The purpose of those assigned-clock-* properties is to configure clock for
for the I2S device so move them to respective node.
This suppresses the dtbs_check warning:
arch/arm/boot/dts/exynos5422-odroidxu3.dt.yaml: sound: 'clocks' is a dependency of 'assigned-clocks'
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Use the 32 kHz clock from S2MPS11 PMIC in the S3C RTC node. Except
making the S3C RTC working, this also fixes dtbs_check warnings:
arch/arm/boot/dts/exynos5420-smdk5420.dt.yaml: rtc@101e0000: clocks: [[2, 317]] is too short
arch/arm/boot/dts/exynos5420-smdk5420.dt.yaml: rtc@101e0000: clock-names: ['rtc'] is too short
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200901075417.22481-14-krzk@kernel.org
The pin configuration of Display Port HPD GPIO emds with '-gpio' which
confuses dtschema:
arch/arm/boot/dts/exynos5250-spring.dt.yaml: pinctrl@11400000: dp-hpd-gpio:
{'samsung,pins': ['gpc3-0'], ... 'samsung,pin-drv': [[0]], 'phandle': [[23]]} is not of type 'array'
From schema: lib/python3.6/site-packages/dtschema/schemas/gpio/gpio-consumer.yaml
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200901075417.22481-11-krzk@kernel.org
Use the 32 kHz clock from S5M8767 PMIC in the S3C RTC node. Except
making the S3C RTC working, this also fixes dtbs_check warnings:
arch/arm/boot/dts/exynos5250-spring.dt.yaml: rtc@101e0000: clocks: [[2, 337]] is too short
arch/arm/boot/dts/exynos5250-spring.dt.yaml: rtc@101e0000: clock-names: ['rtc'] is too short
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200901075417.22481-10-krzk@kernel.org
Add clock-cells to max77686 PMIC node so its 32 kHz clocks could be used
later in the S3C RTC node. Except making the S3C RTC working, this also
fixes dtbs_check warnings:
arch/arm/boot/dts/exynos5250-smdk5250.dt.yaml: rtc@101e0000: clocks: [[2, 337]] is too short
arch/arm/boot/dts/exynos5250-smdk5250.dt.yaml: rtc@101e0000: clock-names: ['rtc'] is too short
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200901075417.22481-9-krzk@kernel.org
Using full paths to extend or override a device tree node is error prone
since if there was a typo error, a new node will be created instead of
extending the node as it was desired. This will lead to run-time errors
that could be hard to detect.
A mistyped label on the other hand, will cause a dtc compile error
(during build time).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200901075417.22481-8-krzk@kernel.org
The name of I2C controller over GPIO lines node ends with '-gpio' which
confuses dtschema:
arch/arm/boot/dts/exynos5250-arndale.dt.yaml: soc: i2c-gpio:
{'pinctrl-names': ['default'], ... 'phandle': [[65]]} is not of type 'array'
From schema: lib/python3.6/site-packages/dtschema/schemas/gpio/gpio-consumer.yaml
Add a '-10' (there are already 0-9 I2C controllers on the SoC) suffix to
silence it. This pattern on naming i2c-gpio is already present in many
other dts. No functional change.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200901075417.22481-6-krzk@kernel.org
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC.
However the PMIC is not described in DTS at all so at least add
a workaround to model its clock with a fixed-clock. This fixes S3C RTC
and silences dtbs_check warnings like:
arch/arm/boot/dts/exynos5410-smdk5410.dt.yaml: rtc@101e0000: clocks: [[5, 317]] is too short
arch/arm/boot/dts/exynos5410-smdk5410.dt.yaml: rtc@101e0000: clock-names: ['rtc'] is too short
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200901075417.22481-5-krzk@kernel.org
The Exynos5260 GIC node does not have any children so remove the address
and size cells as they are not needed by DT bindings. The size-cells of
'0' were also incorrect. This fixes dtbs_check warning:
arch/arm/boot/dts/exynos5260-xyref5260.dt.yaml: interrupt-controller@10481000: #size-cells:0:0: 1 was expected
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200901075417.22481-4-krzk@kernel.org
Exynos5260 SoCs have ARM GIC 400. Correct the compatibles to match
dtschema and fix the dtbs_check warnings like:
arch/arm/boot/dts/exynos5260-xyref5260.dt.yaml: interrupt-controller@10481000:
compatible: ['arm,cortex-a15-gic', 'arm,cortex-a9-gic'] is not valid under any of the given schemas
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200901075417.22481-3-krzk@kernel.org
Exynos5250 and Exynso54xx SoCs have ARM GIC 400. Correct the
compatibles to match dtschema and fix the dtbs_check warnings like:
arch/arm/boot/dts/exynos5420-peach-pit.dt.yaml: interrupt-controller@10481000:
compatible: ['arm,gic-400', 'arm,cortex-a15-gic', 'arm,cortex-a9-gic']
is not valid under any of the given schemas
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200901075417.22481-2-krzk@kernel.org
Both the Galaxy S and the Fascinate4G have a WM8994 codec, but they
differ slightly in their jack detection and micbias configuration.
Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC.
However the PMIC is not described in DTS at all so at least add a
workaround to model its clock with fixed-clock. This fixes S3C RTC and
silences dtbs_check warnings like:
arch/arm/boot/dts/exynos4412-tiny4412.dt.yaml: rtc@10070000: clocks: [[7, 346]] is too short
arch/arm/boot/dts/exynos4412-tiny4412.dt.yaml: rtc@10070000: clock-names: ['rtc'] is too short
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-32-krzk@kernel.org
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC.
However the PMIC is not described in DTS at all so at least add a
workaround to model its clock with fixed-clock and silence dtbs_check
warnings like:
arch/arm/boot/dts/exynos4412-smdk4412.dt.yaml: rtc@10070000: clocks: [[7, 346]] is too short
arch/arm/boot/dts/exynos4412-smdk4412.dt.yaml: rtc@10070000: clock-names: ['rtc'] is too short
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-31-krzk@kernel.org
Using full paths to extend or override a device tree node is error prone
since if there was a typo error, a new node will be created instead of
extending the node as it was desired. This will lead to run-time errors
that could be hard to detect.
A mistyped label on the other hand, will cause a dtc compile error
(during build time).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-27-krzk@kernel.org
Using full paths to extend or override a device tree node is error prone
since if there was a typo error, a new node will be created instead of
extending the node as it was desired. This will lead to run-time errors
that could be hard to detect.
A mistyped label on the other hand, will cause a dtc compile error
(during build time).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-26-krzk@kernel.org
Add node for clock controller of Samsung S5M8767 PMIC. This provides
the 32768 Hz clock required by S3C RTC. Except making the S3C RTC
working, this also fixes dtbs_check warnings:
arch/arm/boot/dts/exynos4412-origen.dt.yaml: rtc@10070000: clocks: [[7, 346]] is too short
arch/arm/boot/dts/exynos4412-origen.dt.yaml: rtc@10070000: clock-names: ['rtc'] is too short
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-25-krzk@kernel.org
The fixed clocks implemented by Samsung clock drivers use only one
compatible so drop the additional "fixed-clock" to fix dtbs_check
warnings like:
arch/arm/boot/dts/exynos4412-i9300.dt.yaml: xxti: compatible:0: 'fixed-clock' was expected
From schema: Documentation/devicetree/bindings/clock/fixed-clock.yaml
arch/arm/boot/dts/exynos4412-i9300.dt.yaml: xxti: compatible: ['samsung,clock-xxti', 'fixed-clock'] is too long
arch/arm/boot/dts/exynos4412-i9300.dt.yaml: xxti: compatible: Additional items are not allowed ('fixed-clock' was unexpected)
arch/arm/boot/dts/exynos4412-i9300.dt.yaml: xxti: '#clock-cells' is a required property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-24-krzk@kernel.org
Align the name of mag-mhl-gpio node to avoid dtschema confusion and
dtbs_check warning:
arch/arm/boot/dts/exynos4210-i9100.dt.yaml: pinctrl@11000000: mag-mhl-gpio:
{'samsung,pins': ['gpd0-2'], 'samsung,pin-function': [[3]], 'samsung,pin-pud': [[0]]} is not of type 'array'
From schema: dtschema/schemas/gpio/gpio-consumer.yaml
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-22-krzk@kernel.org
Using full paths to extend or override a device tree node is error prone
since if there was a typo error, a new node will be created instead of
extending the node as it was desired. This will lead to run-time errors
that could be hard to detect.
A mistyped label on the other hand, will cause a dtc compile error
(during build time).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-18-krzk@kernel.org
Using full paths to extend or override a device tree node is error prone
since if there was a typo error, a new node will be created instead of
extending the node as it was desired. This will lead to run-time errors
that could be hard to detect.
A mistyped label on the other hand, will cause a dtc compile error
(during build time).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-17-krzk@kernel.org
Using full paths to extend or override a device tree node is error prone
since if there was a typo error, a new node will be created instead of
extending the node as it was desired. This will lead to run-time errors
that could be hard to detect.
A mistyped label on the other hand, will cause a dtc compile error
(during build time).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-16-krzk@kernel.org
The device tree schema expects SPI controller to be named "spi",
otherwise dtbs_check complain with a warning like:
arch/arm/boot/dts/exynos4210-i9100.dt.yaml: spi-lcd:
$nodename:0: 'spi-lcd' does not match '^spi(@.*|-[0-9a-f])*$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-15-krzk@kernel.org
The device tree schema expects SPI controller to be named "spi",
otherwise dtbs_check complain with a warning like:
arch/arm/boot/dts/exynos4210-universal_c210.dt.yaml: spi-lcd:
$nodename:0: 'spi-lcd' does not match '^spi(@.*|-[0-9a-f])*$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-13-krzk@kernel.org
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC.
However there is no clock provided for the PMIC and the driver registers
the clock as regulator. This is an old driver which will not be updated
so add a workaround - a fixed-clock to fill missing clock phandle
reference in S3C RTC.
This allows to enable the S3C RTC and fixes dtbs_check warnings:
arch/arm/boot/dts/exynos4210-smdkv310.dt.yaml: rtc@10070000: clocks: [[5, 346]] is too short
arch/arm/boot/dts/exynos4210-smdkv310.dt.yaml: rtc@10070000: clock-names: ['rtc'] is too short
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-7-krzk@kernel.org
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC.
However there is no clock provided for the PMIC and the driver registers
the clock as regulator. This is an old driver which will not be updated
so add a workaround - add a fixed-clock to fill missing clock phandle
reference in S3C RTC. The "clock" regulator in PMIC is already present
and enabled.
This allows to enable the S3C RTC and fixes dtbs_check warnings:
arch/arm/boot/dts/exynos4210-universal_c210.dt.yaml: rtc@10070000: clocks: [[5, 346]] is too short
arch/arm/boot/dts/exynos4210-universal_c210.dt.yaml: rtc@10070000: clock-names: ['rtc'] is too short
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200830135200.24304-6-krzk@kernel.org
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC
(Maxim MAX8997). However there is no clock provided for the PMIC and
the driver registers the clock as regulator. This is an old driver
which will not be updated so add a workaround:
1. Enable the "clock" regulator in PMIC,
2. Add a fixed-clock to fill missing clock phandle reference in S3C RTC.
This allows to enable the S3C RTC and fixes dtbs_check warnings:
arch/arm/boot/dts/exynos4210-trats.dt.yaml: rtc@10070000: clocks: [[5, 346]] is too short
arch/arm/boot/dts/exynos4210-trats.dt.yaml: rtc@10070000: clock-names: ['rtc'] is too short
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200830135200.24304-5-krzk@kernel.org
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC
(Maxim MAX8997). However there is no clock provided for the PMIC and
the driver registers the clock as regulator. This is an old driver
which will not be updated so add a workaround:
1. Enable the "clock" regulator in PMIC,
2. Add a fixed-clock to fill missing clock phandle reference in S3C RTC.
This allows to enable the S3C RTC and fixes dtbs_check warnings:
arch/arm/boot/dts/exynos4210-origen.dt.yaml: rtc@10070000: clocks: [[5, 346]] is too short
arch/arm/boot/dts/exynos4210-origen.dt.yaml: rtc@10070000: clock-names: ['rtc'] is too short
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200830135200.24304-4-krzk@kernel.org
The S3C RTC requires 32768 Hz clock as input which is provided by PMIC
(Maxim MAX8997). However there is no clock provided for the PMIC and
the driver registers the clock as regulator. This is an old driver
which will not be updated so add a workaround:
1. Enable the "clock" regulator in PMIC,
2. Add a fixed-clock to fill missing clock phandle reference in S3C RTC.
This allows to enable the S3C RTC and fixes dtbs_check warnings:
arch/arm/boot/dts/exynos4210-i9100.dt.yaml: rtc@10070000: clocks: [[5, 346]] is too short
arch/arm/boot/dts/exynos4210-i9100.dt.yaml: rtc@10070000: clock-names: ['rtc'] is too short
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-3-krzk@kernel.org
The name of I2C controller over GPIO lines node ends with '-gpio' which
confuses dtschema:
/arch/arm/boot/dts/exynos4210-i9100.dt.yaml: /: i2c-gpio:
{'compatible': ['i2c-gpio'], ... 'maxim,over-volt': [[4500]]}} is not of type 'array'
From schema: lib/python3.6/site-packages/dtschema/schemas/gpio/gpio-consumer.yaml
Add a '-0' suffix to silence it. This pattern on naming i2c-gpio is
already present in many other dts. No functional change.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200830135200.24304-1-krzk@kernel.org
The binding for DesignWare HS OTG USB 2.0 in Samsung SoCs take only one
compatible. This fixes dtbs_check warnings like:
arch/arm/boot/dts/exynos3250-artik5-eval.dt.yaml: hsotg@12480000:
compatible: ['samsung,s3c6400-hsotg', 'snps,dwc2'] is not valid under any of the given schemas (Possible causes of the failure):
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200829172532.29358-4-krzk@kernel.org
The fixed clocks are kept under dedicated node fixed-rate-clocks, thus a
fake "reg" was added. This is not correct with dtschema as fixed-clock
binding does not have a "reg" property:
arch/arm/boot/dts/exynos3250-artik5-eval.dt.yaml: clock@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20200829172532.29358-2-krzk@kernel.org
Add the devicetree properties to enable instruction and data prefetch
on exynos4210 and exynos4412 which use the L2C-310 cache. No other
Exynos chip appears to be using this L2 cache hardware.
This follows the default bits being set in the l2c_aux_val register
for the Exynos platform, which can now be cleared as a result.
Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The PMU (Power Management Unit) driver is a clkout clock provider (for
clock signal monitoring) only for certain Exynos SoCs. It was never
implemented for Exynos5260 and Exynos7. This fixes dtschema validator
warnings like:
system-controller@105c0000: '#clock-cells' is a required property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Update the never-mainlined "samsung,trats2-audio" binding and instead
use the new "samsung,midas-audio" binding.
Signed-off-by: Simon Shields <simon@lineageos.org>
[s.nawrocki: fixed DAPM routing entries for MICBIAS1/2, adjusted to
new cpu/codec binding, corrected the regulator nodes indexing]
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Pull io_uring fixes from Jens Axboe:
"A few differerent things in here.
Seems like syzbot got some more io_uring bits wired up, and we got a
handful of reports and the associated fixes are in here.
General fixes too, and a lot of them marked for stable.
Lastly, a bit of fallout from the async buffered reads, where we now
more easily trigger short reads. Some applications don't really like
that, so the io_read() code now handles short reads internally, and
got a cleanup along the way so that it's now easier to read (and
documented). We're now passing tests that failed before"
* tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block:
io_uring: short circuit -EAGAIN for blocking read attempt
io_uring: sanitize double poll handling
io_uring: internally retry short reads
io_uring: retain iov_iter state over io_read/io_write calls
task_work: only grab task signal lock when needed
io_uring: enable lookup of links holding inflight files
io_uring: fail poll arm on queue proc failure
io_uring: hold 'ctx' reference around task_work queue + execute
fs: RWF_NOWAIT should imply IOCB_NOIO
io_uring: defer file table grabbing request cleanup for locked requests
io_uring: add missing REQ_F_COMP_LOCKED for nested requests
io_uring: fix recursive completion locking on oveflow flush
io_uring: use TWA_SIGNAL for task_work uncondtionally
io_uring: account locked memory before potential error case
io_uring: set ctx sq/cq entry count earlier
io_uring: Fix NULL pointer dereference in loop_rw_iter()
io_uring: add comments on how the async buffered read retry works
io_uring: io_async_buf_func() need not test page bit
