Some fixes for rk8xx pmics to make them follow
the dt-binding better.
* tag 'v5.18-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Update regulator name for PX3
ARM: dts: rockchip: Add #clock-cells value for rk805
Link: https://lore.kernel.org/r/3788968.RB9BLzCXGK@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Some corrections for the rk80x pmic nodes, a supply fix for rk3399-firefly
and addition of the usb/sata combophys for rk3568.
* tag 'v5.18-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add #clock-cells value for rk805
arm64: dts: rockchip: Remove vcc13 and vcc14 for rk808
arm64: dts: rockchip: Fix SDIO regulator supply properties on rk3399-firefly
arm64: dts: rockchip: add naneng combo phy nodes for rk3568
Link: https://lore.kernel.org/r/13959624.7hp8jFWaoN@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM64-based SoCs Device Tree updates
for 5.18, please pull the following:
- Krzysztof aligns the PL330 DMA controller node name to the schema
- Rafal corrects the TWD (Timer/Watchdog) block, adds the watchdog node,
I2C controller node and the pinctrl node for the 4908 SoC
- Kuldeep fixes the Northstar 2 SPI properties as well as the PL022 SPI
controller clock names
- Frank fixes the SATA node names to conform to the AHCI controller
schema
* tag 'arm-soc/for-5.18/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: stingray: Fix spi clock name
arm64: dts: ns2: Fix spi clock name
arm64: dts: broadcom: Fix sata nodename
arm64: dts: ns2: Fix spi-cpol and spi-cpha property
arm64: dts: broadcom: bcm4908: add I2C block
arm64: dts: broadcom: bcm4908: add watchdog block
arm64: dts: broadcom: bcm4908: add pinctrl binding
arm64: dts: broadcom: bcm4908: use proper TWD binding
arm64: dts: broadcom: align pl330 node name with dtschema
Link: https://lore.kernel.org/r/20220307194817.3754107-3-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.18, please pull the following:
- Arinc defines the switch ports of the RTL8365MB switch on the Asus
RT-AC88U
- Richard provides cache information for the BCM2835/36/37 and BCM2711
SoCs such that tools like "lscpu -C" can report it when supported
- Stefan adds support for the Raspberry Pi Zero 2 W (wireless)
- Matthew defines the MAC address NVMEM cells for the Cisco Meraki
MX64/MX65 devices, he also fixes the LED for these platforms.
- Rafal adds the MAC addres NVMEM cell for the Luxul XWR-3150
* tag 'arm-soc/for-5.18/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: Add Ethernet MAC address to Luxul XWR-3150
ARM: dts: NSP: MX6X: correct LED function types
ARM: dts: NSP: MX6X: get mac-address from eeprom
arm64: dts: broadcom: Add reference to RPi Zero 2 W
ARM: dts: Add Raspberry Pi Zero 2 W
dt-bindings: arm: bcm2835: Add Raspberry Pi Zero 2 W
ARM: dts: bcm2835/6: Add the missing L1/L2 cache information
ARM: dts: bcm2711: Add the missing L1/L2 cache information
ARM: dts: bcm2837: Add the missing L1/L2 cache information
ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U
Link: https://lore.kernel.org/r/20220307194817.3754107-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Minor cleanup of ARM64 DTS for v5.18
The DT schema expects DMA controller nodes to follow certain node naming
and having dma-cells property. Adjust the DTS files to pass DT schema
checks.
* tag 'dt64-cleanup-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: lg: align pl330 node name with dtschema
arm64: dts: lg: add dma-cells to pl330 node
arm64: dts: juno: align pl330 node name with dtschema
Link: https://lore.kernel.org/r/20220307173614.157884-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
SPI clock name for pl022 is "sspclk" and not "spiclk".
Also fix below dtc warning:
clock-names:0: 'spiclk' is not one of ['SSPCLK', 'sspclk']
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
SPI clock name for pl022 is "sspclk" and not "spiclk".
Also fix below dtc warning:
clock-names:0: 'spiclk' is not one of ['SSPCLK', 'sspclk']
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add NAND support. The sama7g5's SMC IP is the same as sama5d2's with
a slightly change: it provides a synchronous clock output (SMC clock)
that is dedicated to FPGA usage. Since this doesn't interfere with the SMC
NAND configuration, thus code will not be added in the current nand driver
to address the FPGA usage, use the sama5d2's compatible and choose not to
introduce dedicated compatibles for sama7g5.
Tested with Micron MT29F4G08ABAEAWP NAND flash.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
[nicolas.ferre@microchip.com: add the definition of PMC_MCK1 in
include/dt-bindings/clock/at91.h from another patch]
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220111130556.905978-1-tudor.ambarus@microchip.com
After converting ahci-platform txt binding to yaml nodename is reported
as not matching the standard:
arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dt.yaml:
ahci@663f2000: $nodename:0: 'ahci@663f2000' does not match '^sata(@.*)?$'
Fix it to match binding.
Fixes: ac9aae00f0 ("arm64: dts: Add SATA3 AHCI and SATA3 PHY DT nodes for NS2")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The N5X platform has the Synopsys DDR controller the includes an EDAC
controller. Add the entry for the controller in the DTS file instead of
the base Agilex DTSI because the base Agilex does not have the
controller.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
USB DWC2 requires clock-names:
arm64/boot/dts/altera/socfpga_stratix10_socdk_nand.dt.yaml:
usb@ffb00000: 'clock-names' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The driver parses disable-over-current protection and some
implementations use it (e.g. Altera Stratix10), so document it in the
bindings.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The DWC2 node might use IOMMU (e.g. Altera Stratix10), so add "iommus"
property. This fixes warnings like:
arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dt.yaml:
usb@ffb40000: 'iommus' does not match any of the regexes: 'pinctrl-[0-9]+'
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
- add initial support for mt6582 and Prestigio PMT5008 3G tablet
- add basic support for Airoha EN7523
* tag 'v5.17-next-dts32' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
ARM: dts: add GPIO support for Airoha EN7523
ARM: Add basic support for Airoha EN7523 SoC
dt-bindings: arm: airoha: Add binding for EN7523 SoC and EVB
dt-bindings: Add vendor prefix for Airoha
dt-bindings: mediatek: Adds a DT binding documentation for the MT6582 SoC
ARM: dts: Add initial support for Prestigio PMT5008 3G tablet
ARM: dts: Add initial support for Mediatek mt6582
Link: https://lore.kernel.org/r/3974dc7e-4185-4d88-ab5b-031a7d24214d@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm ARM64 DeviceTree updates for v5.18
New platforms: Snapdragon 625 and Snapdragon 632
New boards: Google Herobrine R1, Fairphone FP3, SHIFT6mq, Samsung Galaxy
Book2 and Snapdragon 8 Gen 1 Hardware Development Kit (HDK)
On IPQ6018 the USB reference period is corrected, GICv2m support is
enabled and the max-link-speed for PCIe is specified.
IPQ8074 adds description of GIVv2m and SMEM, and ensures that TrustZone
related memory is reserved from Linux.
On the Snapdragon 7c Gen 3 (SC7280) description of display, displayport,
L3 interconnect, bluetooth, CPU opp-tables are added. Another revision
of the Google Herobrine is introduced and a bunch of cleanups are
introduced.
On Snapdragon 845 new support for the SHIFT6mq device is introduced, the
OnePlus devices gains fuel gauge and the platform gains GSI DMA support,
which is enabled for SPI (for now).
On the Snapdragon 850 based WindowsOnSnapdragon laptops, initial support
for Samsugn Galaxy Book2 is introduced and the Lenovo Yoga C630 gains
description of its backlight controls.
The Snapdragon 625 platform (MSM8953) the thereof derrived Snapdragon
632 platform is introduced, with initial description of the Fairphone 3.
Fairphone 4 on the SM7225 platform gains proper WLED configuration.
On Snapdragon 855 (SM8150) description of the limits hardware (LMh) is
introduced and the SPI and I2C devices are wired to the GSI DMA controller.
On Snapdragon 865 (SM8250) the CPU and cluster idle states are
introduced, the MSI interrupts for PCIe 1 and 2 are corrected and the
CPUfreq driver gains knowledge about thermal pressure interrupts.
On Snapdragon 8 Gen 1 (SM8450) LLCC, interconnect and remoteproc
descriptions are added. The SM8450 Hardware Development Kit is
introduced and the QRD has its remoteproc instances enabled.
Cluster idle and RPMh parameters are corrected on SM8150, SM8350 and
SM8540.
The IPA device on SC7180, SC7280 and SM8350 gains knowledge of the AOSS
QMP mailbox, allowing it to enable retention of IPA registers during
power collapse.
DeviceTree validation issues related to thermal zone naming, missing
CPU, device and platform compatibles, APR, Google EC PWM, DB410c sound,
QCS404 opp-tables and SM8250 PCIe nodes are corrected.
A bunch of cleanups and style fixes for MSM8992, MSM8994, MSM8996 and
MSM8916 are introduced as well.
* tag 'qcom-arm64-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (96 commits)
arm64: dts: qcom: sdm632: Add device tree for Fairphone 3
dt-bindings: arm: qcom: Document sdm632 and fairphone,fp3 board
arm64: dts: qcom: Add SDM632 device tree
arm64: dts: qcom: Add PM8953 PMIC
arm64: dts: qcom: Add MSM8953 device tree
dt-bindings: arm: cpus: Add Kryo 250 CPUs
arm64: dts: qcom: msm8916-longcheer-l8150: Add light and proximity sensor
arm64: dts: qcom: align Google CROS EC PWM node name with dtschema
arm64: dts: qcom: Add support for Samsung Galaxy Book2
arm64: dts: qcom: msm8996: convert xo_board to RPM_SMD_BB_CLK1
arm64: dts: qcom: msm8996: add cxo and sleep-clk to gcc node
arm64: dts: qcom: sdm845: add bi_tcxo to camcc
arm64: dts: qcom: sdm845: enable dma for spi
arm64: dts: qcom: sdm845: Add gsi dma node
arm64: dts: qcom: sc7280: Add cpu OPP tables
arm64: dts: qcom: sc7280: Add EPSS L3 interconnect provider
arm64: dts: qcom: sm8450: Add LLCC/system-cache-controller node
arm64: dts: qcom: ipq6018: drop the clock-frequency property
arm64: dts: qcom: ipq8074: drop the clock-frequency property
arm64: dts: qcom: sm8450: add interconnect nodes
...
Link: https://lore.kernel.org/r/20220301053929.1809684-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
EN7523 is an armv8 based silicon used inside broadband access type devices
such as xPON and xDSL. It shares various silicon blocks with MediaTek
silicon such as the MT7622.
Add basic support for Airoha EN7523, enough for booting to console.
The UART is basically 8250-compatible, except for the clock selection.
A clock-frequency value is synthesized to get this to run at 115200 bps.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Bert Vermeulen <bert@biot.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20220130145116.88406-4-nbd@nbd.name
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Broadcom ns2 platform has spi-cpol and spi-cpho properties set
incorrectly. As per spi-slave-peripheral-prop.yaml, these properties are
of flag or boolean type and not integer type. Fix the values.
Fixes: d69dbd9f41 (arm64: dts: Add ARM PL022 SPI DT nodes for NS2)
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
CC: Ray Jui <rjui@broadcom.com>
CC: Scott Branden <sbranden@broadcom.com>
CC: Florian Fainelli <f.fainelli@gmail.com>
Luxul XWR-3150 stores MAC as NVRAM variable. Add NVMEM cell for it and
reference it in the Ethernet interface node.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
CTERA Networks Intl. is a company based in Israel.
They manufacture NASes, network devices and provide software
products for cloud storage and IT security.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The clock binding documents PCIe clock for a long time already. Add
clock phande into the PCIe node.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
