Commit 51bef03e1a ("selftests/net: deflake GRO tests") recently
switched to NAPI suspension, and lowered the timeout from 1ms to 100us.
This started causing flakes in netdev-run CI. Let's bump it to 200us.
In a quick test of a debug kernel I see failures with 100us, with 200us
in 5 runs I see 2 completely clean runs and 3 with a single retry
(GRO test will retry up to 5 times).
Reviewed-by: Kevin Krakauer <krakauer@google.com>
Link: https://patch.msgid.link/20250310110821.385621-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bnxt_dl_reload_up is completely missing instance lock management
which can result in `devlink dev reload` leaving with instance
lock held. Add the missing calls.
Also add netdev_assert_locked to make it clear that the up() method
is running with the instance lock grabbed.
v2:
- add net/netdev_lock.h include to bnxt_devlink.c for netdev_assert_locked
Fixes: 004b500801 ("eth: bnxt: remove most dependencies on RTNL")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250309215851.2003708-3-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netdev_lock_ops conditionally grabs instance lock when queue_mgmt_ops
is defined. However queue_mgmt_ops support is signaled via FW
so we can sometimes boot without queue_mgmt_ops being set.
This will result in bnxt running without instance lock which
the driver now heavily depends on. Set request_ops_lock to true
unconditionally to always request netdev instance lock.
Fixes: 004b500801 ("eth: bnxt: remove most dependencies on RTNL")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250309215851.2003708-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a couple of places from which we can arrive to ndo_setup_tc
with TC_SETUP_BLOCK/TC_SETUP_FT:
- netlink
- netlink notifier
- netdev notifier
Locking netdev too deep in this call chain seems to be problematic
(especially assuming some/all of the call_netdevice_notifiers
NETDEV_UNREGISTER) might soon be running with the instance lock).
Revert to lockless ndo_setup_tc for TC_SETUP_BLOCK/TC_SETUP_FT. NFT
framework already takes care of most of the locking. Document
the assumptions.
ndo_setup_tc TC_SETUP_BLOCK
nft_block_offload_cmd
nft_chain_offload_cmd
nft_flow_block_chain
nft_flow_offload_chain
nft_flow_rule_offload_abort
nft_flow_rule_offload_commit
nft_flow_rule_offload_commit
nf_tables_commit
nfnetlink_rcv_batch
nfnetlink_rcv_skb_batch
nfnetlink_rcv
nft_offload_netdev_event
NETDEV_UNREGISTER notifier
ndo_setup_tc TC_SETUP_FT
nf_flow_table_offload_cmd
nf_flow_table_offload_setup
nft_unregister_flowtable_hook
nft_register_flowtable_net_hooks
nft_flowtable_update
nf_tables_newflowtable
nfnetlink_rcv_batch (.call NFNL_CB_BATCH)
nft_flowtable_update
nf_tables_newflowtable
nft_flowtable_event
nf_tables_flowtable_event
NETDEV_UNREGISTER notifier
__nft_unregister_flowtable_net_hooks
nft_unregister_flowtable_net_hooks
nf_tables_commit
nfnetlink_rcv_batch (.call NFNL_CB_BATCH)
__nf_tables_abort
nf_tables_abort
nfnetlink_rcv_batch
__nft_release_hook
__nft_release_hooks
nf_tables_pre_exit_net -> module unload
nft_rcv_nl_event
netlink_register_notifier (oh boy)
nft_register_flowtable_net_hooks
nft_flowtable_update
nf_tables_newflowtable
nf_tables_newflowtable
Fixes: c4f0f30b42 ("net: hold netdev instance lock during nft ndo_setup_tc")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reported-by: syzbot+0afb4bcf91e5a1afdcad@syzkaller.appspotmail.com
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250308044726.1193222-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We haven't had much discussion on the list about this, but
a handful of people have been confused about rules on
posting selftests for fixes, lately. I tend to post fixes
with their respective selftests in the same series.
There are tradeoffs around size of the net tree and conflicts
but so far it hasn't been a major issue.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20250306180533.1864075-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is to prepare for native XDP support.
The page pool API is more faster in allocating pages than
__alloc_skb(). Drawback is that it works at PAGE_SIZE granularity
so we are not efficient in memory usage.
i.e. we are using PAGE_SIZE (4KB) memory for 1.5KB max packet size.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Link: https://patch.msgid.link/20250305101422.1908370-2-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Satish Kharat via says:
====================
enic: enable 32, 64 byte cqes and get max rx/tx ring size from hw
This series enables using the max rx and tx ring sizes read from hw.
For newer hw that can be up to 16k entries. This requires bigger
completion entries for rx queues. This series enables the use of the
32 and 64 byte completion queues entries for enic rx queues on
supported hw versions. This is in addition to the exiting (default)
16 byte rx cqes.
Signed-off-by: Satish Kharat <satishkh@cisco.com>
====================
Link: https://patch.msgid.link/20250304-enic_cleanup_and_ext_cq-v2-0-85804263dad8@cisco.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Matthieu Baerts says:
====================
mptcp: pm: code reorganisation
Before this series, the PM code was dispersed in different places:
- pm.c had common code for all PMs.
- pm_netlink.c was initially only about the in-kernel PM, but ended up
also getting exported common helpers, callbacks used by the different
PMs, NL events for PM userspace daemon, etc. quite confusing.
- pm_userspace.c had userspace PM only code, but it was using "specific"
in-kernel PM helpers according to their names.
To clarify the code, a reorganisation is suggested here, only by moving
code around, and small helper renaming to avoid confusions:
- pm_netlink.c now only contains common PM generic Netlink code:
- PM events: this code was already there
- shared helpers around Netlink code that were already there as well
- shared Netlink commands code from pm.c
- pm_kernel.c now contains only code that is specific to the in-kernel
PM. Now all functions are either called from:
- pm.c: events coming from the core, when this PM is being used
- pm_netlink.c: for shared Netlink commands
- mptcp_pm_gen.c: for Netlink commands specific to the in-kernel PM
- sockopt.c: for the exported counters per netns
- pm.c got many code from pm_netlink.c:
- helpers used from both PMs and not linked to Netlink
- callbacks used by different PMs, e.g. ADD_ADDR management
- some helpers have been renamed to remove the '_nl' prefix, and some
have been marked as 'static'.
- protocol.h has been updated accordingly:
- some helpers no longer need to be exported
- new ones needed to be exported: they have been prefixed if needed.
The code around the PM is now less confusing, which should help for the
maintenance in the long term, and the introduction of a PM Ops.
This will certainly impact future backports, but because other cleanups
have already done recently, and more are coming to ease the addition of
a new path-manager controlled with BPF (struct_ops), doing that now
seems to be a good time. Also, many issues around the PM have been fixed
a few months ago while increasing the code coverage in the selftests, so
such big reorganisation can be done with more confidence now.
Note that checkpatch, when used with --max-line-length=80, will complain
about lines being over the 80 limits, but these warnings were already
there before moving the code around.
Also, patch 1 is not directly related to the code reorganisation, but it
was a remaining cleanup that we didn't upstream before, because it was
conflicting with another patch that has been sent for inclusion to the
net tree.
====================
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-0-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before this patch, the PM code was dispersed in different places:
- pm.c had common code for all PMs, but also Netlink specific code that
will not be needed with the future BPF path-managers.
- pm_netlink.c had common Netlink code.
To clarify the code, a reorganisation is suggested here, only by moving
code around, and small helper renaming to avoid confusions:
- pm_netlink.c now only contains common PM Netlink code:
- PM events: this code was already there
- shared helpers around Netlink code that were already there as well
- shared Netlink commands code from pm.c
- pm.c now no longer contain Netlink specific code.
- protocol.h has been updated accordingly:
- mptcp_nl_fill_addr() no longer need to be exported.
The code around the PM is now less confusing, which should help for the
maintenance in the long term.
This will certainly impact future backports, but because other cleanups
have already done recently, and more are coming to ease the addition of
a new path-manager controlled with BPF (struct_ops), doing that now
seems to be a good time. Also, many issues around the PM have been fixed
a few months ago while increasing the code coverage in the selftests, so
such big reorganisation can be done with more confidence now.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-15-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before this patch, the PM code was dispersed in different places:
- pm.c had common code for all PMs
- pm_netlink.c was supposed to be about the in-kernel PM, but also had
exported common Netlink helpers, NL events for PM userspace daemons,
etc. quite confusing.
To clarify the code, a reorganisation is suggested here, only by moving
code around to avoid confusions:
- pm_netlink.c now only contains common PM Netlink code:
- PM events: this code was already there
- shared helpers around Netlink code that were already there as well
- more shared Netlink commands code from pm.c will come after
- pm_kernel.c now contains only code that is specific to the in-kernel
PM. Now all functions are either called from:
- pm.c: events coming from the core, when this PM is being used
- pm_netlink.c: for shared Netlink commands
- mptcp_pm_gen.c: for Netlink commands specific to the in-kernel PM
- sockopt.c: for the exported counters per netns
- (while at it, a useless 'return;' spot by checkpatch at the end of
mptcp_pm_nl_set_flags_all, has been removed)
The code around the PM is now less confusing, which should help for the
maintenance in the long term.
This will certainly impact future backports, but because other cleanups
have already done recently, and more are coming to ease the addition of
a new path-manager controlled with BPF (struct_ops), doing that now
seems to be a good time. Also, many issues around the PM have been fixed
a few months ago while increasing the code coverage in the selftests, so
such big reorganisation can be done with more confidence now.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-14-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before this patch, the PM code was dispersed in different places:
- pm.c had common code for all PMs
- pm_netlink.c was supposed to be about the in-kernel PM, but also had
exported common helpers, callbacks used by the different PMs, NL
events for PM userspace daemon, etc. quite confusing.
- pm_userspace.c had userspace PM only code, but using specific
in-kernel PM helpers
To clarify the code, a reorganisation is suggested here, only by moving
code around, and (un)exporting functions:
- helpers used from both PMs and not linked to Netlink
- callbacks used by different PMs, e.g. ADD_ADDR management
- some helpers have been marked as 'static'
- protocol.h has been updated accordingly
- (while at it, a needless if before a kfree(), spot by checkpatch in
mptcp_remove_anno_list_by_saddr(), has been removed)
The code around the PM is now less confusing, which should help for the
maintenance in the long term.
This will certainly impact future backports, but because other cleanups
have already done recently, and more are coming to ease the addition of
a new path-manager controlled with BPF (struct_ops), doing that now
seems to be a good time. Also, many issues around the PM have been fixed
a few months ago while increasing the code coverage in the selftests, so
such big reorganisation can be done with more confidence now.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-13-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To make it clear what actions are in-kernel PM specific and which ones
are not and done for all PMs, e.g. sending ADD_ADDR and close associated
subflows when a RM_ADDR is received.
The behavioural is changed a bit: MPTCP_PM_ADD_ADDR_RECEIVED is now
treated after MPTCP_PM_ADD_ADDR_SEND_ACK and MPTCP_PM_RM_ADDR_RECEIVED,
but that should not change anything in practice.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-10-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When destroying an MPTCP socket, some userspace PM specific code was
called from mptcp_destroy_common() in protocol.c. That feels wrong, and
it is the only case.
Instead, the core now calls mptcp_pm_destroy() from pm.c which is now in
charge of cleaning the announced addresses list, and ask the different
PMs to do extra cleaning if needed, e.g. the userspace PM, if used, will
clean the local addresses list.
While at it, the userspace PM specific helper has been prefixed with
'mptcp_userspace_pm_' like the other ones.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-9-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, in-kernel PM specific helpers are prefixed with
'mptcp_pm_nl_'. But here 'mptcp_pm_nl_is_init_remote_addr' is not
specific to this PM: it is called from pm.c for both the in-kernel and
userspace PMs.
To avoid confusions, the '_nl' bit has been removed from the name.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-7-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, in-kernel PM specific helpers are prefixed with
'mptcp_pm_nl_'. But here 'mptcp_pm_nl_subflow_chk_stale' is not specific
to this PM: it is called from pm.c for both the in-kernel and userspace
PMs.
To avoid confusions, the '_nl' bit has been removed from the name.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-6-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, in-kernel PM specific helpers are prefixed with
'mptcp_pm_nl_'. But here 'mptcp_pm_nl_rm_addr_received' is not specific
to this PM: it is called from the PM worker, and used by both the
in-kernel and userspace PMs. The helper has been renamed to
'mptcp_pm_rm_addr_recv' instead of '_received' to avoid confusions with
the one from pm.c.
mptcp_pm_nl_rm_addr_or_subflow', and 'mptcp_pm_nl_rm_subflow_received'
have been updated too for the same reason.
To avoid confusions, the '_nl' bit has been removed from the name.
While at it, the in-kernel PM specific code has been move from
mptcp_pm_rm_addr_or_subflow to a new dedicated helper, clearer.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-5-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, in-kernel PM specific helpers are prefixed with
'mptcp_pm_nl_'. But here 'mptcp_pm_nl_work' is not specific to this PM:
it is called from the core to call helpers, some of them needed by both
the in-kernel and userspace PMs.
To avoid confusions, the '_nl' bit has been removed from the name.
Also used 'worker' instead of 'work', similar to protocol.c's worker.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-4-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following code in mptcp_userspace_pm_get_local_id() that assigns "skc"
to "new_entry" is not allowed in BPF if we use the same code to implement
the get_local_id() interface of a BFP path manager:
memset(&new_entry, 0, sizeof(struct mptcp_pm_addr_entry));
new_entry.addr = *skc;
new_entry.addr.id = 0;
new_entry.flags = MPTCP_PM_ADDR_FLAG_IMPLICIT;
To solve the issue, this patch moves this assignment to "new_entry" forward
to mptcp_pm_get_local_id(), and then passing "new_entry" as a parameter to
both mptcp_pm_nl_get_local_id() and mptcp_userspace_pm_get_local_id().
No behavioural changes intended.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-1-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This code is trying to ensure that the last byte of the buffer is a NUL
terminator. However, the problem is that attr->value[] is an array of
__le32, not char, so it zeroes out 4 bytes way beyond the end of the
buffer. Cast the buffer to char to address this.
Fixes: e5cf5107c9 ("eth: fbnic: Update fbnic_tlv_attr_get_string() to work like nla_strscpy()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Lee Trager <lee@trager.us>
Link: https://patch.msgid.link/2791d4be-ade4-4e50-9b12-33307d8410f6@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Willem de Bruijn says:
====================
follow-up on deduplicate cookie logic
1/3: I came across a leftover from cookie deduplication, due to UDP
having two code paths: lockless fast path and locked cork path.
3/3: Even though the leftover was in the fast path, this prompted me
to complete coverage to the cork path.
2/3: That uncovered a subtle API inconsistency in how dontfrag is
configured. It should not be possible to switch DF mid datagram.
====================
Link: https://patch.msgid.link/20250307033620.411611-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When spanning datagram construction over multiple send calls using
MSG_MORE, per datagram settings are configured on the first send.
That is when ip(6)_setup_cork stores these settings for subsequent use
in __ip(6)_append_data and others.
The only flag that escaped this was dontfrag. As a result, a datagram
could be constructed with df=0 on the first sendmsg, but df=1 on a
next. Which is what cmsg_ip.sh does in an upcoming MSG_MORE test in
the "diff" scenario.
Changing datagram conditions in the middle of constructing an skb
makes this already complex code path even more convoluted. It is here
unintentional. Bring this flag in line with expected sockopt/cmsg
behavior.
And stop passing ipc6 to __ip6_append_data, to avoid such issues
in the future. This is already the case for __ip_append_data.
inet6_cork had a 6 byte hole, so the 1B flag has no impact.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250307033620.411611-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As of the blamed commit ipc6.dontfrag is always initialized at the
start of udpv6_sendmsg, by ipcm6_init_sk, to either 0 or 1.
Later checks against -1 are no longer needed and the branches are now
dead code.
The blamed commit had removed those branches. But I had overlooked
this one case.
UDP has both a lockless fast path and a slower path for corked
requests. This branch remained in the fast path.
Fixes: 096208592b ("ipv6: replace ipcm6_init calls with ipcm6_init_sk")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250307033620.411611-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use netif_queue_set_napi to map NAPIs to queue IDs so that the mapping
can be accessed by user apps. Note that the netif_queue_set_napi
currently requires RTNL, so care must be taken to ensure RTNL is held on
paths where this API might be reached.
The paths in the driver where this API can be reached appear to be:
- ndo_open, ndo_close, which hold RTNL so no driver change is needed.
- rx_pause, rx_resume, tx_pause, tx_resume are reached either via
an ethtool ioctl or via XSK - neither path requires a driver change.
- power management paths (which call open and close), which have been
updated to hold/release RTNL.
$ ethtool -i ens4 | grep driver
driver: virtio_net
$ sudo ethtool -L ens4 combined 4
$ ./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/netdev.yaml \
--dump queue-get --json='{"ifindex": 2}'
[{'id': 0, 'ifindex': 2, 'napi-id': 8289, 'type': 'rx'},
{'id': 1, 'ifindex': 2, 'napi-id': 8290, 'type': 'rx'},
{'id': 2, 'ifindex': 2, 'napi-id': 8291, 'type': 'rx'},
{'id': 3, 'ifindex': 2, 'napi-id': 8292, 'type': 'rx'},
{'id': 0, 'ifindex': 2, 'type': 'tx'},
{'id': 1, 'ifindex': 2, 'type': 'tx'},
{'id': 2, 'ifindex': 2, 'type': 'tx'},
{'id': 3, 'ifindex': 2, 'type': 'tx'}]
Note that virtio_net has TX-only NAPIs which do not have NAPI IDs, so
the lack of 'napi-id' in the above output is expected.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20250307011215.266806-4-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the more esoteric helpers for netdev instance lock to
a dedicated header. This avoids growing netdevice.h to infinity
and makes rebuilding the kernel much faster (after touching
the header with the helpers).
The main netdev_lock() / netdev_unlock() functions are used
in static inlines in netdevice.h and will probably be used
most commonly, so keep them in netdevice.h.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250307183006.2312761-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
