UAPI Changes:
- Add madvise interface (Himal Prasad Ghimiray)
- Add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count and
memory attributes (Himal Prasad Ghimiray)
- Handle Firmware reported Hardware Errors notifying userspace with
device wedged uevent (Riana Tauro)
Cross-subsystem Changes:
- Add a vendor-specific recovery method to drm device wedged uevent
(Riana Tauro)
Driver Changes:
- Use same directory structure in debugfs as in sysfs (Michal Wajdeczko)
- Cleanup and future-proof VRAM region initialization (Piotr Piórkowski)
- Add G-states and PCIe link states to debugfs (Soham Purkait)
- Cleanup eustall debug messages (Harish Chegondi)
- Add SR-IOV support to restore Compression Control Surface (CCS) to
Xe2 and later (Satyanarayana K V P)
- Enable SR-IOV PF mode by default on supported platforms without
needing CONFIG_DRM_XE_DEBUG and mark some platforms behind
force_probe as supported (Michal Wajdeczko)
- More targeted log messages (Michal Wajdeczko)
- Cleanup STEER_SEMAPHORE/MCFG_MCR_SELECTOR usage (Nitin Gote)
- Use common code to emit flush (Tvrtko Ursulin)
- Add/extend more HW workarounds and tunings for Xe2 and Xe3
(Sk Anirban, Tangudu Tilak Tirumalesh, Nitin Gote, Chaitanya Kumar Borah)
- Add a generic dependency scheduler to help with TLB invalidations
and future scenarios (Matthew Brost)
- Use DRM scheduler for delayed GT TLB invalidations (Matthew Brost)
- Error out on incorrect device use in configfs
(Michal Wajdeczko, Lucas De Marchi)
- Refactor configfs attributes (Michal Wajdeczko / Lucas De Marchi)
- Allow configuring future VF devices via configfs (Michal Wajdeczko)
- Implement some missing XeLP workarounds (Tvrtko Ursulin)
- Generalize WA BB setup/emission and add support for
mid context restore BB, aka indirect context (Tvrtko Ursulin)
- Prepare the driver to expose mmio regions to userspace
in future (Ilia Levi)
- Add more GuC load error status codes (John Harrison)
- Document DRM_XE_GEM_CREATE_FLAG_DEFER_BACKING (Priyanka Dandamudi)
- Disable CSC and RPM on VFs (Lukasz Laguna, Satyanarayana K V P)
- Fix oops in xe_gem_fault with PREEMPT_RT (Maarten Lankhorst)
- Skip LMTT update if no LMEM was provisioned (Michal Wajdeczko)
- Add support to VF migration (Tomasz Lis)
- Use a helper for guc_waklv_enable functions (Jonathan Cavitt)
- Prepare GPU SVM for migration of THP (Francois Dugast)
- Program LMTT directory pointer on all GTs within a tile
(Piotr Piórkowski)
- Rename XE_WA to XE_GT_WA to better convey its scope vs the device WAs
(Matt Atwood)
- Allow to match devices on PCI devid/vendorid only (Lucas De Marchi)
- Improve PDE PAT index selection (Matthew Brost)
- Consolidate ASID allocation in xe_vm_create() vs
xe_vm_create_ioctl() (Piotr Piórkowski)
- Resize VF BARS to max possible size according to number of VFs
(Michał Winiarski)
- Untangle vm_bind_ioctl cleanup order (Christoph Manszewski)
- Start fixing usage of XE_PAGE_SIZE vs PAGE_SIZE to improve
compatibility with non-x86 arch (Simon Richter)
- Improve tile vs gt initialization order and accounting
(Gustavo Sousa)
- Extend WA kunit test to PTL
- Ensure data is initialized before transferring to pcode
(Stuart Summers)
- Add PSMI support for HW validation (Lucas De Marchi,
Vinay Belgaumkar, Badal Nilawar)
- Improve xe_dma_buf test (Thomas Hellström, Marcin Bernatowicz)
- Fix basename() usage in generator with !glibc (Carlos Llamas)
- Ensure GT is in C0 during resumes (Xin Wang)
- Add TLB invalidation abstraction (Matt Brost, Stuart Summers)
- Make MI_TLB_INVALIDATE conditional on migrate (Matthew Auld)
- Prepare xe_nvm to be initialized early for future use cases
(Riana Tauro)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/nuejxdhnalyok7tzwkrj67dwjgdafwp4mhdejpyyqnrh4f2epq@nlldovuflnbx
Commit 2677010e77 ("Add support to set NAPI threaded for individual
NAPI") introduced threaded NAPI configuration per individual NAPI
instance, however obsolete description that threaded NAPI is per device
has remained.
Remove the old description and clarify that only NAPI instances running
in threaded mode spawn kernel threads by changing "Each NAPI instance"
to "Each threaded NAPI instance".
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://patch.msgid.link/20250829064857.51503-1-enjuk@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Depending on which display that is connected to the controller, an "1"
means either a black or a white pixel.
The supported formats (R1/R2/XRGB8888) expects the pixels
to map against (4bit):
00 => Black
01 => Dark Gray
10 => Light Gray
11 => White
If this is not what the display map against, the controller has support
to invert these values.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250721-st7571-format-v2-2-159f4134098c@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Rework the PowerVR Rogue GPU binding to use an explicit, per variant
style for defining power domain properties and add support for the
T-HEAD TH1520 SoC's GPU.
To improve clarity and precision, the binding is refactored so that
power domain items are listed explicitly for each variant [1]. The
previous method relied on an implicit, positional mapping between the
`power-domains` and `power-domain-names` properties. This change
replaces the generic rules with self contained if/then blocks for each
GPU variant, making the relationship between power domains and their
names explicit and unambiguous.
The generic if block for img,img-rogue, which previously required
power-domains and power-domain-names for all variants, is removed.
Instead, each specific GPU variant now defines its own power domain
requirements within a self-contained if/then block, making the schema
more explicit.
This new structure is then used to add support for the
`thead,th1520-gpu`. While its BXM-4-64 IP has two conceptual power
domains, the TH1520 SoC integrates them behind a single power gate. The
new binding models this with a specific rule that enforces a single
`power-domains` entry and disallows the `power-domain-names` property.
Link: https://lore.kernel.org/all/4d79c8dd-c5fb-442c-ac65-37e7176b0cdd@linaro.org/ [1]
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Link: https://lore.kernel.org/r/20250822-apr_14_for_sending-v13-2-af656f7cc6c3@samsung.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Devicetree is a data structure and it is a bit generic term, because
some treat Devicetree bindings as Devicetree. What the SoC maintainers
profile is mentioning in ABI stability are the Devicetree sources, so
DTS files. It is also more common during reviews to refer to these as
per "DTS" instead "devicetree".
Clarify that by using "DTS" name in few more places.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250812104154.42289-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Extend the existing Tegra186 GPIO controller device tree bindings with
support for the GPIO controller found on Tegra256. The number of pins is
slightly different, but the programming model remains the same
Add a new header, include/dt-bindings/gpio/tegra256-gpio.h,
that defines port IDs as well as the TEGRA256_MAIN_GPIO() helper,
both of which are used in conjunction to create a unique specifier
for each pin. The OS can reconstruct the port ID and pin from
these values to determine the register region for the corresponding
GPIO. However, the OS does not use the macro definitions in this file.
The symbolic names help associate these GPIO specifiers with the names
used in the technical documentation available for the chip.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250823055420.24664-1-pshete@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Pull x86 fixes from Borislav Petkov:
- Convert the SSB mitigation to the attack vector controls which got
forgotten at the time
- Prevent the CPUID topology hierarchy detection on AMD from
overwriting the correct initial APIC ID
- Fix the case of a machine shipping without microcode in the BIOS, in
the AMD microcode loader
- Correct the Pentium 4 model range which has a constant TSC
* tag 'x86_urgent_for_v6.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Add attack vector controls for SSB
x86/cpu/topology: Use initial APIC ID from XTOPOLOGY leaf on AMD/HYGON
x86/microcode/AMD: Handle the case of no BIOS microcode
x86/cpu/intel: Fix the constant_tsc model check for Pentium 4
The CSI-2 receiver can be instantiated with up to four output channels.
This is an integration-specific property, specify the number of
instantiated channels through a new fsl,num-channels property. The
property is optional, and defaults to 1 as only one channel is currently
supported by drivers.
Using the compatible string to infer the number of channels has been
considered, but multiple instances of the same CSIS in the same SoC
could conceptually be synthesized with a different number of channels.
An explicit property is therefore more appropriate.
The only known SoC to have more than one channel is the i.MX8MP. As the
binding examples do not cover that SoC, don't update them.
Link: https://lore.kernel.org/r/20250822002734.23516-12-laurent.pinchart@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Use correct clocks properties for the AD7124 family of ADCs.
These ADCs have an internal clock along with an optional external clock
that can be connected to the CLK pin. This pin can be wired up 3 ways:
1. Not connected - the internal clock is used.
2. Connected to an external clock (input) - the external clock is used.
3. Connected to the CLK pin on another ADC (output) - the internal clock
is used on one and the other is configured for an external clock.
The new bindings describe these 3 cases by picking one of the following:
1. Omit both clocks and #clock-cells properties.
2. Include only the clocks property with a phandle to the external clock.
3. Include only the #clock-cells property on the ADC providing the output.
The clock-names property is now deprecated and should not be used. The
MCLK signal that it refers to is an internal counter in the ADC and
therefore does not make sense as a devicetree property as it can't be
connected to anything external to the ADC. Since there is only one
possible external clock, the clock-names property is not needed anyway.
Based on the implementation of the Linux driver, it looks like the
"mclk" clock was basically being used as a control to select the power
mode of the ADC, which is not something that should be done in the
devicetree.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250828-iio-adc-ad7124-proper-clock-support-v3-1-0b317b4605e5@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add DT binding for Texas Instruments DTHE V2 cryptography engine.
DTHE V2 is introduced as a part of TI AM62L SoC and can currently be
only found in it.
Signed-off-by: T Pratham <t-pratham@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
pinctrl: renesas: Updates for v6.18
- Add support for Output Enable (OEN) on RZ/G3E,
- Add support for the RZ/T2H and RZ/N2H SoCs,
- Miscellaneous fixes and improvements.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert the Broadcom iProc/Cygnus GPIO/Pinconf binding to DT schema
format.
The child node structure is based on the example as there's not any
actual .dts files with child nodes.
The binding wasn't clear that "reg" can be 1 or 2 entries. The number of
"reg" entries doesn't appear to be based on compatible, so no per
compatible constraints for it
The "brcm,iproc-stingray-gpio" could possibly be dropped. There are no
.dts files using it, but the driver uses it.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/20250812203348.733749-1-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert the Broadcom BCM2835 GPIO (and pinmux) controller binding to DT
schema format.
The structure of the child nodes wasn't well defined. The schema is
based on the .dts users. The legacy binding is a single level of child
nodes while the standard binding is 2 levels of child nodes.
The "all banks" interrupt is treated as optional following actual users.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/20250812203337.731648-1-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
