mirrors/linux
2
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2026-05-09 12:33:18 -04:00
Code Issues Packages Projects Releases Wiki Activity
1,352,018 Commits 1 Branch 929 Tags
7225a6a2452267396d0fc5b7b8d180fe4ff80c7f
Commit Graph

1352018 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Johannes Berg
7225a6a245 wifi: iwlwifi: cfg: add FM RF config 
The Bz configs really should be FM for the RF, so
move that around.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-7-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-10 21:42:36 +03:00
Johannes Berg
3a515211a0 wifi: iwlwifi: cfg: add GF RF config 
This is equivalent to just the previous iwl_cfg_ma, but
really should also be used for Bz/Gf and Sc/Gf, instead
of those using EHT sizes.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-6-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-10 21:42:31 +03:00
Johannes Berg
2ffa48ab99 wifi: iwlwifi: cfg: unify HR configs 
Unify the HR configs to just one HR RF config. All the fields
were the same already, so this doesn't do anything.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-5-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-10 21:42:26 +03:00
Johannes Berg
5e3033970c wifi: iwlwifi: cfg: unify JF configs 
Unify the JF configs to just one JF RF config. This can be
done because the differing fields (thermal and DCCM offsets)
won't be used for Qu MACs (and up) due to firmware support.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-4-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-10 21:42:21 +03:00
Johannes Berg
b8eee90f0b wifi: iwlwifi: cfg: unify num_rbds config 
This should depend on both the RF (VHT/HE/EHT support) and
the MAC (<=22000 can put multiple frames into one buffer),
so unify the config in the struct iwl_cfg to just have it
sized according to the RF, and then double it for all the
MACs starting from AX210 (So/Ty).

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-3-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-10 21:42:16 +03:00
Johannes Berg
03e433545c wifi: iwlwifi: cfg: add ucode API min/max to MAC config 
In some older devices, the min/max firmware API supported by
the driver depends on the specific device, when sharing the
the same MAC (config). For most newer devices, it really is
dependent on the MAC instead, since the firmware was frozen
for certain MAC types. However, in the future we expect also
freezes for RF types there.

To handle this most generally, add an API min/max to the MAC
config and then use the narrowest range prescribed by both,
if set.

For the newer MACs since 9000, move the configuration, there
was only a freeze on MAC+RF lines so far.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250509104454.2582160-2-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-10 21:41:51 +03:00
Johannes Berg
24bc9b9761 wifi: iwlwifi: remove unused high_temp from iwl_cfg 
This value is never read, so it's not needed. Remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-16-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-09 15:38:52 +03:00
Johannes Berg
857ecb8524 wifi: iwlwifi: cfg: move MAC parameters to MAC data 
There are a number of MAC parameters that are in the iwl_cfg
(which is the last config matched to the MAC/RF combination).
This isn't necessary, there are many more of those than MACs,
so move (most of) the data into the MAC family config struct.

Note that DCCM information remains for use by older devices,
and on 9000 series it'll be in struct iwl_cfg but be ignored
when the CRF is in a Qu/So platform.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-15-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-09 15:38:47 +03:00
Johannes Berg
92e1d69c20 wifi: iwlwifi: cfg: remove DCCM offsets from new devices 
This is only used with old-style debug dump, which isn't
supported on newer devices, so remove the data.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-14-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-09 15:38:43 +03:00
Johannes Berg
9db3594222 wifi: iwlwifi: cfg: remove eeprom_size from new devices 
Since 22000 series, the data is read by the firmware and the
driver doesn't need to know, remove the useless setting.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-13-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-09 15:38:39 +03:00
Johannes Berg
264e744fec wifi: iwlwifi: rename struct iwl_base_params 
These are (going to be) base MAC parameters that are identical
even for different platforms with the same MAC, so rename the
structure accordingly, calling it iwl_family_base_params.

Also rename the pointer to it so the dereferencing is a bit
shorter.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-12-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-09 15:38:35 +03:00
Johannes Berg
b9b537c15f wifi: iwlwifi: cfg: remove rf_id field 
This field is always set for >= 9000 series, but then we
already check that, so it's not needed. Remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-11-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-09 15:38:31 +03:00
Johannes Berg
32e54927fe wifi: iwlwifi: cfg: remove dbgc_supported field 
This field is unused, remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-10-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-09 15:38:27 +03:00
Johannes Berg
c96a364910 wifi: iwlwifi: rename cfg_trans_params to mac_cfg 
Since 9000 series devices, the devices are split into MAC and
CRF parts. Currently, "struct iwl_cfg" reflects some MAC and
some RF parameters, but we want to clean this up and move the
MAC data to what's now "struct iwl_cfg_trans_params". As the
first step, to reflect the intent, rename this structure.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-9-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-09 15:37:54 +03:00
Johannes Berg
8b24b32ee6 wifi: iwlwifi: pass trans to iwl_parse_nvm_mcc_info() 
There's no need to pass various different pointers when
the transport is already established, so just pass that
instead.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-8-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-09 15:37:49 +03:00
Johannes Berg
a12a287212 wifi: iwlwifi: cfg: remove nvm_hw_section_num from new devices 
This value hasn't been used since unified firmware in 22000
series, so there's no need to set the value for that or
newer devices. Remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-7-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-09 15:37:45 +03:00
Johannes Berg
5544b801aa wifi: iwlwifi: cfg: handle cc firmware dynamically 
Instead of using fw_name_pre, handle the cc firmware file
name specially in iwl_drv_get_fwname_pre() for the cc MAC
type.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-6-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-09 15:37:40 +03:00
Johannes Berg
ebc1a98be7 wifi: iwlwifi: cfg: build ax210 family FW names dynamically 
Add support for the TY MAC (discrete device) and GF4 RF to
the list of MAC/RF types, and use that to remove fw_name_pre
for the ax210 family devices.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-5-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-09 15:37:33 +03:00
Johannes Berg
de5d746fd0 wifi: iwlwifi: cfg: remove 'cdb' value 
This is never used, so remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-4-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-09 15:37:28 +03:00
Johannes Berg
38dbf4d5ed wifi: iwlwifi: cfg: remove QuZ/JF special cases 
Since JF RF always uses b0 step and QuZ MAC always uses
a0 step for firmware, there's no need for these configs
that just force the steps to those values. Remove them.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-3-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-09 15:37:24 +03:00
Johannes Berg
beba2316b8 wifi: iwlwifi: build 9000 series FW filenames dynamically 
This is more maintainable than the fw_name_pre prefix, and
requires fewer duplicate structs as well. Since only b0 FW
exists, override the MAC/RF steps for these devices.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250508121306.1277801-2-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-09 15:37:19 +03:00
Johannes Berg
04901be1ec wifi: iwlwifi: add JF1/JF2 RF for dynamic FW building 
This is needed, otherwise we don't know what to do and will
not find the correct firmware.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-16-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-09 15:37:15 +03:00
Johannes Berg
6db547d07f wifi: iwlwifi: pcie: remove 0x2726 devices 
These are test chips, not available to users, and not even listed
in the PCI IDs table (so the driver won't bind them). There's no
reason to list specific devices with them in the driver.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-15-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-09 15:37:10 +03:00
Johannes Berg
81ca8c5fae wifi: iwlwifi: cfg: inline HT params 
With just a handful of values in two bytes, the params are
smaller than the pointer to them. Inline them and save some
space.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-14-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-09 15:37:06 +03:00
Johannes Berg
51298f09ba wifi: iwlwifi: cfg: remove 6 GHz from ht40_bands 
Since there's no HT on 6 GHz, only HE, the HT capabilities
are never initialized, and so the ht40_bands value is never
checked for the 6 GHz band. Remove the misleading value.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-13-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-09 15:36:56 +03:00
Benjamin Berg
83128399f3 wifi: iwlwifi: mld: call thermal exit without wiphy lock held 
The driver must not hold the wiphy mutex when unregistering the thermal
devices. Do not hold the lock for the call to iwl_mld_thermal_exit and
only do a lock/unlock to cancel the ct_kill_exit_wk work.

The problem is that iwl_mld_tzone_get_temp needs to take the wiphy lock
while the thermal code is holding its own locks already. When
unregistering the device, the reverse would happen as the driver was
calling thermal_cooling_device_unregister with the wiphy mutex already
held.

It is not likely to trigger this deadlock as it can only happen if the
thermal code is polling the temperature while the driver is being
unloaded. However, lockdep reported it so fix it.

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-12-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-09 15:36:52 +03:00
Miri Korenblit
1437d6c4f2 wifi: iwlwifi: mld: avoid init-after-queue 
rx_omi::finished_work is initialized when the containing link is.
If the worker was queued and then an error happened, we will get to
iwl_mld_init_link from the reconfig and initialize the work after it was
queued.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-11-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-09 15:36:44 +03:00
Benjamin Berg
2d81aefc59 wifi: iwlwifi: mld: use a radio/system specific power budget 
Different hardware has a different maximum power consumption and the
BIOS can also define a power limit for the device. Add code to select
an appropriate maximum power budget for the device and configure that
instead of using a hardcoded table.

This removes the old table. It does not work with the variable upper
limit and the there should be no consumer that requires these exact step
values.

This considerably increases the power budget for some devices and can
prevent throttling in high traffic situations.

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-10-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-09 15:36:40 +03:00
Benjamin Berg
61d186045b wifi: iwlwifi: mvm: use a radio/system specific power budget 
Different hardware has a different maximum power consumption and the
BIOS can also define a power limit for the device. Add code to select
an appropriate maximum power budget for the device and configure that
instead of using a hardcoded table.

This removes the old table. It does not work with the variable upper
limit and the there should be no consumer that requires these exact step
values.

This considerably increases the power budget for some devices and can
prevent throttling in high traffic situations.

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-9-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-09 15:36:35 +03:00
Benjamin Berg
09019058f6 wifi: iwlwifi: fix thermal code compilation with -Werror=cast-qual 
The compare_temps function in both mvm and mld dropped the const
qualifier in a cast in a way that makes -Werror=cast-qual unhappy. Add
the const to the cast to fix this.

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-8-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-09 15:36:30 +03:00
Miri Korenblit
c63a202895 wifi: iwlwifi: pcie: remove iwl_trans_pcie_gen2_send_hcmd 
This function is not implemented nor called. Remove its declaration.

Link: https://patch.msgid.link/20250506194102.3407967-7-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-09 15:36:19 +03:00
Yedidya Benshimol
f5f157e8ae wifi: iwlwifi: Add support for a new version for link config command 
Add support for a new version of link configuration command
which includes NPCA and high priority TX traffic support for wifi8.

Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-6-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-09 15:36:15 +03:00
Yedidya Benshimol
df6146a029 wifi: iwlwifi: Add a new version for mac config command 
Add a new version of mac configuration command
which includes UHR support indication.

Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-5-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-09 15:36:10 +03:00
Yedidya Benshimol
a1346ceab5 wifi: iwlwifi: Add a new version for sta config command 
Add a new version of sta configuration command
which includes these wifi8 features:

1. LDPC X2 CW size support indication
2. Indication if ICF frame is needed instead of RTS
3. support for MIC padding delays for protected control frames

Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-4-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-09 15:36:06 +03:00
Avraham Stern
e12bc6f419 wifi: iwlwifi: add range response version 10 support 
Range response version 10 removes the rx and tx rates fields.
These fields aren't used by the driver anyway, so no change is
needed to support it.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-3-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-09 15:35:59 +03:00
Miri Korenblit
2d4f827901 wifi: iwlwifi: mld: remove one more error in unallocated BAID 
Since the FW is the one to assign an ID to a BA, it can happen that
the FW sends a bar_frame_release_notif before the driver had the chance to
allocate the BAID.

Convert the IWL_FW_CHECK into a regular debug print.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250506194102.3407967-2-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-09 15:35:46 +03:00
Johannes Berg
dabc88cb3b wifi: iwlwifi: handle v3 rates 
For UHR, a version 3 of the rate API is being added, which
increases the number of bits used for MCSes by shifting the
NSS bit up. Handle that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250505215513.84cde65a603f.Ic3119ef77cbc6461abd2a6bda104c0d236adcc8d@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-07 06:08:02 +03:00
Pagadala Yesu Anjaneyulu
871197bf7b wifi: iwlwifi: mld: add RFI_CONFIG_CMD to iwl_mld_system_names array 
Add RFI_CONFIG_CMD into the names array to facilitate the
display of this command name when sending it to the firmware.

Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com>
Link: https://patch.msgid.link/20250505215513.da89484cb838.I755709232f5e441ca159bdc5a151bac73d9744d3@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-07 06:08:02 +03:00
Johannes Berg
a2ec30065c wifi: iwlwifi: fix 6005N/SFF match 
That mask should never have been 0xFFFF (mask also doesn't
make sense in that case) but rather 0xF000 since I combined
a few entries with 0xC___.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250505215513.63bdbd67b72d.Id9b93b695c91117967dfd339c76bdfcd2872bee6@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-07 06:08:02 +03:00
Johannes Berg
beda255463 wifi: iwlwifi: make iwl_uefi_get_uats_table() return void 
This sets both fwrt->uats_valid and returns 0, but in the
static inline it returns 0 without setting uats_valid,
which is confusing and the iwlmvm code misbehaves in this
case.

Since it already sets uats_valid, just remove the extra
return value.

Reported-by: Bjoern A. Zeeb <bz@FreeBSD.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250505215513.e981a7911228.Ic94b5e03e2053a08b84cabeb58ce3b6598fd9fc6@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-07 06:08:02 +03:00
Emmanuel Grumbach
f214221512 wifi: iwlwifi: drop whtc RF 
This RF module is now a product. No need to support the test chip
anymore.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250505215513.01fb866e7c38.I23611aa4abb8fd031a6d63a21f4b87b0d38a36a1@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-07 06:08:02 +03:00
Emmanuel Grumbach
6776884379 wifi: iwlwifi: add support PE RF 
This is a new RF module and of course the firmware name for this new RF
module is different.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250505215513.c3481b1a4124.Id94c680636be2f59c9172919c79d80a48c7d1322@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-07 06:08:02 +03:00
Miri Korenblit
d73f8fb1d9 wifi: iwlwifi: debug: set CDB indication from CSR 
In order to set the CDB indication in the dump meta data, we read it from
a specific prph register.
There is a known issue with that register in Xnj setups - in that case it
will always indicate CDB.
Instead of detecting the jacket case and then hardcode whether the CDB
indication should or shouldn't be set (according the CRF),
we can retrieve the CDB bit from the hw_rf_id (CSR_HW_RF_ID).
There is also no reason to do it conditionally only for ax210 / BnJ.
Cleanup the code a bit.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250505215513.ea542a6c189e.I3d8cf5103b3747dfdd89985b45b592e419f97b63@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-07 06:08:02 +03:00
Johannes Berg
8d7f08922a wifi: iwlwifi: mvm: fix beacon CCK flag 
The beacon CCK flag should be set for any CCK rate, not
just for 1 Mbps. Fix that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Link: https://patch.msgid.link/20250505215513.fe18b7d92d7d.I7bb40a92cea102677b695beb1e2a62a5ea72678b@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-07 06:08:02 +03:00
Johannes Berg
3e84fe5fb5 wifi: iwlwifi: remove NVM C step override 
This was used for debug/bringup of 8000 devices, to be able to
unify between all 8000 devices with NVM override. However, this
is really no longer used, those are ancient devices by now, so
we can remove the logic.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250505215513.6210ac6cda09.I83cc3e68f0ed99a922d435c203fef840a28eb0de@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-07 06:08:02 +03:00
Johannes Berg
f14ef2145f wifi: iwlwifi: dvm: init 'keep_alive_beacons' in power tables 
These should be zero, but we might as well be explicit about it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250505215513.1e943bf696f4.Id2d7a413dc594c4525ac7ad0650ec8a50e1970ca@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-07 06:08:01 +03:00
Avraham Stern
f1699ad585 wifi: iwlwifi: mld: add debugfs for using ptp clock time for monitor interface 
Add a debugfs option to use the ptp clock time for Rx device
timestamps on a monitor interface. This can be useful for e.g.
synchronizing multiple NICs or reporting the timestamp in the
system clock instead of the GP2.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Link: https://patch.msgid.link/20250505215513.fffe6718fbca.I75f034005851a2d0c8ba5b015b9fdcad8a7c550d@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-07 06:08:01 +03:00
Johannes Berg
c9d8157895 wifi: iwlwifi: pcie: log async commands 
Currently, there are two log messages at INFO level for
synchronous commands:

    Attempting to send sync command ...
    Setting HCMD_ACTIVE for command ...

and unfortunately none at all for async ones. Add one
for async commands as well.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250505215512.cc4457285889.I633fae8828e8a37bbebc578166f388dcf893f592@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-07 06:08:01 +03:00
Miri Korenblit
befaea3040 wifi: iwlwifi: mld: don't check the TPT counters when scanning 
If there is an ongoing scan that lasts long, the MPDU counters may not
increase enough due the device being busy with scanning and not
because we are in a low throughput scenario.

In that case we don't want to block EMLSR.
Instead, stop checking the counters from the moment we started
scanning, and when the scan ends - clear the counters and schedule a
check in 5 seconds, as usual.

Note that this is only done for regular scan since MLO scan is too short
to affect the counters, and scheduled scan is mainly used when we are
not connected.

Also note that we only stop checking whether to block EMLSR, and not if to
unblock.

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250505215512.330ea440d19c.Ib10dae0b7a0cb0e10c59a9edf5ff7af0f065ac60@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-07 06:08:01 +03:00
Miri Korenblit
d95d66eabe wifi: iwlwifi: print the DSM value when read from UEFI 
We have such a print for ACPI, add one for UEFI.
This is needed for testing

Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250505215512.f419c18c064e.I870a4537a4bfa3c54b03ec7ec29bb246e6aa75cb@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
 2025-05-07 06:08:01 +03:00