mirrors/linux
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2026-04-15 16:33:33 -04:00
Code Issues Packages Projects Releases Wiki Activity
1,351,148 Commits 2 Branches 927 Tags
db1fefec31e79e59459c2c14fe4d42e303ef8ba3
Commit Graph

1351148 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Jimmy Hon
db1fefec31 arm64: dts: rockchip: Enable bluetooth of AP6611s on OrangePI5 Max/Ultra 
Orange Pi 5 Max and Ultra has onboard AP6611s with Bluetooth 5.3
connected via UART7.

The chip reports as:
[    3.747864] Bluetooth: hci0: BCM: chip id 3
[    3.750021] Bluetooth: hci0: BCM: features 0x0f
[    3.775923] Bluetooth: hci0: SYN43711A0
[    3.775930] Bluetooth: hci0: BCM (001.001.030) build 0000

Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Link: https://lore.kernel.org/r/20250427182019.1862-1-honyuenkwun@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-05-01 12:36:02 +02:00
Nicolas Frattaroli
24d8127d80 arm64: dts: rockchip: add SATA nodes to RK3576 
The Rockchip RK3576 features two SATA nodes. The first, sata0, is behind
combphy0, which muxes between pcie0 and sata0.

The second, sata1, is behind combphy1, which muxes between pcie1, sata1
and usb_drd1_dwc3.

I've only been able to test sata0 on my board, but it appears to work
just fine.

Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250424-rk3576-sata-v1-2-23ee89c939fe@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-29 23:24:43 +02:00
Diederik de Haas
425af91c58 arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3588-rock-5b 
The Radxa Rock 5B component placement document identifies the SPI Nor
Flash chip as 'U4300' which is described on page 25 of the Schematic
v1.45. There we can see that the VCC connector is connected to the
VCC_3V3_S3 power source.

This fixes the following warning:

  spi-nor spi5.0: supply vcc not found, using dummy regulator

Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250425092601.56549-5-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-28 14:10:20 +02:00
Diederik de Haas
2c99a9ce2c arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3566-pinetab2 
As described on page 37 of PineTab2 Schematic-20230417, the SPI Flash's
VCC connector is connected to VCCIO_FLASH and according to page 6 of
that same schematic, that belongs to the VCC_1V8 power source.

This fixes the following warning:

  spi-nor spi4.0: supply vcc not found, using dummy regulator

Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250425092601.56549-4-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-28 14:10:20 +02:00
Diederik de Haas
b7b045de0b arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3399-rockpro64 
As described on page 16 of the RockPro64 schematics for both v2.0 and
v2.1, the SPI Flash's VCC connector is connected to the VCC_3V0 power
source.

This fixes the following warning:

  spi-nor spi1.0: supply vcc not found, using dummy regulator

Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250425092601.56549-3-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-28 14:10:20 +02:00
Diederik de Haas
2339bc6b42 arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3328-rock64 
As described on page 6 of the Rock64 schematics for both v2.0 and v3.0
the SPI Flash's VCC connector is connected to the VCC_IO power source.

This fixes the following warning:

  spi-nor spi0.0: supply vcc not found, using dummy regulator

Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250425092601.56549-2-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-28 14:10:20 +02:00
Markus Reichl
b0657f9a8c arm64: dts: rockchip: Add vcc supply to spi flash on rk3399-roc-pc 
Add vcc supply to the spi-nor flash chip on rk3399-roc-pc boards
according to the board schematics ROC-3399-PC-V10-A-20180804 to avoid
warnings in dmesg output.

Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
Link: https://lore.kernel.org/r/20250411140223.1069-1-m.reichl@fivetechno.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-28 14:10:19 +02:00
Nicolas Frattaroli
34b69113ab arm64: dts: rockchip: enable pcie on Sige5 
The ArmSoM Sige5 board exposes PCIe controller 0 on its M.2 slot on the
bottom of the board. Enable the necessary nodes for it, and also add the
correct pins for both the power enable GPIO and the PCIe reset GPIO.

Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250414-rk3576-sige5-pcie-v1-1-0e950a96f392@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-28 14:10:19 +02:00
Heiko Stuebner
b022a48d8d arm64: dts: rockchip: Add HDMI support for roc-rk3576-pc 
Enable HDMI and VOP nodes for the roc-rk3576-pc board.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250414183745.1352470-1-heiko@sntech.de
 2025-04-28 14:10:19 +02:00
Chris Morgan
f50181bb03 arm64: dts: rockchip: Enable HDMI0 audio output for Indiedroid Nova 
Make available HDMI audio for the HDMI0 port.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20250415174711.72891-1-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-28 14:10:19 +02:00
Chaoyi Chen
2acfe31a8c arm64: dts: rockchip: Add rk3588 evb2 board 
General features for rk3588 evb2 board:
- Rockchip RK3588
- LPDDR4/4X
- eMMC5.1
- RK806-2x2pcs + DiscretePower
- 1x HDMI2.1 TX / HDMI2.0 RX
- 1x full size DisplayPort
- 3x USB3.0 Host
- 1x USB2.0 Host
- WIFI/BT

Tested with HDMI/GPU/USB2.0/USB3.0/WIFI module.

Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Link: https://lore.kernel.org/r/20250418014757.336-3-kernel@airkyi.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-28 14:10:19 +02:00
Chaoyi Chen
b3610f2090 dt-bindings: arm: rockchip: Add rk3588 evb2 board 
Add devicetree binding for the rk3588 evb2 board.

Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250418014757.336-2-kernel@airkyi.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-28 14:10:19 +02:00
Shawn Lin
faebc6375b arm64: dts: rockchip: Add pcie1 slot for rk3576 evb1 board 
PCIe1 and usb_drd1_dwc3 is sharing the same PHY on RK3576 platform.
For pcie1 slot and USB interface, there is a swich IC labelled as
Dial_Switch_1 on evb1 board. If we need to make pcie1 slot work for this
board, we should first disable usb_drd1_dwc3 and then set Dial_Switch_1
to low state.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://lore.kernel.org/r/1745371359-30443-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-28 14:10:19 +02:00
Andy Yan
281bc0c595 arm64: dts: rockchip: Enable eDP display for Cool Pi GenBook 
Cool Pi CM5 GenBook equipped with a 1080P eDP panel, the panel
connected on board with 30/40 pin connector.

There is no hpd hooked up on the board, so we need to set
hpd-absent-delay-ms in dts.

Signed-off-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20250426071554.1305042-2-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-28 14:10:19 +02:00
Andy Yan
a481bb0b1a arm64: dts: rockchip: Add eDP1 dt node for rk3588 
Add eDP1 dt node for RK3588 SoC

Signed-off-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20250426071554.1305042-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-28 14:10:19 +02:00
Jacobe Zang
932bcd2131 arm64: dts: rockchip: enable HDMI out audio on Khadas Edge2 
Enable HDMI out audio on the Khadas Edge2.

Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com>
Link: https://lore.kernel.org/r/20250424-edge-v1-3-314aad01d9ab@wesion.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-28 14:10:19 +02:00
Jacobe Zang
169f17bbbe arm64: dts: rockchip: Add HDMI & VOP2 to Khadas Edge2 
Enable HDMI display output on Khadas Edge2.

Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com>
Link: https://lore.kernel.org/r/20250424-edge-v1-2-314aad01d9ab@wesion.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-28 14:10:18 +02:00
Jacobe Zang
8454ad4e4a arm64: dts: rockchip: Add bluetooth support to Khadas Edge2 
This commit adds the RTS signal, specifies the compatible Broadcom chip,
its clock source, interrupts, GPIOs for wakeup and shutdown, maximum speed,
pinctrl settings, and power supplies.

Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com>
Link: https://lore.kernel.org/r/20250424-edge-v1-1-314aad01d9ab@wesion.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-28 14:10:18 +02:00
Heiko Stuebner
777055e02f arm64: dts: rockchip: add overlay for tiger-haikou video-demo adapter 
This adds support for the video-demo-adapter DEVKIT ADDON CAM-TS-A01
(https://embedded.cherry.de/product/development-kit/) for the Haikou
devkit with Tiger RK3588 SoM.

The Video Demo adapter is an adapter connected to the fake PCIe slot
labeled "Video Connector" on the Haikou devkit.

It's main feature is a Leadtek DSI-display with touchscreen and a camera
(that is not supported yet). To drive these components a number of
additional regulators are grouped on the adapter as well as a PCA9670
gpio-expander to provide the needed additional gpio-lines.

Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Dragan Simic <dsimic@manjaro.org> # Makefile
Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250226140942.3825223-4-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-28 14:10:18 +02:00
Heiko Stuebner
0d0947766d arm64: dts: rockchip: add dsi controller nodes on rk3588 
The RK3588 comes with two DSI2 controllers based on a new Synopsis IP.
Add the necessary nodes for them.

Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> # RK3588 EVB1
Link: https://lore.kernel.org/r/20250226140942.3825223-3-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-26 19:48:23 +02:00
Heiko Stuebner
2e177b8554 arm64: dts: rockchip: add mipi dcphy nodes to rk3588 
Add the two MIPI-DC-phy nodes to the RK3588, that will be used by the
DSI2 controllers and hopefully in some future also for camera input.

Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> # RK3588 EVB1
Link: https://lore.kernel.org/r/20250226140942.3825223-2-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-26 19:48:23 +02:00
Kever Yang
d4b9fc2af4 arm64: dts: rockchip: Add rk3576 pcie nodes 
rk3576 has two pcie controllers, both are pcie2x1 work with
naneng-combphy.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Shawn Lin <Shawn.lin@rock-chips.com>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250414145110.11275-3-kever.yang@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-22 13:34:11 +02:00
Andy Yan
abfe411af8 arm64: dts: rockchip: Enable HDMI audio outputs for Cool Pi CM5 EVB 
Enable audio outputs for two HDMI ports on Cool Pi CM5 EVB

Signed-off-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20250419121326.388298-3-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-22 13:30:37 +02:00
Andy Yan
85e3fd3720 arm64: dts: rockchip: Enable HDMI1 on Cool Pi CM5 EVB 
Enable the second HDMI output port on Cool Pi CM5 EVB

Signed-off-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20250419121326.388298-2-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-22 13:30:37 +02:00
Andy Yan
9968516246 arm64: dts: rockchip: Rename hdmi-con to hdmi0-con for Cool Pi CM5 EVB 
There are two hdmi connector on Cool Pi CM5 EVB, the current supported
is hdmi0, assign corresponding index to it. It will be convenient for
us to add support for another one.

Signed-off-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20250419121326.388298-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-22 13:30:37 +02:00
Damon Ding
53862b991e arm64: dts: rockchip: Enable eDP0 display on RK3588S EVB1 board 
Add the necessary DT changes to enable eDP0 on RK3588S EVB1 board:
- Set pinctrl of pwm12 for backlight
- Enable edp0/hdptxphy0/vp2
- Assign the parent of DCLK_VOP2_SRC to PLL_V0PLL
- Add aux-bus/panel nodes

For RK3588, the PLL_V0PLL is specifically designed for the VOP2. This
means the clock rate of PLL_V0PLL can be adjusted according to the dclk
rate of relevant VP. It is typically assigned as the dclk source of a
specific VP when the clock of relevant display mode is unusual, such as
the eDP panel 'lg,lp079qx1-sp0v' paired with RK3588S EVB1, which has a
clock rate of 202.02MHz.

Additionally, the 'force-hpd' is set for edp0 because the HPD pin on the
panel side is not connected to the eDP HPD pin on the SoC side according
to the RK3588S EVB1 hardware design.

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/r/20250310104114.2608063-14-damon.ding@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-22 13:28:32 +02:00
Damon Ding
dc79d3d5e7 arm64: dts: rockchip: Add eDP0 node for RK3588 
Add support for the eDP0 output on RK3588 SoC.

Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://lore.kernel.org/r/20250310104114.2608063-13-damon.ding@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-22 13:28:32 +02:00
Chukun Pan
8ecd096d01 arm64: dts: rockchip: Move SHMEM memory to reserved memory on rk3588 
0x0 to 0xf0000000 are SDRAM memory areas where 0x10f000 is located.
So move the SHMEM memory of arm_scmi to the reserved memory node.

Fixes: c9211fa260 ("arm64: dts: rockchip: Add base DT for rk3588 SoC")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20250401090009.733771-2-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-10 14:34:52 +02:00
Chukun Pan
ab6fcb58ae arm64: dts: rockchip: Add UART DMA support for RK3528 
The UART ports on RK3528 have DMA capability, describe it.
Flow control is optional, so dma-names are not added.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20250401100020.944658-4-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-10 14:33:54 +02:00
Chukun Pan
762b1f6503 arm64: dts: rockchip: Add DMA controller for RK3528 
Add DMA controller dt node for RK3528 SoC.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20250401100020.944658-3-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-10 14:33:54 +02:00
Chukun Pan
a37d21a9b4 arm64: dts: rockchip: Add missing uart3 interrupt for RK3528 
The interrupt of uart3 node on rk3528 is missing, fix it.

Fixes: 7983e6c379 ("arm64: dts: rockchip: Add base DT for rk3528 SoC")
Reviewed-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20250401100020.944658-2-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-10 14:33:46 +02:00
Shawn Lin
cdba8e7159 arm64: dts: rockchip: Rename vcc3v3_pcie0 to vcc3v3_pcie1 for rk3576-evb1-v10 
It's for pcie1, correct the name.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://lore.kernel.org/r/1744079475-211962-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-10 14:29:09 +02:00
Quentin Schulz
200b3fa574 arm64: dts: rockchip: Enable HDMI audio output for RK3588 Tiger Haikou 
HDMI audio is available on the RK3588 Tiger Haikou HDMI TX port, so
let's enable it.

Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250317-tsd-rk3588-hdmi-audio-v1-2-0b8ceb9597a6@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-07 09:15:45 +02:00
Quentin Schulz
f46705afd1 arm64: dts: rockchip: Enable HDMI audio output for RK3588 Jaguar 
HDMI audio is available on the RK3588 Jaguar HDMI TX port, so let's
enable it.

Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250317-tsd-rk3588-hdmi-audio-v1-1-0b8ceb9597a6@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-07 09:15:45 +02:00
Jianfeng Liu
392275203a arm64: dts: rockchip: Enable HDMI ports on ArmSoM W3 
Enable the two HDMI ports on ArmSoM W3. And audio output of these two
ports are also enabled.

Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Link: https://lore.kernel.org/r/20250317163240.3083908-1-liujianfeng1994@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-07 09:15:45 +02:00
Andy Yan
b6490faab6 arm64: dts: rockchip: aliase sdhci as mmc0 for rk3566 box demo 
Follow most others rk356x based boards, and u-boot only use mmc0/1
as mmc boot targets, so aliase sdhci as mmc0.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
[demo-board only used internally by Rockchip, so changing the alias order
 does not affect public users]
Link: https://lore.kernel.org/r/20241221104920.4193034-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-07 09:15:45 +02:00
Uwe Kleine-König
d01e09a9f7 arm64: dts: rockchip: Add gmac phy reset GPIO to QNAP TS433 
While looking through the vendor U-Boot code Heiko spotted that a SoC
GPIO is connected to the ethernet phy's reset pin. Add the respective
reset-gpios property with pinmuxing for the GPIO to the phy node.

Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/49f66206fccc714a8745b9ac35247615ad5cc369.1742331667.git.ukleinek@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-07 09:15:45 +02:00
Uwe Kleine-König
831263a416 arm64: dts: rockchip: Correct gmac phy address on QNAP TS433 
The Motorcomm Phy can be talked to on mdio broadcast address 0, but the
actuall address is 3. Adapt the reg property and node name accordingly.

Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/6b8ef7e37e646f4cd399ceb2f46017644d76da9d.1742331667.git.ukleinek@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-07 09:15:45 +02:00
Marcin Juszkiewicz
c0898e6881 arm64: dts: rockchip: enable HDMI sound on FriendlyElec NanoPC-T6 
We have both video outputs showing pixels, time to play some noise.

Signed-off-by: Marcin Juszkiewicz <mjuszkiewicz@redhat.com>
Link: https://lore.kernel.org/r/20250325-nanopc-t6-hdmi-v1-2-299a2ed45878@redhat.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-07 09:15:45 +02:00
Marcin Juszkiewicz
fc1f5f5bca arm64: dts: rockchip: enable HDMI1 on FriendlyElec NanoPC-T6 
Time to get second video output working.

Signed-off-by: Marcin Juszkiewicz <mjuszkiewicz@redhat.com>
Link: https://lore.kernel.org/r/20250325-nanopc-t6-hdmi-v1-1-299a2ed45878@redhat.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-07 09:15:45 +02:00
Shawn Lin
530f2bebc0 arm64: dts: rockchip: Enable ufshc on rk3576 evb1 board 
RK3576 evb1 board supports UFS, so enable it.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://lore.kernel.org/r/1741180586-140422-1-git-send-email-shawn.lin@rock-chips.com
[the core device node went into the driver tree, hence this being later]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-07 09:15:44 +02:00
Heiko Stuebner
55a43c346d arm64: dts: rockchip: change rng reset id back to its constant value 
With the binding header now providing the SCMI_SRST_H_TRNG_NS constant,
switch back to it from the temporary numeric value.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
 2025-04-07 09:15:44 +02:00
Linus Torvalds
0af2f6be1b Linux 6.15-rc1 v6.15-rc1 2025-04-06 13:11:33 -07:00
Thomas Weißschuh
0efdedb335 tools/include: make uapi/linux/types.h usable from assembly 
The "real" linux/types.h UAPI header gracefully degrades to a NOOP when
included from assembly code.

Mirror this behaviour in the tools/ variant.

Test for __ASSEMBLER__ over __ASSEMBLY__ as the former is provided by the
toolchain automatically.

Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/lkml/af553c62-ca2f-4956-932c-dd6e3a126f58@sirena.org.uk/
Fixes: c9fbaa8795 ("selftests: vDSO: parse_vdso: Use UAPI headers instead of libc headers")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/20250321-uapi-consistency-v1-1-439070118dc0@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 2025-04-06 12:55:31 -07:00
Linus Torvalds
710329254d Merge tag 'turbostat-2025.05.06' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux 
Pull turbostat updates from Len Brown:

 - support up to 8192 processors

 - add cpuidle governor debug telemetry, disabled by default

 - update default output to exclude cpuidle invocation counts

 - bug fixes

* tag 'turbostat-2025.05.06' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  tools/power turbostat: v2025.05.06
  tools/power turbostat: disable "cpuidle" invocation counters, by default
  tools/power turbostat: re-factor sysfs code
  tools/power turbostat: Restore GFX sysfs fflush() call
  tools/power turbostat: Document GNR UncMHz domain convention
  tools/power turbostat: report CoreThr per measurement interval
  tools/power turbostat: Increase CPU_SUBSET_MAXCPUS to 8192
  tools/power turbostat: Add idle governor statistics reporting
  tools/power turbostat: Fix names matching
  tools/power turbostat: Allow Zero return value for some RAPL registers
  tools/power turbostat: Clustered Uncore MHz counters should honor show/hide options
 2025-04-06 12:32:43 -07:00
Linus Torvalds
59f392fa7c Merge tag 'soundwire-6.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire 
Pull soundwire fix from Vinod Koul:

 - add missing config symbol CONFIG_SND_HDA_EXT_CORE required for asoc
   driver CONFIG_SND_SOF_SOF_HDA_SDW_BPT

* tag 'soundwire-6.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  ASoC: SOF: Intel: Let SND_SOF_SOF_HDA_SDW_BPT select SND_HDA_EXT_CORE
 2025-04-06 12:04:53 -07:00
Len Brown
03e00e373c tools/power turbostat: v2025.05.06 
Support up to 8192 processors
Add cpuidle governor debug telemetry, disabled by default
Update default output to exclude cpuidle invocation counts
Bug fixes

Signed-off-by: Len Brown <len.brown@intel.com>
 2025-04-06 14:49:20 -04:00
Len Brown
ec4acd3166 tools/power turbostat: disable "cpuidle" invocation counters, by default 
Create "pct_idle" counter group, the sofware notion of residency
so it can now be singled out, independent of other counter groups.

Create "cpuidle" group, the cpuidle invocation counts.
Disable "cpuidle", by default.

Create "swidle" = "cpuidle" + "pct_idle".
Undocument "sysfs", the old name for "swidle", but keep it working
for backwards compatibilty.

Create "hwidle", all the HW idle counters

Modify "idle", enabled by default
"idle" = "hwidle" + "pct_idle" (and now excludes "cpuidle")

Signed-off-by: Len Brown <len.brown@intel.com>
 2025-04-06 14:29:57 -04:00
Linus Torvalds
dda8887894 Merge tag 'perf-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 
Pull perf event fix from Ingo Molnar:
 "Fix a perf events time accounting bug"

* tag 'perf-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix child_total_time_enabled accounting bug at task exit
 2025-04-06 10:48:12 -07:00
Linus Torvalds
302deb109d Merge tag 'sched-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 
Pull scheduler fixes from Ingo Molnar:

 - Fix a nonsensical Kconfig combination

 - Remove an unnecessary rseq-notification

* tag 'sched-urgent-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  rseq: Eliminate useless task_work on execve
  sched/isolation: Make CONFIG_CPU_ISOLATION depend on CONFIG_SMP
 2025-04-06 10:44:58 -07:00