This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
The newly added dsa driver attempts to enable the corresponding PHY driver,
but that one has additional dependencies that may not be available:
WARNING: unmet direct dependencies detected for MAXLINEAR_GPHY
Depends on [m]: NETDEVICES [=y] && PHYLIB [=y] && (HWMON [=m] || HWMON [=m]=n [=n])
Selected by [y]:
- NET_DSA_MXL862 [=y] && NETDEVICES [=y] && NET_DSA [=y]
aarch64-linux-ld: drivers/net/phy/mxl-gpy.o: in function `gpy_probe':
mxl-gpy.c:(.text.gpy_probe+0x13c): undefined reference to `devm_hwmon_device_register_with_info'
aarch64-linux-ld: drivers/net/phy/mxl-gpy.o: in function `gpy_hwmon_read':
mxl-gpy.c:(.text.gpy_hwmon_read+0x48): undefined reference to `polynomial_calc'
There is actually no compile-time dependency, as DSA correctly uses the
PHY abstractions. Remove the 'select' statement to reduce the complexity.
Fixes: 23794bec1c ("net: dsa: add basic initial driver for MxL862xx switches")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/20260216105522.2382373-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add very basic DSA driver for MaxLinear's MxL862xx switches.
In contrast to previous MaxLinear switches the MxL862xx has a built-in
processor that runs a sophisticated firmware based on Zephyr RTOS.
Interaction between the host and the switch hence is organized using a
software API of that firmware rather than accessing hardware registers
directly.
Add descriptions of the most basic firmware API calls to access the
built-in MDIO bus hosting the 2.5GE PHYs, basic port control as well as
setting up the CPU port.
Implement a very basic DSA driver using that API which is sufficient to
get packets flowing between the user ports and the CPU port.
The firmware offers all features one would expect from a modern switch
hardware, they are going to be added one by one in follow-up patch
series.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/ccde07e8cf33d8ae243000013b57cfaa2695e0a9.1770433307.git.daniel@makrotopia.org
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
David Yang is saying that struct flow_action_entry in
include/net/flow_offload.h has gained new fields and DSA's struct
dsa_mall_policer_tc_entry, derived from that, isn't keeping up.
This structure is passed to drivers and they are completely oblivious to
the values of fields they don't see.
This has happened before, and almost always the solution was to make the
DSA layer thinner and use the upstream data structures. Here, the reason
why we didn't do that is because struct flow_action_entry :: police is
an anonymous structure.
That is easily enough fixable, just name those fields "struct
flow_action_police" and reference them from DSA.
Make the according transformations to the two users (sja1105 and felix):
"rate_bytes_per_sec" -> "rate_bytes_ps".
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Co-developed-by: David Yang <mmyangfl@gmail.com>
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260206075427.44733-1-mmyangfl@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
No check for actually present hardware is being performed in the probe
function of the mxl-gsw1xx switch driver. So even if the switch isn't
present at the configured MDIO bus address the driver wrongly tells the
user that a "GSWIP version 0 mod 0" was found, outputting errors about
PHY capabilities not matching.
Read and validate the chip MANU_ID and PNUM_ID registers and output
information while probing, but return an error and abort probing in case
the hardware is not actually present.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/3194d3d3bb0b51f08755d392e1fdf7bb6dc49608.1769916962.git.daniel@makrotopia.org
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Configure SerDes (port 4) RX and TX polarities using the newly
introduced generic properties. The polarities are described at the port
level which equals the polarities of the external pins of the chip.
Note that the RX lane is inverted internally and the vendor driver
simply always sets bit GSW1XX_SGMII_PHY_RX0_CFG2_INVERT unconditionally
to end up with the correct (ie. as documented in datasheets) polarity at
the external pins.
In this sense, PHY_POLARITY_NORMAL denotes normal polarity for pins as
documented for the MRQFN 105-pin package (GSW120, GSW125, GSW140, GSW141
and GSW145 all use the same package and have identical pin layouts
except for TP port 2 and 3 being N/C on GSW12x):
pin B18 (TX0_P) positive signal of the differential SGMII data output pair
pin B19 (TX0_M) negative signal of the differential SGMII data output pair
pin B20 (RX0_P) positive signal of the differential SGMII data input pair
pin B21 (RX0_M) negative signal of the differential SGMII data input pair
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/8bf79b3476e23673fceffbe2bc9d6abc13d132e5.1769916962.git.daniel@makrotopia.org
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The Lantiq GSWIP and MaxLinear GSW1xx drivers are currently relying on a
hard-coded mapping of MII ports to their respective MII_CFG and MII_PCDU
registers and only allow applying an offset to the port index.
While this is sufficient for the currently supported hardware, the very
similar Intel GSW150 (aka. Lantiq PEB7084) cannot be described using
this arrangement.
Introduce two arrays to specify the MII_CFG and MII_PCDU registers for
each port, replacing the current bitmap used to safeguard MII ports as
well as the port index offset.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/63fc01195196384f5e244a0ce9ec2ae3a6c08fe3.1769099517.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit a18891b557 ("net: dsa: sja1105: simplify static configuration
reload") split sja1105_mac_link_up() -> sja1105_adjust_port_config()
into two separate:
- sja1105_set_port_speed()
- sja1105_set_port_config()
in order to pick up the second sja1105_set_port_config() and reuse it
for the sja1105_static_config_reload() procedure which involves saving
and restoring MAC and PCS settings.
Now that these settings are restored by phylink itself, the driver no
longer needs to call its own sja1105_set_port_config(), and the
splitting is unnatural. Merge the functions back, which is to say that
the only supported internal code path is to submit the MAC Configuration
Table entry to hardware after phylink has dictated what we should set it
to.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260119121954.1624535-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sja1105_static_config_reload() changes major settings in the switch and
it requires a reset. A use case is to change things like Qdiscs (but see
sja1105_reset_reasons[] for full list) while PTP synchronization is
running, and the servo loop must not exit the locked state (s2).
Therefore, stopping and restarting the phylink instances of all ports is
not desirable, because that also stops the phylib state machine, and
retriggers a seconds-long auto-negotiation process that breaks PTP.
Thus, saving and restoring the link management settings is handled
privately by the driver.
The method got progressively more complex as SGMII support got added,
because this is handled through the xpcs phylink_pcs component, to which
we don't have unfettered access. Nonetheless, the switch reset line is
hardwired to also reset the XPCS, creating a situation where it loses
state and needs to be reprogrammed at a moment in time outside phylink's
control.
Although commits 907476c66d ("net: dsa: sja1105: call PCS
config/link_up via pcs_ops structure") and 41bf58314b ("net: dsa:
sja1105: use phylink_pcs internally") made the sja1105 <-> xpcs
interaction slightly prettier, we still depend heavily on the PCS being
"XPCS-like", because to back up its settings, we read the MII_BMCR
register, through a mdiobus_c45_read() operation, breaking all layering
separation.
With the existence of phylink link callback replay helpers, we can do
away with all this custom code and become even more PCS-agnostic, even
though the reset domain is tightly coupled.
This creates the unique opportunity to simplify away even more code than
just the xpcs handling from sja1105_static_config_reload().
The sja1105_set_port_config() method is also invoked from
sja1105_mac_link_up(). And since that is now called directly by
phylink - we can just remove it from sja1105_static_config_reload().
This makes it possible to re-merge sja1105_set_port_speed() and
sja1105_set_port_config() in a later change.
Note that my only setups with sja1105 where the xpcs is used is with the
xpcs on the CPU-facing port (fixed-link). Thus, I cannot test xpcs + PHY.
But the replay procedure walks through all ports, and I did test a
regular RGMII user port + a PHY.
ptp4l[54.552]: master offset 5 s2 freq -931 path delay 764
ptp4l[55.551]: master offset 22 s2 freq -913 path delay 764
ptp4l[56.551]: master offset 13 s2 freq -915 path delay 765
ptp4l[57.552]: master offset 5 s2 freq -919 path delay 765
ptp4l[58.553]: master offset 13 s2 freq -910 path delay 765
ptp4l[59.553]: master offset 13 s2 freq -906 path delay 765
ptp4l[60.553]: master offset 6 s2 freq -909 path delay 765
ptp4l[61.553]: master offset 6 s2 freq -907 path delay 765
ptp4l[62.553]: master offset 6 s2 freq -906 path delay 765
ptp4l[63.553]: master offset 14 s2 freq -896 path delay 765
$ ip link set br0 type bridge vlan_filtering 1
[ 63.983283] sja1105 spi2.0 sw0p0: Link is Down
[ 63.991913] sja1105 spi2.0: Link is Down
[ 64.009784] sja1105 spi2.0: Reset switch and programmed static config. Reason: VLAN filtering
[ 64.020217] sja1105 spi2.0 sw0p0: Link is Up - 1Gbps/Full - flow control off
[ 64.030683] sja1105 spi2.0: Link is Up - 1Gbps/Full - flow control off
ptp4l[64.554]: master offset 7397 s2 freq +6491 path delay 765
ptp4l[65.554]: master offset 38 s2 freq +1352 path delay 765
ptp4l[66.554]: master offset -2225 s2 freq -900 path delay 764
ptp4l[67.555]: master offset -2226 s2 freq -1569 path delay 765
ptp4l[68.555]: master offset -1553 s2 freq -1563 path delay 765
ptp4l[69.555]: master offset -865 s2 freq -1341 path delay 765
ptp4l[70.555]: master offset -401 s2 freq -1137 path delay 765
ptp4l[71.556]: master offset -145 s2 freq -1001 path delay 765
ptp4l[72.558]: master offset -26 s2 freq -926 path delay 765
ptp4l[73.557]: master offset 30 s2 freq -877 path delay 765
ptp4l[74.557]: master offset 47 s2 freq -851 path delay 765
ptp4l[75.557]: master offset 29 s2 freq -855 path delay 765
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260119121954.1624535-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Mediatek LynxI PCS is used from the MT7530 DSA driver (where it does
not have an OF presence) and from mtk_eth_soc, where it does
(Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml
informs of a combined clock provider + SGMII PCS "SGMIISYS" syscon
block).
Currently, mtk_eth_soc parses the SGMIISYS OF node for the
"mediatek,pnswap" property and sets a bit in the "flags" argument of
mtk_pcs_lynxi_create() if set.
I'd like to deprecate "mediatek,pnswap" in favour of a property which
takes the current phy-mode into consideration. But this is only known at
mtk_pcs_lynxi_config() time, and not known at mtk_pcs_lynxi_create(),
when the SGMIISYS OF node is parsed.
To achieve that, we must pass the OF node of the PCS, if it exists, to
mtk_pcs_lynxi_create(), and let the PCS take a reference on it and
handle property parsing whenever it wants.
Use the fwnode API which is more general than OF (in case we ever need
to describe the PCS using some other format). This API should be NULL
tolerant, so add no particular tests for the mt7530 case.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260119091220.1493761-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Timestamps are directly accessed through a register read in the
interrupt handler. KSZ8463's logic to access it will be a bit more
complex because the same interrupt can be triggered by two different
timestamps being ready.
Wrap the timestamp's reading in a dedicated function to ease the
KSZ8463's integration in upcoming patches.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260105-ksz-rework-v1-9-a68df7f57375@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Accesses to the PTP_MSG_CONF1 register are done through a hardcoded
address which doesn't match with the KSZ8463's register layout.
Add a new entry for the PTP_MSG_CONF1 register in the regs[] tables.
Use the regs[] table to retrieve the PTP_MSG_CONF1 register address
when accessing it.
Remove the macro defining the address to prevent further use.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260105-ksz-rework-v1-8-a68df7f57375@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Accesses to the PTP_SUBNANOSEC_RATE register are done through a
hardcoded address which doesn't match with the KSZ8463's register
layout.
Add a new entry for the PTP_SUBNANOSEC_RATE register in the regs[]
tables.
Use the regs[] table to retrieve the PTP_SUBNANOSEC_RATE register
address when accessing it.
Remove the macro defining the address to prevent further use.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260105-ksz-rework-v1-7-a68df7f57375@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Accesses to the PTP_RTC_SUB_NANOSEC register are done through a
hardcoded address which doesn't match with the KSZ8463's register
layout.
Add a new entry for the PTP_RTC_SUB_NANOSEC register in the regs[]
tables.
Use the regs[] table to retrieve the PTP_RTC_SUB_NANOSEC register
address when accessing it.
Remove the macro defining the address to prevent further use.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260105-ksz-rework-v1-6-a68df7f57375@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Accesses to the PTP_RTC_SEC register are done through a hardcoded
address which doesn't match with the KSZ8463's register layout.
Add a new entry for the PTP_RTC_SEC register in the regs[] tables.
Use the regs[] table to retrieve the PTP_RTC_SEC register address
when accessing it.
Remove the macro defining the address to prevent further use.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260105-ksz-rework-v1-5-a68df7f57375@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Accesses to the PTP_RTC_NANOSEC register are done through a hardcoded
address which doesn't match with the KSZ8463's register layout.
Add a new entry for the PTP_RTC_NANOSEC register in the regs[] tables.
Use the regs[] table to retrieve the PTP_RTC_NANOSEC register address
when accessing it.
Remove the macro defining the address to prevent further use.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260105-ksz-rework-v1-4-a68df7f57375@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Accesses to the PTP_CLK_CTRL register are done through a hardcoded
address which doesn't match with the KSZ8463's register layout.
Add a new entry for the PTP_CLK_CTRL register in the regs[] tables.
Use the regs[] table to retrieve the PTP_CLK_CTRL register address
when accessing it.
Remove the macro defining the address to prevent further use.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260105-ksz-rework-v1-3-a68df7f57375@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The IRQ logic of the KSZ8463 differs from that of other KSZ switches.
It doesn't have a 'mask' register but an 'enable' one instead. The
common IRQ framework can still be used though as soon as we reverse
the logic (using '1' to enable interrupts instead of '0') for KSZ8463
cases.
Move the initialization of the kirq->masked outside of
ksz_irq_common_setup() to keep this function truly common when
IRQ support for the KSZ8463 is added.
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Link: https://patch.msgid.link/20260105-ksz-rework-v1-1-a68df7f57375@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This reverts commit 926eae6044, which
never could have produced the intended effect:
https://lore.kernel.org/netdev/AM0PR06MB10396BBF8B568D77556FC46F8F7DEA@AM0PR06MB10396.eurprd06.prod.outlook.com/
The reason why it is broken beyond repair in this form is that the
mv88e6xxx driver outsources its "tx-p2p-microvolt" property to the OF
node of an external Ethernet PHY. This:
(a) does not work if there is no external PHY (chip-to-chip connection,
or SFP module)
(b) pollutes the OF property namespace / bindings of said external PHY
("tx-p2p-microvolt" could have meaning for the Ethernet PHY's SerDes
interface as well)
We can revisit the idea of making SerDes amplitude configurable once we
have proper bindings for the mv88e6xxx SerDes. Until then, remove the
code that leaves us with unnecessary baggage.
Fixes: 926eae6044 ("dsa: mv88e6xxx: make serdes SGMII/Fiber tx amplitude configurable")
Cc: Holger Brunck <holger.brunck@hitachienergy.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260104093952.486606-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
port_fdb_dump() is supposed to only add fdb entries, but we iterate over
the full ARL table, which also includes multicast entries.
So check if the entry is a multicast entry before passing it on to the
callback().
Additionally, the port of those entries is a bitmask, not a port number,
so any included entries would have even be for the wrong port.
Fixes: 1da6df85c6 ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20251217205756.172123-1-jonas.gorski@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Despite being documented as self-clearing, the RANEG bit sometimes
remains set, preventing auto-negotiation from happening.
Manually clear the RANEG bit after 10ms as advised by MaxLinear.
In order to not hold RTNL during the 10ms of waiting schedule
delayed work to take care of clearing the bit asynchronously, which
is similar to the self-clearing behavior.
Fixes: 22335939ec ("net: dsa: add driver for MaxLinear GSW1xx switch family")
Reported-by: Rasmus Villemoes <ravi@prevas.dk>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/76745fceb5a3f53088110fb7a96acf88434088ca.1765241054.git.daniel@makrotopia.org
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The .shutdown operation should call dsa_switch_shutdown() just like
it is done also by the sibling lantiq_gswip driver. Not doing that
results in shutdown or reboot hanging and waiting for the CPU port
becoming free, which introduces a longer delay and a WARNING before
shutdown or reboot in case the driver is built-into the kernel.
Fix this by calling dsa_switch_shutdown() in the driver's shutdown
operation, harmonizing it with what is done in the lantiq_gswip
driver. As a side-effect this now allows to remove the previously
exported gswip_disable_switch() function which no longer got any
users.
Fixes: 22335939ec ("net: dsa: add driver for MaxLinear GSW1xx switch family")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/77ed91a5206e5dbf5d3e83d7e364ebfda90d31fd.1765241054.git.daniel@makrotopia.org
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The driver's .remove operation was calling gswip_disable_switch() which
clears the GSWIP_MDIO_GLOB_ENABLE bit before calling
dsa_unregister_switch() and thereby violating a Golden Rule of driver
development to always unpublish userspace interfaces before disabling
hardware, as pointed out by Russell King.
Fix this by relying in GSWIP_MDIO_GLOB_ENABLE being cleared by the
.teardown operation introduced by the previous commit
("net: dsa: lantiq_gswip: fix teardown order").
Fixes: 22335939ec ("net: dsa: add driver for MaxLinear GSW1xx switch family")
Suggested-by: "Russell King (Oracle)" <linux@armlinux.org.uk>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/63f882eeb910cf24503c35a443b541cc54a930f2.1765241054.git.daniel@makrotopia.org
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Russell King pointed out that disabling the switch by clearing
GSWIP_MDIO_GLOB_ENABLE before calling dsa_unregister_switch() is
problematic, as it violates a Golden Rule of driver development to
always first unpublish userspace interfaces and then disable the
hardware.
Fix this, and also simplify the probe() function, by introducing a
dsa_switch_ops teardown() operation which takes care of clearing the
GSWIP_MDIO_GLOB_ENABLE bit.
Fixes: 14fceff477 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Suggested-by: "Russell King (Oracle)" <linux@armlinux.org.uk>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/4ebd72a29edc1e4059b9666a26a0bb5d906a829a.1765241054.git.daniel@makrotopia.org
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
Pull printk updates from Petr Mladek:
- Allow creaing nbcon console drivers with an unsafe write_atomic()
callback that can only be called by the final nbcon_atomic_flush_unsafe().
Otherwise, the driver would rely on the kthread.
It is going to be used as the-best-effort approach for an
experimental nbcon netconsole driver, see
https://lore.kernel.org/r/20251121-nbcon-v1-2-503d17b2b4af@debian.org
Note that a safe .write_atomic() callback is supposed to work in NMI
context. But some networking drivers are not safe even in IRQ
context:
https://lore.kernel.org/r/oc46gdpmmlly5o44obvmoatfqo5bhpgv7pabpvb6sjuqioymcg@gjsma3ghoz35
In an ideal world, all networking drivers would be fixed first and
the atomic flush would be blocked only in NMI context. But it brings
the question how reliable networking drivers are when the system is
in a bad state. They might block flushing more reliable serial
consoles which are more suitable for serious debugging anyway.
- Allow to use the last 4 bytes of the printk ring buffer.
- Prevent queuing IRQ work and block printk kthreads when consoles are
suspended. Otherwise, they create non-necessary churn or even block
the suspend.
- Release console_lock() between each record in the kthread used for
legacy consoles on RT. It might significantly speed up the boot.
- Release nbcon context between each record in the atomic flush. It
prevents stalls of the related printk kthread after it has lost the
ownership in the middle of a record
- Add support for NBCON consoles into KDB
- Add %ptsP modifier for printing struct timespec64 and use it where
possible
- Misc code clean up
* tag 'printk-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (48 commits)
printk: Use console_is_usable on console_unblank
arch: um: kmsg_dump: Use console_is_usable
drivers: serial: kgdboc: Drop checks for CON_ENABLED and CON_BOOT
lib/vsprintf: Unify FORMAT_STATE_NUM handlers
printk: Avoid irq_work for printk_deferred() on suspend
printk: Avoid scheduling irq_work on suspend
printk: Allow printk_trigger_flush() to flush all types
tracing: Switch to use %ptSp
scsi: snic: Switch to use %ptSp
scsi: fnic: Switch to use %ptSp
s390/dasd: Switch to use %ptSp
ptp: ocp: Switch to use %ptSp
pps: Switch to use %ptSp
PCI: epf-test: Switch to use %ptSp
net: dsa: sja1105: Switch to use %ptSp
mmc: mmc_test: Switch to use %ptSp
media: av7110: Switch to use %ptSp
ipmi: Switch to use %ptSp
igb: Switch to use %ptSp
e1000e: Switch to use %ptSp
...
