Adds the support for HiSilicon NoC (Network on Chip) PMU which
will be used to monitor the events on the system bus. The PMU
device will be named after the SCL ID (either Super CPU cluster
or Super IO cluster) and the index ID, just similar to other
HiSilicon Uncore PMUs. Below PMU formats are provided besides
the event:
- ch: the transaction channel (data, request, response, etc) which
can be used to filter the counting.
- tt_en: tracetag filtering enable. Just as other HiSilicon Uncore
PMUs the NoC PMU supports only counting the transactions with
tracetag.
The NoC PMU doesn't have an interrupt to indicate the overflow.
However we have a 64 bit counter which is large enough and it's
nearly impossible to overflow.
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Will Deacon <will@kernel.org>
SPE data source filtering (optional from Armv8.8) requires that traps to
the filter register PMSDSFR be disabled. Document the requirements and
disable the traps if the feature is present.
Tested-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
While Designware PCIe PMU allows to count only one time based event
at a time, it allows to count all the lane events simultaneously.
After the patch one is able to count a group of lane events:
$ perf stat -e '{dwc_rootport/tx_memory_write,lane=1/,dwc_rootport/rx_memory_read,lane=0/}' dd if=/dev/nvme0n1 of=/dev/null bs=1M count=1
Earlier the events wouldn't have been counted successfully.
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Will Deacon <will@kernel.org>
Add a netlink family for PSP and allow drivers to register support.
The "PSP device" is its own object. This allows us to perform more
flexible reference counting / lifetime control than if PSP information
was part of net_device. In the future we should also be able
to "delegate" PSP access to software devices, such as *vlan, veth
or netkit more easily.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250917000954.859376-3-daniel.zahka@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
FW crashes are detected based on uptime going back, expose the uptime
via devlink health diagnose.
$ devlink -j health diagnose pci/0000:01:00.0 reporter fw
{"last_heartbeat":{"fw_uptime":{"sec":201,"msec":76}}}
$ devlink -j health diagnose pci/0000:01:00.0 reporter fw
last_heartbeat:
fw_uptime:
sec: 201 msec: 76
Reviewed-by: Lee Trager <lee@trager.us>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250916231420.1693955-9-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This adds the following apple,t6020/t6021/t6022 platforms:
- apple,j414s - MacBook Pro (14-inch, M2 Pro, 2023)
- apple,j414c - MacBook Pro (14-inch, M2 Nax, 2023)
- apple,j416s - MacBook Pro (16-inch, M2 Pro, 2023)
- apple,j416c - MacBook Pro (16-inch, M2 Max, 2023)
- apple,j474s - Mac mini (M2 Pro, 2023)
- apple,j475c - Mac Studio (M2 Max, 2023)
- apple,j475d - Mac Studio (M2 Ultra, 2023)
- apple,j475d - Mac Pro (M2 Ultra, 2023)
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Sven Peter <sven@kernel.org>
ASoC: Fixes for v6.17
A pile of fixes that accumilated over the past few -rcs, this is all
driver specifics including a small pile of quirks for new systems.
Instead of sending the option in every ACK, limit sending to
those ACKs where the option is necessary:
- Handshake
- "Change-triggered ACK" + the ACK following it. The
2nd ACK is necessary to unambiguously indicate which
of the ECN byte counters in increasing. The first
ACK has two counters increasing due to the ecnfield
edge.
- ACKs with CE to allow CEP delta validations to take
advantage of the option.
- Force option to be sent every at least once per 2^22
bytes. The check is done using the bit edges of the
byte counters (avoids need for extra variables).
- AccECN option beacon to send a few times per RTT even if
nothing in the ECN state requires that. The default is 3
times per RTT, and its period can be set via
sysctl_tcp_ecn_option_beacon.
Below are the pahole outcomes before and after this patch,
in which the group size of tcp_sock_write_tx is increased
from 89 to 97 due to the new u64 accecn_opt_tstamp member:
[BEFORE THIS PATCH]
struct tcp_sock {
[...]
u64 tcp_wstamp_ns; /* 2488 8 */
struct list_head tsorted_sent_queue; /* 2496 16 */
[...]
__cacheline_group_end__tcp_sock_write_tx[0]; /* 2521 0 */
__cacheline_group_begin__tcp_sock_write_txrx[0]; /* 2521 0 */
u8 nonagle:4; /* 2521: 0 1 */
u8 rate_app_limited:1; /* 2521: 4 1 */
/* XXX 3 bits hole, try to pack */
/* Force alignment to the next boundary: */
u8 :0;
u8 received_ce_pending:4;/* 2522: 0 1 */
u8 unused2:4; /* 2522: 4 1 */
u8 accecn_minlen:2; /* 2523: 0 1 */
u8 est_ecnfield:2; /* 2523: 2 1 */
u8 unused3:4; /* 2523: 4 1 */
[...]
__cacheline_group_end__tcp_sock_write_txrx[0]; /* 2628 0 */
[...]
/* size: 3200, cachelines: 50, members: 171 */
}
[AFTER THIS PATCH]
struct tcp_sock {
[...]
u64 tcp_wstamp_ns; /* 2488 8 */
u64 accecn_opt_tstamp; /* 2596 8 */
struct list_head tsorted_sent_queue; /* 2504 16 */
[...]
__cacheline_group_end__tcp_sock_write_tx[0]; /* 2529 0 */
__cacheline_group_begin__tcp_sock_write_txrx[0]; /* 2529 0 */
u8 nonagle:4; /* 2529: 0 1 */
u8 rate_app_limited:1; /* 2529: 4 1 */
/* XXX 3 bits hole, try to pack */
/* Force alignment to the next boundary: */
u8 :0;
u8 received_ce_pending:4;/* 2530: 0 1 */
u8 unused2:4; /* 2530: 4 1 */
u8 accecn_minlen:2; /* 2531: 0 1 */
u8 est_ecnfield:2; /* 2531: 2 1 */
u8 accecn_opt_demand:2; /* 2531: 4 1 */
u8 prev_ecnfield:2; /* 2531: 6 1 */
[...]
__cacheline_group_end__tcp_sock_write_txrx[0]; /* 2636 0 */
[...]
/* size: 3200, cachelines: 50, members: 173 */
}
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Co-developed-by: Ilpo Järvinen <ij@kernel.org>
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250916082434.100722-8-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The Accurate ECN allows echoing back the sum of bytes for
each IP ECN field value in the received packets using
AccECN option. This change implements AccECN option tx & rx
side processing without option send control related features
that are added by a later change.
Based on specification:
https://tools.ietf.org/id/draft-ietf-tcpm-accurate-ecn-28.txt
(Some features of the spec will be added in the later changes
rather than in this one).
A full-length AccECN option is always attempted but if it does
not fit, the minimum length is selected based on the counters
that have changed since the last update. The AccECN option
(with 24-bit fields) often ends in odd sizes so the option
write code tries to take advantage of some nop used to pad
the other TCP options.
The delivered_ecn_bytes pairs with received_ecn_bytes similar
to how delivered_ce pairs with received_ce. In contrast to
ACE field, however, the option is not always available to update
delivered_ecn_bytes. For ACK w/o AccECN option, the delivered
bytes calculated based on the cumulative ACK+SACK information
are assigned to one of the counters using an estimation
heuristic to select the most likely ECN byte counter. Any
estimation error is corrected when the next AccECN option
arrives. It may occur that the heuristic gets too confused
when there are enough different byte counter deltas between
ACKs with the AccECN option in which case the heuristic just
gives up on updating the counters for a while.
tcp_ecn_option sysctl can be used to select option sending
mode for AccECN: TCP_ECN_OPTION_DISABLED, TCP_ECN_OPTION_MINIMUM,
and TCP_ECN_OPTION_FULL.
This patch increases the size of tcp_info struct, as there is
no existing holes for new u32 variables. Below are the pahole
outcomes before and after this patch:
[BEFORE THIS PATCH]
struct tcp_info {
[...]
__u32 tcpi_total_rto_time; /* 244 4 */
/* size: 248, cachelines: 4, members: 61 */
}
[AFTER THIS PATCH]
struct tcp_info {
[...]
__u32 tcpi_total_rto_time; /* 244 4 */
__u32 tcpi_received_ce; /* 248 4 */
__u32 tcpi_delivered_e1_bytes; /* 252 4 */
__u32 tcpi_delivered_e0_bytes; /* 256 4 */
__u32 tcpi_delivered_ce_bytes; /* 260 4 */
__u32 tcpi_received_e1_bytes; /* 264 4 */
__u32 tcpi_received_e0_bytes; /* 268 4 */
__u32 tcpi_received_ce_bytes; /* 272 4 */
/* size: 280, cachelines: 5, members: 68 */
}
This patch uses the existing 1-byte holes in the tcp_sock_write_txrx
group for new u8 members, but adds a 4-byte hole in tcp_sock_write_rx
group after the new u32 delivered_ecn_bytes[3] member. Therefore, the
group size of tcp_sock_write_rx is increased from 96 to 112. Below
are the pahole outcomes before and after this patch:
[BEFORE THIS PATCH]
struct tcp_sock {
[...]
u8 received_ce_pending:4; /* 2522: 0 1 */
u8 unused2:4; /* 2522: 4 1 */
/* XXX 1 byte hole, try to pack */
[...]
u32 rcv_rtt_last_tsecr; /* 2668 4 */
[...]
__cacheline_group_end__tcp_sock_write_rx[0]; /* 2728 0 */
[...]
/* size: 3200, cachelines: 50, members: 167 */
}
[AFTER THIS PATCH]
struct tcp_sock {
[...]
u8 received_ce_pending:4;/* 2522: 0 1 */
u8 unused2:4; /* 2522: 4 1 */
u8 accecn_minlen:2; /* 2523: 0 1 */
u8 est_ecnfield:2; /* 2523: 2 1 */
u8 unused3:4; /* 2523: 4 1 */
[...]
u32 rcv_rtt_last_tsecr; /* 2668 4 */
u32 delivered_ecn_bytes[3];/* 2672 12 */
/* XXX 4 bytes hole, try to pack */
[...]
__cacheline_group_end__tcp_sock_write_rx[0]; /* 2744 0 */
[...]
/* size: 3200, cachelines: 50, members: 171 */
}
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Co-developed-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250916082434.100722-7-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
These three byte counters track IP ECN field payload byte sums for
all arriving (acceptable) packets for ECT0, ECT1, and CE. The
AccECN option (added by a later patch in the series) echoes these
counters back to sender side; therefore, it is placed within the
group of tcp_sock_write_txrx.
Below are the pahole outcomes before and after this patch, in which
the group size of tcp_sock_write_txrx is increased from 95 + 4 to
107 + 4 and an extra 4-byte hole is created but will be exploited
in later patches:
[BEFORE THIS PATCH]
struct tcp_sock {
[...]
u32 delivered_ce; /* 2576 4 */
u32 received_ce; /* 2580 4 */
u32 app_limited; /* 2584 4 */
u32 rcv_wnd; /* 2588 4 */
struct tcp_options_received rx_opt; /* 2592 24 */
__cacheline_group_end__tcp_sock_write_txrx[0]; /* 2616 0 */
[...]
/* size: 3200, cachelines: 50, members: 166 */
}
[AFTER THIS PATCH]
struct tcp_sock {
[...]
u32 delivered_ce; /* 2576 4 */
u32 received_ce; /* 2580 4 */
u32 received_ecn_bytes[3];/* 2584 12 */
u32 app_limited; /* 2596 4 */
u32 rcv_wnd; /* 2600 4 */
struct tcp_options_received rx_opt; /* 2604 24 */
__cacheline_group_end__tcp_sock_write_txrx[0]; /* 2628 0 */
/* XXX 4 bytes hole, try to pack */
[...]
/* size: 3200, cachelines: 50, members: 167 */
}
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Co-developed-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250916082434.100722-4-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Accurate ECN negotiation parts based on the specification:
https://tools.ietf.org/id/draft-ietf-tcpm-accurate-ecn-28.txt
Accurate ECN is negotiated using ECE, CWR and AE flags in the
TCP header. TCP falls back into using RFC3168 ECN if one of the
ends supports only RFC3168-style ECN.
The AccECN negotiation includes reflecting IP ECN field value
seen in SYN and SYNACK back using the same bits as negotiation
to allow responding to SYN CE marks and to detect ECN field
mangling. CE marks should not occur currently because SYN=1
segments are sent with Non-ECT in IP ECN field (but proposal
exists to remove this restriction).
Reflecting SYN IP ECN field in SYNACK is relatively simple.
Reflecting SYNACK IP ECN field in the final/third ACK of
the handshake is more challenging. Linux TCP code is not well
prepared for using the final/third ACK a signalling channel
which makes things somewhat complicated here.
tcp_ecn sysctl can be used to select the highest ECN variant
(Accurate ECN, ECN, No ECN) that is attemped to be negotiated and
requested for incoming connection and outgoing connection:
TCP_ECN_IN_NOECN_OUT_NOECN, TCP_ECN_IN_ECN_OUT_ECN,
TCP_ECN_IN_ECN_OUT_NOECN, TCP_ECN_IN_ACCECN_OUT_ACCECN,
TCP_ECN_IN_ACCECN_OUT_ECN, and TCP_ECN_IN_ACCECN_OUT_NOECN.
After this patch, the size of tcp_request_sock remains unchanged
and no new holes are added. Below are the pahole outcomes before
and after this patch:
[BEFORE THIS PATCH]
struct tcp_request_sock {
[...]
u32 rcv_nxt; /* 352 4 */
u8 syn_tos; /* 356 1 */
/* size: 360, cachelines: 6, members: 16 */
}
[AFTER THIS PATCH]
struct tcp_request_sock {
[...]
u32 rcv_nxt; /* 352 4 */
u8 syn_tos; /* 356 1 */
bool accecn_ok; /* 357 1 */
u8 syn_ect_snt:2; /* 358: 0 1 */
u8 syn_ect_rcv:2; /* 358: 2 1 */
u8 accecn_fail_mode:4; /* 358: 4 1 */
/* size: 360, cachelines: 6, members: 20 */
}
After this patch, the size of tcp_sock remains unchanged and no new
holes are added. Also, 4 bits of the existing 2-byte hole are exploited.
Below are the pahole outcomes before and after this patch:
[BEFORE THIS PATCH]
struct tcp_sock {
[...]
u8 dup_ack_counter:2; /* 2761: 0 1 */
u8 tlp_retrans:1; /* 2761: 2 1 */
u8 unused:5; /* 2761: 3 1 */
u8 thin_lto:1; /* 2762: 0 1 */
u8 fastopen_connect:1; /* 2762: 1 1 */
u8 fastopen_no_cookie:1; /* 2762: 2 1 */
u8 fastopen_client_fail:2; /* 2762: 3 1 */
u8 frto:1; /* 2762: 5 1 */
/* XXX 2 bits hole, try to pack */
[...]
u8 keepalive_probes; /* 2765 1 */
/* XXX 2 bytes hole, try to pack */
[...]
/* size: 3200, cachelines: 50, members: 164 */
}
[AFTER THIS PATCH]
struct tcp_sock {
[...]
u8 dup_ack_counter:2; /* 2761: 0 1 */
u8 tlp_retrans:1; /* 2761: 2 1 */
u8 syn_ect_snt:2; /* 2761: 3 1 */
u8 syn_ect_rcv:2; /* 2761: 5 1 */
u8 thin_lto:1; /* 2761: 7 1 */
u8 fastopen_connect:1; /* 2762: 0 1 */
u8 fastopen_no_cookie:1; /* 2762: 1 1 */
u8 fastopen_client_fail:2; /* 2762: 2 1 */
u8 frto:1; /* 2762: 4 1 */
/* XXX 3 bits hole, try to pack */
[...]
u8 keepalive_probes; /* 2765 1 */
u8 accecn_fail_mode:4; /* 2766: 0 1 */
/* XXX 4 bits hole, try to pack */
/* XXX 1 byte hole, try to pack */
[...]
/* size: 3200, cachelines: 50, members: 166 */
}
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Co-developed-by: Olivier Tilmans <olivier.tilmans@nokia.com>
Signed-off-by: Olivier Tilmans <olivier.tilmans@nokia.com>
Co-developed-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250916082434.100722-3-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This change implements Accurate ECN without negotiation and
AccECN Option (that will be added by later changes). Based on
AccECN specifications:
https://tools.ietf.org/id/draft-ietf-tcpm-accurate-ecn-28.txt
Accurate ECN allows feeding back the number of CE (congestion
experienced) marks accurately to the sender in contrast to
RFC3168 ECN that can only signal one marks-seen-yes/no per RTT.
Congestion control algorithms can take advantage of the accurate
ECN information to fine-tune their congestion response to avoid
drastic rate reduction when only mild congestion is encountered.
With Accurate ECN, tp->received_ce (r.cep in AccECN spec) keeps
track of how many segments have arrived with a CE mark. Accurate
ECN uses ACE field (ECE, CWR, AE) to communicate the value back
to the sender which updates tp->delivered_ce (s.cep) based on the
feedback. This signalling channel is lossy when ACE field overflow
occurs.
Conservative strategy is selected here to deal with the ACE
overflow, however, some strategies using the AccECN option later
in the overall patchset mitigate against false overflows detected.
The ACE field values on the wire are offset by
TCP_ACCECN_CEP_INIT_OFFSET. Delivered_ce/received_ce count the
real CE marks rather than forcing all downstream users to adapt
to the wire offset.
This patch uses the first 1-byte hole and the last 4-byte hole of
the tcp_sock_write_txrx for 'received_ce_pending' and 'received_ce'.
Also, the group size of tcp_sock_write_txrx is increased from
91 + 4 to 95 + 4 due to the new u32 received_ce member. Below are
the trimmed pahole outcomes before and after this patch.
[BEFORE THIS PATCH]
struct tcp_sock {
[...]
__cacheline_group_begin__tcp_sock_write_txrx[0]; /* 2521 0 */
u8 nonagle:4; /* 2521: 0 1 */
u8 rate_app_limited:1; /* 2521: 4 1 */
/* XXX 3 bits hole, try to pack */
/* XXX 2 bytes hole, try to pack */
[...]
u32 delivered_ce; /* 2576 4 */
u32 app_limited; /* 2580 4 */
u32 rcv_wnd; /* 2684 4 */
struct tcp_options_received rx_opt; /* 2688 24 */
__cacheline_group_end__tcp_sock_write_txrx[0]; /* 2612 0 */
/* XXX 4 bytes hole, try to pack */
[...]
/* size: 3200, cachelines: 50, members: 161 */
}
[AFTER THIS PATCH]
struct tcp_sock {
[...]
__cacheline_group_begin__tcp_sock_write_txrx[0]; /* 2521 0 */
u8 nonagle:4; /* 2521: 0 1 */
u8 rate_app_limited:1; /* 2521: 4 1 */
/* XXX 3 bits hole, try to pack */
/* Force alignment to the next boundary: */
u8 :0;
u8 received_ce_pending:4;/* 2522: 0 1 */
u8 unused2:4; /* 2522: 4 1 */
/* XXX 1 byte hole, try to pack */
[...]
u32 delivered_ce; /* 2576 4 */
u32 received_ce; /* 2580 4 */
u32 app_limited; /* 2584 4 */
u32 rcv_wnd; /* 2588 4 */
struct tcp_options_received rx_opt; /* 2592 24 */
__cacheline_group_end__tcp_sock_write_txrx[0]; /* 2616 0 */
[...]
/* size: 3200, cachelines: 50, members: 164 */
}
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Co-developed-by: Olivier Tilmans <olivier.tilmans@nokia.com>
Signed-off-by: Olivier Tilmans <olivier.tilmans@nokia.com>
Co-developed-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250916082434.100722-2-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use the new devlink param to control how many doorbells mlx5e devices
allocate and use. The maximum number of doorbells configurable is capped
to the maximum number of channels. This only applies to the Ethernet
part, the RDMA devices using mlx5 manage their own doorbells.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some battery drivers provide the ability to export internal resistance
as a parameter. Add internal_resistance power supply property for that
purpose.
Signed-off-by: Fenglin Wu <fenglin.wu@oss.qualcomm.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Document active low Charge Enable pin. Battery charging is enabled when
REG01[5:4] = 01 and CE pin = Low. CE pin must be pulled high or low.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Himax HX852x(ES) is a touch panel controller with optional support
for capacitive touch keys.
Unfortunately, the model naming is quite unclear and confusing. There
seems to be a distinction between models (e.g. HX8526) and the "series"
suffix (e.g. -A, -B, -C, -D, -E, -ES). But this doesn't seem to be
applied very consistently because e.g. HX8527-E(44) actually seems to
belong to the -ES series.
The compatible consists of the actual part number followed by the
"series" as fallback compatible. Typically only the latter will be
interesting for drivers as there is no relevant difference on the
driver side.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20250915-hx852x-v5-1-b938182f1056@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add required syscon compatible and #power-domain-cells to the APMU
controller. This is required for the SoC's power domain controller as
the registers are shared.
Device tree bindings for said power domains are also added.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Document the Renesas RZ/G3E USB3.2 Gen2 Host Controller (a.k.a USB3HOST).
The USB3HOST is compliant with the Universal Serial Bus 3.2 Specification
Revision 1.0.
- Supports 1 downstream USB receptacles
- Number of SSP Gen2 or SS ports: 1
- Number of HS or FS or LS ports: 1
- Supports Super Speed Plus Gen2x1 (10 Gbps), Super Speed (5 Gbps),
High Speed (480 Mbps), Full Speed (12Mbps), and Low Speed (1.5 Mbps).
- Supports all transfer-types: Control, Bulk, Interrupt, Isochronous, and
these split-transactions.
- Supports Power Control and Over Current Detection.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250916150255.4231-4-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ze Huang <huang.ze@linux.dev> says:
The USB 3.0 controller found in the SpacemiT K1 SoC[1] supports both
USB3.0 Host and USB2.0 Dual-Role Device (DRD).
This controller is compatible with DesignWare Core USB 3 (DWC3) driver.
However, constraints in the `snps,dwc3` bindings limit the ability to
describe hardware-specific features in a clean and maintainable way.
While `dwc3-of-simple` still serves as a glue layer for many platforms,
it requires a split device tree node structure, which is less desirable
in newer platforms.
To promote a transition toward a flattened `dwc` node structure, this
series introduces `dwc3-generic-plat`, building upon prior efforts that
exposed the DWC3 core driver [2].
The device tree support for SpacemiT K1 will be submitted separately
when the associated PHY driver is ready.
Link: https://developer.spacemit.com/documentation?token=AjHDwrW78igAAEkiHracBI9HnTb [1]
Link: https://lore.kernel.org/all/20250414-dwc3-refactor-v7-3-f015b358722d@oss.qualcomm.com [2]
Link: https://lore.kernel.org/r/20250913-dwc3_generic-v8-0-b50f81f05f95@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DRM Rust changes for v6.18
Alloc
- Add BorrowedPage type and AsPageIter trait
- Implement Vmalloc::to_page() and VmallocPageIter
- Implement AsPageIter for VBox and VVec
DMA & Scatterlist
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and struct sg_table
DRM
- In the DRM GEM module, simplify overall use of generics, add
DriverFile type alias and drop Object::SIZE.
Nova (Core)
- Various register!() macro improvements (paving the way for lifting
it to common driver infrastructure)
- Minor VBios fixes and refactoring
- Minor firmware request refactoring
- Advance firmware boot stages; process Booter and patch its
signature, process GSP and GSP bootloader
- Switch development fimrware version to r570.144
- Add basic firmware bindings for r570.144
- Move GSP boot code to its own module
- Clean up and take advantage of pin-init features to store most of
the driver's private data within a single allocation
- Update ARef import from sync::aref
- Add website to MAINTAINERS entry
Nova (DRM)
- Update ARef import from sync::aref
- Add website to MAINTAINERS entry
Pin-Init
- Merge pin-init PR from Benno
- `#[pin_data]` now generates a `*Projection` struct similar to the
`pin-project` crate.
- Add initializer code blocks to `[try_][pin_]init!` macros: make
initializer macros accept any number of `_: {/* arbitrary code
*/},` & make them run the code at that point.
- Make the `[try_][pin_]init!` macros expose initialized fields via
a `let` binding as `&mut T` or `Pin<&mut T>` for later fields.
Rust
- Various methods for AsBytes and FromBytes traits
Tyr
- Initial Rust driver skeleton for ARM Mali GPUs.
- It can power up the GPU, query for GPU metatdata through MMIO and
provide the metadata to userspace via DRM device IOCTL (struct
drm_panthor_dev_query).
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: "Danilo Krummrich" <dakr@kernel.org>
Link: https://lore.kernel.org/r/DCUC4SY6SRBD.1ZLHAIQZOC6KG@kernel.org
Add "clock-output-names" which is a standard property for clock
providers.
Add the "always-on" boolean property which was undocumented, but
already in use for some time. The flag prevents a clock output from
being disabled.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
I'm trying to generate Rust bindings for netlink using the yaml spec.
It looks like there's a typo in conntrack spec: attribute set conntrack-attrs
defines attributes "counters-{orig,reply}" (plural), while get operation
references "counter-{orig,reply}" (singular). The latter should be fixed, as it
denotes multiple counters (packet and byte). The corresonding C define is
CTA_COUNTERS_ORIG.
Also, dump request references "nfgen-family" attribute, which neither exists in
conntrack-attrs attrset nor ctattr_type enum. There's member of nfgenmsg struct
with the same name, which is where family value is actually taken from.
> static int ctnetlink_dump_exp_ct(struct net *net, struct sock *ctnl,
> struct sk_buff *skb,
> const struct nlmsghdr *nlh,
> const struct nlattr * const cda[],
> struct netlink_ext_ack *extack)
> {
> int err;
> struct nfgenmsg *nfmsg = nlmsg_data(nlh);
> u_int8_t u3 = nfmsg->nfgen_family;
^^^^^^^^^^^^
Signed-off-by: Remy D. Farley <one-d-wide@protonmail.com>
Fixes: 23fc9311a5 ("netlink: specs: add conntrack dump and stats dump support")
Link: https://patch.msgid.link/20250913140515.1132886-1-one-d-wide@protonmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge series from Alexey Klimov <alexey.klimov@linaro.org>:
PMICs like PM4125 have in-built audio codec IC. The series here
adds support for this codec driver: DT bindings and codec driver
itself that consists mainly of two parts: soundwire devices and
codec part itself.
This audio codec can be found on platforms like QCM2290 and
on Qualcomm QRB2210 RB1 board.
We are working on this together with Srini
(srinivas.kandagatla@oss.qualcomm.com or srini@kernel.org).
This driver also has a bit limited support for concurrent playback,
since line out path is connected to left input channel.
Explicitly document that the behavior of KVM_SET_PIT2 strictly conforms
to the Intel 8254 PIT hardware specification, specifically that a write of
'0' adheres to the spec's definition that a programmed count of '0' is
converted to the maximum possible value (2^16). E.g. an unaware userspace
might attempt to validate that KVM_GET_PIT2 returns the exact state set
via KVM_SET_PIT2, and be surprised when the returned count is 65536, not 0.
Add a references to the Intel 8254 PIT datasheet that will hopefully stay
fresh for some time (the internet isn't exactly brimming with copies of
the 8254 datasheet).
Link: https://lore.kernel.org/all/CANypQFbEySjKOFLqtFFf2vrEe=NBr7XJfbkjQhqXuZGg7Rpoxw@mail.gmail.com
Signed-off-by: Jiaming Zhang <r772577952@gmail.com>
Link: https://lore.kernel.org/r/20250905174736.260694-1-r772577952@gmail.com
[sean: add context Link, drop local APIC change, massage changelog accordingly]
Signed-off-by: Sean Christopherson <seanjc@google.com>
As per admin guide documentation, "rodata=on" should be the default on
platforms. Documentation/admin-guide/kernel-parameters.txt describes
these options as
rodata= [KNL,EARLY]
on Mark read-only kernel memory as read-only (default).
off Leave read-only kernel memory writable for debugging.
full Mark read-only kernel memory and aliases as read-only
[arm64]
But on arm64 platform, RODATA_FULL_DEFAULT_ENABLED is enabled by default,
so "rodata=full" is the default instead.
For parity with other architectures, namely x86, rework 'rodata=on' to
match the current "full" behaviour and replace 'rodata=full' with a new
'rodata=noalias' option which retains writable aliases in the direct map
for memory regions outside of the kernel image.
Signed-off-by: Huang Shijie <shijie@os.amperecomputing.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
