dt-bindings: Changes for v6.10-rc1
Included is one change that adds the dma-coherent flag to the device
tree json-schema for host1x on Tegra194 and Tegra234.
* tag 'tegra-for-6.10-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: display: tegra: Allow dma-coherent on Tegra194 and later
Link: https://lore.kernel.org/r/20240426180519.3972626-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New boards: ArmSom Sige7, GameForce Chi,Forlinx FET3588-C with OK3588-C
baseboard, Protonic MECSBC, Wolfvision PF5.
The panthor driver for Mali Valhall GPUs landed, so a number of boards
enable their gpu (Cool Pi, Theobroma-Systems boards, QuartzPro64,
Rock5b, EVB1)
Also the USBDP phy driver landed, allowing the usb3 dual-role controllers
to be used on EVB1, Rock 5A and 5B, Indiedroid-Nova, Theobroma-Systems
Tiger and Jaguar.
A lot new peripherals for the Khadas Edge 2 (rtc, uart, sfc, adc, ir,
usb, pcie, tf-card, pmic); PCIe3 support on Jaguar, audio support for
the rk3308 and cache descriptions for rk356x and rk3328.
Corrected model names for boards from Radxa, Pine64, Powkiddy, Anberic
and general more dt cleanups.
* tag 'v6.10-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (64 commits)
arm64: dts: rockchip: add dual-role usb3 hosts to rk3588 Tiger-Haikou
arm64: dts: rockchip: add usb-id extcon on rk3588 tiger
arm64: dts: rockchip: fix comment for upper usb3 port
arm64: dts: rockchip: fix pcie-refclk frequency on rk3588 tiger
arm64: dts: rockchip: correct gpio_pwrctrl1 typos on rk3588(s) boards
arm64: dts: rockchip: Correct the model names for Pine64 boards
dt-bindings: arm: rockchip: Correct the descriptions for Pine64 boards
arm64: dts: rockchip: Add ArmSom Sige7 board
dt-bindings: arm: rockchip: Add ArmSoM Sige7
dt-bindings: vendor-prefixes: add ArmSoM
arm64: dts: rockchip: add PCIe3 support on rk3588-jaguar
arm64: dts: rockchip: move uart2 pinmux to dtsi on rk3588-tiger
arm64: dts: rockchip: Add USB-C Support for rk3588s-indiedroid-nova
arm64: dts: rockchip: correct the model name for Radxa ROCK 3A
dt-bindings: arm: rockchip: correct the model name for Radxa ROCK 3A
arm64: dts: rockchip: Correct the model names for Radxa ROCK 5 boards
dt-bindings: arm: rockchip: Correct the descriptions for Radxa boards
arm64: dts: rockchip: add lower USB3 port to rock-5b
arm64: dts: rockchip: add upper USB3 port to rock-5a
arm64: dts: rockchip: add USB3 to rk3588-evb1
...
Link: https://lore.kernel.org/r/15361932.O9o76ZdvQC@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
STM32 DT for v6.10, round 1
Highlights:
----------
- MPU:
- STM32MP13:
- Add and enable LTDC display (rocktech,rk043fn48h)
on stm32mp135f-dk.
- Add firewall bus based on ETZPC firewall controller.
- Add PWR regulator support: Can be only used if the platform is
set as "no-secure" (RCC_SECCFGR cleared) either use SCMI
regulator.
- STMP32MP15:
- Add firewall bus based on ETZPC firewall controller.
- Add heartbeat on stm32mp157c-ed1.
- STM32MP25:
- Add firewall bus based on RIFSC firewall controller.
- Add clock support (RCC) based on SCMI clock protocol for root clocks.
- Add all I2C instances and declare i2c2/i2c8 on stm32mp257f-ev1.
- Add all SPI instances. and declare spi3/spi8 on stm32mp257f-ev1.
* tag 'stm32-dt-for-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (21 commits)
arm64: dts: st: correct masks for GIC PPI interrupts on stm32mp25
arm64: dts: st: add spi3 / spi8 properties on stm32mp257f-ev1
arm64: dts: st: add spi3/spi8 pins for stm32mp25
arm64: dts: st: add all 8 spi nodes on stm32mp251
arm64: dts: st: add i2c2 / i2c8 properties on stm32mp257f-ev1
arm64: dts: st: add i2c2/i2c8 pins for stm32mp25
arm64: dts: st: add all 8 i2c nodes on stm32mp251
arm64: dts: st: add rcc support for STM32MP25
ARM: dts: stm32: enable display support on stm32mp135f-dk board
ARM: dts: stm32: add LTDC pinctrl on STM32MP13x SoC family
ARM: dts: stm32: add LTDC support for STM32MP13x SoC family
dt-bindings: display: simple: allow panel-common properties
ARM: dts: stm32: add PWR regulators support on stm32mp131
media: dt-bindings: add access-controllers to STM32MP25 video codecs
ARM: dts: stm32: add heartbeat led for stm32mp157c-ed1
ARM: dts: stm32: move can3 node from stm32f746 to stm32f769
ARM: dts: stm32: put ETZPC as an access controller for STM32MP13x boards
ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards
ARM: dts: stm32: put ETZPC as an access controller for STM32MP15x boards
ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
...
Link: https://lore.kernel.org/r/2040767c-413e-4447-b354-c44999930e4c@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM64: DT: HiSilicon ARM64 DT updates for v6.10
- Move non-MMIO node out of soc for the hip05, hip06 and hip07 SoC
- Miscellaneous fixes and improvements like correcting unit addresses and
missing reg
* tag 'hisi-arm64-dt-for-6.10' of https://github.com/hisilicon/linux-hisi:
arm64: dts: hisilicon: hi6220: correct tsensor unit addresses
arm64: dts: hisilicon: hi6220-hikey: drop unit addresses from fixed regulators
arm64: dts: hisilicon: hi6220-hikey: add missing port@0 reg
arm64: dts: hisilicon: hip07: correct unit addresses
arm64: dts: hisilicon: hip07: move non-MMIO node out of soc
arm64: dts: hisilicon: hip06: correct unit addresses
arm64: dts: hisilicon: hip06: move non-MMIO node out of soc
arm64: dts: hisilicon: hip05-d02: correct local-bus unit addresses
arm64: dts: hisilicon: hip05: move non-MMIO node out of soc
Link: https://lore.kernel.org/r/662A4115.9020805@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM64 changes for v6.10
1. Add FIFO depth to each SPI node so we can avoid matching this through
DTS alias. Difference SPI instances on given SoC have different FIFO
depths.
2. Exynos850: add clock controllers providing clocks to CPUs.
3. Google GS101: few cleanups and add missing serial engine (USI)
interface nodes.
* tag 'samsung-dt64-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: gs101: define all PERIC USI nodes
arm64: dts: exynos: gs101: join lines close to 80 chars
arm64: dts: exynos: gs101: move pinctrl-* properties after clocks
arm64: dts: exynos: gs101: move serial_0 pinctrl-0/names to dtsi
arm64: dts: exynos: gs101: reorder pinctrl-* properties
arm64: dts: exynos850: Add CPU clocks
arm64: dts: exynosautov9: specify the SPI FIFO depth
arm64: dts: exynos5433: specify the SPI FIFO depth
Link: https://lore.kernel.org/r/20240425071856.9235-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Devicetree changes for omaps for v6.10
Update n900 charge limit, and make use of the clksel binding for dra7
for the clksel clocks and other dpll output related clocks.
* tag 'omap-for-v6.10/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: dra7: Use clksel binding for CTRL_CORE_SMA_SW_0
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_USB
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_PER
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_ABE_PLL_SYS
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_CORE
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_EVE
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_GMAC
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_DRR
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_GPU
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_IVA
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_DSP
ARM: dts: dra7: Use clksel binding for CM_CLKSEL_DPLL_CORE
ARM: dts: n900: set charge current limit to 950mA
Link: https://lore.kernel.org/r/pull-1714020191-304166@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tegra194 and later chips have a coherency fabric, so some devices can be
marked as DMA coherent to avoid unnecessary cache maintenance.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Using GIC_CPU_MASK_SIMPLE(x), x should reflect the number of CPUs.
STM32MP251 is a single core Cortex A35, STM32MP253 is a dual core CA35.
Fixes: 5d30d03aaf ("arm64: dts: st: introduce stm32mp25 SoCs family")
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add properties for spi3 and spi8 available on the stm32mp257f-ev1.
Both are kept disabled since only used via the gpio expansion connector.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add properties for i2c2 and i2c8 available on the stm32mp257f-ev1.
i2c2 is enabled since several devices are attached to it while
i2c8 is kept disabled since only used via the gpio expansion connector.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
STM32MP13x SoC family embeds a new version of LTDC (Liquid crystal
display - Thin film transistor) Display Controller.
It provides a parallel digital RGB (red, green, blue) and signals for
horizontal, vertical synchronization, pixel clock and data enable as
output to interface directly to a variety of LCD-TFT panels.
Main features
* 2 input layers blended together to compose the display
* Cropping of layers from any input size and location
* Multiple input pixel formats:
– Predefined ARGB, with 7 formats: ARGB8888, ABGR8888, RGBA8888,
BGRA8888, RGB565, BGR565, RGB888packed.
– Flexible ARGB, allowing any width and location for A,R,G,B
components.
– Predefined YUV, with 3 formats: YUV422-1L (FourCC: YUYV,
Interleaved), YUV420-2L (FourCC: NV12, semi planar), YUV420-3L
(FourCC: Yxx, full planar) with some flexibility on the sequence of
the component.
* Color look-up table (CLUT) up to 256 colors (256x24 bits) per layer
* Color transparency keying
* Composition with flexible window position and size versus output
display
* Blending with flexible layer order and alpha value (per pixel or
constant)
* Background underlying color
* Gamma with non-linear configurable table
* Dithering for output with less bits per component (pseudo-random on
2 bits)
* Polarity inversion for HSync, VSync, and DataEnable outputs
* Output as RGB888 24 bpp or YUV422 16 bpp
* Secure layer (using Layer2) capability, with grouped regs and
additional interrupt set
* Interrupts based on 7 different events
* AXI master interface with long efficient bursts (64 or 128 bytes)
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
This patch adds STM32 PWR regulators DT support on stm32mp131.
This requires TFA to clear RCC_SECCFGR, is disabled by default
and can only be enabled on board DT level.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
According to documents [1], [2] and [3], we have 2 CAN devices on the
stm32f746 platform and 3 on the stm32f769 platform. So let's move the
can3 node from stm32f746.dtsi to stm32f769.dtsi.
[1] https://www.st.com/en/microcontrollers-microprocessors/stm32f7-series.html
[2] RM0385: STM32F75xxx and STM32F74xxx advanced Arm®-based 32-bit MCUs
[3] RM0410: STM32F76xxx and STM32F77xxx advanced Arm®-based 32-bit MCUs
Fixes: df362914ee ("ARM: dts: stm32: re-add CAN support on stm32f746")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Reference ETZPC as an access-control-provider.
For more information on which peripheral is securable or supports MCU
isolation, please read the STM32MP13 reference manual
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
ETZPC is a firewall controller. Put all peripherals filtered by the
ETZPC as ETZPC subnodes and keep the "simple-bus" compatible for
backward compatibility.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Reference ETZPC as an access-control-provider.
For more information on which peripheral is securable or supports MCU
isolation, please read the STM32MP15 reference manual
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
ETZPC is a firewall controller. Put all peripherals filtered by the
ETZPC as ETZPC subnodes and keep the "simple-bus" compatible for
backward compatibility.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Apart from the host-only usb3 controller (host2) the rk3588 also provides
two dual-role controllers. On the Tiger-Haikou combination these are
connected to the lower usb3-host port in host-only mode and the micro-usb3
port for dual-role operation.
Add the necessary controllers, phys to the Tiger-Haikou board and enable
the usb-id extcon.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240422163951.2604273-4-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
gpio_pwrctrl2 gets duplicated by both rk806_dvs1_null and rk806_dvs2_null
gpio_pwrctrl1 is unset. This typo appears in multiple files. Let's fix them.
Note: I haven't had the chance to test them all because I don't own all
of these boards (obviously). Please test if it's needed.
Signed-off-by: Jing Luo <jing@jing.rocks>
Link: https://lore.kernel.org/r/20240420130355.639406-1-jing@jing.rocks
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
