Apple SoC device tree changes for v6.17
- Added the bindings and nodes for Apple SoC GPU. The driver itself
isn't ready for upstreaming yet due to rust dependencies but we're
confident that the bindings are stable at this point.
- Added a missing node for the touchbar framebuffer to Apple T2 device
trees, which is the BMC for some x86 Macs
- Fixed a W=1 warning by adding bit offsets to NVMEM node names. This
required a change to the generic NVMEM cell binding which will be part
of 6.17 through the NVMEM tree.
Signed-off-by: Sven Peter <sven@kernel.org>
* tag 'apple-soc-dt-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux:
arm64: dts: apple: Add Apple SoC GPU
dt-bindings: gpu: Add Apple SoC GPU
arm64: dts: apple: t8012-j132: Include touchbar framebuffer node
arm64: dts: apple: Add bit offset to PMIC NVMEM node names
Link: https://lore.kernel.org/r/20250722163258.62424-2-sven@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
T-HEAD Devicetrees for v6.17
There are several additions for the T-Head TH1520 SoC:
- Add PVT node for thermal sensor which works with the existing Moortec
MR75203 driver.
- Add "gpu-clkgen" reset property to the AON node which allows the power
domain driver to detect the capability to power sequence the GPU.
All of these patches have been tested in linux-next.
Signed-off-by: Drew Fustini <fustini@kernel.org>
* tag 'thead-dt-for-v6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/fustini/linux:
riscv: dts: thead: Add PVT node
riscv: dts: thead: th1520: Add GPU clkgen reset to AON node
Link: https://lore.kernel.org/r/aHtnwthmTpfkIBMr@x1
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New board: FriendlyElec NanoPi M5
Camera support for the PinePhone Pro.
A bunch of cleanups to make DTC happier, fix ordering of DMA uart
channels on rk3528 and some video output enablement as well as some
button definitions.
An interesting tidbit is the reset behaviour addition in that some
boards have specific requirements as to how the PMIC needs to do the
restart. DT-maintainers did not consider the header with helper-constants
as part of the binding, so that header ended up in the Rockchip directory
* tag 'v6.17-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (29 commits)
arm64: dts: rockchip: Add maskrom button to NanoPi R5S + R5C
arm64: dts: rockchip: Drop regulator-compatible property on rk3399
arm64: dts: rockchip: Drop unneeded address+size-cells on px30
arm64: dts: rockchip: Fix LCD panel port on rk3566-pinetab2
arm64: dts: rockchip: Move mipi_out node on rk3399 haikou demo dtso
arm64: dts: rockchip: Simplify mipi_out endpoint on rk3399 RP64 dtso
arm64: dts: rockchip: Simplify edp endpoints on several rk3399 boards
arm64: dts: rockchip: Simplify VOP port definition on rk3328
arm64: dts: rockchip: Move dsi address+size-cells from SoC to rk3399 boards
arm64: dts: rockchip: Move dsi address+size-cells from SoC to px30 boards
arm64: dts: rockchip: Fix UART DMA support for RK3528
arm64: dts: rockchip: Add reset button to NanoPi R5S
arm64: dts: rockchip: Add rtc0 alias for NanoPi R5S + R5C
arm64: dts: rockchip: describe the OV8858 user camera on PinePhone Pro
arm64: dts: rockchip: describe I2c Bus 1 and IMX258 world camera on PinePhone Pro
arm64: dts: rockchip: Fix pinctrl node names for RK3528
arm64: dts: rockchip: Add FriendlyElec NanoPi M5 support
dt-bindings: arm: rockchip: add FriendlyElec NanoPi M5 board
arm64: dts: rockchip: force PMIC reset behavior to restart PMU on RK3588 Tiger
arm64: dts: rockchip: force PMIC reset behavior to restart PMU on RK3588 Jaguar
...
Link: https://lore.kernel.org/r/11552292.NyiUUSuA9g@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm Arm64 DeviceTree updates for v6.17
79b896e7da arm64: dts: qcom: msm8976-longcheer-l9360: Add initial device tree
6516961352 arm64: dts: qcom: Add support for X1-based Asus Zenbook A14
The DB410c D3 camera mezzanine is converted to an overlay.
On MSM8976 SDC2 pinctrl definitions are introduced and BLSP DMA
controller is marked to be managed by another entity.
Add camera subsystem on the QCM2290 platform.
Add and enable remoteproc and related devices on QCS615.
Add and enable Video encoder/decoder on QCS8300 and SA8775P.
Also on SA8775P add CPU OPP tables for scaling DDR/L3 bandwidth based on
CPU frequency, add L3 interconnect definitions, DSI and video
encoder/decoder support.
Enable the SLPI remoteproc on SDM850-based Lenovo Yoga C630.
On SM6350, add the video clock controller, APR and some audio related
services.
Describe the camera subsystem on SM8550 and add Iris video
encoder/decoder node for SM8650.
On SM8750 introduce UFS and Soundwire support, enable these and describe
the sound hardware on MTP and QRD.
Add camera clock controller on SC8180X.
On X Elite, for the Dell XPS13, add WiFi and Bluetooth pwrseq and enable
the fingerprint sensor. For HP Omnibook X14 USB1 SS1 SBU mux and do
some misc cleanup.
Replace the thermal zones inherited from X Elite with X Plus-specific
ones.
Add missing interrupts and clean up unrelated clocks for PCIe
controllers across a variety of platforms.
* tag 'qcom-arm64-for-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (67 commits)
arm64: dts: qcom: sm8150: Drop unrelated clocks from PCIe hosts
arm64: dts: qcom: sc8180x: Drop unrelated clocks from PCIe hosts
arm64: dts: qcom: x1-asus-zenbook: support sound
arm64: dts: qcom: x1-asus-zenbook: fixup GPU nodes
arm64: dts: qcom: sm6115: add debug UART pins
arm64: dts: qcom: sm8650: add iris DT node
arm64: dts: qcom: msm8976-longcheer-l9360: Add initial device tree
arm64: dts: qcom: msm8976: Add sdc2 GPIOs
dt-bindings: arm: qcom: Add MSM8976 BQ Aquaris X5 Plus
arm64: dts: qcom: msm8976: Make blsp_dma controlled-remotely
arm64: dts: qcom: sa8775p: Correct the interrupt for remoteproc
arm64: dts: qcom: sm8550: Add support for camss
arm64: dts: qcom: qcs615: disable the CTI device of the camera block
arm64: dts: qcom: qcs615-ride: enable remoteprocs
arm64: dts: qcom: qcs615: add ADSP and CDSP nodes
arm64: dts: qcom: qcs615: Add IMEM and PIL info region
arm64: dts: qcom: qcs615: Add mproc node for SEMP2P
arm64: dts: qcom: Add support for X1-based Asus Zenbook A14
arm64: dts: qcom: sc7180: Expand IMEM region
arm64: dts: qcom: sdm845: Expand IMEM region
...
Link: https://lore.kernel.org/r/20250716031059.76348-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Allwinner device tree changes for 6.17
This branch includes a change shared with the clk tree for adding
the missing PPU0 reset on the A523.
The PM domain DT binding immutable branch is also included, which
brings in v6.16-rc2, as well as PM domain bindings for other platforms.
Other changes include:
- RGB666 LCD pin definitions for the V3s PE pins and V3 PD pins
- node order fixes for the A523 dtsi
- UART1 pin definitions for A523
- Allwinner board DT binding cleanup
- EMAC support on A100/A133
- Enabled on the Liontron H-A133L board
- SID efuse, power controllers and GPU added for A523
- A523 GPU enabled on all existing boards
New boards:
- Xunlong OrangePi 4A with the Allwinner T527 SoC.
* tag 'sunxi-dt-for-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (21 commits)
arm64: dts: allwinner: a523: enable Mali GPU for all boards
arm64: dts: allwinner: a523: add Mali GPU node
arm64: dts: allwinner: a523: Add power controller device nodes
dt-bindings: power: Add A523 PPU and PCK600 power controllers
arm64: dts: allwinner: A523: Add SID controller node
arm64: dts: allwinner: a133-liontron-h-a133l: Add Ethernet support
arm64: dts: allwinner: a100: Add EMAC support
arm64: dts: allwinner: a100: Add pin definitions for RGMII/RMII
dt-bindings: arm: sunxi: Combine board variants into enums
dt-bindings: power: qcom,rpmpd: document the Milos RPMh Power Domains
arm64: dts: allwinner: t527: Add OrangePi 4A board
arm64: dts: allwinner: a523: Add UART1 pins
arm64: dts: allwinner: a523: Move rgmii0 pins to correct location
arm64: dts: allwinner: a523: Move mmc nodes to correct position
dt-bindings: arm: sunxi: Add Xunlong OrangePi 4A board
ARM: dts: sun8i: v3: Add RGB666 LCD PD pins definition
ARM: dts: sun8i: v3s: Add RGB666 LCD PE pins definition
dt-bindings: reset: sun55i-a523-r-ccu: Add missing PPU0 reset
dt-bindings: firmware: thead,th1520: Add resets for GPU clkgen
dt-bindings: rockchip: pmu: Add compatible for RK3528
...
Link: https://lore.kernel.org/r/aHaQFe3Lr8Qzyb1M@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm Arm32 DeviceTree updates for v6.17
Add aliases for MMC controllers on MSM8974, enable USB charging on the
Sony Xperia Rhine platform and add new DeviceTree for the Sony Xperia Z
Ultra device.
Tidy up interrupts specifiers on MSM8960, by using macro constants.
* tag 'qcom-arm32-for-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: msm8974-sony-xperia-rhine: Add alias for mmc0 & mmc1
ARM: dts: qcom: msm8974-hammerhead: Add alias for mmc0
ARM: dts: qcom: msm8974-oneplus-bacon: Add alias for mmc0
ARM: dts: qcom: Add initial support for Sony Xperia Z Ultra (togari)
dt-bindings: arm: qcom: Add Sony Xperia Z Ultra (togari)
ARM: dts: qcom: msm8974-sony-xperia-rhine: Move camera buttons to amami & honami
ARM: dts: qcom: msm8974-sony-xperia-rhine: Enable USB charging
ARM: dts: qcom: msm8960: use macros for interrupts
ARM: dts: qcom: Align wifi node name with bindings
Link: https://lore.kernel.org/r/20250715021838.14751-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX ARM device tree changes for 6.17:
- New device trees for Engicam MicroGEA-MX6UL and i.MX28 Amarula board
- A couple of changes from Bence Csókás to replace license text comment
with SPDX identifier for Karo and Gateworks boards
- A couple of imx7s-warp updates from Fabio Estevam to improve Bluetooth
and Wifi description
- A set of dt-schema fixes for VF610 based boards from Frank Li
- A couple of imx6ul-kontron-sl-common changes to add SPI NOR partitions
and correct QSPI NAND node name
- A few other random improvements
* tag 'imx-dt-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (21 commits)
ARM: dts: imx6-gw: Replace license text comment with SPDX identifier
ARM: dts: imx6ul-kontron-sl-common: Fix QSPI NAND node name
ARM: dts: imx6ul-kontron-sl-common: Add SPI NOR partitions
ARM: dts: imx6ul-kontron-bl-common: Fix RTS polarity for RS485 interface
ARM: dts: imx6-karo: Replace license text comment with SPDX identifier
ARM: dts: imx6ul: support Engicam MicroGEA GTW board
ARM: dts: imx6ul: support Engicam MicroGEA RMM board
ARM: dts: imx6ul: support Engicam MicroGEA BMM board
ARM: dts: imx6ul: support Engicam MicroGEA-MX6UL SoM
ARM: dts: mxs: support i.MX28 Amarula rmm board
ARM: dts: imx28: add pwm7 muxing options
ARM: dts: vf: vf610-zii-cfu1: rename node name *-gpio to *-gpios
ARM: dts: vf: vf-colibri-eval-v3: add power-supply for edt,et057090dhu
ARM: dts: vf: rename io-expander@20 to pinctrl@20
ARM: dts: vf: remove redundant layer under iomux
ARM: dts: vf: remove redundant pinctrl-names
ARM: dts: vf: remove reg property for arm pmu
ARM: dts: vfxxx: Correctly use two tuples for timer address
ARM: dts: add ngpios for vf610 compatible gpio controllers
ARM: dts: imx7s-warp: Improve the Wifi description
...
Link: https://lore.kernel.org/r/20250713055441.221235-3-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX arm64 device tree changes for 6.17:
- New board support: GOcontroll Moduline based devices, phyCORE-i.MX 95
Plus FPSC SoM and base boards, i.MX93 phycore overlays
- A few i.MX8M changes from Adam Ford to add DMA configuration for
UART2, set up VPU clocks for nominal and overdrive mode, improve
HS400 USDHC clock speed
- Several sets of changes from Alexander Stein to add EASRC support for
tqma8mnql and tqma8mpql board, add missing DMA entries for I2C & LPUART
on ls1043a and ls1046a, enable SFP interface for tqmls1043a and
tqmls1046a, etc.
- A series from Clark Wang to improve Ethernet support for i.MX93,
removing eee-broken-1000t for eqos node, reducing the driving strength
of net RXC/TXC, etc.
- A few i.MX95 and i.MX8Q changes from Frank Li to add missing devices
for EVK board and enable camera support
- A couple of changes from Laurentiu Mihalcea to support WM8962 audio
codec for imx8qxp-mek and imx8qm-mek board
- A number of changes from Shengjiu Wang to improve various audio
support for imx943-evk and imx8mp-evk
- A series from Tim Harvey to increase HS400 USDHC clock speed for
Gateworks i.MX8M Venice devices
- Many other random improvements and cleanups on various boards
* tag 'imx-dt64-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (85 commits)
arm64: dts: imx8q: add camera ov5640 support for imx8qm-mek and imx8qxp-mek
arm64: dts: freescale: imx8mp-toradex-smarc: remove gpio hog
arm64: dts: freescale: imx8mp-toradex-smarc: fix lvds dsi mux gpio
arm64: dts: imx8mm-venice-gw7904: Increase HS400 USDHC clock speed
arm64: dts: imx8mm-venice-gw7903: Increase HS400 USDHC clock speed
arm64: dts: imx8mn-venice-gw7902: Increase HS400 USDHC clock speed
arm64: dts: imx8mm-venice-gw7902: Increase HS400 USDHC clock speed
arm64: dts: imx8mm-venice-gw7901: Increase HS400 USDHC clock speed
arm64: dts: imx8mp-venice-gw702x: Increase HS400 USDHC clock speed
arm64: dts: imx8mm-venice-gw700x: Increase HS400 USDHC clock speed
arm64: dts: lx2160a-qds: add the two on-board RGMII PHYs
arm64: dts: add imx95-libra-rdk-fpsc board
arm64: dts: imx8q: add linux,cma node for imx8qm-mek and imx8qxp-mek
arm64: dts: imx8: add capture controller for i.MX8's img subsystem
arm64: dts: imx95: add jpeg encode and decode nodes
arm64: dts: imx93-phyboard-nash: Add PEB-WLBT-07 overlay
arm64: dts: imx93-phyboard-segin: Add PEB-WLBT-05 overlay
arm64: dts: imx93-phyboard-segin: Add PEB-EVAL-01 overlay
arm64: dts: imx93-phycore-som: Add RPMsg overlay
arm64: dts: freescale: tqmls10xx: Add vdd-supply for spi-nor flash
...
Link: https://lore.kernel.org/r/20250713055441.221235-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
dt-bindings: Updates for v6.17-rc1
Add Tegra264 compatible strings for some core components and extend
bindings where necessary to accomodate the new hardware generation. Also
document some new platforms, for both old and new chips.
* tag 'tegra-for-6.17-dt-bindings' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: arm: tegra: Add Asus Portable AiO P1801-T
dt-bindings: arm: tegra: Add Asus VivoTab RT TF600T
dt-bindings: Add Tegra264 clock and reset definitions
dt-bindings: tegra: Document P3971-0089+P3834-0008 Platform
dt-bindings: rtc: tegra: Document Tegra264 RTC
dt-bindings: dma: Add Tegra264 compatible string
dt-bindings: misc: Document Tegra264 APBMISC compatible
dt-bindings: firmware: Document Tegra264 BPMP
dt-bindings: mailbox: tegra-hsp: Properly sort compatible string list
dt-bindings: mailbox: tegra-hsp: Bump number of shared interrupts
dt-bindings: tegra: pmc: Add Tegra264 compatible
dt-bindings: memory: tegra: Add Tegra264 support
Link: https://lore.kernel.org/r/20250711220943.2389322-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Now that the dt-binding has been extended to allow indicating the bit
position the following warning about a duplicate unit address with W=1
can be fixed:
arch/arm64/boot/dts/apple/t8103.dtsi:764.46-767.8: Warning (unique_unit_address_if_enabled): /soc/spmi@23d0d9300/pmic@f/nvmem-layout/boot-error-count@9f02: duplicate unit-address (also used in node /soc/spmi@23d0d9300/pmic@f/nvmem-layout/panic-count@9f02)
Fixes: d8bf82081c ("arm64: dts: apple: Add PMIC NVMEM")
Link: https://lore.kernel.org/r/20250610-nvmem-bit-pattern-v1-2-55ed5c1b369c@kernel.org
Signed-off-by: Sven Peter <sven@kernel.org>
MediaTek mach ARM32 updates
This adds support for the MediaTek MT6572 SoC, found in various
old smartphones and tablets from various manufacturers.
In particular, this adds a board_dt_compat entry for this SoC
and its SMP bring up sequence to enable secondary cores.
* tag 'mtk-dts32-for-v6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
ARM: dts: mediatek: add basic support for Lenovo A369i board
ARM: dts: mediatek: add basic support for JTY D101 board
ARM: dts: mediatek: add basic support for MT6572 SoC
dt-bindings: arm: mediatek: add boards based on the MT6572 SoC
dt-bindings: vendor-prefixes: add JTY
dt-bindings: watchdog: mediatek,mtk-wdt: add MT6572
dt-bindings: interrupt-controller: mediatek,mt6577-sysirq: add MT6572
Link: https://lore.kernel.org/r/20250711083656.33538-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
STM32 DT for v6.17, round 1
Highlights:
----------
- MPU:
- STM32MP13:
-Add Ethernet MAC adress efuse support.
- STMP32MP15:
- Add stm32mp157f-DK2 board support. This board embedds the same
conectivity devices, DDR ... than stm32mp157c-dk2.
However there are two differences: STM32MP157F SoC which allows
overdrive OPP and the SCMI support for system features like
clocks and regulators.
- STM32MP25:
- Fix tick timer for low power use cases.
- Add timer support.
* tag 'stm32-dt-for-v6.17-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
arm64: dts: st: remove empty line in stm32mp251.dtsi
arm64: dts: st: fix timer used for ticks
arm64: defconfig: Enable STM32 Octo Memory Manager and OcstoSPI driver
ARM: dts: stm32: add stm32mp157f-dk2 board support
dt-bindings: arm: stm32: add STM32MP157F-DK2 board compatible
ARM: dts: stm32: optee async notif interrupt for MP15 scmi variants
ARM: dts: stm32: use internal regulators bindings for MP15 scmi variants
dt-bindings: regulator: Add STM32MP15 SCMI regulator identifiers
ARM: dts: stm32: use 'typec' generic name for stusb1600 on stm32mp15xx-dkx
ARM: dts: stm32: fullfill diversity with OPP for STM32M15xF SOCs
ARM: dts: stm32: add system-clock-direction-out on stm32mp15xx-dkx
arm64: defconfig: enable STM32 timers drivers
arm64: dts: st: add timer nodes on stm32mp257f-ev1
arm64: dts: st: add timer pins for stm32mp257f-ev1
arm64: dts: st: add timer nodes on stm32mp251
ARM: dts: stm32: Add nvmem-cells to ethernet nodes for constant mac-addresses
Link: https://lore.kernel.org/r/b3e3363b-1ea5-457c-b244-2cbe26f7d6e4@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New boards: ROC-RK3588S-PC, Luckfox Omni3576, Radxa Rock 5T,
Sakura Pi RK3308B - all of them have the used soc in their name.
New overlays: RockPro64 screen, optional Sige5 Wifi/BT module,
ethernet-switch addon for Jaguar.
Added peripherals on rk3528 (spi, power-domain controller, gpu)
and sdio controller on rk3576.
DSI display support for the Gameforce-ACE handheld, a fix for the
cover-detection (closed/open) on the PineNote, camera support for
the Haikou Video Demo overlay on PX30 Ringneck as well as a number
of other newly enabled peripherals on a number of boards.
* tag 'v6.17-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (40 commits)
arm64: dts: rockchip: Enable eMMC HS200 mode on Radxa E20C
arm64: dts: rockchip: Add bluetooth support to ArmSoM Sige7
arm64: dts: rockchip: enable PCIe on ROCK 4D
arm64: dts: rockchip: Enable HDMI receiver on CM3588
arm64: dts: rockchip: Add HDMI PHY PLL clock source to VOP2 on rk3576
arm64: dts: rockchip: Enable HDMI PHY clk provider on rk3576
arm64: dts: rockchip: add DTs for Firefly ROC-RK3588S-PC
dt-bindings: arm: rockchip: Add Firefly ROC-RK3588S-PC
arm64: dts: rockchip: Enable GPU on Radxa E20C
arm64: dts: rockchip: Add GPU node for RK3528
arm64: dts: rockchip: support camera module on Haikou Video Demo on PX30 Ringneck
arm64: dts: rockchip: add label to first port of ISP on px30
arm64: dts: rockchip: fix endpoint dtc warning for PX30 ISP
arm64: dts: rockchip: Add power controller for RK3528
arm64: dts: rockchip: enable USB on Sige5
arm64: dts: rockchip: add overlay for the WiFi/BT module on Sige5 v1.2
arm64: dts: rockchip: add version-independent WiFi/BT nodes on Sige5
arm64: dts: rockchip: add SDIO controller on RK3576
arm64: dts: rockchip: Enable gpu on rk3576-evb1-v10
arm64: dts: rockchip: Update the PinePhone Pro panel description
...
Link: https://lore.kernel.org/r/15465458.uLZWGnKmhe@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Renesas DTS updates for v6.17 (take two)
- Add support for the Renesas Gray Hawk Single board with R-Car
V4M-7 (R8A779H2),
- Add eMMC and microSD expansion board support for the RZ/V2H and
RZ/V2N EVK development boards,
- Add GPIO keys and Ethernet support for the RZ/G3E SoM and SMARC
Carrier-II EVK development board,
- Add QSPI FLASH support for the RZ/V2H and RZ/V2N SoCs and their EVK
development boards,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.17-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable serial NOR FLASH
arm64: dts: renesas: r9a09g056n48-rzv2n-evk: Enable serial NOR FLASH
arm64: dts: renesas: r9a09g057: Add XSPI node
arm64: dts: renesas: r9a09g056: Add XSPI node
arm64: dts: renesas: r9a09g056n48-rzv2n-evk: Fix pinctrl node name for GBETH1
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Fix pinctrl node name for GBETH1
arm64: dts: renesas: r8a779g3-sparrow-hawk-fan-pwm: Add missing install target
arm64: dts: renesas: rzg3e-smarc-som: Enable eth{0-1} (GBETH) interfaces
arm64: dts: renesas: r9a09g047e57-smarc: Add gpio keys
arm64: dts: renesas: Add CN15 eMMC and SD overlays for RZ/V2H and RZ/V2N EVKs
arm64: dts: renesas: r8a779h2: Add Gray Hawk Single support
arm64: dts: renesas: Add Renesas R8A779H2 SoC support
arm64: dts: renesas: Factor out Gray Hawk Single board support
dt-bindings: clock: renesas,r9a09g056/57-cpg: Add XSPI core clock
Link: https://lore.kernel.org/r/cover.1752090401.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM64 changes for v6.17
1. New SoC - Exynos2200 SoC - with basic nodes, pin controllers,
clock controllers and initial USB support. Add board using it:
Samsung Galaxy S22+ (SM-S906B), called G0S.
2. ExynosAutov920: Add CMU_HSI2 clock controller, remaining SPI nodes
3. Google GS101:
- Prepare to switching to architected timer, instead of Exynos MCT as
the primary one.
- Add secondary Maxim MAX77759 PMIC to Pixel boards, managing USB Type-C and
charger.
- Add incomplete description of the primary Samsung S2MPG10 PMIC.
Several bits, like regulators, are still missing, though.
- Add also secondary reboot-mode, via MAX77759 NVMEM.
- Switch the primary (SoC) reboot handler to Google specific
google,gs101-reboot which gives additional GS101 features (cold and
warm reboots).
This change will affect other users of this DTS, but to our
knowledge there is only Android, from which this change originates.
4. Exynos7870:
- Fix speed problems in USB gadget mode.
- Correct memory map to avoid crashes due to secure world.
* tag 'samsung-dt64-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos7870-j6lte: reduce memory ranges to base amount
arm64: dts: exynos7870-on7xelte: reduce memory ranges to base amount
arm64: dts: exynos7870: add quirk to disable USB2 LPM in gadget mode
arm64: dts: exynos: gs101: switch to gs101 specific reboot
arm64: dts: exynos: gs101-pixel-common: add main PMIC node
arm64: dts: exynos: gs101: ufs: add dma-coherent property
arm64: dts: exynos: gs101: add dm-verity-device-corrupted syscon-reboot-mode
arm64: dts: exynos: gs101-pixel-common: add nvmem-reboot-mode
arm64: dts: exynos: gs101-pixel-common: add Maxim MAX77759 PMIC
arm64: dts: exynos5433: Align i2c-gpio node names with dtschema
arm64: dts: exynos: gs101: Add 'local-timer-stop' to cpuidle nodes
arm64: dts: exynosautov920: Add DT node for all SPI ports
arm64: dts: exynosautov920: add CMU_HSI2 clock DT nodes
MAINTAINERS: add entry for Samsung Exynos2200 SoC
arm64: dts: exynos: add initial support for Samsung Galaxy S22+
arm64: dts: exynos: add initial support for exynos2200 SoC
dt-bindings: arm: samsung: document g0s board binding
Link: https://lore.kernel.org/r/20250709191523.171359-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
VT8500 DTS ARM changes for v6.17
1. Several dtbs_check cleanups.
2. Add missing cache topology - L2 cache controller on WM8850/WM895.
* tag 'dt-vt8500-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
ARM: dts: vt8500: Add L2 cache controller on WM8850/WM8950
ARM: dts: vt8500: Fix the unit address of the VT8500 LCD controller
ARM: dts: vt8500: Use generic node name for the SD/MMC controller
ARM: dts: vt8500: Move memory nodes to board dts and fix addr/size
ARM: dts: vt8500: Add node address and reg in CPU nodes
Link: https://lore.kernel.org/r/20250709184800.168462-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On nodes with compatible "rockchip,px30-usb2phy-grf", the #address-cells
and #size-cells are required and consequently their child nodes should
have unit addresses. That is not the case for the px30-pmugrf and
px30-grf nodes, so remove them there.
This fixes the following DTB validation warnings:
unnecessary #address-cells/#size-cells without "ranges",
"dma-ranges" or child "reg" property
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250709132323.128757-10-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The MIPI DSI connector on the PineTab2 only has 1 port with 1 endpoint,
so drop the unit-address properties.
While at it, move 'rotation' property to its proper sorting position.
This fixes the following DTB validation warnings:
node has a unit name, but no reg or ranges property
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250709132323.128757-9-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The only thing actually added here is a single endpoint on edp_out,
which is already defined in rk3399-base.dtsi, so it's simpler to just
reference that phandle, which allows the removal of several properties.
This fixes the following DTB validation warnings:
graph node has single child node 'endpoint@0',
#address-cells/#size-cells are not necessary
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250709132323.128757-6-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
When there's only 1 endpoint, there is no need for a unit-address and
removing that allows removing of related properties as well.
This fixes the following DTB validation warnings:
graph node has single child node 'endpoint@0',
#address-cells/#size-cells are not necessary
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250709132323.128757-5-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
All devices based on the A523/A527/H728/T527 processors contain a G57 MC1 GPU.
Enable the DT nodes for this GPU and specify a regulator that supplies power
to the SoC's VDD_GPU pins. The other parameters are set in the SoC dtsi,
so are board independent.
Signed-off-by: Mikhail Kalashnikov <iuncuim@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250711035730.17507-4-iuncuim@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The Allwinner A523 SoC features the Mali-G57 MC1 GPU, which belongs
to the Mali Valhall (v9) family. There is a power domain specifically
for this GPU that needs to be enabled to utilize it.
To enable in a specific device, we need to enable the gpu node and specify
the “mali-supply” regulator additionally in the device tree.
Signed-off-by: Mikhail Kalashnikov <iuncuim@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250711035730.17507-3-iuncuim@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The A523 PPU is likely the same kind of hardware seen on previous SoCs.
The A523 PCK600, as the name suggests, is likely a customized version
of ARM's PCK-600 power controller. Comparing the BSP driver against
ARM's PPU datasheet shows that the basic registers line up, but
Allwinner's hardware has some additional delay controls in the reserved
register range. As such it is likely not fully compatible with the
standard ARM version.
Document A523 PPU and PCK600 compatibles.
Also reorder the compatible string entries so they are grouped and
ordered by family first, then by SoC model.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20250712074021.805953-2-wens@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The #address-cells and #size-cells properties are not useful on the DSI
controller node; they are only useful/required on ports and panel(s).
So remove them from the controller node and add them where actually
needed on the various rk3399 based boards.
This fixes the following DTB validation warnings:
unnecessary #address-cells/#size-cells without "ranges",
"dma-ranges" or child "reg" property
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250709132323.128757-3-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The #address-cells and #size-cells properties are not useful on the DSI
controller node; they are only useful/required on ports and panel(s).
So remove them from the controller node and add them where actually
needed on the various px30 based boards, which includes rk3326.
This fixes the following DTB validation warnings:
unnecessary #address-cells/#size-cells without "ranges",
"dma-ranges" or child "reg" property
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250709132323.128757-2-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
