerlat top actions feature where on-threshold
actions are triggered on any signal, regardless of whether a latency
spike had actually occurred during the measurement.
The return retval was checked for non-zero to do actions. But if a
signal came in, it returns a negative and actions were being
incorrectly triggered when they should not have been.
* tag 'trace-tools-v7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rtla/timerlat_top: Fix on-threshold actions firing on signal
cpu is taken from pgoff & 0xffff. cpu_online() does not reject cpu >=
nr_cpu_ids, and per_cpu_ptr() can then walk off __per_cpu_offset.
Signed-off-by: Yi Xie <xieyi@kylinos.cn>
Reviewed-by: Naman Jain <namjain@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
mshv_partition_ioctl_create_vp() called anon_inode_getfd() before
publishing the new VP into partition->pt_vp_array. anon_inode_getfd()
includes fd_install(), so the fd was live in current->files before the
publish ran.
A concurrent MSHV_RUN_VP ioctl on that fd does not serialise against the
in-progress MSHV_CREATE_VP — it takes vp->vp_mutex, not the partition
mutex. Once the VP starts running and traps, mshv_intercept_isr() can look
up partition->pt_vp_array[vp_index] and observe NULL, silently dropping the
intercept message.
Split the fd creation: reserve an fd with get_unused_fd_flags(), create the
file with anon_inode_getfile(), publish the VP via smp_store_release(), and
finally call fd_install() as the userspace-visibility commit point.
Fixes: 621191d709 ("Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs")
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
VMBus sends CHANNELMSG_INITIATE_CONTACT through a Hyper-V message
connection ID. Older protocol versions use VMBUS_MESSAGE_CONNECTION_ID,
while protocol version 5.0 and newer normally use
VMBUS_MESSAGE_CONNECTION_ID_4.
For a VTL2 kernel using VMBus protocol 5.0 or newer, the host
may expect INITIATE_CONTACT on either the redirect connection ID or
VMBUS_MESSAGE_CONNECTION_ID_4. There is no capability indication that
identifies which ID is active, so the driver must determine it at runtime.
During VMBus negotiation, the redirect ID is tried first because it is
used by VTL2 configurations with VMBus redirection enabled. If the
redirect ID is unavailable, the host rejects it synchronously with
HV_STATUS_INVALID_CONNECTION_ID, allowing fallback to the standard ID.
Return a distinct error for an invalid Initiate Contact connection ID so
this fallback does not mask other post-message failures or
protocol-version rejections. Preserve the existing connection ID
selection for older protocol versions or when running below VTL2.
Signed-off-by: Hardik Garg <hargar@linux.microsoft.com>
Reviewed-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Naman Jain <namjain@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
mshv_partition_ioctl_create_vp() initialises a VP struct (allocations,
mutex_init, init_waitqueue_head, page mappings) and then publishes the
pointer into partition->pt_vp_array. Several ISR paths read this array
locklessly: the intercept ISR, the two scheduler ISRs, and
mshv_try_assert_irq_fast() on the irqfd fast path.
Of these, only mshv_try_assert_irq_fast() can structurally race the
publish. It runs from an eventfd waker without holding pt_mutex, and
MSHV_IRQFD does not require the target lapic_apic_id (== vp_index) to
refer to an existing VP at registration time. A user can therefore
register an irqfd targeting a yet-to-be-created VP, then trigger
mshv_try_assert_irq_fast() concurrently with MSHV_CREATE_VP for the
same index. On weakly-ordered architectures the reader can observe a
non-NULL pointer in pt_vp_array before the initialising stores to the
VP struct become visible, leading to use of partially-initialised
fields (e.g. vp_register_page).
The other ISR readers cannot reach this race: the hypervisor will not
generate intercept or scheduler messages for a VP that has never been
told to run, and the user can only call MSHV_RUN_VP on the VP fd
returned by MSHV_CREATE_VP, which by construction is returned after
the publish. Leave those readers as plain loads.
Use smp_store_release() in mshv_partition_ioctl_create_vp() to publish
the pointer, and pair it with smp_load_acquire() in
mshv_try_assert_irq_fast(). On x86 these compile to plain accesses
under TSO; on ARM64 they emit one-instruction acquire/release barriers,
acceptable on this fast path.
The destroy-side path (destroy_partition() clearing pt_vp_array[i] to
NULL after kfree(vp)) has a separate ordering and lifetime concern
that is out of scope here.
Fixes: 621191d709 ("Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs")
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
In mshv_partition_ioctl_create_vp(), when kzalloc for the VP struct
fails, the code jumps to the cleanup path without setting ret. At that
point ret is 0 from the preceding successful mshv_vp_stats_map() call,
so the function returns success to userspace despite having failed to
create the VP. No fd is installed and no VP is registered in pt_vp_array,
but userspace has no way to know the operation failed.
Set ret to -ENOMEM before jumping to the cleanup path.
Fixes: 621191d709 ("Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs")
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
In mshv_irqfd_assign(), the level-triggered validation for resample
irqfds checks irqfd_lapic_irq.lapic_control.level_triggered before
mshv_irqfd_update() has populated the field. Since the irqfd struct is
zero-allocated, level_triggered is always 0 at that point, causing the
check to always reject resample irqfds with -EINVAL. This makes
level-triggered interrupt resampling — used to avoid interrupt storms
with assigned devices — completely non-functional.
Move the check after the mshv_irqfd_update() call, which resolves the
IRQ routing entry and populates irqfd_lapic_irq with the actual trigger
mode.
Fixes: 621191d709 ("Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs")
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
mshv_irqfd_deactivate() and the hlist traversal of pt_irqfds_list
require pt->pt_irqfds_lock to be held, but mshv_irqfd_deassign()
omits it. This races with the EPOLLHUP path in mshv_irqfd_wakeup(),
which does take the lock before calling mshv_irqfd_deactivate().
Additionally, mshv_irqfd_deactivate() uses hlist_del() which poisons
the node pointers rather than resetting them. Since
mshv_irqfd_is_active() relies on hlist_unhashed() (checks pprev ==
NULL), a poisoned node still appears active. If a concurrent path calls
mshv_irqfd_deactivate() again on the same irqfd, the guard fails to
prevent a double hlist_del() on poisoned pointers.
Fix both issues:
- Add the missing spin_lock_irq/spin_unlock_irq around the list
traversal in mshv_irqfd_deassign(), matching mshv_irqfd_release().
- Use hlist_del_init() instead of hlist_del() so the node is properly
marked as unhashed after removal, making the is_active guard reliable.
Fixes: 621191d709 ("Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs")
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
mshv_portid_free() uses synchronize_rcu() followed by kfree() to
reclaim port table entries. This blocks the caller until a full RCU
grace period elapses, which is unnecessary since the same module already
uses the non-blocking kfree_rcu() pattern in mshv_port_table_fini().
Replace with kfree_rcu() to avoid the blocking wait and keep the
reclamation strategy consistent across the file.
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Pull spi fixes from Mark Brown:
"The drip of driver specific fixes, mostly from the device vendors
themselves, keeps on coming in. There's more than I'd like right now
but equally nothing hugely alarming"
* tag 'spi-fix-v7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-nxp-fspi: propagate clock reconfig failures in nxp_fspi_select_mem()
spi: spi-nxp-fspi: enter stop mode before reconfiguring MCR0 and DLL
spi: spi-nxp-fspi: add per-SoC SDR/DTR clock rate limits for all supported SoCs
spi: spi-qpic-snand: write the feature value before executing SET_FEATURE
spi: spi-cadence: Move TX FIFO full busy-wait into FIFO
spi: qcom-qspi: Correct max DMA length to avoid 64K boundary failure
spi: spacemit: prepare both DMA descriptors before submitting
Pull pci fixes from Bjorn Helgaas:
- Remove Karthikeyan Mitran from Mobiveil MAINTAINERS PCIe entry since
email bounces (Manivannan Sadhasivam)
- Preserve i.MX6Q, i.MX6QP, and i.MX6SX Root Port MSI/MSI-X
Capabilities when using iMSI-RX to work around hardware defect
(Soeren Moch)
- Reorder i.MX6Q/DL PHY power up to fix boot hang regression (Richard
Zhu)
* tag 'pci-v7.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: imx6: Fix i.MX6Q/DL boot hang caused by improper PHY power sequencing
PCI: imx6: Keep i.MX6 Root Port MSI/MSI-X Capabilities with iMSI-RX to work around hardware bug
MAINTAINERS: Drop Karthikeyan Mitran from Mobiveil PCIe entry
Pull hwmon fixes from Guenter Roeck:
"Most of the patches are fixes for pre-existing issues reported by
Sashiko. I suspect we'll see a lot of those for a while.
- adt7470:
- Fix PWM auto temp state array and bounds check
- Fix divide-by-zero TOCTOU crash in fan speed read
- Use cached PWM frequency value
- Fix swapped PWM3 and PWM4 auto mode masks
- Fix temperature alarm logic in hwmon_temp_read()
- Fix busy-loop and I2C flooding in update thread
- Fix cache updated before hardware write on I2C error
- Fix fans stuck in manual mode on I2C errors
- ina2xx: Fix various overflow issues
- ltc4282: Fix reading the minimum alarm voltage
- lm63: Mask PWM frequency multiplier to supported bits
- lm90: Only report alarms if driver is ready
- nct6775-core:
- Prevent access to unsupported weight registers
- Fix number of temperature registers for NCT6116
- npcm750-pwm-fan: stop fan timer on device detach
- nzxt-smart2: DMA-align output buffer
- pmbus:
- Fix return value from pmbus_update_byte_data()
- Notify on the hwmon device, not the i2c client
- sht3x: Fix unaligned accesses"
* tag 'hwmon-for-v7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (npcm750-pwm-fan): stop fan timer on device detach
hwmon: (pmbus) Fix return value from pmbus_update_byte_data()
hwmon: (adt7470) Fix PWM auto temp state array and bounds check
hwmon: (adt7470) Fix divide-by-zero TOCTOU crash in fan speed read
hwmon: (adt7470) Use cached PWM frequency value
hwmon: (adt7470) Fix swapped PWM3 and PWM4 auto mode masks
hwmon: (adt7470) Fix temperature alarm logic in hwmon_temp_read()
hwmon: (adt7470) Fix busy-loop and I2C flooding in update thread
hwmon: (adt7470) Fix cache updated before hardware write on I2C error
hwmon: (adt7470) Fix fans stuck in manual mode on I2C errors
hwmon: (nct6775-core) Prevent access to unsupported weight registers
hwmon: (lm63) Mask PWM frequency multiplier to supported bits
hwmon: (nzxt-smart2) DMA-align output buffer
hwmon: (lm90) Only report alarms if driver is ready
hwmon: (sht3x) Fix unaligned accesses
hwmon: (ltc4282) Fix reading the minimum alarm voltage
hwmon: (ina2xx) Fix various overflow issues
hwmon: (pmbus/core) notify on the hwmon device, not the i2c client
hwmon: (nct6775-core) Fix number of temperature registers for NCT6116
Pull sound fixes from Takashi Iwai:
"A collection of sound fixes for the 7.2-rc6 cycle. Again, it became
far larger than wished; I'll throttle from now on.
There are no major changes, just a normal flow of small fixes. The
majority of them are device-specific quirks and ASoC SDCA/codec
updates, but it includes a few ALSA core fixes as well.
ALSA Core:
- Fix for ALSA sequencer timer division-by-zero
- Fix potential race in ALSA timer core
- Wake up linked drain waiters on PCM stream unlink
- Fix double-free of converter objects on UMP rawmidi error path
USB-audio:
- Fix a few potential out-of-bounds access bugs
- Prevent stack info leak in RME Digiface status
- Fix UAF during UMP endpoint destruction
- Fix UAF at error handling during probe in Line6 6fire driver
- Quirks for C-Media CM6206, Corsair Virtuoso, Razer Barracuda X 2.4,
JKY Technology, and generic USB headphones
HD-audio:
- Quirks for HP Victus 16, HP Dragonfly Folio G3, Lenovo Legion 7, HP
Laptop 14s, Acer Nitro 5, TongFang X6SP45xU, Infinix INBOOK X3, and
HP Pavilion All-in-One
ASoC:
- Comprehensive cleanups and bug fixes for SoundWire/SDCA drivers
- DMI quirks for AMD ACP/YC on Lenovo Legion 7, Acer Aspire, MSI
Crosshair A16, and ASUS ExpertBook
- ACPI match table entry for SOF RT5682 on Intel Nova Lake
- Device-specific mixer / clock, irq fixes for TI TAS2562, TI
TAS2781, Sophgo cv1800b ADC, Maxim MAX98090/98095, FSL ASRC/EASRC
and Realtek RT5640"
* tag 'sound-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (53 commits)
ASoC: rt722: reset codec to fix abnormal sound
ASoC: dt-bindings: realtek,rt5640: Make interrupts optional
ALSA: hda/realtek: Add mute LED quirk for HP Victus 16-e0xxx (MB 88ED)
ALSA: usb-audio: Add GET_SAMPLE_RATE quirk for C-Media CM6206
ALSA: usb-audio: Clamp frame size in implicit-feedback mode
ALSA: usb-audio: Fix DMA buffer out-of-bounds write when fill_max is set
ALSA: usb-audio: Add quirk for Corsair Virtuoso (later revision)
ALSA: pcm: wake linked drain waiters on unlink
ASoC: amd: acp: Add DMI quirk for Lenovo Legion 7 15ASH11
ASoC: sophgo: return 1 on volume change in cv1800b_adc_volume_set()
ASoC: tas2781: Use correct calibration data for SINEGAIN2 register
ASoC: SDCA: Move kcontrol search out of IRQ
ASoC: SDCA: Switch to fixup_controls callback for IRQ registration
ASoC: Add a component fixup_controls callback
ASoC: SDCA: Populate IRQ data earlier
ASoC: SDCA: Remove devm from primary IRQ cleanup
ASoC: SDCA: Add sdca_irq_cleanup_late()
ASoC: SDCA: Rename sdca_irq_allocate() to include devm
ALSA: hda/realtek: Add quirk for HP Dragonfly Folio G3 2-in-1 (103c:8a05)
ALSA:hda/realtek:ALC269 fixup for Legion 7 15ASH11 Mic Mute LED
...
Pull UML fix from Richard Weinberger:
- Fix use-after-free in UML's vector networking driver
* tag 'uml-for-linus-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
um: vector: fix use-after-free in vector_mmsg_rx()
Pull misc fixes from Andrew Morton:
"12 hotfixes. 6 are cc:stable. 9 are for MM.
There's a two-patch series from Nico which fixes a couple of PMD level
mTHP accounting bugs and a two-patch series from Chris Gellermann
which addresses mishandling of getline() in selftests. All the
remainder are singletons - please see the changelogs for details"
* tag 'mm-hotfixes-stable-2026-07-30-19-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
selftests/mm: fix potential wild pointer access of getline due to missing init
selftests/clone3: fix wild pointer access of getline due to missing init
mm/page_reporting: use system_freezable_wq to fix UAF during suspend
mm: vmscan: abort proactive reclaim early when freezing for suspend
MAINTAINERS: update Nico Pache's email address
arm64, mailmap: update email address for Peter Collingbourne
MAINTAINERS: update address for Burak Emir
mm/huge_memory: unlock i_mmap_rwsem before releasing after-split folios
riscv/mm: use physical alignment for vmemmap_start_pfn
mm/migrate: exclude hugetlb folios from MTHP_STAT_NR_ANON accounting
mm: decrement MTHP_STAT_NR_ANON in free_zone_device_folio()
mm: memcg: initialize *locked in memcg1_oom_prepare() stub
fmt_buffer_size in dasd_eckd_check_device_format() is declared as
int, even though one of the multiplicands, sizeof(struct eckd_count),
is a size_t. The expression
trkcount * rpt_max * sizeof(struct eckd_count)
is therefore correctly evaluated at 64-bit width, but the result is
silently truncated when it is stored back into the 32-bit
fmt_buffer_size variable. For a sufficiently large track range
(start_unit/stop_unit are caller-controlled) this truncation
yields a buffer size far smaller than the number of tracks actually
requested. kzalloc() then succeeds with an undersized allocation,
while the subsequent channel program build still operates on the
untruncated track count and writes past the end of that buffer.
Compute the buffer size with check_mul_overflow() and keep it in a
size_t, so that a value that no longer fits results in -EINVAL
instead of a silently truncated allocation size.
Fixes: 8fd575200d ("s390/dasd: Add new ioctl BIODASDCHECKFMT")
Cc: stable@vger.kernel.org #4.7
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://patch.msgid.link/20260727142840.567286-4-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When all channel paths to a DASD device are lost and subsequently
recovered, the path event handler starts one IO per path via
dasd_sleep_on_immediatly() to execute read configuration data (RCD) with
high priority.
dasd_sleep_on_immediatly() works by terminating the currently running
request before inserting the new request.
If a concurrent caller, such as the attention handler
dasd_eckd_check_attention_work() or the summary unit
check handler summary_unit_check_handling_work(), also calls
dasd_sleep_on_immediatly() while a path verification RCD is in progress,
the RCD gets terminated.
The problem is that a terminated request transitions from CLEARED to
TERMINATED without going through the normal retry path in
__dasd_device_process_ccw_queue.
The RCD therefore returns -EIO, and the affected paths remain
non-operational after recovery. RCD CQRs used for path verification
already carry the DASD_CQR_VERIFY_PATH flag.
Extend _dasd_term_running_cqr() to check this flag: instead of terminating
such a request, return -EAGAIN. In dasd_sleep_on_immediatly(), loop on
-EAGAIN with a short sleep, waiting for the path verification request to
complete before inserting the new request.
This is consistent with the already indefinite wait_event() that
dasd_sleep_on_immediatly() uses for its own request, and all other callers
(attention handler, summary unit check handler, reserve/release/steal-lock)
benefit automatically without requiring changes.
Reviewed-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://patch.msgid.link/20260727142840.567286-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The helper function _ip_cprb_helper() uses internal buffer memory for
building and processing CPRBs. After use this buffer was never
scrubbed which could lead to leaving for example clear key material in
memory which could be exposed via tricky reuse of this same memory.
Extend the _ip_cprb_helper() function with another parameter 'scrub'
used to steer scrubbing of this buffer. So now the caller has the
opportunity to decide if scrubbing is needed or not.
Extend the clear key to secure key token import process in function
cca_clr2cipherkey() to tell the helper function from above to scrub
the cprb buffer when the clear key value is part of the request data.
Add explicit scrubbing on return from function cca_clr2cipherkey() for
the random EXOR buffer and the cprb buffer.
Overall this cleans the internal used buffer in case of clear key
import to prevent sensitive data to get exposed.
Fixes: 4bc123b18c ("s390/zcrypt: Add low level functions for CCA AES cipher keys")
Cc: stable@vger.kernel.org
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The domain value is extracted from a given CCA or EP11 ioctl struct
when a CPRB is about to be sent. Thus this is a user controlled value.
Under some special conditions (custom device node used, administrative
load) this value is used as an array index after bounds checking, but
without speculation barrier.
Add the missing array_index_nospec() call to prevent speculative
execution where this domain value is used.
Fixes: cfd68b3309 ("s390/zcrypt: Filter admin CPRBs on custom devices")
Cc: stable@vger.kernel.org
Reported-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Finn Callies <fcallies@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
There is a wrong upper limit check for the domain value when an EP11
CPRB is processed for sending to a crypto card. This check is only
active on custom device nodes but may lead to access heap memory
behind perms->adm when an administrative CPRB is sent.
Add correct limit (AP_DOMAINS = 256) checking to fix this.
Fixes: cfd68b3309 ("s390/zcrypt: Filter admin CPRBs on custom devices")
Cc: stable@vger.kernel.org
Reviewed-by: Finn Callies <fcallies@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add validation of both the actual key buffer size and token length
fields in all the cca_check_sec*token() functions. Additionally check
in cca_gencipherkey() for possible underflow with returned key size.
The CCA token structures contain user-controlled len fields that
were used in operations without proper validation against both the
actual buffer size and minimum token structure size. An attacker
could set this field larger than the actual buffer size, leading to
reading beyond buffer boundaries. This may result in a kernel crash or
exposure of memory via sending this as part of a request down to the
crypto card. Also an attacker could have used a very small len value
and thus enforce a buffer under-run which may produce similar effects
as a over-read.
So now a key must
- key buf length must be at least sizeof the token struct
- the key len field inside the token must fit into the range of
sizeof key token struct ... key buf length
Fixes: 4bc123b18c ("s390/zcrypt: Add low level functions for CCA AES cipher keys")
Cc: stable@vger.kernel.org
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
cca_ecc2protkey() derives the copy length for the CPRB parameter
block directly from the length field in the key token. Reject the
request early if the token length exceeds the available space in the
parameter block.
Fixes: fa6999e326 ("s390/pkey: support CCA and EP11 secure ECC private keys")
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Cc: stable@vger.kernel.org # 5.10+
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
cca_cipher2protkey() derives the copy length for the CPRB parameter
block directly from the length field in the key token. Reject the
request early if the token length exceeds the available space in the
parameter block.
Fixes: 4bc123b18c ("s390/zcrypt: Add low level functions for CCA AES cipher keys")
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Cc: stable@vger.kernel.org # 5.4+
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
On a machine without PCI memory-I/O (MIO) support or when running with
pci=nomio the s390 specific PCI MMIO write syscall checks if the MMIO
cookie is above ZPCI_IOMAP_ADDR_BASE as a sanity check before even
trying to perform the MMIO. If this check fails the return value was
left unchanged and thus 0 from prior operations falsely indicating
success. This could potentially confuse user-space into falsely
believing the MMIO, on a mapping not valid for MMIO was successful.
Fix this by setting the return value to -EFAULT prior to the check
following the same pattern as elsewhere in the same function.
Cc: stable@vger.kernel.org
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Fixes: a67a88b0b8 ("s390/pci: remove races against pte updates")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
iomap_split_ioend can split bios that already come from
iomap_ioend_bioset and thus deadlock when the bioset is exhausted.
Add a separate bio_set to avoid this deadlock.
Christian Brauner <brauner@kernel.org> says:
Mark iomap_ioend_split_bioset static as it is only used in ioend.c,
fixing the sparse warning reported by the kernel test robot.
Fixes: 5fcbd555d4 ("iomap: split bios to zone append limits in the submission handlers")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260629125229.3400726-1-hch@lst.de
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Forking a task that has a pending uretprobe can oops the kernel with a
NULL pointer dereference in the clone() path:
BUG: kernel NULL pointer dereference, address: 0000000000000018
Oops: 0002 [#1] SMP NOPTI
RIP: 0010:hprobe_expire
CR2: 0000000000000018
Call Trace:
uprobe_copy_process
copy_process
kernel_clone
__x64_sys_clone
do_syscall_64
entry_SYSCALL_64_after_hwframe
This was found on real hosts on Meta fleet.
I've got the impression that this is what is happening:
CPU 1 CPU 2 (traced task)
----- -------------------
hit uprobe, prepare_uretprobe():
hprobe LEASED, refcount >= 1
uprobe_unregister()
put_uprobe(): refcount -> 0
fork() -> dup_utask()
hprobe_expire(hprobe, true)
try_get_uprobe() -> NULL
get_uprobe(NULL) <-- Oops
Only take the extra reference when the uprobe is non-NULL; a NULL means
it is gone and is the correct value to return.
Fixes: dd1a756778 ("uprobes: SRCU-protect uretprobe lifetime (with timeout)")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260729-uprobe-v1-1-61896b87c867@debian.org
Pull power supply fixes from Sebastian Reichel:
- Documentation build fix for bd71828
- max17040: handle missing status supplier
- macsmc: Support macOS 27 SMC firmware
- bq25890: fix the -10 C NTC lookup entry
* tag 'for-v7.2-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: bq25890: fix the -10 C NTC lookup entry
power: supply: macsmc: Support macOS 27 SMC firmware
power: supply: max17040: handle missing status supplier
power: supply: bd71828: add a terminating table border
ClientGUID is a fixed-size binary value and can contain embedded NUL
bytes. strncmp() stops comparing at the first NUL byte, so different
ClientGUID values can incorrectly be treated as equal.
Use memcmp() in SMB3 multichannel session binding and
FSCTL_VALIDATE_NEGOTIATE_INFO to compare all SMB2_CLIENT_GUID_SIZE
bytes.
Fixes: f5a544e3ba ("ksmbd: add support for SMB3 multichannel")
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Reported-by: Samu <nomomentomori@gmail.com>
Suggested-by: Samu <nomomentomori@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Unauthenticated client can send multiple successful SMB2 NEGOTIATE
requests on one connection before SESSION_SETUP. While the connection is
in KSMBD_SESS_NEED_SETUP, smb2_handle_negotiate() accepts another
SMB3.1.1 NEGOTIATE and overwrites conn->preauth_info with a new allocation.
Only the final allocation is freed when the connection is released, leaking
one object for every additional successful request.
A repeated SMB2 NEGOTIATE after a dialect has been selected is a protocol
violation. MS-SMB2 section 3.3.5.4 requires the server to disconnect
without replying in this case. Set the connection exiting when rejecting
the request, in addition to suppressing the response.
Reject SMB2 NEGOTIATE unless the connection is new or is waiting for the
SMB2 NEGOTIATE that follows an SMB1 multi-protocol negotiate. Serialize
both SMB1 and SMB2 negotiation paths under conn->srv_mutex, since they
update connection-wide dialect and negotiation state.
Move the locking contract to ksmbd_smb_negotiate_common(), where the state
and dialect are selected, and add ksmbd_conn_new() for consistent state
access.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Reported-by: Runa Takemoto <takemotoruna223@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
A ksmbd_file can remain alive after logical close while another session
holds a temporary reference obtained through ksmbd_lookup_fd_inode().
ksmbd_close_fd() currently marks the file closed and drops the idr-owned
reference, but leaves the pointer published in the closing session's idr
until the final reference is dropped.
If the foreign holder performs the final ksmbd_fd_put(), __put_fd_final()
supplies the foreign session's file table to __ksmbd_close_fd(). The object
is then freed without being removed from its owner's idr, and the owner
session later dereferences the stale pointer during file-table teardown.
Remove the volatile id from the owner's idr while ksmbd_close_fd() still
holds that table's lock, and clear volatile_id before dropping
the idr-owned reference. A later foreign final put then only performs
physical destruction and cannot remove the object from the wrong table.
Fixes: 8510a043d3 ("ksmbd: increment reference count of parent fp")
Reported-by: Yunseong Kim <yunseong.kim@est.tech>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull iommufd fixes from Jason Gunthorpe:
"Several bug fixes found by tools and fuzzing:
- Incorrect domain passed during replace to ack faults
- Block the access API from using dmabuf
- Missing unlock on error unwind
- Race seeing a partially setup vdevice in the xarray
- Do not allow vdevices to have multiple stream ids in SMMUv3
- Possible UAF if racing faults with domain changes"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommu/iommufd: Fix IOPF group ownership UAF
iommu/arm-smmu-v3-iommufd: Require exactly one Stream ID for a vDEVICE
iommufd/viommu: Publish a vDEVICE only after vdevice_init() succeeds
iommufd/viommu: Release the igroup lock on the vdevice_size error path
iommufd: Reject DMABUF pages from the access pin path
iommufd: Fix wrong hwpt passed to iommufd_auto_response_faults on replace
Pull audit fixes from Paul Moore:
- Fix potential integer overflows in audit_log_n_string()
Similar to the earlier fix to audit_log_n_hex() that you merged
earlier in July. Expect a cleaner, and generally better fix for these
functions in an upcoming merge window, but this addresses the problem
in a small patch that should be easy for people to backport.
- Fix potential use-after-free in audit_del_rule()
* tag 'audit-pr-20260730' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: fix potential use-after-free in audit_del_rule()
audit: fix potential integer overflow in audit_log_n_string()
Per-task restrictions apply to all rings created by a task. Once
installed, they should not be dropped across exec.
For a task that has used io_uring, the exec cancellation path calls
__io_uring_free(). This frees both the task context and the per-task
restriction, so a ring created after exec is unrestricted.
Split task context cleanup into io_uring_free_tctx(), and use it from
the exec cancellation path. Keep __io_uring_free() for final task
cleanup, where both the context and restriction are released.
Fixes: ed82f35b92 ("io_uring: allow registration of per-task restrictions")
Cc: stable@vger.kernel.org # 7.1+
Signed-off-by: Kyumin Lee <fyonglkm@gmail.com>
Link: https://patch.msgid.link/20260730192734.459247-1-fyonglkm@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
HDMI 2.0 section 6.1.3.1 specifies that after enabling
Scrambling_Enable and starting scrambled video transmission, the source
should poll Scrambling_Status until it reads 1 or until a timeout of
200 ms expires.
Add a polling step after enabling the HDMI port to check the scrambling
status when HDMI scrambling is enabled.
On some HDMI 2.0 sinks, omitting this check can result in 4K@60Hz
(594 MHz) failing to come up correctly because the sink has not yet
finished its scrambling setup. In practice, waiting for the scrambling
status here fixes such sinks.
While this synchronous polling is not itself explicitly required for
correct modeset sequencing, HDMI 2.0 section 6.1.3.1 does recommend it
as the way for the source to verify that the TMDS link is functioning
correctly with scrambling enabled.
v3:
- Add explicit HDMI 2.0 section reference in code comment
- Clarify commit message around the observed sink fix
v2:
- Poll TMDS_Scrambler_Status for up to 200 ms instead of using a fixed
delay
Reported-by: Jerome Tollet <jtollet@cisco.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6868
Link: https://lore.kernel.org/dri-devel/20251230091037.5603-1-jerome.tollet@gmail.com/
Signed-off-by: Jerome Tollet <jerome.tollet@gmail.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20260520022544.3097252-1-ankit.k.nautiyal@intel.com
(cherry picked from commit b7d51d65e4)
Fixes: 1595363788 ("drm/i915: enable scrambling")
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
import_zcrx() attaches an existing ifq to another ring. It never calls
zcrx_set_ring_ctx() and so never takes the ->master_ctx reference, but
its error path still passes @ctx to zcrx_unregister(), which clears
->master_ctx and drops its percpu_ref whenever ifq->master_ctx == ctx.
That condition is reachable. A ring that registers an ifq with a
non-zero event type_mask gets ->master_ctx pointed at itself, and
nothing stops it from exporting that ifq with ZCRX_CTRL_EXPORT and
importing the resulting fd back into the same ring. Failing the import
after the refcount bumps -- an argument page mapped PROT_READ makes the
copy_to_user() in import_zcrx() return -EFAULT -- then clears the
->master_ctx owned by the original registration, which is still live.
Refcounts stay balanced and nothing is freed early, so there is no
splat. The ring silently stops receiving ZCRX_EVENT_ALLOC_FAIL and
ZCRX_EVENT_COPY: zcrx_send_notif() returns early on a NULL
->master_ctx, and ->master_ctx is only ever set on a freshly allocated
ifq, so it cannot be restored without tearing the ring down.
Pass NULL instead, matching zcrx_box_release() and the zcrx_export()
error path. io_register_zcrx() only gets away with passing @ctx
because zcrx_set_ring_ctx() runs after its last goto err.
Fixes: 00d9148127 ("io_uring/zcrx: share an ifq between rings")
Signed-off-by: Woraphat Khiaodaeng <worapat.kd2@gmail.com>
Link: https://patch.msgid.link/20260730162741.1125-1-worapat.kd2@gmail.com
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
[axboe: add pavel edit]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull power management fixes from Rafael Wysocki:
"These fix issues related to cpufreq, in the ACPI CPPC library and the
generic CPPC cpufreq driver, in the powernow-k8 and amd-pstate
drivers, and in the schedutil governor:
- Allow fast frequency switching in the ACPI CPPC library only when
every supported control used by the driver callback has an address
space already accepted for fast access (Christian Loehle)
- Skip writes to unsupported performance controls in the ACPI CPPC
library (Christian Loehle)
- Update cppc_cpufreq_update_perf_limits() to read policy->min and
policy->max once and, if the lockless snapshot is inconsistent,
reduce the minimum to the observed maximum, along the lines of
cpufreq_driver_resolve_freq() (Christian Loehle)
- Fix a possible memory leak in the powernowk8_cpu_init() error paths
(Abdun Nihaal)
- Loosen the requirement on lowest nonlinear frequency != min freq in
the amd-pstate driver that is too tight for new systems some of
which actually have the lowest nonlinear frequency identical to the
minimum frequency (Mario Limonciello)
- Prevent amd-pstate from loading on unsupported hardware (Rong
Zhang)
- Address an initialization race in the schedutil governor when it
runs on multi-CPU cpufreq policies, by making it initialize all
per-CPU structures first and only then publish the per-CPU
utilization update hooks (Zhongqiu Han)"
* tag 'pm-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: powernow-k8: Fix possible memory leak in powernowk8_cpu_init()
ACPI: CPPC: Skip writes to unsupported performance controls
cpufreq/amd-pstate: Prevent the driver from loading on unsupported hardware
cpufreq/amd-pstate: Loosen requirement on lowest nonlinear frequency != min freq
cpufreq: schedutil: Publish util hooks only after all sg_cpu are initialized
cpufreq: cppc: Sanitize lockless policy limit snapshots
ACPI: CPPC: Check all controls for fast switching
io_ring_buffers_peek() builds an iovec array from provided buffers, and
that in turn can be handed off to a lower level provider. Be prudent and
cap the total size to MAX_RW_COUNT, which is the Linux default for how
much IO do to in a single call.
No bugs here, but it's a good preventative measure to avoid truncation
issues.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit:
6a8afb9fff ("io_uring/net: allow multishot receive per-invocation cap")
changed how io_mshot_prep_retry() set sr->len, and added the same
initialization in io_mshot_prep_retry(). But it neglected to touch the
send path, which may also uses the mshot retry path. Ensure that
sr->mshot_len always gets initialized correctly.
Fixes: 6a8afb9fff ("io_uring/net: allow multishot receive per-invocation cap")
Cc: stable@vger.kernel.org
Reported-by: Sung Keum <kambodi127@gmail.com>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull networking fixes from Paolo Abeni:
"This is again larger than usual: the backlog accumulated in the past weeks
is not done yet. I'm not aware of any known pending regression.
Including fixes from netfilter, Bluetooth, WiFi and CAN.
Current release - regressions:
- bluetooth: remove unnecessary hci_conn_get in create_conn_sync
- can: isotp: fix timer drain order, wakeup handling and tx_gen
ordering
- eth:
- tun/vhost: revert avoid ptr_ring tail-drop when a qdisc is
present
Previous releases - regressions:
- core: do not send ICMP/NDISC Redirects when peer allocation fails
- ipv6: take nexthop lock for f6i_list walks in replace check and
notify
- wifi: fix an ath12k MLO regression impacting WCN7850/QCC2072.
- netfilter: nf_tables: make nft_object rhltable per table
- af_unix: fix listen() succeeding on sockets in the wrong state
- openvswitch: fix potential UAF on meter attach failure
- bluetooth:
- fix advertising data UAFs
- avoid deadlocks in iso_sock_timeout
- smc: fix socket use-after-free during link group termination
- dpll: use pin owner's dpll ref for pin-level attribute reporting
- eth:
- veth: convert frag_list skbs before running XDP
- ice: wait for reset completion in ice_resume()
- igc: remove napi_synchronize() in igc_down()
- vxlan: use pskb_network_may_pull() for transmit path header pulls
Previous releases - always broken:
- xsk: fix AF_XDP multi-buffer Tx descriptor reclaim
- psp: fix NULL genl_sock deref race with concurrent netns teardown
- netfilter: widen NAT rewrite delta to s32 in sip_help_tcp()
- can: peak_usb: fix double free of transfer buffer on URB submit error
- dibs: fix use-after-free of dmb_node in loopback attach/detach/unregister
- sctp: prevent peer transport count overflow
- dsa: mt7530: error out on failed reads in MT7531 PHY polling
- eth:
- idpf: bound interrupt-vector register fill to the allocated array"
* tag 'net-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (156 commits)
qede: sync udp_tunnel ports outside qede_lock in the recovery path
net: openvswitch: fix potential UAF on meter attach failure
octeontx2-pf: Set correct sequence for carrier off and tx queue stop
net: libwx: fix FDIR ATR queue mismatch for software VLAN packets
net: dsa: realtek: use devm_mutex_init for l2_lock
net: dsa: realtek: use devm_mutex_init for vlan_lock
net: dsa: realtek: use devm_mutex_init for regmap lock
net: dsa: realtek: rtl8365mb: use devm_mutex_init for mib_lock
ptp: netc: fix potential interrupt storm caused by incorrect unbind order
net: mana: Return error code from mana_create_rxq()
net: openvswitch: fix skb leak on flow key update failure during ct
net: openvswitch: fix skb leak on flow key update failure during recirculation
net: stmmac: Fix E2E delay mechanism
net: dsa: mt7530: error out on failed reads in MT7531 PHY polling
net: dsa: mt7530: error out on failed reads in ATC/VTCR command polling
net: dsa: mt7530: check bus->read() errors in the MDIO regmap backend
Revert "tun/tap: add ptr_ring consume helper with netdev queue wakeup"
Revert "vhost-net: wake queue of tun/tap after ptr_ring consume"
Revert "ptr_ring: move free-space check into separate helper"
Revert "tun/tap & vhost-net: avoid ptr_ring tail-drop when a qdisc is present"
...
Pull gpio fixes from Bartosz Golaszewski:
- fix a memory leak in gpio-sloppy-logic-analyzer
- fix a regression in GPIO hog handling for hogs without direction
specified
- extend the critical section in IRQ handling in gpio-pca953x to cover
the reads from the direction register
- disable the interrupt on errors when restoring context in
gpio-pca953x
- apply the initial value when setting direction in gpio-by-pinctrl
- use raw spinlock for the register lock in gpio-pch to address locking
context issues
* tag 'gpio-fixes-for-v7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: pch: use raw_spinlock_t for the register lock
gpio: pca953x: fix cache_only and IRQ state on restore_context() failure
gpio: gpio-by-pinctrl: Apply initial value in direction output wrapper
gpio: pca953x: fix pca953x_irq_bus_sync_unlock regmap lock
gpiolib: tolerate gpio-hogs lacking a hogging state
gpio: sloppy-logic-analyzer: Fix memory leak in gpio_la_poll_probe()
Pull powerpc fixes from Madhavan Srinivasan:
- ensure vpa,slb_shadow & dtl are unregistered during crash
- fix nap return address corruption on async interrupt exit in 970
platform
- fix exit_flags field placement in pt_regs for ptrace
- fix map failure path in dma_ioc0_map_pages() in ps3 platfrom
- MAINTAINERS: Michael Ellerman demotes himself to reviewer
- misc fixes and cleanup
Thanks to Amit Machhiwal, Andreas Schwab, Anushree Mathur, Athira
Rajeev, Christophe Leroy (CS GROUP), Dmitry V. Levin, Geert
Uytterhoeven, John Ogness, Michael Ellerman, Mukesh Kumar Chaurasiya
(IBM), Ritesh Harjani (IBM), Thorsten Blum, and Vaibhav Jain
* tag 'powerpc-7.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
MAINTAINERS: Demote myself to reviewer
powerpc/serial: Fix include guard comment
powerpc/perf: Use strstarts() to simplify is_thread_imc_pmu()
powerpc/ps3: Fix map failure path in dma_ioc0_map_pages()
powerpc/ps3: Remove unused struct table in setup_areas()
powerpc/boot: Fix treeboot-akebono CPU node lookup check
powerpc/boot: Fix treeboot-currituck CPU node lookup check
powerpc/boot: Fix simpleboot CPU node lookup check
powerpc: Fix exit_flags field placement in pt_regs for ptrace
powerpc/970: fix nap return address corruption on async interrupt exit
powerpc/pseries: Skip vpa_init() for boot cpu in smp_setup_cpu()
powerpc/pseries: Ensure vpa,slb_shadow & dtl are unregistered during crash
A TX timeout on a qede NIC that has VXLAN/GENEVE tunnel ports
configured wedges the rtnetlink control plane of the whole machine:
NETDEV WATCHDOG: ens6f1 (qede): transmit queue 2 timed out 10226 ms
[qede_tx_timeout:586(ens6f1)]TX timeout on queue 2!
[qede_recovery_handler:2665(ens6f0)]Starting a recovery process
The recovery path deadlocks on the driver's own mutex:
qede_sp_task
rtnl_lock()
mutex_lock(&edev->qede_lock) <- taken
qede_recovery_handler
qede_load
udp_tunnel_nic_reset_ntf
__udp_tunnel_nic_device_sync
info->sync_table == qede_udp_tunnel_sync
mutex_lock(&edev->qede_lock) <- same task: deadlock
The mutex is not recursive, so the kworker blocks on itself with
rtnl_lock held, and neither lock is ever released. Every task that
calls rtnl_lock() afterwards (ip, ovs-vswitchd, lldpad, IPv6
addrconf, sshd) blocks forever while the node still answers ping.
In a vmcore from an affected production node rtnl_mutex.owner
decodes to the very kworker blocked at the innermost mutex_lock()
above.
Re-sync the tunnel ports from qede_sp_task() after the internal lock
is dropped, still under rtnl_lock as the udp_tunnel API requires.
This mirrors qede_open(), which calls udp_tunnel_nic_reset_ntf()
under rtnl without the internal lock.
qede_recovery_handler() now returns whether it has successfully
reloaded an open device, and the caller re-syncs the ports only in
that case. This keeps the old gating exactly: a device that was down
or a failed recovery returns false, as those paths never reached the
udp_tunnel_nic_reset_ntf() call before either.
This was the only user of the qede_lock()/qede_unlock() helpers, so
remove them.
Fixes: 8cd160a294 ("qede: convert to new udp_tunnel_nic infra")
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Andrew Lunn <andrew+netdev@lunn.ch>
CC: "David S. Miller" <davem@davemloft.net>
CC: Eric Dumazet <edumazet@google.com>
CC: Jakub Kicinski <kuba@kernel.org>
CC: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260726104311.1782900-1-den@openvz.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Marc Kleine-Budde says:
====================
pull-request: can 2026-07-29
this is a pull request of 20 patches for net/main.
The first 2 patches fix problems in the CAN J1939 protocol and are by
Tetsuo Handa and Oleksij Rempel.
The next 2 patches fix problems in the CAN ISOTP protocol and are by
Oliver Hartkopp and Minhong He.
Avi Weiss contributes contributed 4 fixes for the ctucanfd, Pengpeng
Hou's patch adds a missing MODULE_DEVICE_TABLE.
The patches for the peak_usb driver are contributed by James Gao,
Maoyi Xie, Maoyi Xie and add sanity checks for the USB bulk data
parsing and fix a double free.
2 fixes for the kvaser_usb driver are provided by Abdun Nihaal and
Pengpeng Hou, a mem leak is fixed and sanity checks for the USB bulk
data parsing.
Tu Nguyen's patch for the rcar_canfd driver fixes the initializing
flow.
Pengpeng Hou contributes a patch for the softing driver to validate
the firmware record spans.
Lucas Martins Alves's patch for the c_can driver keeps the controller
in init mode until configuration is complete.
A patch by my add missing URB resubmission on skb allocation failure
to the gs_usb driver.
Guangshuo Li's patch for the etas_es58x driver fixes a RX buffer leak.
The last patch is by Pengpeng Hou and adds sanity checks to the USB
bulk data parsing of the ems_usb driver.
linux-can-fixes-for-7.2-20260729
* tag 'linux-can-fixes-for-7.2-20260729' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: ems_usb: validate CPC message lengths
can: etas_es58x: es58x_read_bulk_callback(): fix RX buffer leak on URB resubmit failure
can: gs_usb: gs_usb_receive_bulk_callback(): resubmit URB on skb allocation failure
can: c_can: c_can_chip_config(): keep controller in init mode until bittiming is configured
can: softing: fw_parse(): validate firmware record spans
can: rcar_canfd: change the initializing flow for clocks and resets
can: kvaser_usb_leaf: kvaser_usb_leaf_wait_cmd(): validate received command extents
can: kvaser_usb: kvaser_usb_hydra_get_busparams(): fix memory leak in kvaser_usb_hydra_get_busparams()
can: peak_usb: validate uCAN receive record lengths
can: peak_usb: peak_usb_start(): fix double free of transfer buffer on URB submit error
can: peak_usb: add bounds check for USB channel index
can: ctucanfd: add missing MODULE_DEVICE_TABLE()
can: ctucanfd: use self-test mode for PRESUME_ACK
can: ctucanfd: handle bus error interrupts
can: ctucanfd: mark error-active controller status valid
can: ctucanfd: unmap BAR0 using base address
can: isotp: check register_netdevice_notifier() error in module init
can: isotp: fix timer drain order, wakeup handling and tx_gen ordering
can: j1939: transport: j1939_session_fresh_new(): initialize receive buffer
can: j1939: use netdevice_tracker for j1939_{priv,session,ecu} tracking
====================
Link: https://patch.msgid.link/20260729102802.505168-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
nxp_fspi_select_mem() disables the FlexSPI clocks before calling
clk_set_rate() and re-enabling them. If clk_set_rate() or the clock
re-enable fails, the function returned early (as void) leaving both the
serial root clock and the register interface clock disabled.
As the function returned void, nxp_fspi_exec_op() had no way to know
about the failure and continued to access FlexSPI registers (LUT setup,
data transfer, AHB buffer invalidation). Accessing the controller
registers while its clock is gated off results in a synchronous external
abort.
Make nxp_fspi_select_mem() return an error code and have
nxp_fspi_exec_op() bail out on failure before any further register
access, including nxp_fspi_invalid().
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://patch.msgid.link/20260728-fspi-clock-v2-3-dbe786a4a6eb@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In nxp_fspi_select_mem() the RX sample clock source (MCR0[RXCLKSRC])
and the DLL control registers (DLLxCR) are reconfigured while the
FlexSPI module is still enabled. According to the FlexSPI reference
manual initialization sequence, MCR0 and the DLL control registers
should be programmed while the module is in stop mode, i.e. with
MCR0[MDIS] set to 1, and the module re-enabled (MCR0[MDIS] = 0)
afterwards.
Wrap the RX sample clock source selection and the DLL calibration/
override reconfiguration in a stop-mode window to align with the RM
and avoid reconfiguring timing-critical registers while the module is
active.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260728-fspi-clock-v2-2-dbe786a4a6eb@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit f43579ef35 ("spi: spi-nxp-fspi: limit the clock rate for
different sample clock source selection") introduced a global 166MHz
cap for DTR mode (RXCLKSRC=3), based on the i.MX8MN datasheet timing
specification (Section 3.9.9, page 65).
After reviewing the FlexSPI timing parameters in the datasheets for all
supported SoCs, the following corrections and additions are needed:
1. SDR mode (RXCLKSRC=0) limits vary per SoC:
- i.MX8MN/MM/MP/95: 66MHz (IMX8MNCEC §3.9.9, IMX8MMCEC §3.9.10,
IMX8MPCEC, IMX95CEC Rev.8 §4.11.7)
- i.MX8QXP/QM/DXL/ULP: 60MHz (IMX8QXPCEC, IMX8QMCEC, IMX8DXLCEC,
IMX8ULPCEC §7.3.1 ND mode)
- LX2160A: 100MHz (LX2160ACEC FlexSPI timing parameters)
2. DTR mode (RXCLKSRC=3) limits vary per SoC:
- i.MX8MN/MM/MP/ULP: 166MHz
- i.MX8QXP/QM/DXL: 200MHz (same FlexSPI IP across this family)
- i.MX95: 200MHz (IMX95CEC §4.11.7.3.2.3 Table 106)
- LX2160A: DTR disabled (FSPI_QUIRK_DISABLE_DTR)
Update related platform data with correct speed limation according
to datasheet.
Fixes: f43579ef35 ("spi: spi-nxp-fspi: limit the clock rate for different sample clock source selection")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://patch.msgid.link/20260728-fspi-clock-v2-1-dbe786a4a6eb@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: Fixes for v7.2
This is a relatively large set of updates, the biggest batch of things
is Charles' fixes for the SDCA code which have been through a number of
iterations on the list and deal with a bunch of issues that have been
seen as we get more real world usage of SDCA. We also have the usual
device specific fix and quirk traffic that we tend to see, there's a
small pile of fixes for the tas2562 driver since I saw some bugs while
reviewing fixes sent by Haidar Lee but it's nothing too remarkable.
While attaching a newly created meter attach_meter() function makes
the new meter visible to other CPUs but can still fail afterwards.
On failure, it detaches the meter back and returns an error.
However, this is an unexpected behavior for the ovs_meter_cmd_set()
that uses a plain kfree(meter) on attach failure without waiting for
RCU readers to stop using it, assuming it was never visible.
This is never a problem for ovs-vswitchd as it always creates meters
before creating any flows that use them. But the UAF can be triggered
with a custom application using uAPI:
BUG: KASAN: slab-use-after-free in ovs_meter_execute (net/openvswitch/meter.c:653)
Read of size 8 at addr ffff88810d152650 by task meter/2508
Call Trace:
ovs_meter_execute (net/openvswitch/meter.c:653)
do_execute_actions (net/openvswitch/actions.c:1407)
ovs_execute_actions (net/openvswitch/actions.c:1584)
ovs_packet_cmd_execute (net/openvswitch/datapath.c:703)
...
netlink_sendmsg (af_netlink.c:1900)
Allocated by task 2519:
__kasan_kmalloc (mm/kasan/common.c:398 mm/kasan/common.c:415)
ovs_meter_cmd_set (net/openvswitch/meter.c:422)
...
netlink_sendmsg (af_netlink.c:1900)
Freed by task 2519:
kfree (mm/slub.c:2705 mm/slub.c:6405 mm/slub.c:6720)
ovs_meter_cmd_set (net/openvswitch/meter.c:479)
...
netlink_sendmsg (af_netlink.c:1900)
Fix that by making sure attach_meter() doesn't make the meter visible
until all the checks are done and the function can't fail anymore.
This also makes sure the "hash" value is calculated after the potential
re-sizing of the table.
Reported by Trend Micro's Zero Day Initiative as ZDI-CAN-31642.
Fixes: c7c4c44c9a ("net: openvswitch: expand the meters supported number")
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://patch.msgid.link/20260727121022.198461-1-i.maximets@ovn.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 14a8570564 ("sched/deadline: Use revised wakeup rule for
dl_server") applies the revised wakeup rule to any server, as a result
servers that are not running (dl_defer_running == 0) and start with a
deadline overflow get enqueued and can boost tasks as if they were
running, invalidating the defer rule and the documented state model.
Apply the revised wakeup rule only for deferrable servers that are
marked as running.
Fixes: 14a8570564 ("sched/deadline: Use revised wakeup rule for dl_server")
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Tested-by: Andrea Righi <arighi@nvidia.com>
Link: https://patch.msgid.link/20260522125833.264145-1-gmonaco@redhat.com
When TX VLAN hardware offload is disabled, VLAN tags are embedded in
the packet payload (software VLAN). Previously, the driver failed to
set the WX_TX_FLAGS_SW_VLAN flag for these packets during transmission.
This missing flag caused the txgbe FDIR ATR logic to fall through to the
default hash calculation path. This resulted in asymmetric hash values
for Tx and Rx flows, preventing return packets from being steered to the
same queue as the transmit packets.
Fix this by detecting software VLANs via eth_type_vlan(skb->protocol)
and setting WX_TX_FLAGS_SW_VLAN. This ensures the ATR feature selects
the correct hashing algorithm to maintain Tx/Rx queue symmetry.
Fixes: b501d261a5 ("net: txgbe: add FDIR ATR support")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/0879DA38A8E32701+20260724074657.10773-1-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Luiz Angelo Daros de Luca says:
====================
net: dsa: realtek: use devm_mutex_init
This series fixes mutex teardown in the Realtek DSA drivers.
With CONFIG_DEBUG_MUTEXES enabled, mutex_destroy() must be called before
the mutex is discarded. Using devm_mutex_init() lets the driver core
handle that automatically.
The changes are split into individual commits based on the feature that
introduced each lock to allow proper backports to stable trees.
====================
Link: https://patch.msgid.link/20260726-realtek_mutext-v2-0-5d62ba998791@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In netc_timer_remove(), hardware interrupts are disabled by clearing
TMR_TEMASK before ptp_clock_unregister() is called. This may cause a
race condition during driver unbind that could leave hardware interrupts
active. For example, a concurrent PTP_CLK_REQ_EXTTS ioctl can re-enable
TMR_TEMASK after it has been cleared, leaving a pending hardware
interrupt when the driver unbinds.
Since the NETC Timer does not support PCIe FLR, hardware state is not
reset during probe. When the driver is rebound and the IRQ is registered,
the pending interrupt fires immediately. At that point priv->tmr_emask
is still zero, so netc_timer_isr() does not clear the interrupt status
and unconditionally returns IRQ_HANDLED, resulting in an uninterruptible
infinite interrupt storm.
Fix this in several ways. First, request the IRQ with IRQF_NO_AUTOEN so
it is not enabled when request_irq() runs, and clear TMR_TEMASK in
netc_timer_init() before enabling it. The IRQ is only enabled at the end
of probe once the timer has been reprogrammed and the PTP clock has been
registered. This ensures a stale pending interrupt from a previous unbind
or an unclean shutdown cannot be delivered before the driver is fully
initialized.
Second, in netc_timer_remove() call disable_irq() before
ptp_clock_unregister() and move the TMR_TEMASK/TMR_CTRL clearing after
it. disable_irq() masks the line and waits for any in-flight
netc_timer_isr() to finish, so no ISR can dereference priv->clock after
ptp_clock_unregister() has freed it. Unregistering the PTP clock before
clearing the mask also guarantees that no in-flight or concurrent ioctl
can re-enable hardware interrupts.
Finally, return IRQ_NONE from netc_timer_isr() when the masked event
status is zero, so the kernel's spurious interrupt detection can disable
a stuck line instead of looping forever.
Fixes: 671e266835 ("ptp: netc: add periodic pulse output support")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260720012508.23227-1-wei.fang%40oss.nxp.com
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260727060348.1887464-1-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mana_create_rxq() returns a struct mana_rxq pointer and returns NULL on
any failure. The caller, mana_add_rx_queues(), cannot tell what went
wrong and hardcodes the error as -ENOMEM. As a result the actual failure
reported by the lower layers (for example -EPROTO from a failed HW
request) is masked and every RX queue creation failure looks like an
out-of-memory error.
Return an ERR_PTR() encoded error code from mana_create_rxq() on failure
instead of NULL. The caller now propagates the returned error code
directly instead of substituting -ENOMEM.
Fixes: ca9c54d2d6 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Aditya Garg <gargaditya@linux.microsoft.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260727113759.2881500-1-gargaditya@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ilya Maximets says:
====================
net: openvswitch: fix skb leak on flow key update failure
Fixes for two issues reported by Sashiko while reviewing other patches.
The root cause is the same, fixes and the Fixes are slightly different,
so two separate patches.
====================
Link: https://patch.msgid.link/20260727181851.306076-1-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ovs_ct_execute() always steals or frees the skb on failure while
ovs_flow_key_update() does not. So, if it fails and we return right
away, the skb ends up leaked.
Fix that by breaking instead and letting the common error handling
code at the bottom of the loop to free the skb properly.
This is a very unlikely scenario as it requires the packet to become
unparseable by applying a set of actions on a previously parseable skb,
but should be fixed nevertheless.
Reported by Sashiko.
Fixes: ec0d043d05 ("openvswitch: Ensure flow is valid before executing ct")
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260727181851.306076-3-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
do_execute_actions() returns right away when execute_recirc() fails on
the last action as it assumes this function always takes ownership of
the skb when 'last' is true. But when the flow key update fails, the
function doesn't free the skb and it ends up leaked.
This is a very unlikely scenario as it requires the packet to become
unparseable by applying a set of actions on a previously parseable skb,
but should be fixed nevertheless.
Reported by Sashiko.
Fixes: 971427f353 ("openvswitch: Add recirc and hash action.")
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20260727181851.306076-2-i.maximets@ovn.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For E2E delay mechanism, "received DELAY_REQ without timestamp" error
messages show up for dwmac v3.70+ and dwxgmac IPs.
This issue affects socfpga platforms, Agilex7 (dwmac 3.70) and
Agilex5 (dwxgmac). According to the databook, to enable timestamping
for all events, the SNAPTYPSEL bits in the MAC_Timestamp_Control
register must be set to 2'b01, and the TSEVNTENA bit must be cleared
to 0'b0.
Commit 3cb958027c ("net: stmmac: Fix E2E delay mechanism") already
addresses this problem for all dwmacs above version v4.10. However,
same holds true for v3.70 and above, as well as for dwxgmac. Updates
the check accordingly.
Fixes: 14f347334b ("net: stmmac: Correctly take timestamp for PTPv2")
Fixes: f2fb6b6275 ("net: stmmac: enable timestamp snapshot for required PTP packets in dwmac v5.10a")
Fixes: 3cb958027c ("net: stmmac: Fix E2E delay mechanism")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Signed-off-by: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
Link: https://patch.msgid.link/20260728060904.31993-1-muhammad.nazim.amirul.nazle.asmade@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Golle says:
====================
net: dsa: mt7530: fix swallowed MDIO read errors
While working on a register access cleanup for the mt7530 driver, the
Sashiko AI reviewers flagged long-standing error handling gaps in the
driver's read paths [1].
The MDIO regmap backend truncates negative bus->read() errnos into u16
register halves and returns success, handing garbage data to callers
and to read-modify-write cycles which then write it back to the switch.
The ATC/VTCR command polls and the MT7531 indirect PHY polls consume
reads through a helper which returns 0 when the underlying read fails.
A failed bus transaction thus clears the polled busy bit and is
mistaken for command completion, defeats the subsequent
ATC_INVALID/VTCR_INVALID checks the same way, and lets the indirect
PHY access functions return garbage PHY register data.
Fix the backend to propagate bus->read() errors, and convert the
command and PHY access polls to regmap_read_poll_timeout(), which
terminates polling on read errors and propagates them.
The cleanup series depending on these fixes will be submitted to
net-next separately after the next net/net-next merger.
[1] https://lore.kernel.org/netdev/cover.1784481922.git.daniel@makrotopia.org/
====================
Link: https://patch.msgid.link/cover.1785213071.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MT7531 indirect PHY access functions poll MT7531_PHY_IAC through
a helper which returns 0 when the underlying read fails, so a failed
bus transaction clears MT7531_PHY_ACS_ST and the access carries on,
returning garbage PHY register data to phylib.
Poll using regmap_read_poll_timeout(), which stops on read errors and
propagates them. These functions hold the MDIO bus lock across the
whole sequence, so the unlocked regmap accesses remain correct. Remove
the now-unused _mt7530_unlocked_read().
Fixes: c288575f78 ("net: dsa: mt7530: Add the support of MT7531 switch")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/79e85d68d210cc37342978171aa6432aa2954333.1785213071.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mt7530_fdb_cmd() and mt7530_vlan_cmd() poll the command register
through a helper which returns 0 when the underlying read fails. A
failed bus transaction thus clears ATC_BUSY/VTCR_BUSY and is treated
as successful command completion, and the subsequent ATC_INVALID and
VTCR_INVALID checks are defeated the same way.
Poll using regmap_read_poll_timeout(), which stops on read errors and
propagates them, and check the completion status read as well. Take
the MDIO bus lock across the sequence as the switch regmap is set up
with locking disabled.
Fixes: b8f126a8d5 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Fixes: 83163f7dca ("net: dsa: mediatek: add VLAN support for MT7530")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/eea1d8f15c54375b3770c23e09fb3217df487169.1785213071.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bus->read() returns a negative errno on failure, but
mt7530_regmap_read() assigns it to a u16, truncating e.g. -ETIMEDOUT
into 0xff92, and returns success. The garbage word is then consumed as
register data, and read-modify-write cycles write it back to the
switch. Check both reads and propagate their errors.
The same defect existed in mt7530_mii_read() since the driver was
introduced and moved into the regmap backend unchanged.
Fixes: b8f126a8d5 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/3c628e48276c2e5522c8795a6be60d11c7a76a7d.1785213071.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2026-07-28 (idpf, ice, igc, igbvf, e1000)
Michael Bommarito adds bounds checking to ensure interrupt vector array
stays in-bounds on idpf.
Josh adjusts minimum value for Tx ring descriptors to prevent Tx
timeouts in flow based scheduling mode in idpf.
Yuho Choi frees IRQ name in error path to prevent memory leak for idpf.
Aaron Ma adds a wait for reset completion before returning from resume
on ice driver.
Dawid completely disables and clears VF interrupts during reset on ice.
Dawei Feng adjusts error path for ice loopback test setup and e1000 probe
to prevent memory leaks.
Przemek ignores, expected, -EBUSY errors that can occur during reset
and cause disabling of DPLL on ice.
David Carlier removes napi_synchronize() during igc_down for igc.
Matt Vollrath removes incorrect decrement of count which could cause
leaking due to off-by-one issue.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000: fix memory leak in e1000_probe()
igbvf: Fix leak in TX DMA error cleanup
igc: remove napi_synchronize() in igc_down()
ice: suppress DPLL errors during reset recovery
ice: fix memory leak in ice_lbtest_prepare_rings()
ice: fix VF interrupts cleanup
ice: wait for reset completion in ice_resume()
idpf: Fix mailbox IRQ name leak on request failure
idpf: adjust TxQ ring count minimum
idpf: bound interrupt-vector register fill to the allocated array
====================
Link: https://patch.msgid.link/20260728210909.3042004-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon Schippers says:
====================
Revert "tun/tap & vhost-net: apply qdisc backpressure on full ptr_ring to reduce TX drops"
Commit 1d6e569b7d ("tun/tap & vhost-net: avoid ptr_ring tail-drop when
a qdisc is present") did not show a relevant performance regression in my
testing, but on Brett Sheffield's librecast testbed it causes a
significant throughput drop in an IPv6 multicast testcase. The regression
can be pinpointed to multiple iperf3 TCP threads sending: for 8 threads
the throughput dropped from 13.5 Gbit/s to 9.13 Gbit/s.
Therefore this series reverts the qdisc backpressure work.
Making the backpressure opt-in via a new IFF_BACKPRESSURE flag was
proposed in [1], but a new IFF_* flag needs more review scrutiny than is
available at the moment, so a revert was requested instead. The opt-in
will be resubmitted for net-next later.
[1] Link: https://lore.kernel.org/netdev/20260709095511.168235-1-simon.schippers@tu-dortmund.de/
Reported-by: Brett Sheffield <brett@librecast.net>
Closes: https://lore.kernel.org/netdev/akVnoOYQOrt8k-Gu@karahi.librecast.net/
====================
Link: https://patch.msgid.link/20260728092240.250257-1-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Johannes Berg says:
====================
Much quieter, thankfully:
- a set of ath12k fixes, including a recent
MLO regression for WCN7850/QCC2072
- iwlegacy gets rid of a BUG_ON that triggered
- a couple more robustness/security fixes
* tag 'wireless-2026-07-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlegacy: replace BUG_ON() with WARN_ON() on num_stations check
wifi: mac80211: validate individual TWT params before driver setup
wifi: cfg80211: publish PMSR request before starting the driver
wifi: mwifiex: use the subframe length when parsing A-MSDU TDLS frames
wifi: cfg80211: validate IEs in cfg80211_wext_siwgenie()
wifi: mac80211: fix tid_tx use-after-free on BA session stop
wifi: ath12k: resolve PENDING ML peer ID from MLO_PEER_MAP HTT event
wifi: ath12k: defer dp_peer registration when firmware allocates MLD peer ID
wifi: ath12k: do not advertise MLD peer ID for firmware-allocate devices
wifi: ath12k: introduce host_alloc_ml_id hardware parameter
wifi: ath12k: add support for HTT_T2H_MSG_TYPE_MLO_RX_PEER_MAP
wifi: ath12k: keep ATH12K_PEER_ML_ID_VALID set in ath12k_sta::ml_peer_id
wifi: ath12k: factor out peer assoc send-and-wait into a helper
wifi: ath12k: fix out-of-bounds clear_bit in ath12k_mac_dp_peer_cleanup()
====================
Link: https://patch.msgid.link/20260729071954.45655-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull probes fixes from Masami Hiramatsu:
- Reject $arg0 during meta-argument expansion to prevent negative index
calculation and out-of-bounds reading of traceprobe parameters
- Roll back on enable_trace_fprobe() failure
Add a rollback cleanup path when __register_trace_fprobe() fails
partway through to unregister registered probes and clear flags or
file links
- Fix module reference count leak on error in register_fprobe()
Ensure the module_put() cleanup loop still runs even when
get_ips_from_filter() returns an error, preventing module
reference count leaks
* tag 'probes-fixes-v7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fprobe: Fix module reference count leak on error in register_fprobe()
tracing/fprobe: Roll back on enable_trace_fprobe() failure
tracing/probes: Reject $arg0 in meta argument expansion
The Adaptation Layer Indication parameter contains a fixed 32-bit
Adaptation Code Point after its parameter header. However,
sctp_verify_param() accepts a header-only parameter because the generic
parameter walker only requires the header to be present.
sctp_process_param() then reads adaptation_ind beyond the declared
parameter. When the malformed parameter is last in an INIT, the read
starts at the receive skb tail, and the value is copied into the state
cookie returned in the INIT ACK. This may disclose four receive-buffer
tail bytes.
Require the declared parameter length to match the fixed structure size
and abort the association through the existing invalid parameter length
path otherwise.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Charles Vosburgh <trilobyte777@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20260727-sctp-adaptation-length-v1-1-0ab58b2810a5@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I have changed jobs and therefore no longer have access to hardware
using Realtek Ethernet switches. Luiz has kindly agreed to take up the
role of maintainer, while I will stick around as a reviewer.
Also update .mailmap so that mails to my old company email stop
bouncing. Use my new work email for Analog Devices Inc. instead.
Signed-off-by: Alvin Šipraga <alvin.sipraga@analog.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Acked-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://patch.msgid.link/20260727-realtek-maintainers-v1-1-ab501adc0cdb@analog.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When adding a source-specific route creates a new subtree, fib6_add()
installs fib6_null_entry as the temporary leaf of the new subtree root
and takes a fib6_info reference for that holder.
If adding the first source leaf fails, the code frees the just allocated
subtree root but leaves that hold behind. fib6_null_entry is a per-netns
sentinel and is freed directly at netns teardown, so this does not keep
the object alive. However, it leaves its visible refcount permanently
elevated and can eventually saturate the refcount on repeated failures.
Drop the null-entry reference before freeing the unlinked subtree root.
Fixes: 5ea715289a ("ipv6: broadly use fib6_info_hold() helper")
Signed-off-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://patch.msgid.link/20260727185339.1545169-1-shuangpeng.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The race occurs between network namespace removal and PSP device
unregistration. When a netns is deleted while a PSP device associated
with that netns is concurrently being removed, psp_dev_unregister()
triggers psp_nl_notify_dev() to send a device change notification.
Concurrently, cleanup_net() running in the netns workqueue calls
genl_pernet_exit(), which sets net->genl_sock to NULL. If
genl_pernet_exit() wins the race, two sites in psp_nl_multicast_per_ns()
then dereference the NULL socket and crash:
CPU 0 (netns teardown) CPU 1 (PSP device unregister)
====================== =============================
cleanup_net [workqueue]
genl_pernet_exit() psp_dev_unregister()
net->genl_sock = NULL psp_nl_notify_dev()
psp_nl_multicast_per_ns()
build_ntf()
-> netlink_has_listeners(NULL)
/* crash */
genlmsg_multicast_netns()
-> nlmsg_multicast_filtered(NULL)
/* crash */
Fix by replacing the bare dev_net() calls with maybe_get_net().
maybe_get_net() returns NULL if the namespace is already dying.
Holding the reference ensures genl_sock remains valid across both the
build_ntf() and genlmsg_multicast_netns() calls.
Fixes: 00c94ca2b9 ("psp: base PSP device support")
Fixes: 06c2dce2d0 ("psp: add new netlink cmd for dev-assoc and dev-disassoc")
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Akhilesh Samineni <akhilesh.samineni@broadcom.com>
Signed-off-by: Kiran Kella <kiran.kella@broadcom.com>
Link: https://patch.msgid.link/20260727101628.502042-1-kiran.kella@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dibs_lo_attach_dmb(), dibs_lo_detach_dmb() and dibs_lo_unregister_dmb()
look up the dmb_node under dmb_ht_lock, drop the lock and only then
operate on the node's refcount. Nothing keeps the node alive across
that window: __dibs_lo_unregister_dmb() removes the node from the hash
table under the write lock and immediately frees it.
A concurrent final put can therefore free the node between the lookup
and the refcount operation:
CPU0 (attach) CPU1 (owner unregisters)
read_lock_bh(&dmb_ht_lock)
find dmb_node (refcnt == 1)
read_unlock_bh(&dmb_ht_lock)
refcount_dec_and_test() 1 -> 0
write_lock_bh(&dmb_ht_lock)
hash_del(&dmb_node->list)
write_unlock_bh(&dmb_ht_lock)
kfree(dmb_node)
refcount_inc_not_zero(&dmb_node->refcnt) <-- use-after-free
The same window exists for the refcount_dec_and_test() calls in the
detach and unregister paths.
Close the race structurally by making hash table membership and the
refcount transitions atomic with respect to each other:
- Perform the final refcount_dec_and_test() and hash_del() in a single
dmb_ht_lock write-side critical section, in both the unregister and
the detach path. Freeing the node still happens after the lock is
dropped, which is safe because a node whose refcount reached zero has
left the hash table and can no longer be found.
- This establishes the invariant that any node found in the hash table
holds at least one reference, and that the final reference can only
be dropped under the write lock. dibs_lo_attach_dmb() can thus take
its reference with a plain refcount_inc() while still holding the
read lock; refcount_inc_not_zero() is no longer needed.
__dibs_lo_unregister_dmb() no longer touches the hash table and is
renamed to dibs_lo_free_dmb() accordingly.
Note: commit cc21191b58 ("dibs: Move data path to dibs layer") moved
the code to its current location; the race was introduced earlier by
commit c3a910f238 ("net/smc: implement DMB-merged operations of
loopback-ism").
Tested SMC-D via ISM and dibs loopback.
Cc: stable@vger.kernel.org
Fixes: c3a910f238 ("net/smc: implement DMB-merged operations of loopback-ism")
Reported-by: Rahul Chandelkar <rc@rexion.ai>
Signed-off-by: Hidayath Khan <hidayath@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://patch.msgid.link/20260727093530.968834-1-hidayath@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
remove_pud_mapping() and remove_p4d_mapping() obtain a child table base
with pud_offset(p4dp, 0) and p4d_offset(pgd, 0), then add the index for
addr.
RISC-V folds page-table levels at runtime. When a level is folded, its
offset helper returns the parent entry itself, but the index can still be
nonzero. Adding it walks past the parent table. Sv48 folds P4D, while Sv39
folds both P4D and PUD, so memory hot-remove can descend into unrelated
memory and pass an invalid page to __free_pages(). This can trigger:
kernel BUG at include/linux/mm.h:1810!
VM_BUG_ON_PAGE(page_ref_count(page) == 0)
arch_remove_memory+0x1e/0x5c
try_remove_memory+0x15e/0x200
remove_memory+0x24/0x3c
Only add the index when the corresponding page-table level is enabled,
matching p4d_offset() and pud_offset().
Fixes: c75a74f4ba ("riscv: mm: Add memory hotplugging support")
Assisted-by: Claude:claude-fable-5
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Link: https://patch.msgid.link/20260729012132.24882-1-kmehltretter@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
After switching to the kernel's default package scripts for our local
kernel RPM builds, we noticed that module BTF entries were missing:
$ ls /sys/kernel/btf/
vmlinux <<<< only vmlinux, no module BTF
Root cause: find-debuginfo.sh (from the debugedit package) prefers
eu-strip over strip when elfutils is installed, which is the common
case on RHEL 9. eu-strip removes non-allocated ELF sections, including
the .BTF section that contains BPF Type Format information for kernel
modules. Without .BTF, BPF tools (bpftool, bcc, bpftrace) cannot resolve
kernel types at runtime, and /sys/kernel/btf/<module> entries are not
created when modules are loaded.
Additionally, since commit 8646db2389 ("libbpf,bpf: Share BTF
relocate-related code with kernel"), modules contain a .BTF.base section
that maps distilled type IDs to vmlinux types. If .BTF.base is stripped,
btf_parse_module() falls back to vmlinux BTF directly, causing type ID
mismatches and rejecting the module's BTF entirely.
Fix by passing --keep-section .BTF and --keep-section .BTF.base via
_find_debuginfo_opts, which adds -K .BTF and -K .BTF.base to the
eu-strip/strip command, preserving both sections while allowing normal
debuginfo extraction to proceed.
After this change, all module BTF files are properly generated:
$ ls /sys/kernel/btf/
aesni_intel drm i2c_i801 mfd_core
ahci drm_client_lib i2c_mux net_failover
backlight drm_kms_helper i2c_smbus pcspkr
ccp drm_shmem_helper input_leds qemu_fw_cfg
dm_log failover intel_rapl_common sch_fq_codel
dm_mirror fat intel_rapl_msr serio_raw
dm_mod fuse irqbypass sunrpc
dm_region_hash gf128mul iTCO_wdt vfat
virtio_balloon virtio_console virtio_dma_buf virtio_gpu
virtio_net virtio_rng virtio_blk vmlinux
xfs
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Alan Maguire <alan.maguire@oracle.com>
Link: https://patch.msgid.link/20260728024950.44946-1-laoar.shao@gmail.com
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
[Why]
We need to exit PSR/IPS before programming. Before calling DC for
programming in amdgpu_dm_commit_planes(), there's a
vblank_control_workqueue flush. This waits for IPS and PSR exit. (See
drm_vblank_on/off() > amdgpu_dm_crtc_set_vblank() --queue_work()->
amdgpu_dm_crtc_vblank_control_worker())
Prior to the tagged "Fixes:" change, drm_vblank_get() was called before
the workqueue flush. This ordering ensures that PSR exit occurred before
programming. After the "Fixes:" change, drm_vblank_get() is called after
the workqueue flush, leading to programming while idle optimizations are
still active. This can lead to incorrect flip_pending detection used by
vblank event delivery.
[How]
Split the vblank_get() component of `dm_arm_vblank_event()` into
`dm_arm_vblank_event_pre_programming()`, which is called before
programming. Call it before the vblank_control_workqueue flush.
Includes a drive-by cleanup of prepare_flip_isr(): the only caller is
dm_arm_vblank_event() and it's simple enough to roll-in.
v2: Fix checkpatch formatting warning on
drm_arm_vblank_event_pre_programming() arg alignment.
Fixes: 48ab86360a ("drm/amd/display: check GRPH_FLIP status before sending event")
Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/4141#note_3583205
Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/5527
Assisted-by: Codex:gpt-5.6-sol
Assisted-by: Claude:opus-5
Suggested-by: David Weber <weber.aulendorf@gmail.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 05984e2952)
APUs use firmware-owned DPM tables and do not support replacement through
pp_table. Generic callbacks can nevertheless expose the sysfs file and
accept an upload before resetting the power management stack.
Treat pp_table as unsupported on APUs. Use the same platform check in the
get and set paths to hide the file and reject uploads.
Fixes: 289921b03f ("drm/amd/powerplay: implement sysfs of pp_table for smu11 (v2)")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 74f28db2db)
Cc: stable@vger.kernel.org
Pull kvm fixes from Paolo Bonzini:
"arm64:
- Fix a tiny buglet when propagating the deactivation of an interrupt
from a nested guest, which happened to trigger a gold plated CPU
bug on a particular implementation
- Fix a race between LPI unmapping and mapping, resulting in leaked
LPIs
- Make LPI mapping more robust on memory allocation failure
- Fix the handling of the EL2 tracing clock being disabled
- A couple of Sashiko-driven fixes for corner cases in the EL2
tracing code
- Add missing sysreg tracepoint for the EL2 code
- Tidy-up the mutual exclusion of guest-memfd and MTE
- Update Fuad's email address to point to @linux.dev
s390:
- several fixes for PCI passthru in s390 kvm
- fix a 7.2-rc regression in the adapter interrupt mapping code
x86:
- Add memory clobber to asm for VMX instructions; without one, the
compiler could reorder them in troublesome ways because "asm
volatile" and "asm goto" only protect against removal of the asm.
- Cancel delayed I/O APIC EOI handling before destroying vCPUs
- Check all address spaces (normal and SMM) for write tracking and large
pages, not just the current one.
- Always update x2APIC MSR intercepts for L1 when AVIC is deactivated,
even if not running L1. If the deactivation is VM-wide rather than being
caused by something in L2's vCPU state, after a nested vmexit L1 will
be able to access the host's APIC state"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: SVM: Update x2APIC MSR intercepts if AVIC is inhibited while L2 is active
KVM: x86/mmu: Check all address spaces before skipping unsync
KVM: x86/mmu: Check write tracking in all address spaces
KVM: x86: Cancel delayed I/O APIC EOI handling before destroying vCPUs
KVM: VMX: add memory clobber to asm for VMX instructions
KVM: s390: Fall back to short-term pinning in MAP ioctl
KVM: s390: pci: Validate AIBV and AISB before pinning guest pages
KVM: s390: pci: Fix resource leak on IRQ registration failure
KVM: s390: pci: Fix NULL dereference on AIBV allocation failure
KVM: s390: pci: Fix missing error codes and memory unaccounting
KVM: s390: pci: Fix memory accounting for pinned/unpinned pages
KVM: s390: pci: Reject adapter interrupt forwarding if already enabled
KVM: arm64: Reject guest_memfd memslots when the VM has MTE
KVM: arm64: Add missing hyp_enter when trapping sysreg
KVM: arm64: Fix hyp_trace_desc allocation size in hyp_trace_load()
KVM: arm64: Fix potential leak in hyp_trace_buffer_alloc_bpages_backing
KVM: arm64: Fix hyp_trace clock disabling
KVM: arm64: vgic: Mitigate potential LPI registration failure
KVM: arm64: vgic: Fix race between LPI release and re-registration
KVM: arm64: Update Fuad Tabba's email address
...
Always update x2APIC MSR intercepts for L1 when AVIC is deactivated, even
if L2 is active and KVM is using a separate MSR bitmap to run L2. If AVIC
is fully enabled prior to running L2, and is then inhibited while L2 is
active (for a VM-scoped inhibit), then KVM will run L1 with AVIC disabled,
but with x2APIC MSR intercepts disabled, i.e. will allow L1 to read most of
the host's APIC state, send arbitrary interrupts, change task priority, and
ultimately trivially DoS the host.
E.g. sending a self-IPI in L1 on HYPERV_REENLIGHTENMENT_VECTOR, 0xee, with
CONFIG_HYPERV=n in the host kernel as a "safe" PoC, yields:
Spurious interrupt (vector 0xee) on CPU#425. Acked
And hacking KVM to abuse kvm_set_posted_intr_wakeup_handler() to register a
handler and WARN on POSTED_INTR_WAKEUP_VECTOR yields:
------------[ cut here ]------------
WARNING: arch/x86/kvm/svm/svm.c:5594 at pi_wakeup_handler+0x9/0x10 [kvm_amd], CPU#156: nested_x2apic_t/316940
CPU: 156 UID: 0 PID: 316940 Comm: nested_x2apic_t Tainted: G S U
Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
Hardware name: Google Astoria-Turin/astoria, BIOS 0.20260209.0-0 02/09/2026
RIP: 0010:pi_wakeup_handler+0x9/0x10 [kvm_amd]
Call Trace:
<IRQ>
sysvec_kvm_posted_intr_wakeup_ipi+0x64/0x80
</IRQ>
<TASK>
asm_sysvec_kvm_posted_intr_wakeup_ipi+0x1a/0x20
RIP: 0010:vcpu_run+0x1430/0x1e40 [kvm]
kvm_arch_vcpu_ioctl_run+0x2c1/0x600 [kvm]
kvm_vcpu_ioctl+0x580/0x6b0 [kvm]
__se_sys_ioctl+0x6d/0xb0
do_syscall_64+0x10a/0x480
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x46ff4b
</TASK>
---[ end trace 0000000000000000 ]---
Fixes: 091abbf578 ("KVM: x86: nSVM: optimize svm_set_x2apic_msr_interception")
Cc: stable@vger.kernel.org
Cc: Yosry Ahmed <yosry@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://patch.msgid.link/20260729213558.639074-1-pbonzini@redhat.com/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In encode_message() the per-transaction lower-bound check compares
trans_hdr->len against sizeof(trans_hdr), i.e. the size of the pointer,
instead of sizeof(*trans_hdr), the size of struct qaic_manage_trans_hdr.
Every other length check in this file (encode_message() at the loop
guard, decode_message(), etc.) correctly uses sizeof(*trans_hdr), so
this is an inconsistency. On 64-bit builds the pointer and the struct
are both 8 bytes, so the check is correct by coincidence and there is
no behavioural change. On 32-bit builds the pointer is 4 bytes, which
weakens the minimum-length check below the 8-byte header size.
Use sizeof(*trans_hdr) so the check validates against the actual
transaction header size on all builds.
Fixes: ea33cb6fc2 ("accel/qaic: tighten bounds checking in encode_message()")
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20260617212520.59801-1-meatuni001@gmail.com
`audit_del_rule()` destroys `e->rule.exe` via `audit_remove_mark_rule()`
before unlinking the rule from RCU-visible filter lists and waiting for a
grace period. Concurrent readers in `audit_filter()` and
`audit_filter_rules()` still dereference `e->rule.exe`, while the fsnotify
mark can be freed on an independent lifetime path. This creates a
use-after-free window during rule deletion.
Fix this by unlinking the rule from the RCU-visible lists and invoking
`synchronize_rcu()` before calling `audit_remove_mark_rule()` (and other
rule removal helpers). This ensures that all existing RCU readers have
exited the critical section before any underlying resources are destroyed.
Cc: stable@vger.kernel.org
Fixes: 34d99af52a ("audit: implement audit by executable")
Reported-by: Vega <vega@nebusec.ai>
Assisted-by: Codex:gpt-5.4
Signed-off-by: Luxiao Xu <rakukuip@gmail.com>
Signed-off-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
audit_log_n_string() computes new_len as "slen + 3" (enclosing quotes
plus the NUL terminator) and stores it into an int, while slen is a
size_t. For a sufficiently large slen the addition can overflow and/or
the result be truncated when assigned to the int new_len, so the
"new_len > avail" check can be bypassed and the subsequent
memcpy(ptr, string, slen) can write past the skb tail.
This is the same class of bug that was fixed for the hex sibling in
commit 65dfde57d1 ("audit: fix potential integer overflow in
audit_log_n_hex()"); both helpers are reached through
audit_log_n_untrustedstring() with the same length source.
Make new_len a size_t and use check_add_overflow() to catch the
overflow, mirroring the audit_log_n_hex() fix. No functional change for
the in-tree callers, which all pass bounded lengths.
Cc: stable@vger.kernel.org
Fixes: 168b717395 ("AUDIT: Clean up logging of untrusted strings")
Signed-off-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
regex_match_full() calls strncmp(str, r->pattern, len) where len is the
target field buffer size. When len is smaller than r->len (the filter
pattern length), strncmp() checks only len bytes of r->pattern against
str. If those len bytes match, strncmp() returns 0, resulting in a
false-positive match where a shorter string in a fixed-size field
matches a longer filter pattern.
For example, a 4-byte static string field containing "abcd" matched the
filter pattern "abcdefgh" because strncmp("abcd", "abcdefgh", 4)
returned 0. In this case, @len does NOT include '\0' because it is
fixed-size array.
Fix this by returning 0 (no match) early when len < r->len.
Fixes: 1889d20922 ("tracing/filters: Provide basic regex support")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/178528488779.124250.5571741156199253769.stgit@devnote2
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
trace_module_add_events() ignores the return value of __register_event()
and unconditionally calls __add_event_to_tracers() for each event.
If __register_event() fails (for example, if event_init() fails), the
trace_event_call is not added to ftrace_events list, but
__add_event_to_tracers() still creates a trace_event_file pointing to it.
If module loading subsequently fails and module memory is freed, tracing
state retains a stale trace_event_call pointer in trace_event_file,
leading to a use-after-free when tracefs or tracing subsystem operations
are later executed.
Fix this by checking the return value of __register_event() and only
calling __add_event_to_tracers() if event registration succeeded.
Fixes: ae63b31e4d ("tracing: Separate out trace events from global variables")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/178528487878.124250.14170824576025743236.stgit@devnote2
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
mmio_trace_rw() and mmio_trace_mapping() retrieve mmio_trace_array into
tr and pass it to __trace_mmiotrace_rw() and __trace_mmiotrace_map().
If these functions are invoked while mmio_trace_array is NULL (e.g. before
initialization or after disabled), accessing tr->array_buffer.buffer will
result in a NULL pointer dereference crash.
Fix this by adding an explicit NULL check for tr at the beginning of
__trace_mmiotrace_rw() and __trace_mmiotrace_map().
Link: https://patch.msgid.link/178524300062.56416.8362487250709962380.stgit@devnote2
Fixes: f984b51e07 ("ftrace: add mmiotrace plugin")
Assisted-by: Antigravity:gemini-3.6-flash
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
mmio_reset_data() is called during tracer initialization, reset, and
start. While it resets overrun_detected and prev_overruns, it neglects
to reset dropped_count. Consequently, dropped event counts from prior
tracing sessions persist in dropped_count and corrupt overrun reports
in subsequent runs.
Fix this by explicitly calling atomic_set(&dropped_count, 0) in
mmio_reset_data().
Link: https://patch.msgid.link/178524299122.56416.16277704230639425172.stgit@devnote2
Fixes: 173ed24ee2 ("mmiotrace: count events lost due to not recording")
Assisted-by: Antigravity:gemini-3.6-flash
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On RISC-V platforms where the entire physical memory (DRAM) resides
above the 32-bit address space (i.e., above dma32_phys_limit), the
current SWIOTLB initialization logic fails.
This patch addresses two interconnected issues on such platforms:
1. Incorrect 32-bit DMA bounce assumption:
The existing condition `max_pfn > PFN_DOWN(dma32_phys_limit)` assumes
that a 32-bit DMA bounce buffer is required simply because the maximum
PFN exceeds the 32-bit limit. However, if all DRAM starts above 4GB,
no memory exists below the limit to satisfy this allocation. Fix
this by adding a check to ensure `memblock_start_of_DRAM()` is actually
below the 32-bit limit before enforcing 32-bit SWIOTLB.
2. kmalloc() bounce buffer allocation failure on non-coherent systems:
For non-coherent DMA, kmalloc() buffers whose sizes are not
cache-line-aligned still require bouncing, even if 32-bit DMA bouncing
is skipped. Without the `SWIOTLB_ANY` flag, swiotlb_init() defaults to
allocating from low memory, which fails completely when DRAM only exists
in high memory. By appending `SWIOTLB_ANY` to swiotlb_flags, the allocator
is permitted to allocate this bounce buffer from high memory.
With this patch, systems with non-coherent DMA and DRAM entirely above
4GB can successfully map the software IO TLB in high memory and boot
normally.
Tested-by: Anirudh Srinivasan <asrinivasan@oss.tenstorrent.com>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.dev>
Link: https://patch.msgid.link/20260727-fix-riscv-swiotlb-v3-1-59479b23736c@linux.dev
Reviewed-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The alternative patching of sifive vendor extensions also calls the
sifive_errata_patch_func(), but the patch_id of the vendor extension
(ext + RISCV_VENDOR_EXT_ALTERNATIVES_BASE) is always larger than
ERRATA_SIFIVE_NUMBER. Remove this unnecessary warning.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Link: https://patch.msgid.link/20260503-sifive_errata-v1-1-6f12a81bc267@sifive.com
[pjw@kernel.org: drop unnecessary braces]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
When a fan tach channel is present, npcm7xx_pwm_fan_probe() starts
fan_timer. The timer callback polls tach state and rearms the timer, but
the driver has no remove callback or devm cleanup action to stop it. On
device detach, the devm-managed driver data and I/O mappings can be
released while the timer is still pending or running.
Register a devm cleanup action before starting the timer and shut the
timer down synchronously from that action.
This issue was found by a static analysis tool.
Fixes: f1fd4a4db7 ("hwmon: Add NPCM7xx PWM and Fan driver")
Cc: stable@vger.kernel.org
Signed-off-by: Hongyan Xu <getshell@seu.edu.cn>
Link: https://lore.kernel.org/r/20260729100116.790-1-getshell@seu.edu.cn
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
iface_fw_to_cpu_addr() only checks that the firmware-provided MCU virtual
address points inside the shared section. The returned pointer is later
used as a full firmware interface structure, so accepting an address near
the end of the shared section can still lead to out-of-bounds accesses.
Pass the expected object size to iface_fw_to_cpu_addr() and reject ranges
that do not fit entirely in the shared section.
Fixes: 2718d91816 ("drm/panthor: Add the FW logical block")
Cc: stable@vger.kernel.org
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20260720114918.15973-1-osama.abdelkader@gmail.com
In register_fprobe(), get_ips_from_filter() resolves target function
addresses and increments module reference counts via try_module_get() for
symbols in kernel modules. If get_ips_from_filter() fails on the second
pass and returns an error, register_fprobe() returned directly without
releasing module references acquired up to that point.
Fix this by ensuring the cleanup loop executing module_put() runs even when
get_ips_from_filter() returns a negative error.
Link: https://lore.kernel.org/all/178528125360.101985.4144133640239273153.stgit@devnote2/
Fixes: d24fa977ee ("tracing: fprobe: Fix to lock module while registering fprobe")
Assisted-by: Antigravity:gemini-3.6-flash
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
On a non-range clear, curs.size is never set, so the segment test
(next - va_curs_start > curs->size) returns false for every level > 0
before the clear_pt short-circuit is reached. The clear then descends to
level 0 instead of forming a huge zero-leaf, wasting page tables and
risking -ENOMEM on unbind.
Move the null-VMA, purged-BO and clear_pt short-circuits above the
curs->size test. The bind path always sets curs.size, so it is unaffected.
v2
- Also set curs.size on the clear path so the cursor stays meaningful
during the walk. clear_pt is only reached with range == NULL, so assert
that invariant. (Matthew Brost)
Cc: Matthew Brost <matthew.brost@intel.com>
Fixes: 5b658b7e89 ("drm/xe: Clear scratch page on vm_bind")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260728055916.593707-2-himal.prasad.ghimiray@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
(cherry picked from commit 04eeeb45cb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The RT5640 GPIO1/IRQ pin can be configured either as GPIO1 or as the
codec interrupt output.
Some boards, such as the Firefly-RK3399, do not connect the codec
interrupt output. This causes the following binding validation warning:
'interrupts' is a required property
Make the interrupts property optional to support such hardware
configurations.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://patch.msgid.link/20260727185814.2599488-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
intel_dp_hdmi_sink_max_frl() limits the sink's max FRL rate by its
DSC max FRL rate whenever the sink supports DSC 1.2.
However, the DSC max FRL rate (HF-VSDB DSC_Max_FRL_Rate) only applies
to compressed video transport, which requires a DSC 1.2 encoder in
the PCON (configured via intel_dp_pcon_dsc_configure()).
Without such an encoder the HDMI link always carries uncompressed
video, for which the regular Max_FRL_Rate is the correct limit.
Applying the DSC limit unconditionally trains the FRL link at a lower
rate than both the PCON and the sink support.
E.g. an LG OLED G4 (Max_FRL_Rate 48 Gbps, DSC_Max_FRL_Rate 24 Gbps)
behind a Synaptics VMM7100 PCON (PCON max FRL bw 48 Gbps, no DSC
encoder):
Sink max rate from EDID = 24 Gbps
FRL trained with : 24 Gbps
while Windows/macOS train the same hardware at 40/48 Gbps.
The too low FRL rate needlessly constrains the formats available to
the sink.
Only apply the sink's DSC max FRL rate if the PCON has a DSC 1.2
encoder, matching the gate in intel_dp_pcon_dsc_configure().
PCONs with a DSC encoder keep the current conservative behavior,
since the link is trained once and compressed transport may be used
for any subsequent mode.
With this the setup above trains at 48 Gbps.
Tested on PTL (xe) with the above PCON/sink combo.
Fixes: 10fec80b48 ("drm/i915/display: Configure PCON for DSC1.1 to DSC1.2 encoding")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Alexander Kaplan <alexander.kaplan@sms-medipool.de>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260718105207.5565-3-alexander.kaplan@sms-medipool.de
(cherry picked from commit 71b57dd92f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The OVL adaptor registers both an aggregate driver for its child devices
and a component for the main DRM aggregate. Probe currently ignores an
error from registering the child aggregate and leaves that aggregate
registered if registering the DRM component fails. The remove callback
also leaves the DRM component registered.
These imbalances can leave component framework entries referring to a
device whose probe failed or whose driver has been detached. The aggregate
unbind callback also fails to undo component_bind_all(), leaving its child
components marked as bound when the aggregate is removed.
Check the aggregate registration result, unwind it when the component
registration fails, and unregister the component before the aggregate on
remove. Keep runtime PM enabled until both framework registrations have
been removed, and unbind all child components from the aggregate unbind
callback.
Fixes: 453c336463 ("drm/mediatek: Add ovl_adaptor support for MT8195")
Cc: stable@vger.kernel.org # 6.4+
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20260721152242.47138-1-mhun512@gmail.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Commit 76255024ca ("drm/mediatek: mtk_dsi: enable hs clock
during pre-enable") rightfully moves the HS clock enablement to
before atomic_enable(), but it's moving it to mtk_dsi_poweron(),
which is not only called in the .atomic_pre_enable() callback
for the DRM bridge, but also in the MediaTek DRM's .ddp_start()
callback, which happens way before the bridge ones.
The HS clock enablement should be done at just the right time,
otherwise some bridge chips (or some Display Driver ICs) may
not work correctly: this is seen at least with a Parade DSI to
eDP bridge (PS8640) on the MT8173 Elm Chromebook.
This resolves a regression that was seen on the aforementioned
machine, which was happening only after a suspend-resume cycle.
Cc: <stable@vger.kernel.org> # 7.1.x
Fixes: 76255024ca ("drm/mediatek: mtk_dsi: enable hs clock during pre-enable")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Adam Thiede <me@adamthiede.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20260728153145.578404-1-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
The PCON max FRL bandwidth field lives in byte 2 of the DFP Detailed
Capability Info (DPCD 0x82 for the first DFP).
The DP standard defines the meaning of descriptor bytes 1-3 strictly
per DFP type, and for a DisplayPort type DFP all of them are
reserved, with "read all 0s" semantics (DP v2.0, section 2.12.3,
Table 2-183).
The FRL bandwidth field is an HDMI DFP extension added by the VESA
DP-to-HDMI PCON specification.
drm_dp_get_pcon_max_frl_bw() however parses the byte without checking
the DFP type, the branch presence or DETAILED_CAP_INFO_AVAILABLE.
Without the latter the port descriptors are one byte wide and
port_cap[2] is not even the right register.
All neighbouring helpers parsing the same descriptor are scoped by
the DFP type already, see for instance drm_dp_downstream_max_bpc()
reading the same byte and returning 0 for a DP type DFP.
amdgpu's DC parses the field only for HDMI(/DP++) detailed types as
well.
This is not theoretical.
A Synaptics VMM7100 based USB-C to HDMI adapter with a macOS targeted
firmware advertises a DisplayPort type DFP with the type byte
replicated across the whole descriptor (08 08 08 08).
i915 decodes that as "PCON limited to 18 Gbps FRL" and prunes every
mode above ~750 MHz dotclock, including all the 4k@100/120 modes the
sink EDID offers, while macOS drives 4k@120 through the same adapter
just fine via DP DSC (and amdgpu's type-scoped parser would ignore
the bogus field as well).
Only parse the field for an HDMI DFP behind a DPCD 1.1+ branch
device that reports detailed cap info, matching the type-scoped
field layout of the spec and the rest of the helpers.
Fixes: ce32a6239d ("drm/dp_helper: Add Helpers for FRL Link Training support for DP-HDMI2.1 PCON")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com> (v2)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.12+
Signed-off-by: Alexander Kaplan <alexander.kaplan@sms-medipool.de>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260610193825.2933-1-alexander.kaplan@sms-medipool.de
disk_release() undoes blk_mq_init_allocated_queue() for a disk whose
probe failed before add_disk(), but it only calls blk_mq_exit_queue().
Nothing there stops q->timeout, and that timer rolls forward: it stays
pending until it next expires, not until the last request completes.
So if the driver issued any I/O before adding the disk, the
request_queue is freed while still linked into a timer wheel bucket.
Commit 6f8191fdf4 ("block: simplify disk shutdown") dropped the
blk_cleanup_queue() call that used to stop it. __del_gendisk() and
blk_mq_destroy_queue() still do; only the probe failure path lost it.
nvme gets there because nvme_update_ns_info() submits Report Zones or
FDP io-mgmt-recv on ns->queue before the disk is added, so a later
failure - a concurrent reset setting NVME_CTRL_FROZEN, or
device_add_disk() failing - lands in put_disk() with the timer armed:
BUG: KASAN: slab-use-after-free in detach_if_pending+0x30c/0x340
Write of size 8 at addr ffff888004d71310 by task kworker/u8:2/37
__timer_delete_sync+0x156/0x240 kernel/time/timer.c:1621
blk_sync_queue+0x22/0x40 block/blk-core.c:222
nvme_sync_queues+0x100/0x150 drivers/nvme/host/core.c:5362
nvme_reset_work+0x138/0x930 drivers/nvme/host/pci.c:3264
Allocated by task 34:
__blk_mq_alloc_disk+0x33/0x100 block/blk-mq.c:4462
nvme_alloc_ns+0x290/0x3870 drivers/nvme/host/core.c:4146
Freed by task 0:
blk_free_queue_rcu+0x3a/0x50 block/blk-core.c:254
rcu_core+0xc10/0x1730 kernel/rcu/tree.c:2857
The queue being synced there is ctrl->admin_q, only a victim sharing a
timer wheel bucket with the freed queue's dangling entry; other runs
tripped in enqueue_timer(), __run_timers() or blk_mq_timeout_work().
Failing nvme_alloc_ns() with a debug patch makes it deterministic: one
leaked timer trips KASAN within seconds, while 1987 patched releases
produced no splat.
Stop the timer and the queue work items before blk_mq_exit_queue(), like
blk_mq_destroy_queue() does.
Found by FuzzNvme.
Fixes: 6f8191fdf4 ("block: simplify disk shutdown")
Acked-by: Weidong Zhu <weizhu@fiu.edu>
Signed-off-by: Chao Shi <coshi036@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260727201257.211635-1-coshi036@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
es58x_read_bulk_callback() resubmits the RX URB after processing a received
packet. If the resubmit succeeds, the URB remains anchored and will be
handled by the normal RX path or by teardown.
However, if usb_submit_urb() fails, the callback unanchors the URB and then
returns directly. This skips the existing free_urb path, so the coherent
transfer buffer allocated with usb_alloc_coherent() is not released.
Reuse the existing free_urb path after a resubmit failure so that the RX
coherent buffer is freed before leaving the callback.
Fixes: 5eaad4f768 ("can: usb: etas_es58x: correctly anchor the urb in the read bulk callback")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20260706014601.415445-1-lgs201920130244@gmail.com
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
If the allocation of the SKB in gs_usb_receive_bulk_callback() fails, the
driver returns from the callback without resubmitting the URB in order to
receive further USB in URBs.
This results in a silent performance degradation which, if it occurs
repeatedly, results in starvation of USB in traffic.
Instead of returning immediately, try to resend the URB. If this also
fails, this is logged as an info message.
Fixes: d08e973a77 ("can: gs_usb: Added support for the GS_USB CAN devices")
Fixes: 26949ac935 ("can: gs_usb: add CAN-FD support")
Link: https://patch.msgid.link/20260709-gs_usb-resubmit-urb-v1-1-4dd40030cc84@pengutronix.de
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
c_can_chip_config() was programming C_CAN_CTRL_REG without CONTROL_INIT,
which may allow the controller to become active before
c_can_set_bittiming() finishes.
That creates a short timing window where the peripheral can interact with
the bus using a different/default bitrate, potentially generating bus
errors and corrupting traffic.
Set CONTROL_INIT together with the control-mode writes in
c_can_chip_config() (normal, loopback and listen-only paths), so the
controller stays halted until bit timing is fully programmed.
This prevents transient bus disturbance during startup when the configured
bitrate differs from the active bus bitrate.
Signed-off-by: Lucas Martins Alves <lucas.alves@lumal21.com.br>
Link: https://patch.msgid.link/20260714164839.771123-1-lucas.alves@lumal21.com.br
Fixes: 881ff67ad4 ("can: c_can: Added support for Bosch C_CAN controller")
Cc: stable@kernel.org
[mkl: remove space before close parenthesis]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
fw_parse() reads a fixed record header, a firmware-provided payload,
and a trailing checksum without knowing the end of the firmware blob. A
truncated record can therefore make those reads exceed the blob.
The same record also supplies addresses and lengths for writes into
DPRAM. The generic loader uses wrap-prone mixed signed arithmetic for its
bounds check, while the application loader does not bound the staging
copy at all.
Pass the firmware end to the parser and validate the full source record.
Use a signed wide offset for generic DPRAM records and validate the
application staging span against the mapped DPRAM before copying.
Fixes: 03fd3cf5a1 ("can: add driver for Softing card")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260722044347.2708-1-pengpeng@iscas.ac.cn
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Testing CANFD on RZ/G3E shows that many registers do not reset to their
initial values with the current flow of deasserting resets first and then
enabling clocks.
Based on the HW manual, clocks should be supplied first and the
resets deasserted afterward.
section 7.4.3 Procedure for Activating Modules: RZ/G2L
section 4.4.9.3 Procedure for Starting up Units: RZ/G3E
So, update the order of the initializing flow for resets and clocks
to match the hardware manual, resetting all CANFD registers to their
initial values. Also update rcar_canfd_global_deinit() to assert
resets before disabling clocks, so the teardown path mirrors the new
init ordering.
Fixes: 76e9353a80 ("can: rcar_canfd: Add support for RZ/G2L family")
Signed-off-by: Tu Nguyen <tu.nguyen.xg@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20260625135216.130450-1-biju.das.jz@bp.renesas.com
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The wait and bulk receive paths walk variable-length commands from a
USB buffer. A nonzero command shorter than CMD_HEADER_LEN can still be
dispatched, and the wait path copies a matching command into a fixed
caller-owned struct kvaser_cmd using the device-provided length.
Reject nonzero commands that do not contain the fixed header or that
extend beyond the current USB buffer item. In the wait path, also reject
a matching command that exceeds the destination before copying it.
Fixes: 080f40a6fa ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260722042221.44066-1-pengpeng@iscas.ac.cn
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In peak_usb_start(), each RX URB transfer buffer is allocated with kmalloc()
and the URB is flagged URB_FREE_BUFFER so that the final usb_free_urb() also
frees the transfer buffer.
If usb_submit_urb() fails, the error path frees the buffer explicitly with
kfree(buf) and then calls usb_free_urb(urb). Because URB_FREE_BUFFER is set,
usb_free_urb() -> urb_destroy() frees the same buffer a second time, a double
free of the transfer buffer.
BUG: KASAN: double-free in usb_free_urb.part.0+0x91/0xb0
Free of addr ffff8881069ccb80 by task trigger.sh/285
Call Trace:
kfree+0x113/0x3c0
usb_free_urb.part.0+0x91/0xb0
Drop the redundant kfree(buf); usb_free_urb() already releases the transfer
buffer. This mirrors commit 03819abbeb ("net: usb: lan78xx: Fix double free
issue with interrupt buffer allocation").
Fixes: bb4785551f ("can: usb: PEAK-System Technik USB adapters driver core")
Closes: https://lore.kernel.org/linux-can/178159320216.2154888.16953451793788581739@maoyixie.com/T/#u
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/178163373110.2507866.216458825145756798@maoyixie.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The channel control index ctrl_idx is derived from rx->len which comes
directly from a device USB payload. The mask 0x0f allows values 0-15, but
the array size of usb_if->dev[] is only 2. Values 2-15 cause heap
out-of-bounds read, eventually causing kernel panic in the IRQ context.
Add bounds checking for ctrl_idx before the array access in both
pcan_usb_pro_handle_canmsg() and pcan_usb_pro_handle_error().
Fixes: d8a199355f ("can: usb: PEAK-System Technik PCAN-USB Pro specific part")
Signed-off-by: James Gao <jamesgao5@outlook.com>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/TYWPR01MB8559DBAAAA6A7F410400329CF0012@TYWPR01MB8559.jpnprd01.prod.outlook.com
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The driver has a match table for the pci bus wired into its driver
structure, but the table is not exported with MODULE_DEVICE_TABLE().
Add the missing MODULE_DEVICE_TABLE() entry so module alias information
is generated for automatic module loading.
This is a source-level fix. It does not claim dynamic hardware
reproduction; the evidence is the driver-owned match table, its use by
the driver registration structure, and the missing module alias
publication.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Acked-by: Pavel Pisa <pisa@fel.cvut.cz>
Link: https://patch.msgid.link/20260704151957.48194-1-pengpeng@iscas.ac.cn
Fixes: 792a5b678e ("can: ctucanfd: CTU CAN FD open-source IP core - PCI bus support.")
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Include REG_INT_STAT_BEI in the top-level error interrupt condition.
BEI is enabled when CAN_CTRLMODE_BERR_REPORTING is requested and
ctucan_err_interrupt() already handles it. Without checking and
clearing BEI in the top-level handler, bus error interrupts are not
handled or acknowledged.
Fixes: 2dcb8e8782 ("can: ctucanfd: add support for CTU CAN FD open-source IP core - bus independent part.")
Signed-off-by: Avi Weiss <thnkslprpt@gmail.com>
Acked-by: Pavel Pisa <pisa@fel.cvut.cz>
Link: https://patch.msgid.link/20260723074403.131575-1-thnkslprpt@gmail.com
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Register the netdevice notifier before can_proto_register() and check the
return value. If protocol registration fails, unregister the notifier
before returning the error.
Align isotp_module_init() with the reordering already done for raw.c
(commit c28b3bffe4 ("can: raw: process optimization in raw_init()")) and
bcm.c (commit edd1a7e42f ("can: bcm: registration process optimization
in bcm_module_init()")).
Fixes: 8d0caedb75 ("can: bcm/raw/isotp: use per module netdevice notifier")
Signed-off-by: Minhong He <heminhong@kylinos.cn>
Link: https://patch.msgid.link/20260729085656.134523-1-heminhong@kylinos.cn
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
sxgbe_open() ignores the return value of init_dma_desc_rings() and
continues to program DMA with invalid ring addresses when allocation
fails. Check the return value and disconnect the PHY on failure.
Fixes: 1edb9ca69e ("net: sxgbe: add basic framework for Samsung 10Gb ethernet driver")
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
When RX descriptor ring allocation fails, init_dma_desc_rings() only
frees the partially allocated RX rings and returns. The TX rings that
were allocated earlier in the same function are leaked.
Rearrange error labels to clean up TX rings upon RX failures.
Fixes: 1edb9ca69e ("net: sxgbe: add basic framework for Samsung 10Gb ethernet driver")
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is a follow-up to commit cf070fe33b ("can: isotp: serialize
TX state transitions under so->rx_lock") which addresses following
sashiko-bot findings:
- isotp_sendmsg(): drain so->txfrtimer first so a stale callback can't
re-arm echotimer after the claim
- isotp_release(): wake so->wait after forcing ISOTP_SHUTDOWN so a
sleeping sendmsg() claim isn't stranded
- isotp_sendmsg(): have both wait_event_interruptible() calls in
isotp_sendmsg() also wake on ISOTP_SHUTDOWN and do not return claim to
IDLE to avoid corrupting a concurrent isotp_release() process.
- isotp_sendmsg(): handle potential claim of a new transfer when
the wait_event_interruptible() call returns in CAN_ISOTP_WAIT_TX_DONE
mode. Don't touch timers and states of the new transfer if a new thread
incremented so->tx_gen before getting the lock at err_event_drop.
- isotp_sendmsg(): handle a stuck can_send() and omit timer and state
changes if a new transfer was claimed. wait_tx_done() returns the error
recorded in so->tx_result[], tagged with the caller's own generation.
- isotp_tx_timeout(): on a claimed timeout, record the ECOMM error for
the timed-out transfer's own generation in so->tx_result[]; sk->sk_err
is raised unconditionally, same as every other error path here.
- isotp_tx_gen_done()/isotp_tx_timeout(): always read tx.state (acquire)
before tx_gen - the reverse order let a weakly ordered CPU pair a fresh
tx.state with a stale tx_gen/tx_result slot.
- isotp_sendmsg(): wait_tx_done: drain sk_err via sock_error() once we
have read the result from so->tx_result[], so an already-reported error
doesn't stay latched for a later poll()/SO_ERROR.
Also align the remaining lock-free so->tx.state/rx.state/cfecho accesses
and use skb->hash as unique loopback echo frame indicator.
Fixes: cf070fe33b ("can: isotp: serialize TX state transitions under so->rx_lock")
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260724181525.43556-1-socketcan@hartkopp.net
Cc: stable@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oleksij Rempel <o.rempel@pengutronix.de> says:
This series collects and resends two j1939 patches that were previously
lost on their way upstream. They address different, unconnected issues in
the stack:
- Patch 1 prevents residual data leaks by zeroing the allocated receive
buffer in j1939_session_fresh_new().
- Patch 2 implements netdevice_tracker for j1939_{priv,session,ecu}
management to help investigate a dev_hold()/dev_put() refcount
leak (unregister_netdevice() waiting for vcan0) reported by syzbot.
Link: https://patch.msgid.link/20260728055835.1151785-1-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add subsystem ID 103c:88ed to the existing HP Victus 16-e0xxx
mute LED quirk list.
The HP Victus 16-e0xxx with subsystem ID 103c:88ed uses the same
mute LED coefficient configuration as the already supported
103c:88eb variant.
The mute LED was verified by manually toggling coefficient index
0x0b (bit 3) using hda-verb. After adding the quirk, the LED is
registered as hda::mute and follows the audio mute state.
Signed-off-by: André Pragosa <pragosa512@gmail.com>
Link: https://patch.msgid.link/20260728221129.14680-2-pragosa512@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The C-Media CM6206 (0d8c:0102) truncates the three-byte sample rate it
returns for UAC_GET_CUR to its two low bytes. After the rate has been
set to 96000 (0x017700) the device reports back 30464 (0x007700).
At probe time the driver initializes every altsetting to its maximum
rate, so altsetting 5 is set to 96000 and the warning appears on each
plug-in, before anything has opened the device:
usb 3-1.3: 1:5 Set sample rate 96000, clock 0
usb 3-1.3: current rate 30464 is different from the runtime rate 96000
That altsetting is the one parse_audio_format_rates_v1() already fixes
up for this chip, so this affects every CM6206.
Only the read-back is broken, the rate itself is applied: a 1 kHz sine
rendered at 96 kHz is recovered at 1000.2 Hz, and a silent fallback to
48000 would have been reported as 0x00bb80 rather than as the low half
of the requested rate.
Add a QUIRK_FLAG_GET_SAMPLE_RATE entry for the device so the read-back
is skipped. Setting the same flag through the quirk_flags module
parameter makes the warning disappear while the 96000 init still
happens.
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Link: https://patch.msgid.link/20260728222239.62749-1-mikhail.v.gavrilov@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_usb_handle_sync_urb() scales received sync packet sizes by the sender's
stride and stores the result directly in out_packet->packet_size[i]. If a
connected USB device sends an oversized sync packet, this frame count can
exceed ep->maxframesize.
The un-clamped frame count then propagates to the playback endpoint queue,
potentially driving packet transfers beyond the endpoint's hardware frame
limits.
Cap the calculated frame count against ep->maxframesize in
snd_usb_handle_sync_urb() to prevent oversized packets from entering the
playback queue.
Fixes: 28acb12014 ("ALSA: usb-audio: use sender stride for implicit feedback")
Cc: stable@vger.kernel.org
Assisted-by: Jetski:Gemini-3.6-Flash
Signed-off-by: Sonali Pradhan <sonalipradhan@google.com>
Link: https://patch.msgid.link/20260728202432.2354994-1-sonalipradhan@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a USB audio endpoint requests full packet transfers via the fill_max
descriptor flag, data_ep_set_params() promotes ep->curpacksize to
ep->maxpacksize. However, maxsize is left at the original sample-rate
derived value.
Since u->buffer_size is allocated as maxsize * packets, the resulting
DMA buffer is far too small for the requested transfer length. When the
USB host controller streams up to curpacksize bytes per packet, it writes
past the end of the buffer via DMA, corrupting kernel heap memory.
Update maxsize to curpacksize when fill_max is set so that the allocated
DMA buffer size matches the actual transfer request size.
[ changed to reassign maxsize only when ep->fill_max is set -- tiwai ]
Fixes: 8fdff6a319 ("ALSA: snd-usb: implement new endpoint streaming model")
Cc: stable@vger.kernel.org
Assisted-by: Jetski:Gemini-3.6-Flash
Signed-off-by: Sonali Pradhan <sonalipradhan@google.com>
Link: https://patch.msgid.link/20260728201716.2347726-1-sonalipradhan@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The inner loop of ata_scsi_lpm_supported() uses the wrong variable when
iterating.
It should obviously use the link that we are currently iterating over,
rather than always using the host link.
ata_scsi_lpm_supported() is used to control if a user should be allowed
to change lpm policy (from the default) via sysfs.
Thus, this bug could potentially disallow users to change the LPM policy
for certain SATA devices via sysfs.
Cc: stable@vger.kernel.org
Fixes: 0060beec0b ("ata: libata-sata: Add link_power_management_supported sysfs attribute")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Link: https://lore.kernel.org/linux-ide/20260728112200.B99F21F000E9@smtp.kernel.org/
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
PF and VF NIX LFs that share a CGX LMAC reuse the same hardware PKIND
programming. When HiGig2 or EDSA parsing is enabled, a VF NIX LF alloc must
not reset the LMAC RX PKIND or default TX parse config over the PF setup.
Add cgx_get_pkind() and rvu_cgx_is_pkind_config_permitted() so VFs skip
cgx_set_pkind(), rvu_npc_set_pkind(), and NIX_AF_LFX_TX_PARSE_CFG updates
when the LMAC is using NPC_RX_HIGIG_PKIND or NPC_RX_EDSA_PKIND.
Fixes: 94d942c5fb ("octeontx2-af: Config pkind for CGX mapped PFs")
Cc: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://patch.msgid.link/20260722081229.1653619-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When target_get_sess_cmd() fails during session shutdown because
percpu_ref_tryget_live() returns false, the command keeps the
se_cmd->cmd_cnt pointer that __target_init_cmd() assigned earlier
without owning a reference. Final release through
target_release_cmd_kref() then issues an unmatched percpu_ref_put().
Commit 8e288be860 ("scsi: target: Pass in cmd counter to use during
cmd setup") moved the cmd_cnt assignment ahead of the reference
acquisition. Clear se_cmd->cmd_cnt whenever the initial
target_get_sess_cmd() fails in target_init_cmd() and
target_submit_tmr(), so release performs exactly one matching put per
acquired reference.
Fixes: 8e288be860 ("scsi: target: Pass in cmd counter to use during cmd setup")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Link: https://patch.msgid.link/20260722-reference-count-underflow-in-target-v1-1-63ab664f12fd@nvidia.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
UFS RTC support schedules ufs_rtc_update_work to periodically update the
device RTC. The work can issue query commands and access the UFS host
controller.
A previous change moved the RTC work cancellation before the PRE_CHANGE
vendor suspend callback to close a race in the common suspend path.
However, the active-active path jumps directly to vops_suspend after
flushing exception handling work and therefore bypasses the
cancellation.
If the RTC work runs while the vendor suspend callback is gating or
otherwise changing hardware state, it can access the controller during
suspend and trigger an SError.
Cancel the RTC work before entering the vendor suspend callback in the
active-active path. Since this path now cancels the work, move the RTC
work scheduling outside the device and link state restoration block in
the resume path. This restarts RTC updates after an active-active
suspend and resume cycle.
Fixes: b0bd84c392 ("scsi: ufs: core: Fix SError in ufshcd_rtc_work() during UFS suspend")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260714172726.1736967-1-lgs201920130244@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
resp_report_zones() sizes the reply buffer from the CDB allocation
length. The v3 fix rounds alloc_len up with ALIGN() before deriving the
descriptor count:
rep_max_zones = (ALIGN((u64)alloc_len, RZONES_DESC_HD) -
RZONES_DESC_HD) >> ilog2(RZONES_DESC_HD);
arr_len = (u64)RZONES_DESC_HD * (rep_max_zones + 1);
For alloc_len in 0xFFFFFFC1..0xFFFFFFFF, ALIGN() rounds up to
0x100000000, so arr_len is 4 GB. On 32-bit, kzalloc()'s size_t is 32-bit
and truncates 0x100000000 to 0; kzalloc(0) returns ZERO_SIZE_PTR, which
passes the !arr check, and desc = arr + 64 is then dereferenced in the
loop -> out-of-bounds write / panic.
Clamp rep_max_zones to devip->nr_zones. The loop already stops at
sdebug_capacity (after nr_zones zones), so a report can never hold more
than nr_zones descriptors; the clamp does not change the report, it only
bounds arr_len to (nr_zones + 1) * RZONES_DESC_HD, a real device
property that can never reach 0x100000000.
Fixes: 7db0e0c819 ("scsi: scsi_debug: Fix buffer size of REPORT ZONES command")
Suggested-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ibrahim Hashimov <security@auditcode.ai>
Assisted-by: AuditCode-AI:2026.07
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260712183739.83915-1-security@auditcode.ai
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In the iblock_execute_pr_out() function, PRO_PREEMPT,
PRO_PREEMPT_AND_ABORT, and PRO_RELEASE all perform callback capability
checks through ops->pr_clear. The error check allows unimplemented hooks
to pass through the gate, resulting dereferencing a NULL function
pointer.
Check whether the hooks that need to be called are supported.
Fixes: 394f811848 ("scsi: target: Add block PR support to iblock")
Signed-off-by: TanZheng <tanzheng@kylinos.cn>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Link: https://patch.msgid.link/20260724075850.280699-1-kensanya@163.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If a command times out while we have deferred non-NCQ commands waiting to
be issued, the SCSI EH task is not immediately woken up as the waiting
deferred commands are never issued nor completed, thus leaving the SCSI
host in a busy state (shost->host_failed != scsi_host_busy(shost)) which
prevents the SCSI EH task from being woken up. Eventually, when the
deferred commands also time out, the SCSI EH task is woken up and the
timeout processing occurs.
Avoid this unnecessary additional SCSI EH wake up time with the same
method as implemented in libata-scsi, using the eh_timed_out SCSI host
template operation. The function sas_eh_timed_out() implements this
operation and executes the function ata_scsi_retry_deferred_qc()
for SATA devices.
Co-developed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Fixes: 0ea84089db ("ata: libata-scsi: avoid Non-NCQ command starvation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Tested-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Modify atapi_qc_complete() to call ata_scsi_schedule_deferred_qc() to
ensure that any deferred queued command can execute. This is similar to
ata_scsi_qc_complete() function for regular ATA devices.
Fixes: 0ea84089db ("ata: libata-scsi: avoid Non-NCQ command starvation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
If a command times out while we have deferred non-NCQ commands waiting to
be issued, the SCSI EH task is not immediately woken up as the waiting
deferred commands are never issued nor completed, thus leaving the SCSI
host in a busy state (shost->host_failed != scsi_host_busy(shost)) which
prevents the SCSI EH task from being woken up. Eventually, when the
deferred commands also time out, the SCSI EH task is woken up and the
timeout processing occurs.
Avoid this unnecessary SCSI EH task wake-up additional time by scheduling
a retry of all waiting deferred QCs, using the eh_timed_out SCSI host
template operation. The function ata_scsi_eh_timed_out() is introduced to
implement this operation.
However, terminating deferred commands with DID_REQUEUE to force a retry
by calling the function ata_scsi_requeue_deferred_qc() may still keep the
SCSI host in a busy state because the block layer may immediately re-issue
these commands. The solution to this is to schedule libata EH for the
port which suffered the command timeout to prevent accepting any new
command. ata_scsi_requeue_deferred_qc() is modified to add a call to
ata_port_schedule_eh() for this purpose.
In addition to this change, ata_scsi_requeue_deferred_qc() is also
modified to take a new timedout_scmd scsi command argument which indicates
the SCSI command that timed out. With this additional argument,
ata_scsi_requeue_deferred_qc() can now also terminate with DID_TIME_OUT
any timed out deferred qc, which simplifies ata_scsi_cmd_error_handler().
In this case, ata_scsi_requeue_deferred_qc() returns SCSI_EH_DONE, with
this return value propagated back to the ata_scsi_eh_timed_out() operation
to indicate to scsi_timeout() that the timed out command was handled and
no further processing is needed.
For non-timed out deferred qc that need to be retried,
ata_scsi_requeue_deferred_qc() returns SCSI_EH_NOT_HANDLED, thus
indicating to scsi_timeout() that the timed out command needs to go
through the SCSI EH (and libata EH) processing by adding it to the EH work
queue with scsi_eh_scmd_add().
One side effect of these changes is that the function atapi_qc_complete()
needs to be modified to ensure that a deferred ATAPI command that needs
to be retried is completed with DID_REQUEUE instead of the default
SAM_STAT_GOOD status, and a command that timed out is completed with
DID_TIME_OUT instead of SAM_STAT_CHECK_CONDITION.
Fixes: 0ea84089db ("ata: libata-scsi: avoid Non-NCQ command starvation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Tested-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
In phylink_create() if phylink_register_sfp() returns an error, link_gpio
obtained by phylink_parse_fixedlink() is never released. While this is a
very unlikely scenario, it's worth to fix/handle this.
This was present from the very first implementation of phylink but got
relevant only with the introduction of ce0aa27ff3 ("sfp: add sfp-bus to
bridge between network devices and sfp cages") where additional function
were added after phylink_parse_fixedlink() making the release of link_gpio
needed if such additional function errored out.
While at it, restructure the exit condition of phylink_create() with the
goto pattern to reduce code duplication on handling error conditions.
Fixes: ce0aa27ff3 ("sfp: add sfp-bus to bridge between network devices and sfp cages")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260726150806.2437-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Patch series "selftests: Add missing initalization of pointer passed to
getline", v2.
This patch (of 2):
Clone3_set_tid uses getline(&line, ...) in a loop to read the child's
process status. The code expects that getline allocates the buffer for
the line on the first loop iteration. According to the Open Group
Spec[1], char *line has to be null pointer for this:
> ssize_t getline(char **restrict lineptr, ...);
> If *lineptr is a null pointer or if the object pointed to by *lineptr
> is of insufficient size, an object shall be allocated as if by
malloc()
> or the object shall be reallocated as if by realloc()[...].
However, char *line is only declared, leading to an undefined value that
is potentially non-null. In an example run with Musl v1.2.6, the realloc
call[2] of getdelim, which implements getline, triggers a segfault:
./run_kselftest.sh --test clone3:clone3_set_tid
[ 1366.165898] kselftest: Running tests in clone3
...
[ 1367.799244] clone3_set_tid[811]: unhandled signal 11 code 0x1 at
0x0000000000000000 in libc.so[68184,3fbf69f000+4c000]
[ 1367.802808] CPU: 0 UID: 0 PID: 811 Comm: clone3_set_tid Not tainted
..
[ 1367.804188] epc: 0x0000003fbf6b0184
[ 1367.804188] ra : 0x0000003fbf6d4664
[ 1367.804188] sp : 0x0000003fce5f2e40
[ 1367.805314] gp : 0x0000002aaab0dfb8
[ 1367.805314] tp : 0x0000003fbf6f14a8
[ 1367.805314] t0 : 0x0000003fbf63d000
...
Looking at the realloc implementation, Musl mallocs for a null pointer
memory. But for a non-null pointer, it assumes it's passed a valid
pointer to the heap and tries to access its meta-data. This leads to the
segfault we see:
void *realloc(void *p, size_t n)
{
if (!p) return malloc(n);
if (size_overflows(n)) return 0;
struct meta *g = get_meta(p);
...
}
Fix this by properly initializing the line pointer to NULL.
Link: https://lore.kernel.org/20260722130246.2135563-1-christian.gellermann@codasip.com
Link: https://lore.kernel.org/20260722130246.2135563-2-christian.gellermann@codasip.com
Link: https://pubs.opengroup.org/onlinepubs/9799919799/functions/getline.html [1]
Link: https://git.musl-libc.org/cgit/musl/tree/src/stdio/getdelim.c#n38 [2]
Fixes: 41585bbeee ("selftests: add tests for clone3() with *set_tid")
Signed-off-by: Chris Gellermann <christian.gellermann@codasip.com>
Acked-by: David Hildenbrand (arm) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
During PM freeze (e.g. S3 suspend or S4 hibernation), device drivers like
virtio_balloon reset their underlying virtio devices and delete their
virtqueues via vdev->config->del_vqs().
However, page reporting work (page_reporting_process) was scheduled on the
global system_wq. Because system_wq lacks the WQ_FREEZABLE flag, the PM
freezer skips it, leaving page_reporting_process active during suspend.
If pages are freed into the buddy allocator while suspending (for example,
when core MM invokes the balloon shrinker during S4 hibernation image
saving), page reporting triggers virtballoon_free_page_report() on deleted
virtqueues, resulting in a Use-After-Free / General Protection Fault:
[ 196.795226] general protection fault, probably for non-canonical address 0xaa1436fe70dae6df: 0000 [#1] SMP NOPTI
[ 196.825967] Workqueue: events page_reporting_process
[ 196.831038] RIP: 0010:virtqueue_add_split+0x233/0x4c0 [virtio_ring]
[ 196.927073] virtballoon_free_page_report+0x3a/0xe0 [virtio_balloon]
[ 196.946943] page_reporting_process+0x370/0x4f0
Fix this by switching page reporting work to system_freezable_wq. This
ensures that the PM freezer pauses page_reporting_process before device
drivers destroy their reporting virtqueues. Because the reporting worker
is frozen, memory reclamation/freeing (e.g. via shrinker execution) can
safely return pages to MM during freeze without triggering unfrozen
reporting work on deleted virtqueues.
This aligns with the driver's existing design. The comment in
virtballoon_freeze() states:
/*
* The workqueue is already frozen by the PM core before this
* function is called.
*/
Testing:
I have verified these fixes using Google’s virtualization infrastructure
by running continuous suspend/resume iterations (40+ cycles) while
churning memory using stress-ng (`stress-ng --vm 4 --vm-bytes 60%
--timeout 1`) to constantly create free pages for the buddy allocator. We
also set the `page_reporting_order` parameter to 0 to make the page
reporting worker highly sensitive, forcing it to pick up any 4K free
pages. This confirmed that the UAF crashes are no longer reproducible.
Link: https://lore.kernel.org/20260721005603.1710551-1-linkl@google.com
Fixes: 36e66c554b ("mm: introduce Reported pages")
Signed-off-by: Link Lin <linkl@google.com>
Suggested-by: David Hildenbrand (Arm) <david@kernel.org>
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Proactive reclaim (triggered via memory.reclaim or node sysfs) checks for
pending signals in its outer loop in user_proactive_reclaim(). However,
the inner reclaim loops—specifically scanning cgroups in shrink_many()
and evicting/aging folios in try_to_shrink_lruvec()—can run for a long
time before returning to the outer loop, especially on systems with many
cgroups or large memory sizes.
During system suspend, the PM freezer attempts to freeze all tasks by
sending fake signals (setting TIF_SIGPENDING). Because the inner loops do
not check for pending signals, the proactive reclaim task can remain stuck
in kernel space for seconds, failing to enter the refrigerator in a timely
manner. This leads to suspend failures due to freeze timeouts, a behavior
observed on Android devices.
This latency issue is specific to proactive reclaim because of its large,
user-defined reclaim targets (could be gigabytes). Since commit
287d5fedb3 ("mm: memcg: use larger batches for proactive reclaim"),
proactive reclaim uses larger decaying batch sizes (starting at 1/4 of the
remaining target) to maintain throughput. This keeps the task in the
inner reclaim loop for extended periods. In contrast, reactive reclaim
(global/memcg) uses small targets (SWAP_CLUSTER_MAX, typically 32 pages),
allowing it to return to the outer loop and check signals frequently.
To fix this, add a signal_pending() check to should_abort_scan() for
proactive reclaim paths. Since should_abort_scan() is called within the
inner scanning and eviction loops, this allows proactive reclaim to abort
early and return to the outer loop in user_proactive_reclaim().
Additionally, return -ERESTARTSYS instead of -EINTR in
user_proactive_reclaim(). When interrupted by system suspend, returning
-ERESTARTSYS allows the task to enter the refrigerator and automatically
restart the syscall upon resume, making the freezer transparent to
userspace. For real signals, the signal layer will either restart the
syscall (if SA_RESTART is set) or return -EINTR to userspace.
This fix specifically targets Multi-Gen LRU (MGLRU). Classic LRU's scan
targets per iteration are strictly bounded by get_scan_count(), which
ensures it returns to the outer loop more frequently.
The check in should_abort_scan() is limited to proactive reclaim
(sc->proactive) to avoid inadvertently affecting reactive reclaim paths,
and is wrapped in unlikely() as it is a slow path.
Link: https://lore.kernel.org/20260720044103.905191-1-richardycc@google.com
Fixes: 287d5fedb3 ("mm: memcg: use larger batches for proactive reclaim")
Fixes: 94968384dd ("memcg: introduce per-memcg reclaim interface")
Suggested-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Richard Chang <richardycc@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Martin Liu <liumartin@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: T.J. Mercier <tjmercier@google.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Yuanchu Xie <yuanchu@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
__folio_split() keeps dereferencing the mapping after the split:
shmem_uncharge(mapping->host) and remap_page() while the folios are still
frozen/locked, and i_mmap_unlock_read(mapping) at the very end, after the
after-split folios have been unlocked and freed.
Nothing holds an inode reference across that. The split relies on @folio
-- which the beyond-EOF drop loop never removes, as it starts at
folio_next(folio) -- staying locked and in the page cache to hold off
eviction. But the unlock loop unlocks @folio before i_mmap_unlock_read()
runs. If the caller's @lock_at is a tail beyond EOF, as memory_failure()
passes when splitting a poisoned tail of a shmem THP that reaches past
i_size during truncation, it too is gone from the page cache; so once
@folio is unlocked no locked, in-cache folio pins the inode, and a
concurrent final iput() can evict and RCU-free it before
i_mmap_unlock_read() touches i_mmap_rwsem:
BUG: KASAN: slab-use-after-free in __up_read+0x634/0x790
i_mmap_unlock_read include/linux/fs.h:537 [inline]
__folio_split+0x732/0x1640 mm/huge_memory.c:4100
try_to_split_thp_page+0xab/0x390 mm/memory-failure.c:1675
memory_failure+0x1394/0x26e0 mm/memory-failure.c:2470
Freed by task 4601:
shmem_free_in_core_inode+0x54/0xb0 mm/shmem.c:5177
evict+0x57f/0xac0 fs/inode.c:870
Do every mapping dereference while @folio still pins the inode: drop
i_mmap_rwsem right after remap_page(), before the loop that unlocks and
frees the after-split folios, and clear @mapping so the exit path does not
unlock it again. shmem_uncharge() and remap_page() already run before
that point, so after this nothing past the unlock loop touches the inode
or the mapping.
This is now a rule the split depends on, alongside keeping @folio frozen
until the page cache is updated: no inode or mapping dereference once the
after-split folios start being unlocked.
Link: https://lore.kernel.org/20260716095424.471052-1-kirill@shutemov.name
Fixes: baa355fd33 ("thp: file pages support for split_huge_page()")
Signed-off-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reported-by: Hao Zhang <zhanghao1@kylinos.cn>
Closes: https://lore.kernel.org/linux-mm/20260710071344.GA106129@zh-pc
Co-developed-by: Hao Zhang <zhanghao1@kylinos.cn>
Signed-off-by: Hao Zhang <zhanghao1@kylinos.cn>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: fix PMD level mTHP accounting bugs", v2.
While running selftests I noticed the PMD level per-mTHP stats (nr_anon)
remained elevated after each run. After further investigation I noticed
this accounting error occurs for both the migration.private_anon_htlb_test
and the HMM tests.
In the HMM case this is due to folio_add_new_anon_rmap() incrementing the
mTHP stats, but never containing a corresponding decrement in
free_zone_device_folio(). We solve this by making sure to decrement the
counter when freeing device memory.
In the migration case, we are incrementing this counter without first
checking whether this folio is a hugetlb folio, which relies on a separate
accounting system. We solve this by adding the proper hugetlb check
before incrementing this counter.
With these changes in place, the two tests no longer cause elevated PMD
level accounting issues.
This patch (of 2):
When a zone device folio is mapped as anonymous, folio_add_new_anon_rmap()
increments MTHP_STAT_NR_ANON. The corresponding decrement lives in
__free_pages_prepare() in page_alloc.c, but zone device folios are freed
via free_zone_device_folio() which never calls __free_pages_prepare().
This causes nr_anon to remain permanently elevated after zone device
folios are freed.
Add the missing mod_mthp_stat() decrement to free_zone_device_folio() so
that the counter is properly balanced.
Link: https://lore.kernel.org/20260717064502.1980173-1-npache@redhat.com
Link: https://lore.kernel.org/20260717064502.1980173-2-npache@redhat.com
Fixes: 5d65c8d758 ("mm: count the number of anonymous THPs per size")
Co-developed-by: David Hildenbrand <david@kernel.org>
Signed-off-by: David Hildenbrand <david@kernel.org>
Signed-off-by: Nico Pache <npache@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Gregory Price <gourry@gourry.net>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mem_cgroup_oom() passes an uninitialized "locked" to memcg1_oom_prepare()
and reads it back in memcg1_oom_finish():
bool locked, ret;
...
if (!memcg1_oom_prepare(memcg, &locked))
return false;
ret = mem_cgroup_out_of_memory(memcg, mask, order);
memcg1_oom_finish(memcg, locked);
This relies on memcg1_oom_prepare() setting *locked whenever it returns
true. The CONFIG_MEMCG_V1=y version does, but the stub used when
CONFIG_MEMCG_V1=n returns true without touching *locked, so
memcg1_oom_finish() consumes an uninitialized value. On a memcg OOM this
is reported by UBSAN:
UBSAN: invalid-load in mm/memcontrol.c:1932:27
load of value 0 is not a valid value for type 'bool' (aka '_Bool')
Initialize *locked to false in the stub; with cgroup v1 compiled out there
is no OOM lock to take.
Link: https://lore.kernel.org/20260716-memcg-oom-uninit-locked-v2-1-63631d878eb4@debian.org
Fixes: e93d4166b4 ("mm: memcg: put cgroup v1-specific code under a config option")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_sync: Fix advertising data UAFs
- hci_conn: hold conn reference fixes
- L2CAP: fix UAF in l2cap_le_connect_rsp
- RFCOMM: validate skb length in rfcomm_recv_frame
- ISO: Locking fixes
- SCO: give the socket its own sco_conn reference
- MGMT: fix UAF in pair command cancellation
- MGMT: fix pending command UAF in EIR updates
- HIDP: reject frames without a transaction header
- HIDP: validate numbered report payloads
- btmtk: Fix short read errors in btmtk_usb_uhw_reg_read()
- btmtk: Fix short read errors in btmtk_usb_reg_read()
- btusb: Fix short read errors in btusb_qca_send_vendor_req()
- btintel: Validate length before parsing diagnostics TLV
* tag 'for-net-2026-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: (31 commits)
Bluetooth: SCO: give the socket its own sco_conn reference
Bluetooth: btusb: Fix short read errors in btusb_qca_send_vendor_req()
Bluetooth: btmtk: Fix short read errors in btmtk_usb_reg_read()
Bluetooth: btmtk: Fix short read errors in btmtk_usb_uhw_reg_read()
Bluetooth: hci_sync: remove unnecessary hci_conn_get in create_conn_sync
Bluetooth: hci_sync: fix hci_conn_del() use in hci_le_create_conn_sync
Bluetooth: hci_sync: hold conn in hci_past_sync() callback
Bluetooth: hci_sync: hold conn in hci_connect_pa_sync() callback
Bluetooth: hci_sync: hold conn in hci_connect_big_sync() callback
Bluetooth: hci_sync: hold conn in hci_connect_acl/le_sync() callbacks
Bluetooth: hci_conn: hold conn reference in abort_conn_sync()
Bluetooth: btintel: Validate length before parsing diagnostics TLV
Bluetooth: ISO: fix race of kfree vs kref_get_unless_zero
Bluetooth: ISO: fix refcounting of iso_conn
Bluetooth: ISO: ensure no dangling hcon references in iso_conn
Bluetooth: ISO: avoid deadlocks in iso_sock_timeout
Bluetooth: ISO: fix leaking sk after socket release
Bluetooth: ISO: hold sk properly in iso_conn_ready
Bluetooth: ISO: validate sockaddr_iso first in iso_sock_rebind_bis()
Bluetooth: ISO: fix timeout vs sync_timeout typo in check_bcast_qos
...
====================
Link: https://patch.msgid.link/20260728201527.2456032-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The same as the rest of the code, get_ss_info_from_atombios() uses
calc_pll_cs->ctx->logger for logging. But calc_pll_cs->ctx is
initialized only later in calc_pll_max_vco_construct(). Therefore, any
output using DC_LOG_SYNC() leads to a NULL pointer deference in
get_ss_info_from_atombios().
According to Sashiko, the very same problem exists in
dce112_get_pix_clk_dividers() and dcn3_get_pix_clk_dividers() too.
To avoid accessing the NULL context, use clk_src->base.ctx->logger
everywhere. That context in base is initialized earlier in
dce110_clk_src_construct() and dce112_clk_src_construct(). Before
get_ss_info_from_atombios() or Sashiko's get_pix_clk_dividers functions
above are actually called. This is done by redefining DC_LOGGER to
CTX->logger.
Before:
dce110_clk_src_construct() did:
-> sets clk_src->base.ctx = ctx;
-> ss_info_from_atombios_create()
-> get_ss_info_from_atombios() <- uses calc_pll_cs->ctx # BOOM
-> calc_pll_max_vco_construct() <- sets calc_pll_cs->ctx
After:
dce110_clk_src_construct() does:
-> sets clk_src->base.ctx = ctx;
-> ss_info_from_atombios_create()
-> get_ss_info_from_atombios() <- uses clk_src->base.ctx
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1271175
Closes: https://lore.kernel.org/all/a9ee54e6-2413-4156-9bde-d528ae3c63a3@kernel.org/
Fixes: 1296423bf2 ("drm/amd/display: define DC_LOGGER for logger")
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Cc: Lakha, Bhawanpreet <Bhawanpreet.Lakha@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <siqueira@igalia.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6f16fcbb0c)
Cc: stable@vger.kernel.org
On APUs, the GTT pool is backed by system RAM, but its size is not bound
to the non-carveout memory that actually backs it. A user can end up
with GTT + VRAM exceeding total physical memory through the following
sequence:
- Have a large non-carveout memory space (~128GB) and accordingly set a
large GTT (~100GB) via the ttm module parameter.
- Lower the non-carveout memory space in BIOS by increasing the UMA
Frame Buffer Size (VRAM) to 64GB.
- The previously set GTT value (~100GB) persists, even though the new
non-carveout space (64GB) can no longer back it.
This leads to a case where kernel reports GTT (100GB) + VRAM (64GB)
despite the sum being greater than total physical memory (128GB).
Cap the GTT size to totalram_pages() on APUs. totalram_pages() already
excludes the VRAM carveout, so the resulting GTT can never exceed the
system RAM that actually backs it.
Signed-off-by: Harkirat Gill <harkirat.gill@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Assisted-by: Claude:claude-opus-4
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5dafdd6492)
Cc: stable@vger.kernel.org
GPU average and input power backends report a mix of whole watts,
milliwatts, Q24.8 watts and decimal-packed fractions. Q24.8 is inherited
from the legacy PowerPlay sensor format. Milliwatts are a more natural unit
for the hwmon and pm_info consumers in amdgpu_pm.c. A common decoder cannot
distinguish these formats, and converting native milliwatts through Q24.8
also loses precision.
Use milliwatts as the internal unit across all PPT and PowerPlay backends.
Decode Q24.8 only at the legacy smu7 input boundary and encode it only for
the raw amdgpu_sensors debugfs interface. This gives hwmon, pm_info and the
sensor ioctl one unambiguous unit while preserving the format used by UMR.
Fixes: 5b79d0482f ("drm/amd/pp: Remove struct pp_gpu_power")
Fixes: 01992b121f ("drm/amd/pm: fix amdgpu_pm_info power display units")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reported-by: Lars Nieradzik <l.nieradzik@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 757ba0790b)
Cc: stable@vger.kernel.org
Runtime suspend runs GFX hw_fini and clears perfmon clock gating while
the UMD profile DPM level remains set in software. Re-apply stable
pstate after a successful runtime resume when a profile mode is active.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 138531c885)
Cc: stable@vger.kernel.org
kfd_criu_checkpoint_events() counts the entries in p->event_idr via
kfd_get_num_events(), allocates an array sized to that count, and then
walks the same IDR to fill it. Neither the count nor the walk holds
p->event_mutex.
The CRIU checkpoint caller holds only p->mutex. Event create and destroy
(kfd_event_create()/kfd_event_destroy()) take p->event_mutex and do not
take p->mutex, so a second thread in the same process can insert or remove
events between the count and the walk. If an event is inserted, the walk
iterates more entries than were counted and writes past the end of the
ev_privs allocation; if an event is removed, the walk dereferences an
entry that is being freed.
Hold p->event_mutex across the count and the walk so both observe a
consistent view of p->event_idr. The lock is released before
copy_to_user(), which only touches the local buffer. The caller already
holds p->mutex and the create/destroy paths never take p->mutex, so the
p->mutex -> p->event_mutex order is not inverted and no deadlock is
introduced.
Fixes: 40e8a766a7 ("drm/amdkfd: CRIU checkpoint and restore events")
Signed-off-by: William Palacek <William.Palacek@amd.com>
Reviewed-by: Alysa Liu <Alysa.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ff57e223ab)
Cc: stable@vger.kernel.org
If a plane reaches calculate_mcache_setting with a zero-area viewport,
calculate_mcache_setting exits early with num_mcaches == 0 and
mvmpg_width/height == 0. This will cause a divide-by-zero panic and can
also cause an underflow on num_mcaches.
Fix this by changing calculate_mcache_setting to bool and adding guards
after each calculate_mcache_row_bytes call. If num_mcaches or
mvmpg_width/height is zero, return a false. Callers will propagate the
failure as a rejected mode, which prevents the panic.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5302
Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 29c0f7c655)
Cc: stable@vger.kernel.org
amdgpu_dpm_get_gpu_metrics() returns a pointer to the shared metrics cache
after dropping adev->pm.mutex. The sysfs path then copies from that pointer.
Another reader can refresh the cache in place during the copy and return a
snapshot containing data from two generations.
Pass caller-provided storage through the DPM interface and copy the metrics
while the mutex is held. This keeps the cache pointer private and makes each
sysfs read observe one complete sample.
Fixes: 25c933b1c4 ("drm/amd/powerplay: add new sysfs interface for retrieving gpu metrics(V2)")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 862333bb48)
Cc: stable@vger.kernel.org
amdgpu_dpm_get_pp_table() returns a pointer to a driver-owned power table
after dropping adev->pm.mutex. The sysfs path then copies from that pointer.
A concurrent pp_table write can replace and free the allocation during the
copy, causing a use-after-free.
Change the DPM interface to copy into caller-provided storage while the mutex
is held. Keep the size-only query for attribute discovery without exposing
the driver-owned pointer.
Fixes: 1684d3ba48 ("drm/amd/amdgpu: change pptable output format from ASCII to binary")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f6eed7acfd)
Cc: stable@vger.kernel.org
eop_ring_buffer_size in struct queue_properties is a u32. In
kfd_queue_acquire_buffers() the expected EOP buffer size is computed as
ALIGN(eop_ring_buffer_size, PAGE_SIZE); ALIGN uses typeof(x), so the
addition is done in 32-bit. A user-supplied size of 0xFFFFF001 wraps to
0, causing kfd_queue_buffer_get() to skip its exact-size check (gated on
size != 0) and accept any BO mapped at the address. On GFX8/GFX9 the MQD
cp_hqd_eop_control is then programmed for an 8KB EOP ring backed by a 4KB
BO, so CP EOP writes can land past the buffer and fault the GPU.
Cast the operand to u64 so the alignment is computed in 64-bit; the size
check in kfd_queue_buffer_get() then rejects the oversized request.
Fixes: 42ea9cf2f1 ("drm/amdkfd: Relax size checking during queue buffer get")
Signed-off-by: William Palacek <William.Palacek@amd.com>
Reviewed-by: Alysa Liu <Alysa.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ae443117b7)
Cc: stable@vger.kernel.org
Prevent unauthorized termination of active GPU debug sessions.
Previously, users with /dev/kfd access could terminate another process's
debug session without proper ownership or ptrace authorization.
Signed-off-by: Gang Ba <Gang.Ba@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4db4c5ffd5)
Cc: stable@vger.kernel.org
The commit referenced below restarts the CS if the validation is
still in progress. When debug_vm is enabled, all BOs from the CS
are invalidated so we will hit an infinite loop.
To avoid that, defer BO invalidation to amdgpu_cs_parser_fini.
Fixes: 59720bfd8c ("drm/amdgpu: restart the CS if some parts of the VM are still invalidated")
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8c990ee9da)
Cc: stable@vger.kernel.org
In kfd_criu_restore_event, there was no handling for
the event priv data having an invalid event type. The priv
data here is untrusted and can be invalid.
In that case, fail with EINVAL.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2e8e9963cd)
Cc: stable@vger.kernel.org
Updates PPSMC_MSGs and set/get functions for gathering GFXOFF logs
on Van Gogh. Logs are now gathered live rather than starting then
stopping logging and reading an average value afterwards. This is
in accordance to changes made in PMFW.
In regards to messageID 0x52, the old interface uses a start/stop
parameter, and the new one doesn't. The firmware is checked to
determine which method to use.
v2: added firmware guard to new interface, old interface kept as
fallback
Signed-off-by: Fares Soliman <Fares.Soliman@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 482e2cadea)
Building for ARCH=um with W=1 C=1 makes the "amd_sriov_msg_vf2pf_info
must be 1 KB" static assertion in amdgv_sriovmsg.h fail under sparse,
exposed after UML builds were enabled.
Sparse does not honor #pragma pack(push, 1) for the nested ucode_info
struct, so it sizes each element as 8 bytes instead of 5 and computes
the surrounding structure as larger than 1 KB. The compilers get this
right via the enclosing pragma, but the annotation should be explicit.
Fixes: af3f2f5db2 ("drm/amdgpu: Remove UML build exclusion from Kconfig")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202607091659.SHEscT0c-lkp@intel.com/
Cc: Harry Wentland <harry.wentland@amd.com>
Assisted-by: Copilot:Claude-Opus-4.8
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1d8cfeb69d)
Building for ARCH=um with W=1 C=1 makes sparse report "incompatible
types in comparison expression (different address spaces)" warnings in
the KFD code, exposed after UML builds were enabled:
- amdgpu_amdkfd_fence.c compares the __rcu-annotated dma_fence.ops
pointer directly in to_amdgpu_amdkfd_fence().
- amdgpu_amdkfd_gpuvm.c compares the __rcu eviction fence pointer
directly in amdgpu_amdkfd_gpuvm_restore_process_bos().
Fixes: af3f2f5db2 ("drm/amdgpu: Remove UML build exclusion from Kconfig")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202607091659.SHEscT0c-lkp@intel.com/
Cc: Harry Wentland <harry.wentland@amd.com>
Assisted-by: Copilot:Claude-Opus-4.8
Signed-off-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 764f241ad2)
When MES is enabled and amdgpu_amdkfd_alloc_kernel_mem() fails during
the first queue creation for a process, pqm_create_queue() returns
early via 'return retval' without going through the err_create_queue
cleanup label.
This means clear_bit(*qid, pqm->queue_slot_bitmap) is never called,
leaving the reserved QID bit permanently set in queue_slot_bitmap.
Over time this leaks QID slots, potentially exhausting all available
queue slots.
Fix this by replacing 'return retval' with 'goto err_allocate_pqn'
so that clear_bit() is always called on the error path without
touching the uninitialized pqn pointer.
AILIKFD-813
Reported-by: Deucher, Alexander <alexander.deucher@amd.com>
Signed-off-by: Vladimir Marioukhine <Vladimir.Marioukhine@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a107f74c38)
Cc: stable@vger.kernel.org
Some HDMI sinks need additional GCP packets to properly process the
mute state before the timing generator is disabled, especially after
link re-establishment with HDMI 2.0 scrambling enabled. Waiting for
only 2 frames is insufficient for certain monitor firmware, resulting
in garbled display output on resume from suspend.
Increase the AV mute wait in dcn30_set_avmute() from 2 to 3 frames
to ensure the sink receives enough GCP packets.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5167
Assisted-by: Cursor:Claude-Opus-4.6
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0c0d5174b0)
Cc: stable@vger.kernel.org
amdgpu_vm_clear_freed() allocates an amdgpu_sync object and walks the VM
reservation fences via amdgpu_sync_resv() before checking whether vm->freed
has anything to clear. Return early when the list is empty to skip this
overhead on a hot path (every GEM close and command submission).
Signed-off-by: Bob Zhou <bobzhou2@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8ba869e852)
The CRAT parser validates that the subtype header fits within the image,
but does not verify that the advertised subtype length fits. A malformed
CRAT table with an oversized length field causes out-of-bounds reads when
kfd_parse_subtype() casts the header to specific subtype structures.
Add validation that sub_type_hdr + length does not exceed the image
boundary before parsing the subtype contents.
Signed-off-by: William Palacek <William.Palacek@amd.com>
Reviewed-by: Alysa Liu <Alysa.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 48e1d1e6e8)
Cc: stable@vger.kernel.org
In i2c_imx_unreg_slave(), the slave pointer is set to NULL after
disabling interrupts. However, a pending interrupt might already
have started the hrtimer (i2c_imx_slave_timeout) before the pointer
was cleared. If the hrtimer fires after i2c_imx->slave is set to
NULL, the timer callback i2c_imx_slave_finish_op() will call
i2c_imx_slave_event() with a NULL slave pointer, which results in a
use-after-free / NULL pointer dereference.
Fix by canceling the hrtimer and waiting for it to complete after
disabling interrupts, before clearing the slave pointer.
Fixes: f7414cd692 ("i2c: imx: support slave mode for imx I2C driver")
Signed-off-by: Liem <liem16213@gmail.com>
Cc: <stable@vger.kernel.org> # v5.11+
Acked-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260629023829.152651-3-liem16213@gmail.com
In i2c_imx_reg_slave(), the slave pointer was assigned before
pm_runtime_resume_and_get(). If pm_runtime_resume_and_get() failed,
the error path returned without clearing i2c_imx->slave, leaving it
non-NULL and causing all subsequent registration attempts to fail
with -EBUSY.
Additionally, because this driver uses a shared IRQ, the interrupt
handler i2c_imx_isr() can execute concurrently and, after acquiring
slave_lock, dereference i2c_imx->slave. The previous fix attempt
added a lockless i2c_imx->slave = NULL on the error path, but that
could race with the ISR under the lock and still cause a NULL pointer
dereference.
Fix both issues by deferring the assignment of i2c_imx->slave and
i2c_imx->last_slave_event to after a successful resume, and by
performing the assignment inside the slave_lock critical section.
This guarantees that the slave pointer is never left stale on the
error path and is always valid when observed by the interrupt handler.
Fixes: f7414cd692 ("i2c: imx: support slave mode for imx I2C driver")
Signed-off-by: Liem <liem16213@gmail.com>
Cc: <stable@vger.kernel.org> # v5.11+
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260629023829.152651-2-liem16213@gmail.com
Pull x86 platform driver fix from Ilpo Järvinen:
- Fix ACPI _DSM function index and bitmask usage for Dell DW5826e
* tag 'platform-drivers-x86-v7.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: dell-dw5826e: fix ACPI _DSM function index and bitmask usage
If a transaction times out, the START_BUSY signal can stay up, and
subsequent transactaction attempts will fail as the bus is still
considered busy.
I can easily trigger this by attempting to read from an address with no
device, e.g. when running i2cdetect. After the first read times out, all
subsequent read attempts return busy.
To get to a working state again, the controller needs to be reset to
clear the START_BUSY signal. So check for START_BUSY still asserted on a
timeout, and do reset in case it is,
This is also done by the original non-upstream iproc-smbus driver
implementation [1].
Works around situations like:
bcm-iproc-2c 1803b000.i2c: transaction timed out
bcm-iproc-2c 1803b000.i2c: bus is busy
bcm-iproc-2c 1803b000.i2c: bus is busy
bcm-iproc-2c 1803b000.i2c: bus is busy
bcm-iproc-2c 1803b000.i2c: bus is busy
bcm-iproc-2c 1803b000.i2c: bus is busy
...
where the bus never recovers after a timeout.
[1] https://github.com/opencomputeproject/onie/blob/master/patches/kernel/3.2.69/driver-iproc-smbus.patch
Fixes: e6e5dd3566 ("i2c: iproc: Add Broadcom iProc I2C Driver")
Signed-off-by: Jonas Gorski <jonas.gorski@bisdn.de>
Cc: <stable@vger.kernel.org> # v4.0+
Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260717085507.34209-1-jonas.gorski@bisdn.de
sco_conn_del() drops a reference it does not own. It takes one transient
reference via sco_conn_hold_unless_zero() and releases it with the
sco_conn_put() that follows sco_sock_hold(); the additional put in the
!sk branch releases a second one:
conn = sco_conn_hold_unless_zero(conn);
...
sk = sco_sock_hold(conn);
sco_conn_unlock(conn);
sco_conn_put(conn);
if (!sk) {
sco_conn_put(conn);
return;
}
When close() races the controller's Disconnection Complete, sco_chan_del()
clears conn->sk and drops the socket's reference while sco_conn_del() is
running. sco_conn_del() then sees sk == NULL, its own put drops the count
to zero and frees the conn, and the second put writes to the freed kref:
BUG: KASAN: slab-use-after-free in sco_conn_put.part.0+0x1a/0x190
Write of size 4 at addr ffff8881099dec74 by task kworker/u17:3/413
Workqueue: hci1 hci_rx_work
Call Trace:
sco_conn_put.part.0+0x1a/0x190
hci_disconn_complete_evt+0x1ee/0x3e0
hci_event_packet+0x54a/0x650
hci_rx_work+0x321/0x3d0
Allocated by task 413:
sco_conn_add+0x72/0x1a0
sco_connect_cfm+0x88/0x670
Freed by task 413:
sco_conn_del.isra.0+0x3f/0xf0
hci_disconn_complete_evt+0x1ee/0x3e0
refcount_t: underflow; use-after-free.
The root cause is that the socket stores the connection without holding a
reference of its own. __sco_chan_add() does:
sco_pi(sk)->conn = conn;
so the socket borrows whatever reference its caller happened to hold, and
the callers paper over that with ad-hoc holds and puts. Give the socket a
counted reference instead: __sco_chan_add() takes one and it is released
together with the channel (sco_chan_del()) and in sco_sock_destruct().
With the socket holding its own reference, sco_conn_del() no longer needs
the extra put and the redundant hold in sco_conn_ready() goes away.
Making the socket own its reference means the connection is now actually
freed on the error paths of sco_connect() where it used to leak, which in
turn runs sco_conn_free() and its hci_conn_drop(conn->hcon). To keep the
hci_conn accounting balanced, make that ownership explicit as well:
sco_conn_add() consumes one hci_conn reference and the sco_conn owns it for
its lifetime. sco_connect() hands over the reference returned by
hci_connect_sco() and no longer drops it on the error paths;
sco_connect_cfm(), which is not given a reference, takes one with
hci_conn_hold() before handing it to sco_conn_add() (and drops it again if
the allocation fails); and the explicit hci_conn_hold() in sco_conn_ready()
is removed. Every reference then has a single, clear owner.
Fixes: e6720779ae ("Bluetooth: SCO: Use kref to track lifetime of sco_conn")
Cc: stable@vger.kernel.org
Suggested-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Aldo Ariel Panzardo <qwe.aldo@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If btusb_qca_send_vendor_req() gets a "short" read from a device, it
will accidentally treat that as a "real" read and populate the returned
value with some unknown and probably totally invalid data.
Fix this logic error up by calling usb_control_msg_recv() which
guarantees a "full" read happens, and then simplify the error checking
for when btusb_qca_send_vendor_req() is called.
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If btmtk_usb_reg_read() gets a "short" read from a device, it will
accidentally treat that as a "real" read and populate the returned value
with some unknown and probably totally invalid data.
Fix this logic error up by calling usb_control_msg_recv() which
guarantees a "full" read happens, and then simplify the error checking
for when btmtk_usb_reg_read() is called (it's really just
btmtk_usb_id_get() that calls btmtk_usb_reg_read(), so fix up those
return sites.
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If btmtk_usb_uhw_reg_read() gets a "short" read from a device, it will
accidentally treat that as a "real" read and populate the returned value
with some unknown and probably totally invalid data.
Fix this logic error up by calling usb_control_msg_recv() which
guarantees a "full" read happens, and then simplify the error checking
for when btmtk_usb_uhw_reg_read() is called.
Note, one caller of btmtk_usb_uhw_reg_read() does not check the return
value, but as we pre-initialize the return value as 0, an incorrect read
will not do anything wrong.
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_conn_get() without already held reference is data race against
concurrent deletion.
In previous patches, the refcount has been changed to be taken before
starting the hci_sync task, so remove these extra get() + put() as they
are not needed.
Fixes: 12917f591c ("Bluetooth: hci_conn: Fix null ptr deref in hci_abort_conn()")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_conn_del() caller must hold hdev->lock, check the conn was not
concurrently deleted, and usually inform socket the conn is going to be
deleted.
Use hci_abort_conn_sync() instead of calling hci_conn_del() without
locks etc.
Fixes: 8e8b92ee60 ("Bluetooth: hci_sync: Add hci_le_create_conn_sync")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Avoids giving freed pointers to hci_conn_valid(), which kmalloc may have
reused.
Hold refcount to avoid that.
Fixes: d3413703d5 ("Bluetooth: ISO: Add support to bind to trigger PAST")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There is theoretical UAF if the conn is freed while the hci_sync task is
running.
Hold refcount to avoid that.
Fixes: 6d0417e4e1 ("Bluetooth: hci_conn: Fix not setting conn_timeout for Broadcast Receiver")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There is theoretical UAF if the conn is freed while the hci_sync task is
running.
Hold refcount to avoid that. Handle NULL hcon, return 0 + do nothing to
match the previous behavior.
Fixes: 024421cf39 ("Bluetooth: hci_conn: Fix not setting timeout for BIG Create Sync")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There is theoretical UAF if the conn is freed while the hci_sync task
is running.
Hold refcount to avoid that.
Fixes: 881559af5f ("Bluetooth: hci_sync: Attempt to dequeue connection attempt")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There is theoretical UAF if the conn is freed while the hci_sync task is
running.
Hold refcount to avoid that.
Fixes: 227a0cdf4a ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
btintel_diagnostics() accesses tlv->val[0] without first validating
that the diagnostics VSE is long enough to contain that field, so
may cause reading data beyond the received frame.
Fix by validating the length before access.
Fixes: af395330ab ("Bluetooth: btintel: Add Intel devcoredump support")
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_conn::iso_data is accessed and modified without lock or RCU.
This leads to a race
[Task hdev->workqueue] [Task 2]
iso_recv iso_conn_put(conn)
conn = LOAD hcon->iso_data iso_conn_free(conn)
iso_conn_hold_unless_zero(conn) hcon->iso_data = NULL
kfree(conn)
kref_get_unless_zero(&conn->ref) /* UAF */
and also to races in iso_conn_add() vs. iso_conn_free().
Fix by adding spinlock hci_conn::proto_lock and using it to guard
hci_conn::iso_data.
Fixes: dc26097bdb ("Bluetooth: ISO: Use kref to track lifetime of iso_conn")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
iso_conn_del() and iso_chan_del() have a race that results to double-put
of iso_conn:
[Task hdev->workqueue] [Task 2]
iso_conn_del iso_chan_del
iso_conn_hold_unless_zero iso_conn_lock
iso_conn_lock conn->sk = NULL
iso_conn_unlock
sk = iso_sock_hold(conn) <---------´
if (!sk) iso_conn_put iso_conn_put
iso_conn_put /* UAF */
The extra put for !sk in iso_conn_del() is currently required since
failing iso_chan_add() may leave iso_conn not associated with any sk.
Fix by having iso_pi(sk)->conn own refcount when non-NULL, so
iso_conn_del does not need to put it. Adjust the iso_conn_add()
refcounting so that conn is put if it does not get associated with an
sk.
Fixes: dc26097bdb ("Bluetooth: ISO: Use kref to track lifetime of iso_conn")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
After iso_conn_del(), ISO sockets should not dereference the hcon any
more. Currently, clearing iso_conn::hcon relies on iso_conn_del()
releasing the last reference to the iso_conn.
Simplify this by explicitly clearing conn->hcon in iso_conn_del(), to
avoid more complex reasoning on races about who holds the last
reference.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
iso_sock_timeout() takes lock_sock, so sync disabling the timer while
holding that lock may deadlock.
iso_sock_timeout() may also run concurrently with iso_conn_del(), which
leads to UAF
[Task 1] [Task hdev->workqueue]
iso_sock_timeout iso_conn_del
iso_conn_hold_unless_zero iso_chan_del
`------------> iso_conn_put
caller frees hcon
iso_conn_put
iso_conn_free
conn->hcon->iso_data = NULL; /* UAF */
Fix the deadlock by removing the disable from the lock_sock sections.
Move the timer from iso_conn to iso_pinfo to decouple it from iso_conn
which may need to be freed in lock_sock section. Convert some of the
clear_timer to disable_timer.
Fixes: dc26097bdb ("Bluetooth: ISO: Use kref to track lifetime of iso_conn")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
iso_sock_kill() tests !sock_flag(sk, SOCK_ZAPPED) || sk->sk_socket ||
sock_flag(sk, SOCK_DEAD) for early return, but this is always true since
sock_orphan(sk) sets SOCK_DEAD, so the sk reference released by socket
always leaks, iso_sock_destruct is never called.
The socket reference also leaks when __iso_sock_close() does not set
SOCK_ZAPPED, since iso_conn_del() does not call iso_sock_kill() after
zapping.
Fix by replacing SOCK_DEAD by BT_SK_KILLED flag that is not used for
something else, and lock_sock to ensure iso_sock_kill() puts sk only
after socket release only once. Release and iso_conn_del may run
concurrently. Call iso_sock_kill() from iso_conn_del() to clean sk up
after zapping.
Remove call to iso_sock_kill() from iso_sock_close(), as it's generally
no-op there.
Fixes: ccf74f2390 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
sk deref in iso_conn_ready must be done either under conn->lock, or
holding a refcount, to avoid concurrent close. conn->sk is currently
accessed without either:
[Task 1] [Task 2]
iso_sock_release
iso_conn_ready
sk = conn->sk
lock_sock(sk)
conn->sk = NULL
lock_sock(sk)
release_sock(sk)
iso_sock_kill(sk)
UAF on sk deref
Fix possible UAF by holding sk refcount in iso_conn_ready(). Also
recheck after lock_sock that the socket is still valid. Adjust locking
so conn->sk is cleared only under lock_sock.
Fixes: 27c24fda62 ("Bluetooth: switch to lock_sock in SCO")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
iso_sock_rebind_bis() updates socket iso_pi(sk)->bc_num_bis before
validating the BIS values, so it's possible to end up with bc_num_bis
inconsistent.
Assign to iso_pi(sk)->bc_num_bis only after validation.
Fixes: 80837140c1 ("Bluetooth: ISO: Allow binding a PA sync socket")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In iso.c check_bcast_qos(), missing bcast.timeout is not set to its
default value, and appears typoed as bcast.sync_timeout.
Fix the typo.
Fixes: b37cab587a ("Bluetooth: ISO: Don't reject BT_ISO_QOS if parameters are unset")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Accessing iso_pi(sk)->conn requires lock_sock, which is not taken in the
"ev3" part of iso_connect_ind. It may also be NULL if socket has
transitioned away from the LISTEN/CONNECT states before locking.
Fix by adding lock/release. Recheck hcon is valid after lock acquire
where needed.
Fixes: 168d9bf9c7 ("Bluetooth: ISO: Reassemble PA data for bcast sink")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Accessing iso_pi(sk)->conn requires lock_sock, which is not held here.
Fix by adding the lock/release.
Fixes: 2df108c227 ("Bluetooth: ISO: Fix using BT_SK_PA_SYNC to detect BIS sockets")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Commit d57e506f6a ("Bluetooth: ISO: clear iso_data always when detaching conn from hcon")
merged a version of the UAF fix that breaks releasing connected
ISO sockets. Since hci_conn::iso_data is set to NULL, iso_chan_del() won't
be called when the hci_conn disconnects, and the ISO socket does not emit
POLLHUP correctly.
Fix by retaining full hci_conn <-> iso_conn association while in
BT_DISCONNECT state, so that local disconnect via shutdown() follows
similar ISO socket code path as remote disconnect. Use a separate flag
to track whether hci_conn_drop() is needed, instead of setting
iso_conn::hcon = NULL
In iso_sock_ready(), disallow disconnecting socket going BT_CONNECTED,
in case hcon connects while its drop is pending.
Fixes: d57e506f6a ("Bluetooth: ISO: clear iso_data always when detaching conn from hcon")
Fixes: fbdc4bc472 ("Bluetooth: ISO: Use defer setup to separate PA sync and BIG sync")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_find_adv_instance() returns an adv_info pointer that is valid only
while hdev->lock is held. The advertising command-sync paths perform
instance lookups without that lock and, in some cases, retain the pointer
while waiting for a controller response.
An advertising termination event can therefore interleave as follows:
hci_cmd_sync_work hci_rx_work
hci_find_adv_instance()
__hci_cmd_sync_status()
wait for controller reply hci_dev_lock()
hci_remove_adv_instance()
kfree(adv)
adv->scan_rsp_changed = false
KASAN reported:
BUG: KASAN: slab-use-after-free in hci_set_ext_scan_rsp_data_sync+0x2e1/0x300
Write of size 1 at addr ffff88810a45d21d by task kworker/u17:0/88
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
hci_set_ext_scan_rsp_data_sync+0x2e1/0x300
hci_schedule_adv_instance_sync+0x390/0x4c0
hci_cmd_sync_work+0x173/0x300
Allocated by task 87:
hci_add_adv_instance+0x538/0xac0
add_advertising+0x885/0x1160
Freed by task 89:
kfree+0x131/0x3c0
hci_remove_adv_instance+0x1d8/0x3b0
hci_le_ext_adv_term_evt+0x17b/0x730
Protect the instance lookup and payload construction in the extended
advertising, scan response, and periodic advertising data paths. Snapshot
the advertising parameters under hdev->lock, but release the lock before
waiting for the controller.
Clear advertising-data dirty bits before issuing their commands and
restore them after a failure using a fresh lookup. Likewise, update the
reported transmit power through a fresh lookup after the parameter command
completes. No adv_info pointer then survives an HCI command wait.
Fixes: cba6b75871 ("Bluetooth: hci_sync: Make use of hci_cmd_sync_queue set 2")
Cc: stable@vger.kernel.org
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
rfcomm_recv_frame() casts skb->data to struct rfcomm_hdr and dereferences
hdr->addr and hdr->ctrl without validating skb->len first. A truncated
frame with skb->len less than the minimum header size causes an
out-of-bounds read of uninitialized memory. Additionally, a zero-length
frame causes skb->len-- to underflow to UINT_MAX, making
skb_tail_pointer() read far past the buffer.
Commit 23882b828c ("Bluetooth: RFCOMM: validate skb length in MCC
handlers") fixed the same class of missing-length-check bugs in the MCC
sub-handlers, but the top-level rfcomm_recv_frame() was left unfixed.
KMSAN reports:
BUG: KMSAN: uninit-value in rfcomm_run
...
Uninit was created at:
__alloc_skb+0x474/0xb60
vhci_write+0xe9/0x870
Fix this by rejecting frames smaller than sizeof(struct rfcomm_hdr) + 1
(the minimum frame must have a 3-byte header and a 1-byte FCS).
Signed-off-by: Jiale Yao <yaojiale02@163.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_le_connect_rsp() obtains a channel via
__l2cap_get_chan_by_ident() but neither holds a reference nor uses
l2cap_chan_hold_unless_zero() before locking and operating on it.
A concurrent l2cap_chan_del() triggered by a remote disconnect can
free the channel between the lookup and l2cap_chan_lock(), causing
a use-after-free.
The BR/EDR counterpart l2cap_connect_rsp() and the sibling handler
l2cap_le_command_rej() already use l2cap_chan_hold_unless_zero()
to safely hold a reference, but l2cap_le_connect_rsp() was left
unprotected.
Fix by adding l2cap_chan_hold_unless_zero() after the ident lookup
and l2cap_chan_put() on the exit path, consistent with other L2CAP
response handlers.
Fixes: f1496dee9c ("Bluetooth: Add initial code for LE L2CAP Connect Request")
Assisted-by: Claude:deepseek-v4-pro
Signed-off-by: Jiale Yao <yaojiale02@163.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When hidp_get_raw_report() waits for a numbered report,
hidp_process_data() compares the expected report number with skb->data[0].
A connected HIDP peer can reply with only a DATA transaction header,
leaving the skb empty after the header is removed.
KMSAN reports an uninitialized-value use in hidp_session_run(), with the
value originating in __alloc_skb() through vhci_write(). The transaction
header checks remove the empty-frame reports, but this report remains until
the payload check is added.
The comparison can also consume a peer-controlled byte beyond the declared
L2CAP PDU. A DATA | FEATURE response followed by an extra 0x01 byte made
the current code accept that byte as report ID 1 and complete
HIDIOCGFEATURE with a zero-byte result. With this change the malformed
response is rejected with -EIO, while a subsequent valid response still
succeeds.
Require a payload byte before comparing a numbered report ID. Unnumbered
reports continue to accept an empty payload.
Fixes: 0ff1731a1a ("HID: bt: Add support for hidraw HIDIOCGFEATURE and HIDIOCSFEATURE")
Cc: stable@vger.kernel.org
Signed-off-by: Sangho Lee <kudo3228@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hidp_recv_ctrl_frame() and hidp_recv_intr_frame() read skb->data[0]
before checking that the L2CAP SDU contains a transaction header. A
connected HIDP peer can send an empty basic-mode SDU and make both paths
use an uninitialized byte from skb tailroom.
KMSAN reports the use in hidp_session_run(), with the uninitialized value
originating in __alloc_skb() through vhci_write(). The control path
produces two reports and the interrupt path produces one.
The byte can also be controlled by a malformed lower-layer packet. If an
HCI ACL packet contains an L2CAP PDU with a declared zero-length payload
followed by an extra 0x15 byte, l2cap_recv_acldata() reduces skb->len to
the declared PDU length before dispatch. The current HIDP path nevertheless
consumes the extra byte as HIDP_TRANS_HID_CONTROL |
HIDP_CTRL_VIRTUAL_CABLE_UNPLUG and terminates the HIDP session. With this
change, the same packet is discarded and a subsequent feature report
request succeeds.
Pull the transaction header with skb_pull_data() and discard frames that
do not contain it.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Sangho Lee <kudo3228@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
MGMT_OP_SET_LOCAL_NAME is handled asynchronously on powered controllers
and can run set_name_sync(). When the controller is BR/EDR capable,
set_name_sync() updates the local name and then rebuilds EIR data through
eir_create(). The EIR builder walks hdev->uuids, but the UUID list can
be changed and entries can be freed by MGMT_OP_ADD_UUID and
MGMT_OP_REMOVE_UUID.
pending_eir_or_class() is meant to serialize management commands that
can change EIR or the class of device, but it did not include
MGMT_OP_SET_LOCAL_NAME. In addition, it walked hdev->mgmt_pending
without hdev->mgmt_pending_lock even though pending commands are added
and removed under that mutex. A racing command completion can therefore
remove and free a pending command while pending_eir_or_class() is still
inspecting it, leading to a use-after-free in the pending-command list or
allowing a local name update to rebuild EIR while UUID entries are being
removed.
Take hdev->mgmt_pending_lock while scanning hdev->mgmt_pending and treat
MGMT_OP_SET_LOCAL_NAME as an EIR/class-affecting pending command on the
powered asynchronous path. Check for a conflicting pending command before
copying the new short name so a rejected SET_LOCAL_NAME request does not
modify hdev->short_name.
Fixes: 6fe26f694c ("Bluetooth: MGMT: Protect mgmt_pending list with its own lock")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Assisted-by: Codex:gpt-5.4
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Signed-off-by: Ren Wei <enjou1224z@gmail.com>
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The pairing completion and authentication failure callbacks look up the
pending MGMT_OP_PAIR_DEVICE command by walking hdev->mgmt_pending. The
lookup returned a command that was still linked on the shared pending list,
without keeping mgmt_pending_lock held for the later dereference and
removal.
A concurrent MGMT_OP_CANCEL_PAIR_DEVICE request can remove and free the
same pending command before the callback uses it. The reverse race is also
possible when cancel_pair_device() gets a command from pending_find() and a
callback removes it before the cancel path dereferences it. This can lead
to a use-after-free and a second list_del().
Make the pairing lookup helpers transfer ownership of the pending command
by removing it from hdev->mgmt_pending while holding mgmt_pending_lock.
The callbacks and cancel path then complete the command and free it
directly, so racing paths cannot find or free the same command again. Take
a temporary hci_conn reference in cancel_pair_device() because the command
completion drops the reference stored in the pending command.
Fixes: e9a416b5ce ("Bluetooth: Add mgmt_pair_device command")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Assisted-by: Codex:gpt-5.4
Signed-off-by: Zihan Xi <xizh2024@lzu.edu.cn>
Reviewed-by: Ren Wei <enjou1224z@gmail.com>
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When setting conn->hcon = NULL, also conn->hcon->iso_data = NULL is
necessary, otherwise later iso_conn_free() will UAF.
Fix clearing of iso_data in iso_sock_disconn()
Fixes KASAN: slab-use-after-free in iso_conn_hold_unless_zero on
iso_sock_release() followed by hci_abort_conn_sync().
Fixes: fbdc4bc472 ("Bluetooth: ISO: Use defer setup to separate PA sync and BIG sync")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In the e1000_probe() path, e1000_sw_init() allocates adapter->tx_ring and
adapter->rx_ring. If the subsequent CE4100-specific MDIO BAR mapping
fails, the error handling jumps past the ring cleanup code, leaking both
allocations.
Fix this leak by moving the err_mdio_ioremap label above the ring
deallocation logic. This guarantees the proper release of these resources
and prevents the memory leak.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc6.
An x86_64 allyesconfig build showed no new warnings. As we do not have a
CE4100 reference platform to test with, no runtime testing was able to
be performed.
Fixes: 5377a4160b ("e1000: Add support for the CE4100 reference platform")
Cc: stable@vger.kernel.org
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
If an error is encountered while mapping TX buffers, the driver should
unmap any buffers already mapped for that skb.
Because count is incremented before each frag mapping, it will always
match the correct number of unmappings needed when dma_error is reached.
Decrementing count before the while loop in dma_error causes an
off-by-one error. If any mapping was successful before an unsuccessful
mapping, exactly one DMA mapping (the head) would leak.
This bug was introduced by a 2010 fix for an endless loop in dma_error.
All other affected drivers have already been fixed.
Fixes: c1fa347f20 ("e1000/e1000e/igb/igbvf/ixgb/ixgbe: Fix tests of unsigned in *_tx_map()")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-4-7-opus
Signed-off-by: Matt Vollrath <tactii@gmail.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When an AF_XDP zero-copy application is killed abruptly, the XSK pool is
torn down but NAPI keeps polling. igc_clean_rx_irq_zc() then returns the
full budget on every poll, so napi_complete_done() never clears
NAPI_STATE_SCHED.
igc_down() calls napi_synchronize() before napi_disable(), so it spins
forever waiting for that bit and the interface never goes down. Drop the
napi_synchronize() and let napi_disable() do the job -- it sets
NAPI_STATE_DISABLE, which forces the stuck poll to complete. Reorder it
ahead of igc_set_queue_napi() so the NAPI mapping is cleared only after
polling has stopped, matching the recent igb fix b1e0672403.
Fixes: fc9df2a0b5 ("igc: Enable RX via AF_XDP zero-copy")
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Tested-by: Moriya Kadosh <moriyax.kadosh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
During reset recovery, the admin queue returns EBUSY which is expected
behavior. However, the DPLL subsystem was logging these as errors and
incrementing the error counter, potentially leading to unnecessary
warnings and even disabling the DPLL periodic worker if the threshold
was reached.
Suppress error logging and error counter increments when the admin
queue returns EBUSY, as this is expected during reset recovery and
not a real failure condition.
test case:
- ethtool --reset eth3 irq-shared dma-shared filter-shared offload-shared
mac-shared phy-shared ram-shared
- observe if dmesg EBUSY errors are gone
Fixes: d7999f5ea6 ("ice: implement dpll interface to control cgu")
Signed-off-by: Przemyslaw Korba <przemyslaw.korba@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ice_lbtest_prepare_rings() frees Rx rings only when
ice_vsi_start_all_rx_rings() fails. If ice_vsi_setup_rx_rings() fails
after allocating some descriptors, or if ice_vsi_cfg_lan() fails after
the Rx rings were prepared, the function reaches the Tx cleanup path
without releasing the initialized Rx resources.
Fix this by adding separate unwind paths for Rx setup failure and LAN
configuration failure. The Rx setup failure path releases the partially
prepared Rx rings before freeing Tx rings, while later failures first
undo the LAN Tx configuration and then release the Rx rings in reverse
setup order.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc7.
An x86_64 allyesconfig build showed no new warnings. As we do not have an
Intel E800 Series adapter available to run the ethtool offline loopback
selftest, no runtime testing was able to be performed.
Fixes: 0e674aeb0b ("ice: Add handler for ethtool selftest")
Cc: stable@vger.kernel.org
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When a virtual function sends an IRQ map command, the PF will set up
interrupts according to that request. However, because these interrupts are
never reset, the next time Virtual Function initializes, the interrupts are
still enabled for a given VF, which leads to performance degradation in
certain cases due to interrupts being unexpectedly enabled and thus causing
interrupt floods.
Cc: stable@vger.kernel.org
Fixes: 1071a8358a ("ice: Implement virtchnl commands for AVF support")
Suggested-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Patryk Holda <patryk.holda@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ice_resume() schedules an asynchronous PF reset and returns
immediately. The reset runs later in ice_service_task(). If
userspace tries to bring up the net device before the reset
finishes, ice_open() fails with -EBUSY:
ice_resume()
ice_schedule_reset() # sets ICE_PFR_REQ, returns
...
ice_open()
ice_is_reset_in_progress() # ICE_PFR_REQ still set, -EBUSY
...
ice_service_task()
ice_do_reset()
ice_rebuild() # clears ICE_PFR_REQ, too late
Reproduced on E800 series NICs during suspend/resume with irdma
enabled, where the aux device probe widens the race window.
ice 0000:81:00.0: can't open net device while reset is in progress
Add a best-effort wait (10s timeout, matching ice_devlink_info_get())
for the reset to complete before returning from ice_resume(). In
practice the reset completes in ~300ms.
Fixes: 769c500dcc ("ice: Add advanced power mgmt for WoL")
Cc: stable@vger.kernel.org
Reviewed-by: Kohei Enju <kohei@enjuk.jp>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Tested-by: Alexander Nowlin <alexander.nowlin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
idpf_mb_intr_req_irq() allocates the mailbox IRQ name before calling
request_irq(). On success, the name is released later through
kfree(free_irq()), but request_irq() failure returns without freeing it.
Free the allocated name on the request_irq() failure path.
Fixes: 4930fbf419 ("idpf: add core init and interrupt request")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Set the TxQ ring count minimum to 128 descriptors. Any lower than this,
and the queue will stall and trigger Tx timeouts in flow based
scheduling mode. This is because next_to_clean might never be updated.
In flow based scheduling mode, next_to_clean is only updated after a
descriptor completion is processed, i.e. after the RE bit is set in the
last descriptor of a Tx packet. This will never happen with a ring size
of 64 and an IDPF_TX_SPLITQ_RE_MIN_GAP of 64. No matter what the value
of last_re is initialized/set to, the calculated gap will be at most 63
and never trigger the RE bit.
Even a ring size of 96 does not solve this. Because of how infrequent
next_to_clean is updated and how small the ring is, IDPF_DESC_UNUSED
will be much smaller on average. This increases the chance the queue
will be stopped because a multi-descriptor packet, e.g. a large LSO
packet, does not see enough resources on the ring. In this case, the
queue will trigger the stop logic. The queue permanently stalls because
there is no chance for a descriptor completion to update next_to_clean
since it is dependent on a packet being sent.
Fixes: 5f417d5513 ("idpf: replace flow scheduling buffer ring with buffer pool")
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
idpf_get_reg_intr_vecs() fills the caller-allocated reg_vals[] array from
the VIRTCHNL2_OP_ALLOC_VECTORS reply in adapter->req_vec_chunks, bounding
its inner loop only by the per-chunk num_vectors. The array is sized
separately: idpf_intr_reg_init() allocates
kzalloc_objs(struct idpf_vec_regs, total_vecs) from
caps.num_allocated_vectors and only checks the returned count after the
fill. The sum of per-chunk num_vectors is never reconciled against
total_vecs, so a reply with a small num_allocated_vectors but chunks
summing higher writes past the end of reg_vals[].
Impact: a control plane (a PF or hypervisor device model) that returns a
VIRTCHNL2_OP_ALLOC_VECTORS reply whose per-chunk num_vectors sum exceeds
num_allocated_vectors writes struct idpf_vec_regs entries past the end of
the reg_vals kmalloc allocation (KASAN slab-out-of-bounds write).
Bound the fill loop to the array capacity passed in by the callers,
mirroring the sibling idpf_vport_get_q_reg(). The existing
num_regs < num_vecs check then rejects an undersized reply without the
out-of-bounds write happening first.
Fixes: d4d5587182 ("idpf: initialize interrupts and enable vport")
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
qcom_spi_send_cmdaddr() programs NAND_FLASH_CMD/NAND_EXEC_CMD and submits
the descriptors, which makes the controller execute the command
immediately. For SPINAND_SET_FEATURE the value to be written is only
placed into NAND_FLASH_FEATURES afterwards, by qcom_spi_io_op(), in a
second submission - so the chip is programmed with whatever that register
happened to hold from a previous operation, and the intended value is only
applied by the *next* SET_FEATURE.
Measured on a TP-Link Archer AX55 v1 (IPQ5018, ESMT F50L1G41LB): writing
0x40 to the configuration register (0xb0) leaves the chip at 0x00, and the
subsequent write of 0x00 leaves it at 0x40 - every write lands one
operation late.
This stayed unnoticed until v6.18 added SPI-NAND OTP support together
with OTP entries for ESMT chips. spinand_otp_rw() enables OTP mode,
reads, and disables it again, and mtd_otp_nvmem_add() does this during
MTD registration. With the off-by-one, the "disable" write actually
applies the previously requested value, so CFG_OTP_ENABLE ends up set:
the chip stays in OTP mode, every subsequent array read returns the OTP
area instead of the array (UBI reports an empty device) and all writes
fail with -EIO because the OTP area is write protected. On this board
that makes the whole flash unusable and the device unbootable.
Write the feature value into NAND_FLASH_FEATURES as part of the same
transaction, before NAND_EXEC_CMD. While at it, copy only the bytes the
operation actually carries - the previous code dereferenced a 4-byte
pointer on a one-byte buffer (spinand->scratchbuf).
With this patch the flash contents read back bit-identical to a
known-good dump of the same board taken under the vendor firmware
(md5-verified across partitions), and writes work.
Fixes: 7304d19090 ("spi: spi-qpic: add driver for QCOM SPI NAND flash Interface")
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Pal <kuncy7@gmail.com>
Reviewed-by: Md Sadre Alam <md.alam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260727163216.109938-1-kuncy7@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
commit 610fa91d98 ("PCI: imx6: Assert PERST# before enabling regulators")
introduced a boot hang on i.MX6Q/DL variants by reordering
imx_pcie_host_init() to call imx6q_pcie_enable_ref_clk() (which powered up
the PHY) before imx6q_pcie_core_reset() (which powered it back down).
Before 610fa91d98, the sequence was:
1. imx_pcie_assert_core_reset() - power down PHY (set TEST_PD), set
REF_CLK_EN
2. imx_pcie_clk_enable() - power up PHY (clear TEST_PD), set REF_CLK_EN
3. Link training starts with PHY powered up (TEST_PD cleared)
4. Link training succeeds
After 610fa91d98, the sequence became:
1. imx_pcie_clk_enable() - power up PHY (clear TEST_PD), set REF_CLK_EN
2. imx_pcie_assert_core_reset() - power down PHY (set TEST_PD), set
REF_CLK_EN
3. imx_pcie_deassert_core_reset() - does nothing
4. Link training starts with PHY powered down (TEST_PD set)
5. Link training fails and boot hangs when PHY register accesses hang
To fix this:
- Remove TEST_PD PHY power control from imx6q_pcie_enable_ref_clk()
- Remove REF_CLK_EN control from imx6q_pcie_core_reset()
- Add TEST_PD PHY power control to imx6qp_pcie_core_reset(), which
previously relied on imx6q_pcie_enable_ref_clk() to power up the PHY by
clearing TEST_PD
- Clear TEST_PD to power on PHY in imx_pcie_deassert_core_reset()
These changes together ensure the correct sequence:
1. REF_CLK_EN set in clk_enable() (TEST_PD untouched)
2. TEST_PD set in assert_core_reset() (PHY power off)
3. TEST_PD cleared in deassert_core_reset() (PHY power on)
4. Link training starts with proper PHY state
The i.MX6Q/DL PCIe PHY requires approximately 120us between TEST_PD
de-assertion and link training start. Add usleep_range(200, 500) in
imx6q_pcie_core_reset() after clearing TEST_PD to satisfy this requirement.
Add explicit imx_pcie_assert_core_reset() calls in error paths and
host_exit() to ensure no power leak.
Fixes: 610fa91d98 ("PCI: imx6: Assert PERST# before enabling regulators")
Reported-by: Leonardo Costa <leoreis.costa@gmail.com>
Closes: https://lore.kernel.org/lkml/20260629143439.361560-1-leoreis.costa@gmail.com/
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Leonardo Costa <leonardo.costa@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260728035159.2702021-1-hongxing.zhu@oss.nxp.com
Add USB mixer mapping quirk for later revisions of the Corsair Virtuoso
headset with USB IDs 0x1b1c:0x0a43 (wired) and 0x1b1c:0x0a44
(wireless). These devices exhibit the same mixer label collision as
earlier Virtuoso variants: all controls are labelled "Headset", causing
applications like PulseAudio to move the sidetone control instead of
the main playback volume.
Signed-off-by: Robert Abrahamse <denobyte2@gmail.com>
Link: https://patch.msgid.link/20260728140314.11601-1-denobyte2@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_drain() on a linked stream parks an on-stack wait entry on the
drained peer's runtime->sleep, and after schedule_timeout() removes it
only if that peer is still found in the caller's group. If group
membership changes during the wait and the sleep ends by signal or
timeout (so autoremove_wake_function() does not run), finish_wait() is
skipped and snd_pcm_drain() returns with the entry still queued on that
stream's sleep list; a later wake_up() then walks a freed stack frame.
This is reachable by unlinking either the drained or the draining stream.
Unlike the close path (snd_pcm_drop() -> snd_pcm_post_stop()),
snd_pcm_unlink() never wakes the sleep queues. Wake every group member
under the group lock before the membership change, so a linked drainer is
released and drops its entry while the streams are still grouped.
The window was opened when snd_pcm_link_rwsem stopped being held across
the wait and the removal became conditional on group membership (see
Fixes). The later switch to finish_wait() kept that conditional removal,
so the signal/timeout case remained.
Fixes: f57f3df03a ("ALSA: pcm: More fine-grained PCM link locking")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-5
Signed-off-by: Norbert Szetei <norbert@doyensec.com>
Link: https://patch.msgid.link/A0705100-D10B-4286-9980-0142ABEEAD51@doyensec.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
mmu_try_to_unsync_pages() skips the shadow-page lookup when the
supplied memslot allows a hugepage, because a shadow page would disallow
hugepages. But hugepage metadata is per-address-space while shadow pages
are shared across all address spaces. With SMM, the other address space
can therefore have a shadow page even when the supplied memslot allows a
hugepage.
Check the corresponding memslot in the other address space before
taking the fast path. Skip the shadow-page lookup only when all address
spaces allow a hugepage.
Fixes: b3ae3ceb55 ("KVM: x86/mmu: KVM: x86/mmu: Skip unsync when large pages are allowed")
Assisted-by: Codex:GPT-5
Signed-off-by: Jinu Kim <kimjw04271234@gmail.com>
[invert direction of the conditional. - Paolo]
Message-ID: <20260721103512.2136240-3-kimjw04271234@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_gfn_is_write_tracked() checks only the supplied memslot, but page
tracking is per-address-space and shadow pages are shared across all
address spaces. With SMM, a GFN can therefore be write-tracked in one
address space and appear untracked through the other.
Check the supplied slot first, then the slot for the other address space.
This ensures all callers honor write tracking regardless of the active
address space. In particular, it prevents mmu_try_to_unsync_pages() from
marking an upper-level shadow page unsync and eventually triggering the
BUG in pte_list_remove().
Fixes: 699023e239 ("KVM: x86: add SMM to the MMU role, support SMRAM address space")
Assisted-by: Codex:GPT-5
Signed-off-by: Jinu Kim <kimjw04271234@gmail.com>
Message-ID: <20260721103512.2136240-2-kimjw04271234@gmail.com>
[invert direction of the conditional. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
pmbus_update_byte_data() is supposed to return a negative error code or 0.
However, if no change is made to the register, it actually returns the
register value. This can result in problems if the calling code explicitly
expects to see an error code or 0.
Fix it to return 0 on success or the error code as expected.
Fixes: 11c119986f ("hwmon: (pmbus) add helpers for byte write and read modify write")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cancel (and flush) the I/O APIC's delayed EOI handling work during the
"pre VM destroy" phase, before vCPUs are destroyed, as processing the EOI
broadcast will inject another IRQ if the line is asserted, i.e. will try
to deliver an IRQ to the target vCPU(s). Canceling the work after vCPUs
are destroyed leads to UAF if the delayed work is processed after vCPUs are
destroyed.
BUG: KASAN: slab-use-after-free in __kvm_irq_delivery_to_apic_fast+0x9bf/0xa20 arch/x86/kvm/lapic.c:1250
Read of size 8 at addr ffff8880499abea0 by task kworker/1:2/1218
CPU: 1 UID: 0 PID: 1218 Comm: kworker/1:2 Not tainted 7.1.0-rc7 #5 PREEMPT(lazy)
Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: events kvm_ioapic_eoi_inject_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94
dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378
print_report+0x139/0x4ad mm/kasan/report.c:482
kasan_report+0xe4/0x1d0 mm/kasan/report.c:595
__kvm_irq_delivery_to_apic_fast+0x9bf/0xa20 arch/x86/kvm/lapic.c:1250
__kvm_irq_delivery_to_apic+0xd8/0xbf0 arch/x86/kvm/lapic.c:1345
kvm_irq_delivery_to_apic arch/x86/kvm/lapic.h:129
ioapic_service+0x308/0x590 arch/x86/kvm/ioapic.c:492
kvm_ioapic_eoi_inject_work+0x13c/0x190 arch/x86/kvm/ioapic.c:532
process_one_work+0xa59/0x19a0 kernel/workqueue.c:3314
process_scheduled_works kernel/workqueue.c:3397
worker_thread+0x5eb/0xe50 kernel/workqueue.c:3478
kthread+0x370/0x450 kernel/kthread.c:436
ret_from_fork+0x72b/0xd30 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Note, the VM is unreachable once kvm_destroy_vm() starts, and scheduling
new work via kvm_ioapic_send_eoi() can only be done via KVM_RUN, i.e.
requires a live vCPU.
Alternatively, KVM could simply destroy the I/O APIC during the "pre" phase
of VM destruction, but that gets more than a bit sketchy as KVM expects the
I/O APIC to exist if ioapic_in_kernel() is true, and nested virtualization
in particular has a bad habit of touching VM-scope state during vCPU
destruction. E.g. attempting to free the PIC during the pre phase would
lead to a NULL pointer dereference in kvm_cpu_has_extint(), and it's not
hard to imagine the I/O APIC having a similar flaw.
Fixes: 17bcd71442 ("KVM: x86: Free vCPUs before freeing VM state")
Reported-by: <zdi-disclosures@trendmicro.com>
Reported-by: Zhong Wang <wangzhong.c0ss4ck@bytedance.com>
Reported-by: Xuanqing Shi <shixuanqing.11@bytedance.com>
Cc: stable@vger.kernel.org
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260727171718.543491-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VMCLEAR/VMREAD/VMWRITE/VMPTRLD access the internal VMCS cache, which
is not visible to the compiler; without a memory clobber, the compiler
can reorder them in troublesome ways because "asm volatile" and "asm goto"
only protect against removal of the asm. For example, placing a VMWRITE
before the corresponding VMCS pointer is loaded can lead to corruption.
While none of this has been observed, it is better to prevent than cure.
Likewise, INVEPT and INVVPID access the TLB and, even though in their
case the effect is only visible to the next VMLAUNCH/VMRESUME, it is
technically correct to add the clobber there too. So avoid any urge to
special case them, and simply hardcode "memory" into the clobber list
of vmx_asm1() and vmx_asm2(). __vmcs_readl() open-codes its own asm,
so add the clobber there as well.
Link: https://lore.kernel.org/kvm/CABgObfbL3t21yVeSwiLSjjOUER+rTYDPHYAH9YU4TWGRjx6XHg@mail.gmail.com/
Cc: Sean Christopherson <seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM/arm64 fixes for 7.2, take #3
- Fix a tiny buglet when propagating the deactivation of an interrupt
from a nested guest, which happened to trigger a gold plated CPU bug
on a particular implementation
- Fix a race between LPI unmapping and mapping, resulting in leaked
LPIs
- Make LPI mapping more robust on memory allocation failure
- Fix the handling of the EL2 tracing clock being disabled
- A couple of Sashiko-driven fixes for corner cases in the EL2 tracing
code
- Add missing sysreg tracepoint for the EL2 code
- Tidy-up the mutual exclusion of guest-memfd and MTE
- Update Fuad's email address to point to @linux.dev
The bus matching rework made of_match_bus() return NULL for nodes with
ranges/dma-ranges but no local #address-cells. parser_init() stored that
NULL bus, and the range iterator later dereferenced it.
Reject such nodes in parser_init(), leaving an explicit empty
iterator for callers that ignore the init return, and make
of_dma_get_max_cpu_address() honour the init failure so a rejected node
cannot clamp the DMA limit.
Fixes: 64ee3cf096 ("of/address: Rework bus matching to avoid warnings")
Cc: stable@vger.kernel.org
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Link: https://patch.msgid.link/20260727-of-range-parser-null-bus-v3-1-be01b708a4ce@baylibre.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
On some i.MX platforms, certain I2C client drivers keep a periodic
workqueue which continues to trigger I2C transfers.
During system suspend/resume, there exists a time window between:
- suspend_noirq and the system entering suspend
- the system starting to resume and resume_noirq
In this window, the I2C controller resources such as clock and pinctrl
may already be disabled or not yet restored.
If a workqueue triggers an I2C transfer in this period, the driver
attempts to access I2C registers while the hardware resources are
unavailable, which may lead to system hang.
Mark the I2C adapter as suspended during noirq suspend and block new
transfers until resume, ensuring that I2C transfers are only issued
when hardware resources are available.
Fixes: 358025ac09 ("i2c: imx: make controller available until system suspend_noirq() and from resume_noirq()")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Cc: <stable@vger.kernel.org> # v6.14+
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260525030400.3182911-1-carlos.song@oss.nxp.com
enable_trace_fprobe() sets the file link or the TP_FLAG_PROFILE flag and
then registers each trace_fprobe in the probe list. If
__register_trace_fprobe() fails partway through, the function returns
immediately without unregistering the trace_fprobes it already registered
or undoing the file link / flag it set, leaving the event half-enabled and
leaking the registered fprobe(s).
enable_trace_kprobe() already handles this with a rollback path. Do the
same for fprobe: on failure, unregister all probes and clear the file link
or profile flag.
Link: https://lore.kernel.org/all/20260724064208.480030-1-raushan.jhon@gmail.com/
Fixes: 334e5519c3 ("tracing/probes: Add fprobe events for tracing function entry and exit.")
Cc: stable@vger.kernel.org
Signed-off-by: Raushan Patel <raushan.jhon@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Pull btrfs fixes from David Sterba:
"Zoned mode:
- fix assertion and handle case of finished zone and truncated extent
- fix zone metadata write pointer on actual zone reset
- fix deadlock caused metadata writeback and transaction commit
- fix return value reuse leading to confusion about chunk
reservations
raid56 scrub:
- fix tracking of sector checksums when there are not checksums found
- fix inverted logic when submitting parity read bio
mount/remount fixes:
- fix leaking 'remount in progress' state which can break other
operations to work (qgroup rescan, autodefrag, reclaim)
- adjust using global block reserve after read-only mount when using
rescue= option
- handle missing raid stripe tree when mounted with 'ignorebadroots'
Misc:
- fix -Wmaybe-uninitialized warning in GET_CSUMS ioctl"
* tag 'for-7.2-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: raid56: fix scrub read assembly submitting no reads
btrfs: zoned: skip fully truncated ordered extents at zone finish
btrfs: initialize 'args' to avoid compiler warning in btrfs_ioctl_get_csums()
btrfs: zoned: fix missing chunk metadata reservation
btrfs: raid56: fix an incorrect csum skip during scrub
btrfs: report missing raid stripe tree root during lookup
btrfs: skip global block reserve accounting for rescue mounts
btrfs: zoned: reset meta_write_pointer on zone reset
btrfs: zoned: fix deadlock between metadata writeback and transaction commit
btrfs: fix leaking BTRFS_FS_STATE_REMOUNTING flag
traceprobe_expand_meta_args() parses $argN with simple_strtoul() and
calls sprint_nth_btf_arg(n - 1, ...). For $arg0, n is 0 so the index is
-1. Because ctx->nr_params is signed, the "idx >= nr_params" guard in
sprint_nth_btf_arg() does not catch the negative index, and
ctx->params[-1].name_off is read out of bounds.
The normal per-argument path (parse_probe_vars()) already rejects
$arg0 via its argument-number check, but meta-argument expansion runs
before per-argument parsing and substitutes the value first, bypassing
that check.
Reject $arg0 explicitly during expansion.
Link: https://lore.kernel.org/all/20260724054435.146279-1-raushan.jhon@gmail.com/
Fixes: 18b1e870a4 ("tracing/probes: Add $arg* meta argument for all function args")
Cc: stable@vger.kernel.org
Signed-off-by: Raushan Patel <raushan.jhon@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
bm_get_tree() takes a reference to the user namespace and hands it to
get_tree_keyed() as the sget key. sget_fc() moves that reference into
sb->s_fs_info and clears fc->s_fs_info, so from that point on the
superblock owns it and bm_free() doesn't see it anymore.
The superblock drops it in ->put_super(). But generic_shutdown_super()
only calls ->put_super() from inside the if (sb->s_root) branch, so
nothing releases it when bm_fill_super() fails:
- The kzalloc_obj() failure leaves s_root NULL and the whole branch is
skipped.
- A simple_fill_super() failure in the file loop leaves s_root set, but
s_op still points at simple_super_operations, which has no
->put_super(). bm_fill_super() installs s_ops only once
simple_fill_super() returned success, and installing it earlier
wouldn't help either because simple_fill_super() overwrites s_op.
Either way vfs_get_super() calls deactivate_locked_super() and the
reference is gone for good. binfmt_misc mounts are available in a user
namespace and both the inode and the dentry cache are SLAB_ACCOUNT, so
an unprivileged caller under a tight memory cgroup can fail
simple_fill_super() on demand and leak one user namespace per attempt.
Drop the reference in ->kill_sb() instead, which runs unconditionally,
the same way nfsd and rpc_pipefs release their keyed s_fs_info.
That also stops ->put_super() from clearing s_fs_info while the
superblock is still on @fs_supers. generic_shutdown_super() leaves it
there on purpose so that sget_fc() keeps finding it until kill_sb() has
run, but a NULL s_fs_info makes test_keyed_super() miss it, so a
concurrent mount for the same user namespace skips the grab_super()
wait and creates a second superblock for a namespace that is still
being torn down.
Link: https://patch.msgid.link/20260728-work-binfmt_misc-usernsleak-v1-1-dbd8d5e626e7@kernel.org
Fixes: 21ca59b365 ("binfmt_misc: enable sandboxed mounts")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
The registration string starts with a user chosen delimiter that
separates the individual fields. So that the field parsers terminate
even on a truncated string create_entry() pads the buffer with that
same delimiter:
memset(buf + count, del, 8);
Most fields are scanned for the delimiter with strchr()/scanarg() and
happily stop on the padding. The flags field is different: instead of
scanning for the delimiter check_special_flags() consumes the flag
characters 'P', 'O', 'C' and 'F' and stops at the first byte that is
none of them, relying on the trailing delimiter to end the scan.
If the delimiter is itself a flag character the padding no longer acts
as a terminator. The scan swallows all eight padding bytes and keeps
reading past the end of the allocation until it hits a byte that is
not a flag character. For example registering
PaPEPPxPPiP
with 'P' as the delimiter (name "a", type extension, magic "x",
interpreter "i", empty flags) leaves the flag scan running off the end
of the buffer. The registration is rejected in the end because the
parser does not stop exactly at buf + count, but only after the out of
bounds read has already happened. With an unlucky allocation layout the
scan can walk into an unmapped page; under KASAN it is reported as a
slab out of bounds read. binfmt_misc mounts are available to
unprivileged users in a user namespace so the read is reachable without
privileges.
Reject a delimiter that is one of the flag characters up front. Such a
registration was always rejected anyway, only after the out of bounds
read, so no valid registration string changes meaning.
Link: https://patch.msgid.link/20260710-work-binfmt_misc-locking-v3-3-a162f7cb58d6@kernel.org
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
For MISC_FMT_OPEN_FILE entries load_misc_binary() clones the
registered interpreter file and denies write access to the clone via
plain deny_write_access(). The clone is installed as
bprm->interpreter and later released by the exec machinery through
exe_file_allow_write_access() which skips the i_writecount increment
for files with FMODE_FSNOTIFY_HSM set.
The deny and allow side can therefore come to different conclusions
when pre-content watches are in play: if a pre-content watch is added
to the interpreter after registration every subsequent exec through
that entry takes a write denial on the clone that is never paired
with a write allowance, driving the interpreter inode's i_writecount
further down with each exec and leaving the interpreter unwritable
even after the entry and all its users are gone.
Take the write denial via exe_file_deny_write_access() so both sides
of the pairing base their decision on the same file mode, and
propagate failure instead of silently ignoring it: an interpreter
that is concurrently open for writing now fails the exec with
ETXTBSY, exactly like an interpreter freshly opened via open_exec()
would.
Link: https://patch.msgid.link/20260710-work-binfmt_misc-locking-v3-2-a162f7cb58d6@kernel.org
Fixes: 0357ef03c9 ("fs: don't block write during exec on pre-content watched files")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Registering an entry with the MISC_FMT_OPEN_FILE flag opens the
interpreter via open_exec() which denies write access to it for as
long as the entry exists. Removing the entry closes the interpreter
file via filp_close() but never restores write access, leaving the
inode's i_writecount permanently negative. Opening the interpreter
for writing keeps failing with ETXTBSY long after the entry is gone
until the inode is evicted from the inode cache.
Commit 90f601b497 ("binfmt_misc: restore write access before
closing files opened by open_exec()") fixed the same imbalance in the
error path of bm_register_write() but the actual removal path has
been leaking the write denial since the introduction of the flag.
Restore write access in put_binfmt_handler() before closing the
interpreter file.
Link: https://patch.msgid.link/20260710-work-binfmt_misc-locking-v3-1-a162f7cb58d6@kernel.org
Fixes: 948b701a60 ("binfmt_misc: add persistent opened binary handler for containers")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Christian Brauner <brauner@kernel.org> says:
An entry registered with 'F' opens its interpreter at registration time
and holds that file until the entry is freed. Any entry nobody removes
by hand only gets closed once the binfmt_misc superblock is shut down.
If the interpreter lives on a mount that keeps that superblock alive the
two pin each other:
binfmt_misc sb -> inode -> entry -> interp_file -> vfsmount -> binfmt_misc sb
TL;DR the file is never closed. Once the mount namespace is gone there
is nothing left to unregister through either.
There are two ways to trigger this bug:
- Point the interpreter at the instance itself. Its files are regular
files owned by the mounter and both bm_get_inode() and
simple_fill_super() leave i_op at empty_iops. So notify_change() falls
back to simple_setattr() and chmod +x works. We never set SB_I_NOEXEC
and so open_exec() accepts it.
- Use the instance as an overlayfs lower layer. The overlay superblock
holds a clone_private_mount() of every layer until it is destroyed and
that clone is in no namespace. So umount_tree() never reaches it.
That's a DoS. And it isn't only the superblock that leaks. It pins the
user namespace it was mounted in, so every iteration permanently eats
one of the caller's user namespace charges.
So let's just do the sane thing. SB_I_NOEXEC makes open_exec() fail on
the instance's own files and s_stack_depth makes overlayfs reject the
layer before it ever takes a clone. That also covers the ecryptfs and
fuse passthrough variants. What 'F' promises is unchanged.
The stable tag is narrower than the Fixes tags on purpose. Before
sandboxed mounts this needed global root against the single instance
everyone shares, and the change doesn't apply to those trees anyway.
* patches from https://patch.msgid.link/20260728-work-binfmt_misc-selfpin-v1-0-74df5daeca5b@kernel.org:
binfmt_misc: don't let an 'F' entry pin its own instance
Link: https://patch.msgid.link/20260728-work-binfmt_misc-selfpin-v1-0-74df5daeca5b@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
An entry registered with 'F' opens its interpreter at registration time
and holds that file until the entry is freed. Any entry nobody removes
by hand only gets closed once the binfmt_misc superblock is shut down.
If the interpreter lives on a mount that keeps that superblock alive the
two pin each other:
binfmt_misc sb -> inode -> entry -> interp_file -> vfsmount -> binfmt_misc sb
TL;DR the file is never closed. Once the mount namespace is gone there
is nothing left to unregister through either.
There are two ways to trigger this bug:
- Point the interpreter at the instance itself. Its files are regular
files owned by the mounter and both bm_get_inode() and
simple_fill_super() leave i_op at empty_iops. So notify_change() falls
back to simple_setattr() and chmod +x works. We never set SB_I_NOEXEC
and so open_exec() accepts it.
- Use the instance as an overlayfs lower layer. The overlay superblock
holds a clone_private_mount() of every layer until it is destroyed and
that clone is in no namespace. So umount_tree() never reaches it.
That's a DoS. And it isn't only the superblock that leaks. It pins the
user namespace it was mounted in, so every iteration permanently eats
one of the caller's user namespace charges.
So let's just do the sane thing. SB_I_NOEXEC makes open_exec() fail on
the instance's own files and s_stack_depth makes overlayfs reject the
layer before it ever takes a clone. That also covers the ecryptfs and
fuse passthrough variants. What 'F' promises is unchanged.
The stable tag is narrower than the Fixes tags on purpose. Before
sandboxed mounts this needed global root against the single instance
everyone shares, and the change doesn't apply to those trees anyway.
Note that SB_I_NODEV is implicitly raised for userns mounts but raise it
explicitly here as well.
Link: https://patch.msgid.link/20260728-work-binfmt_misc-selfpin-v1-1-74df5daeca5b@kernel.org
Fixes: 948b701a60 ("binfmt_misc: add persistent opened binary handler for containers")
Fixes: 21ca59b365 ("binfmt_misc: enable sandboxed mounts")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
David Howells <dhowells@redhat.com> says:
Here are some miscellaneous fixes for netfslib.
(1) Clear PG_private_2 on copy-to-cache append failure.
(2) Fix handling of rolling buffer allocation failure in single-object
writeback. This is probably unnecessary with (4), but if we're only
writing to the cache, we can skip the write.
(3) Fix cleanup of readeahead folios if iterator preparation fails.
(4) Fix folio_queue allocation failure in writeback by adding a mempool.
This also improves request and subrequest allocation.
* patches from https://patch.msgid.link/20260727130716.1099906-1-dhowells@redhat.com:
netfs: Fix folio_queue ENOMEM in writeback by adding a mempool
netfs: release readahead folios on iterator preparation failure
netfs: handle single writeback rolling buffer allocation failure
netfs: clear PG_private_2 on copy-to-cache append failure
Link: https://patch.msgid.link/20260727130716.1099906-1-dhowells@redhat.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
ieee80211_process_rx_twt_action() only partially validates a received
S1G TWT setup frame before queueing it.
An individual agreement can therefore reach ieee80211_s1g_rx_twt_setup()
with twt->length too short for the full struct ieee80211_twt_params.
The individual path passes twt to drv_add_twt_setup(). Both the tracepoint
and the driver callback consume the complete parameters block, not merely
req_type. Do not pass a short individual agreement to the driver.
Broadcast agreements remain unchanged because they are rejected locally
after accessing only req_type.
Fixes: f5a4c24e68 ("mac80211: introduce individual TWT support in AP mode")
Assisted-by: Codex:gpt-5
Assisted-by: Claude:opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260723010928.76551-1-enderaoelyther@gmail.com
[edit commit message to not overclaim lack of validation nor
understate driver impact]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
nl80211_pmsr_start() assigns the request cookie, calls the driver's
->start_pmsr() callback, and only then adds the request to
wdev->pmsr_list, without holding pmsr_lock for the addition.
mac80211_hwsim saves the request in its start callback and returns. Since
nl80211 uses parallel_ops, an immediate REPORT_PMSR can then run before
nl80211_pmsr_start() reaches its post-start list_add_tail(). hwsim also
dispatches reports from its virtio receive workqueue. Completion removes
the request from wdev->pmsr_list under pmsr_lock and frees it.
Thus completion can precede publication, race the unlocked list mutation,
or free the request before nl80211_pmsr_start() reads req->cookie for the
netlink reply.
Add the request to wdev->pmsr_list under pmsr_lock before calling the
driver, and use a cookie value saved before the call so the request is not
dereferenced after a successful start. On an error return the driver has
not retained or completed the request, so remove it from the list under the
lock and free it.
Fixes: 9bb7e0f24e ("cfg80211: add peer measurement with FTM initiator API")
Link: https://lore.kernel.org/all/20260723010916.76433-1-enderaoelyther@gmail.com/
Assisted-by: Codex:gpt-5
Assisted-by: Claude:opus-4.8
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260723202223.99661-1-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mwifiex_11n_dispatch_amsdu_pkt() splits an A-MSDU with
ieee80211_amsdu_to_8023s() and walks the resulting subframes. For each
subframe it passes the subframe data pointer to
mwifiex_process_tdls_action_frame(), but pairs it with skb->len, the
length of the A-MSDU parent, instead of rx_skb->len:
rx_skb = __skb_dequeue(&list);
rx_hdr = (struct rx_packet_hdr *)rx_skb->data;
if (ISSUPP_TDLS_ENABLED(priv->adapter->fw_cap_info) &&
ntohs(rx_hdr->eth803_hdr.h_proto) == ETH_P_TDLS) {
mwifiex_process_tdls_action_frame(priv, (u8 *)rx_hdr,
skb->len);
}
The parent is not a valid description of that buffer, and may not be
valid memory at all. ieee80211_amsdu_to_8023s() ends with
if (!reuse_skb)
dev_kfree_skb(skb);
and it only sets reuse_skb when the parent is linear, is not a
head_frag, and is being consumed as the *last* subframe. So when the
parent does not qualify for reuse it has already been freed, and the
read of skb->len is a use-after-free. When it is reused, skb->len is
the length of the last subframe, applied to every earlier subframe,
which over-states the buffer whenever an earlier subframe is shorter.
The callee cannot absorb a wrong length, because it derives its own
ceiling from the value it is given. Each frame type computes
ies_len = len - sizeof(struct ethhdr) - TDLS_*_FIX_LEN;
and the element walk is then bounded entirely against that ceiling,
for (end = pos + ies_len; pos + 1 < end; pos += 2 + pos[1]) {
u8 ie_len = pos[1];
if (pos + 2 + ie_len > end)
break;
so a too-large len moves end past the end of the subframe and the walk
reads and copies beyond it. The A-MSDU layout is chosen by the sender,
which makes the difference between the last subframe and a shorter
earlier one remotely selectable. Reaching this requires TDLS support in
firmware and the TDLS ethertype on the subframe.
The other caller, mwifiex_process_rx_packet(), is correct: it passes a
pointer and a length that describe the same region of the RX buffer.
Pass rx_skb->len, the length of the subframe actually being parsed.
Fixes: 776f742040 ("mwifiex: fix AMPDU not setup on TDLS link problem")
Assisted-by: Codex:gpt-5.6-sol
Assisted-by: Kimi:K3
Cc: stable@vger.kernel.org
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260728115325.19128-1-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The KASAN allocation trace shows that a malformed IE buffer is
stored via SIOCSIWGENIE (cfg80211_wext_siwgenie()) without any
validation. The crash trace shows that a subsequent SIOCSIWESSID
triggers a connection attempt which calls cfg80211_sme_get_conn_ies()
to process the stored IE buffer, causing:
- An out-of-bounds read in skip_ie() which reads ies[pos+1]
(the length byte) past the end of the 1-byte buffer.
- An integer underflow in the memcpy size argument when offs
returned by ieee80211_ie_split() exceeds ies_len, causing
unsigned subtraction to wrap to SIZE_MAX and triggering a
fortify panic.
Fix this by validating the IE buffer in cfg80211_wext_siwgenie()
before storing it.
Reported-by: syzbot+cc867e537e4bd36f69bb@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=cc867e537e4bd36f69bb
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Link: https://patch.msgid.link/20260725142028.32560-1-kartikey406@gmail.com
[drop unnecessary ie_len check, update commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Jeff Johnson says:
==================
ath.git update for v7.2-rc6
Fix an ath12k MLO regression impacting WCN7850/QCC2072.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_stop_tx_ba_cb() hands tid_tx to kfree_rcu() through
ieee80211_remove_tid_tx(), and then reads tid_tx->ndp after dropping
sta->lock:
ieee80211_remove_tid_tx(sta, tid); /* kfree_rcu(tid_tx, rcu_head) */
...
spin_unlock_bh(&sta->lock);
if (start_txq)
ieee80211_agg_start_txq(sta, tid, false);
if (send_delba)
ieee80211_send_delba(..., tid_tx->ndp);
That read is not covered by an RCU read-side critical section, and it runs
in preemptible process context: both callers hold the wiphy mutex, reaching
it either from the ieee80211_ba_session_work() wiphy work or from
ieee80211_sta_tear_down_BA_sessions() during station teardown.
Softirqs can run in that window too, both from the local_bh_enable() that
ends ieee80211_agg_start_txq() and from any interrupt exit, so the RCU
callback can free tid_tx before the read.
Driving the function from a test module with the grace period forced into
that window, KASAN reports the read, and the free arrives on the ordinary
RCU softirq path:
BUG: KASAN: slab-use-after-free in ieee80211_stop_tx_ba_cb+0x3cd/0x400
Read of size 1 at addr ffff888002b9f52e by task kworker/0:1/10
[...]
Freed by task 57:
__kasan_slab_free+0x47/0x70
__rcu_free_sheaf_prepare+0x70/0x250
rcu_free_sheaf_nobarn+0x18/0x40
rcu_core+0x426/0x1310
handle_softirqs+0x144/0x590
__irq_exit_rcu+0xea/0x150
irq_exit_rcu+0x9/0x20
sysvec_apic_timer_interrupt+0x6b/0x80
asm_sysvec_apic_timer_interrupt+0x1a/0x20
send_delba is only set when tx_stop is set, which happens for
AGG_STOP_LOCAL_REQUEST alone, so this is reached on local teardown -
session idle timeout, PTK rekey, suspend, HW reconfig - and not from a
peer's DELBA.
Read ndp into a local before the session is freed, while sta->lock is still
held. tid_tx->ndp has a single writer, in
ieee80211_tx_ba_session_handle_start(), which cannot run concurrently here:
both paths are serialised by the wiphy mutex, and the session is already
marked HT_AGG_STATE_STOPPING at this point. tid_tx->ndp is also the only
tid_tx dereference left after ieee80211_remove_tid_tx() in this function.
Fixes: 98acd4c1d9 ("wifi: mac80211: add support for NDP ADDBA/DELBA for S1G")
Assisted-by: Codex:gpt-5.6-sol
Assisted-by: Kimi:K3
Cc: stable@vger.kernel.org
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260728112156.96822-1-enderaoelyther@gmail.com
[move/change the comment a bit to be more general not just on ndp,
initialize ndp directly]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The binner BO is a single 16MB buffer split into 512KB slots that are
handed out to jobs at submission time and recycled as jobs complete,
without ever being cleared. Each slot holds the job's Tile State Data
Array (TSDA) at its start, followed by the tile allocation pool.
While the tile allocation pool is only walked by the render thread
through branches the binner generated during the current job, the
TSDA is the PTB's own per-tile bookkeeping and is consumed by the
hardware itself. Although the kernel sets the "Auto-initialise Tile
State Data Array" flag in the tile binning mode configuration, the
PTB demonstrably still acts on stale tile state left by the slot's
previous user: the binner ends up creating invalid command streams
with invalid primitive streams and branches, which can cause GPU hangs
as observed in [1][2].
Zero the TSDA when the job's binning slot is configured. This clears
48 bytes per tile (~24KB for a 1080p frame) in the submission path, and
guarantees the PTB never sees another job's tile state.
The tile count is only checked for being non-zero today, so the 8-bit
fields it comes from can describe a tile state array almost six times
larger than the slot it has to live in. Bound it before the slot is
handed out, since such size decides how much of the slot is left for
the tile alloc pool.
Link: https://github.com/raspberrypi/linux/issues/3221 [1]
Link: https://github.com/raspberrypi/linux/issues/5780 [2]
Fixes: 553c942f8b ("drm/vc4: Allow using more than 256MB of CMA memory.")
Cc: stable@vger.kernel.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260727-vc4-bin-oom-fixes-v2-2-0d8a5eddc7c9@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
vc4_overflow_mem_work() points BPOA at a 512KB slot inside the 16MB
binner BO, but writes the size of the whole BO to BPOS. On every binner
out-of-memory event the PTB is therefore authorized to write tile lists
across all the other slots (which may hold the tile state, tile alloc and
overflow memory of in-flight jobs) and, for any slot but the first, past
the end of the binner BO into unrelated CMA memory.
Since CMA pages are recycled into page cache and user allocations, this
is arbitrary memory corruption by GPU DMA. In practice it shows up as GPU
hangs with corrupted control list pointers, userspace heap corruption, a
GPU that stays permanently wedged after the first hang, and occasional
full system crashes, whenever a job overflows the initial binner slot.
The bug dates back to the conversion from a dedicated overflow BO (where
writing the full BO size was correct) to the slotted binner BO.
Fixes: 553c942f8b ("drm/vc4: Allow using more than 256MB of CMA memory.")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4.8
Signed-off-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260727-vc4-bin-oom-fixes-v2-1-0d8a5eddc7c9@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
syzbot reported a memory leak [1] in the UDP tunnel NIC offload code.
When device registration fails (e.g. in register_netdevice()), netdev core
unwinds by sending a single NETDEV_UNREGISTER notification. If work was queued
during NETDEV_REGISTER (utn->work_pending is set), udp_tunnel_nic_unregister()
returns early:
if (utn->work_pending)
return;
Because failed registrations do not enter netdev_wait_allrefs_any(), no
subsequent NETDEV_UNREGISTER rebroadcast will ever occur. As a result, the
struct udp_tunnel_nic allocated in udp_tunnel_nic_alloc() is leaked
permanently.
Fix this by removing the early return. Instead, synchronously cancel any
pending work with cancel_delayed_work_sync() before freeing @utn.
To be able to call cancel_delayed_work_sync() while holding RTNL (the work also
needs RTNL), switch udp_tunnel_nic_device_sync_work() to rtnl_trylock(). If RTNL
is contended, requeue the work with a 1 jiffy delay (via queue_delayed_work())
to prevent high CPU contention while waiting for RTNL lock.
The utn->work_pending bookkeeping is no longer needed and is removed, as
the workqueue core already tracks the pending/running state of the work.
[1]
BUG: memory leak
unreferenced object 0xffff888127d5f840 (size 96):
comm "syz-executor", pid 5806, jiffies 4294942188
backtrace (crc 99fdb6c8):
__kmalloc_noprof+0x3bf/0x550
udp_tunnel_nic_alloc net/ipv4/udp_tunnel_nic.c:756 [inline]
udp_tunnel_nic_register net/ipv4/udp_tunnel_nic.c:833 [inline]
udp_tunnel_nic_netdevice_event+0x804/0xab0 net/ipv4/udp_tunnel_nic.c:931
notifier_call_chain+0x59/0x160 kernel/notifier.c:85
call_netdevice_notifiers_info+0x7d/0xb0 net/core/dev.c:2250
register_netdevice+0xc10/0xeb0 net/core/dev.c:11478
Fixes: cc4e3835ef ("udp_tunnel: add central NIC RX port offload infrastructure")
Reported-by: syzbot+eca845fb8c18dd6b44c1@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a632b15.dde6c935.cf6c8.0011.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260724091137.1792543-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
bpf_lwt_xmit_reroute() obtains a referenced dst from the route
lookup. When skb_cow_head() fails before that dst is installed on the
skb, the error path only frees the skb. The skb still owns its previous
dst, so the newly looked up dst reference is leaked.
Release the new dst reference before freeing the skb on this error
path.
Fixes: 3bd0b15281 ("bpf: add handling of BPF_LWT_REROUTE to lwt_bpf.c")
Cc: stable@vger.kernel.org
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Link: https://patch.msgid.link/20260723060445.21926-1-xuanqiang.luo@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
__smc_lgr_terminate() drops conns_lock after finding a connection in
lgr->conns_all, but before taking a reference on its socket. The connection
is embedded in the socket, and its registration reference protects it only
while the connection remains in the tree.
A concurrent close can unregister the connection and drop that reference,
freeing the socket before the termination worker reaches sock_hold().
The race is reachable when close overlaps link group termination.
Local stress testing reproduced the use-after-free and KASAN reported:
BUG: KASAN: slab-use-after-free in __smc_lgr_terminate.part.0 [smc]
Write of size 4 by task kworker/3:3
Workqueue: events smc_lgr_terminate_work [smc]
__smc_lgr_terminate.part.0 [smc]
The socket was allocated by smc_create(), freed through
slab_free_after_rcu_debug(), and was followed by:
refcount_t: addition on 0; use-after-free.
__smc_lgr_terminate.part.0 [smc]
Take the socket reference while conns_lock still protects the tree entry.
The unregister path then cannot drop the last reference until termination
has finished using the socket.
Fixes: 69318b5215 ("net/smc: improve abnormal termination locking")
Cc: stable@vger.kernel.org
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Reviewed-by: Mahanta Jambigi <mjambigi@linux.ibm.com>
Link: https://patch.msgid.link/20260723105454.87016-1-xuanqiang.luo@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
u32_change() copies the user-provided tc_u32_sel.offshift (unsigned char,
0-255) into the kernel knode object without bounds validation. When a
packet later hits u32_classify() with TC_U32_VAROFFSET set, it evaluates
`ntohs(offmask & *data) >> offshift` where the left operand is a 16-bit
value promoted to a 32-bit int. Any offshift >= 32 is undefined behavior
per C11 6.5.7p3, triggerable by an unprivileged user via user/network
namespaces.
UBSAN: shift-out-of-bounds in net/sched/cls_u32.c:236:43
shift exponent 32 is too large for 32-bit type int
Fix this by rejecting offshift >= 16 during filter creation in
u32_change().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: AutonomousCodeSecurity@microsoft.com
Link: https://lore.kernel.org/all/20260720034514.23053-1-blbllhy@gmail.com
Signed-off-by: Cen Zhang (Microsoft) <blbllhy@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Tested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260723044955.89471-1-blbllhy@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
mpls_getroute() builds the RTM_NEWROUTE reply to an RTM_GETROUTE
request by filling a struct rtmsg allocated from an skb whose data
area is not zeroed (alloc_skb(NLMSG_GOODSIZE, ...)). It sets every
field of the header except rtm_tos:
r = nlmsg_data(nlh);
r->rtm_family = AF_MPLS;
r->rtm_dst_len = 20;
r->rtm_src_len = 0;
r->rtm_table = RT_TABLE_MAIN;
r->rtm_type = RTN_UNICAST;
r->rtm_scope = RT_SCOPE_UNIVERSE;
r->rtm_protocol = rt->rt_protocol;
r->rtm_flags = 0;
struct rtmsg has no padding, so the one uninitialised byte rtm_tos
(offset 3) is copied straight to user space on recvmsg(), leaking a
byte of uninitialised heap memory. This is in contrast to
mpls_dump_route(), which fills the very same header and does set
rtm_tos = 0.
Initialize rtm_tos to 0, matching mpls_dump_route().
Reproduced with KMSAN by adding an MPLS route and issuing a
non-RTM_F_FIB_MATCH RTM_GETROUTE for its label:
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x36c/0x33f0
_copy_to_iter+0x36c/0x33f0
__skb_datagram_iter+0x196/0x12c0
skb_copy_datagram_iter+0x5b/0x210
netlink_recvmsg+0x37b/0xef0
...
Uninit was created at:
__alloc_skb+0x8ca/0x10e0
mpls_getroute+0x1280/0x3a40
rtnetlink_rcv_msg+0x1138/0x15a0
...
Byte 19 of 64 is uninitialized
(byte 19 = nlmsghdr(16) + rtmsg offset 3 = rtm_tos)
Fixes: 397fc9e5ce ("mpls: route get support")
Signed-off-by: Yehyeong Lee <yhlee@isslab.korea.ac.kr>
Link: https://patch.msgid.link/20260723010830.289917-1-yhlee@isslab.korea.ac.kr
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
fou_create() publishes struct fou through sk_user_data before adding the
new FOU port to the per-netns list. If fou_add_to_port_list() fails,
the error path frees fou while it is still reachable through
sk_user_data. A concurrent receive can then dereference the freed
object in fou_from_sock().
This ordering issue was previously noted in the linked discussion.
The failure is reachable when local port 0 is requested. Each socket
binds to a different ephemeral port, but fou_cfg_cmp() compares the
requested port 0 and reports -EALREADY once an entry already exists.
Release the tunnel socket before freeing fou so sk_user_data is cleared
first, and defer reclamation with kfree_rcu() to protect concurrent RCU
readers. This matches the lifetime handling in fou_release().
Fixes: 23461551c0 ("fou: Support for foo-over-udp RX path")
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://lore.kernel.org/netdev/20260502031401.3557229-12-kuniyu@google.com/
Cc: stable@vger.kernel.org
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Link: https://patch.msgid.link/20260722083858.182506-1-xuanqiang.luo@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
I2C controllers may have child devices with GpioInt resources that
depend on GPIO controllers being fully initialized. If the I2C
controller probes and enumerates children before the referenced GPIO
controller has completed probe, GPIO interrupts may not be properly
configured, leading to device failures.
On Lenovo Yoga 7 14AGP11, the WACF2200 touchscreen (child of
AMDI0010:02) has a GpioInt resource pointing to GPIO 157 on the
pinctrl-amd controller (AMDI0030:00). When i2c-designware probes
AMDI0010:02 before pinctrl-amd finishes initializing, I2C transactions
fail with lost arbitration errors:
0.285952 amd_gpio_probe: registering gpiochip <- GPIO chip visible
0.287121 amd_gpio_probe: requesting parent IRQ <- probe still running
0.301454 AMDI0010:02 dw_i2c_plat_probe: start <- races here
2.348157 lost arbitration
Add a dependency check that walks ACPI child devices and defers probe
until any referenced GPIO controller is bound.
Fixes: 3812a9e842 ("pinctrl-amd: enable IRQ for WACF2200 touchscreen on Lenovo Yoga 7 14AGP11")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221494
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Hardik Prakash <hardikprakash.official@gmail.com>
Assisted-by: Claude:claude-sonnet-5
Assisted-by: DeepSeek:deepseek-v4-pro
Cc: <stable@vger.kernel.org> # v7.1+
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260718054330.8975-2-hardikprakash.official@gmail.com
In afs_make_call(), there's a race with async call reception and
destruction. If a call is dispatched that doesn't have call->write_iter
set (used to specify the data content for FS.StoreData), then the first
rxrpc_kernel_send_data() will not set MSG_MORE in the msghdr.
Once rxrpc_send_data() queues the last request packet, the response could
come in at any time and cause the call to be completed and put. However,
afs_make_call() will look at the call again to see it ->write_iter should
be handled - something it's only allowed to do if it has its own ref on the
call. Whilst this is the case for synchronous calls, it isn't true for
async calls such as FS.FetchData.
There's also a potential UAF in afs_make_call() in the event that an
asynchronous call is being sent, but the call fails in some way (e.g. it
gets aborted from the server). The problem there is that afs_make_call()
tries to abort a call if the rxrpc send fails, but the asynchronous
notification from rxrpc may have caused the afs_call to be torn down.
generic/650 plays games with randomly taking CPUs offline, and can
interject a significant delay such that the call is deallocated before
afs_make_call() gets to check call->write_iter - and a UAF ensues (caught
by KASAN).
BUG: KASAN: slab-use-after-free in afs_make_call+0x1c90/0x2210 [kafs]
Read of size 8 at addr ffff888035e050e8 by task fsstress/1409
Fix this by making afs_make_op_call() give the op->call its own ref rather
than transferring the caller's ref to it and then dropping the ref when
afs_make_call() returns.
This also means that the afs_make_call() func never loses its ref on the
call now.
Fixes: eddf51f2bb ("afs: Make {Y,}FS.FetchData an asynchronous operation")
Fixes: e49c7b2f6d ("afs: Build an abstraction around an "operation" concept")
Link: https://sashiko.dev/#/patchset/20260702144919.172295-1-dhowells%40redhat.com
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/20260723113452.566619-4-dhowells@redhat.com
cc: Jeffrey Altman <jaltman@auristor.com>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Commit d7a6797e0b ("powerpc: add exit_flags field in pt_regs") added
the exit_flags field to struct pt_regs to pass internal exit control
flags (e.g. _TIF_RESTOREALL) from syscall_exit_prepare() to the
low-level assembly exit path.
However, the field was placed in a way that was visible to userspace
tools such as strace via PTRACE_GETREGS, or caused a struct layout or
size regression observable through ptrace. The field is purely
kernel-internal and must not be exposed beyond the user_pt_regs
boundary.
Move exit_flags into struct thread_info where it is only accessible to
the kernel, and keep it out of the ptrace-visible register window
entirely.
Fixes: d7a6797e0b ("powerpc: add exit_flags field in pt_regs")
Reported-by: Dmitry V. Levin <ldv@strace.io>
Closes: https://lore.kernel.org/all/20260722070155.GA11808@strace.io/
Signed-off-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260723194809.4046600-1-mkchauras@gmail.com
On PowerMac G5 (PPC970, CONFIG_PPC_970_NAP) the system panics shortly
after boot with symptoms including instruction fetch faults, kernel data
access faults, and stack corruption, predominantly on SMP and always
somewhere inside softirq processing.
The PPC970 idle path works by setting _TLF_NAPPING in the current
thread's local flags before entering the MSR_POW nap loop. When any
async interrupt wakes the CPU, nap_adjust_return() is expected to detect
_TLF_NAPPING, clear it, and rewrite regs->NIP to power4_idle_nap_return
so that the interrupt returns cleanly to the caller of power4_idle_nap()
rather than back into the nap spin loop.
DEFINE_INTERRUPT_HANDLER_ASYNC generates the following sequence:
irq_enter_rcu();
____func(regs); /* timer_interrupt / do_IRQ body */
irq_exit_rcu(); /* softirqs run here, irqs re-enabled */
arch_interrupt_async_exit_prepare(regs); /* nap_adjust_return was here */
irqentry_exit(regs, state);
irq_exit_rcu() calls invoke_softirq() -> do_softirq_own_stack(), which
runs softirqs with hardware interrupts re-enabled. A nested async
interrupt can therefore arrive while _TLF_NAPPING is still set. That
nested interrupt reaches nap_adjust_return() in its own
arch_interrupt_async_exit_prepare() call, finds _TLF_NAPPING set, and
redirects *its own* regs->NIP to power4_idle_nap_return. Returning via
that blr with an unrelated LR on the softirq stack jumps to a garbage
address, causing the observed crashes.
The comment that previously lived in arch_interrupt_async_exit_prepare()
even described this exact hazard ("must come before irq_exit()"), but
nap_adjust_return() was placed after irq_exit_rcu() in the macro, so
the protection was never effective.
Fix this by calling nap_adjust_return() inside DEFINE_INTERRUPT_HANDLER_ASYNC
immediately before irq_exit_rcu(), ensuring _TLF_NAPPING is cleared and
regs->NIP is adjusted before any code that can re-enable interrupts or
invoke softirqs runs. Move the explanatory comment into
nap_adjust_return() itself and remove it from arch_interrupt_async_exit_prepare().
Fixes: bee25f97ad ("powerpc: Enable GENERIC_ENTRY feature")
Closes: https://lore.kernel.org/all/87wlvazrdy.fsf@igel.home/
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
Tested-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260707172430.790040-1-mkchauras@gmail.com
During pSeries_setup_arch(), VPA for boot-cpu is first to be
initialized. However later in the boot, smp_setup_cpu() is called for
setting up VPA on boot and secondary cpus that were brought online. This
results in vpa_init() being called twice for boot-cpu and three redundant
H_REGISTER_VPA hcalls being made to the hypervisor.
Fix this by adding an extra condition in smp_set_cpu() to call vpa_init()
only on non boot-cpus.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260708015842.274690-1-vaibhav@linux.ibm.com
Currently pseries_kexec_cpu_down() skips unregistering vpa, slb_shadow and
dtl areas during a crash and kexec shutdown path. It was done to avoid
doing an HCALL while crashing. However recently Anushree reported that
during kernel crash while the kdump kernel was coming up, Hypervisor
reported invalid values for 'vpa.yield_count' while it dispatching L2-KVM
Guest vcpus. The error manifested as debug build Hypervisor assert
triggering to indicate possible VPA corruption.
Looking at the kexec cpu offline path it was discovered that during crash
kernel doesn't unregister the VPA/SLB-Shadow/DTL area with
Hypervisor. Instead it re-allocates and re-registers these areas
for cpus during boot. During kexec boot the previously allocated areas
can get overwritten with new content without hypervisor knowledge. This
creates a small window where while kexec kernel boots and the L2-VCPUs are
being dispatched, Hypervisor may try to read/write to a wrong memory area
which previously belonged to older VPA.
Fix this possible race and memory corruption by updating
pseries_kexec_cpu_down() to also unregister vpa,slb_shadow & dtl areas
during a kernel crash.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Tested-by: Anushree Mathur <anushree.mathur@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260708015802.274271-1-vaibhav@linux.ibm.com
Correct a previous change (see Fixes) which reduced the standby timeout
from 30 to 5 seconds. Increase it to 15 seconds.
I was troubleshooting an error spotted during system suspend:
[ 1217.152867] ata1.00: Entering standby power mode
[ 1222.322948] ata1.00: qc timeout after 5000 msecs (cmd 0xe0)
[ 1222.324010] ata1.00: STANDBY IMMEDIATE failed (err_mask=0x4)
This drive is a Samsung 870 EVO SSD in good SMART standing, and I wasn't
aware of any reason it should be taking so long to standby. The issue is
intermittent, but I observed it sometimes taking 7 seconds to manually
standby. I assume this was interruption of background maintenance after
a power outage.
As a desktop user, I would prefer to wait the extra 2 seconds at suspend
to let the drive finish its business rather than drop the rails from
under it.
The change from 30 to 5 seconds was implicit when switching suspend
from START STOP UNIT to an internal command with no timeout table entry.
No reason was stated for the change.
Fixes: aa3998dbeb ("ata: libata-scsi: Disable scsi device manage_system_start_stop")
Cc: stable@vger.kernel.org
Signed-off-by: Matt Vollrath <tactii@gmail.com>
Assisted-by: Claude:claude-5-fable
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Modify comments to prevent kernel-doc warnings:
- use "/*" for a non-kernel-doc comment
- add a Returns: section for ata_id_major_version()
Warning: include/linux/ata.h:770 Cannot find identifier on line:
*
Warning: include/linux/ata.h:782 function parameter 'id' not described in 'ata_id_sct_data_tables'
Warning: include/linux/ata.h:782 expecting prototype for Word(). Prototype was for ata_id_sct_data_tables() instead
Warning: include/linux/ata.h:820 No description found for return value of 'ata_id_major_version'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Several code paths update the VFS inode size by calling
netfs_resize_file() and cifs_setsize(), but omit the corresponding
fscache_resize_cookie() call, leaving the fscache cookie out of sync
with the actual file size:
- cifs_file_set_size() in inode.c: server-side truncation via setattr
- cifs_do_truncate() in file.c: truncates to zero on O_TRUNC open
- smb2_duplicate_extents() in smb2ops.c: file clone extending EOF
- smb3_simple_falloc() in smb2ops.c: two branches that extend EOF
via write-range and SMB2_set_eof respectively
Since every caller of cifs_setsize() must resize the fscache cookie,
add the call to cifs_setsize() itself, consistent with how
truncate_pagecache() is already consolidated there.
Fixes: 70431bfd82 ("cifs: Support fscache indexing rewrite")
Fixes: 93a4315512 ("cifs: Fix missing set of remote_i_size")
Fixes: 110fee6b9b ("smb: client: fix missing timestamp updates with O_TRUNC")
Fixes: 7a06d3b816 ("smb/client: emulate small EOF-extending mode 0 fallocate ranges")
Cc: stable@vger.kernel.org
Cc: David Howells <dhowells@redhat.com>
Cc: Paulo Alcantara <pc@manguebit.org>
Cc: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: Paulo Alcantara <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When a driver's .get_fec_stats() handler is called and the driver
supports FEC histogram stats, the driver supplies the histogram bin
ranges via a pointer. This pointer is assigned while under the netdev
ops lock in fec_prepare_data(), but the actual data is only read after
the lock is released; so this allows the driver to change the ranges
(e.g. from another .get_fec_stats() call) while the current call chain
is reading them in fec_fill_reply().
Fix this by adding an ethtool core-owned buffer, ranges_buf, to struct
ethtool_fec_hist. Drivers whose ranges are built dynamically (currently
just mlx5) fill ranges_buf and then point the existing ranges pointer at
it, giving ethtool a consistent copy that stays valid after the netdev
ops lock is dropped and later in fec_fill_reply(). Drivers whose ranges
are compile-time constants (bnxt, netdevsim) are unaffected by the
potential race and keep setting the existing ranges pointer to their
constant array, without making copies.
Fixes: cc2f081299 ("ethtool: add FEC bins histogram report")
Signed-off-by: Eric Joyner <eric.joyner@amd.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260723041342.39238-1-eric.joyner@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In rtase_start_xmit(), when the head buffer DMA mapping fails after
rtase_xmit_frags() has mapped all fragments, the error path clears
the fragment descriptors with rtase_tx_clear_range(), which frees
the skb through the last-frag slot and accounts tx_dropped. Control
then falls through to the common error label, which frees the same
skb a second time and counts it again.
Return right after clearing the fragments when the skb owns frags;
the no-frag case still drops through and frees the head skb once.
Fixes: d6e882b89f ("rtase: Implement .ndo_start_xmit function")
Signed-off-by: Yun Lu <luyun@kylinos.cn>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20260721023836.6691-1-luyun_611@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
adt7470_pwm_read() currently ignores failures returned by
pwm1_freq_get(). If the register read fails, the negative error code is
returned through *val while the function itself reports success,
potentially exposing a negative PWM frequency through sysfs.
Fix this by using the cached PWM frequency maintained by the driver,
eliminating the register access from the read path.
Apart from the corrected error propagation and using the cached value,
no functional change is intended.
Fixes: ef67959c42 ("hwmon: (adt7470) Convert to use regmap")
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://lore.kernel.org/r/20260727-adt7470_fixes-v2-6-598e38a46ba6@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The ADT7470_PWM3_AUTO_MASK and ADT7470_PWM4_AUTO_MASK macros are
currently defined with swapped bit values.
According to Table 22 of the ADT7470 datasheet, the Fan Control Mode
Configuration for register 0x69 follows the exact same bit position
layout as register 0x68:
- 0x68 Bit[7] corresponds to BHVR1 (PWM1) -> 0x80
- 0x68 Bit[6] corresponds to BHVR2 (PWM2) -> 0x40
- 0x69 Bit[7] corresponds to BHVR3 (PWM3) -> 0x80
- 0x69 Bit[6] corresponds to BHVR4 (PWM4) -> 0x40
Consequently, PWM3 should use mask 0x80 and PWM4 should use 0x40.
This typo did not cause any functional bugs because these specific
macros are never referenced in the driver code. Instead, the driver
correctly applies the configuration by relying on the modulo parity of
the channel index (e.g., `channel % 2`) to selectively apply either
ADT7470_PWM1_AUTO_MASK (0x80) or ADT7470_PWM2_AUTO_MASK (0x40).
Since the bit layout is identical between the two configuration
registers, the hardware is currently configured correctly.
Fix the macro definitions to reflect the datasheet accurately and
prevent future bugs or confusion during code review and refactoring.
As this is a purely cosmetic fix with no functional impact, a backport
to stable kernels is not necessary.
Fixes: 6f9703d0be ("hwmon: add support for adt7470")
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://lore.kernel.org/r/20260727-adt7470_fixes-v2-4-598e38a46ba6@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When userspace configures 'auto_update_interval' to 0 via sysfs, the
background kthread executes schedule_timeout_interruptible(0), which
returns immediately.
If 'num_temp_sensors' is concurrently or previously set to 0, the
msleep_interruptible() delay inside adt7470_read_temperatures() also
becomes 0. This combination forces the background thread into a tight,
unbounded busy-loop, hogging the CPU and flooding the I2C bus with a
continuous stream of transactions.
Fix this vulnerability by raising the lower limit of the clamp_val in
auto_update_interval_store() from 0 to 500 milliseconds. This guarantees
a reasonable minimum sleep window between sensor updates, protecting the
system from intentional or accidental I2C bus denial of service.
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/r/20260716213252.EACA71F000E9@smtp.kernel.org
Fixes: 89fac11cb3 ("adt7470: make automatic fan control really work")
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://lore.kernel.org/r/20260727-adt7470_fixes-v2-3-598e38a46ba6@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
adt7470_temp_write() and adt7470_pwm_write() update the driver's
cached values (temp_min, temp_max, pwm_input, pwm_enable) before issuing
the corresponding regmap_write(), and never check whether the write
succeeded before committing that update. If the I2C transaction fails,
the function correctly propagates the error to the caller, but the cache
silently keeps the new value, which was never actually applied to the
hardware. Subsequent reads then report a value that does not match the
device state.
Reorder both write paths to update the cache only after a successful
regmap_write(), so the cache always reflects what was actually
written to the hardware.
Fixes: ef67959c42 ("hwmon: (adt7470) Convert to use regmap")
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://lore.kernel.org/r/20260727-adt7470_fixes-v2-2-598e38a46ba6@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
During adt7470_read_temperatures(), the driver temporarily switches
the PWM channels to manual mode, performs the temperature collection,
and then restores the original configuration registers.
However, if an I2C transaction fails at any point after entering manual
mode, the function aborts and returns immediately. This leaves the
configuration registers un-restored, permanently trapping the fans in
manual mode.
Introduce a recovery path to ensure that the original PWM configuration
registers are always restored, even when intermediate I2C operations
fail.
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/r/20260716213252.EACA71F000E9@smtp.kernel.org
Fixes: ef67959c42 ("hwmon: (adt7470) Convert to use regmap")
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://lore.kernel.org/r/20260727-adt7470_fixes-v2-1-598e38a46ba6@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
cifs_file_set_size() calls cifs_setsize() on success, which calls
i_size_write(), updating i_size to the new value. The subsequent
check attrs->ia_size != i_size_read() in both cifs_setattr_unix()
and cifs_setattr_nounix() therefore always evaluates false after a
successful cifs_file_set_size(), making the smp_store_release() of
time_last_write dead code. The truncate path was unprotected against
stale readdir size updates.
Move the stamp to before the cifs_file_set_size() RPC call, guarded
by attrs->ia_size != i_size_read() to exclude no-op same-size
ftruncate(2) calls from stamping time_last_write unnecessarily.
On the error path the stamp remains rather than being restored:
restoring a stale snapshot (prev_tlw) could silently erase a
concurrent _cifsFileInfo_put() close stamp if that close arrived
between the READ_ONCE and the smp_store_release. readdir is
suppressed until the stamp expires, which extends beyond one acregmax
if the caller retries failed truncations. stat() is unaffected: the
cifs_revalidate_dentry_attr() path calls cifs_fattr_to_inode() with
from_readdir=false, which bypasses the time_last_write check in
is_size_safe_to_change() entirely and always writes the authoritative
QUERY_INFO result to i_size.
Remove the now-unreachable stamp from the dead block in both functions.
Fixes: e8a8d54c2d ("cifs: prevent readdir from changing file size due to stale directory metadata")
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The time_last_write stamp was scattered across cifs_close(),
smb2_deferred_work_close(), and the three drain functions in misc.c.
This missed the case where background I/O holds the final reference
after userspace close() returns, and required explicit maintenance at
each close-path site.
Move the smp_store_release() into _cifsFileInfo_put(), immediately
before releasing open_file_lock. This single location covers all
close paths unconditionally: normal close, background I/O dropping the
final reference, deferred close via timer or external drain. The
spinlock's store-release/load-acquire pairing with is_inode_writable()
already provides the ordering guarantee documented in
is_size_safe_to_change().
Remove the now-redundant stamps from cifs_close(),
smb2_deferred_work_close(), and all six stamp sites in the misc.c
deferred-close drain functions.
Fixes: e8a8d54c2d ("cifs: prevent readdir from changing file size due to stale directory metadata")
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Lenovo Legion 7 15ASH11 with AMD RYZEN AI MAX+ 392 (Strix Halo, ACP
7.0) uses Realtek ALC287 series codec and no any DMIC connected by ACP.
All DMICs directly connet with ALC codec.
Without this quirk, Input Device of Gnome Sound settings shows Internal
Stereo Microphone and Digital Microphone by default. In fact, Digital
Microphone of ACP doesn't work due to no connecting with ALC287 codec,
the Internal Stereo Microphone as analog device based on snd_hda_intel
driver can work well.
Add a DMI quirk to override the flag to 0, consistent with the existing
entry for the Lenovo Yoga Pro 7 15ASH11.
Signed-off-by: Jackie Dong <xy-jackie@139.com>
Link: https://patch.msgid.link/20260727041452.16701-1-xy-jackie@139.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Avoid redundant 'strlen()' and use the convenient 'strreplace()'
to simplify 'cifs_fscache_get_super_cookie()'.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
cv1800b_adc_volume_set() serves as the .put callback for the "Internal
I2S Capture Volume" control.
ALSA mixer control callbacks must return 1 when the register value is
modified, 0 if unchanged, or a negative error code on failure. Returning
0 unconditionally causes ALSA core to assume the value was unchanged,
suppressing SNDRV_CTL_EVENT_MASK_VALUE change notifications to userspace
sound servers (e.g. PipeWire/PulseAudio).
Fix this by comparing the new register value with the existing register
value. If unchanged, return 0; otherwise, write the updated value and
return 1.
Fixes: 4cf8752a03 ("ASoC: sophgo: add CV1800B internal ADC codec driver")
Signed-off-by: Surendra Singh Chouhan <kr494167@gmail.com>
Link: https://patch.msgid.link/20260727053804.25599-1-kr494167@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sctp_assoc_add_peer() increments the association's 16-bit transport_count
for every new unique peer. Adding the 65,536th transport wraps the count to
zero.
SCTP sock_diag uses transport_count to reserve the INET_DIAG_PEERS payload,
then copies one sockaddr_storage for every entry in transport_addr_list.
After the wrap, a diagnostic dump reserves an empty payload and writes
8 MiB of peer addresses past the skb tail.
Reject a new unique peer when transport_count has reached U16_MAX. Perform
the check after the existing-peer lookup so a duplicate address continues
to return its existing transport at the limit.
Fixes: 8f840e47f1 ("sctp: add the sctp_diag.c file")
Cc: stable@vger.kernel.org
Signed-off-by: Asim Viladi Oglu Manizada <manizada@pm.me>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20260725032053.521705-1-manizada@pm.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netfs_alloc_folioq_buffer() may leave a partially allocated folio
queue attached to the caller's buffer pointer when it returns an error.
smb3_init_transform_rq() stores the buffer in the request only after
allocation succeeds, so the common error path cannot free a partial
allocation. Store the buffer pointer before checking the return value so
err_free releases it.
Signed-off-by: Yichong Chen <chenyichong@uniontech.com>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
sctp_unpack_cookie() skips cookie expiration checks whenever an
association already exists. This is broader than the exception in
RFC 9260 Section 5.2.4.
For an existing association, Section 5.2.4 permits an expired State
Cookie only when both Verification Tags in the cookie match the current
association. Otherwise, the packet SHOULD be discarded and a Stale
Cookie ERROR MUST be sent.
The broad check lets an expired Action A restart cookie reach
sctp_sf_do_dupcook_a(). In a runtime test with the default 60 second
cookie lifetime, replaying such a cookie after 65 seconds returned a
COOKIE-ACK and restarted the association.
Check cookie expiration unless both Verification Tags match. This
preserves the Action D exception for a lost COOKIE ACK while rejecting
expired cookies in all other cases.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20260723225623.2658868-1-yangyx22@mails.tsinghua.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
br_multicast_leave_group() iterates mp->ports with pp = &p->next in
its fast-leave path. After br_multicast_del_pg() removes p,
continuing the loop advances pp through the deleted entry.
If multicast-to-unicast was enabled, the bridge can hold multiple port
groups for the same port and group with different source MAC
addresses. Once multicast-to-unicast is disabled,
br_port_group_equal() matches those entries by port only. A fast leave
can then delete one entry and continue from its stale next pointer,
leaving mp->ports pointing at a deleted port group.
Fast leave only needs to remove one matching port group. Break after
br_multicast_del_pg() so the loop stops before dereferencing the
removed entry.
Fixes: 6db6f0eae6 ("bridge: multicast to unicast")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zhiling Zou <zhilinz@nebusec.ai>
Signed-off-by: Ren Wei <enjou1224z@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/1cf0898872ef7c72d5f4c0304414a192c6dac591.1784707712.git.zhilinz@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fib6_rule_suppress() drops a suppressed route with ip6_rt_put_flags(),
but leaves res->rt6 pointing at the released rt6_info.
If no later rule supplies a replacement, fib6_rule_lookup() still sees
res.rt6 and returns that stale dst to its caller. A suppressing rule can
therefore leak a released route back to rt6_lookup(), and the next put
hits rcuref_put_slowpath() from dst_release().
Clear res->rt6 when suppressing the route so suppressed lookups fall
through to the null dst instead of reusing the released one.
Fixes: cdef485217 ("ipv6: fix memory leak in fib6_rule_suppress")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zhiling Zou <zhilinz@nebusec.ai>
Signed-off-by: Ren Wei <enjou1224z@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/4b8acb7787d54e440155585dd32ebdf0bef7d122.1784710966.git.zhilinz@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TIPC socket tracepoints dump queue state through tipc_sk_dump(). Most
queue-dump callsites already serialize that walk under the socket lock or
sk->sk_lock.slock, but tipc_poll() calls trace_tipc_sk_poll(...,
TIPC_DUMP_ALL, ...) without holding either lock.
That lets the poll trace path reach tipc_list_dump() and backlog head/tail
dumping while another context dequeues and frees an skb, leaving the trace
helper dereferencing a stale queue entry.
Stop the unlocked poll trace site from requesting queue dumps. Other queue
dump trace callsites keep their existing output under the locking they
already provide, while poll still emits the event itself without walking
live queue members from an unlocked context.
Fixes: b4b9771bcb ("tipc: enable tracepoints in tipc")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Signed-off-by: Ren Wei <enjou1224z@gmail.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/f8119abd5e5ecc400597de667ae9d39656de56d0.1784794294.git.zihanx@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
vxlan: fixes for skb header pulling, cloning, and concurrency in TX path
While working on RTNL-less fill_info for vxlan, Sashiko found annoying
pre-existing issues, adding noise to an already complex work.
This series addresses some of them in VXLAN transmit path,
primarily within route_shortcircuit(), header validation, and neighbour
lookup.
Patch 1 fixes a potential use-after-free in vxlan_xmit() caused by caching
the Ethernet header pointer ('eth') before calling route_shortcircuit(),
which can reallocate skb->head via pskb_may_pull().
Patch 2 calls skb_cow_head() in route_shortcircuit() before modifying the
Ethernet header in-place, preventing packet header corruption when the skb
is cloned (e.g., by packet sockets, tcpdump, or dev_queue_xmit).
Patch 3 replaces direct reads of n->ha in route_shortcircuit() with
neigh_ha_snapshot() to safely snapshot the neighbour hardware address
under seqlock protection, avoiding potential torn reads during
asynchronous updates.
Patch 4 changes route_shortcircuit() to use pskb_network_may_pull() instead
of pskb_may_pull(). Since skb->data points to the MAC header on transmit
(skb_network_offset(skb) == ETH_HLEN), pskb_may_pull() was only checking
6 bytes into the IP header, leaving the remainder un-pulled in non-linear
frags.
Patch 5 applies pskb_network_may_pull() to the remaining transmit-path
header pull checks in arp_reduce(), ND solicitation proxy checks, and
MDB entry lookup, where skb->data similarly points to the Ethernet header.
====================
Link: https://patch.msgid.link/20260723144249.759100-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In vxlan_xmit(), arp_reduce(), and vxlan_mdb_entry_skb_get(), pskb_may_pull() was
being called to verify the availability of network layer headers (ARP, IPv6/ND,
IP/IPv6 MDB keys).
However, during transmit skb->data points to the MAC header, so skb_network_offset(skb)
is ETH_HLEN (14 bytes). Using pskb_may_pull(skb, len) only checks len bytes from skb->data
rather than skb_network_offset(skb) + len, which can leave part of the network header
in non-linear frags.
Replace these remaining pskb_may_pull() calls with pskb_network_may_pull() to properly
account for the MAC header offset.
Fixes: e4f67addf1 ("add DOVE extensions for VXLAN")
Fixes: f564f45c45 ("vxlan: add ipv6 proxy support")
Fixes: 0f83e69f44 ("vxlan: Add MDB data path support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260723144249.759100-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
route_shortcircuit() currently calls pskb_may_pull(skb, sizeof(struct iphdr))
(or ipv6hdr), which checks if bytes are available starting from skb->data.
However, in vxlan_xmit(), skb->data points to the MAC header, so
skb_network_offset(skb) is ETH_HLEN (14 bytes). Using pskb_may_pull(skb, 20)
only checks 20 bytes from skb->data (which is 14 bytes MAC header + 6 bytes of
IP header), leaving the rest of the IP header potentially un-pulled in non-linear
frags. Subsequent dereferences of ip_hdr(skb)->daddr can read beyond the pulled
linear buffer length.
Fix this by using pskb_network_may_pull(), which adds skb_network_offset(skb) to
the length check to ensure the full network header is present in the linear buffer.
Fixes: e4f67addf1 ("add DOVE extensions for VXLAN")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260723144249.759100-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The neighbour hardware address n->ha can be updated asynchronously by the
neighbour subsystem, protected by n->ha_lock seqlock. Reading n->ha without
holding the seqlock loop can lead to torn reads or reading a partially updated
MAC address.
Use neigh_ha_snapshot() in route_shortcircuit() to safely copy n->ha under
read_seqbegin()/read_seqretry() lock protection before using it.
Note that arp_reduce() and neigh_reduce() seem to have the same issue
left for future patches.
Fixes: e4f67addf1 ("add DOVE extensions for VXLAN")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260723144249.759100-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When route_shortcircuit() performs L3 short-circuit routing, it modifies
the Ethernet header of the skb in-place:
memcpy(eth_hdr(skb)->h_source, eth_hdr(skb)->h_dest, dev->addr_len);
memcpy(eth_hdr(skb)->h_dest, n->ha, dev->addr_len);
If the incoming skb is cloned (for example by packet sockets, tcpdump, or
dev_queue_xmit), modifying the Ethernet header without uncloning can corrupt
the packet header for other readers holding a reference to the cloned skb.
Ensure the skb header is writable and unshared by calling skb_cow_head(skb, 0)
prior to updating the Ethernet header. If skb_cow_head() fails, abort short-circuiting
and return false to allow standard packet processing fallback.
Fixes: e4f67addf1 ("add DOVE extensions for VXLAN")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260723144249.759100-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before route_shortcircuit(), the eth header pointer is cached from eth_hdr(skb).
Inside route_shortcircuit(), pskb_may_pull() can be called, which may
reallocate skb->head.
In this case, returning to vxlan_xmit() leaves the cached eth pointer pointing to
freed memory, leading to a use-after-free when dereferencing eth->h_dest.
Fix this by updating eth = eth_hdr(skb) after calling route_shortcircuit().
Fixes: ae88408256 ("VXLAN: Allow L2 redirection with L3 switching")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260723144249.759100-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko reports:
During initialization of the nct6116 chip, the driver sets data->pwm_num
to 5. However, it assigns several NCT6106 register arrays (such as
NCT6106_REG_WEIGHT_DUTY_STEP, NCT6106_REG_WEIGHT_TEMP_SEL, and
NCT6106_REG_WEIGHT_TEMP_*) to data->REG_PWM and data->REG_WEIGHT_TEMP.
These arrays only contain 3 elements.
In nct6775_update_pwm(), the driver iterates up to data->pwm_num. If
data->has_pwm has bits 3 or 4 set (which is structurally possible for
nct6116), the loop attempts to read elements at index 3 and 4 from these
3-element arrays. This results in a global out-of-bounds read, which can
be caught by KASAN.
Furthermore, the driver uses these garbage out-of-bounds values as
hardware register addresses for subsequent read and write operations. This
leads to invalid hardware register access, potentially causing hardware
misconfiguration or system crashes.
The underlying problem is that the chip does support up to five fan
control channels, but only the first three support weight control.
Fix the problem by extending the affected weight register arrays with
zeroed fields. The driver uses zeroed register addresses to determine
if a register is supported or not, and skips accesses for unsupported
registers.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 29c7cb485b ("hwmon: (nct6775) Integrate new model nct6116")
Cc: Björn Gerhart <gerhart@posteo.de>
Cc: Florian Bezdeka <florian.bezdeka@siemens.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Pull misc fixes from Andrew Morton:
"13 hotfixes. All are cc:stable. 11 are for MM. All are singletons -
please see the changelogs for details"
* tag 'mm-hotfixes-stable-2026-07-27-14-18' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
fs/proc/task_mmu: fix PAGEMAP_SCAN written state for PMD holes
mm/hugetlb: fix list corruption in allocate_file_region_entries()
mm: mglru: fix stale batch updates after memcg reparenting
selftest: fix headers in fclog.c
ocfs2: fix boundary check in ocfs2_check_dir_entry() to use buffer offset
mm/percpu-km: fix bitmap overflow and accounting in pcpu_create_chunk()
mm/util: don't read __page_2 for order-1 folios in snapshot_page()
mm/hugetlb: fix swap entry corruption when clearing uffd-wp at fork()
mm: migrate_device: fix pte_pfn/pte_dirty called on non-present PTE
fs/proc/task_mmu: fix PAGEMAP_SCAN written state for unpopulated ptes
userfaultfd: wait on source PMD during UFFDIO_MOVE
lib: test_hmm: use device devt for coherent device range selection
mm/vmstat: fold stranded per-cpu node stats when a node comes online
Sashiko is concerned that reading a PWM frequency multiplier outside
the supported range of [1, 31] might result in bad PWM values written
to the chip. Technically, the chip should never return a value with
the upper 3 bits set, so this should never happen. However, it is
unknown if there are LM63 variants where the upper bits of the register
can be written.
Mask the register value read from the chip to only accept the lower 5 bit
when reading it from the chip to avoid the problem.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Pull keys fixes from Jarkko Sakkinen:
- An unprivileged keyring whose keys collide through the
description-chunk path can drive assoc_array node splitting
into an out-of-bounds slot write. Fix it.
- Fix the DCP trusted keys backend
* tag 'for-next-keys-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
assoc_array: trim the final shortcut word using the current chunk end
keys: make keyring key-chunk byte order agree with keyring_diff_objects()
keys: fix out-of-bounds read in keyring_get_key_chunk()
KEYS: trusted: dcp: fix key_len validation and calc_blob_len() return type
Fix a severe AB/BA deadlock between the Common Clock Framework (CCF)
and the I2C adapter lock, which triggers when an I2C-controlled clock
generator client (like the Si5351) is registered or modified under the CCF.
During an i2c client clock (generator) frequency change, the CCF acquires its global
'prepare_lock' mutex and the driver calls i2c_transfer() to update the client's
chip registers, stalling for the adapter's I2C bus lock.
Concurrently, an independent, parallel transfer on the same bus (e.g., a GPIO
expander handling LEDs) can hold the I2C adapter lock. Inside this parallel
transfer path, jz4780_i2c_set_speed() calls clk_get_rate() on the host
controller's input clock to calculate bus timings. This call attempts to acquire
the blocked CCF 'prepare_lock', creating a circular dependency that freezes
the system.
The jz4780 host controller clock itself is static and never changes at runtime.
However, calling clk_get_rate() inside the active transfer path introduces
an unnecessary dependency on the CCF internal locks.
Eliminate this synchronous clk_get_rate() call from the active transfer
path by caching the static host peripheral clock rate once - inside the private
jz4780_i2c structure during jz4780_i2c_probe(). Update jz4780_i2c_set_speed()
to use this cached value, safely decoupling active I2C transactions from the
CCF internal locks without any risk of stale timings.
Assisted-by web based Google AI (pinpointing the bug and writing the message).
Fixes: ba92222ed6 ("i2c: jz4780: Add i2c bus controller driver for Ingenic JZ4780")
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Cc: <stable@vger.kernel.org> # v4.1+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/2db6fd233aceb7238474e4833f4d25ca681c3ffb.1784492382.git.hns@goldelico.com
When inet_getpeer_v4() or inet_getpeer_v6() fails to allocate a peer entry
under memory pressure or tree size caps, redirect handlers previously fell
back to sending un-rate-limited ICMP/NDISC Redirect messages.
In IPv4, ip_rt_send_redirect() called icmp_send() directly when peer == NULL.
In IPv6, ip6_forward() and ndisc_send_redirect() passed a NULL peer into
inet_peer_xrlim_allow(), which returned true when peer == NULL.
Because ICMP/NDISC Redirects are not part of the default global rate limit
mask (sysctl_icmp_ratemask), sending redirects when peer == NULL creates
an un-rate-limited ICMP packet storm.
Fix this by failing closed in ip_rt_send_redirect(), ip6_forward(), and
ndisc_send_redirect() when peer is NULL.
Fixes: 92d8682926 ("inetpeer: Move ICMP rate limiting state into inet_peer entries.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260724072901.1633601-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
amd_mp2_register_cb() stores the platform I2C context in the MP2 PCI
driver's callback table before the adapter is registered. If
i2c_add_adapter() fails, probe returns and devres frees the context,
but the PCI driver can still dereference the stale pointer from its IRQ
and system-sleep callbacks.
Unregister the callback before returning the adapter registration error.
Fixes: 529766e0a0 ("i2c: Add drivers for the AMD PCIe MP2 I2C controller")
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Cc: <stable@vger.kernel.org> # v5.2+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260721144147.31150-1-mhun512@gmail.com
spacemit_i2c_probe() requests the IRQ before it enables the clocks, resets
the controller and runs init_completion(). If an interrupt is already
pending, the handler runs too early: it reads registers while the clocks
are still off and calls complete() on an uninitialized completion. Request
the IRQ after the controller and completion are initialized, but still
before the adapter is registered.
Fixes: 5ea558473f ("i2c: spacemit: add support for SpacemiT K1 SoC")
Signed-off-by: Linmao Li <lilinmao@kylinos.cn>
Cc: <stable@vger.kernel.org> # v6.15+
Reviewed-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260723021140.2293844-1-lilinmao@kylinos.cn
Sashiko reports:
When send_output_report() calls hid_hw_output_report(), the underlying USB
HID core calls usb_interrupt_msg() which maps this buffer directly for DMA.
When the DMA mapping flushes or invalidates the cacheline, it will corrupt
the adjacent variables (mutex, update_interval) that were modified
concurrently by the CPU. This causes memory corruption due to cacheline
sharing on non-coherent CPU architectures (such as ARM or MIPS). The DMA
API debugging tool (CONFIG_DMA_API_DEBUG) will trigger runtime warnings
for this violation.
Any operation that triggers send_output_report() (like setting a fan speed
or updating the interval) causes the USB DMA mapping. On systems with
non-coherent caches, this structural bug causes immediate and deterministic
memory corruption.
Align the output buffer to ARCH_DMA_MINALIGN to fix the problem.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 53e68c20ae ("hwmon: add driver for NZXT RGB&Fan Controller/Smart Device v2.")
Cc: Aleksandr Mezin <mezin.alexander@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Userspace can read sysfs attributes before driver registration is complete,
immediately after devm_hwmon_device_register_with_info() has been called.
At that time, data->hwmon_dev is not yet initialized. This can trigger
a NULL pointer access since lm90_update_device() and with it
lm90_update_alarms_locked() will be called. This call schedules
report_work and lm90_report_alarms(), which passes the still-NULL
data->hwmon_dev to hwmon_notify_event() and triggers a NULL pointer
dereference.
Fix the problem by only scheduling the report and alert workers
data->hwmon_dev is set.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: f6d0775119 ("hwmon: (lm90) Rework alarm/status handling")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Sashiko reports:
In sht3x_update_client(), the 16-bit temperature and humidity values are
extracted from a stack-allocated byte array using be16_to_cpup(). The
pointers passed to this function are calculated as buf and buf + 3. Since
the difference between the two pointers is an odd number of bytes, at
least one of them is guaranteed to be at an unaligned offset.
This will trigger an alignment fault on strict-alignment architectures
such as ARMv5 or SPARC, resulting in a kernel panic.
Fix the problem by using get_unaligned_be16() instead of be16_to_cpup(),
and put_unaligned_be16() instead of cpu_to_be16().
Fixes: 7c84f7f80d ("hwmon: add support for Sensirion SHT3x sensors")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Coverity reports an out-of-bounds access when reading the minimum alarm
voltage for the VGPIO channel. Add the missing return statement to fix
the problem.
Fixes: cbc29538db ("hwmon: Add driver for LTC4282")
Cc: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Sashiko reports several integer overflow problems in the ina2xx driver
caused by unbounded multiplications and inadequate types for intermediate
calculations.
Specifically:
- In ina2xx_get_value(), the return type is changed from int to long.
Intermediate calculations for current are now performed using 64-bit
types to prevent 32-bit integer overflow before the division by 1000.
- When calculating power in ina2xx_get_value() and
sy24655_average_power_read(), interim values are cast to u64 and clamped
to LONG_MAX. This prevents overflow when regval or accumulator_24 is
multiplied by power_lsb_uW.
- In ina226_alert_to_reg(), the clamping logic is rewritten using min_t().
This safely avoids integer overflows when scaling user-provided values
for shunt voltage, bus voltage, power, and current limits.
Cc: Loic Poulain <loic.poulain@oss.qualcomm.com>
Fixes: ab7fbee452 ("hwmon: (ina2xx) Fix various overflow issues")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
pmbus_notify() calls sysfs_notify() and kobject_uevent() on the i2c
client's kobject, but the alarm attributes live on the hwmon class
device registered by pmbus_do_probe(). Notifying the parent i2c device
is a no-op for both poll(POLLPRI) waiters and udev listeners: the named
attribute does not exist on that kobject.
Notify the hwmon device instead, so poll() wakes up and "change"
uevents fire on the inX_alarm/tempX_alarm attributes when SMBALERT#
reports a fault.
Fixes: f469bde9af ("hwmon: (pmbus/core) Notify hwmon events")
Cc: stable@vger.kernel.org # v6.4+
Signed-off-by: Vincent Jardin <vjardin@free.fr>
Link: https://lore.kernel.org/r/20260723-fix_hwmon_notify_v1-v1-1-5a24c528686d@free.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Unlike NCT6106, NCT6116 only has three temperature registers, and with
it only three temperature source and temperature source configuration
registers. The register addresses match those of NCT6106 and can be
re-used.
The code used a separate array to list the temperature source registers
for NCT6116, but used the size of the NCT6106 register array to set
the number of registers. The NCT6106 register array provides six addresses,
while the temperature source register array for NCT6116 only provides three
addresses. This causes a KASAN report.
BUG: KASAN: global-out-of-bounds in nct6775_probe+0x936/0x46f0 [nct6775]
Read of size 2 at addr ffffffffc19561a6 by task modprobe/954
...
Call Trace:
dump_stack+0x7d/0xa7
print_address_description.constprop.0+0x1c/0x220
? __kasan_kmalloc.constprop.0+0xc9/0xd0
? __kmalloc_node_track_caller+0x194/0x5b0
? nct6775_probe+0x936/0x46f0 [nct6775]
? nct6775_probe+0x936/0x46f0 [nct6775]
...
Fix the problem by hard-coding the number of temperature and temperature
configuration registers to three for NCT6116. Drop the unnecessary
NCT6116_REG_TEMP_SOURCE array and re-use NCT6106_REG_TEMP_SOURCE.
Reported-by: Florian Bezdeka <florian.bezdeka@siemens.com>
Closes: https://lore.kernel.org/linux-hwmon/57cfc3fa-d4e9-4c10-8aa7-4ad0af7ebebe@roeck-us.net/T/#t
Fixes: 29c7cb485b ("hwmon: (nct6775) Integrate new model nct6116")
Cc: Björn Gerhart <gerhart@posteo.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
SPI host transfers could intermittently stall with spi_transfer timeouts.
The TXFULL condition was checked only once in cdns_transfer_one() before
cdns_spi_process_fifo(), so if the FIFO became full again during refill,
writes could be dropped and the transfer would never complete.
Move the TXFULL busy-wait into the TX path of cdns_spi_process_fifo() so
the 10µs back-off is applied per FIFO entry during filling, ensuring
forward progress and eliminating spurious timeouts.
Restrict the delay to host mode using spi_controller_is_target(), the
controller is passed into cdns_spi_process_fifo() so the check is made at
the point of use. In target mode this delay must not run as it causes the
target to miss its transfer window and corrupt data.
Fixes: 49530e6411 ("spi: cadence: Add usleep_range() for cdns_spi_fill_tx_fifo()")
Signed-off-by: Srikanth Boyapally <srikanth.boyapally@amd.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://patch.msgid.link/20260720125510.60166-1-srikanth.boyapally@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SINEGAIN2_REG case in cali_reg_update() references t->sin_gn[]
rather than t->sin_gn2[], causing the second pilot tone gain
calibration to be programmed with the wrong register address.
These are distinct fields in struct fct_param_address and are
populated from separate firmware parameters by the parser in
tas2781-fmwlib.c.
Fixes: 84d6a465f2 ("ASoC: tas2781: Support dsp firmware Alpha and Beta seaies")
Signed-off-by: wangdicheng <wangdicheng@kylinos.cn>
Link: https://patch.msgid.link/20260720081616.631413-1-wangdich9700@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Charles Keepax <ckeepax@opensource.cirrus.com> says:
Currently there exists a couple races that can result in the DAPM graph
coming up in a state that doesn't match the hardware with respect to
SDCA jack detection. This series fixes these up by adding a component
level fixup_controls helper into the asoc core and shuffling around the
IRQ requests from the SDCA side.
The core creates DAPM widgets/routes quite a long time before
it creates the associated ALSA control, and the jack detection
IRQ is currently registered in component probe. At the time of
component probe, the DAPM widgets exist, shortly after this the
DAPM routes are added. At the time the DAPM routes are added the
register value for the control is checked and the appropriate path
is connected. The existing handling in the SDCA jack IRQ handles
the case the control doesn't exist and updates the registers
directly, which works until the DAPM routes are added. After the
routes are added the DAPM graph has already set connected on a
particular DAPM path, which will not be updated until an IRQ is
received when the control is present. Thus those updates are
usually not reflected in the resulting DAPM graph which can lead
to the audio path being erroneously powered on/off.
Link: https://patch.msgid.link/20260721143636.361814-1-ckeepax@opensource.cirrus.com
Now that the IRQs are always registered after all the ALSA
controls are created it is possible to search for the control
at the point the IRQ is requested. Move the control search out
of the IRQ handler and do it at IRQ request time.
This also fixes a potential issue when the card was torn down
and reprobed without destroying the codec device, the kctl
pointer stored by the IRQ handler would not be updated to the
new control on the second probe.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260721143636.361814-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently there are some race conditions around the boot of SDCA
jack detection. The core creates DAPM widgets/routes quite a
long time before it creates the associated ALSA control, and
the jack detection IRQ is currently registered in component
probe. At the time of component probe, the DAPM widgets exist,
shortly after this the DAPM routes are added. At the time the DAPM
routes are added the register value for the control is checked
and the appropriate path is connected. The existing handling
in the SDCA jack IRQ handles the case the control doesn't exist
and updates the registers directly, which works until the DAPM
routes are added. After the routes are added the DAPM graph has
already set connected on a particular DAPM path, which will not
be updated until an IRQ is received when the control is present.
Thus those updates are usually not reflected in the resulting
DAPM graph which can lead to the audio path being erroneously
powered on/off.
Switch to the new fixup_controls callback to register the
IRQs, this is guaranteed to run after all the controls have
been created. Which means we can avoid the aforementioned race
condition and as a bonus no longer need to concern ourselves
with a case where the IRQ handler runs and the ALSA control
is unavailable.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260721143636.361814-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A card level fixup_controls callback was added in:
commit df4d27b19b ("ASoC: Introduce 'fixup_controls' card method")
This allowed the machine driver to take actions after all the
card controls have been added. However, there are times when a
codec driver would also want to do things like obtain references
to controls for later use, which require all the controls to be
present. Add a component level fixup_controls callback, echoing
the card level option.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260721143636.361814-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, the IRQ data (attached Entity/Control/etc) is populated
as the IRQ is requested. However, this can cause issues as
occasionally the setup process wants to access specifics of
an IRQ before the IRQ is actually enabled. To facilitate this
cache all the IRQ data during sdca_irq_populate_early() and make
sdca_irq_populate() simply request the outstanding IRQs. This
also has the advantage that sdca_irq_populate() can now just
iterate through the IRQ array which is much smaller/faster than
going through every Entity in the Function for Controls.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260721143636.361814-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SDCA IRQs are split into two groups, those registered at bus probe
time (basically just FDL) and those registered at component time.
There currently exists only a single cleanup function, if the FDL IRQ
is freed at component time, then nothing would re-register it if the
component is probed again. But the IRQs depending on a component need
to be freed if the card is destroyed so they can't use stale
components.
Split the clean up into two functions one for the component level and
one for the bus level.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260721143636.361814-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ublk_ctrl_add_dev() memcpy()s the userspace ublksrv_ctrl_dev_info into
ub->dev_info and then fixes up the fields the driver owns, but misses
->state and ->ublksrv_pid.
A device added with ->state = UBLK_S_DEV_LIVE passes the
"->state != UBLK_S_DEV_DEAD" test that ublk_stop_dev_unlocked() uses as its
proxy for "a disk is attached", while ->ub_disk is still NULL, so DEL_DEV
right after ADD_DEV oopses in del_gendisk(). UBLK_S_DEV_QUIESCED plus
UBLK_F_USER_RECOVERY dies one step earlier, in ublk_force_abort_dev(). A
poisoned ->state also gets START_USER_RECOVERY and the char device
read/write path onto a device that was never started, and wedges START_DEV
at -EEXIST. A poisoned ->ublksrv_pid just makes GET_DEV_INFO report an
unrelated task as the ublk server.
Reset both after the memcpy(), as ublk_detach_disk() does. Userspace only
ever reads these back, so correcting them silently breaks nothing.
ADD_DEV has copied ->state in unsanitized since ublk was merged, but back
then it was harmless: the gendisk was allocated during ADD_DEV, and both
teardown and the START_DEV -EEXIST check keyed off disk_live() rather than
->state. The oops became reachable once the disk allocation moved to
START_DEV and those checks switched to ->state.
Fixes: 6d9e6dfdf3 ("ublk: defer disk allocation")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://patch.msgid.link/20260726145025.1507383-1-tom.leiming@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull erofs fixes from Gao Xiang:
"Fix a regression in page cache sharing which can cause a NULL pointer
dereference, and limit LZMA stream memory usage on systems with many
CPUs.
- Keep a valid f_path for page cache sharing to fix a recent
mincore() NULL pointer dereference
- Limit LZMA stream pool size when too many processors are available
- Sync up with Hongbo Li's latest email address"
* tag 'erofs-for-7.2-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: cap LZMA stream pool size
erofs: ensure valid f_path for page cache sharing
MAINTAINERS: update Hongbo Li's email address
Pull pin control fixes from Linus Walleij:
"The most interesting commit is the S4 fix for AMD, which probably is
helpful to a whole bunch of important machines.
- Wakeup nits on the Qualcomm SC8280XP
- Double-free issues on the device tree parsing error path
- Fixup of the S4 sleep state handling on AMD pin control
- Missing Kconfig select REGMAP_MMIO for the Microchip driver leading
to compile stalls
- Missing Kconfig select GENERIC_PINCONF for the Bitmain BM1880
leading to compile stalls"
* tag 'pinctrl-v7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: bm1880: add missing select GENERIC_PINCONF
pinctrl-amd: Don't clear S4 wake bits at probe
pinctrl: microchip-sgpio: add missing select REGMAP_MMIO
pinctrl: devicetree: don't free uninitialized dev_name on error path
pinctrl: qcom: sc8280xp: Add missing wakeup entries for GPIO143/151
pinctrl: qcom: Unconditionally mark gpio as wakeup enable
vmw_external_bo_copy() trusts caller-supplied offsets, strides, and
heights and operates on imported dma-buf vmaps:
- The equal-stride memcpy() bound was clamped after subtracting the
offsets from dst_size and src_size; an offset larger than the BO
size wraps the unsigned subtraction to a huge value and the
resulting memcpy() runs off the end of the vmap. dst_stride *
height is also a u32 multiplication that can overflow.
- The non-equal-stride row-by-row path had no bound at all. The
loop touches bytes through offset + (height - 1) * stride +
width_in_bytes, with only a WARN_ON(dst_stride < width_in_bytes),
and could likewise step past the end of either mapping.
The offsets and strides are derived from STDU/SOU plane state, so a
configured CRTC submitting a crafted atomic commit on an imported
framebuffer can reach this path.
Validate the exact row-copy endpoint against each BO's size up front
using check_mul_overflow() and check_add_overflow(). Use the bulk
memcpy() path only when width_in_bytes covers the whole stride;
otherwise copy one row at a time so partial-row updates near the bottom
of a framebuffer remain valid. Also reject zero strides and stride <
width_in_bytes, both of which the row-by-row path cannot represent
safely.
Fixes: 50f1199250 ("drm/vmwgfx: Fix prime with external buffers")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4.7
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Link: https://patch.msgid.link/20260505222728.519626-13-zack.rusin@broadcom.com
vmw_shader_define() validates the user-supplied shader window against
its backing buffer with
(u64)buffer->tbo.base.size < (u64)size + (u64)offset
drm_vmw_shader_create_arg::offset is __u64 in the uapi; when it is
near U64_MAX the unsigned addition wraps and the resulting tiny value
passes the check. The unbounded offset is then stored in
res->guest_memory_offset and forwarded to host SVGA shader-create
commands.
Use check_add_overflow() to detect the wrap and compare the resulting
endpoint against the buffer size.
Fixes: 668b206601 ("drm/vmwgfx: Stop using raw ttm_buffer_object's")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4.7
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Link: https://patch.msgid.link/20260505222728.519626-12-zack.rusin@broadcom.com
vmw_validation_add_resource() calls hash_add_rcu() only when
ctx->sw_context is non-NULL, but the doomed-resource error path calls
hash_del_rcu() unconditionally. The validation contexts declared with
DECLARE_VAL_CONTEXT(_, NULL, 0) in vmwgfx_kms.c, vmwgfx_scrn.c,
vmwgfx_stdu.c and vmwgfx_execbuf.c consequently reach a delete for a
node that was never added to any hash chain.
That is harmless today, but only incidentally so. hash_del_rcu() is
hlist_del_init_rcu(), which is guarded by hlist_unhashed(), and
vmw_validation_mem_alloc() hands out memory from __GFP_ZERO pages that
are never recycled within a context's lifetime, so
node->hash.head.pprev is always NULL and the delete does nothing.
Neither property is apparent at the call site, and the asymmetry with
the add side invites a real bug the first time either one changes.
Mirror the condition from the add side so the node is only unlinked
when it was actually linked. No functional change.
Assisted-by: Claude:claude-opus-4.7
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Link: https://patch.msgid.link/20260505222728.519626-11-zack.rusin@broadcom.com
vmw_cursor_plane_atomic_check() bounds cursor width and height only
on the legacy update path; the SVGA_CAP2_CURSOR_MOB path -- the
default on modern hosts -- accepts any size. When the requested size
exceeds SVGA_REG_CURSOR_MAX_DIMENSION or SVGA_REG_MOB_MAX_SIZE,
vmw_cursor_mob_get() returns -EINVAL and leaves vps->cursor.mob NULL.
Its return value is then discarded in vmw_cursor_plane_prepare_fb(),
so the subsequent vmw_cursor_update_mob() calls
vmw_bo_map_and_cache(NULL) and oopses inside
vmw_bo_map_and_cache_size() on the tbo.base.size load.
Reachable from any DRM master via DRM_IOCTL_MODE_CURSOR2 with a
sufficiently large width or height (e.g. cursor_max_dim + 1).
Reject oversized cursors in atomic_check for both MOB-backed cursor
update types. The MOB byte-size limit only applies to the
SVGA_CAP2_CURSOR_MOB path (vmw_cursor_mob_size() returns 0 for
GB_ONLY); compute the required MOB size in 64-bit to avoid overflow
when very large dimensions are requested.
In prepare_fb only call vmw_cursor_mob_get()/_map() for
VMW_CURSOR_UPDATE_MOB -- the GB_ONLY path uses bo->map.virtual
directly and would otherwise be silently downgraded to NONE on hosts
without SVGA_CAP2_CURSOR_MOB (where vmw_cursor_mob_get() always
returns -EINVAL). Degrade the update to NONE if vmw_cursor_mob_get()
or vmw_cursor_mob_map() fails so the update path does not run with a
NULL backing MOB.
Fixes: 965544150d ("drm/vmwgfx: Refactor cursor handling")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4.7
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Link: https://patch.msgid.link/20260505222728.519626-10-zack.rusin@broadcom.com
Two paths through vmw_vkms_init() can leave vmw->crc_workq NULL while
still leaving the rest of the driver in a state that calls
vmw_vkms_cleanup() at module unload:
1. vmw_host_get_guestinfo(GUESTINFO_VBLANK, ...) failing or
returning an oversized buffer -- the common case on hosts
without a VBLANK guestinfo entry -- early-returned before the
workqueue allocation.
2. alloc_ordered_workqueue() returning NULL on memory pressure.
vmw_vkms_cleanup() then calls destroy_workqueue(NULL), which
dereferences wq->name and panics.
Fix the first case by removing the early return: vmw->vkms_enabled
is already false on the rpci-failure path so no work will ever be
queued, and allocating the workqueue unconditionally keeps the
control flow simple. Fix the second case by guarding the cleanup
with a NULL check, since alloc_ordered_workqueue() can still fail
under low memory.
Fixes: 7b0062036c ("drm/vmwgfx: Implement virtual crc generation")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4.7
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Link: https://patch.msgid.link/20260505222728.519626-9-zack.rusin@broadcom.com
vmw_cmd_dma() locates the DMA suffix at
(unsigned long) &cmd->body + header->size - sizeof(*suffix)
without checking that header->size is large enough to contain both
cmd->body and the suffix. An undersized header makes the suffix
pointer underflow back into the previous command in the bounce
buffer. The verifier later writes suffix->maximumOffset, clobbering
verified fields of an already-relocated earlier command -- a TOCTOU
on the device-visible command stream that lets one command rewrite
another's GMR id, surface id, or other authenticated fields.
Reject the command if the body is too small for the suffix to fit.
Fixes: 4e4ddd4777 ("drm/vmwgfx: Fix queries if no dma buffer thrashing is occuring.")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4.7
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Link: https://patch.msgid.link/20260505222728.519626-8-zack.rusin@broadcom.com
vmw_cmd_draw() computes
maxnum = (header->size - sizeof(cmd->body)) / sizeof(*decl);
where header->size is u32 and is taken straight from the user-supplied
command stream. When header->size is less than sizeof(cmd->body) the
unsigned subtraction wraps to nearly 4 GiB, producing a huge maxnum.
Any user-controlled cmd->body.numVertexDecls then passes the bound and
the loop dereferences decl[i] far past the end of the kernel command
bounce buffer, producing an out-of-bounds read of kernel memory.
Reject undersized headers up front.
Fixes: 7a73ba7469 ("drm/vmwgfx: Use TTM handles instead of SIDs as user-space surface handles.")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4.7
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Link: https://patch.msgid.link/20260505222728.519626-7-zack.rusin@broadcom.com
ttm_prime_fd_to_handle() returns -ENOSYS when the imported fd's
dma_buf->ops do not match the ttm_object_device's ops, but does so
without releasing the reference acquired by dma_buf_get(). Any
unprivileged renderD client passing a non-vmwgfx prime fd through the
DRM_VMW_GB_SURFACE_REF{,_EXT} path leaks one dma_buf reference per
call and indefinitely pins the foreign exporter's GEM resources.
Funnel the error path through the existing dma_buf_put() so the
reference is always dropped.
Fixes: 65981f7681 ("drm/ttm: Add a minimal prime implementation for ttm base objects")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4.7
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Link: https://patch.msgid.link/20260505222728.519626-6-zack.rusin@broadcom.com
vmw_fence_fifo_down() drops fman->lock to wait on a fence and, on
timeout, mutates fman->fence_list via list_del_init() and signals
the fence without re-acquiring the lock. __vmw_fences_update() walks
and removes entries from the same list under fman->lock from any
other waiter, the fence-IRQ thread, or vmw_fences_update(), so the
unlocked list_del_init() can corrupt the list head.
Re-take fman->lock before manipulating fence->head and use
dma_fence_signal_locked(). Wrap the locked signalling in
dma_fence_begin_signalling() / dma_fence_end_signalling() so the
lockdep annotation that dma_fence_signal() previously provided is
preserved (the same pattern as __vmw_fences_update()).
dma_fence_put() is moved outside the lock to avoid a recursive
acquire from vmw_fence_obj_destroy(), which also takes fman->lock.
Fixes: ae2a104058 ("vmwgfx: Implement fence objects")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4.7
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Link: https://patch.msgid.link/20260505222728.519626-5-zack.rusin@broadcom.com
vmw_bo_dirty_transfer_to_res() and vmw_bo_dirty_clear() compute the
intersection of a resource's page range with the BO's tracked dirty
range, but clamp res_end against dirty->end with max() instead of
min(). When dirty->end exceeds the resource end, the loop walks past
the resource's pages, calls vmw_resource_dirty_update() for ranges
owned by other resources sharing the same backing MOB and clears
their pending dirty bits via bitmap_clear(). The result is silent
loss of writeback for unrelated resources whenever two resources
share a MOB.
Use min() in both functions so the loop is bounded to the
intersection of the resource and dirty ranges.
Fixes: b7468b15d2 ("drm/vmwgfx: Implement an infrastructure for write-coherent resources")
Fixes: 965544150d ("drm/vmwgfx: Refactor cursor handling")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4.7
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Link: https://patch.msgid.link/20260505222728.519626-4-zack.rusin@broadcom.com
vmw_cmd_dx_bind_query() unconditionally dereferences
sw_context->dx_ctx_node->ctx. Userspace can trigger a NULL pointer
dereference from any render-node fd by submitting an execbuf with
dx_context_handle == SVGA3D_INVALID_ID and a SVGA_3D_CMD_DX_BIND_QUERY
opcode in the command stream: dx_ctx_node is left NULL and the kernel
oopses on the assignment. The same NULL is then re-read in
vmw_resources_reserve() via vmw_context_get_dx_query_mob().
All sibling DX handlers fail-close on a missing dx_ctx_node using
VMW_GET_CTX_NODE(). Use the same pattern here, returning -EINVAL up
front before any relocation state is published.
Fixes: 9c079b8ce8 ("drm/vmwgfx: Adapt execbuf to the new validation api")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4.7
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Link: https://patch.msgid.link/20260505222728.519626-3-zack.rusin@broadcom.com
Two sites in vmwgfx_resource.c assign boolean literals to
res->guest_memory_size, which is an unsigned long allocation-size
field; the intended target is the adjacent res->guest_memory_dirty
bitfield. After the assignments the field holds 0 or 1 instead of
the resource's MOB allocation size:
- vmw_resource_release() writes 0 (false), and
- vmw_resource_unbind_list() writes 1 (true).
Subsequent revalidation paths read guest_memory_size when computing
the dirty page range (vmw_bo_dirty_transfer_to_res()) and the buffer
allocation size (vmw_resource_buf_alloc()), producing zero-length
walks or wrap-around ranges that read or write past the MOB bitmap.
The dirty-tracking intent of the original code (mark the resource as
dirtied since the last sync) is also lost, since guest_memory_dirty
is never updated.
Rename both assignments to guest_memory_dirty.
Fixes: 668b206601 ("drm/vmwgfx: Stop using raw ttm_buffer_object's")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4.7
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Ian Forbes <ian.forbes@broadcom.com>
Link: https://patch.msgid.link/20260505222728.519626-2-zack.rusin@broadcom.com
Add ath12k_dp_peer_fixup_peer_id() and call it from the
HTT_T2H_MSG_TYPE_MLO_RX_PEER_MAP handler. For devices where the
firmware allocates the MLD peer ID, this is the point at which
all data structures that were left with ATH12K_MLO_PEER_ID_PENDING
or ATH12K_MLO_PEER_ID_INVALID get their real ID:
- dp_peer->peer_id is updated and the dp_peer is published into
dp_hw->dp_peers[];
- every existing dp_link_peer in dp_peer->link_peers[] gets its
ml_id set to the same value;
- ahsta->ml_peer_id is updated to the same value so peer_assoc,
sta_state and cleanup paths see a consistent ID.
Devices with host_alloc_ml_id == true also receive the same HTT
event, but the firmware-reported ID always matches the
host-allocated one and everything has already been populated by
ath12k_dp_peer_create(); Skips the helper entirely on those devices.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221039
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260720-ath12k-fw-allocated-ml-peer-id-v2-8-630632758a80@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
For chips with host_alloc_ml_id=true (QCN9274 etc.), the host allocates
the MLD peer ID up front; ath12k_dp_peer_create() publishes the dp_peer
into dp_hw->dp_peers[] using that ID immediately. WCN7850/QCC2072 does
not work that way: the firmware picks the ID and only tells the host
afterwards via HTT_T2H_MSG_TYPE_MLO_RX_PEER_MAP, so the publication has
to be delayed until the event arrives.
Introduce ATH12K_MLO_PEER_ID_PENDING (0xFFFE) as a sentinel for "is_mlo,
but ID not yet known". On the firmware-allocates path:
- ath12k_mac_op_sta_state(NOTEXIST->NONE) skips ath12k_peer_ml_alloc()
and stores PENDING in ahsta->ml_peer_id and dp_params.peer_id;
- ath12k_dp_peer_create() skips dp_peer registration until a real ID is
known;
- ath12k_peer_create() leaves peer->ml_id at INVALID so consumer sites
do not treat PENDING as a real ID;
- ath12k_peer_ml_free() and ath12k_mac_dp_peer_cleanup() skip the
dp_peers[] write and the free_ml_peer_id_map clear when
host_alloc_ml_id is false or the ID is still PENDING.
The HTT handler change that resolves the PENDING ID is added in a
follow-up patch.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260720-ath12k-fw-allocated-ml-peer-id-v2-7-630632758a80@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
ath12k_peer_assoc_h_mlo() unconditionally sets ml->peer_id_valid and copies
ahsta->ml_peer_id (with the ATH12K_PEER_ML_ID_VALID bookkeeping bit masked
off) into the WMI_PEER_ASSOC_CMDID ML params, which causes
ath12k_wmi_send_peer_assoc_cmd() to set ATH12K_WMI_FLAG_MLO_PEER_ID_VALID.
This needs to be gated on chips where the firmware allocates the MLD peer
ID:
- WCN7850/QCC2072 firmware always picks the ID itself and does not honor
a host-supplied one, so the value would be silently ignored anyway;
- QCC2072 firmware additionally crashes during MLO disconnect when
ATH12K_WMI_FLAG_MLO_PEER_ID_VALID was set in the preceding peer assoc,
so the bit must not be sent at all.
Branch on ah->host_alloc_ml_id:
- When true (QCN9274 etc.), behavior is unchanged: peer_id_valid is set
and the raw ahsta->ml_peer_id (without the VALID bit) is sent down.
- When false (WCN7850, QCC2072), peer_id_valid stays unset and
ml_peer_id is sent as 0. The firmware ignores both fields and reports
the ID it allocated through HTT_T2H_MSG_TYPE_MLO_RX_PEER_MAP.
The early-return on ahsta->ml_peer_id == ATH12K_MLO_PEER_ID_INVALID only
applies on the host-alloc path, since on the firmware-alloc path the value
is ATH12K_MLO_PEER_ID_PENDING here, not INVALID.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260720-ath12k-fw-allocated-ml-peer-id-v2-6-630632758a80@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Different ath12k devices diverge on who allocates MLD peer id:
WCN7850/QCC2072 have the firmware allocate it and notify the host via
HTT_T2H_MSG_TYPE_MLO_RX_PEER_MAP event; While others let the host allocate
it and pass it down through WMI_PEER_ASSOC_CMDID with
ATH12K_WMI_FLAG_MLO_PEER_ID_VALID set.
Currently ath12k host allocates this ID and sends it to firmware by
default for all devices. This breaks WCN7850/QCC2072, because the host
maintained ID may be different from the firmware-allocated one.
Consequently data path may fail to find the dp peer and drop some received
packets. From user point of view, this results in bugs reported in [1] or
the 4-way handshake timeout issue.
Add host_alloc_ml_id flag to struct ath12k_hw_params (and a copy on struct
ath12k_hw for hot-path access) so subsequent patches can branch on it. Set
true for QCN9274/IPQ5332/IPQ5424, false for WCN7850/QCC2072. The flag will
be consumed by subsequent patches.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221039 # 1
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260720-ath12k-fw-allocated-ml-peer-id-v2-5-630632758a80@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Firmware on chips that allocate the MLD peer ID itself (WCN7850 and
QCC2072) reports the assignment back to the host through
HTT_T2H_MSG_TYPE_MLO_RX_PEER_MAP. The message carries the chosen
MLD peer id, the MLD MAC address etc.
Add the message type, the on-the-wire struct, the field masks and a
handler that parses them out. The host-side state update (publishing the
dp peer into ath12k_dp_hw::dp_peers[], propagating the ID to
ath12k_dp_link_peer::ml_id and ath12k_sta::ml_peer_id) is added in a
follow-up patch;
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260720-ath12k-fw-allocated-ml-peer-id-v2-4-630632758a80@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Several pieces of host bookkeeping for MLD peer IDs encode the
same fact in different ways:
- ath12k_sta::ml_peer_id stores the raw ID in [0, ATH12K_MAX_MLO_PEERS);
- ath12k_dp_peer::peer_id, ath12k_dp_link_peer::ml_id and the index used
on ath12k_dp_hw::dp_peers[] always carry the ATH12K_PEER_ML_ID_VALID
bit (BIT(13)) when the ID is real;
- WMI_MLO_PEER_ASSOC_PARAMS::ml_peer_id sent down to firmware is
raw, without the bookkeeping bit.
The mismatch leaks into call sites that have to remember to OR
the bit in (ath12k_peer_create(), ath12k_mac_op_sta_state()) or
remember not to (ath12k_peer_assoc_h_mlo()).
Make ath12k_sta::ml_peer_id carry the VALID bit when valid, the same
way ath12k_dp_peer::peer_id and ath12k_dp_link_peer::ml_id do:
- ath12k_peer_ml_alloc() OR-s the bit in once on the way out;
the internal bitmap stays raw [0, ATH12K_MAX_MLO_PEERS);
- ath12k_peer_create() and ath12k_mac_op_sta_state() drop the
explicit OR;
- ath12k_peer_assoc_h_mlo() masks the bit off when populating
the WMI ml_peer_id;
While there, introduce ath12k_peer_ml_free() to mirror
ath12k_peer_ml_alloc(), which helps avoid code duplication.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260720-ath12k-fw-allocated-ml-peer-id-v2-3-630632758a80@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
ath12k_bss_assoc(), ath12k_mac_station_assoc() and
ath12k_sta_rc_update_wk() all open-code the same sequence: reinit the
peer_assoc_done completion, send the peer assoc WMI command, then wait
for the firmware confirmation event. The reinit_completion() was buried
in ath12k_peer_assoc_prepare(), far from the wait_for_completion_timeout()
that consumes it, making the reinit/send/wait sequence hard to follow,
and the three open-coded copies are easy to get out of sync.
Move the sequence into a new helper ath12k_mac_peer_assoc() and call it
from all three sites. The reinit, send and wait now live together so the
completion's lifecycle is easy to read.
While at it, ath12k_sta_rc_update_wk() previously warned but still
waited the full timeout when the peer assoc command failed to send. Now
a send failure returns immediately and skips the pointless 1 second
wait, matching the other two callers.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260720-ath12k-fw-allocated-ml-peer-id-v2-2-630632758a80@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
ath12k_mac_dp_peer_cleanup() clears the ML peer ID slot on the
free_ml_peer_id_map bitmap by indexing it with dp_peer->peer_id. That is
wrong: dp_peer->peer_id for an MLO peer always carries the
ATH12K_PEER_ML_ID_VALID bit (BIT(13)), so clear_bit() is invoked with
index >= 0x2000, which is far outside the bitmap of ATH12K_MAX_MLO_PEERS
(256) bits and corrupts memory adjacent to ah->free_ml_peer_id_map. The
intended bitmap entry also never gets cleared, so subsequent
ath12k_peer_ml_alloc() calls eventually run out of IDs.
The ID without the VALID bit is what ath12k_peer_ml_alloc() returned and
is stored in ahsta->ml_peer_id. Use that instead.
While there, also reset ahsta->ml_peer_id to ATH12K_MLO_PEER_ID_INVALID so
the bitmap and ahsta->ml_peer_id stay in sync.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3
Fixes: ee16dcf573 ("wifi: ath12k: Define ath12k_dp_peer structure & APIs for create & delete")
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260720-ath12k-fw-allocated-ml-peer-id-v2-1-630632758a80@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
The HP Dragonfly Folio G3 2-in-1 also ships with PCI SSID 103c:8a05.
On this unit the ALC245 codec reports subsystem id 103c:8a06 - the SSID
that is already covered by commit 0a10faad5c ("ALSA: hda/realtek: add
quirk for HP Dragonfly Folio G3 2-in-1") - while the PCI SSID that
SND_PCI_QUIRK matches against is 103c:8a05:
snd_hda_codec_alc269 ehdaudio0D0: ALC245: picked fixup for PCI SSID 103c:8a05
cs35l41-hda spi1-CSC3551:00-cs35l41-hda.0: CS35L41 Bound - SSID: 103C8A06
The existing entry therefore never applies here, the four CS35L41
amplifiers on SPI are not registered and the internal speakers stay
silent.
Add the same fixup that the 8a06 entry uses: the four amplifiers bind
and the speaker mute LED (codec GPIO 0x04) works.
Signed-off-by: Michael Diesen <michael.diesen@posteo.de>
Link: https://patch.msgid.link/20260727091920.4634-1-michael.diesen@posteo.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Lenovo Legion 7 15ASH11 with AMD RYZEN AI MAX+ 392 (Strix Halo, ACP
7.0) uses Realtek ALC287 series codec. Its audio subsystem adopts a
hardware design similar to that of the Yoga Pro 7 15ASH11.
It shares PCI SSID 17aa:38f9 with Thinkbook 16P Gen5.
Therefore, use HDA_CODEC_QUIRK to apply ALC287_FIXUP_LENOVO_YOGA_PRO7
for identification.
After added the HDA_CODEC_QUIRK quirk special for Lenovo Legion 7
15ASH11, the mic mute LED works well.
Signed-off-by: Jackie Dong <xy-jackie@139.com>
Link: https://patch.msgid.link/20260727080048.13254-1-xy-jackie@139.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
MIN_PERF and MAX_PERF are optional CPPC controls. DESIRED_PERF is also
optional with CPPC2 when autonomous selection is supported.
The cppc-cpufreq target callbacks populate both limits for every request
without checking whether the controls are implemented. cppc_set_perf()
consequently passes NULL register descriptors to cpc_write(). The writes
fail width validation and their return values are ignored, so the failed
access paths are repeated on every target request. An autonomous-only
platform can take the same path for DESIRED_PERF.
Check that each performance control is supported before calling
cpc_write().
Fixes: ea3db45ae4 ("cpufreq: cppc: Update MIN_PERF/MAX_PERF in target callbacks")
Reviewed-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Reviewed-by: Lifeng Zheng <zhenglifeng1@huawei.com>
Link: https://patch.msgid.link/20260724104042.1481804-1-christian.loehle@arm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
pch_irq_type() is registered as the irq_chip .irq_set_type callback and
takes chip->spinlock with spin_lock_irqsave(). This callback is reached
from __setup_irq() -> __irq_set_trigger() -> chip->irq_set_type() while
the caller holds desc->lock, a raw_spinlock_t, with hardirqs disabled.
That context is not sleepable, but on PREEMPT_RT a regular spinlock_t is
an rtmutex-backed sleeping lock, so acquiring it there is invalid.
This was confirmed on a PREEMPT_RT kernel with lockdep
(PROVE_RAW_LOCK_NESTING and DEBUG_ATOMIC_SLEEP). A grounded PoC mirrored
pch_irq_type()'s locking and drove it through the real genirq carrier
irq_set_irq_type() -> __irq_set_trigger() -> chip->irq_set_type(), i.e.
the same __irq_set_trigger() edge that __setup_irq() takes for a
requested IRQ. With the original spin_lock_irqsave() edge lockdep
reported an invalid wait context, immediately followed by:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 95, name: insmod
hardirqs last disabled at (3784): _raw_spin_lock_irqsave+0x4f/0x60
rt_spin_lock+0x3a/0x1c0
repro_irq_set_type+0x64/0xa0 [pch_repro]
__irq_set_trigger+0x69/0x140
irq_set_irq_type+0x78/0xd0
Switching the mirrored lock to raw_spinlock_t made both splats go away.
Convert the register lock to raw_spinlock_t. The same lock also
serializes the GPIO direction/value callbacks and the suspend/resume
register save/restore, but all of those critical sections only perform
MMIO register accesses (ioread32()/iowrite32()) and
irq_set_handler_locked(); none of them contain sleepable operations.
Keeping this register lock non-sleeping is therefore appropriate for the
irqchip callbacks and does not change the GPIO-side locking contract.
This is the same class of issue and fix as recently addressed for other
GPIO controllers, e.g. commit 286533cb14 ("gpio: sch: use raw_spinlock_t
in the irq startup path") and commit 90f0109019 ("gpio: eic-sprd: use
raw_spinlock_t in the irq startup path").
Fixes: 38eb18a6f9 ("gpio-pch: Support interrupt function")
Cc: stable@vger.kernel.org
Signed-off-by: Junjie Cao <junjie.cao@intel.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260723014129.1129730-1-junjie.cao@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
FOLL_LONGTERM pinning fails for some memory types, such as file-backed
guest memory. As a result, kvm_s390_adapter_map() returns -EINVAL and
irqfd adapter registration fails even though interrupt delivery could
still work via the existing non-atomic path.
When FOLL_LONGTERM pinning fails, verify that the page is accessible
using a short-term pin instead. If the short-term pin succeeds, unpin
the page and add a map entry with pinned=false to preserve MAP/UNMAP
symmetry. The non-atomic irqfd path already performs short-term pinning
for interrupt delivery, so this restores the previous behavior for
memory that cannot be pinned long-term.
get_map_info() is updated to return NULL for unpinned entries so that
the atomic irqfd fast path falls back to the non-atomic path.
kvm_s390_adapter_unmap() and kvm_s390_unmap_all_adapters() skip dirty
marking and unpin for unpinned entries.
Update Documentation/virt/kvm/devices/s390_flic.rst to reflect the
new MAP/UNMAP behavior.
Fixes: c9a5688380 ("KVM: s390: Add map/unmap ioctl and clean mappings post-guest")
Signed-off-by: Jaehoon Kim <jhkim@linux.ibm.com>
Reviewed-by: Douglas Freimuth <freimuth@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
fs/erofs/decompressor_lzma.c sizes the module-global MicroLZMA stream
pool from num_possible_cpus() when the lzma_streams module parameter is
unset, then z_erofs_load_lzma_config() preallocates one image-supplied
dictionary per stream, accepting dictionaries up to 8 MiB. On high-CPU
systems, a small EROFS image can pin hundreds of MiB of vmalloc-backed
decoder state until the erofs module is unloaded.
Impact: An EROFS image mounted by the system can pin up to 8 MiB of
vmalloc memory per LZMA stream, either as intended or unexpectedly.
Bound the default stream count by a new
CONFIG_EROFS_FS_ZIP_LZMA_DEFAULT_MAX_STREAMS option, default 16, so the
worst-case default preallocation is 128 MiB if the number of CPUs is no
less than 16 while preserving the existing per-image dictionary limit.
An explicit lzma_streams module parameter is still honoured as-is, so
administrators who deliberately size the pool are not affected.
Fixes: 622ceaddb7 ("erofs: lzma compression support")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Previously, backing files for page cache sharing were set up with
f_path left as NULL (only f_inode was valid). It worked, but a recent
mincore fix relies on f_path.mnt and crashes (found by "erofs/028" on
7.2-rc4):
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP PTI
CPU: 3 UID: 0 PID: 675528 Comm: fincore Not tainted 7.2.0-rc4-00002-g[]-dirty #1 PREEMPT(lazy)
Hardware name: Red Hat KVM, BIOS 1.16.0-4.al8 04/01/2014
RIP: 0010:__do_sys_mincore+0xc0/0x2c0
...
Specify valid paths using valid disconnected dentries together with
erofs_ishare_mnt instead of leaving f_path empty, so they are more
like real backing files in a pseudo filesystem and standard
backing_file_open() can be used directly.
Fixes: e187bc02f8 ("mm: do file ownership checks with the proper mount idmap")
Acked-by: Hongbo Li <hongbohbli@tencent.com>
Signed-off-by: Gao Xiang <xiang@kernel.org>
The cifs.idmap key type stores its payload length in key->datalen, which
is limited to U16_MAX. Accepting a larger key payload truncates the
recorded length and can make later users interpret the payload using
inconsistent bounds.
Reject oversized preparsed payloads before allocating or copying them.
This keeps key->datalen consistent with the stored data for both inline
and separately allocated idmap payloads.
Signed-off-by: Li Qiang <liqiang01@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
Both branches of the check return the same value, so the check has
no effect. Remove it and return the value directly.
This is the result of running the Coccinelle script from
scripts/coccinelle/misc/cond_return_no_effect.cocci.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CIFSSMBRead(), CIFSSMBWrite() and CIFSSMBWrite2() allocate a request
buffer before checking whether tcon->ses->server is NULL. If that
defensive check ever fails, the helper returns -ECONNABORTED without
releasing the request buffer.
Fix these leaks by releasing the allocated request buffer before
returning from these error paths. Use cifs_small_buf_release() for the
buffers allocated by small_smb_init() and cifs_buf_release() for the
buffer allocated by smb_init().
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1.1.
An x86_64 allyesconfig build showed no new warnings.
Runtime validation used a temporary fault-injection hook to force
tcon->ses->server to NULL after request-buffer initialization. On the
unfixed kernel, the harness observed two leaked small request buffers and
one leaked large request buffer, with directed kmemleak dumps confirming
the CIFS buffer allocation stacks. After the fix, no CIFS request-buffer
deltas remained.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently, cifs_get_swn_reg() allocates new registry entries using
GFP_ATOMIC. Since we lock a mutex here, this is clearly not an atomic
context. Use GFP_KERNEL instead.
Also, fix a minor grammatical error in the comment above the function.
Signed-off-by: Fredric Cover <fredric.cover.lkernel@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Commit fbefe22811 ("scsi: libsas: Don't always drain event workqueue
for HA resume") introduced sas_resume_ha_no_sync() to avoid a deadlock:
the PHYE_RESUME_TIMEOUT handler, running on the HA event workqueue,
calls sas_deform_port() -> sas_destruct_devices(), which removes SCSI
devices and waits for the host to become runtime-active. But the host
cannot resume until sas_resume_ha() -> sas_drain_work() returns, and the
drain is blocked on that very handler.
However skipping the drain reintroduces a race: hisi_sas returns from
resume before all PHY UP work and libsas discovery work finish. The
controller may then autosuspend while disks are still waking up. The
disks issue IO to a suspended controller, the IO fails, and the disks
get disabled.
Fix the deadlock at its source by moving the PHYE_RESUME_TIMEOUT
notification to after sas_drain_work(). By then the host resume is about
to complete, so device removal through device_link no longer blocks on
the resume and the cycle is broken.
With the deadlock gone, restore sas_resume_ha() (the draining variant)
in hisi_sas and remove sas_resume_ha_no_sync().
The reorder is safe for the other libsas consumers (isci, pm8001,
aic94xx, mvsas). During suspend, sas_suspend_devices() calls
sas_notify_lldd_dev_gone() for each device, which sets dev->lldd_dev to
NULL. When scsi_unblock_requests re-enables I/O in resume, any I/O to a
timed-out phy's disk is immediately rejected by the LLDD before reaching
hardware: isci returns SAS_DEVICE_UNKNOWN (mapped to DID_BAD_TARGET),
and pm8001 returns SAS_PHY_DOWN (mapped to DID_NO_CONNECT). Both
complete directly via scsi_done() without entering SCSI EH. This is
identical in both the old and new ordering since lldd_dev_gone runs
during suspend, before resume. The reorder only affects when the
PHYE_RESUME_TIMEOUT handler runs (synchronized by sas_drain_work()
vs. asynchronous after resume returns), not whether I/O can reach the
device. aic94xx and mvsas do not register any PM ops and never reach
this code path.
Fixes: fbefe22811 ("scsi: libsas: Don't always drain event workqueue for HA resume")
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20260716081145.3950172-1-yangxingui@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
iscsi_tcp_hdr_dissect() receives the data segment of several PDU types
into the fixed-size conn->data buffer, which is allocated for
ISCSI_DEF_MAX_RECV_SEG_LEN (8192) bytes. For the LOGIN_RSP, TEXT_RSP,
REJECT and ASYNC_EVENT opcodes the dissect path already rejects a PDU
whose DataSegmentLength exceeds that buffer.
The SCSI Command Response (ISCSI_OP_SCSI_CMD_RSP) path also copies its
data segment (sense/response data) into conn->data via
iscsi_tcp_data_recv_prep(), but it does so without the same check. The
only upstream bound on in.datalen is conn->max_recv_dlength, the
initiator's advertised MaxRecvDataSegmentLength, which is commonly
negotiated well above 8192 (open-iscsi defaults to 262144). A target
that returns a SCSI Response with a DataSegmentLength between 8193 and
max_recv_dlength therefore overflows the 8192-byte conn->data buffer.
Once the same bound applies, ISCSI_OP_SCSI_CMD_RSP is handled exactly
like those responses: bound the data segment, receive it into conn->data
when present, and otherwise complete the PDU with no data. Fold the
opcode into that case group rather than duplicating the check.
Fixes: a081c13e39 ("[SCSI] iscsi_tcp: split module into lib and lld")
Suggested-by: Chris Leech <cleech@redhat.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Acked-by: Chris Leech <cleech@redhat.com>
Link: https://patch.msgid.link/20260716065848.1653431-1-sammiee5311@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
iscsi_scsi_cmd_rsp() copies the sense data of a SCSI Response from the
target-supplied data segment. The segment carries a 2-byte sense length
followed by the sense bytes, so it must hold 2 + senselen bytes, but the
bounds check only requires datalen >= senselen:
senselen = get_unaligned_be16(data);
if (datalen < senselen)
goto invalid_datalen;
memcpy(sc->sense_buffer, data + 2,
min_t(uint16_t, senselen, SCSI_SENSE_BUFFERSIZE));
A target that returns a SCSI Response whose datalen equals senselen
(with senselen <= SCSI_SENSE_BUFFERSIZE) makes the memcpy() from data +
2 read up to two bytes past the received data. Those bytes are stale
conn->data contents and end up in the command's sense buffer, which is
returned to userspace.
Account for the 2-byte sense length prefix in the check.
Fixes: 7996a778ff ("[SCSI] iscsi: add libiscsi")
Suggested-by: Sashiko AI <sashiko-bot@kernel.org>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: HyeongJun An <sammiee5311@gmail.com>
Acked-by: Chris Leech <cleech@redhat.com>
Link: https://patch.msgid.link/20260714104934.1404423-1-sammiee5311@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
iopf_group_alloc() links each last-page IOPF group into the generic IOPF
pending list before invoking the domain fault handler.
iommufd_fault_iopf_handler() also queued an accepted group in the
IOMMUFD deliver list without removing it from the generic pending list.
When detach or HWPT replacement drops the device's IOPF reference count
to zero, an IOMMU driver may call iopf_queue_remove_device(). That
function responds to and frees groups through the generic pending list
without removing the same groups from IOMMUFD's deliver list or response
xarray. A later read, response, or cleanup can then access the freed
group and cause a UAF.
Fix this by dequeuing an accepted group from the generic pending list
before IOMMUFD queues it for userspace response.
Make iopf_group_response() send a response regardless of pending-list
membership, so the dequeued group can still be completed by IOMMUFD.
Link: https://patch.msgid.link/r/3CFD314D0FE4D7EC+20260720085017.3998878-2-peiyang_he@smail.nju.edu.cn
Closes: https://lore.kernel.org/all/B4F28798E2E784CA+d29f723c-b2b5-4b67-8d1c-4f7b9b0b27cb@smail.nju.edu.cn/
Fixes: 34765cbc67 ("iommufd: Associate fault object with iommufd_hw_pgtable")
Cc: stable@vger.kernel.org
Tested-by: Peiyang He <peiyang_he@smail.nju.edu.cn>
Assisted-by: Codex:gpt-5.6-sol
Signed-off-by: Peiyang He <peiyang_he@smail.nju.edu.cn>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
snd_timer_close_locked() marks an instance with SNDRV_TIMER_IFLG_DEAD
and returns early when the flag is already set, but the flag is never
cleared again. A completed close ends in remove_slave_links(), which
leaves timeri->timer NULL, so a second close is already harmless through
the timer == NULL path; the early return can only be reached by an
instance that was opened again in between. For such an instance the
close unlinks nothing, so snd_timer_instance_free() frees an object that
is still on timer->open_list_head, still on snd_timer_master_list if it
was opened with a slave key, still owns any adopted slaves, and still
holds its timer and module references.
snd_seq_timer_open() reopens an instance exactly like that: it retries
its fallback open on the same object after a failure that has already
run snd_timer_close_locked() internally. An unprivileged user with
access to /dev/snd/timer and /dev/snd/seq can force that failure, since
snd_timer_check_master() returns -EBUSY when a pending slave matches the
new master's (slave_class, slave_id) key and the target timer has
reached max_instances, and SNDRV_TIMER_IOCTL_SELECT with dev_class =
SNDRV_TIMER_CLASS_SLAVE keeps the caller-supplied dev_sclass, so a
sequencer queue's key can be forged. The freed instance is afterwards
dereferenced by any further snd_timer_open() on that timer, by
snd_timer_check_slave(), and by /proc/asound/timers, which faults on the
stale ti->owner pointer.
The flag only has to be visible while the close is in progress, which is
all its other users need. Clear it in remove_slave_links(), under the
same timer->lock that sets it, once the instance is off every list.
Fixes: da3039e91d ("ALSA: timer: Forcibly close timer instances at closing")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-5
Signed-off-by: Norbert Szetei <norbert@doyensec.com>
Link: https://patch.msgid.link/CA41AA48-75BF-45E9-A36D-3A5D2F124F60@doyensec.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Infinix INBOOK X3 Slim (ALC269VB, subsystem 0x2782:0250) has its
internal speakers wired to pin 0x1b, but the BIOS pin configuration
table declares 0x1b as "no physical connection" (0x411111f0). It instead
declares pin 0x14 as the internal speaker, although nothing is connected
to 0x14.
As a result the internal speakers are silent under Linux while the
headphone jack works correctly. The codec output path to 0x14 is fully
open (DAC assigned and streaming, mixer and pin unmuted, EAPD asserted),
so the failure is silent with no error reported. The speakers work under
Windows, where the vendor driver supplies its own pin table.
Add a fixup that disables the unconnected pin 0x14 and declares pin
0x1b as the internal speaker.
Reusing the existing ALC269VC_FIXUP_INFINIX_Y4_MAX was tried first, since
it also remaps 0x1b to an internal speaker. It is not sufficient here: it
leaves 0x14 declared, so autoconfig finds two line_outs
line_outs=2 (0x14/0x1b/0x0/0x0/0x0) type:speaker
and binds the primary "Speaker" control to the unconnected pin 0x14 while
demoting the working speaker at 0x1b to "Bass Speaker". Audio is audible
that way, but the volume and mute controls a desktop actually uses end up
attached to a pin that is not wired to anything. Disabling 0x14 is what
produces a single correct Speaker output.
Verified on the affected machine: with the corrected pin
configuration the driver's autoconfig reports
line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:speaker
both channels play, headphone auto-mute switches correctly in both
directions, and audio survives codec runtime suspend (D3) and resume.
Signed-off-by: Gunal Seenivasagan <gunal2002@gmail.com>
Link: https://patch.msgid.link/20260726085715.229802-1-gunal2002@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_usbmidi_akai_output() computes its fill-loop bound
buf_end = ep->max_transfer - MAX_AKAI_SYSEX_LEN - 1;
as a signed int, so a small device-advertised bulk-OUT max_transfer
makes buf_end negative. The loop guard then compares the u32
urb->transfer_buffer_length against that negative int: the usual
arithmetic conversion turns buf_end into a large unsigned value, so the
guard stays true and each iteration keeps appending SysEx framing and
payload bytes past the end of the URB transfer buffer, which is only
max_transfer bytes long.
A USB device that advertises a tiny bulk-OUT endpoint can therefore
trigger an attacker-length- and content-controlled heap out-of-bounds
write when a process writes to the created /dev/snd/midiC*D* node.
Return early when there is no room for even one SysEx, so the loop is
never entered with a bound that would wrap. The loop is the last
statement of the function, so bailing out is equivalent to it not
running.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: 4434ade8c9 ("ALSA: usb-audio: add support for Akai MPD16")
Suggested-by: Takashi Iwai <tiwai@suse.de>
Reported-by: Federico Kirschbaum <federico.kirschbaum@xbow.com>
Reported-by: Baul Lee <baul.lee@xbow.com>
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Link: https://patch.msgid.link/20260726074500.50145-1-baul.lee@xbow.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_rme_digiface_read_status() reads a four-word status block from the
device into an uninitialised on-stack __le32 buf[4] and, whenever the
vendor control-IN transfer does not return a negative error, copies all
four words into the caller's status[].
snd_usb_ctl_msg() copies the full requested size back into the caller's
buffer regardless of how many bytes the data stage actually delivered:
buf = kmemdup(data, size, GFP_KERNEL);
err = usb_control_msg(dev, pipe, request, requesttype,
value, index, buf, size, timeout);
memcpy(data, buf, size);
usb_control_msg() returns the transferred length on a short control-IN,
which is a non-negative value, and writes only that many bytes. The
remainder of the copy back is the kmemdup()ed image of the caller's
buffer, so a device answering with a short data stage leaves the
trailing words of buf[] holding leftover kernel stack. The only guard
in the caller is err < 0, so those words are stored into status[].
They then reach user space: snd_rme_digiface_get_status_val() selects a
16-bit halfword of status[] per the control's reg/mask, and the eight
Digiface status controls together expose the whole 16-byte frame to an
unprivileged reader of /dev/snd/controlC*.
Zero-initialise the buffer so a short read yields zeros instead of stack
residue. This mirrors snd_rme_get_status1(), which already clears its
output word before the same kind of vendor read.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: 611a96f6ac ("ALSA: usb-audio: Add mixer quirk for RME Digiface USB")
Reported-by: Federico Kirschbaum <federico.kirschbaum@xbow.com>
Reported-by: Baul Lee <baul.lee@xbow.com>
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Link: https://patch.msgid.link/20260726065020.46070-1-baul.lee@xbow.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_ump_attach_legacy_rawmidi() allocates the legacy conversion array
ump->out_cvts and, on the snd_rawmidi_new() error path, frees it with
kfree() but leaves ump->out_cvts pointing at the freed memory. When the
endpoint is later torn down, snd_ump_endpoint_free() frees ump->out_cvts
a second time, resulting in a double free.
The host snd-usb-audio driver attaches the legacy rawmidi for any USB
MIDI 2.0 (UMP) device, so a device that makes snd_rawmidi_new() fail
reaches this path on enumeration.
Clear ump->out_cvts after freeing it on the error path so it is not
freed again during teardown.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: 33cd763078 ("ALSA: ump: Export MIDI1 / UMP conversion helpers")
Reported-by: Federico Kirschbaum <federico.kirschbaum@xbow.com>
Reported-by: Baul Lee <baul.lee@xbow.com>
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Link: https://patch.msgid.link/20260726051633.41206-1-baul.lee@xbow.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
create_midi2_ump() registers a card-owned snd_ump_endpoint and stores a
back-pointer to its per-interface snd_usb_midi2_ump object in
ump->private_data, but it never installs an ump->private_free hook and
never clears that pointer.
If a later step of snd_usb_midi_v2_create() fails, its error path calls
free_all_midi2_umps(), which kfree()s the snd_usb_midi2_ump object while
the already-registered endpoint keeps pointing at it. The created
/dev/snd/umpC*D* node stays exposed, so the first operation of any UMP
open, ump_to_endpoint(), dereferences the dangling ump->private_data and
reads rmidi->eps[dir] out of freed memory.
A malicious USB MIDI 2.0 device that makes creation fail after the
endpoint is registered can thus trigger a slab use-after-free read on a
subsequent open of the UMP node.
Clear the endpoint's back-pointer before freeing the object, and let
ump_to_endpoint() tolerate a NULL private_data so the open/close/trigger
callbacks fail cleanly (their callers already handle a NULL endpoint)
instead of dereferencing a stale pointer.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: ff49d1df79 ("ALSA: usb-audio: USB MIDI 2.0 UMP support")
Reported-by: Federico Kirschbaum <federico.kirschbaum@xbow.com>
Reported-by: Baul Lee <baul.lee@xbow.com>
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Link: https://patch.msgid.link/20260726051337.41124-1-baul.lee@xbow.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Acer Nitro 5 AN515-46 (SSID 1025:159e, Realtek ALC287) has a combo
headset jack whose microphone does not work out of the box: the BIOS
leaves pin 0x19 unconfigured, so no headset mic is created.
Apply ALC2XX_FIXUP_HEADSET_MIC, the same fixup already used by the
sibling models AN515-57 (1025:1539) and AN517-55 (1025:1597), which
makes the headset microphone work correctly.
Tested on an Acer Nitro 5 AN515-46 by overriding the model via a patch
firmware with model=alc2xx-fixup-headset-mic.
Signed-off-by: Marcos Paulo Medeiros <maarcospm1996@gmail.com>
Link: https://patch.msgid.link/20260725214131.25872-1-maarcospm1996@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Setting up the interface when suspended/resuming fails on this card.
Adding a reset and delay quirk will eliminate this problem.
Note: This device's VID conflicts with Apple's (0x05ac).
usb 1-1: New USB device found, idVendor=05ac, idProduct=110b
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Q2A
usb 1-1: Manufacturer: JKY Technology
usb 1-1: SerialNumber: 330270D2251225
Suggested-by: Rong Zhang <i@rong.moe>
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Reviewed-by: Rong Zhang <i@rong.moe>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/TYUPR06MB6217566CFD33F57D3AE46816D2CF2@TYUPR06MB6217.apcprd06.prod.outlook.com
The lx6464es driver advertises both 16-bit and packed 24-bit PCM formats,
but lx_trigger_start() and lx_interrupt_request_new_buffer() calculate the
DMA period size as runtime->period_size * runtime->channels * 3. That is
only correct for the packed 24-bit formats.
For 16-bit streams the driver submits buffers that are 50% larger than the
actual ALSA period and advances the DMA address by the same wrong amount.
For example, with 2 channels, 256 frames and 4 periods, the third buffer
already extends beyond the ALSA buffer and the fourth buffer starts outside
it.
Use snd_pcm_lib_period_bytes() so the byte count matches the runtime
format, channel count and period size.
Fixes: 02bec49045 ("ALSA: lx6464es - driver for the digigram lx6464es interface")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Link: https://patch.msgid.link/8BB12E8D92A7CDBA+20260723085710.2567463-1-raoxu@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
drivers/pinctrl/pinctrl-bm1880.c initialises its pinconf_ops with
.is_generic = true, but that field is only present when
CONFIG_GENERIC_PINCONF is enabled (guarded by #ifdef in pinconf.h).
The Kconfig entry for PINCTRL_BM1880 never selects GENERIC_PINCONF,
so any config that enables CONFIG_PINCTRL_BM1880=y without
CONFIG_GENERIC_PINCONF=y fails to compile:
drivers/pinctrl/pinctrl-bm1880.c:1288:10: error: 'const struct pinconf_ops' has no member named 'is_generic'
Found by randconfig testing on arm64; tinyconfig reproducer below.
Add the missing select to fix the build.
Fixes: 49bd61ebce ("pinctrl: Add pinconf support for BM1880 SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Boortz <bennib@mailbox.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
commit 6bc3462a0f ("pinctrl: amd: Mask wake bits on probe again")
introduced a regression where Wake-on-LAN no longer works after suspend
or shutdown on some AMD platforms.
Firmware-programmed S4 wake bits for devices like PCIe NICs using PCI
PME are cleared at probe, but nothing restores them. Unlike S0i3/S3 wake
sources that use enable_irq_wake() -> amd_gpio_irq_set_wake(), PCIe PME
does not use GPIO IRQ infrastructure and relies on firmware configuration.
The original intent of commit 6bc3462a0f ("pinctrl: amd: Mask wake
bits on probe again") was to clear spurious wake bits left by firmware
to prevent unwanted wakeups. However, S4 wake bits are used for
hardware-level wake sources like WoL that bypass the kernel's IRQ wake
API.
Fix by preserving S4 wake bits at probe and only clearing S0i3/S3 bits:
- Firmware-configured S4 wake sources (WoL) continue working
- Kernel maintains control of S3/S0i3 wake policy via set_wake()
- S3-only wake sources work correctly per commit f31f33dbb3 ("pinctrl:
amd: Take suspend type into consideration which pins are non-wake")
The trade-off is that firmware-programmed spurious S4 wake bits remain
set, but this is less problematic than breaking WoL.
Fixes: 6bc3462a0f ("pinctrl: amd: Mask wake bits on probe again")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The driver calls ocelot_regmap_from_resource() via <linux/mfd/ocelot.h>,
which internally uses devm_regmap_init_mmio() and requires REGMAP_MMIO.
The Kconfig entry does not select REGMAP_MMIO, causing a build failure
when no other driver in the config happens to pull in REGMAP_MMIO:
include/linux/mfd/ocelot.h:34:24: error: implicit declaration of function 'devm_regmap_init_mmio'
Found by randconfig testing on arm64; tinyconfig reproducer below.
Fixes: 2afbbab45c ("pinctrl: microchip-sgpio: update to support regmap")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Boortz <bennib@mailbox.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
dt_remember_or_free_map() duplicates dev_name for each map entry. If
kstrdup_const() fails, dt_free_map() frees dev_name in all num_maps
entries, including entries that have not been initialized.
Some pinctrl drivers, including pinctrl-imx, allocate the map with
kmalloc() and leave dev_name for the core to initialize. The untouched
entries therefore contain uninitialized data which is passed to
kfree_const().
Reproduced on qemu's mcimx6ul-evk (pinctrl-imx) with failslab injection
while binding the pinctrl-consuming device, under KASAN:
BUG: KASAN: double-free in dt_free_map+0x34/0xa4
Free of addr c425a900 by task init/1
kfree from dt_free_map+0x34/0xa4
dt_free_map from dt_remember_or_free_map+0x184/0x198
dt_remember_or_free_map from pinctrl_dt_to_map+0x33c/0x4c8
pinctrl_dt_to_map from create_pinctrl+0x9c/0x5c0
Initialize all dev_name fields to NULL before duplicating the device
name, making the full-map cleanup safe after a partial failure.
Fixes: be4c60b563 ("pinctrl: devicetree: Avoid taking direct reference to device name string")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-fable-5
Signed-off-by: Karl Mehltretter <kmehltretter@gmail.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
A userspace-driven ALSA timer (SND_UTIMER) lets an unprivileged user set
the backing snd_timer's hardware resolution to an arbitrary 64-bit value
via SNDRV_TIMER_IOCTL_CREATE. snd_utimer_create() only rejects zero.
When such a timer is bound to a sequencer queue, initialize_timer()
computes the tick period as
tmr->ticks = 1000000000 / (r * freq);
where r is that user-controlled resolution and freq is the sequencer
update rate in Hz, clamped to MIN_FREQUENCY..MAX_FREQUENCY (10..6250).
A resolution of 2^63 makes the 64-bit product r * freq wrap to zero for
any even freq, including DEFAULT_FREQUENCY (1000), so the division faults
with a divide-by-zero.
The division runs under tmr->lock with interrupts disabled, so the oops
leaves the spinlock held and hangs the CPU. It is reachable by an
unprivileged user with access to /dev/snd/timer and /dev/snd/seq.
Oops: divide error: 0000 [#1] SMP KASAN PTI
CPU: 7 UID: 1000 PID: 456 Comm: alsa_seq_utimer Not tainted 7.2.0-rc4+
RIP: 0010:initialize_timer.constprop.0+0x20a/0x2d0
snd_seq_timer_start+0x15e/0x2b0
snd_seq_control_queue+0x56f/0xba0
snd_seq_write+0x3e0/0x730
Reject an overflowing product with check_mul_overflow() and fall back to
a single tick, which also avoids feeding a wrapped-but-nonzero divisor
(e.g. 2^63 * 1000 mod 2^64 == 0, or other resolutions wrapping to a small
value) into the period computation.
Fixes: 37745918e0 ("ALSA: timer: Introduce virtual userspace-driven timers")
Cc: <stable@vger.kernel.org>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Norbert Szetei <norbert@doyensec.com>
Link: https://patch.msgid.link/DF8A3844-AD5E-4B8A-9CFC-BD83C212BA38@doyensec.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following batch contains Netfilter/IPVS fixes for net. This batch
includes a mix of IPVS follow ups related to Sashiko reports, as well as
crash fixes for connection tracking expectation, helpers, ipset and
nf_tables mostly for old bugs. This also includes a fix for the
flowtable tunnel selftest.
1) Use s32 instead of s16 to calculate the remaining payload containing
SIP messages, otherwise underflow is possible allowing out-of-bound
memory access beyond the skb->data area. From Xiang Mei.
2) Fix the counter check in the flowtable selftest for tunnels, from
Lorenzo Bianconi.
3) Add and use nf_ct_expect_related_pair() to add the RTP and RTCP
expectations under the expectation lock, this is required by the SIP
and H.323 NAT helpers. This fixes a possible reinsertion of an
expectation with the DEAD flag set on while looping to find
consecutive ports.
4) Fix ipset UaF during table resize by blocking comment updates on
kernel-side adds. From David Lee.
5) Do not propagate the IP_VS_CONN_F_ONE_PACKET flag when using IPVS
state synchronization, otherwise reaching stale freed from
ip_vs_conn struct is possible, Zhiling Zou.
6) Adjust the hn1 hash node when the forwarding method changes between
MASQ and non-MASQ for an already hashed connection. This can leave
stale hash nodes pointing to a freed struct ip_vs_conn and trigger
UaF while reading /proc/net/ip_vs_conn. From Julian Anastasov.
7) nft_object rhltable needs to be per table, just like chain rhltable,
otherwise UaF from object lookup path while netns is being released.
There is also the nlevent path that can reach stale objects. Placing
this rhltable under the table hierarchy fixes this issue.
8) Reject invalid combined usage of hashlimit tables with and without
XT_HASHLIMIT_RATE_MATCH flag mode, otherwise access to uninitialized
.burst field of dsthash_ent is possible.
9) Fix checksum validations in IPVS performed from LOCAL_IN,
from Julian Anastasov.
10) Fix incorrect packet offset to layer 4 protocol in IPVS, uncovered
by Sashiko, from Julian Anastasov.
11) Skip the mangling of ICMP replies for non-first fragments, also
reported by Sashiko. Also from Julian.
12) Clear ip_vs_conn flags under the spinlock to fix a possible data
race. From Julian Anastasov.
13) Fix incorrect calculation of the payload bitmask in the nf_tables
hardware offload support, leading to UBSAN splat. From Xiang Mei.
* tag 'nf-26-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_payload: fix mask build for partial field offload
ipvs: clear the nfct flag under lock
ipvs: do not mangle ICMP replies for non-first fragments
ipvs: fix places with wrong packet offsets
ipvs: fix the checksum validations
netfilter: xt_hashlimit: validate hashtable supports XT_HASHLIMIT_RATE_MATCH
netfilter: nf_tables: make nft_object rhltable per table
ipvs: adjust double hashing when fwd method changes
ipvs: do not propagate one-packet flag to synced conns
netfilter: ipset: do not update comments from kernel-side hash adds
netfilter: nf_conntrack_expect: add and use nf_ct_expect_related_pair()
selftests: netfilter: nft_flowtable.sh: fix offload counter verification for tunnel tests
netfilter: nf_conntrack_sip: widen NAT rewrite delta to s32 in sip_help_tcp()
====================
Link: https://patch.msgid.link/20260723163910.274695-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A frag_list skb can reach veth with data_len set but nr_frags zero.
veth_convert_skb_to_xdp_buff() only converts skbs that are shared,
locked, have frags[], or do not have enough headroom. It later uses
skb_is_nonlinear() to decide whether to set XDP_FLAGS_HAS_FRAGS and
xdp_frags_size.
That exposes frag_list data to XDP as if it were stored in frags[], but
frags[] is empty. AF_XDP copy mode can then trust the bogus XDP fragment
metadata, walk an empty fragment entry, and crash in memcpy() from
__xsk_rcv().
Route non-linear skbs through skb_pp_cow_data() before exposing them to
XDP, and only advertise XDP frags when the resulting skb has frags[].
skb_copy_bits() already handles frag_list input, and skb_pp_cow_data()
builds frags[] output with skb_add_rx_frag(), which is the
representation XDP multi-buffer expects.
Fixes: 718a18a0c8 ("veth: Rework veth_xdp_rcv_skb in order to accept non-linear skb")
Cc: stable@vger.kernel.org
Signed-off-by: Matt Fleming <mfleming@cloudflare.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@toke.dk>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260722191925.2192070-1-matt@readmodwrite.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pktgen_change_name() replaces pkt_dev->entry while holding t->if_lock.
pktgen_remove_device() removes the same entry before
_rem_dev_from_if_list() takes that lock.
This allows the following interleaving:
CPU 0 (NETDEV_CHANGENAME) CPU 1 (kpktgend)
if_lock(t)
proc_remove(pkt_dev->entry)
proc_remove(pkt_dev->entry)
pkt_dev->entry = proc_create_data(...)
if_unlock(t)
The kthread can pass the stale proc_dir_entry to proc_remove() after the
rename path has freed it. A reproducer with a widened race window reports:
BUG: KASAN: slab-use-after-free in proc_remove+0x78/0x80
Read of size 8 at addr ffff8881478fea70 by task kpktgend_0/67
Call Trace:
proc_remove+0x78/0x80
pktgen_remove_device.isra.0+0x11c/0x4c0
pktgen_thread_worker+0x1214/0x6bc0
kthread+0x2c6/0x3b0
Allocated by task 95:
__proc_create+0x204/0x790
proc_create_data+0x72/0xe0
pktgen_thread_write+0xd61/0x1510
Freed by task 28:
kmem_cache_free+0xcb/0x3d0
proc_free_inode+0x5b/0x80
rcu_core+0x50a/0x1850
The buggy address belongs to the object at ffff8881478fea00
which belongs to the cache proc_dir_entry of size 192
Move proc_remove() into the if_lock-protected list removal helper. Keep it
before list_del_rcu() to preserve the ordering required by add_device().
The rename path must then finish replacing the entry before removal, or
it observes that the device is no longer on the list.
Fixes: 39df232f1a ("[PKTGEN]: fix device name handling")
Cc: stable@vger.kernel.org
Signed-off-by: Chengfeng Ye <nicoyip.dev@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260719145740.2888967-1-nicoyip.dev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When cake_configure_rates() is called from the dequeue path with
rate_adjust=true, it only needs to update the rate parameters. The
loop that clears the unused tins is both unnecessary and harmful in
this path:
- cake_clear_tin() overwrites q->cur_tin and q->cur_flow, which are
actively used by cake_dequeue(), corrupting the dequeue state.
- iterating over the unused tins and their internal queues to purge
packets adds needless overhead to the hot path.
Skip the entire loop when rate_adjust is set, as neither
cake_clear_tin() nor the mtu_time update are needed when only the
rate changes.
The clearing loop runs on every rate adjustment from the dequeue path,
clearing (max_tins - cur_tins) tins each time, so the cost grows the
fewer tins the configured mode actually uses. Testing cake_mq over veth
(8 rx/tx queues, 2 Gbit limit) with flent's [1] rrul and tcp_nup tests and
32 TCP upstreams shows a large drop in loaded latency and a throughput
gain, restoring behaviour to pre-15c2715a5264 levels:
+------------+------+------+-------+-------+---------+
| kernel | mode | test | base | load | tput |
| | | | (ms) | (ms) | (Mbit) |
+------------+------+------+-------+-------+---------+
| net-next | be | rrul | 0.810 | 11.78 | 1469.67 |
| net-next | be | nup | 0.637 | 85.71 | 1243.15 |
| net-next | ds3 | rrul | 0.397 | 15.28 | 1770.06 |
| net-next | ds3 | nup | 0.351 | 15.98 | 1799.39 |
+------------+------+------+-------+-------+---------+
| patched | be | rrul | 0.092 | 0.56 | 1873.40 |
| patched | be | nup | 0.109 | 1.82 | 1869.12 |
| patched | ds3 | rrul | 0.097 | 0.98 | 1866.10 |
| patched | ds3 | nup | 0.101 | 0.51 | 1861.79 |
+------------+------+------+-------+-------+---------+
The same trend holds on real hardware (IPQ8074A, 4 rx/tx queues,
OpenWrt): in besteffort mode the tcp_nup loaded latency drops from
~470 ms to ~4 ms.
[1] https://flent.org
Fixes: 15c2715a52 ("net/sched: sch_cake: fixup cake_mq rate adjustment for diffserv config")
Signed-off-by: Jonas Köppeler <j.koeppeler@tu-berlin.de>
Tested-by: Mike Pham <mikepham4321@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260720-sch_cake-skip-clearing-tins-v2-1-e6a8b0275c73@tu-berlin.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit c191b319f2 ("dpll: allow registering FW-identified pin with a
different DPLL") relaxed dpll_pin_register() to let fwnode-identified pins
register with DPLLs from a different driver. This allows, for example, the
ICE driver to register a zl3073x-created pin with its TXC DPLL using
ice_dpll_txclk_ops, which lack frequency_get and phase_adjust_get
callbacks.
After such cross-driver registration, the pin's dpll_refs xarray contains
refs from both drivers. dpll_cmd_pin_get_one() calls
dpll_xa_ref_dpll_first() which returns the ref with the lowest DPLL id.
When the foreign DPLL (e.g. ICE TXC) has a lower id than the owner DPLL
(e.g. zl3073x), the foreign ops are used for reporting. Since those ops
lack callbacks like frequency_get, pin-level attributes are silently
omitted from the netlink response.
For example, a zl3073x output pin that should report frequency and
phase-adjust shows neither:
Before:
# dpll pin show id 45
pin id 45:
module-name: zl3073x
clock-id: 3427468959636104019
board-label: 156M25_NAC0_CLKREF_SYNC
package-label: OUT3
type: synce-eth-port
capabilities: 0x0
phase-adjust-min: -2147483648
phase-adjust-max: 2147483647
phase-adjust-gran: 800
parent-device:
...
After:
# dpll pin show id 19
pin id 19:
module-name: zl3073x
clock-id: 15964355450360090479
board-label: 156M25_NAC0_CLKREF_SYNC
package-label: OUT3
type: synce-eth-port
frequency: 156250000 Hz
frequency-supported:
156250000 Hz
capabilities: 0x0
phase-adjust-min: -2147483648
phase-adjust-max: 2147483647
phase-adjust-gran: 800
phase-adjust: 0
parent-device:
...
Fix this by:
1. Adding dpll_pin_own_dpll_ref_first() helper that returns the first ref
whose DPLL matches the pin's (module, clock_id) tuple -- i.e. the DPLL
from the driver that created the pin and has the complete set of ops.
Return NULL if no owner ref is found.
2. Using dpll_pin_own_dpll_ref_first() in dpll_cmd_pin_get_one() with a
fallback to dpll_xa_ref_dpll_first() for pin-on-pin child pins whose
dpll_refs all point to a different driver's DPLLs.
3. Using dpll_pin_own_dpll_ref_first() in SET operations
(dpll_pin_freq_set, dpll_pin_esync_set, dpll_pin_ref_sync_state_set,
dpll_pin_phase_adj_set) returning -ENODEV if no owner ref exists.
Replacing the validation loops that rejected the entire operation when
any ref's ops lacked the required callback -- instead validate only the
owner refs so that foreign DPLLs with incomplete ops no longer block
SET operations.
4. Guarding all SET and rollback xa_for_each loops against NULL set
callbacks so that foreign refs without the operation are safely skipped
instead of causing a NULL pointer dereference.
Fixes: c191b319f2 ("dpll: allow registering FW-identified pin with a different DPLL")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260714125945.1823269-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update output Makefile in the corresponding tree only: for out-of-source
in-tree builds update $(objtree)/Makefile, for out-of-source out-of-tree
module builds update $(KBUILD_EXTMOD_OUTPUT)/Makefile instead.
In-source builds are not affected.
Since commit c9bb03ac2c ("kbuild: reduce output spam when building out
of tree"), building out-of-tree kernel modules out-of-source (make M=...
MO=...) causes a rewrite of $(objtree)/Makefile with KBUILD_EXTMOD and
KBUILD_EXTMOD_OUTPUT being set. That is problematic:
* $(objtree)/ must not be changed in any way when building out-of-tree
modules as it breaks other uses of $(objtree).
* Setting KBUILD_EXTMOD and KBUILD_EXTMOD_OUTPUT in $(objtree)/Makefile
kills the tree for incremental builds that start right there
('make -C $(objtree)'); builds starting in $(srctree) reset
$(objtree)/Makefile to its original content.
Further, $(KBUILD_EXTMOD_OUTPUT)/Makefile was not generated any more at
all.
This commit restores the previous kbuild behaviour prior to commit
c9bb03ac2c ("kbuild: reduce output spam when building out of tree")
but leaves in-place the use of filechk for output spam reduction.
Fixes: c9bb03ac2c ("kbuild: reduce output spam when building out of tree")
Reported-by: Anish Rashinkar <rashinkar.anish@gmail.com>
Closes: https://lore.kernel.org/r/CAOESE2Q2-0KUDaM0mUo+c_F-tMaUsBZ-gpnhdoe0rmYdgnnuJQ@mail.gmail.com
Cc: stable@vger.kernel.org
Tested-by: Philipp Hahn <p.hahn@avm.de>
Reviewed-by: Philipp Hahn <p.hahn@avm.de>
Signed-off-by: Nicolas Schier <n.schier@fritz.com>
Signed-off-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20260723105845.1704689-2-nsc@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Maciej Fijalkowski says:
====================
xsk: fix AF_XDP multi-buffer Tx descriptor reclaim
This series fixes several AF_XDP multi-buffer Tx paths where descriptors
consumed from the Tx ring are not consistently returned to userspace
through the completion ring when the packet is later dropped as invalid.
The affected cases are invalid or oversized multi-buffer Tx packets in
both the generic and zero-copy paths. In these cases, the kernel can
consume one or more Tx descriptors while building or validating a
multi-buffer packet, then drop the packet before it reaches the device.
Userspace still owns the UMEM buffers only after the corresponding
addresses are returned through the CQ. Missing completions therefore
make userspace lose track of those buffers.
The generic path fixes cover following related cases:
* partially built multi-buffer skbs dropped by xsk_drop_skb();
continuation descriptors left in the Tx ring after xsk_build_skb()
reports overflow;
* invalid descriptors encountered in the middle of a multi-buffer
packet, including the offending invalid descriptor itself.
The zero-copy path is handled separately. The batched Tx parser now
distinguishes descriptors that can be passed to the driver from
descriptors that are consumed only because they belong to an invalid
multi-buffer packet. Reclaim-only descriptors are written to the CQ
address area and published in completion order, after any earlier
driver-visible Tx descriptors.
The last two patches update xskxceiver so the tests account invalid
multi-buffer Tx packets as descriptors that must be reclaimed, while
still not expecting those invalid packets on the Rx side.
This is a follow-up to Jason's changes [0] which were addressing generic
xmit only and this set allows me to pass full xskxceiver test suite run
against ice driver.
====================
Link: https://patch.msgid.link/20260719135609.147823-1-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Invalid Tx descriptors are now returned through the completion ring,
regardless of whether they form a standalone packet or belong to an
invalid multi-buffer packet.
The selftests previously counted only descriptors belonging to valid
packets, with a special exception for some invalid multi-buffer packets
in verbatim streams. This undercounts completion entries when a
standalone invalid descriptor or another invalid packet is reclaimed by
the kernel.
Keep valid_pkts as the number of packets expected on the Rx side, but
count every descriptor submitted to the Tx ring in valid_frags, as every
such descriptor is now expected to be returned through the completion
ring.
Make fragment counting in verbatim mode follow the packet boundary
instead of stopping at the first invalid fragment. Update custom stream
generation so an invalid middle fragment terminates the generated Rx
packet while Tx completion accounting still covers the complete invalid
packet.
Also add explicit end fragments after invalid middle descriptors. This
exercises the kernel drain logic and verifies that subsequent valid
packets are not interpreted as continuations of the invalid packet.
Reviewed-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260719135609.147823-7-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The too-many-frags test describes a packet that is valid from the Tx
ring ownership point of view, but invalid for transmission because it
exceeds the supported number of fragments.
Keep the generated Tx descriptors valid so that __send_pkts() accounts
them as outstanding descriptors that must be reclaimed through the CQ.
Then mark the corresponding Rx packet invalid so the test still does
not expect the oversized packet to appear on the receive side.
Add a valid synchronization packet after the oversized packet so the
test can verify that the Tx path drains the bad packet and resumes at
the next packet boundary.
Reviewed-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260719135609.147823-6-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The zero-copy Tx batch parser stops when it encounters an invalid
descriptor. If this happens after one or more continuation descriptors,
the Tx consumer can be advanced past fragments that are neither submitted
to the driver nor returned to userspace through the completion ring.
A similar problem occurs when a packet exceeds xdp_zc_max_segs. The
descriptors consumed up to the limit are released without completion, and
the remaining continuation descriptors can subsequently be interpreted
as the beginning of another packet.
Parse Tx batches in packet units and distinguish descriptors belonging to
complete valid packets from descriptors consumed while draining an
invalid or oversized packet. Return the former to the driver and append
the latter to the CQ address area so userspace can reclaim their UMEM
frames.
Treat a standalone invalid descriptor as a one-descriptor reclaim-only
packet. Advancing the Tx-ring consumer releases the ring slot, but does
not by itself return ownership of the referenced UMEM frame to userspace.
Once draining starts, continue until the packet's end-of-packet
descriptor is consumed. Preserve the drain state on the socket when EOP
has not yet been supplied, so draining can continue during a later call.
Leave incomplete but otherwise valid packets on the Tx ring.
Shared-UMEM pools using multi-buffer Tx also need packet-framed parsing.
Walk their Tx sockets one packet at a time, preserving the existing
per-socket fairness scheme, instead of using the legacy one-descriptor
fallback. Keep that fallback for shared pools that do not use
multi-buffer Tx. Since the drain state is maintained per socket and both
the singular and shared paths can resume an interrupted drain, changing
the socket list from singular to shared requires no special bind-time
transition.
CQ entries are positional, and drivers may complete only part of the Tx
work returned by xsk_tx_peek_release_desc_batch(). Therefore, reclaim-only
entries cannot be published immediately when earlier driver-visible
descriptors are still outstanding.
Track the number of driver-visible CQ entries preceding the reclaim
entries. Let xsk_tx_completed() publish partial hardware Tx completions,
and publish the reclaim entries only after every earlier Tx descriptor
has completed. Complete a reclaim-only batch immediately when there is no
driver-visible work in front of it, and prevent another Tx batch from
being appended while reclaim entries remain pending.
Also cap batch processing by the size of the pool's temporary descriptor
array, as Tx rings belonging to sockets sharing a UMEM may have different
sizes.
This ensures that every invalid Tx descriptor consumed by the ZC batch
path is either submitted to the driver as part of a valid packet or
returned to userspace without violating CQ completion ordering.
Reviewed-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Fixes: cf24f5a5fe ("xsk: add support for AF_XDP multi-buffer on Tx path")
Link: https://patch.msgid.link/20260719135609.147823-5-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The temporary Tx descriptor array in an XSK buffer pool is currently
sized from the Tx ring of the socket that creates the pool.
This is insufficient for shared-UMEM Tx. A later socket may have a
larger Tx ring and submit a valid multi-buffer packet containing more
descriptors than the first socket's ring, while still remaining within
the device's xdp_zc_max_segs limit.
A packet-framed batch parser bounded by the temporary array cannot reach
the end-of-packet descriptor in that case. It leaves the packet on the
Tx ring and encounters the same packet on every subsequent attempt,
stalling Tx processing for that socket.
Size the temporary descriptor array to the larger of the first Tx ring
and the device's xdp_zc_max_segs capability. This keeps the array large
enough to inspect one maximum-sized valid packet. Larger shared Tx rings
do not require further resizing, as they can be processed over multiple
batches.
Following commit will actually address the data path side.
Fixes: d558196604 ("xsk: support ZC Tx multi-buffer in batch API")
Reviewed-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260719135609.147823-4-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch is inspired by the check[1] from sashiko. It says when
overflow happens, the address of cq to be published is invalid.
Actually the severer thing is the whole process of publishing the
address of cq in this particular case is not right: it should truely
publish the address and advance the cached_prod in cq as long as it
reads descriptors from txq.
The following is the full analysis.
xsk_drop_skb() is called in three places, which all discard a partially
built multi-buffer skb:
1) xsk_build_skb() -EOVERFLOW error path: packet exceeds MAX_SKB_FRAGS
2) __xsk_generic_xmit() post-loop cleanup: an invalid descriptor in
the TX ring prevents the partial packet from completing
3) xsk_release(): socket close while xs->skb holds an incomplete packet
In all three cases, the TX descriptors for the already-processed frags
have been consumed from the TX ring (xskq_cons_release), and CQ slots
have been reserved. However, xsk_drop_skb() calls xsk_consume_skb()
which cancels the CQ reservations via xsk_cq_cancel_locked(). Since
the buffer addresses never appear in the completion queue, userspace
permanently loses track of these buffers.
Fix this by letting consume_skb() trigger the existing xsk_destruct_skb
destructor, which already submits buffer addresses to the CQ via
xsk_cq_submit_addr_locked().
Note that cancelling the descriptors back to the TX ring (via
xskq_cons_cancel_n) is not a appropriate option because an oversized
packet that always exceeds MAX_SKB_FRAGS would be retried indefinitely,
which is an obviously deadlock bug in the TX path.
Also move the desc->addr assignment in xsk_build_skb() above the
overflow check so that the current descriptor's address is recorded
before a potential -EOVERFLOW jump to free_err, consistent with the
zerocopy path in xsk_build_skb_zerocopy().
[1]: https://lore.kernel.org/all/20260425041726.85FB3C2BCB2@smtp.kernel.org/
Fixes: cf24f5a5fe ("xsk: add support for AF_XDP multi-buffer on Tx path")
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260719135609.147823-2-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a regression test for the unix_listen() state check. The key case is
listen() on a bound socket that has already been connected: it is no
longer in TCP_CLOSE or TCP_LISTEN, so it must fail with EINVAL. A
prepare_peercred() call slipped in ahead of that check once left err at 0
and made listen() silently succeed there instead; this guards against a
repeat.
The neighbouring outcomes are covered too so they cannot regress the same
way: a bound socket in TCP_CLOSE listens fine, calling listen() again on a
socket already in TCP_LISTEN is allowed, and an unbound socket fails with
EINVAL.
Each case runs for both listenable socket types (SOCK_STREAM and
SOCK_SEQPACKET) and both pathname and abstract addresses.
Fixes: fd0a109a0f ("net, pidfs: prepare for handing out pidfds for reaped sk->sk_peer_pid")
Signed-off-by: John Ericson <mail@johnericson.me>
Link: https://patch.msgid.link/20260718182903.2295560-2-John.Ericson@Obsidian.Systems
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit fd0a109a0f ("net, pidfs: prepare for handing out pidfds for
reaped sk->sk_peer_pid") inserted a prepare_peercred() call between err
= -EINVAL and the socket-state check in unix_listen(). Since
prepare_peercred() leaves err at 0 on success, listen() on an AF_UNIX
socket that is not in TCP_CLOSE or TCP_LISTEN state (e.g. one that is
already connected) now silently returns success without doing anything,
instead of failing with EINVAL as it did before.
Fixes: fd0a109a0f ("net, pidfs: prepare for handing out pidfds for reaped sk->sk_peer_pid")
Signed-off-by: John Ericson <mail@johnericson.me>
Link: https://patch.msgid.link/20260718182903.2295560-1-John.Ericson@Obsidian.Systems
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nh_rt_cache_flush() walks nh->f6i_list during an RTNL-serialized nexthop
replace without holding nh->lock, racing the unlocked IPv6 route
add/delete that mutate the list under nh->lock and free fib6_info
entries (nh_rt_cache_flush() is inlined into rtm_new_nexthop()):
BUG: KASAN: slab-use-after-free in nh_rt_cache_flush (net/ipv4/nexthop.c:2243)
Read of size 8 at addr ffff888012953e18 by task exploit/146
nh_rt_cache_flush (net/ipv4/nexthop.c:2243)
replace_nexthop (net/ipv4/nexthop.c:2610)
rtm_new_nexthop (net/ipv4/nexthop.c:3323)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7076)
Unlike the other f6i_list walks, this one bumps each route's sernum via
fib6_update_sernum_upto_root(), which needs tb6_lock; taking nh->lock
around it would invert the established tb6_lock -> nh->lock order and
deadlock. As the only purpose is to invalidate cached dsts, bump the
IPv6 sernum for the whole netns with rt_genid_bump_ipv6() instead,
mirroring the rt_cache_flush() already done for IPv4 just above.
Fixes: 081efd1832 ("ipv6: Protect nh->f6i_list with spinlock and flag.")
Reported-by: AutonomousCodeSecurity@microsoft.com
Signed-off-by: Xiang Mei (Microsoft) <xmei5@asu.edu>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260722002951.2614721-2-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fib6_check_nh_list() and __nexthop_replace_notify() walk nh->f6i_list
during an RTNL-serialized nexthop replace without holding nh->lock. IPv6
RTM_NEWROUTE/RTM_DELROUTE run without RTNL and mutate that list under
nh->lock (fib6_add_rt2node_nh(), fib6_purge_rt()), so both walks race a
concurrent route delete that unlinks and frees a fib6_info:
BUG: KASAN: slab-use-after-free in rt6_fill_node.isra.0 (net/ipv6/route.c:5799)
Read of size 4 at addr ffff888014607e64 by task exploit/143
rt6_fill_node.isra.0 (net/ipv6/route.c:5799)
fib6_rt_update (net/ipv6/route.c:6412)
__nexthop_replace_notify (net/ipv4/nexthop.c:2542)
rtm_new_nexthop (net/ipv4/nexthop.c:2554)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7076)
BUG: KASAN: slab-use-after-free in fib6_check_nh_list (net/ipv4/nexthop.c:1605)
Read of size 8 at addr ffff888014a7d068 by task exploit/142
fib6_check_nh_list (net/ipv4/nexthop.c:1605)
rtm_new_nexthop (net/ipv4/nexthop.c:2575)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7076)
Both walks only read the entries and take no tb6_lock, so protect them
with nh->lock; fib6_rt_update() uses gfp_any(), which returns GFP_ATOMIC
under the lock.
Fixes: 081efd1832 ("ipv6: Protect nh->f6i_list with spinlock and flag.")
Reported-by: AutonomousCodeSecurity@microsoft.com
Signed-off-by: Xiang Mei (Microsoft) <xmei5@asu.edu>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260722002951.2614721-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PALC_DSM_FN_TRIGGER_PLDR was defined as BIT(1) (value 2).
acpi_evaluate_dsm() expects a 0-based function index integer (0, 1,
2, ...), whereas acpi_check_dsm() expects a bitmask of supported
function indices (BIT(1), BIT(2), ...).
Because PALC_DSM_FN_TRIGGER_PLDR was defined as BIT(1),
acpi_evaluate_dsm() was evaluating Function Index 2 instead of Function
Index 1, while acpi_check_dsm() was checking for Function Index 1
support.
Fix this by setting PALC_DSM_FN_TRIGGER_PLDR to 1 (the function index)
and passing BIT(PALC_DSM_FN_TRIGGER_PLDR) to acpi_check_dsm().
Fixes: 1ab843135a ("platform/x86: dell-dw5826e: Add reset driver for DW5826e")
Signed-off-by: Surendra Singh Chouhan <kr494167@gmail.com>
Link: https://patch.msgid.link/20260724125533.74751-1-kr494167@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In panthor_fw_load_section_entry(), the data size to copy is calculated
without validating it against the allocated section_size:
section->data.size = hdr.data.end - hdr.data.start;
If a crafted firmware sets data.size larger than the allocated memory,
this could cause a heap buffer overflow in panthor_fw_init_section_mem()
memcpy(section->mem->kmap, section->data.buf, section->data.size);
Additionally, if the section->data.size exceeds the BO size, could this
memset underflow the size calculation, leading to a massive out-of-bounds
zeroing of kernel memory?
memset(section->mem->kmap + section->data.size, 0,
panthor_kernel_bo_size(section->mem) - section->data.size);
Reject section entries whose initial data is larger than the section size.
Fixes: 2718d91816 ("drm/panthor: Add the FW logical block")
Cc: stable@vger.kernel.org
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20260716143939.21903-1-osama.abdelkader@gmail.com
Signed-off-by: Steven Price <steven.price@arm.com>
The Razer Barracuda X 2.4 GHz USB headset dongle (0x1532:0x0552)
reports a minimum volume register value of cval->min = -16800.
In UAC 1/256 dB units, -16800 corresponds to -65.625 dB. However,
stock ALSA misinterprets this raw integer as 1/100 dB units
(-168.00 dB), causing user-space audio servers (PipeWire /
PulseAudio) to map their volume curves against an incorrectly wide
range.
Add an explicit usbmix_dB_map entry overriding Unit 2 to -6562
(-65.62 dB) to accurately report the physical hardware
attenuation bounds.
Signed-off-by: Markus Lindner <lindner.markus@outlook.at>
Link: https://patch.msgid.link/AS8P195MB2142F4EFF83980BD02BA6566E1C12@AS8P195MB2142.EURP195.PROD.OUTLOOK.COM
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The AIBV holds one bit per MSI-X vector for a given function. The size of
the bit vector is derived from the NOI and the AIBVO. If the size of the
AIBV exceeds a single page boundary, then reject the request as we cannot
safely pin the guest AIBV.
Similarly reject the request if the AISB address is not 8-byte aligned as
the architecture requires doubleword alignment for the summary bit address.
Since the AISBO can address up to 64 bits, the size of the AISB can only be
8 bytes for the function. This also ensures the AISB doesn't exceed a
single page boundary.
Fixes: 3c5a1b6f0a ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding")
Cc: stable@vger.kernel.org
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Currently if kvm_zpci_set_airq() fails, kvm_s390_pci_aif_enable() returns
the error code but doesn't do any resource cleanup thus leaking resources.
Fix this by cleaning up all the resources such as the GAITE, AIBV, AISB and
unpinning any pinned pages. While at it, remove dead code that stored FIB
values that were never referenced.
As part of the cleanup, we are also holding the aift_lock a bit longer, as
we hold the lock while executing the MPCIFC instruction. Though this is not
strictly necessary, it means we don't have to drop and re-acquire in the
error case.
Fixes: 3c5a1b6f0a ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding")
Cc: stable@vger.kernel.org
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The airq_iv_create() can return NULL on failure, but the return value was
never checked. If it fails, zdev->aibv will be NULL and fail when
dereferenced in kvm_zpci_set_airq(). Add a NULL check and free the
previously allocated AISB bit and zdev->aisb on failure.
Fixes: 3c5a1b6f0a ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding")
Cc: stable@vger.kernel.org
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
In kvm_s390_pci_aif_enable() two error paths failed to set an error code,
causing the function to return 0 on failure. It also failed to rollback
memory accounting on failure. Fix both by propagating an error code on
failure and calling unaccount_mem() in the cleanup path.
Fixes: 3c5a1b6f0a ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding")
Cc: stable@vger.kernel.org
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The account_mem() and unaccount_mem() functions call get_uid() which
increments the reference count of struct user_struct on every invocation.
But we don't decrement the count by calling free_uid(). It also
accounted/unaccounted the pages against the current->mm. But its possible
the unaccount_mem() can be called from a different process context than the
one that originally pinned the pages.
Let's fix this by storing the pinning process user_struct and mm_struct
when accounting for pinned pages, and subsequently free these resources
when the pages are unpinned.
Fixes: 3c5a1b6f0a ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding")
Cc: stable@vger.kernel.org
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
[borntraeger@linux.ibm.com: Fixed whitespace]
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The MPCIFC instruction doesn't allow registering adapter interrupts without
first unregistering. So reject any request to enable interrupt forwarding
if its already enabled for the zPCI device. This also fixes overwriting and
thus leaking resources when the ioctl is called multiple times for the same
device.
Fixes: 3c5a1b6f0a ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding")
Cc: stable@vger.kernel.org
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The pvr_job_create tracepoint was using pvr_fw_object::fw_addr_offset
to display the firmware address of the render target structure attached
to a job, but that's an offset into the firmware heap, not the expected
full address, which is more useful in general e.g. for cross referencing
against firmware logs.
Use pvr_fw_object_get_fw_addr() to get the full firmware address.
Fixes: c1079aebb4 ("drm/imagination: Add support for trace points")
Reviewed-by: Brajesh Gupta <brajesh.gupta@imgtec.com>
Link: https://patch.msgid.link/20260720-fix-pvr-job-trace-hwrt-v1-1-b24551802efb@imgtec.com
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
rds_tcp_laddr_check() looks up a scoped IPv6 interface with
dev_get_by_index_rcu(), drops the RCU read-side lock, and only then
passes the bare struct net_device * into ipv6_chk_addr().
dev_get_by_index_rcu() only keeps the device alive within the same RCU
read-side section. After rcu_read_unlock(), a concurrent RTM_DELLINK can
free the net_device; ipv6_chk_addr() then dereferences the stale pointer
in __ipv6_chk_addr_and_flags() (e.g. l3mdev_master_dev_rcu(dev)), reading
freed memory.
Keep the RCU read-side lock held across the ipv6_chk_addr() call instead
of dropping it right after the lookup, so the device cannot be freed
while it is in use.
BUG: KASAN: slab-use-after-free in __ipv6_chk_addr_and_flags (... net/ipv6/addrconf.c:1998)
Read of size 8 at addr ffff8880106ec000 by task exploit/153
Call Trace:
...
kasan_report (mm/kasan/report.c:595)
__ipv6_chk_addr_and_flags (... net/ipv6/addrconf.c:1998)
ipv6_chk_addr (net/ipv6/addrconf.c:2031 net/ipv6/addrconf.c:1972)
rds_tcp_laddr_check (net/rds/tcp.c:370)
rds_bind (net/rds/bind.c:248)
__sys_bind (net/socket.c:1920)
__x64_sys_bind (net/socket.c:1956)
do_syscall_64 (arch/x86/entry/syscall_64.c:63)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Fixes: eee2fa6ab3 ("rds: Changing IP address internal representation to struct in6_addr")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260722210203.565803-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When vector_mmsg_rx() discards a packet whose overlay header fails
verify_header(), it frees the skb and continues the loop:
if (header_check < 0) {
dev_kfree_skb_irq(skb);
vp->estats.rx_encaps_errors++;
continue;
}
The normal and short-packet paths fall through to the bottom of the
loop body, which clears the consumed slot and advances the cursors:
(*skbuff_vector) = NULL;
mmsg_vector++;
skbuff_vector++;
The verify_header() < 0 path skips that via continue, so the freed skb
is left in skbuff_vector[] and the cursors do not advance. The next
iteration reads the same slot, gets the freed skb, and frees it again,
producing a refcount underflow / use-after-free in the RX path.
Discard the slot the same way the other paths do before continuing.
Only transports whose verify_header() can return negative are affected:
GRE and L2TPv3 do so on a cookie/session-id mismatch (raw/tap do not),
so any peer on such a transport can trigger it without authentication.
Fixes: 49da7e64f3 ("High Performance UML Vector Network Driver")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The maximum size for a DMA data descriptor is 64KB-1 because the size
field in HW is 16 bits wide. For this reason, transfers fail at 64KB
and beyond.
Lower max_dma_len to 60KB so larger transfers are split into multiple
DMA blocks and do not hit the failing 64KB boundary. 60KB is chosen as
a safe round number below the 64KB-1 hardware limit while satisfying
alignment requirements.
Tested on x1e80100 (Hamoa) with SPI-NOR flash (/dev/mtd0):
Without patch:
dd if=/dev/mtd0 of=/tmp/spi_dump.bin bs=32768 count=2 # works
dd if=/dev/mtd0 of=/tmp/spi_dump.bin bs=65536 count=1 # fails
With patch:
dd if=/dev/mtd0 of=/tmp/spi_dump.bin bs=65536 count=1 # works
Fixes: b5762d9560 ("spi: spi-qcom-qspi: Add DMA mode support")
Cc: stable@vger.kernel.org
Signed-off-by: Vijaya Krishna Nivarthi <vijaya.nivarthi@oss.qualcomm.com>
Link: https://patch.msgid.link/20260722092358.459943-1-vnivarth@qti.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
nft_payload_offload_mask() builds the offload match mask for a payload
expression that covers only part of a header field. For a partial IPv6
address match (field_len = 16, priv_len = 1) that shift is 1 << 120, which
is undefined on the 32-bit int operand. It also trims only one word, so
the remaining words stay 0xffffffff (and when priv_len is a multiple of 4
the trim is skipped entirely), leaving the mask covering more bytes than
the rule matches.
UBSAN: shift-out-of-bounds in net/netfilter/nft_payload.c:278:20
shift exponent 120 is too large for 32-bit type 'int'
...
The match is byte-granular and struct nft_data is zero-initialised, so the
correct mask is simply the first priv_len bytes set to 0xff. Set those
bytes directly and drop the word/shift trimming; this removes the undefined
shift and no longer over-masks the trailing bytes.
Fixes: a5d45bc0dc ("netfilter: nftables_offload: build mask based from the matching bytes")
Reported-by: AutonomousCodeSecurity@microsoft.com
Signed-off-by: Xiang Mei (Microsoft) <xmei5@asu.edu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Sashiko warns that ip_vs_nat_icmp() unconditionally mangles the
payload for embedded non-first IPv4 fragments. The problem is
in the very old inverted pp->dont_defrag check which should not
continue when embedded is a non-first TCP/UDP/SCTP fragment.
Check for embedded non-first fragment is also missing from
ip_vs_out_icmp_v6(), it is needed before any connection
lookups that expect ports after the network headers.
Drop the blocking code from ip_vs_in_icmp_v6() which prevents
ICMPv6 from local clients to use non-MASQ forwarding.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://sashiko.dev/#/patchset/20260720201122.79882-1-ja%40ssi.bg
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The offsets we use to packet headers and payloads should be
based on skb->data. We even already respect non-zero
network offset in ip_vs_fill_iph_skb() but some places
do it wrongly and support only zero offset which is expected
for the IP layer where IPVS has hooks.
Change all places that instead of skb->data use offsets based
on the network header (skb_network_header, ip_hdr, etc) because
this doubles the network offset as noted by Sashiko.
For ip_vs_nat_icmp_v6() we can even rely on the IPv6 header
parsing done by the caller.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://sashiko.dev/#/patchset/20260710143733.29741-2-fw%40strlen.de
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
ip_vs_in_icmp_v6() is missing checksum validation for ICMPv6
packets from clients. In fact, as for TCP/UDP we should
validate the checksum for ICMP packets only when we
mangle the packets on MASQ or on reply for tunnel.
Also, Sashiko points out that handle_response_icmp() being
common for IPv4 and IPv6 is missing the pseudo-header
calculation while validating ICMPv6 messages from real
servers which is a problem if checksum is not validated
by the hardware.
Fix the problems by creating ip_vs_checksum_common_check()
helper and use it for TCP/UDP/ICMP both for IPv4 and IPv6.
Rely on the nf_checksum() for validating the ICMP messages
but use it also for TCP and UDP.
Use correct IP offset for IP_VS_DBG_RL_PKT for TCP/UDP/SCTP.
IPVS packets (TCP/UDP/SCTP/ICMP) do not need checksum
validation on LOCAL_OUT (local clients or local real
servers) and on FORWARD (traffic from servers on LAN).
Do it only on LOCAL_IN, in case nf_checksum() is not
called on PRE_ROUTING.
Also, ip_vs_checksum_complete() can be marked static.
Fixes: 2a3b791e6e ("IPVS: Add/adjust Netfilter hook functions and helpers for v6")
Link: https://sashiko.dev/#/patchset/20260708180315.77413-1-ja%40ssi.bg
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The XT_HASHLIMIT_RATE_MATCH flag mode changes the semantics of the
dsthash_ent structure which represents an entry in the hashtable. There
is a union area which uses a different layout to express the rate match
mode.
Update .checkentry path to validate the XT_HASHLIMIT_RATE_MATCH mode
flag is requested by two or more different rules that refer to the same
hashtable. Otherwise, uninitialized access to the burst field in the
union is possible.
Reject the use of the XT_HASHLIMIT_RATE_MATCH mode flag if set on by
revision less than 3 too.
Fixes: bea74641e3 ("netfilter: xt_hashlimit: add rate match mode")
Reported-and-tested-by: Talha Berk Arslan <talha.anything.info@gmail.com>
Link: https://patch.msgid.link/20260721074629.668-1-talha.anything.info@gmail.com/
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The nft_object rhltable is global, this allows for accessing objects
that are being dismangled from lookup path by other existing netns.
Given the nft_obj_destroy() releases the object inmediately, this might
lead to use-after-free of these objects that are being released.
Make the existing rhltable per table to address this issue to deal with
with the nft_rcv_nl_event() path too.
Update nft_obj_lookup() to take the table as non-const, otherwise,
compiler complains when passing the objname_ht to rhltable_lookup().
Fixes: 4d44175aa5 ("netfilter: nf_tables: handle nft_object lookups via rhltable")
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Synced conns can be created with one forwarding method
and later updated with different one after the dest
server is configured. This needs adjusting the hashing
for node hn1 because only MASQ supports double hashing.
Modify conn_tab_lock() to support seeking for hash node
hn0 together with adding for hn1. By this way we can
safely modify the forwarding method and hn1.hash_key
under bucket lock for the first node hn0. The forwarding
method is also protected by cp->lock as it is part of
cp->flags.
Fix the usage of stale idx/idx2 values in conn_tab_lock
after jumping to the retry label. Instead, use idx/idx2
values just to order the locking for the old/new tables.
Reported-by: Zhiling Zou <roxy520tt@gmail.com>
Link: https://patch.msgid.link/1b914f41d725bc064c9ba9830dc8169329737270.1782540466.git.roxy520tt@gmail.com/
Link: https://sashiko.dev/#/patchset/CALMqdkR704S2BG_QD_bgHTFp2%2B1QCi7n0T4zoZyTo8mDZevYSA%40mail.gmail.com
Fixes: f20c73b046 ("ipvs: use more keys for connection hashing")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Synced connections can be created before their destination exists. When
the destination is later added, ip_vs_bind_dest() copies connection flags
from the destination into cp->flags.
IP_VS_CONN_F_ONE_PACKET connections are not synced. If a synced
connection inherits IP_VS_CONN_F_ONE_PACKET while it is already hashed,
expiry can treat it as a one-packet connection and skip unlinking the
existing conn_tab node, leaving stale hash nodes pointing at a freed
struct ip_vs_conn.
Drop IP_VS_CONN_F_ONE_PACKET from destination flags when binding synced
connections.
Fixes: 26ec037f98 ("IPVS: one-packet scheduling")
Cc: stable@vger.kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Suggested-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Zhiling Zou <roxy520tt@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
mtype_resize() copies comment pointers with memcpy(), not the comment
objects themselves. During the window after an entry has been copied but
before the table swap and backlog replay, the old table is still
published for packet-side updates while the replacement-table entry
already holds the same ip_set_comment_rcu pointer.
If xt_SET --add-set ... --exist hits that old entry in this window,
mtype_add() calls ip_set_init_comment() even though packet-side adds
carry no comment payload. That call frees the shared comment through the
old entry, so the replacement-table entry now holds a stale pointer.
When the queued add is replayed on the new table, mtype_add() calls
ip_set_init_comment() again and strlen() dereferences the stale pointer.
Fix this in mtype_add() by skipping ip_set_init_comment() when
ext->target marks a packet-side add. Userspace adds still update
comments, while packet-side adds can no longer free comment storage
shared with a resize copy.
Fixes: f66ee0410b ("netfilter: ipset: Fix "INFO: rcu detected stall in hash_xxx" reports")
Cc: stable@vger.kernel.org
Signed-off-by: David Lee <david.lee@trailofbits.com>
Assisted-by: Codex:gpt-5.5
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
assoc_array_walk() masks off the bits past shortcut->skip_to_level in the
word that contains skip_to_level, gated on
round_up(sc_level, ASSOC_ARRAY_KEY_CHUNK_SIZE) > skip_to_level.
That guard is wrong in two opposite ways:
- When sc_level is word-aligned (every word after the first) round_up()
is a no-op, so the guard is sc_level > skip_to_level and never fires for
the word that holds skip_to_level. A shortcut that spans more than one
word and ends in the middle of its last word leaves that word untrimmed,
and its stale high bits leak into the dissimilarity word and can steer
the walk down the wrong descendant.
- When sc_level is unaligned (the first word) and skip_to_level sits on
the next chunk boundary, sc_level + CHUNK would exceed skip_to_level and
fire the trim with shift = skip_to_level & CHUNK_MASK == 0, which clears
the whole dissimilarity word and makes a differing shortcut compare
equal.
Use the end of the chunk that contains sc_level instead:
skip_to_level < round_down(sc_level, CHUNK) + CHUNK
For an aligned sc_level whose word holds skip_to_level this now fires (the
first bug); for an unaligned sc_level with skip_to_level on the following
boundary it does not, so shift is never 0 when the branch runs and the trim
never clears the whole word.
Fixes: 3cb989501c ("Add a generic associative array implementation.")
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20260719161505.2423935-4-michael.bommarito@gmail.com
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
keyring_get_key_chunk() loads description bytes into the index chunk low
address first, while keyring_diff_objects() numbers the first differing
bit from the low end and folds the absolute byte index into the level
without removing the inline-prefix offset the level already carries.
The two disagree on byte order and bit position, so the array can be
told two keys first differ at a bit that does not differ in the chunk
the walker uses, letting crafted descriptions collide into one node.
Load the chunk in the order keyring_diff_objects() assumes and drop the
inline-prefix length when folding the byte index into the level. This
only changes the in-memory ordering used to place keys within a keyring;
add, search and read of non-colliding keys are unaffected.
Fixes: f771fde820 ("keys: Simplify key description management")
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20260719161505.2423935-3-michael.bommarito@gmail.com
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
For description-level chunks keyring_get_key_chunk() advances the read
pointer by level * sizeof(long) past the inline prefix but only
bounds-checks the prefix, so a long enough key description is read past
its kmemdup(desc, desc_len + 1) allocation. Compute the full byte
offset and bounds-check the description against it before reading.
The walk only reaches a description-level chunk when two keys collide
through the hash, x, type and domain_tag chunks, so this is reached from
an unprivileged add_key(2) with a crafted pair of same-type keys whose
index hashes collide; KASAN reports a slab-out-of-bounds read.
Fixes: f771fde820 ("keys: Simplify key description management")
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20260719161505.2423935-2-michael.bommarito@gmail.com
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Two correctness and type-hygiene issues exist in the DCP trusted keys
implementation.
First, trusted_dcp_unseal() reads p->key_len from a user-supplied blob
without checking if it exceeds MAX_KEY_SIZE. If a crafted blob provides a
payload_len larger than 128, the subsequent do_aead_crypto() call writes
past the end of the p->key array into the adjacent p->blob buffer within
the same struct trusted_key_payload -- the caller's own input, not
unrelated kernel memory. While not exploitable, this violates strict array
bounds and triggers static analyzers. Fix this by adding a validation
check against MIN_KEY_SIZE and MAX_KEY_SIZE immediately after reading the
length, matching the checks already done in trusted_core.c.
Second, calc_blob_len() calculates a sum in size_t that truncates to
unsigned int on 64-bit platforms. Because the DCP hardware is only present
on 32-bit i.MX SoC platforms, size_t and unsigned int are functionally
equivalent in production, making this truncation harmless in practice.
Nevertheless, updating the return type to size_t (and subsequently updating
'blen' in the seal/unseal paths) resolves type-narrowing warnings and
improves overall code hygiene.
Fixes: 2e8a0f40a3 ("KEYS: trusted: Introduce NXP DCP-backed trusted keys")
Signed-off-by: Fabrice Derepas <fabrice.derepas@canonical.com>
Reviewed-by: David Gstir <david@sigma-star.at>
Reviewed-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20260719163939.3624767-1-fabrice.derepas@canonical.com
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The Acer Aspire AG14-22P has its internal microphone connected to the
ACP as a digital microphone, but the BIOS does not advertise it via the
AcpDmicConnected ACPI property, so the internal microphone does not work
out of the box. Add a DMI quirk to enable it.
Tested on an Aspire AG14-22P (board Dove2_MDU, BIOS V1.03): the acp6x
DMIC card is created and the internal microphone captures audio.
Assisted-by: Claude-Code:claude-fable-5
Signed-off-by: Jorn Baayen <jhbaayen@fastmail.com>
Link: https://patch.msgid.link/20260721151924.30316-1-jhbaayen@fastmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge amd-pstate fixes for 7.2 (7/22/26) from Mario Limonciello:
"* Fix a case blocking amd-pstate from binding
when lowest nonlinear freq == minimum freq
* Stop trying to bind in guests"
* tag 'amd-pstate-v7.2-2026-07-22' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate: Prevent the driver from loading on unsupported hardware
cpufreq/amd-pstate: Loosen requirement on lowest nonlinear frequency != min freq
The user cannot use MTE on VMAs created by mapping a guest_memfd file,
as arch_calc_vm_flag_bits() does not set VM_MTE_ALLOWED.
When creating a guest_memfd backed memslot,
kvm_arch_prepare_memory_region() rejects the memslot if MTE is enabled for
the VM and if guest_memfd has been mapped in a VMA that intersects the
memslot.
However, the documentation for KVM_SET_USER_MEMORY_REGION2 explicitly
states that the only condition for userspace_addr is for it to be a legal
userspace address, but the mapping is not required to be valid nor
populated at memslot creation.
If userspace sets userspace_addr to an address that hasn't been mapped, or
if userspace_addr belongs to a VMA that isn't backed by the guest_memfd
file, or if the VMA doesn't intersect the memslot, memslot creation is
successful and KVM ends up with a VM with MTE and guest_memfd-backed
memslots.
The same happens if the order is reversed: when userspace enables MTE, KVM
does not check if memslots backed by guest_memfd are already present.
Fix both issues by rejecting guest_memfd-backed memslots when MTE is
enabled, and by rejecting MTE when guest_memfd-backed memslots are already
present.
Fixes: 32e200bd6e ("KVM: arm64: Enable support for guest_memfd backed memory")
Tested-by: Fuad Tabba <fuad.tabba@linux.dev>
Reviewed-by: Fuad Tabba <fuad.tabba@linux.dev>
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://patch.msgid.link/20260722090354.94245-1-alexandru.elisei@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fix the disable path in hyp_trace_clock_enable(), which fell through to
re-initialize and reschedule the clock after cancelling the work. Return
early instead.
While at it, cleanup hyp_trace_clock::lock which is unused and
hyp_trace_clock::running which is redundant: the trace_remote framework
already serializes calls to the callback enable_tracing.
Fixes: b22888917f ("KVM: arm64: Sync boot clock with the nVHE/pKVM hyp")
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Reviewed-by: Fuad Tabba <fuad.tabba@linux.dev> (✓ DKIM/linux.dev)
Link: https://patch.msgid.link/20260715105100.3178255-1-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Mitigate a potential failure when inserting a new LPI into the VGIC LPI
xarray.
When vgic_add_lpi() is preparing to register a new LPI, it pre-allocates
an xarray entry using xa_reserve_irq(), so that it can later perform the
insertion under the xarray lock without allocating.
However, since xa_reserve_irq() is called before acquiring such lock,
there is a potential race where xa_reserve_irq() observes a populated
entry, thus not performing the allocation, and another CPU removes that
entry before the xarray lock is grabbed to perform the insertion.
CPU0 (Adding new LPI) CPU1 (Releasing LPI)
===================== ===================
vgic_add_lpi()
/* Entry populated, does not allocate */
xa_reserve_irq(.., intid, ..)
vgic_release_deleted_lpis()
xa_lock_irqsave()
vgic_release_lpi_locked()
xarray node freed --> __xa_erase(.., intid)
xa_unlock_irqrestore()
xa_lock_irqsave()
xa_load(.., intid) == NULL
vgic_try_get_irq_ref(NULL) == false
__xa_store(.., intid, irq, 0) <-- xarray node was freed, gfp=0
cannot allocate, returns -ENOMEM
This can happen e.g. if the guest issues a DISCARD while the LPI is
still referenced from a vCPU's active-pending list (ap_list), and the
same INTID is re-mapped via MAPTI.
Mitigate this by passing GFP_NOWAIT to __xa_store(), so that the
allocation can happen under the lock in the rare case that this
condition is hit. Add __GFP_ACCOUNT as well to match xa_reserve_irq()'s
flags.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 1d6f83f60f ("KVM: arm64: vgic: Store LPIs in an xarray")
Signed-off-by: Carlos López <clopez@suse.de>
Link: https://patch.msgid.link/20260715105137.3973823-5-clopez@suse.de
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fix a potential race between decrementing an LPI's reference count and
evicting that structure from the LPI xarray.
LPI structures are maintained in the VGIC LPI xarray (dist->lpi_xa).
When the reference count of an LPI structure drops to zero,
vgic_release_lpi_locked() removes the structure from the xarray and
frees it under the xarray lock.
However, the release of an LPI can race with a concurrent LPI
re-registration with the same INTID via vgic_add_lpi() on another CPU,
since the reference count drop and the xarray eviction are not performed
in a single atomic step. This can happen e.g. if the guest issues a
DISCARD while the LPI is still referenced from a vCPU's active-pending
list (ap_list), and the same INTID is re-mapped via MAPTI.
Particularly, vgic_release_lpi_locked() is called from two distinct
paths: direct release via vgic_put_irq(), and deferred release via
vgic_release_deleted_lpis(). During direct release, the issue can result
in deleting a newly registered LPI from the xarray:
CPU0 (Releasing LPI) CPU1 (Adding new LPI)
==================== =====================
vgic_put_irq()
__vgic_put_irq()
refcount_dec_and_test()
vgic_add_lpi()
xa_lock_irqsave()
old_irq = xa_load(.., intid)
vgic_try_get_irq_ref(old_irq) == false
new IRQ inserted --> __xa_store(.., intid, ..)
xa_unlock_irqrestore()
xa_lock_irqsave();
vgic_release_lpi_locked()
__xa_erase(.., irq->intid) <-- BUG: new IRQ is erased
kfree_rcu(old_irq)
During the deferred release path, the old IRQ can be leaked:
CPU0 (Releasing LPI) CPU1 (Adding new LPI)
==================== =====================
vgic_put_irq_norelease()
__vgic_put_irq()
refcount_dec_and_test()
irq->pending_release = true
vgic_add_lpi()
xa_lock_irqsave()
old_irq = xa_load(.., intid)
vgic_try_get_irq_ref(oldirq) == false
BUG: old IRQ overwritten --> __xa_store(.., intid, ..)
xa_unlock_irqrestore()
vgic_release_deleted_lpis()
xa_lock_irqsave()
xa_for_each() { .. } <-- old IRQ with pending_release = true
is gone, so it cannot be released
To fix the direct release path, move the reference count drop inside
the xarray lock, making sure that vgic_add_lpi() never encounters the
to-be-released LPI.
In the deferred release path, the refcount drop must happen under a raw
spinlock, so the xarray lock cannot be grabbed, and the same solution
does not work. Instead, update vgic_add_lpi(), so that if it evicts
an LPI from the xarray, it takes on the responsibility of freeing it.
Consequently, an LPI may now be freed concurrently after a deferred
release drops the refcount, so accessing the pending_release field is no
longer safe from use-after-free. Delete all uses of the flag, and update
vgic_release_deleted_lpis() to identify orphaned LPIs purely based on
their refcount.
Reported-by: Claude:claude-opus-4-6
Fixes: 3a08a6ca7c ("KVM: arm64: vgic-v3: Use bare refcount for VGIC LPIs")
Fixes: d54594accf ("KVM: arm64: vgic-v3: Erase LPIs from xarray outside of raw spinlocks")
Signed-off-by: Carlos López <clopez@suse.de>
Link: https://patch.msgid.link/20260715105137.3973823-4-clopez@suse.de
Signed-off-by: Marc Zyngier <maz@kernel.org>
idr_alloc() is called with GFP_KERNEL inside idr_lock(), which holds a
spinlock. GFP_KERNEL allows the allocator to sleep, triggering a
sleeping-while-atomic bug.
Fix by using idr_preload(GFP_KERNEL) before taking the lock to
pre-allocate memory in a sleepable context, then idr_alloc() with
GFP_NOWAIT inside the spinlock-protected section.
Fixes: 621191d709 ("Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs")
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The duplicate routing entry check in mshv_update_routing_table() uses
guest_irq_num != 0 to detect whether a GSI slot is already occupied.
This fails for GSI 0 because its guest_irq_num is 0 both when the slot
is unused (zero-initialized) and when legitimately assigned. As a
result, duplicate entries for GSI 0 are silently accepted, with the
second entry overwriting the first — corrupting the routing table
without any error reported to userspace.
While GSI 0 (legacy timer) is unlikely to appear in MSI-based routing
in practice, the check is semantically wrong — it conflates
"uninitialized" with "GSI number 0." Use girq_entry_valid instead,
which is explicitly set to true when an entry is populated and remains
zero for unused slots regardless of the GSI number.
Fixes: 621191d709 ("Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs")
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
vmbus_irq_initialized is only true if the registration of the per-CPU
threads succeeded. If it failed, the whole registration aborts and the
vmbus_exit() path is never called.
Remove vmbus_irq_initialized.
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
lockdep_hardirq_threaded() is supposed to be used within IRQ core code
and not within drivers. It is not obvious from within the driver, that
this is the only interrupt service routing and that it is not shared
handler.
Replace lockdep_hardirq_threaded() with a lockdep annotation limiting
threaded context on PREEMPT_RT to __vmbus_isr().
Fixes: f8e6343b7a ("Drivers: hv: vmbus: Use kthread for vmbus interrupts on PREEMPT_RT")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
mshv_vtl_hvcall_call() copies output_size bytes to userspace.
The output page is freshly allocated. Userspace chooses the copyout length.
If the hypercall writes less, the tail can contain stale page data.
Clear the copied range before issuing the hypercall.
Also check both bounce page allocations before either page is used.
Signed-off-by: Yousef Alhouseen <alhouseenyousef@gmail.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
In current code, the coherent_dma_mask for VMBus devices is not set, so
it has the default value of 0, which essentially means "invalid". Because
drivers for VMBus devices do not use dma_alloc_*() functions, the usual
use of the coherent mask does not occur, and no errors result.
However, a valid coherent_dma_mask may be needed even though the drivers
don't use dma_alloc_*() functions. In a CoCo VM, the VMBus storvsc and
netvsc drivers must bounce buffer DMA operations through the swiotlb
because the Hyper-V host can't DMA into encrypted guest memory. If the
kernel is built with CONFIG_SWIOTLB_DYNAMIC and the initial swiotlb size
is small, swiotlb code may need to grow the swiotlb in response to a DMA
mapping request. That growth first allocates a transient pool while the
swiotlb is expanded in the background. The transient pool memory is
allocated from the DMA atomic pools, and the allocation code checks for
a valid coherent_dma_mask. With current code, this check fails, then the
DMA mapping request from the storvsc or netvsc driver fails, and finally
an I/O error occurs.
Fix this problem by setting coherent_dma_mask for VMBus devices at the
same time that dma_mask is set. Being a synthetic bus, VMBus does not
have any restrictions on coherent DMA, so the coherent mask is set to
the full 64 bits for all VMBus devices, just like with dma_mask.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
mtk_hdmi_common_probe() gets the DDC adapter with
of_find_i2c_adapter_by_node() and registers a devm action to release the
adapter device reference with put_device().
The HDMI v2 remove callback also calls i2c_put_adapter() on the same DDC
adapter. This is not paired with of_find_i2c_adapter_by_node(): it drops
the adapter device reference before the devm action drops it again, and
it also puts a module reference that was never taken.
Remove the extra i2c_put_adapter() call and drop the now-empty HDMI v2
remove callback. The common devm action releases the adapter device
reference.
Fixes: 8d0f798862 ("drm/mediatek: Introduce HDMI/DDC v2 for MT8195/MT8188")
Cc: stable@vger.kernel.org
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20260713112957.884640-1-lgs201920130244@gmail.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
mtk_crtc_reset() destroys the current CRTC state only when crtc->state
is non-NULL, but it always converts crtc->state to struct mtk_crtc_state
and passes the result to kfree().
When reset is called without an existing state, container_of(NULL, ...)
does not produce NULL. Keep the mtk state free in the same crtc->state
guard as the helper state destruction.
This issue was found by a static analysis checker and confirmed by
manual source review.
Fixes: 2d267b8189 ("drm/mtk: Use __drm_atomic_helper_crtc_reset")
Signed-off-by: Ruoyu Wang <ruoyuw560@gmail.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20260707150528.2270739-1-ruoyuw560@gmail.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Keep it in sync with the correct definition.
The old code worked by chance.
Fixes: e68bda71a2 ("hyperv: Add new Hyper-V headers in include/hyperv")
Cc: stable@kernel.org
Signed-off-by: Wei Liu <wei.liu@kernel.org>
k1_spi_dma_one() currently submits the TX DMA descriptor to the DMA engine
before preparing the RX DMA descriptor. If preparing the RX descriptor
subsequently fails, the function jumps to the fallback error path without
canceling or aborting the already submitted TX DMA descriptor.
Fix this by preparing both the TX and RX descriptors before submitting
either of them to the DMA engine.
Fixes: efcd8b9d11 ("spi: spacemit: introduce SpacemiT K1 SPI controller driver")
Reviewed-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Surendra Singh Chouhan <kr494167@gmail.com>
Link: https://patch.msgid.link/20260722162444.11415-1-kr494167@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This requirement was introduced by commit 8f8b42c1fc ("cpufreq:
amd-pstate: optimize the initial frequency values verification")
specifically to aid in debugging BIOS issues with invalid _CPC tables
on some older systems.
This requirement is too tight for new systems though as some systems
actually have lowest nonlinear frequency identical to minimum
frequency. Allow that combo to work.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20260715174318.18235-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <superm1@kernel.org>
Add a new function to insert a pair of expectations, this is required by
the SIP and H323 NAT helpers. The spinlock is held to check if there is
a slot for both expectations, in such case, insert them.
This removes the need for nf_ct_unexpect_related() inside the loop to
find a pair of consecutive ports, otherwise inserting expectations whose
dead flag is already set on can happen.
Bump master_help->expecting for the expectation class after checking if
the expectation fits in the master expectation list, which is needed for
this new _pair() function variant to run the eviction routine including
the preallocated slot for the first expectation in the pair.
Fixes: b8b09dc2bf ("netfilter: nf_conntrack_expect: use conntrack GC to reap expectations")
Reported-by: Jaeyeong Lee <iostreampy@proton.me>
Link: https://patch.msgid.link/178377968720.33756.12204817361601593230@proton.me/
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The IPIP and IP6IP6 tunnel tests call check_counters() to verify
flowtable offloading occurred, but the flow-add rule only matches
meta oif "veth1". When traffic is routed through a tunnel device,
oif is the tunnel interface (tun0, tun6, etc.), not veth1, so
the flow-add rule never fires, no flowtable entry is created,
and counters stay at zero — producing a silent false pass.
Fix by adding tunnel-specific flow-add rules for each tunnel
interface. These match TCP dport 12345 traffic before the bare
accept rule, set ct mark, add the flow to the flowtable, and
increment routed_orig. The existing routed_repl rule on veth0
already handles the reply direction since decapsulated reply
packets exit through the physical interface.
Also add check_counters() for the IP6IP6 non-VLAN and
IP6IP6-over-VLAN tests which previously used a bare PASS message.
Fixes: fe8313316e ("selftests: netfilter: nft_flowtable.sh: Add IPIP flowtable selftest")
Fixes: 5e51803521 ("selftests: netfilter: nft_flowtable.sh: Add IP6IP6 flowtable selftest")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
sip_help_tcp() stores the size change of each NAT-rewritten SIP message
in s16 diff and accumulates it in s16 tdiff, but a single message can
grow by more than S16_MAX while the packet stays under the 65535
enlarge_skb() limit: nf_nat_sip() rewrites every matching URI, and a long
Contact list expands the message by tens of kilobytes. diff then wraps,
and "datalen = datalen + diff - msglen" yields a huge unsigned datalen,
so the next iteration's ct_sip_get_header() reads past the linearized skb
tail.
Widen diff, tdiff and the seq_adjust hook to s32. Both are bounded by the
65535 byte packet limit, and the seqadj core is already s32
(nf_ct_seqadj_set() takes s32), so no previously accepted input is
rejected.
BUG: KASAN: use-after-free in ct_sip_get_header (net/netfilter/nf_conntrack_sip.c:464)
Read of size 1 at addr ffff888010800000 by task ksoftirqd/1/25
ct_sip_get_header (net/netfilter/nf_conntrack_sip.c:464)
sip_help_tcp (net/netfilter/nf_conntrack_sip.c:1694)
nf_confirm (net/netfilter/nf_conntrack_proto.c:183)
nf_hook_slow (net/netfilter/core.c:619)
ip6_output (net/ipv6/ip6_output.c:246)
ip6_forward (net/ipv6/ip6_output.c:690)
ipv6_rcv (net/ipv6/ip6_input.c:351)
__netif_receive_skb_one_core (net/core/dev.c:6212)
process_backlog (net/core/dev.c:6676)
__napi_poll (net/core/dev.c:7735)
net_rx_action (net/core/dev.c:7955)
handle_softirqs (kernel/softirq.c:622)
run_ksoftirqd (kernel/softirq.c:1076)
...
Fixes: f5b321bd37 ("netfilter: nf_conntrack_sip: add TCP support")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Link: https://patch.msgid.link/netfilter-devel/20260712234201.3213635-1-xmei5@asu.edu
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Commit 16a03c71bb ("cpufreq: schedutil: Merge initialization code of
sg_cpu in single loop") merged the per-CPU initialization and the
utilization-hook registration into a single loop in sugov_start().
For a shared cpufreq policy this re-introduces the race originally fixed
by commit ab2f7cf141 ("cpufreq: schedutil: Fix sugov_start() versus
sugov_update_shared() race").
The scheduler's util path reaches the hook under RCU-sched and never takes
policy->rwsem, so the rwsem held across sugov_start() cannot serialize the
two. Once the first CPU's hook is published, sugov_update_shared() may run
and, via sugov_next_freq_shared(), read/write each sibling sugov_cpu
(iowait_boost, util, bw_min, ...) concurrently with the memset() still
initializing them, with no lock common to both sides: the update side holds
sg_policy->update_lock while the init side holds only policy->rwsem, which
the scheduler's util path never takes.
The walk only accesses scalar members, never a pointer like ->sg_policy,
so it does not crash today; it merely uses stale (or zero on first start)
values that skew the frequency selection and tracepoints. It is still a
genuine data race, and a latent crash once any pointer member is
dereferenced there.
Restore the two-phase approach: initialize all per-CPU structures first,
and only then publish the per-CPU utilization update hooks.
Fixes: 16a03c71bb ("cpufreq: schedutil: Merge initialization code of sg_cpu in single loop")
Cc: stable@vger.kernel.org
Signed-off-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/20260716115159.848403-1-zhongqiu.han@oss.qualcomm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
cppc_cpufreq_update_perf_limits() reads policy->min and policy->max
without holding the policy lock. The cpufreq core updates those fields
with separate stores, so a reader can observe the old minimum together
with the new maximum and construct MIN_PERF greater than MAX_PERF.
Read both fields once and, if the lockless snapshot is inconsistent,
reduce the minimum to the observed maximum. This matches the conservative
correction used by cpufreq_driver_resolve_freq() and ensures that CPPC
never receives an inverted limit pair.
Fixes: ea3db45ae4 ("cpufreq: cppc: Update MIN_PERF/MAX_PERF in target callbacks")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/20260722093825.1030594-3-christian.loehle@arm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI 6.2, Section 6.2.11.2 permits _CPC registers to use flexible
address spaces. Linux advertises that capability through _OSC and parses
the address space of each _CPC register independently. A directly
accessible DESIRED_PERF combined with PCC-backed limits is therefore a
valid configuration.
cppc_allow_fast_switch() only checks DESIRED_PERF, although the fast-switch
callback passes DESIRED_PERF, MIN_PERF and MAX_PERF to cppc_set_perf(). If
a limit uses PCC, that function can sleep while called from scheduler
context.
Allow fast switching only when every supported control used by the
callback has an address space already accepted for fast access. Check the
complete policy domain, including initialized CPUs that are currently
offline and may later become the policy's managing CPU.
Fixes: 658fa7b1c4 ("ACPI: CPPC: Add cppc_get_perf() API to read performance controls")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/20260722093825.1030594-2-christian.loehle@arm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Setting up the interface when suspended/resuming fails on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: New USB device found, idVendor=0124, idProduct=0c21
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: USB Headphone
usb 1-1: Manufacturer: Generic
usb 1-1: SerialNumber: 20210726905926
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/TYUPR06MB6217CBB68C8F868C076A4353D2C12@TYUPR06MB6217.apcprd06.prod.outlook.com
The MSI Crosshair A16 HX D7WFKG has an internal digital microphone
connected through AMD ACP6x, but the system does not expose the
AcpDmicConnected ACPI property. As a result, acp_yc_mach does not bind
and no DMIC capture device is created.
Add a DMI quirk for this model. This was tested on a system with board
MS-15PL, BIOS E15PLAMS.10B, and AMD ACP6x rev 0x62. After applying the
quirk, the internal microphone appears as an acp6x DMIC capture device
and records correctly.
Signed-off-by: 郑鸿源 <spark_psc@outlook.com>
Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20260721-master-v1-1-6f56d5a54d96@outlook.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A bug was reported when rtla-timerlat-top tool performs on-threshold
actions, even though no threshold was hit. This is reproduced even if no
threshold is set at all:
$ rtla timerlat top -q -c 0 --on-threshold shell,command='echo BAD'
BAD
Timer Latency
...
The bug is due to incorrect logic in timerlat_top_bpf_main_loop().
The loop uses timerlat_bpf_wait(), the return values of which are:
- > 0 (number of ringbuffer entries): at least 1 CPU hit threshold
- = 0: time out
- < 0: wait was interrupted by a signal
Commit 3138df6f0c ("rtla/timerlat: Exit top main loop on any non-zero
wait_retval") changed the condition for "threshold hit" from
"wait_reval == 1" (exactly 1 CPU hit threshold) to "wait_retval != 0",
to fix a race where multiple CPUs hit the threshold at the same time.
That also made it incorrectly include a signal (< 0), coming from either
duration expired (SIGALRM) or user interrupt (SIGINT).
Check for wait_retval greater than zero in the if condition to cover all
return values correctly.
Fixes: 3138df6f0c ("rtla/timerlat: Exit top main loop on any non-zero wait_retval")
Reported-by: Attila Fazekas <afazekas@redhat.com>
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20260713141047.687877-1-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
ntfs_non_resident_attr_shrink() shrinks attribute sizes but fails to
trim the page cache. This leaves orphaned dirty folios beyond the new
end of the attribute, leading to writeback failures (-ENOENT), data
loss, and $EA chain corruption.
Fix this by truncating the page cache to the new size immediately after
updating the sizes, preventing writeback from flushing out-of-range folios.
Fixes: 495e90fa33 ("ntfs: update attrib operations")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Add a shared helper to safely convert runlist element counts to byte sizes
using overflow checks, and use it in both ntfs_rl_realloc() and
ntfs_rl_realloc_nofail().
Fixes: 11ccc9107d ("ntfs: update runlist handling and cluster allocator")
Co-developed-by: Alper Mudar <kommandant_alper@proton.me>
Signed-off-by: Alper Mudar <kommandant_alper@proton.me>
Tested-by: Alper Mudar <kommandant_alper@proton.me>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Commit 5387bd9581 ("btrfs: raid56: remove sector_ptr structure")
converted the bio-list membership checks from sector pointers to
physical addresses. The two conversions in rmw_assemble_write_bios()
kept their polarity (skip the sector when it is NOT in the bio list,
i.e. when there is nothing to write), but scrub_assemble_read_bios()
has the opposite polarity -- skip the sector when it IS in the bio
list, because then there is nothing to read -- and the conversion
flipped it:
- sector = sector_in_rbio(rbio, stripe, sectornr, 1);
- if (sector)
+ paddr = sector_paddr_in_rbio(rbio, stripe, sectornr, 1);
+ if (paddr == INVALID_PADDR)
continue;
Since a parity-scrub rbio's bio list only holds the empty completion
bio, the result is that scrub_assemble_read_bios() submits no reads at
all. finish_parity_scrub() then compares the parity it computes from
the (cached, correct) data stripes against whatever happens to be in
the freshly allocated, uninitialized stripe pages:
- if the garbage differs from the computed parity, the sector is
"repaired" and written back -- accidentally producing the correct
on-disk result;
- if a recycled page happens to still hold the old (correct) parity
content, the sector is deemed clean, dropped from dbitmap, and the
actually-corrupt on-disk parity is left in place. (Scrub reports
no errors either way: there is no counter for P/Q corruption by
design, so the bug here is purely the failure to read and repair.)
The second case is intermittent because it depends on page-allocator
recycling. Observed with fstests btrfs/297 (raid5, 2 devices): the
corrupted P stripe intermittently stays corrupt after a scrub --
roughly 1/10 runs on x86-64 KVM and up to 7/8 on a UML build whose
timing favors page reuse.
Since the bio-list check can never be true for a parity-scrub rbio --
raid56_parity_alloc_scrub_rbio() adds a single empty completion bio
(asserting bi_size == 0), bio_paddrs[] is only populated by
index_rbio_pages() which is never called for BTRFS_RBIO_PARITY_SCRUB,
and rbio_can_merge() refuses to merge rbios of different operations --
remove the dead check entirely and assert the invariant instead, as
suggested by Qu Wenruo.
After this fix the injected corruption is read, detected and repaired
in every run (8/8 UML, 10/10 KVM), and the new assertion never fires
across the full fstests raid group.
Fixes: 5387bd9581 ("btrfs: raid56: remove sector_ptr structure")
CC: stable@vger.kernel.org # 7.1+
Suggested-by: Qu Wenruo <quwenruo.btrfs@gmx.com>
Assisted-by: Claude:claude-fable-5
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mykola Lysenko <nickolay.lysenko@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A fully truncated ordered extent (truncated_len == 0) wrote no data, so its
->csum_list is empty and btrfs_finish_ordered_zoned() trips:
assertion failed: !list_empty(&ordered->csum_list), in fs/btrfs/zoned.c:2141
Since commit 66ff4d366e a short or cancelled direct IO write finishes the
unsubmitted ordered extent as truncated with uptodate = true instead of
setting BTRFS_ORDERED_IOERR, so it now reaches btrfs_finish_ordered_zoned()
rather than being skipped by the IOERR check in btrfs_finish_ordered_io().
generic/208 hits this on a zoned filesystem.
Return early for these, like the BTRFS_ORDERED_PREALLOC case; there is no
zone append result to record and btrfs_finish_one_ordered() skips them too.
Fixes: 66ff4d366e ("btrfs: fix false IO failure after falling back to buffered write")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[COMPILER WARNING]
With GCC 11.5.0 and KASAN enabled on ARM, the following warning is
triggered during compiling:
In file included from ./include/asm-generic/rwonce.h:26,
from ./arch/arm64/include/asm/rwonce.h:81,
from ./include/linux/compiler.h:369,
from ./include/linux/array_size.h:5,
from ./include/linux/kernel.h:16,
from fs/btrfs/ioctl.c:6:
In function ‘instrument_copy_from_user_before’,
inlined from ‘_inline_copy_from_user’ at ./include/linux/uaccess.h:184:2,
inlined from ‘copy_from_user’ at ./include/linux/uaccess.h:222:9,
inlined from ‘btrfs_ioctl_get_csums.isra’ at fs/btrfs/ioctl.c:5220:6:
./include/linux/kasan-checks.h:38:27: warning: ‘args’ may be used uninitialized [-Wmaybe-uninitialized]
38 | #define kasan_check_write __kasan_check_write
./include/linux/instrumented.h:146:9: note: in expansion of macro ‘kasan_check_write’
146 | kasan_check_write(to, n);
| ^~~~~~~~~~~~~~~~~
fs/btrfs/ioctl.c: In function ‘btrfs_ioctl_get_csums.isra’:
./include/linux/kasan-checks.h:20:6: note: by argument 1 of type ‘const volatile void *’ to ‘__kasan_check_write’ declared here
20 | bool __kasan_check_write(const volatile void *p, unsigned int size);
| ^~~~~~~~~~~~~~~~~~~
fs/btrfs/ioctl.c:5201:43: note: ‘args’ declared here
5201 | struct btrfs_ioctl_get_csums_args args;
| ^~~~
[POSSIBLE FALSE ALERTS]
This seems to be a false alert from certain GCC versions.
The @args is immediately over-written by copy_from_user(), and there is
no code touching that @args until copy_from_user() finished correctly.
[WORKAROUND]
Initialize 'args' to zero, which suppresses the warning.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
reserve_chunk_space() stores the return value of
btrfs_zoned_activate_one_bg() in ret. The helper can return 1 after
successfully activating a block group, but ret is later used to decide
whether to reserve metadata for chunk tree updates.
As a result, successful activation skips btrfs_block_rsv_add() and leaves
trans->chunk_bytes_reserved unchanged. Use a separate variable for the
activation result so positive success does not affect the later
reservation. Keep activation failures in ret instead of returning early so
the function uses the common tail path.
Fixes: b6a98021e4 ("btrfs: zoned: activate necessary block group")
CC: stable@vger.kernel.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Guanghui Yang <3497809730@qq.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 7425a28940 ("btrfs: introduce btrfs_bio_for_each_block_all()
helper") uses the new helper to replace the nested loop inside
verify_bio_data_sectors(), which simplifies the code.
However that also changed the behavior of "continue" when a block has no
data checksum.
Previously the "continue" would skip the old for() loop, which would also
increase @total_sector_nr.
Now the "continue" will skip the new btrfs_bio_for_each_block_all()
loop, which doesn't update @total_sector_nr.
This means if we hit a block that has no data checksum, we will skip all
the remaining blocks no matter if they have data checksum.
As @total_sector_nr will never be updated, and that test_bit() will
always return false.
Fix it by increasing @total_sector_nr before calling "continue".
Fixes: 7425a28940 ("btrfs: introduce btrfs_bio_for_each_block_all() helper")
Reviewed-by: Daniel Vacek <neelx@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When rescue=ibadroots ignores a failure to load the raid stripe tree root,
fs_info->stripe_root remains NULL. After the rescue mount proceeds, reading
file data that requires the raid stripe tree reaches
btrfs_get_raid_extent_offset().
Currently btrfs_search_slot() handles the NULL root and returns -EINVAL.
This avoids a NULL pointer dereference, but provides no diagnostic and
incorrectly describes missing filesystem metadata as an invalid argument.
Check stripe_root before allocating a path, emit a rate-limited error with
the logical address, and return -EUCLEAN.
Lookups with a valid stripe root are unchanged.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Dongjiang Zhu <zhudongjiang@fnnas.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Mounting with rescue=ibadroots after corrupting the block group tree
root triggers a NULL pointer dereference:
BUG: kernel NULL pointer dereference, address: 0000000000000100
RIP: 0010:btrfs_update_global_block_rsv+0x9d/0x1c0 [btrfs]
Call Trace:
fill_dummy_bgs+0xd4/0x120 [btrfs]
open_ctree+0xc6e/0x1ca0 [btrfs]
btrfs_get_tree+0x50d/0xa40 [btrfs]
The same crash occurs with a corrupted raid stripe tree root, via
btrfs_read_block_groups() instead of fill_dummy_bgs().
[CAUSE]
With rescue=ibadroots, btrfs_read_roots() allows the mount to continue
when either root cannot be read, leaving the corresponding root pointer
NULL while its on-disk feature bit remains set.
btrfs_update_global_block_rsv() then dereferences the missing root based
on the feature bit alone.
[FIX]
Rescue mounts are fully read-only and cannot start transactions, so the
global reserve is never consumed. Under btrfs_is_full_ro(), mark the
reserve as full and return before performing the accounting.
And since we need to check if the fs is mount fully RO, export
fs_is_full_ro() as btrfs_is_full_ro(), and move it to fs.h.
Fixes: 8dbfc14fc7 ("btrfs: account block group tree when calculating global reserve size")
Fixes: 515020900d ("btrfs: read raid stripe tree from disk")
Suggested-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Dongjiang Zhu <zhudongjiang@fnnas.com>
[ Squash the fs_is_full_ro() export commit into this one. ]
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_reset_unused_block_groups() resets a block group's zone and sets
alloc_offset back to 0 so the space can be reused, but it leaves
meta_write_pointer pointing at the previous end of the zone.
Once the block group is reactivated and reused for metadata, newly
allocated tree blocks live before that stale write pointer.
btrfs_check_meta_write_pointer() then sees them behind the write pointer,
so they can never be written out in sequential order: the dirty extent
buffers are stranded and pin their btree_inode folios until unmount.
Reset meta_write_pointer back to the start of the block group for
metadata and system block groups.
Fixes: 453a73c306 ("btrfs: zoned: reclaim unused zone by zone resetting")
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When writing out metadata extent buffers in a zoned filesystem,
btree_writepages() holds fs_info->zoned_meta_io_lock across the whole
writeback loop, including the call to btrfs_check_meta_write_pointer() ->
check_bg_is_active().
For the tree-log block group, check_bg_is_active() may fail to activate
the zone and fall back to btrfs_zone_finish_one_bg() to free an active
zone. That path waits for the running transaction to commit while still
holding zoned_meta_io_lock, but the committer needs that same lock to
write out the tree extents, so the two tasks deadlock:
Task A (kworker, metadata writeback) Task B (fsstress, transaction commit)
------------------------------------ -------------------------------------
wb_workfn() btrfs_commit_transaction(T)
btree_writepages() btrfs_write_and_wait_transaction()
btrfs_zoned_meta_io_lock() btrfs_write_marked_extents()
btrfs_check_meta_write_pointer() btree_writepages()
check_bg_is_active() [treelog_bg] btrfs_zoned_meta_io_lock()
btrfs_zone_finish_one_bg() <blocks on zoned_meta_io_lock,
btrfs_zone_finish() held by Task A>
do_zone_finish()
btrfs_inc_block_group_ro()
btrfs_wait_for_commit()
<blocks waiting for commit
of transaction T, done by
Task B>
The sibling branch in check_bg_is_active() already drops zoned_meta_io_lock
around do_zone_finish() for this exact reason. Do the same in the tree-log
branch: release the lock around btrfs_zone_finish_one_bg() and re-acquire
it afterwards. The lock only protects fs_info->active_{meta,system}_bg,
which this branch does not touch, and ctx->zoned_bg keeps a reference to
the block group across the unlock, so nothing is lost while the lock
is dropped.
This hang occasionally reproduces with fstests generic/475 on a zoned
btrfs filesystem.
Fixes: 13bb483d32 ("btrfs: zoned: activate metadata block group on write time")
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
The following script can lead to unexpected qgroup rescan failure:
# mkfs.btrfs -f -O quota $dev
# mount $dev $mnt
# mount -o remount,rescue=ibadroots $mnt
^^^^^ This above command is expected to fail
# btrfs quota rescan -w $mnt
^^^^^ The above qgroup rescan is not expected to fail
# btrfs qgroup show $mnt
WARNING: qgroup data inconsistent, rescan recommended
Qgroupid Referenced Exclusive Path
-------- ---------- --------- ----
0/5 16.00KiB 16.00KiB <toplevel>
The above short script will be converted to a proper fstests case.
[CAUSE]
Inside btrfs_reconfigure(), if either btrfs_check_options() or
btrfs_check_features() failed, we will always have
BTRFS_FS_STATE_REMOUNTING set for the fs until the next successful
remount.
That BTRFS_FS_STATE_REMOUNTING flag will interrupt several operations,
including:
- Qgroup rescan
- Auto defrag
- Space reclaim
[FIX]
Change the error handling of btrfs_check_options() and
btrfs_check_features() to goto restore label.
Fixes: eddb1a433f ("btrfs: add reconfigure callback for fs_context")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
PAGEMAP_SCAN reports an unpopulated PTE in a uffd-wp VMA as written, but a
range with no page table at all -- a PMD hole -- is skipped:
pagemap_scan_pte_hole() tests p->cur_vma_category, which never carries
PAGE_IS_WRITTEN, so the hole is neither reported nor (under
PM_SCAN_WP_MATCHING) armed.
In a uffd-wp VMA, WP_UNPOPULATED installs uffd-wp markers when protecting
a range, allocating page tables as needed, so an unpopulated slot is
treated as written -- see the pte_none() handling in
pagemap_page_category(). A missing marker therefore means the range was
zapped, e.g. via MADV_DONTNEED. This applies to anon and shmem VMAs.
An anonymous THP is write-protected in place as a huge PMD, so a full-PMD
MADV_DONTNEED clears it to pmd_none -- a hole with no page table -- and
pagemap_scan_pte_hole() misses it. For a MAP_PRIVATE|MAP_ANON mapping
MADV_DONTNEED has fill-with-zeros semantics, so a write-tracking
checkpoint/migration tool (e.g. CRIU) treats the range as unchanged and
keeps its previous contents; after restore or live migration the process
reads stale data instead of zeroes -- data corruption.
Report a hole in a non-hugetlb uffd-wp VMA as written, matching the
pte_none handling in pagemap_page_category(); the existing
PM_SCAN_WP_MATCHING path then arms it via uffd_wp_range().
hugetlb is excluded: pagemap_hugetlb_category() reports an empty hugetlb
entry (huge_pte_none) as not-written, unlike pagemap_page_category(),
which reports pte_none as written. pagemap_scan_pte_hole() fires for a
hugetlb slot only when it has no page table; keeping that not-written
matches how an allocated-but-empty hugetlb entry reads, so the hole and
the empty-entry cases agree within the VMA.
Link: https://lore.kernel.org/20260715144234.442721-2-kirill@shutemov.name
Fixes: 2bad466cc9 ("mm/uffd: UFFD_FEATURE_WP_UNPOPULATED")
Signed-off-by: Kiryl Shutsemau <kas@kernel.org>
Reported-by: Sashiko AI review <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260707151349.92143-1-kirill@shutemov.name
Tested-by: Muhammad Usama Anjum <usama.anjum@arm.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Zenghui Yu <zenghui.yu@linux.dev>
Assisted-by: Claude:claude-fable-5
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
allocate_file_region_entries() tops up resv->region_cache with freshly
allocated file_region descriptors. The allocation uses GFP_KERNEL, so
resv->lock is dropped around it: the new entries are gathered on a
stack-local list head, allocated_regions, and spliced into
resv->region_cache once the lock is re-acquired.
The splice used list_splice(), which moves the entries but does not
re-initialize the source head, so allocated_regions is left pointing at an
entry that now lives on resv->region_cache. The top-up runs in a while
loop that re-checks the cache deficit after re-acquiring the lock. For a
shared mapping the resv_map is shared by every mapper of the hugetlbfs
inode, so a concurrent region_chg()/region_add()/region_del() on the same
resv_map can consume cache entries during the unlocked window and force a
second iteration. That iteration calls list_add() on the stale head and
corrupts the list; with CONFIG_DEBUG_LIST the __list_add_valid() check
trips:
list_add corruption. next->prev should be prev (ffffc900011ff7f8),
but was ffff88814c281460. (next=ffff88814c545640).
kernel BUG at lib/list_debug.c:31!
allocate_file_region_entries+0x191/0x420
region_chg+0x267/0x300
hugetlb_reserve_pages+0x387/0xc80
hugetlbfs_file_mmap+0x2ce/0x3f0
mmap_region+0x1348/0x1a80
do_mmap+0x85e/0xb90
vm_mmap_pgoff+0x18c/0x330
ksys_mmap_pgoff+0x2a1/0x3e0
do_syscall_64+0xd7/0x420
Without CONFIG_DEBUG_LIST the bad list_add() silently links a kernel-stack
address into resv->region_cache, leading to later use-after-free.
This was observed as a real host panic on a dense KVM host where a QEMU
guest-RAM hugetlbfs file was mapped MAP_SHARED by both QEMU and a separate
SPDK/DPDK vhost-user target, generating concurrent region_* traffic on one
shared resv_map.
Use list_splice_init() so the source head is re-initialized empty after
each splice, making the retry loop safe.
Link: https://lore.kernel.org/20260713171456.300518-2-caixiangfeng@bytedance.com
Fixes: d3ec7b6e09 ("mm/hugetlb: use list_splice to merge two list at once")
Signed-off-by: Xiangfeng Cai <caixiangfeng@bytedance.com>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Cc: Baoquan He <baoquan.he@linux.dev>
Cc: David Hildenbrand <david@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The mglru page table walker batches per-generation size deltas in
walk->nr_pages while walking page tables without holding the lruvec lock.
The reset_batch_size() later folds those deltas into walk->lruvec under
the lruvec lock.
The page table walker can run concurrently with the memcg reparenting path
as follows:
CPU0 CPU1
==== ====
walk_mm
--> walk_page_range
--> update_batch_size
--> walk->nr_pages += delta
mem_cgroup_css_offline
--> memcg_reparent_objcgs
--> lock lruvec
lru_gen_reparent_memcg
--> reparent child folios to parent
unlock lruvec
lock lruvec
reset_batch_size
--> child lrugen->nr_pages += delta
This will trigger the following warning in lru_gen_exit_memcg():
VM_WARN_ON_ONCE(memchr_inv(lruvec->lrugen.nr_pages, 0,
sizeof(lruvec->lrugen.nr_pages)));
And the user-visible impact of underestimated nr_pages in MGLRU was
premature OOMs because MGLRU does not try to reclaim memory when nr_pages
reaches zero, but there are still more pages.
To fix it, make reset_batch_size() check CSS_DYING under RCU before
flushing the pending batch. A non-dying memcg keeps the original lruvec
stable against RCU-delayed offlining; a dying memcg redirects the deltas
to the first non-dying ancestor.
Link: https://lore.kernel.org/20260710154318.75388-1-qi.zheng@linux.dev
Fixes: f304652609 ("mm: vmscan: prepare for reparenting MGLRU folios")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reported-by: Peiyang He <peiyang_he@smail.nju.edu.cn>
Closes: https://lore.kernel.org/all/5A9E929D82717101+12fcf643-efb8-4b9a-a53a-1e28cc894f0b@smail.nju.edu.cn
Reviewed-by: Harry Yoo (Oracle) <harry@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Wei Xu <weixugc@google.com>
Cc: Yuanchu Xie <yuanchu@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 390ac56cf0 ("ocfs2: add boundary check to
ocfs2_check_dir_entry()") added an out-of-bounds guard using the
caller-supplied 'offset' argument:
if (offset > size - OCFS2_DIR_REC_LEN(1))
return 0;
However, 'offset' and 'size' are not measured against the same base for
all callers. In the block-based lookup path, ocfs2_find_entry_el() passes
'offset' as an absolute offset into the whole directory:
i = ocfs2_search_dirblock(bh, dir, name, namelen,
block << sb->s_blocksize_bits,
bh->b_data, sb->s_blocksize, res_dir);
while 'size' is a single block size (sb->s_blocksize). For any directory
entry located in the second or later block, 'offset' is >=
sb->s_blocksize, so the guard rejects every such entry even though it is
perfectly valid and lies entirely within its block buffer.
This makes mounting fail for filesystems whose system directory spans more
than one block, e.g. a volume formatted with a small block size:
mkfs.ocfs2 -b 512 -C 4096 -N 2 -T datafiles --fs-features=usrquota,grpquota
ocfs2_check_dir_entry:314 ERROR: directory entry (#18: offset=512) too close to end or out-of-bounds
ocfs2_init_local_system_inodes:496 ERROR: status=-22, sysfile=12, slot=0
ocfs2_mount_volume:1757 ERROR: status = -22
The dirent's position within the buffer being validated is ((char *)de -
buf), which is what the rest of the function already uses (via
next_offset) and what must be bounds-checked against 'size'. Compute that
buffer-relative offset and use it for the guard. The subtraction is
reordered to size - buf_offset < OCFS2_DIR_REC_LEN(1) to avoid an unsigned
underflow when size is smaller than the minimal record length.
Link: https://lore.kernel.org/20260710040512.3310736-1-joseph.qi@linux.alibaba.com
Fixes: 390ac56cf0 ("ocfs2: add boundary check to ocfs2_check_dir_entry()")
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Dmitry Antipov <dmantipov@yandex.ru>
Tested-by: Dmitry Antipov <dmantipov@yandex.ru>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Heming Zhao <heming.zhao@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
copy_hugetlb_page_range() clears the uffd-wp bit of migration and hwpoison
entries with huge_pte_clear_uffd_wp(), which operates on the present-PTE
bit position. Swap entries keep the uffd-wp state elsewhere -- the
migration branch reads and sets it with pte_swp_uffd_wp() and
pte_swp_mkuffd_wp() -- and the present-PTE position falls into the swap
payload. On x86-64 it lands in the inverted swap offset, where a
naturally-aligned hugetlb PFN always has the affected bit set, so the
clear advances the encoded PFN by two pages.
No userfaultfd needs to be involved: the clear is guarded only by the
child VMA not being uffd-wp registered, so a plain fork() with an
in-flight hugetlb migration entry (or a poisoned hugetlb page) corrupts
the entry copied into the child. Instrumenting the clear and forking
after MADV_HWPOISON on a 2MB anon hugetlb page shows:
offset before=120e00
offset after =120e02
The fallout is mostly latent: rmap walks match migration entries by folio
range and remove_migration_pte() rebuilds the PTE from the folio, so a
within-folio PFN skew heals once migration completes. But any path that
re-encodes the corrupted offset -- e.g. hugetlb_change_protection()
rewriting a writable migration entry via
make_readable_migration_entry(swp_offset(entry)) -- propagates it.
Migration entries legitimately carry uffd-wp, so clear it with
pte_swp_clear_uffd_wp(), matching copy_nonpresent_pte() and
move_huge_pte().
A hwpoison entry, on the other hand, never carries the uffd-wp bit: it is
installed fresh by make_hwpoison_entry() (try_to_unmap_one() does not
preserve uffd-wp on the hwpoison path) and hugetlb_change_protection()
leaves hwpoison entries untouched. There was nothing to clear there, only
the corruption, so drop the clear entirely.
Link: https://lore.kernel.org/20260708090110.136162-1-kirill@shutemov.name
Fixes: bc70fbf269 ("mm/hugetlb: handle uffd-wp during fork()")
Signed-off-by: Kiryl Shutsemau <kas@kernel.org>
Reported-by: Sashiko AI review <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/all/20260703140011.99E601F000E9@smtp.kernel.org/
Suggested-by: David Hildenbrand <david@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Assisted-by: Claude:claude-fable-5
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
PAGEMAP_SCAN reports an unpopulated pte differently depending on which
path serves the request. The PAGE_IS_WRITTEN fast path in
pagemap_scan_pmd_entry() reports a pte_none as written (and, under
PM_SCAN_WP_MATCHING, arms a marker); pagemap_page_category() returns 0 for
the same pte_none. A request that cannot take the fast path (an extra
category bit, category_anyof_mask or category_inverted) therefore reports
the pte as clean and skips arming it.
A range that was populated and then MADV_DONTNEED'd reads as written via
one mask and clean via another, and in the latter case is not re-armed for
the next round -- an incremental-dump consumer (e.g. CRIU) using a richer
mask drops the zapped range and stops tracking writes to it.
Report pte_none as written in pagemap_page_category() too. A pte_none
carries no uffd-wp marker, i.e. it is not write-protected -- the same
condition under which the present and swap cases already report
PAGE_IS_WRITTEN. The fast path applies no VMA test, so neither does this.
The hugetlb and fully-unpopulated-PMD (no page table) scans have no
PAGE_IS_WRITTEN fast path, so they do not exhibit the per-entry divergence
and are left unchanged.
Add a pagemap_ioctl selftest that populates a range, drops it with
MADV_DONTNEED, and checks that the fast path and the generic
(category_anyof_mask) path both report every page written.
Link: https://lore.kernel.org/20260707151349.92143-1-kirill@shutemov.name
Fixes: 12f6b01a0b ("fs/proc/task_mmu: add fast paths to get/clear PAGE_IS_WRITTEN flag")
Signed-off-by: Kiryl Shutsemau <kas@kernel.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Assisted-by: Claude:claude-fable-5
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit af69016dab ("lib: test_hmm: implement a device release method")
moved the initial dmirror_allocate_chunk() call before cdev_device_add().
That means the struct cdev has not been added yet, so cdev_add() has not
initialized mdevice->cdevice.dev.
The coherent-device range selection uses the device minor to choose
between spm_addr_dev0 and spm_addr_dev1. Reading
MINOR(mdevice->cdevice.dev) before cdev_add() therefore always sees an
uninitialized dev_t. As a result, both coherent devices select the same
physical range, and adding the second device fails due to the overlapping
dev_pagemap range.
Use mdevice->device.devt instead. It is initialized in
dmirror_device_init() before dmirror_allocate_chunk() is called and is the
same dev_t later passed to cdev_device_add().
Link: https://lore.kernel.org/178277581197.172200.16265155329935822153.stgit@skinsburskii
Fixes: af69016dab ("lib: test_hmm: implement a device release method")
Signed-off-by: Stanislav Kinsburskii <skinsburskii@gmail.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: Zenghui Yu (Huawei) <zenghui.yu@linux.dev>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A per-node vmstat counter is pgdat->vm_stat[] plus per-cpu deltas. A
balanced counter can sit split as global=+N / per-cpu=-N.
The folds reconciling the split only walk online nodes, so when
try_offline_node() marks a node offline the per-cpu deltas are stranded.
A subsequent online resets the per-cpu area but not pgdat->vm_stat[],
orphaning the +N permanently. All NR_VM_NODE_STAT_ITEMS are affected.
The existing code zeroes the per-cpu counters and causes a permanent skew.
Fold the stranded deltas instead, before the node rejoins the online set.
The node is not online yet and the hotplug lock is held, so the remote
access to per-cpu values is safe.
Discovered when node compaction hung for a nearly empty node, as the math
to determine throttling broke. Reproduced by repeated memory
hotplug/unplug cycles on a node under pressure: NR_ISOLATED_ANON ratchets
up and never returns to zero.
Link: https://lore.kernel.org/20260627202243.758289-1-gourry@gourry.net
Fixes: 75ef718405 ("mm, vmstat: add infrastructure for per-node vmstats")
Signed-off-by: Gregory Price <gourry@gourry.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
MAX17040 does not report charger state itself, so the driver forwards
POWER_SUPPLY_PROP_STATUS to a supplier power supply. If no supplier is
registered, power_supply_get_property_from_supplier() returns -ENODEV and
leaves the output value untouched.
max17040_get_property() currently ignores that error and returns success,
so userspace can read an uninitialized status value from the battery power
supply. This happens on systems that use the fuel gauge without a charger
supplier relationship in firmware.
Return POWER_SUPPLY_STATUS_UNKNOWN when no supplier provides STATUS, and
propagate other supplier lookup errors.
Fixes: f4b782af61 ("power: max17040: pass status property from supplier")
Cc: stable@vger.kernel.org # 6.7+
Signed-off-by: Jianing Li <m13940358460@163.com>
Link: https://patch.msgid.link/20260701061042.1008-1-m13940358460@163.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Fix a documentation build error by adding a bottom table border:
Documentation/ABI/testing/sysfs-class-power-bd71828:1: ERROR: Malformed table.
No bottom table border found.
============ ===========================================
1 automatic adjustment of input current limit
0 no adjustment of input current limit. This
helps for more unusual power sources like
solar modules. [docutils]
Fixes: e92786dd86 ("power: supply: bd71828: sysfs for auto input current limitation")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20260620011821.3568674-1-rdunlap@infradead.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
On boot, fdt_scan_reserved_mem() saves each dynamically-placed
/reserved-memory subnode into a local array of size
MAX_RESERVED_REGIONS.
If the device tree defines more than MAX_RESERVED_REGIONS
dynamically-placed regions, fdt_scan_reserved_mem() writes past the
end of the local array.
Add a bounds check that logs an error and skips the excess regions,
restoring the original behavior.
Fixes: 8a6e02d0c0 ("of: reserved_mem: Restructure how the reserved memory regions are processed")
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Link: https://patch.msgid.link/20260614133807.2165124-2-ekffu200098@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
In max98090_probe(), the -EPROBE_DEFER check after devm_clk_get() is
broken due to a missing IS_ERR() guard.
The code intends to return -EPROBE_DEFER only when the clock lookup
fails with that specific error. However, without IS_ERR() the check:
if (PTR_ERR(max98090->mclk) == -EPROBE_DEFER)
is called unconditionally, including when devm_clk_get() succeeds and
returns a valid pointer. Calling PTR_ERR() on a valid pointer
reinterprets its address as a signed long; the result is arbitrary
and is almost never equal to -EPROBE_DEFER, so the check silently
does nothing in the success case. When devm_clk_get() fails with
any error other than -EPROBE_DEFER the check is also skipped, leaving
max98090->mclk holding an error pointer with no indication to the caller.
This means a deferred probe will never actually be triggered for this
device, and any non-EPROBE_DEFER clock error is silently swallowed with
the error pointer left in the mclk field.
Fix this by adding the missing IS_ERR() guard around the PTR_ERR() call,
matching the pattern already used in the sibling max98088 and wm8960
drivers.
Fixes: b10ab7b838 ("ASoC: max98090: Add master clock handling")
Signed-off-by: Uday Khare <udaykhare77@gmail.com>
Link: https://patch.msgid.link/20260720104254.14948-1-udaykhare77@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In max98095_probe(), the -EPROBE_DEFER check after devm_clk_get() is
broken due to a missing IS_ERR() guard.
The code intends to return -EPROBE_DEFER only when the clock lookup
fails with that specific error. However, without IS_ERR() the check:
if (PTR_ERR(max98095->mclk) == -EPROBE_DEFER)
is called unconditionally, including when devm_clk_get() succeeds and
returns a valid pointer. Calling PTR_ERR() on a valid pointer
reinterprets its address as a signed long; the result is arbitrary
and is almost never equal to -EPROBE_DEFER, so the check silently
does nothing in the success case. When devm_clk_get() fails with
any error other than -EPROBE_DEFER the check is also skipped, leaving
max98095->mclk holding an error pointer with no indication to the caller.
This means a deferred probe will never actually be triggered for this
device, and any non-EPROBE_DEFER clock error is silently swallowed with
the error pointer left in the mclk field.
Fix this by adding the missing IS_ERR() guard around the PTR_ERR() call,
matching the pattern already used in the sibling max98088 and wm8960
drivers.
Fixes: e3048c3d2b ("ASoC: max98095: Add master clock handling")
Signed-off-by: Uday Khare <udaykhare77@gmail.com>
Link: https://patch.msgid.link/20260720103950.14474-1-udaykhare77@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 0b31f29755 ("phy: rockchip: naneng-combphy: Consolidate SSC
configuration") moved the SSC spread spectrum direction setup into the
new rk_combphy_common_cfg_ssc() helper. That helper returns early when
the 'rockchip,enable-ssc' property is absent, whereas the equivalent
RK3568_PHYREG32 direction writes previously ran unconditionally in the
per-type switch statements, independent of whether SSC modulation was
actually enabled.
As no in-tree board sets 'rockchip,enable-ssc', this changed the behavior
at least for USB3 on RK3576, which now fails to bring up the link.
USB 2.0 still enumerates, but USB 3.0 does not, and the SuperSpeed root
port floods the log every second with:
usb usb2-port1: Cannot enable. Maybe the USB cable is bad?
This was observed on two different RK3576 devices with a CoreChips SL6341
USB 2.0/3.0 hub connected to the USB DRD controller running in host mode.
Perform the SSC direction writes for PCIe/USB3 (and SATA) before the
enable_ssc check so that they always run, as they did before the
consolidation.
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/all/CAKTNdwH_ZMQa-97h+tqdsWqXKtorkFF9wHAMn60-8ZGKuze_Mg@mail.gmail.com/
Fixes: 0b31f29755 ("phy: rockchip: naneng-combphy: Consolidate SSC configuration")
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Tested-by: Liu Changjie <liucj1228@outlook.com>
Link: https://patch.msgid.link/20260714-naneng-ssc-fix-v1-1-1c40a58061ae@flipper.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Shengjiu Wang <shengjiu.wang@nxp.com> says:
Both fsl_asrc_probe() and fsl_easrc_probe() call fsl_asrc_m2m_init()
near the end of their probe functions. On failure, the original code
did a bare return ret, bypassing the existing error labels that call
pm_runtime_disable(). This leaves runtime PM enabled and the device
in an inconsistent state after a failed probe.
Fix both drivers by replacing the bare return with a goto to the
appropriate cleanup label (err_pm_get_sync for fsl_asrc and
err_pm_disable for fsl_easrc), ensuring pm_runtime_disable() is
always called on the probe error path.
Link: https://patch.msgid.link/20260715024758.1252801-1-shengjiu.wang@oss.nxp.com
Mark Brown <broonie@kernel.org> says:
While reviewing another fix for the tas2562 volume control I noticed a
few issues with the put() operation, this series fixes them.
It's also a bit weird that the volume control is defined with twice as
many values as can actually be set, probably the best fix there is to
regnerate the table of volume values with the intermediate values.
Link: https://patch.msgid.link/20260715-asoc-tas2562-put-retval-v1-0-97bf467c924e@kernel.org
The tas2562 digital volume is spread over four registers and is implemented
as lookups into a table so the driver stores the value for the userspace
control in the driver data. This defaults to 0 due to kzalloc() but the
register default is 0x40400000 which maps onto something a bit over the
largest value defined in the lookup table. While it's not an exact match
update the default to the largest value, avoiding user surprise due to a
sudden change on first write.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260715-asoc-tas2562-put-retval-v1-3-97bf467c924e@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA put() operations should return 0 for noop updates and 1 if the
value of the control changed, this is used by the ALSA core to generate
events to userspace. tas2562_volume_control_put() does not implement
this, it just writes whatever value userspace wrote to the device and
returns 0 regardless of what the previous value was. Fix this by
suppressing writes if the value is unchanged and returning 1 if the
writes succeed.
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260715-asoc-tas2562-put-retval-v1-2-97bf467c924e@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Haidar Lee <haidar.lee@adlinktech.com> says:
The 'Digital Volume Control' added in v5.7 has never worked correctly:
the driver writes the 32-bit DVC coefficient LSB first, but the device
latches the whole coefficient on the write to the last byte (DVC_CFG4),
so every volume change applies a mix of the previous coefficient's
upper bytes and the new LSB. Depending on the sequence of values this
mutes the output entirely or plays at full volume regardless of the
requested level.
Debugged on a TAS2562 (ADLINK OSM-520 / MT8189): traced the I2C writes
with ftrace to confirm the driver writes the intended bytes, then
reproduced both behaviours by writing the same coefficients manually in
each byte order. Patch 1 fixes the write order; patch 2 fixes two wrong
entries in the volume lookup table found while debugging this.
Link: https://patch.msgid.link/20260715-tas2562-dvc-fix-v1-0-072b13901b20@adlinktech.com
The float_vol_db_lookup table is supposed to hold
round(10^(dB/20) * 2^30) for every 2 dB step from -110 dB to 0 dB,
which is 56 entries, but it only has 55: the -90 dB entry duplicates
the -92 dB value (0x0000695b) and the -20 dB entry (0x06666666) is
missing altogether. As a result every step between -90 dB and -22 dB
is off by 2 dB, and the control's maximum raw value of 110 indexes one
element past the end of the array.
Replace the duplicated -90 dB entry with the correct value 0x000084a3
and add the missing -20 dB entry, bringing the table to the full 56
entries so index 55 (raw value 110, 0 dB) is in range again.
Fixes: bf726b1c86 ("ASoC: tas2562: Add support for digital volume control")
Cc: stable@vger.kernel.org
Signed-off-by: Haidar Lee <haidar.lee@adlinktech.com>
Link: https://patch.msgid.link/20260715-tas2562-dvc-fix-v1-2-072b13901b20@adlinktech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The TAS2562 applies the 32-bit digital volume coefficient to the
playback path when the last byte, DVC_CFG4 (book 0 page 2 reg 0x0F), is
written. tas2562_volume_control_put() wrote DVC_CFG4 first and DVC_CFG1
(the MSB) last, so every volume change latched a value made of the
previous coefficient's upper three bytes combined with the new LSB; the
remaining bytes only took effect on the next volume change.
In practice the control was unusable: the first setting after power-on
always played at roughly 0 dB no matter what value was requested (the
chip's default upper bytes were still latched), and most subsequent
changes muted the output entirely or produced a distorted, over-unity
gain.
Verified on a TAS2562 (ADLINK OSM-520 / MT8189 board) by tracing the
I2C writes with ftrace and by writing the same coefficients manually in
both byte orders: written MSB-first the register block behaves exactly
as the driver expects, LSB-first reproduces the broken behaviour.
Write the bytes MSB first with DVC_CFG4 last so the complete new
coefficient is latched atomically.
Fixes: bf726b1c86 ("ASoC: tas2562: Add support for digital volume control")
Cc: stable@vger.kernel.org
Signed-off-by: Haidar Lee <haidar.lee@adlinktech.com>
Link: https://patch.msgid.link/20260715-tas2562-dvc-fix-v1-1-072b13901b20@adlinktech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On phy_init() failure the error path fallsthrough to disable_rsts, which
deasserts the controller reset and then enters disable_phys calling
phy_power_off() on PHYs that were never powered on. That corrupts the PHY
power_count and triggers an extra runtime PM put.
Use a separate exit_phys path that unwinds with phy_exit() only and falls
through to disable_clks while the controller remains in reset. Reserve
phy_power_off() for the phy_power_on() failure path only, and skip
masked-out ports in both unwind loops.
On phy_power_on() failure re-assert the controller reset before disabling
clocks and regulators, matching the teardown order used by
ahci_platform_enable_resources() and ahci_platform_disable_resources().
Fixes: 26c8404e16 ("ata: ahci_ceva: fix error handling for Xilinx GT PHY support")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Board files in arch/arm/plat-orion, arch/arm/mach-dove,
arch/arm/mach-mv78xx0 and arch/arm/mach-orion5x still register the
"sata_mv" device with two resources (IORESOURCE_MEM plus IORESOURCE_IRQ).
Those devices are rejected with -EINVAL, so SATA no longer probes on
legacy Marvell Orion/Kirkwood-style boards.
Accept both 1 resource (DT, IRQ fetched via platform_get_irq()) and 2
resources (legacy, IRQ supplied as a second resource) so both probing
paths work.
Fixes: b3b2bec964 ("ata: sata_mv: Fixes expected number of resources now IRQs are gone")
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
When creating a WSL special file (socket, fifo, character or block
device), __ntfs_create() sets FILE_ATTRIBUTE_RECALL_ON_OPEN in ni->flags
as valid_reparse_data() requires for these tags. This flag is
intentionally absent from $FILE_NAME, so the subsequent reload
ni->flags = fn->file_attributes;
drops it from ni->flags, the authoritative copy written back to
$STANDARD_INFORMATION. The on-disk file_attributes becomes 0x00000404
instead of 0x00040404, and after a remount valid_reparse_data() rejects
the reparse point while fsck reports "$REPARSE_POINT data is corrupted".
Preserve the RECALL_ON_OPEN bit across the reload. Symlinks do not set
that bit, so they are unaffected.
Fixes: af0db57d42 ("ntfs: update inode operations")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
On some NXP chipsets, disabling Root Port MSI/MSI-X Capabilities blocks
MSIs originating from Endpoints from reaching the iMSI-RX controller.
To address this hardware bug, commit 3a4e8302e7 ("PCI: imx6: Keep Root
Port MSI capability with iMSI-RX to work around hardware bug") preserves
Root Port MSI and MSI-X Capabilities on i.MX7D, i.MX8MM, and i.MX8MQ
when iMSI-RX is in use.
The same applies to i.MX6Q, i.MX6QP, and i.MX6SX, so preserve Root Port
MSI/MSI-X Capabilities there as well.
Note that preserving these Capabilities means Root Port-originated MSIs
such as AER and PME won't be received due to separate hardware limitations.
Users may need to use workarounds such as passing the 'pcie_pme=nomsi'
command-line parameter.
Fixes: f5cd8a929c ("PCI: dwc: Remove MSI/MSIX capability for Root Port if iMSI-RX is used as MSI controller")
Signed-off-by: Soeren Moch <smoch@web.de>
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Richard Zhu <hongxing.zhu@nxp.com>
Cc: stable@vger.kernel.org # 7.0+
Link: https://patch.msgid.link/20260717033203.2965045-1-hongxing.zhu@oss.nxp.com
Locking is disabled in the regmap config as this driver uses its own
lock. This means that all calls to regmap functions (read or write) must
hold the i2c_lock. The function pca953x_irq_bus_sync_unlock() did not do
this, and it was therefore possible that multiple threads could cause an
incorrect register to be read/written.
A previous patch partly fixed this, but only protected the write to the
interrupt mask register, and not the read from the direction register.
Fixes: bfc6444b57 ("gpio: pca953x: fix pca953x_irq_bus_sync_unlock race")
Cc: stable@vger.kernel.org
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Link: https://patch.msgid.link/20260709045116.2304246-1-mark.tomlinson@alliedtelesis.co.nz
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
We hit the following build error while running the seccomp selftests in
our testing.
CC seccomp_bpf
seccomp_bpf.c: In function ‘UPROBE_setup’:
seccomp_bpf.c:5175:74: error: pointer type mismatch in conditional expression [-Wincompatible-pointer-types]
5175 | offset = get_uprobe_offset(variant->uretprobe ? probed_uretprobe : probed_uprobe);
| ^
seccomp_bpf.c:5175:57: note: first expression has type ‘int (*)(void)’
5175 | offset = get_uprobe_offset(variant->uretprobe ? probed_uretprobe : probed_uprobe);
| ^~~~~~~~~~~~~~~~
seccomp_bpf.c:5175:76: note: second expression has type ‘int (__attribute__((nocf_check)) *)(void)’
5175 | offset = get_uprobe_offset(variant->uretprobe ? probed_uretprobe : probed_uprobe);
| ^~~~~~~~~~~~~
get_uprobe_offset() takes a 'const void *' argument, so cast both
operands to 'void *'.
Fixes: 9ffc7a635c ("selftests/seccomp: validate uprobe syscall passes through seccomp")
Signed-off-by: Kuan-Ying Lee <kuan-ying.lee@canonical.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://patch.msgid.link/20260715053559.28535-1-kuan-ying.lee@canonical.com
Signed-off-by: Kees Cook <kees@kernel.org>
Commit 57fbad15c2 ("stackleak: Rename STACKLEAK to KSTACK_ERASE")
renamed the LKDTM crash type and selftest configuration but missed the
entry in tests.txt.
As a result, the selftest generates STACKLEAK_ERASING.sh, which run.sh
skips because the LKDTM DIRECT trigger only exposes KSTACK_ERASE. Rename
the test entry so the generated runner uses the registered crash type.
Fixes: 57fbad15c2 ("stackleak: Rename STACKLEAK to KSTACK_ERASE")
Signed-off-by: Haofeng Li <lihaofeng@kylinos.cn>
Link: https://patch.msgid.link/tencent_CD80B5F746B6AABD68AF3F1097AD02C96F05@qq.com
Signed-off-by: Kees Cook <kees@kernel.org>
clang recently added support for -Wstringop-overread [1], which is on by
default like -Wfortify-source. This breaks the usage of -Werror in the
fortify tests, resulting in the following false positive warnings in the
kernel build:
warning: unsafe memcmp() usage lacked '__read_overflow2' warning in lib/test_fortify/read_overflow2-memcmp.c
warning: unsafe memcmp() usage lacked '__read_overflow' warning in lib/test_fortify/read_overflow-memcmp.c
warning: unsafe memchr() usage lacked '__read_overflow' warning in lib/test_fortify/read_overflow-memchr.c
Examining the fortify test logs shows a warning like the following in
each of the failed logs:
In file included from lib/test_fortify/read_overflow2-memcmp.c:5:
lib/test_fortify/test_fortify.h:34:2: error: 'memcmp' reading 17 bytes from a region of size 16 [-Werror,-Wstringop-overread]
34 | TEST;
| ^
lib/test_fortify/read_overflow2-memcmp.c:3:2: note: expanded from macro 'TEST'
3 | memcmp(large, small, sizeof(small) + 1)
| ^
1 error generated.
Disable -Wstringop-overread for the fortify tests, as it defeats the
purpose of testing the Linux specific implementation of fortify, like
-Wfortify-source.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2168
Link: 86f2e71cb8 [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260623-fix-test_fortify-for-clang-stringop-overread-v1-1-15ee8342a953@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Commit d1d564ec49 ("gpio: move hogs into GPIO core") made
gpiochip_add_hog() return -EINVAL for hog nodes lacking any of the
'input', 'output-low' or 'output-high' properties. The error is
propagated by gpiochip_hog_lines() and fails registration of the
whole GPIO chip.
The previous OF-specific implementation tolerated such nodes:
of_parse_own_gpio() warned "no hogging state specified, bailing out"
and of_gpiochip_add_hog() stopped processing the node without failing
chip registration.
Some boards deliberately ship hog nodes without a hogging state in
their base devicetree and supply the state via overlay, e.g. the PCIe
slot key selection hogs on the BananaPi R4 Pro added in
commit e309fa232d ("arm64: dts: mediatek: mt7988a-bpi-r4pro: rework
pcie gpio-hog handling"), as the polarity set in the base devicetree
could not be overridden from an overlay.
Booting such a board without an overlay applied now fails to register
the gpiochip. On the BananaPi R4 Pro this means the MT7988A pinctrl
device fails to probe, all peripherals including the console UART
defer forever, and the board finally hangs when clk_disable_unused()
gates the clocks of the UART still in use by earlycon:
gpiochip_add_data_with_key: GPIOs 512..595 (pinctrl_moore) failed to register, -22
mt7988-pinctrl 1001f000.pinctrl: error -EINVAL: Failed to add gpio_chip
...
clk: Disabling unused clocks
(hangs)
Restore the previous behaviour by warning about hog nodes lacking a
hogging state and skipping them instead of failing the registration
of the whole GPIO chip.
Fixes: d1d564ec49 ("gpio: move hogs into GPIO core")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/4c67cf0839ccf57db35a826df6d8fc779531509a.1783974733.git.daniel@makrotopia.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
arm_vsmmu_vsid_to_sid() maps a guest's vSID to a single physical Stream ID
taken from master->streams[0], assuming a device has exactly one stream. A
device with several streams gets only its first one mapped, so a guest vSID
invalidation cannot reach the others' ATC and IOTLB entries; a device with
none makes master->streams a ZERO_SIZE_PTR, read out of bounds.
Add an arm_vsmmu_vdevice_init() op to reject the vDEVICE with -EOPNOTSUPP
when master->num_streams is not one, rather than mapping it silently.
Fixes: d68beb276b ("iommu/arm-smmu-v3: Support IOMMU_HWPT_INVALIDATE using a VIOMMU object")
Link: https://patch.msgid.link/r/b15f2b73520f389f3f57881da2f040e7bdc18876.1783311134.git.nicolinc@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Assisted-by: Claude:claude-opus-4-8
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
iommufd_vdevice_alloc_ioctl() adds the vDEVICE to the viommu->vdevs xarray
with xa_cmpxchg() before the driver's vdevice_init() op runs. That op is
where a driver validates the device and may reject it, but the xarray entry
is already live by then: a concurrent IOMMU_HWPT_INVALIDATE can look it up
with iommufd_viommu_find_dev() and run the driver invalidation path against
a device that vdevice_init() would have refused.
Reserve the index with xa_insert(): it stores a zero entry that reads back
as NULL, and returns -EBUSY on a duplicate virt_id. Run vdevice_init() and
store the vDEVICE pointer only once it succeeds. A failed vdevice_init()
releases the reservation, so lookups observe the vDEVICE only after it is
fully initialized and accepted.
Fixes: ed42eee797 ("iommufd/viommu: Add driver-defined vDEVICE support")
Link: https://patch.msgid.link/r/1e05999347f4bf583edbc6a1312c857d5548708c.1783311134.git.nicolinc@nvidia.com
Cc: stable@vger.kernel.org
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Assisted-by: Claude:claude-opus-4-8
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
iommufd_vdevice_alloc_ioctl() takes idev->igroup->lock, then validates the
driver's vdevice_size against the core structure size with a WARN_ON_ONCE.
On failure that guard jumps to out_put_idev, below out_unlock_igroup, so it
skips the mutex_unlock(), leaving the igroup lock held and deadlocking the
next vDEVICE operation on that group.
Jump to out_unlock_igroup instead.
Fixes: ed42eee797 ("iommufd/viommu: Add driver-defined vDEVICE support")
Link: https://patch.msgid.link/r/e903f775d491296a525097e2a90b3eb6a47cf2ef.1783311134.git.nicolinc@nvidia.com
Cc: stable@vger.kernel.org
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Assisted-by: Claude:claude-opus-4-8
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
iommufd_hwpt_replace_device() calls:
iommufd_auto_response_faults(hwpt, old_handle);
passing the *new* hwpt together with the handle of
the device's *old* domain. This should be a parameter mismatch:
1. Semantically, iommufd_auto_response_faults(x, handle) scans
x->fault's deliver list and response xarray for groups matching
"handle". A group is queued under the hwpt that was attached at
fault-delivery time. old_handle is fetched *before* the domain switch,
so its group lives on old->fault, not on the new hwpt->fault.
2. Historically, the first argument was "old". The routine was
introduced by commit b7d8833677 ("iommufd: Fault-capable hwpt
attach/detach/replace") as __fault_domain_replace_dev() in
fault.c, correctly calling iommufd_auto_response_faults(old, curr).
Commit fb21b1568a ("iommufd: Make attach_handle generic than
fault specific") moved this into iommufd_hwpt_replace_device() in
device.c and swapped it to "hwpt". This should be a refactor regression,
not an intentional change.
Fix this by passing "old" instead.
Link: https://patch.msgid.link/r/9D652384339C69D5+20260710122952.885325-1-peiyang_he@smail.nju.edu.cn
Fixes: fb21b1568a ("iommufd: Make attach_handle generic than fault specific")
Cc: stable@vger.kernel.org
Signed-off-by: Peiyang He <peiyang_he@smail.nju.edu.cn>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
BAM version 1.6.0 and later changed the behavior of the mask field in
command elements for read operations.
In older BAM versions, or prior implementation assumptions, the mask
field was effectively ignored for read commands. However, starting from
BAM v1.6.0, the mask field for read commands is repurposed to carry the
upper 4 bits of the destination address, enabling support for 36-bit
addressing. For write commands, the mask field continues to function as
a traditional write mask.
The current driver sets mask = 0xffffffff for all command elements.
While this works for write operations, it breaks read operations on
BAM v1.6.0+ hardware. In such cases, the hardware interprets the upper
address bits as 0xf, resulting in an invalid destination address
(0xf_xxxxxxxx instead of 0x0_xxxxxxxx).
This leads to failures such as NAND enumeration issues observed on
platforms like IPQ5424.
Fix this by assigning the mask field based on command type:
- For read commands: set mask = 0 (upper address bits = 0)
- For write commands: retain mask = 0xffffffff
Also update the bam_cmd_element structure documentation to reflect the
dual purpose of the mask field across BAM versions.
This ensures correct behavior on BAM v1.6.0+ while maintaining backward
compatibility with older hardware.
Fixes: dfebb055f7 ("dmaengine: qcom: bam_dma: wrapper functions for command descriptor")
Tested-by: Lakshmi Sowjanya D <lakshmi.d@oss.qualcomm.com>
Signed-off-by: Md Sadre Alam <md.alam@oss.qualcomm.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
Link: https://patch.msgid.link/20260615060908.1263171-1-varadarajan.narayanan@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The failed_dev_add and failed_dev_name paths drop the file-device
reference while wq->wq_lock is still held. If put_device(fdev) drops the
last reference, idxd_file_dev_release() runs synchronously and tries to
take wq->wq_lock again, deadlocking.
Those paths also fall through into the later ctx cleanup labels even
though idxd_file_dev_release() owns that cleanup and frees ctx. This can
make idxd_xa_pasid_remove(ctx) and kfree(ctx) operate on a freed context.
Move idxd_wq_get() before file-device setup can fail, since the release
callback always calls idxd_wq_put(). Then unlock wq->wq_lock before
put_device(fdev) and return directly from the file-device setup failure
path, leaving ctx cleanup to the release callback.
Fixes: e6fd6d7e5f ("dmaengine: idxd: add a device to represent the file opened")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Link: https://patch.msgid.link/20260525141550.1385581-1-dbgh9129@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The release callbacks for wq, engine, and group devices
(idxd_conf_wq_release, idxd_conf_engine_release,
idxd_conf_group_release) each call kfree() on the enclosing struct.
The setup error paths and cleanup functions also call kfree()
explicitly after put_device(), producing a double free whenever
put_device() drops the reference count to zero and fires the release.
In the setup functions, device_initialize() is called before
device_add(), so the reference count is exactly 1 at the error sites.
put_device() unconditionally fires the release, which frees the struct;
the subsequent explicit kfree() then operates on freed memory.
For idxd_setup_wqs(), the wq release callback also owns opcap_bmap
and wqcfg. The error unwind additionally freed those fields explicitly
before calling put_device(), causing further double frees on both.
Remove the redundant explicit kfree() calls from all setup error paths
and cleanup functions for wq, engine, and group structs, delegating
sole ownership of those allocations to the release callbacks.
Fixes: 7c5dd23e57 ("dmaengine: idxd: fix wq conf_dev 'struct device' lifetime")
Fixes: 75b9113090 ("dmaengine: idxd: fix engine conf_dev lifetime")
Fixes: defe49f960 ("dmaengine: idxd: fix group conf_dev lifetime")
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260415205452.67155-1-dbgh9129@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When terminating DMA transfers, active descriptors are not properly
reclaimed. Only cyclic descriptors were handled, leaving non-cyclic
descriptors and their LLI chains to be permanently leaked.
Fix by using vchan_terminate_vdesc() which handles both cyclic and
non-cyclic descriptors by adding them to desc_terminated queue for
proper cleanup.
Add pchan->desc != pchan->done check to prevent double-adding completed
descriptors, which would corrupt the list.
Fixes: 5558593087 ("dmaengine: sun6i: Add driver for the Allwinner A31 DMA controller")
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Suggested-by: Frank Li <Frank.li@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260701045733.33654-1-zenghongling@kylinos.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
GPIO interrupts that are wakeup capable need to be forwarded to wakeup
capable parent irqchip. This is done via writing to it's wakeup_enable bit.
Currently the bit is set only for PDC irqchip by checking skip_wake_irqs.
skip_wake_irqs is set to differentiate between parent irqchips MPM and
PDC. It is set when the parent irqchip is PDC to inform pinctrl about
skipping the IRQ setting up at TLMM.
However, the functionality to forward GPIO interrupts during SoC low
power mode is needed regardless of which parent irqchip it is.
Without the functionality it is impossible for MPM irqchip to detect the
GPIO interrupt during SoC low power mode since for MPM irqchip the
skip_wake_irqs is always false.
Remove skip_wake_irqs condition when setting wakeup enable bit to allow
forwarding GPIO interrupts for SoCs using MPM irqchip too.
Fixes: 76b446f5b8 ("pinctrl: qcom: handle intr_target_reg wakeup_present/enable bits")
Signed-off-by: Sneh Mankad <sneh.mankad@oss.qualcomm.com>
Reviewed-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260616-enable_wakeup_capable_gpios-v3-1-fb59647d89cb@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
FIELD_GET(SE_THRESH_MASK, thresh) extracts bits [31:23] from thresh and
right-shifts them, which is the inverse of the intended operation. Since
thresh is derived from se_buf_len / 2 (at most 255), bits [31:23] are
always zero, so the SE threshold is never actually programmed into the
register.
Use FIELD_PREP() instead to correctly left-shift thresh into bits [31:23]
of the valid_en_se register, consistent with the FIELD_PREP usage for
the perf tuner config just above.
Fixes: 30eba9df76 ("dmaengine: switchtec-dma: Implement hardware initialization and cleanup")
Signed-off-by: David Carlier <devnexen@gmail.com>
Review-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260317083252.13224-1-devnexen@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2026-06-30 16:52:11 +05:30
530 changed files with 6991 additions and 2962 deletions
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
