ARM: tegra: Device tree changes for v5.16-rc1
This contains various cleanup patches to 32-bit ARM Tegra device trees
and enables USB OTG mode on the Nexus 7.
* tag 'tegra-for-5.16-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Remove useless usb-ehci compatible string
ARM: tegra: Remove unused backlight-boot-off property
ARM: tegra: nexus7: Enable USB OTG mode
ARM: tegra: Add new properties to USB PHY device-tree nodes
ARM: tegra: Update Broadcom Bluetooth device-tree nodes
ARM: tegra: acer-a500: Correct compatible of ak8975 magnetometer
Link: https://lore.kernel.org/r/20211008201132.1678814-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The patch uses the "dt-bindings/clock/sprd,ums512-clk.h header, which
is not merged yet. This caused a build regression, and it means the
patch was not ready to get merged anyway.
This reverts commit 23410de579.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
AT91 DT #1 for 5.16:
- Addition of a new variant in the sama5d2 family: the sama5d29 with
significant updates being CAN and Ethernet controllers;
- Add support for Exegin Q5xR5 and CalAmp LMU5000 boards which were
maintained up to this moment, separately, in OpenWrt tree;
- Two more boards gained I2C bus recovery support;
- Tse850 updated with one Ethernet fix;
- Sama7g5ek gained ADC nodes and sama5d27_wlsom1 WiFi support.
* tag 'at91-dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: dts: sama5d29: Add dtsi file for sama5d29
ARM: dts: at91-sama5d2_icp.dts: Added I2C bus recovery support
ARM: dts: at91: tse850: the emac<->phy interface is rmii
ARM: dts: at91: add Exegin Q5xR5 board
dt-bindings: ARM: at91: document exegin q5xr5 board
dt-bindings: add vendor prefix for exegin
ARM: dts: at91: add CalAmp LMU5000 board
dt-bindings: ARM: at91: document CalAmp LMU5000 board
dt-bindings: add vendor prefix for calamp
ARM: dts: at91: at91sam9260: add pinctrl label
ARM: dts: at91-sama5d27_som1_ek: Added I2C bus recovery support
ARM: dts: at91: sama7g5ek: enable ADC on the board
ARM: dts: at91: sama7g5: add node for the ADC
ARM: dts: at91: sama5d27_wlsom1: add wifi device
Link: https://lore.kernel.org/r/20211011123438.16562-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Devicetree changes for omaps for v5.16
These changes configure devices for am335x and dra7, and fixes
various devicetree check warnings for gta04:
- Update am335x-pocketbeagle to use pinconf-single
- A series of devicetree warning fixes for omap3 and gta04
- Configure bb2d Vivante GC 2D Accelerator for dra7
* tag 'omap-for-v5.16/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: dra7: add entry for bb2d module
arm: dts: omap3-gta04: cleanup led node names
arm: dts: omap3-gta04a4: accelerometer irq fix
arm: dts: omap3-gta04a5: fix missing sensor supply
arm: dts: omap3-gta04: fix missing sensor supply
arm: dts: omap3-gta04: cleanup LCD definition
ARM: dts: omap3: fix cpu thermal label name
ARM: dts: am335x-pocketbeagle: switch to pinconf-single
Link: https://lore.kernel.org/r/pull-1633950030-501948@atomide.com-3
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
arm64: tegra: Device tree changes for v5.16-rc1
This enables additional interrupts on the Tegra194 GPIO controller for
better load balancing and/or virtualization, adds audio support on
Jetson TX2 NX, enables the NVDEC video decoder on Tegra186 and later and
enables more audio processors that are found on Tegra210 and later.
Various cleanups across the board top things off.
* tag 'tegra-for-5.16-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Fix pcie-ep DT nodes
arm64: tegra: Remove useless usb-ehci compatible string
arm64: tegra: Extend APE audio support on Jetson platforms
arm64: tegra: Add few AHUB devices for Tegra210 and later
arm64: tegra: Remove unused backlight-boot-off property
arm64: tegra: Add NVDEC to Tegra186/194 device trees
arm64: tegra: Add new USB PHY properties on Tegra132
arm64: tegra: Update HDA card name on Jetson TX2 NX
arm64: tegra: Audio graph sound card for Jetson TX2 NX
arm64: tegra: Add additional GPIO interrupt entries on Tegra194
Link: https://lore.kernel.org/r/20211008201132.1678814-7-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
dt-bindings: Changes for v5.16-rc1
This contains the DT bindings for the NVDEC hardware video decoder found
on Tegra210 and later chips as well as a node name fix for the examples
in the Tegra194 PCIe controller (endpoint mode) DT bindings.
* tag 'tegra-for-5.16-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: PCI: tegra194: Fix PCIe endpoint node names
dt-bindings: Add YAML bindings for NVDEC
Link: https://lore.kernel.org/r/20211008201132.1678814-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
As defined by Documentation/devicetree/bindings/pci/pci-ep.yaml,
PCIe endpoints match this pattern:
properties:
$nodename:
pattern: "^pcie-ep@"
Change the existing ones in the DT bindings examples to avoid warnings
during DT bindings validation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
As defined by Documentation/devicetree/bindings/pci/pci-ep.yaml,
PCIe endpoints match this pattern:
properties:
$nodename:
pattern: "^pcie-ep@"
Change the existing ones in order to avoid those warnings:
arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0001.dt.yaml: pcie_ep@14160000: $nodename:0: 'pcie_ep@14160000' does not match '^pcie-ep@'
From schema: Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0001.dt.yaml: pcie_ep@14180000: $nodename:0: 'pcie_ep@14180000' does not match '^pcie-ep@'
From schema: Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0001.dt.yaml: pcie_ep@141a0000: $nodename:0: 'pcie_ep@141a0000' does not match '^pcie-ep@'
From schema: Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dt.yaml: pcie_ep@14160000: $nodename:0: 'pcie_ep@14160000' does not match '^pcie-ep@'
From schema: Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dt.yaml: pcie_ep@14180000: $nodename:0: 'pcie_ep@14180000' does not match '^pcie-ep@'
From schema: Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
arch/arm64/boot/dts/nvidia/tegra194-p3509-0000+p3668-0000.dt.yaml: pcie_ep@141a0000: $nodename:0: 'pcie_ep@141a0000' does not match '^pcie-ep@'
From schema: Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dt.yaml: pcie_ep@14160000: $nodename:0: 'pcie_ep@14160000' does not match '^pcie-ep@'
From schema: Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dt.yaml: pcie_ep@14180000: $nodename:0: 'pcie_ep@14180000' does not match '^pcie-ep@'
From schema: Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dt.yaml: pcie_ep@141a0000: $nodename:0: 'pcie_ep@141a0000' does not match '^pcie-ep@'
From schema: Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
There's no such thing as a generic USB EHCI controller. The EHCI
controllers found on Tegra SoCs are instantiations that need Tegra-
specific glue to work properly, so drop the generic compatible string
and keep only the Tegra-specific ones.
Signed-off-by: Thierry Reding <treding@nvidia.com>
There's no such thing as a generic USB EHCI controller. The EHCI
controllers found on Tegra SoCs are instantiations that need Tegra-
specific glue to work properly, so drop the generic compatible string
and keep only the Tegra-specific ones.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Extend APE audio support by adding more audio components such as SFC,
MVC, AMX, ADX and Mixer. These components can be plugged into an audio
path and required processing can be done. ASoC audio-graph based sound
driver is used to facilitate this and thus extend sound bindings as
well.
The components in the path may require different PCM parameters (such
as sample rate, channels or sample size). Depending on the pre-defined
audio paths, these can be statically configured with "convert-xxx" DT
properties in endpoint subnode. The support for the rate and channel
conversion is already available in generic audio-graph driver. Sample
size conversion support can be added based on the need in future.
The support is extended for following platforms:
* Jertson TX1
* Jetson Nano
* Jetson TX2
* Jetson AGX Xavier
* Jetson Xavier NX
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a device tree node for NVDEC on Tegra186, and
device tree nodes for NVDEC and NVDEC1 on Tegra194.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add YAML device tree bindings for NVDEC, now in a more appropriate
place compared to the old textual Host1x bindings.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
BB2D is a Vivante GC 2D Accelerator.
This adds the node to the dts file within a target module node.
Crossbar index number is used for interrupt mapping.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Fix typo in pinctrl. It did only work because the bootloader
seems to have initialized it.
Fixes: ee32711195 ("ARM: dts: omap3-gta04: Define and use bma180 irq pin")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add mandatory supply properties. The supply is always on, so it is just
a syntax issue, no functional change.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add mandatory supply properties. The supply is always on, so it is just
a syntax issue, no functional change.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Replace depreciated nodenames, fix label name to match scheme.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Hyphens should be used in label names. make dtbs_check complains
about that since it does not match the corresponding pattern
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Switch the compatible for the am33xx_pinmux pin controller node from
pinctrl-single to pinconf-single. The only change between these two
compatibles is that PCS_HAS_PINCONF will be true. This then allows
pinconf properties to be utilized.
The purpose of this change is to allow the PocketBeagle to use:
pinctrl-single,bias-pullup
pinctrl-single,bias-pulldown
This dts already defines these properites for gpio pins in the default
pinctrl state but it has no effect unless PCS_HAS_PINCONF is set.
The bias properties can then be modified on the corresponding gpio lines
through the gpiod uapi. The mapping between the pins and gpio lines is
defined by gpio-ranges under the gpio controller nodes in am33xx-l4.dtsi
Signed-off-by: Drew Fustini <drew@pdp7.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Renesas DT binding updates for v5.16
- Document support for the new R-Car H3e, M3e, M3Ne(-2G), D3e, E3e, and
H3Ne SoCs and boards.
* tag 'renesas-dt-bindings-for-v5.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: arm: renesas: Document more R-Car Gen3e Socs and boards
Link: https://lore.kernel.org/r/cover.1633081158.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ADC-keys for the mk808 board and a number of further cleanups
to make dt-schema happier.
* tag 'v5.16-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: swap timer clock-names
ARM: dts: rockchip: add more angle brackets to operating-points property on rk3066a
ARM: dts: rockchip: rename opp-table node names
ARM: dts: rockchip: change rv1108 gmac nodename
ARM: dts: rockchip: add adc-keys node to rk3066a-mk808
Link: https://lore.kernel.org/r/5121280.Lt9SDvczpP@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This contains the parts that were originally meant for 5.15 + some
new thing:
New boards: Firefly roc-rk3399-pc-pls and rk3328-pc; Scarlet-Dumo
tablet variant; Rock Pi 4 A+, B+; Pine64 Quartz64-A (rk3566-based)
Big additions for the rk3568: tsadc; saradc; gpio-support; gmac 1+2;
watchdog; pmu; io-domains and enabling these new things on the
rk3568-evb.
Addition of the rk3566 - a variant of the rk3568 with slightly less
peripherals.
SFC (serial flash controller) for rk3308 and px30 (including the
Odroid Go2)
Support for the rk3399's second image signal processor and its coresight
component. And camera + vpu support on px30.
A number of smaller additions to multiple boards (Rock Pi 4, Pinebook Pro
and helios64, lion-haikou, Odroid-Go2) and cleanups in some parts.
* tag 'v5.16-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (65 commits)
arm64: dts: rockchip: add phandles to muxed i2c buses on rk3368-lion
arm64: dts: rockchip: define iodomains for rk3368-lion
arm64: dts: rockchip: fix LDO_REG4 / LDO_REG7 confusion on rk3368-lion
arm64: dts: rockchip: align operating-points table name with dtschema
arm64: dts: rockchip: hook up camera on px30-evb
arm64: dts: rockchip: add isp node for px30
arm64: dts: rockchip: add Coresight debug range for RK3399
arm64: dts: rockchip: Correct regulator for USB host on Odroid-Go2
arm64: dts: rockchip: fix PCI reg address warning on rk3399-gru
arm64: dts: rockchip: add saradc to rk3568-evb1-v10
arm64: dts: rockchip: Fix GPU register width for RK3328
arm64: dts: rockchip: Re-add interrupt-names for RK3399's vpu
arm64: dts: rockchip: add missing rockchip,grf property to rk356x
arm64: dts: rockchip: add RK3399 Gru gpio-line-names
arm64: dts: rockchip: Enable SFC for Odroid Go Advance
arm64: dts: rockchip: Add SFC to RK3308
arm64: dts: rockchip: Add SFC to PX30
arm64: dts: rockchip: add thermal support to Quartz64 Model A
arm64: dts: rockchip: add rk3568 tsadc nodes
arm64: dts: rockchip: add rk356x gpio debounce clocks
...
Link: https://lore.kernel.org/r/4439872.CQOukoFCf9@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
arm64: dts: ZynqMP DT changes for v5.16
- Fix issues reported by dtbs_check
- Enable DMAs, DP, USB, NAND on various boards
- Add description for irps5401
- Add pinctrl description
- Add psgtr description for usb3, sata and DP
- Start to use nvmem alias for eeprom reference
- Clean up aliases list
- Wire qspi and usb3.0
- Add support for zcu102-rev1.1
- Couple of minor fixes and sync patches
* tag 'zynqmp-dt-for-v5.16' of https://github.com/Xilinx/linux-xlnx: (36 commits)
arm64: zynqmp: Wire psgtr for zc1751-xm013
arm64: zynqmp: Enable xlnx,zynqmp-dwc3 driver for xilinx boards
arm64: zynqmp: Enable gpio and qspi for zc1275-revA
arm64: zynqmp: Fix serial compatible string
arm64: zynqmp: Remove not documented is-dual property
arm64: zynqmp: Add psgtr description to zc1751 dc1 board
arm64: zynqmp: Add support for zcu102-rev1.1 board
arm64: zynqmp: Remove description for 8T49N287 and si5382 chips
arm64: zynqmp: Sync psgtr node location with zcu104-revA
arm64: zynqmp: Add reset description for sata
arm64: zynqmp: Move rtc to different location on zcu104-revA
arm64: zynqmp: Wire qspi on multiple boards
arm64: zynqmp: Remove information about dma clock on zcu106
arm64: zynqmp: Update rtc calibration value
arm64: zynqmp: Add note about UHS mode on some boards
arm64: zynqmp: Move DP nodes to the end of file on zcu106
arm64: zynqmp: Remove can aliases from zc1751
arm64: zynqmp: Add reset-on-timeout to all boards and modify default timeout value
arm64: zynqmp: List reset property for ethernet phy
arm64: zynqmp: Add nvmem alises for eeproms
...
Link: https://lore.kernel.org/r/b1cbd05d-ab40-e1fc-4001-6cf88e1e81f9@monstr.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add new properties to USB PHYs needed for enabling USB OTG mode.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Nexus 7 has OTG-cable microUSB port, enable OTG mode. USB peripheral
devices now can be connected to Nexus 7 using OTG adapter, switching
USB port into host mode.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add new properties to USB PHYs needed for enabling USB OTG mode.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The host-wakeup GPIO is now marked as deprecated in the broadcom-bluetooth
device-tree binding, it's replaced with the host-wakeup interrupt. Update
Tegra device-trees to the recent version of the Bluetooth binding.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The "ak,ak8975" compatible is not recognized by dt-bindings, it's
deprecated. Use supported "asahi-kasei,ak8975" compatible.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Thierry Reding <treding@nvidia.com>
There are couple of revisions of SOMs (k26) and associated carrier cards
(kv260).
SOM itself has two major versions:
sm-k26 - SOM with EMMC
smk-k26 - SOM without EMMC used on starter kit with preprogrammed firmware
in QSPI.
SOMs are describing only devices available on the SOM or connections which
are described in specification (for example UART, fwuen).
When SOM boots out of QSPI it uses limited number of peripherals defined by
the specification and present in sm(k)-k26 dtses.
Then a carrier card (CC) detection is happening and DT overlay is applied
to brings new functionality. That's why DT overlays are used. The name is
composed together with SOM name and CC name that's why DT overlays with
these names are generated to make sure they can be used together.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1ba32590670434b650bacf6410a65579dd30b38b.1632294439.git.michal.simek@xilinx.com
