intel_port_to_tc() returns the PORT_TC1..6 -> TC_PORT_1..6 mapping only
for DDI ports that are connected to a TypeC PHY. In some cases this
mapping is also required for TypeC DDI ports which are not connected to
a TypeC PHY. Such DDI ports are the PORT_TC1..4 ports on RKL/ADLS/BMG.
Add a separate intel_tc_phy_to_tc() helper to return the mapping for
ports connected to a TypeC PHY, and make all the current users - which
expect this semantic - call this helper. A follow-up change will need to
get the same mapping for TypeC DDI ports not connected to a TypeC PHY,
leave intel_port_to_tc() exported for that.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251120172358.1282765-2-imre.deak@intel.com
The intel_port_to_tc() call in mtl_port_to_pll_id() assumed that all
TypeC DDI ports are connected to a TypeC PHY. This is not true on BMG
where all the ports - including the PORT_TC1..4 TypeC DDI ports - are
connected to a non-TypeC PHY. For these ports intel_port_to_tc()
returns TC_PORT_NONE, which results in an incorrect port -> PLL ID
mapping. Fix this up by using the expected PORT_TC1..4 port ->
TC_PORT_1..4 tc_port mapping on BMG as well.
Fixes: ca1eda5cd4 ("drm/i915/cx0: Add MTL+ .get_dplls hook")
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251120172358.1282765-1-imre.deak@intel.com
The selective fetch code doesn't handle asycn flips correctly.
There is a nonsense check for async flips in
intel_psr2_sel_fetch_config_valid() but that only gets called
for modesets/fastsets and thus does nothing for async flips.
Currently intel_async_flip_check_hw() is very unhappy as the
selective fetch code pulls in planes that are not even async
flips capable.
Reject async flips when selective fetch is enabled, until
someone fixes this properly (ie. disable selective fetch while
async flips are being issued).
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251105171015.22234-1-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Add an irq parent driver interface for the .enabled and .synchronize
calls. This lets us drop the dependency on i915_drv.h and i915_irq.h in
multiple places, and subsequently remove the compat i915_irq.h and
i915_irq.c files along with the display/ext directory from xe
altogether.
Introduce new intel_parent.[ch] as the wrapper layer to chase the
function pointers and convert between generic and more specific display
types.
v2: Keep static wrappers in intel_display_irq.c (Ville)
v3: Full blown wrappers in intel_parent.[ch] (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/dd62dd52ef10d9ecf77da3bdf6a70f71193d141c.1763370931.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Duplicate gen2_irq_reset(), gen2_assert_iir_is_zero(), gen2_irq_init(),
gen2_error_reset(), and gen2_error_init() in intel_display_irq.c.
This allows us to drop the duplicates from xe, and prepares for future
cleanups. Although duplication is undesirable in general, in this case
the local duplicates lead to a cleaner end result.
There's a slight wrinkle in gen2_assert_iir_is_zero(). We need to use
non-device based logging until we pass in struct intel_display in a
separate change.
v2:
- Keep xe compat stuff due to series reorder and rebase
- Keep the WARN as regular WARN
- Rename the functions in the same go
Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/296d74731cce57ab7534c57969d3146294adda57.1763370931.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Unfortunately the MAD_DIMM DIMM_S and DIMM_L bits on ICL are
not idential, so we are currently decoding DIMM_S incorrectly.
Fix the problem by defining the DIMM_S and DIMM_L bits separately.
And for consistency do that same for SKL, even though there the
bits do match between the two DIMMs. The result is rather
repetitive in places, but I didn't feel like obfuscatign things
with cpp macros/etc.
Broken decoding on Dell XPS 13 7390 2-in-1:
CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no
CH0 DIMM S size: 32 Gb, width: X32, ranks: 3, 16Gb+ DIMMs: no
CH0 ranks: 2, 16Gb+ DIMMs: no
CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no
CH1 DIMM S size: 32 Gb, width: X32, ranks: 3, 16Gb+ DIMMs: no
CH1 ranks: 2, 16Gb+ DIMMs: no
Memory configuration is symmetric? no
Fixed decoding on Dell XPS 13 7390 2-in-1:
CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no
CH0 DIMM S size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no
CH0 ranks: 2, 16Gb+ DIMMs: no
CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no
CH1 DIMM S size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no
CH1 ranks: 2, 16Gb+ DIMMs: no
Memory configuration is symmetric? yes
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251029204215.12292-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
MTL+ platforms are supported by dpll framework remove a separate
check for hw comparison and rely solely on dpll framework
hw comparison.
Finally, all required hooks are now in place so initialize
PLL manager for MTL+ platforms and remove the redirections
to the legacy code paths from the following interfaces:
* intel_encoder::clock_enable/disable()
* intel_encoder::get_config()
* intel_dpll_funcs::get_hw_state()
* intel_ddi_update_active_dpll()
* pipe_config_pll_mismatch()
v2: Rebase on !HAS_LT_PHY check in intel_ddi_update_active_dpll()
v3: Rebase on !display->dpll.mgr check in intel_ddi_update_active_dpll()
Add check for NVL as the platform is not part of pll framework (Suraj)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251118132859.2584452-1-mika.kahola@intel.com
Add the PLL hooks for the TBT PLL on MTL+. These are simple stubs
similarly to the TBT PLL on earlier platforms, since this PLL is always
on from the display POV - so no PLL enable/disable programming is
required as opposed to the non-TBT PLLs - and the clocks for different
link rates are enabled/disabled at a different level, via the
intel_encoder::enable_clock()/disable_clock() interface.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-32-mika.kahola@intel.com
Add .get_dplls function pointer for MTL+ platforms
to support dpll framework. Reuse the ICL function
pointer.
v2: Getting configuration either for a C10 or on the PTL port B
eDP on TypeC PHY case for a C20 PHY PLL. Hence refer to this
case as "non_tc_phy" instead of "c10phy".
v3: Fix comment to "eDP over TypeC" (Suraj)
Fix pll id as separate variable (Suraj)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-20-mika.kahola@intel.com
To bring MTL+ platform aligned call and calculate PLL state
from dpll framework.
v2: Rename mtl_compute_c10phy_dpll() to mtl_compute_non_tc_phy_dpll().
The state is computed either for a C10 or on the PTL port B eDP
over TypeC PHY case for a C20 PHY PLL. Hence refer to this case as
"non_tc_phy" instead of "c10phy".
Rename mtl_compute_c20phy_dplls() to mtl_compute_tc_phy_dplls() for
symmetry with mtl_compute_non_tc_phy_dpll().
v3: Reword commit message (Suraj)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-19-mika.kahola@intel.com
Update several functions in intel_cx0_phy.c to make PLL state
management more explicit.
Changes include
* add 'const' qualifiers to intel_crtc_state parameter for
cx0 state calculation functions
* refactor C10/C20 PLL state calculations helpers to take
explicit hardware state pointers instead of directly modifying
'crtc_state->dpll_hw_state'
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-18-mika.kahola@intel.com
