More attention for the rk3128 soc (dsi, i2c, spdif, sfc), hdmi-sound
for a rk3066a board and some minor cleanups.
* tag 'v6.11-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: add #sound-dai-cells to hdmi node on rk3128
ARM: dts: rockchip: add #sound-dai-cells to hdmi node no rk3036
ARM: dts: rockchip: enable hdmi_sound and i2s0 for mk808 hdmi
ARM: dts: rockchip: Add SFC for RK3128
ARM: dts: rockchip: add hdmi-sound node to rk3066a
ARM: dts: rockchip: Add spdif node for RK3128
ARM: dts: rockchip: Add i2s nodes for RK3128
ARM: dts: rockchip: Add DSI for RK3128
ARM: dts: rockchip: Add D-PHY for RK3128
dt-bindings: clock: rk3128: Add PCLK_MIPIPHY
Link: https://lore.kernel.org/r/2187283.irdbgypaU6@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New boards, the Radxa ROCK S0, Radxa ZERO 3W/3E, CM3588 NAS solution
and Neardi LBA3368.
Interesting core changes: dropping of the rk3399pro dtsi - Dragan dug
through available information, boards and found out that the pcie-stuff
described in the existing rk3399pro dtsi is actually not true and the
file can go away.
And also a bit of reorganizing of rk3588 dtsi files. There are number
of rk3588 variants in existence that select between two sets of
peripherals and also multiple sets of operating points. So the change
sorts it differently so that we stop including one soc-variant into
others and also make room for the operating points.
The rk3308 got io domains, a number of additions to the rk3308-rock-pi-s
board (wifi, io-domains, otp, ethernet, uart, sdmmc).
And then there are of course the usual set of new additions like
rk3588 pcie endpoint support and individual peripherals for boards.
* tag 'v6.11-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (42 commits)
arm64: dts: rockchip: Delete the SoC variant dtsi for RK3399Pro
arm64: dts: rockchip: Fix mic-in-differential usage on rk3568-evb1-v10
arm64: dts: rockchip: Fix mic-in-differential usage on rk3566-roc-pc
arm64: dts: rockchip: Drop invalid mic-in-differential on rk3568-rock-3a
arm64: dts: rockchip: Add rock5b overlays for PCIe endpoint mode
arm64: dts: rockchip: Add PCIe endpoint mode support
arm64: dts: rockchip: Increase VOP clk rate on RK3328
arm64: dts: rockchip: add gpio-line-names to radxa-zero-3
arm64: dts: rockchip: Split GPU OPPs of RK3588 and RK3588j
arm64: dts: rockchip: Add OPP data for CPU cores on RK3588j
arm64: dts: rockchip: Add OPP data for CPU cores on RK3588
arm64: dts: rockchip: Add CPU/memory regulator coupling for 2 RK3588 boards
arm64: dts: rockchip: fix mmc aliases for Radxa ZERO 3E/3W
arm64: dts: rockchip: Add Neardi LBA3368 board
dt-bindings: arm: rockchip: Add Neardi LBA3368
dt-bindings: vendor-prefixes: Add Neardi Technology
arm64: dts: rockchip: Enable PinePhone Pro vibrator
arm64: dts: rockchip: Enable PinePhone Pro IMU sensor
arm64: dts: rockchip: Add Pinephone Pro support for GPIO LEDs
arm64: dts: rockchip: Enable SPI flash on PinePhone Pro
...
Link: https://lore.kernel.org/r/4901395.GXAFRqVoOG@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
MediaTek ARM64 DTS updates for v6.11
This introduces the new Airoha (MediaTek) EN7581 home networking
platform (routers) in early stages, but with support for its
Evaluation Board, a few more MediaTek based machines, and
improvements for existing ones.
For the MT7981 router SoC we get pinctrl support, along with the
enablement of its watchdog, eFuse/nvmem, I2C and integrated WiFi
controller, other than the introduction of new machines based on
this chip: the Cudy WR3000 V1 router and the OpenWRT One.
MT7986 gets a new machine: the BananaPi R3 Mini.
Some advancements have been done also on the MT7988 SoC, which
gains support for its I2C, PWM and USB XHCI controllers.
MediaTek Genio SoCs also get attention, with the introduction of a
basic device tree for the MT8390 Genio 700-EVK board, and for the
MT8395 Genio 1200 powered Kontron 3.5"-SBC-i1200.
Additionally, the Genio 1200 Radxa NIO12L board gets support for
USB Role Switching and proper PCI-Express controller PM suspend
and resume, other than finally enabling CPU and GPU frequency
and voltage scaling for improved efficiency.
Speaking of MediaTek Kompanio SoCs (Chromebooks) instead, thanks
to community interest and help in testing, there comes support for
the MT8195-powered HP Chromebook X360 13b-ca0002sa, while Google
contributed support for the MT8186-powered Acer Chromebook 311.
Moreover, MT8188 gets support for its integrated power domains,
other than its Global Command Engine (GCE) mailboxes, initial
basic support for the VDO0/1 blocks for multimedia, and its GPU
(ARM Mali G57-MC3, Valhall-JM) with Panfrost.
Besides that, this also adds a few other cleanups and improvements
for all machines using the MT8183, MT8192, MT8195/MT8395 SoCs and
adds generation of symbols on base devicetrees of machines using
Device Tree Overlay(s) (DTBO).
In particular:
- The MediaTek Smart Voltage Scaling (SVS) is now fully working
those SoCs, bringing further power efficiency improvements;
- Thermal zones were refactored on MT8183 for consistency with
the other MediaTek SoCs and for readability
- Sound DAI links are now consistently specified in device tree
on MT8195 and MT8186 machines
- Newly supported machines/boards
- EN7581: EVK
- MT7981: Cudy WR3000 V1, OpenWRT One
- MT7986: BananaPi R3 Mini
- MT8186: Acer Chromebook 311 (Corsola Voltorb)
- MT8195: HP Chromebook X360 13b-ca0002sa (Cherry Dojo)
- MT8390/8188: Genio 700 EVK
- Some cleanups for unused/legacy devicetree properties
* tag 'mtk-dts64-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (58 commits)
arm64: dts: mediatek: Declare drive-strength numerically
arm64: dts: mt7622: fix switch probe on bananapi-r64
arm64: dts: mediatek: Add MT8186 Voltorb Chromebooks
dt-bindings: arm: mediatek: Add MT8186 Voltorb Chromebooks
arm64: dts: mediatek: Makefile: Generate symbols for DTBO support
arm64: dts: mediatek: mt8183-kukui-jacuzzi: Add ports node for anx7625
arm64: dts: mediatek: mt8183-pico6: Fix wake-on-X event node names
arm64: dts: mt8173: Add G2Touch touchscreen node
arm64: dts: mediatek: mt8183-kukui: Fix the value of `dlg,jack-det-rate` mismatch
arm64: dts: mediatek: mt8188: Add support for Mali GPU on Panfrost
arm64: dts: mediatek: mt8188: Add support for SoC power domains
arm64: dts: mediatek: mt8188: Add VDOSYS0/1 support for multimedia
arm64: dts: mediatek: mt8188: Add Global Command Engine mailboxes
arm64: dts: mediatek: mt8173-elm: drop PMIC's syscon node
arm64: dts: mediatek: mt8365: use a specific SCPSYS compatible
arm64: dts: mediatek: mt8365: drop incorrect power-domain-cells
arm64: dts: mediatek: mt7981: add I2C controller
arm64: dts: mediatek: mt7622: fix "emmc" pinctrl mux
arm64: dts: mediatek: mt7988: add I2C controllers
arm64: dts: mediatek: mt7988: add PWM controller
...
Link: https://lore.kernel.org/r/20240628093801.126013-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The commit 587b4ee24f ("arm64: dts: rockchip: add core dtsi file for
RK3399Pro SoCs") describes the RK3399Pro's PCI Express interface as the way
built-in NPU communicates with the rest of the SoC. All available evidence
shows this not to be accurate, as described in detail below. Moreover, the
rk3399pro.dtsi isn't used anywhere, so let's delete it.
The publicly available schematics of the Radxa Rock Pi N10 carrier board [1]
and the Vamrs VMARC RK3399Pro SoM, [2] which put together form the currently
single supported RK3399Pro-based board, clearly show that the PCI Express x4
interface of this SoC is fully functional and actually not used by the SoC
to communicate with the built-in NPU. In more detail, the VMARC SoM exports
the SoC's PCI Express interface at its board-to-board connector, and the Rock
Pi N10 routes it to an M.2 M-key slot with four PCI Express lanes.
Both the Rockchip RK3399Pro datasheet, version 1.1, [3] and the Rockchip
RK3399Pro technical reference manual (TRM), first part of the version 1.0, [4]
don't describe that the SoC's PCI Express interface is reserved for the NPU.
Instead, the RK3399Pro TRM describes that the NPU uses AHB and AXI interfaces
as the host interface (HIF). The RK3399Pro datasheet clearly describes that
the PCI Express x4 interface is available for general-purpose use, just like
it's the case with the standard Rockchip RK3399 SoC, [5] albeit with a bit
shorter feature list provided in the RK3399Pro datasheet.
Even the publicly available reference RK3399Pro schematic from Rockchip [6]
shows the availability of a standard PCI Express slot with four lanes, which
would be pretty much impossible if the PCI Express interface was reserved
for the communication with the built-in NPU.
Based on the RK3399Pro datasheet [3] and the board schematics, [2][6] the
built-in NPU actually exports NPU_PCIE as a separate PCI Express x2 interface
that's partially pinmuxed with the NPU's separate USB 3.0 interface, which is
described further in the next paragraph. However, the NPU's separate PCI
Express x2 interface is left undocumented in the publicly available RK3399Pro
documentation, in which it's clearly described as reserved for internal use
and not intended for the communication with the NPU. Finally, the evidently
independent nature of the separate NPU_PCIE x2 interface makes ignoring it
safe when it comes to determining the nature and the availability of the
RK3399Pro's main PCI Express x4 interface.
The actual application-level communication with the built-in NPU, including
powering it up and down and uploading the NPU firmware, is performed through
the separate USB 2.0 and USB 3.0 interfaces exported by the NPU, [7] which
the VMARC SoM [2] and the reference board design from Rockchip [6] route to
the SoC's standard USB 2.0 and USB 3.0 interfaces, to make the NPU accessible
to software running on the SoC's ARM cores.
[1] https://dl.radxa.com/rockpin10/docs/hw/rockpi_n10_sch_v1.1_20190909.pdf
[2] https://dl.radxa.com/rockpin10/docs/hw/VMARC_RK3399Pro_sch_V1.1_20190619.pdf
[3] https://www.rockchip.fr/RK3399Pro%20datasheet%20V1.1.pdf
[4] https://www.rockchip.fr/Rockchip%20RK3399Pro%20TRM%20V1.0%20Part1.pdf
[5] https://www.rockchip.fr/RK3399%20datasheet%20V1.8.pdf
[6] https://opensource.rock-chips.com/images/e/e4/RK_EVB_RK3399PRO_LP3S178P332SD8_V11_20181113_RZF.pdf
[7] https://wiki.radxa.com/RockpiN10/dev/NPU-booting
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/4449f7d4eead787308300e2d1d37b88c9d1446b2.1717308862.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The 'mic-in-differential' DT property supported by the RK809/RK817 audio
codec driver is actually valid if prefixed with 'rockchip,':
DTC_CHK arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dtb
rk3568-rock-3a.dtb: pmic@20: codec: 'mic-in-differential' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/mfd/rockchip,rk809.yaml#
However, the board doesn't make use of differential signaling, hence
drop the incorrect property and the now unnecessary 'codec' node.
Fixes: 22a442e658 ("arm64: dts: rockchip: add basic dts for the radxa rock3 model a")
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20240622-rk809-fixes-v2-3-c0db420d3639@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add rock5b overlays for PCIe endpoint mode support.
If using the rock5b as an endpoint against a normal PC, only the
rk3588-rock-5b-pcie-ep.dtbo needs to be applied.
If using two rock5b:s, with one board as EP and the other board as RC,
rk3588-rock-5b-pcie-ep.dtbo and rk3588-rock-5b-pcie-srns.dtbo has to
be applied to the respective boards.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20240607-rockchip-pcie-ep-v1-v5-13-0a042d6b0049@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add a 'thermal-zones' node for stih418.
A thermal-zone needs three components:
- thermal sensors, described in an earlier commit[1]
- cooling devices, specified for each CPU
- a thermal zone, describing the overall behavior.
The thermal zone needs references to both CPUs and thermal sensors,
which phandle are also added. The thermal management will then be
achieved on CPUs using the cpufreq framework.
[1] https://lore.kernel.org/lkml/20240320-thermal-v3-2-700296694c4a@gmail.com/
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
arm64: Xilinx DT changes for 6.11
- Add remoteproc TCM support
- Add coresight cpu debug support
- Describe OCM controller
- Disable Tri-state for SDIO on kv260
- Add compatibility strings for kv260 overlays
- Add support for k26-rev2 SOM
- Describe ina260/DP/TTC and PWM on kv260
DT schema alignments and fixes
- Align soc-nvmem binding with dt-schema
- Fix fpga region node
- Add description for efuses
- Describe USB wakeup interrupt
- Fix ams-pl node
* tag 'zynqmp-soc-for-6.11' of https://github.com/Xilinx/linux-xlnx:
arm64: zynqmp: Add pwm-fan node and fix ttc0 pwm-cells property
arm64: zynqmp: Add support for K26 rev2 boards
arm64: zynqmp: Describe DisplayPort connector for Kria
arm64: zynqmp: Add description for ina260 on kv260
arm64: zynqmp: Add compatible string for kv260
arm64: zynqmp: Disable Tri-state for SDIO
arm64: zynqmp: Remove address/size-cells from ams node
arm64: zynqmp: Describe OCM controller
arm64: zynqmp: Describe USB wakeup interrupt
arm64: zynqmp: Add missing description for efuses
arm64: zynqmp: Use fpga-region as node name
arm64: zynqmp: Align nvmem node with dt schema
arm64: zynqmp: Add coresight cpu debug support
dts: zynqmp: add properties for TCM in remoteproc
Link: https://lore.kernel.org/r/CAHTX3dLbNAYL4hm+bs=GByA4DqjRr3Rt6WESram8VyU1By8Mow@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arm Juno updates for v6.11
Addition of dedicated FPGA syscon compatible for Juno platforms. Also
enablement of GPU device node now that the panfrost driver is already
enabled as a module in defconfig.
* tag 'juno-updates-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Enable GPU
arm64: dts: juno: add dedicated FPGA syscon compatible
dt-bindings: arm: arm,juno-fpga-apb-regs: document FPGA syscon
Link: https://lore.kernel.org/r/20240620093924.375244-2-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Renesas DTS updates for v6.11
- Add support for the second and third Ethernet interfaces on the
White Hawk development board,
- Add support for the second Ethernet interface on the RZ/N1 SoC,
- Add I2C EEPROM support for the Condor-I development board,
- Add video capture support for the R-Car V4M SoC,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: r8a779h0: Add video capture nodes
arm64: dts: renesas: r9a08g045: Update fallback string for SDHI nodes
arm64: dts: renesas: rzg2l: Update fallback string for SDHI nodes
arm64: dts: renesas: r9a09g011: Update fallback string for SDHI nodes
arm64: dts: renesas: s4sk: Add aliases for I2C buses
arm64: dts: renesas: spider-cpu: Add aliases for I2C buses
arm64: dts: renesas: white-hawk-cpu: Add aliases for I2C buses
arm64: dts: renesas: condor-i: Add I2C EEPROM
arm64: dts: renesas: gray-hawk-single: Add aliases for I2C buses
ARM: dts: renesas: r9a06g032: Describe GMAC1
arm64: dts: renesas: white-hawk: ethernet: Describe AVB1 and AVB2
arm64: dts: renesas: r8a779g0: Use MDIO node for all AVB devices
Link: https://lore.kernel.org/r/cover.1718355312.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On some devicetrees, the drive-strength property gets assigned a
MTK_DRIVE_(x)_mA definition, which matches with (x).
For example, MTK_DRIVE_8mA equals to 8 and MTK_DRIVE_30mA equals
to 30.
Also keeping in mind that the drive-strength property is, by
(binding) definition, taking a number in milliamperes unit,
change all devicetrees to avoid the usage of any MTK_DRIVE_(x)
definition.
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240620101656.1096374-2-angelogioacchino.delregno@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add device trees for the MT8186 based Voltorb Chromebooks, also known
as the Acer Chromebook 311 (C723/C723T). The devices are clamshell
style laptops with an optional touchscreen.
The devices differ from the other existing MT8186 Chromebooks in that
it uses a higher speced / binned SoC which also requires a separate
PMIC for the big core cluster. Also, a different codec is used for
the internal speakers.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20240620094746.2404753-4-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The wake-on-bt and wake-on-wlan nodes don't have a button- or event-
prefix that the gpio-keys binding requires.
Fix up the node names to satisfy the binding. While at it, also fix up
the GPIO overriding structure for the wake-on-wlan node. Instead of
referencing the gpio-keys node and then open coding the node, add a
label for the event node, and use that to reference and override the
GPIO settings.
Fixes: 055ef10ccd ("arm64: dts: mt8183: Add jacuzzi pico/pico6 board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240131084043.3970576-1-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
