Replace all open-coded access to MCR and SCU registers in Gen2 with the
appropriate calls to ast_moutdwm() and ast_mindwm(). Use MCR and SCU
register constants. Name variables according to registers.
The values in MCR04 that control VRAM allocation do not look correct.
Leave a FIXME comment for later investigation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20260327133532.79696-12-tzimmermann@suse.de
Replace all open-coded access to MCR registers in Gen1 with the
appropriate calls to ast_moutdwm() and ast_mindwm(). Use MCR register
constants.
For the poll loop on MCR100, add ast_moutdwm_poll(). The helper polls
the register until it has been updated to the given value. Relax the
CPU while busy-waiting.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20260327133532.79696-11-tzimmermann@suse.de
Struct ast_dramstruct contains a 16-bit index field that either
contains a magic value or serves as index into the P2A address
segment at 0x1e600000. This segment serves MCR and SCU registers,
which the ast_dramstruct programs. It's fragile and relies upon
the ast_post_chip_*() functions to set up the segment correctly.
Replace the 16-bit index with a full 32-bit address of the SCU
and MCR addresses. Initialize the DRAM tables with full register
constants and write them out with ast_moutdwm(). This sets the
correct segment on each write.
Drop __AST_DRAMSTRUCT_DRAM_TYPE as it simply referred to MCR04.
Use the latter for initializing the DRAM tables.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20260327133532.79696-10-tzimmermann@suse.de
Aspeed hardware allows for acceessing the SDRAM from the host. SDRAM
registers are located at the memory range at [0x80000000, 0xffffffff].
Refer to memory access with the macro AST_SDRAM(). Also add a TODO item
for the nonsensical documentation next to its caller.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20260327133532.79696-9-tzimmermann@suse.de
WDT is the Watchdog timer. WDC registers are located at the memory
range at [0x1e785000, 0x1e785fff]. There are currently up to 8
watchdog timers in the range, of which 2 are being used by AST2500.
Refer to them with macros named AST_REG_WDT<n>, where <n> is the byte
offset into the watchdog timer's memory range. Each macro also takes
the index of the watchdog timer to access. A new watchdog timer starts
at each 0x40 byte offset.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20260327133532.79696-8-tzimmermann@suse.de
SCU is the System Control Unit. SCU registers are located in the memory
range at [0x1e6e2000, 0x1e6e2fff]. Refer to them with constants named
AST_REG_SCU<n>, where <n> is the byte offset into the range.
Replacing the magic values in the ast driver was done with grep and sed
as shown below
git grep -l \,\ 0x1e6e2 | xargs sed -i -e 's/, 0x1e6e2/, AST_REG_SCU/g'
git grep -l \,\ 0x1E6E2 | xargs sed -i -e 's/, 0x1E6E2/, AST_REG_SCU/g'
plus some manual fixes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20260327133532.79696-6-tzimmermann@suse.de
SDRAM registers are located in the memory range at
[0x1e160000, 0x1e160fff]. Refer to them with constants named
AST_REG_MCR<n>, where n is the byte offset into the range.
Replacing the magic values in the ast driver was done with grep
and sed as shown below
git grep -l \,\ 0x1e6e00 | xargs sed -i -e 's/, 0x1e6e00/, AST_REG_MCR/g'
git grep -l \,\ 0x1E6E00 | xargs sed -i -e 's/, 0x1E6E00/, AST_REG_MCR/g'
plus some manual fixes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20260327133532.79696-5-tzimmermann@suse.de
The helpers ast_mindwm() and ast_moutdwm() access the I/O memory of
the various IP modules on the Aspeed device. This is based on the
"P-Bus to AHB Bridge" interface.
Reimplement the access function with properly defined constants and
helper macros.
- Define P2A constants for the related registers and addresses. The P2A
interface is located in the memory range at [0x00000000, 0x00010000].
- Memory access is segmented. An address' upper 16-bit select the
memory segment, the lower 16-bit select the offset within the segment.
Implement segment selection in a shared helper __ast_segsel(). Validate
that the segment hs been changes. This logic has previously been part
of __ast_moudwm() and __ast_mindwm(). Relax the CPU while busy-waiting.
- Put intra-segment reads and writes in the helpers __ast_rdseg32()
and __ast_wrseg32(). The helpers set the segment offset automatically.
- Reimplement the existing interfaces on top of these helpers.
Put the new implementation next to the other I/O helpers.
v2:
- fix typo in commit description (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patch.msgid.link/20260327133532.79696-3-tzimmermann@suse.de
Fix the following W=1 kerneldoc warnings by adding the missing parameter
descriptions for @ptdev and @events in panthor_sched_report_fw_events()
and @ptdev in panthor_sched_report_mmu_fault()
Warning: drivers/gpu/drm/panthor/panthor_sched.c:1898 function parameter 'ptdev' not described in 'panthor_sched_report_fw_events'
Warning: drivers/gpu/drm/panthor/panthor_sched.c:1898 function parameter 'events' not described in 'panthor_sched_report_fw_events'
Warning: drivers/gpu/drm/panthor/panthor_sched.c:2783 function parameter 'ptdev' not described in 'panthor_sched_report_mmu_fault'
Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Signed-off-by: Yicong Hui <yiconghui@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20260405192309.389039-1-yiconghui@gmail.com
This gets the memory sizes from the nodes and stores the limit
as 50% of those. I think eventually we should drop the limits
once we have memcg aware shrinking, but this should be more NUMA
friendly, and I think seems like what people would prefer to
happen on NUMA aware systems.
Cc: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The list_lru will now handle numa for us, so no need to keep
separate pool types for it. Just consolidate into the global ones.
This adds a debugfs change to avoid dumping non-existant orders due
to this change.
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is an initial port of the TTM pools for
write combined and uncached pages to use the list_lru.
This makes the pool's more NUMA aware and avoids
needing separate NUMA pools (later commit enables this).
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
While discussing memcg intergration with gpu memory allocations,
it was pointed out that there was no numa/system counters for
GPU memory allocations.
With more integrated memory GPU server systems turning up, and
more requirements for memory tracking it seems we should start
closing the gap.
Add two counters to track GPU per-node system memory allocations.
The first is currently allocated to GPU objects, and the second
is for memory that is stored in GPU page pools that can be reclaimed,
by the shrinker.
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: linux-mm@kvack.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Route DETACH_DEBUG_BO through aie2_config_debug_bo() the same way as
ATTACH_DEBUG_BO.
The scheduler switch in aie2_sched_job_run() already handles
ATTACH_DEBUG_BO with aie2_config_debug_bo(), but DETACH_DEBUG_BO was
not included in that path. Add an explicit fallthrough so both attach
and detach operations use the same handler.
This fixes debug BO detach handling by ensuring the detach command is
processed by the expected configuration path.
Fixes: 7ea0468380 ("accel/amdxdna: Support firmware debug buffer")
Signed-off-by: Max Zhen <max.zhen@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260406211403.4011988-1-lizhi.hou@amd.com
Thomas Zimmermann needs 2f42c1a616 ("drm/ast: dp501: Fix
initialization of SCU2C") for drm-misc-next.
Conflicts:
- drivers/gpu/drm/amd/display/dc/hwss/dcn401/dcn401_hwseq.c
Just between e927b36ae1 ("drm/amd/display: Fix NULL pointer
dereference in dcn401_init_hw()") and it's cherry-pick that confused
git.
- drivers/gpu/drm/amd/pm/swsmu/smu11/smu_v11_0.c
Deleted in 6b0a611628 ("drm/amd/pm: Unify version check in SMUv11")
but some cherry-picks confused git. Same for v12/v14.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Pull RISC-V fixes from Paul Walmsley:
- Fix a CONFIG_SPARSEMEM crash on RV32 by avoiding early phys_to_page()
- Prevent runtime const infrastructure from being used by modules,
similar to what was done for x86
- Avoid problems when shutting down ACPI systems with IOMMUs by adding
a device dependency between IOMMU and devices that use it
- Fix a bug where the CPU pointer masking state isn't properly reset
when tagged addresses aren't enabled for a task
- Fix some incorrect register assignments, and add some missing ones,
in kgdb support code
- Fix compilation of non-kernel code that uses the ptrace uapi header
by replacing BIT() with _BITUL()
- Fix compilation of the validate_v_ptrace kselftest by working around
kselftest macro expansion issues
* tag 'riscv-for-linus-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
ACPI: RIMT: Add dependency between iommu and devices
selftests: riscv: Add braces around EXPECT_EQ()
riscv: use _BITUL macro rather than BIT() in ptrace uapi and kselftests
riscv: Reset pmm when PR_TAGGED_ADDR_ENABLE is not set
riscv: make runtime const not usable by modules
riscv: patch: Avoid early phys_to_page()
riscv: kgdb: fix several debug register assignment bugs
Pull perf fix from Ingo Molnar:
- Fix potential bad container_of() in intel_pmu_hw_config() (Ian
Rogers)
* tag 'perf-urgent-2026-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix potential bad container_of in intel_pmu_hw_config
Pull irq fix from Ingo Molnar:
- Fix RISC-V APLIC irqchip driver setup errors on ACPI systems (Jessica
Liu)
* tag 'irq-urgent-2026-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/riscv-aplic: Restrict genpd notifier to device tree only
In eb_lookup_vma(), the code checks that the context vm matches before
incrementing the i915 vma usage count, but for the non-matching case it
didn't clear the non-matching vma pointer, so it would then mistakenly
be returned, causing potential UaF and refcount issues.
Reported-by: Yassine Mounir <sosohero200@gmail.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull MIPS fixes from Thomas Bogendoerfer:
- Fix TLB uniquification for systems with TLB not initialised by
firmware
- Fix allocation in TLB uniquification
- Fix SiByte cache initialisation
- Check uart parameters from firmware on Loongson64 systems
- Fix clock id mismatch for Ralink SoCs
- Fix GCC version check for __mutli3 workaround
* tag 'mips-fixes_7.0_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: mm: Allocate tlb_vpn array atomically
MIPS: mm: Rewrite TLB uniquification for the hidden bit feature
MIPS: mm: Suppress TLB uniquification on EHINV hardware
MIPS: Always record SEGBITS in cpu_data.vmbits
MIPS: Fix the GCC version check for `__multi3' workaround
MIPS: SiByte: Bring back cache initialisation
mips: ralink: update CPU clock index
MIPS: Loongson64: env: Check UARTs passed by LEFI cautiously
Pull char/misc/iio driver fixes from Greg KH:
"Here are a relativly large number of small char/misc/iio and other
driver fixes for 7.0-rc7. There's a bunch, but overall they are all
small fixes for issues that people have been having that I finally
caught up with getting merged due to delays on my end.
The "largest" change overall is just some documentation updates to the
security-bugs.rst file to hopefully tell the AI tools (and any users
that actually read the documentation), how to send us better security
bug reports as the quantity of reports these past few weeks has
increased dramatically due to tools getting better at "finding"
things.
Included in here are:
- lots of small IIO driver fixes for issues reported in 7.0-rc
- gpib driver fixes
- comedi driver fixes
- interconnect driver fix
- nvmem driver fixes
- mei driver fix
- counter driver fix
- binder rust driver fixes
- some other small misc driver fixes
All of these have been in linux-next this week with no reported issues"
* tag 'char-misc-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (63 commits)
Documentation: fix two typos in latest update to the security report howto
Documentation: clarify the mandatory and desirable info for security reports
Documentation: explain how to find maintainers addresses for security reports
Documentation: minor updates to the security contacts
.get_maintainer.ignore: add myself
nvmem: zynqmp_nvmem: Fix buffer size in DMA and memcpy
nvmem: imx: assign nvmem_cell_info::raw_len
misc: fastrpc: check qcom_scm_assign_mem() return in rpmsg_probe
misc: fastrpc: possible double-free of cctx->remote_heap
comedi: dt2815: add hardware detection to prevent crash
comedi: runflags cannot determine whether to reclaim chanlist
comedi: Reinit dev->spinlock between attachments to low-level drivers
comedi: me_daq: Fix potential overrun of firmware buffer
comedi: me4000: Fix potential overrun of firmware buffer
comedi: ni_atmio16d: Fix invalid clean-up after failed attach
gpib: fix use-after-free in IO ioctl handlers
gpib: lpvo_usb: fix memory leak on disconnect
gpib: Fix fluke driver s390 compile issue
lis3lv02d: Omit IRQF_ONESHOT if no threaded handler is provided
lis3lv02d: fix kernel-doc warnings
...
Pull tty fixes from Greg KH:
"Here are two small tty vt fixes for 7.0-rc7 to resolve some reported
issues with the resize ability of the alt screen buffer. Both of these
have been in linux-next all week with no reported issues"
* tag 'tty-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
vt: resize saved unicode buffer on alt screen exit after resize
vt: discard stale unicode buffer on alt screen exit after resize
Pull USB/Thunderbolt fixes from Greg KH:
"Here are a bunch of USB and Thunderbolt fixes (most all are USB) for
7.0-rc7. More than I normally like this late in the release cycle,
partly due to my recent travels, and partly due to people banging away
on the USB gadget interfaces and apis more than normal (big shoutout
to Android for getting the vendors to actually work upstream on this,
that's a huge win overall for everyone here)
Included in here are:
- Small thunderbolt fix
- new USB serial driver ids added
- typec driver fixes
- gadget driver fixes for some disconnect issues
- other usb gadget driver fixes for reported problems with binding
and unbinding devices as happens when a gadget device connects /
disconnects from a system it is plugged into (or it switches device
mode at a user's request, these things are complex little
beasts...)
- usb offload fixes (where USB audio tunnels through the controller
while the main CPU is asleep) for when EMP spikes hit the system
causing disconnects to happen (as often happens with static
electricity in the winter months). This has been much reported by
at least one vendor, and resolves the issues they have been seeing
with this codepath. Can't wait for the "formal methods are the
answer!" people to try to model that one properly...
- Other small usb driver fixes for issues reported.
All of these have been in linux-next this week, and before, with no
reported issues, and I've personally been stressing these harder than
normal on my systems here with no problems"
* tag 'usb-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (39 commits)
usb: gadget: f_hid: move list and spinlock inits from bind to alloc
usb: host: xhci-sideband: delegate offload_usage tracking to class drivers
usb: core: use dedicated spinlock for offload state
usb: cdns3: gadget: fix state inconsistency on gadget init failure
usb: dwc3: imx8mp: fix memory leak on probe failure path
usb: gadget: f_uac1_legacy: validate control request size
usb: ulpi: fix double free in ulpi_register_interface() error path
usb: misc: usbio: Fix URB memory leak on submit failure
USB: core: add NO_LPM quirk for Razer Kiyo Pro webcam
usb: cdns3: gadget: fix NULL pointer dereference in ep_queue
usb: core: phy: avoid double use of 'usb3-phy'
USB: serial: option: add MeiG Smart SRM825WN
usb: gadget: f_rndis: Fix net_device lifecycle with device_move
usb: gadget: f_subset: Fix net_device lifecycle with device_move
usb: gadget: f_eem: Fix net_device lifecycle with device_move
usb: gadget: f_ecm: Fix net_device lifecycle with device_move
usb: gadget: u_ncm: Add kernel-doc comments for struct f_ncm_opts
usb: gadget: f_rndis: Protect RNDIS options with mutex
usb: gadget: f_subset: Fix unbalanced refcnt in geth_free
dt-bindings: connector: add pd-disable dependency
...
EXPECT_EQ() expands to multiple lines, breaking up one-line if
statements. This issue was not present in the patch on the mailing list
but was instead introduced by the maintainer when attempting to fix up
checkpatch warnings. Add braces around EXPECT_EQ() to avoid the error
even though checkpatch suggests them to be removed:
validate_v_ptrace.c:626:17: error: ‘else’ without a previous ‘if’
Fixes: 3789d5eecd ("selftests: riscv: verify syscalls discard vector context")
Fixes: 30eb191c89 ("selftests: riscv: verify ptrace rejects invalid vector csr inputs")
Fixes: 849f05ae1e ("selftests: riscv: verify ptrace accepts valid vector csr values")
Signed-off-by: Charlie Jenkins <thecharlesjenkins@gmail.com>
Reviewed-and-tested-by: Sergey Matyukevich <geomatsi@gmail.com>
Link: https://patch.msgid.link/20260309-fix_selftests-v2-2-9d5a553a531e@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
In set_tagged_addr_ctrl(), when PR_TAGGED_ADDR_ENABLE is not set, pmlen
is correctly set to 0, but it forgets to reset pmm. This results in the
CPU pmm state not corresponding to the software pmlen state.
Fix this by resetting pmm along with pmlen.
Fixes: 2e17430858 ("riscv: Add support for the tagged address ABI")
Signed-off-by: Zishun Yi <vulab@iscas.ac.cn>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://patch.msgid.link/20260322160022.21908-1-vulab@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Similar as commit 284922f4c5 ("x86: uaccess: don't use runtime-const
rewriting in modules") does, make riscv's runtime const not usable by
modules too, to "make sure this doesn't get forgotten the next time
somebody wants to do runtime constant optimizations". The reason is
well explained in the above commit: "The runtime-const infrastructure
was never designed to handle the modular case, because the constant
fixup is only done at boot time for core kernel code."
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20260221023731.3476-1-jszhang@kernel.org
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Fix several bugs in the RISC-V kgdb implementation:
- The element of dbg_reg_def[] that is supposed to pertain to the S1
register embeds instead the struct pt_regs offset of the A1
register. Fix this to use the S1 register offset in struct pt_regs.
- The sleeping_thread_to_gdb_regs() function copies the value of the
S10 register into the gdb_regs[] array element meant for the S9
register, and copies the value of the S11 register into the array
element meant for the S10 register. It also neglects to copy the
value of the S11 register. Fix all of these issues.
Fixes: fe89bd2be8 ("riscv: Add KGDB support")
Cc: Vincent Chen <vincent.chen@sifive.com>
Link: https://patch.msgid.link/fde376f8-bcfd-bfe4-e467-07d8f7608d05@kernel.org
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Pull input fixes from Dmitry Torokhov:
- new IDs for BETOP BTP-KP50B/C and Razer Wolverine V3 Pro added to
xpad controller driver
- another quirk for new TUXEDO InfinityBook added to i8042
- a small fixup for Synaptics RMI4 driver to properly unlock mutex when
encountering an error in F54
- an update to bcm5974 touch controller driver to reliably switch into
wellspring mode
* tag 'input-for-v7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: xpad - add support for BETOP BTP-KP50B/C controller's wireless mode
Input: xpad - add support for Razer Wolverine V3 Pro
Input: synaptics-rmi4 - fix a locking bug in an error path
Input: i8042 - add TUXEDO InfinityBook Max 16 Gen10 AMD to i8042 quirk table
Input: bcm5974 - recover from failed mode switch
Move all resource allocation operations before actually enabling the
clock, as those operations don't require the GPU to be powered on.
This is a preparation for runtime PM support. The next commit will
move all code related to powering on and initiating the GPU into the
runtime PM resume callback and all resource allocation will happen
before resume().
Reviewed-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260331-v3d-power-management-v9-2-f52ff87bfd36@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
In previous patch "Documentation: clarify the mandatory and desirable
info for security reports" I left two typos that I didn't detect in local
checks. One is "get_maintainers.pl" (no 's' in the script name), and the
other one is a missing closing quote after "Reported-by", which didn't
have effect here but I don't know if it can break rendering elsewhere
(e.g. on the public HTML page). Better fix it before it gets merged.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260404082033.5160-1-w@1wt.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull s390 fixes from Vasily Gorbik:
- Fix a memory leak in the zcrypt driver where the AP message buffer
for clear key RSA requests was allocated twice, once by the caller
and again locally, causing the first allocation to never be freed
- Fix the cpum_sf perf sampling rate overflow adjustment to clamp the
recalculated rate to the hardware maximum, preventing exceptions on
heavily loaded systems running with HZ=1000
* tag 's390-7.0-7' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: Fix memory leak with CCA cards used as accelerator
s390/cpum_sf: Cap sampling rate to prevent lsctl exception
Pull hwmon fixes from Guenter Roeck:
- Fix temperature sensor for PRIME X670E-PRO WIFI
- occ: Add missing newline, and fix potential division by zero
- pmbus:
- Fix device ID comparison and printing in tps53676_identify()
- Add missing MODULE_IMPORT_NS("PMBUS") for ltc4286
- Check return value of page-select write in pxe1610 probe
- Fix array access with zero-length block tps53679 read
* tag 'hwmon-for-v7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (asus-ec-sensors) Fix T_Sensor for PRIME X670E-PRO WIFI
hwmon: (occ) Fix missing newline in occ_show_extended()
hwmon: (occ) Fix division by zero in occ_show_power_1()
hwmon: (tps53679) Fix device ID comparison and printing in tps53676_identify()
hwmon: (ltc4286) Add missing MODULE_IMPORT_NS("PMBUS")
hwmon: (pxe1610) Check return value of page-select write in probe
hwmon: (tps53679) Fix array access with zero-length block read
Pull sched_ext fixes from Tejun Heo:
"These are late but both fix subtle yet critical problems and the blast
radius is limited strictly to sched_ext.
- Fix stale direct dispatch state in ddsp_dsq_id which can cause
spurious warnings in mark_direct_dispatch() on task wakeup
- Fix is_bpf_migration_disabled() false negative on non-PREEMPT_RCU
configs which can lead to incorrectly dispatching migration-
disabled tasks to remote CPUs"
* tag 'sched_ext-for-7.0-rc6-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Fix stale direct dispatch state in ddsp_dsq_id
sched_ext: Fix is_bpf_migration_disabled() false negative on non-PREEMPT_RCU
