i.MX arm64 device tree chanage for 6.6:
- New board device trees: i.MX93 based MBa93xxLA SBC, DEBIX SOM A,
Gateworks i.MX8MM and i.MX8MP Venice boards.
- Add HDMI audio and video support for i.MX8MM/N Beacon board.
- Add coresight trace support for i.MX8MQ SoC.
- Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties.
- Add sound card support for verdin-imx8mp devices.
- A couple of change from Frank Li to add CPU frequency table and
thermal support for i.MX8QM SoC.
- Add L1 and L2 cache info for LS1028A SoC.
- A series of i.MX93 changes from Peng Fan t oadd thermal and CM33 core
support.
- A few imx8mq-librem5 updates from Martin Kepplinger and
Sebastian Krzyszkowiak.
- A series of imx8mp-phycore-som changes from Teresa Remmet to update
regulators.
- A bunch of changes from Tim Harvey to update various Gateworks boards.
- A bunch of dtschema warning fixes from Fabio Estevam, Krzysztof
Kozlowski, etc.
- Other small and random changes.
* tag 'imx-dt64-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (88 commits)
arm64: dts: imx8mq-librem5-devkit: Drop power-supply
arm64: dts: imx8mq-librem5-devkit: Mark buck2 as always on
arm64: dts: imx8mm-beacon-baseboard: Remove usbotg2 pinctrl-names
arm64: dts: imx8mm-emcon: Remove iomuxc pinctrl-names
arm64: dts: imx8m-beacon-kit: Remove extra sound-sai entry
arm64: dts: freescale: Add DEBIX SOM A and SOM A I/O Board support
arm64: dts: imx8mp-debix: remove unused fec pinctrl node
arm64: dts: imx8mp-debix-model-a: Remove invalid rtc property
arm64: dts: imx8mp-msc-sm2s-ep1: Remove invalid sgtl5000 property
arm64: dts: imx8m-venice: Pass "brcm,bcm4329-fmac"
arm64: dts: imx8mp-evk: Add HDMI support
arm64: dts: freescale: verdin-imx8mp: dev: add sound card
arm64: dts: freescale: verdin-imx8mp: dahlia: add sound card
arm64: dts: imx8mm-emcon: Fix the regulator names
arm64: dts: imx: Pass a single BD71847 clock entry
arm64: dts: ls1028a: add l1 and l2 cache info
arm64: dts: imx8mm-phyboard-polis-rdk: Remove 'fsl,spi-num-chipselects'
arm64: dts: imx8dxl-evk: Remove 'fsl,spi-num-chipselects'
arm64: dts: freescale: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties
arm64: dts: tqma8mqnl: Add vcc supply to i2c eeproms
...
Link: https://lore.kernel.org/r/20230813133354.847010-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
RISC-V Devicetrees for v6.6
StarFive:
There's only StarFive stuff this time around, starting with some
bindings to get clock ID defines out of the binding headers. Getting
these (and the syscon bindings) in unblocked a swathe of stuff sitting
on the list. Added are: new clock controllers and sycons, ethernet
support, thermal sensors, USB and PCIe PHYs, hwrng, mmc and a few more
besides for the VisionFive v2. The original VisionFive and BeagleV
Starlight got some the thermal sensor support too, as that is supported
by the same driver. These changes make the board actually usable with
something other than an initramfs.
Overlay support by way of the -@ flag set during dtb building, is added
also.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: (26 commits)
riscv: dts: starfive: jh7110: Fix GMAC configuration
riscv: dts: starfive - Add hwrng node for JH7110 SoC
riscv: dts: starfive - Add crypto and DMA node for JH7110
riscv: dts: starfive: Add mmc nodes on VisionFive 2 board
riscv: dts: starfive: enable DCDC1&ALDO4 node in axp15060
riscv: dts: starfive: Add QSPI controller node for StarFive JH7110 SoC
riscv: dts: starfive: jh7110: add the node and pins configuration for tdm
riscv: dts: starfive: jh7110: add dma controller node
riscv: dts: starfive: Add spi node and pins configuration
riscv: dts: starfive: Add USB dts node for JH7110
riscv: dts: starfive: Add USB and PCIe PHY nodes for JH7110
riscv: dts: starfive: jh7110: Add temperature sensor node and thermal-zones
riscv: dts: starfive: jh7100: Add temperature sensor node and thermal-zones
riscv: dts: starfive: visionfive 2: Add configuration of gmac and phy
riscv: dts: starfive: jh7110: Add ethernet device nodes
riscv: dts: starfive: jh7110: Add PLL clocks source in SYSCRG node
riscv: dts: starfive: jh7110: Add syscon nodes
riscv: dts: starfive: jh7110: Add STGCRG/ISPCRG/VOUTCRG nodes
riscv: dts: starfive: jh7110: Add DVP and HDMI TX pixel external clocks
dt-bindings: clock: Add StarFive JH7110 Video-Output clock and reset generator
...
Link: https://lore.kernel.org/r/20230813-naturist-fragment-ac7d10c453ba@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
mvebu dt64 for 6.6 (part 1)
Add the NAND Flash Controller on the AC5/AC5X SOC device tree
Fix style issue
* tag 'mvebu-dt64-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: Add NAND flash controller to AC5
arm64: dts: marvell: add missing space before {
Link: https://lore.kernel.org/r/87edk8t0kl.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Allwinner D1, T113 provide two CAN controllers that are variants
of the R40 controller.
I have tested support for these controllers on two boards:
- A Lichee Panel RV 86 Panel running a D1 chip
- A Mango Pi MQ Dual running a T113-s3 chip
Both of these fully support both CAN controllers.
Signed-off-by: John Watts <contact@jookia.org>
Link: https://lore.kernel.org/r/20230807191952.2019208-1-contact@jookia.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Fixed regulators are not in some bus and bindings do not allow a "reg"
property. Move them out of "regulators" node to top-level.
dove-cubox.dtb: regulator@1: Unevaluated properties are not allowed ('reg' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Fixed regulators are not in some bus and bindings do not allow a "reg"
property. Move them out of "regulators" node to top-level.
armada-370-dlink-dns327l.dtb: regulator@1: Unevaluated properties are not allowed ('reg' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
"make dtbs_check":
arch/arm/boot/dts/nuvoton-npcm730-gbs.dtb: i2c-switch@71: $nodename:0: 'i2c-switch@71' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
...
Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
"make dtbs_check":
arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dtb: i2c-switch@70: $nodename:0: 'i2c-switch@70' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arm/boot/dts/aspeed-bmc-bytedance-g220a.dtb: i2c-switch@70: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c@0', 'i2c@1', 'i2c@2', 'i2c@3' were unexpected)
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
...
Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
File names inside the file does not add much and just makes it
difficult to move the files, often the file name is not updated
and becomes wrong. Remove them.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This looks better and allows us to see the row and column numbers
more easily. Switch to this macro here.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This node does not follow the DT binding schema, correct this.
The arm,pl011 binding requires the first clock to be named "uartclk".
Should result in no functional change.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This node does not follow the DT binding schema, correct this.
All "regulator-fixed" are voltage type, so drop "regulator-type".
Should result in no functional change.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This node does not follow the DT binding schema, correct this.
Should result in no functional change.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This node does not follow the DT binding schema, correct this.
Should result in no functional change.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM changes for v6.6
1. Galaxy S II: correct LCD screen's physical size.
2. Add Samsung Galaxy Tab 3 8.0 boards (Exynos4212).
3. Galaxy S3 family: add USB connector and USB OTG. Full USB OTG still
seems not to work, but at least HDMI improved and dtbs_check is
happy.
4. Fix issues pointed out by dtbs_check and W=1: unit addresses, use
'gpios' suffix over 'gpio', update i2c-arb device node to newer
binding.
5. Few white-space cleanups.
* tag 'samsung-dt-6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: samsung: exynos4412-midas: add USB connector and USB OTG
ARM: dts: samsung: exynos5250-snow: switch i2c-arb to new child variant
ARM: dts: samsung: exynos5250-snow: use 'gpios' suffix for i2c-arb
ARM: dts: samsung: fix Exynos4212 Tab3 makefile entries
ARM: dts: exynos: Add Samsung Galaxy Tab 3 8.0 boards
ARM: dts: samsung: s5pv210-smdkv210: correct ethernet reg addresses (split)
ARM: dts: samsung: s3c6410-mini6410: correct ethernet reg addresses (split)
ARM: dts: samsung: exynos4210-i9100: Fix LCD screen's physical size
ARM: dts: s5pv210: minor whitespace cleanup around '='
ARM: dts: exynos: minor whitespace cleanup around '='
Link: https://lore.kernel.org/r/20230810151250.220202-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Devicetree changes for omaps for v6.6
Updates for opp and pinctrl nodes to follow the devicetree bindings.
* tag 'omap-for-v6.6/dt-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
arm: dts: ti: omap: Fix OPP table node names
arm: dts: ti: omap: am5729-beagleboneai: Drop the OPP
arm: dts: ti: omap: omap36xx: Rename opp_supply nodename
ARM: dts: ti: add missing space before {
ARM: dts: ti: split interrupts per cells
ARM: dts: Unify pinctrl-single pin group nodes for davinci
Link: https://lore.kernel.org/r/pull-1691658952-110529@atomide.com-3
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Devicetree binding changes for omaps for v6.6
Just one change to get started on SoC yaml binding changes for omaps.
* tag 'omap-for-v6.6/dt-bindings-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
dt-bindings: omap: Partially convert omap.txt to yaml
Link: https://lore.kernel.org/r/pull-1691658952-110529@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add D1 GPADC node
- Introduce support for OrangePi Zero 3 SBC
- Enable DT overlay support for Allwinner H3 boards
* tag 'sunxi-dt-for-6.6-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm: dts: Enable device-tree overlay support for sun8i-h3 pi devices
arm64: dts: allwinner: h616: Add OrangePi Zero 3 board support
dt-bindings: arm: sunxi: document Orange Pi Zero 3 board name
arm64: dts: allwinner: h616: Split Orange Pi Zero 2 DT
riscv: dts: allwinner: d1: Add GPADC node
Link: https://lore.kernel.org/r/20230806180546.GA127039@jernej-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Armv8 Juno/FVP update for v6.6
Just a single minor whitespace cleanup in couple of FVP device trees.
* tag 'juno-update-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: arm: minor whitespace cleanup around '='
Link: https://lore.kernel.org/r/20230804123223.3258086-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM64: DT: HiSilicon ARM64 DT updates for v6.6
- Miscellaneous fixes according the DTS coding style
- Correct the clocks order of the sd0 for the hi3798cv200
* tag 'hisi-arm64-dt-for-6.6' of https://github.com/hisilicon/linux-hisi:
arm64: dts: hi3798cv200: Fix clocks order of sd0
arm64: dts: hisilicon: add missing space before {
arm64: dts: hisilicon: minor whitespace cleanup around '='
Link: https://lore.kernel.org/r/64CC99A3.5030701@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Renesas DTS updates for v6.6
- Add Clocked Serial Interface (CSI) support for the RZ/V2M SoC,
- Add PMIC, RTC, and PWM support for the RZ/G2L, RZ/G2LC, and RZ/V2L
SMARC EVK development boards,
- Add PWM (MTU3a) support for the RZ/G2UL and RZ/Five SoCs,
- Add External interrupt (INTC-EX) support for the R-Car S4-8 SoC,
- Add LED support for the Spider development board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: spider-cpu: Add GP LEDs
arm64: dts: renesas: r8a779f0: Add INTC-EX node
arm64: dts: renesas: rzg2ul-smarc: Add support for enabling MTU3
arm64: dts: renesas: r9a07g043: Add MTU3a node
ARM dts: renesas: armadillo800eva: Switch to enable-gpios
arm64: dts: renesas: rzg2lc-smarc-som: Enable PMIC and built-in RTC
arm64: dts: renesas: rzg2lc-smarc-som: Add PHY interrupt support for ETH0
riscv: dts: renesas: Clean up dtbs_check W=1 warning due to empty phy node
arm64: dts: renesas: rzg2lc-smarc: Add support for enabling MTU3
arm64: dts: renesas: rzg2l-smarc: Add support for enabling MTU3
arm64: dts: renesas: Add missing space before {
ARM: dts: renesas: Add missing space before {
arm64: dts: renesas: Minor whitespace cleanup around '='
arm64: dts: renesas: rzg2l-smarc-som: Enable PMIC and built-in RTC
arm64: dts: renesas: r9a09g011: Add CSI nodes
arm64: dts: renesas: rzg2l: Fix txdv-skew-psec typos
arm64: dts: renesas: rzg2l: Update overfow/underflow IRQ names for MTU3 channels
Link: https://lore.kernel.org/r/cover.1690545144.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
arm64: tegra: Device tree changes for v6.6-rc1
The majority of this is fixes all over the place for DT schema
validation warnings. However, there are also cleanups for some things in
DT and audio support is added on IGX Orin. Jetson Orin NX and Nano also
gain a new thermal trip point to help keep the device cool at moderate
loads.
* tag 'tegra-for-6.6-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (22 commits)
arm64: tegra: Add blank lines for better readability
arm64: tegra: Remove {clock,reset}-names from VIC powergate
arm64: tegra: Drop incorrect maxim,disable-etr on Smaug
arm64: tegra: Add SPI device tree nodes for Tegra234
arm64: tegra: Enable UARTA and UARTE for Orin Nano
arm64: tegra: Add UARTE device tree node on Tegra234
arm64: tegra: Adapt to LP855X bindings changes
arm64: tegra: Add PCIe and DP 3.3V supplies
arm64: tegra: Add missing reset-names for Tegra HS UART
arm64: tegra: Remove current-speed for SBSA UART
arm64: tegra: smaug: Remove reg-shift for high-speed UART
arm64: tegra: Remove dmas and dma-names for debug UART
arm64: tegra: Add 35°C trip point for Jetson Orin NX/Nano
arm64: tegra: Remove duplicate PCI nodes
arm64: tegra: Sort PCI nodes correctly on Orin
arm64: tegra: Add audio support for IGX Orin
arm64: tegra: Update CPU OPP tables
arm64: tegra: Fix HSUART for Smaug
arm64: tegra: Fix HSUART for Jetson AGX Orin
arm64: tegra: Add missing alias for NVIDIA IGX Orin
...
Link: https://lore.kernel.org/r/20230728094129.3587109-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM: tegra: Device tree changes for v6.6-rc1
This contains various fixes for DT schema validation and the Pegatron
Chagall and Nexus 7 get specific compatible strings for the panels that
they use.
* tag 'tegra-for-6.6-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Provide specific compatible string for Nexus 7 panel
ARM: tegra: Use Hannstar HSD101PWW2 on Pegatron Chagall
ARM: tegra: Reuse I2C3 for NVEC
ARM: tegra: Add missing reset-names for Tegra HS UART
ARM: tegra: Remove reset-names for UART devices
ARM: tegra: Remove dmas and dma-names for debug UART
Link: https://lore.kernel.org/r/20230728094129.3587109-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
dt-bindings: Changes for v6.6-rc1
A number of Tegra-specific bindings are converted to json-schema and the
reserved-memory and BPMP bindings get support for Tegra264.
* tag 'tegra-for-6.6-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: firmware: Add support for tegra186-bpmp DRAM MRQ GSCs
dt-bindings: reserved-memory: Add support for DRAM MRQ GSCs
dt-bindings: thermal: tegra: Convert to json-schema
dt-bindings: arm: tegra: nvec: Convert to json-schema
dt-bindings: clock: tegra: Document Tegra132 compatible
dt-bindings: cpu: Document NVIDIA Tegra186 CCPLEX cluster
dt-bindings: serial: tegra-hsuart: Convert to json-schema
dt-bindings: arm: tegra: ahb: Convert to json-schema
dt-bindings: arm: tegra: flowctrl: Convert to json-schema
Link: https://lore.kernel.org/r/20230728094129.3587109-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It's not a valid binding. Instead move the sdio_rst line to the power
sequence and use w_disable1 as the vmmc-supply bringing it more in line
with other SDIO M2 cards.
Resolves following warning:
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dtb: mmc@30b50000: Unevaluated properties are not allowed ('power-supply' was unexpected)
from schema $id: http://devicetree.org/schemas/mmc/fsl-imx-esdhc.yaml#
Reported-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Otherwise the A53 cores are shut down which doesn't end well.
Reported-by: David Heidelberg <david@ixit.cz>
Tested-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Numbers are separated by dashes. Fixes the warnings:
arch/arm/boot/dts/nxp/imx/imx6q-mba6a.dtb: gpio-buttons: 'button1',
'button2', 'button3' do not match any of the regexes:
'^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/input/gpio-keys.yaml#
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
interrupt-controller is only valid for gpio subnode, remove it.
Rename touchscreen subnode according to bindings.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There is no pinctrl description under usbotg2 node, so remove the unneeded
'pinctrl-names' property.
This fixes the following schema warning:
imx8mm-beacon-kit.dtb: usb@32e50000: 'pinctrl-0' is a dependency of 'pinctrl-names'
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Remove a 'pinctrl-names' that is not associated with a corresponding
'pinctrl-names'.
This fixes the following schema warning:
imx8mm-emcon-avari.dtb: pinctrl@30330000: 'pinctrl-0' is a dependency of 'pinctrl-names'
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Per simple-card.yaml, 'simple-audio-card,audio-routing' is not a valid
property.
Change it to 'simple-audio-card,routing'.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The current imx8mp-debix-model-a.dts uses all three compatibles. Fix the
corresponding bindings by adding an own entry for it. Adapt the comment
for the "polyhex,imx8mp-debix" binding to make it clear that this should
only be used for DEBIX Model A/B i.MX8MP SBCs.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
