Breno Leitao says:
====================
netpoll: Untangle netconsole and netpoll
Initially netpoll and netconsole were created together, and some
functions are in the wrong file. Seperate netconsole-only functions
in netconsole, avoiding exports.
1. Expose netpoll logging macros in the public header to enable consistent
log formatting across netpoll consumers.
2. Relocate netconsole-specific functions from netpoll to the netconsole
module where they are actually used, reducing unnecessary coupling.
3. Remove unnecessary function exports
4. Rename netpoll parsing functions in netconsole to better reflect their
specific usage.
5. Create a test to check that cmdline works fine. This was in my todo
list since [1], this was a good time to add it here to make sure this
patchset doesn't regress.
PS: The code was split in a way that it is easy to review. When copying
the functions from netpoll to netconsole, I do not change than other
than adding `static`. This will make checkpatch unhappy, but, further
patches will address the issues. It is done this way to make it easy for
reviewers.
Link: https://lore.kernel.org/netdev/Z36TlACdNMwFD7wv@dev-ushankar.dev.purestorage.com/ [1]
v2: https://lore.kernel.org/20250611-rework-v2-0-ab1d92b458ca@debian.org
v1: https://lore.kernel.org/20250610-rework-v1-0-7cfde283f246@debian.org
====================
Link: https://patch.msgid.link/20250613-rework-v3-0-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new selftest to verify netconsole module loading with command
line arguments. This test exercises the init_netconsole() path and
validates proper parsing of the netconsole= parameter format.
The test:
- Loads netconsole module with cmdline configuration instead of
dynamic reconfiguration
- Validates message transmission through the configured target
- Adds helper functions for cmdline string generation and module
validation
This complements existing netconsole selftests by covering the
module initialization code path that processes boot-time parameters.
This test is useful to test issues like the one described in [1].
Link: https://lore.kernel.org/netdev/Z36TlACdNMwFD7wv@dev-ushankar.dev.purestorage.com/ [1]
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-8-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extract the network device and namespace cleanup logic from the
cleanup() function into a new do_cleanup() helper in lib_netcons.sh.
The do_cleanup() function only unconfigure the network and
printk, while cleanup() cleans the netconsole targets plus the network
and printk.
This refactoring let this code to be reused in cases netconsole dynamic
is not being used, as in the upcoming patch.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-7-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename netpoll_parse_options() to netconsole_parser_cmdline() and
netpoll_print_options() to netconsole_print_banner() to better
describe what these functions actually do within the netconsole
context.
Also fix minor code style issues including variable declaration
ordering and spacing.
These functions are specific to netconsole functionality rather
than general netpoll operations, so the new names better reflect
their actual purpose.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-5-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move netpoll_print_options() from net/core/netpoll.c to
drivers/net/netconsole.c and make it static. This function is only used
by netconsole, so there's no need to export it or keep it in the public
netpoll API.
This reduces the netpoll API surface and improves code locality
by keeping netconsole-specific functionality within the netconsole
driver.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-4-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move netpoll_parse_ip_addr() and netpoll_parse_options() from the generic
netpoll module to the netconsole module where they are actually used.
These functions were originally placed in netpoll but are only consumed by
netconsole. This refactoring improves code organization by:
- Removing unnecessary exported symbols from netpoll
- Making netpoll_parse_options() static (no longer needs global visibility)
- Reducing coupling between netpoll and netconsole modules
The functions remain functionally identical - this is purely a code
reorganization to better reflect their actual usage patterns. Here are
the changes:
1) Move both functions from netpoll to netconsole
2) Add static to netpoll_parse_options()
3) Removed the EXPORT_SYMBOL()
PS: This diff does not change the function format, so, it is easy to
review, but, checkpatch will not be happy. A follow-up patch will
address the current issues reported by checkpatch.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-3-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move np_info(), np_err(), and np_notice() macros from internal
implementation to the public netpoll header file to make them
available for use by netpoll consumers.
These logging macros provide consistent formatting for netpoll-related
messages by automatically prefixing log output with the netpoll instance
name.
The goal is to use the exact same format that is being displayed today,
instead of creating something netconsole-specific.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-2-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 97714695ef ("net: netconsole: Defer netpoll cleanup to
avoid lock release during list traversal"), netconsole no longer uses
__netpoll_cleanup(). With no remaining users, remove this function
from the exported netpoll API.
The function remains available internally within netpoll for use by
netpoll_cleanup().
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-1-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace pr_err() with pr_err_ratelimited() in ptp_clock_settime() to
prevent log flooding when the physical clock is free running, which
happens on some of my hosts. This ensures error messages are
rate-limited and improves kernel log readability.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250613-ptp-v1-1-ee44260ce9e2@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit says:
====================
net: phy: make phy_package a separate module
Only a handful of PHY drivers needs the PHY package functionality,
therefore make it a separate module which is built only if needed.
====================
Link: https://patch.msgid.link/eec346a4-e903-48af-8150-0191932a7a0b@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It appears that the GMAC_ANE_ADV and GMAC_ANE_LPA registers are only
available for TBI and RTBI PHY interfaces. In commit 482b3c3ba7
("net: stmmac: Drop TBI/RTBI PCS flags") support for these was dropped,
and thus it no longer makes sense to access these registers.
Remove the *_get_adv_lp() functions, and the now redundant struct
rgmii_adv and STMMAC_PCS_* definitions.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1uPkbT-004EyG-OQ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Several of the tcp_ao events are only called when CONFIG_TCP_AO is
defined. As each event can take up to 5K regardless if they are used or
not, it's best not to define them when they are not used. Add #ifdef
around these events when they are not used.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250612094616.4222daf0@batman.local.home
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
phys_port_id_show, phys_port_name_show and phys_switch_id_show would
return -EOPNOTSUPP if the netdev didn't implement the corresponding
method.
There is no point in creating these files if they are unsupported.
Put these attributes in netdev_phys_group and implement the is_visible
method. make phys_(port_id, port_name, switch_id) invisible if the netdev
dosen't implement the corresponding method.
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250612142707.4644-1-yajun.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor the way firmware names are handled for the ICSSG PRUETH driver.
Instead of using hardcoded firmware name arrays for different modes (EMAC,
SWITCH, HSR), the driver now reads the firmware names from the device tree
property "firmware-name". Only the EMAC firmware names are specified in the
device tree property. The firmware names for all other supported modes are
generated dynamically based on the EMAC firmware names by replacing
substrings (e.g., "eth" with "sw" or "hsr") as appropriate.
Example: Below are the firmwares used currently for PRU0 core
EMAC: ti-pruss/am65x-sr2-pru0-prueth-fw.elf
SW : ti-pruss/am65x-sr2-pru0-prusw-fw.elf
HSR : ti-pruss/am65x-sr2-pru0-pruhsr-fw.elf
All three firmware names are same except for the operating mode.
In general for PRU0 core, firmware name is,
ti-pruss/am65x-sr2-pru0-pru<mode>-fw.elf
Since the EMAC firmware names are defined in DT, driver will read those
directly and for other modes swap the mode name. i.e. eth -> sw or
eth -> hsr.
This preserves backwards compatibility as ICSSG driver is supported only
by AM65x and AM64x. Both of these have "firmware-name" property
populated in their device tree.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250613064547.44394-1-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: rk: much needed cleanups
This series starts attacking the reams of fairly identical duplicated
code in dwmac-rk. Every new SoC that comes along seems to need more
code added to this file because e.g. the way the clock is controlled
is different in every SoC.
The first thing to realise is that the driver only supports RMII and
RGMII interface modes. So, the first patch adds a .get_interfaces()
implementation which reports this for phylink's usage, thus ensuring
that we error out during initialisation should something that isn't
supported be specified. Note that there is one case where there are
a pair of interfaces, one supports only RMII the other supports RMII
and RGMII, but we report both anyway - something that the existing
driver allows. A future patch may attempt to fix this.
Rather than writing code, let's realise that there are two major
implementations here:
1. a struct clk that needs to be set.
2. writing a register with settings for RGMII and RMII speeds.
Provide implementations for these, Also realise that as a result
of doing this, we can kill off the .set_rgmii_speed() and
.set_rmii_speed() methods by combining them together - indeed,
this is what later SoCs already do by pointing both these methods
at the same function.
Overall, this patch series shrinks the file LOC by almost 8.7%
by removing 175 lines from over 2000 lines.
Apart from the error reporting changing and restricting interface
modes to those that the driver supports, no functional change is
anticipated with this patch. However, I have no hardware to test
this.
====================
Link: https://patch.msgid.link/aEr1BhIoC6-UM2XV@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As a result of the previous patches, many of the .set_rgmii_speed()
and .set_rmii_speed() implementations are identical apart from the
interface mode. Add a new .set_speed() function which takes the
interface mode in addition to the speed, and use it to combine the
separate implementations, calling the common rk_set_reg_speed()
function.
Also convert rk_set_clk_mac_speed() to be called by this new method
pointer, rather than having these implementations called from both
.set_*_speed() methods.
Remove all the error messages from the .set_speed() methods, as these
return an error code which is propagated up to stmmac_mac_link_up()
which will print the error.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uPk39-004CFf-7a@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a common pattern in the driver where many SoCs need to write a
single register with a value dependent on the interface mode and speed.
Rather than having a lot of repeated code, add some common functions
and a struct to contain the values to be written to a register to
select the RGMII and RMII speeds.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uPk2t-004CFN-Td@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rather than having lots of regmap_write()s to the same register but
with different values depending on the speed, reorganise the
functions to use a local variable for the value, and then have one
regmap_write() call to write it to the register. This reduces the
amount of code and is a step towards further reducing the code size.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uPk2o-004CFH-Q4@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RK platforms support RGMII and/or RMII depending on the SoC. Detect
whether support for a SoC exists by whether the interface specific
set_to functions have been populated, and set the appropriate bits in
phylink's bitmap of interfaces.
This assumes all dwmac interfaces on a SoC have identical support,
but it should be noted that this is not true for RK3528 which only
supports RGMII on GMAC1. However, the existing code structure
permits RGMII to be configured on GMAC0 without complaint, so
preserve this behaviour even though it is incorrect to avoid
functional change.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uPk2j-004CF6-Mf@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arkadiusz Kubalewski says:
====================
dpll: add all inputs phase offset monitor
Add dpll device level feature: phase offset monitor.
Phase offset measurement is typically performed against the current active
source. However, some DPLL (Digital Phase-Locked Loop) devices may offer
the capability to monitor phase offsets across all available inputs.
The attribute and current feature state shall be included in the response
message of the ``DPLL_CMD_DEVICE_GET`` command for supported DPLL devices.
In such cases, users can also control the feature using the
``DPLL_CMD_DEVICE_SET`` command by setting the ``enum dpll_feature_state``
values for the attribute.
Once enabled the phase offset measurements for the input shall be returned
in the ``DPLL_A_PIN_PHASE_OFFSET`` attribute.
Implement feature support in ice driver for dpll-enabled devices.
Verify capability:
$ ./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/dpll.yaml \
--dump device-get
[{'clock-id': 4658613174691613800,
'id': 0,
'lock-status': 'locked-ho-acq',
'mode': 'automatic',
'mode-supported': ['automatic'],
'module-name': 'ice',
'type': 'eec'},
{'clock-id': 4658613174691613800,
'id': 1,
'lock-status': 'locked-ho-acq',
'mode': 'automatic',
'mode-supported': ['automatic'],
'module-name': 'ice',
'phase-offset-monitor': 'disable',
'type': 'pps'}]
Enable the feature:
$ ./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/dpll.yaml \
--do device-set --json '{"id":1, "phase-offset-monitor":"enable"}'
Verify feature is enabled:
$ ./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/dpll.yaml \
--dump device-get
[
[...]
{'capabilities': {'all-inputs-phase-offset-monitor'},
'clock-id': 4658613174691613800,
'id': 1,
[...]
'phase-offset-monitor': 'enable',
[...]]
v6:
- rebase.
====================
Link: https://patch.msgid.link/20250612152835.1703397-1-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement a new admin command and helper function to handle and obtain
CGU measurements for input pins.
Add new callback operations to control the dpll device-level feature
"phase offset monitor," allowing it to be enabled or disabled. If the
feature is enabled, provide users with measured phase offsets and
notifications.
Initialize PPS DPLL with new callback operations if the feature is
supported by the firmware.
Reviewed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250612152835.1703397-4-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oleksij Rempel says:
====================
dp83tg720: Reduce link recovery
This patch series improves the link recovery behavior of the TI
DP83TG720 PHY driver.
Previously, we introduced randomized reset delay logic to avoid reset
collisions in multi-PHY setups. While this approach was functional, it
had notable drawbacks: unpredictable behavior, longer and more variable
link recovery times, and overall higher complexity in link handling.
With this new approach, we replace the randomized delay with
deterministic, role-specific delays in the PHY reset logic. This enables
us to:
- Remove the redundant empirical 600 ms delay in read_status()
- Drop the random polling interval logic
- Introduce a clean, adaptive polling strategy with consistent
behavior and improved responsiveness
As a result, the PHY is now able to recover link reliably in under
1000_ms
====================
Link: https://patch.msgid.link/20250612104157.2262058-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the PHY reset logic includes a role-specific asymmetric delay
to avoid synchronized reset deadlocks, the previously used randomized
polling intervals are no longer necessary.
This patch removes the get_random_u32_below()-based logic and introduces
an adaptive polling strategy:
- Fast polling for a short time after link-down
- Slow polling if the link remains down
- Slower polling when the link is up
This balances CPU usage and responsiveness while avoiding reset
collisions. Additionally, the driver still relies on polling for
all link state changes, as interrupt support is not implemented,
and link-up events are not reliably signaled by the PHY.
The polling parameters are now documented in the updated top-of-file
comment.
Co-developed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250612104157.2262058-4-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a .soft_reset callback for the DP83TG720 PHY that issues a hardware
reset followed by an asymmetric post-reset delay. The delay differs
based on the PHY's master/slave role to avoid synchronized reset
deadlocks, which are known to occur when both link partners use
identical reset intervals.
The delay includes:
- a fixed 1ms wait to satisfy MDC access timing per datasheet, and
- an empirically chosen extra delay (97ms for master, 149ms for slave).
Co-developed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250612104157.2262058-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shannon Nelson says:
====================
ionic: three little changes
These are three little changes for the code from inspection
and testing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
