PIPEDSL is reading as 0 when in SRDENT(PSR1) or DEEP_SLEEP(PSR2). On
wake-up scanline counting starts from vblank_start - 1. We don't know if
wake-up is already ongoing when evasion starts. In worst case PIPEDSL could
start reading valid value right after checking the scanline. In this
scenario we wouldn't have enough time to write all registers. To tackle
this evade scanline 0 as well. As a drawback we have 1 frame delay in flip
when waking up.
v2:
- use intel_dsb_emit_wait_dsl
- add evasion of scanline 0 also for Panel Replay
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213064804.2077127-11-jouni.hogander@intel.com
We have different approach on how flip is considered being complete. We are
waiting for vblank on DSB and generate interrupt when it happens and this
interrupt is considered as indication of completion -> we definitely do not
want to skip vblank wait.
Also not skipping scanline wait shouldn't cause any problems if we are in
DEEP_SLEEP PIPEDSL register is returning 0 -> evasion does nothing and if
we are not in DEEP_SLEEP evasion works same way as without PSR.
v2: add comment explaining why we are not setting DSB_SKIP_WAITS_EN
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213064804.2077127-10-jouni.hogander@intel.com
In LunarLake we have SFF_CTL register which contains SFF bit ored with
respective SFF bit in PSR2_MAN_TRK_CTL register. Use this register instead
of the bit in PSR2_MAN_TRK_CTL on frontbuffer tracking callbacks. This
helps us avoiding taking psr mutex when performing atomic commit.
We don't need to set the CFF bit as selective update configuration in
PSR2_MAN_TRL_CTL is not overwritten anymore. I.e. we have valid
configuration in PSR2_MAN_TRK_CTL and in plane SEL_FETCH_* registers when
SFF bit gets cleared by the HW in case something triggers "frame change"
event after SFF bit is cleared.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213064804.2077127-6-jouni.hogander@intel.com
We are preparing for a change where only frontbuffer flush will use
single full frame bit of a new register (SFF_CTL) available on LunarLake
onwards.
It shouldn't be necessary to have SFF bit set if CFF bit is set in
PSR2_MAN_TRK_CTL -> removing setting it on all platforms as there is not
reason to have it different on older platforms.
v2: commit message improved
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213064804.2077127-2-jouni.hogander@intel.com
Since we don't do mailbox updates the push send bit
should alwyas clear by the time the delay vblank fires
and the flip completes. Check for that to make sure we
haven't screwed up the sequencing/vblank evasion/etc.
On the DSB path we should be able to guarantee this
since we don't have to deal with any scheduler latencies
and whatnot. I suppose unexpected DMA/memory latencies
might be the only thing that might trip us up here.
For the MMIO path we do always have a non-zero chance
that vblank evasion fails (since we can't really guarantee
anything about the scheduling behaviour). That could trip
up this check, but that seems fine since we already print
errors for other types of vblank evasion failures.
Should the CPU vblank evasion actually fail, then the push
send bit can still be set when the next commit happens. But
both the DSB and MMIO paths should handle that situation
gracefully.
v2: Only check once instead of polling for two scanlines
since we should now be guaranteed to be past the
delayed vblank.
Also check in the MMIO path for good measure
v3: Skip the push send check when VRR is disabled.
With joiner the secondary pipe's DSBs doen't have access
to the transcoder registers, and so doing this check
there triggers a reponse timeout error on the DSB. VRR
is not currently allowed when using joiner, so this will
prevent the bogus register access.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250210160711.24010-1-ville.syrjala@linux.intel.com
Currently we trigger the push send first, then follow it with
a "wait for safe window". That approach no longer works on
PTL+ because triggering the push send immediately ends the safe
window. On prior hardware the safe window extended past the
push being sent (presumably all the way to the pipe's delayed
vblank).
In order to deal with the new hardware behaviour we must reverse
the order of these two operations: first wait for safe window,
then trigger the push.
The only slight danger with this approach is that if we mess up
the vblank evasion around the vmax decision boundary the push
might get postponed until after the next frame's vactive. But
assuming we don't mess up the vblank evasion this approach is
completely safe.
As a slight bonus we can perform the push after we've done the
LUT writes as well, meaning we no longer have to worry about
extending the vblank delay to provide enough time for LUT
programming. Instead we will now depend on the vblank evasion
at vmax decision boundary to guarantee this.
However vblank delay (or framestart delay) is still the only
way to provide extra time for the LUT programming in the
non-VRR use cases. Let's assume we don't need anything extra
for now, but eventually we should come up with some proper
estimates on how long the LUT programming can take and
configure the vblank delay accordingly for the non-VRR use
cases.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250207223159.14132-7-ville.syrjala@linux.intel.com
Skip all the commit completion interrupt stuff on the
chained DSB when we don't take the full DSB path (ie. when
the plane/pipe programming is done via MMIO). The commit
completion will be done via the CPU side vblank interrupt.
Currently this is just a redundant interrupt, so not a big
deal. But in the future we'll be moving the TRANS_PUSH write
into the chained DSB as well, and that we definitely don't
want to do when it's also being done by the CPU from
intel_pipe_update_end().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250207223159.14132-5-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
When we send a push during vblank the TRANS_PUSH write happens
at some point during a scanline, and the hardware picks it up
on the next scanline. Thus there is up to one extra scanline
of delay between the TRANS_PUSH write and the delayed vblank
triggering. Account for that during intel_dsb_wait_vblank_delay()
so that we are guaranteed to be past the delayed vblank before
we trigger the completion interrupt for the commit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250207223159.14132-4-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
We don't really want legacy cursor updates to trigger
VRR pushes because these can happen willy nilly and we
generally want more precise control over the pushes.
The fastpath in intel_legacy_cursor_update() doesn't
send pushes, but if we punt to the full commit path
(with the flip completion short circuited) we are currently
sending pushes. Skip those as well so that they don't
interfere with the push handling from normal commits.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250207223159.14132-3-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
The "wait usec" DSB command doesn't quite seem to able to
guarantee that it always waits at least the specified
amount of usecs. Some of that could be just because it
supposedly just does some kind of dumb timestamp comparison
internally. But I also see cases where two hardware timestamps
sampled on each side of the "wait usec" command come out one
less than expected. So it looks like we always need at least a
+1 to guarantee that we never wait less than specified. Always
apply that adjustment in dsb_wait_usec().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250207223159.14132-2-ville.syrjala@linux.intel.com
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Use intel_display as an argument for intel_shared_dpll_init() and
replace drm_i915_private in function wherever possible.
While at it prefer using display->platform.xx over IS_PLATFORM.
Initialize dpio_phy and dpio_channel since with IS_GEMINILAKE()
and IS_BROXTON() compiler knows it will return false for xe but
since display->platform.xx is a runtime check which means the
compiler sees a potential path where uninitialized variables
could be accessed and raises a warning.
--v2
-Amend commit message to explain why some variables were
initialized [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212074542.3569452-8-suraj.kandpal@intel.com
