access-controllers is an optional property that allows a peripheral to
refer to one or more domain access controller(s).
This property is added when the peripheral is under the STM32 firewall
controller. It allows an accurate representation of the hardware, where
the peripheral is connected to a firewall bus. The firewall can then check
the peripheral accesses before allowing its device to probe.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Yannick Fertre <yannick.fertre@foss.st.com>
Link: https://lore.kernel.org/r/20250822-drm-misc-next-v5-2-9c825e28f733@foss.st.com
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
The information present in this file is outdated and doesn't serve any
purpose with the current design of the driver.
Remove the outdated file.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[ Viresh: Rewrite commit log ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The 'target-supply' property is used by some i.MX devicetree files.
Document it to fix the following dt-schema warning:
'target-supply' does not match any of the regexes: '^pinctrl-[0-9]+$'
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
"What is F2FS" is rather a mistitle for the whole f2fs docs, as it
implies the overview section (before "Background and design issues"
section) and the docs covers beyond that: from mount options to
filesystem implementation details.
Retitle and add explicit overview section.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Indent description text so that compression_mode numbered list gets
rendered as such in htmldocs output.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Write hint policy table has two rows which act as section rows: buffered
io and direct io, yet these rows are written as normal rows instead.
Column-span them.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Format compression_algorithm subtable as reST table as it does the
semantic job rather than normal paragraph.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
errors=%s subtable is shown in htmldocs output as long-running paragraph
instead due to missing separator from its previous paragraph. Add it.
Fixes: b62e71be21 ("f2fs: support errors=remount-ro|continue|panic mountoption")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Fixed following typos reported by Codespell
1. propogated ==> propagated
aperatures ==> apertures
In Documentation/gpu/amdgpu/debugfs.rst
2. parition ==> partition
In Documentation/gpu/amdgpu/process-isolation.rst
3. conections ==> connections
In Documentation/gpu/amdgpu/display/programming-model-dcn.rst
In addition to above,
Fixed wrong bit-partition naming in gpu/amdgpu/process-isolation.rst
from "fourth" partition to "third" partition.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Alexander Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Rakuram Eswaran <rakuram.e96@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
zcrx currently requires the ring to be set up with fixed 32b CQEs,
allow it to use IORING_SETUP_CQE_MIXED as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Attack vector controls for SSB were missed in the initial attack vector series.
The default mitigation for SSB requires user-space opt-in so it is only
relevant for user->user attacks. Check with attack vector controls when
the command is auto - i.e., no explicit user selection has been done.
Fixes: 2d31d28746 ("x86/bugs: Define attack vectors relevant for each bug")
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250819192200.2003074-5-david.kaplan@amd.com
All four FUSE docs are currently in upper-level
Documentation/filesystems/ directory, but these are distinct as a group
of its own. Move them into Documentation/filesystems/fuse/ subdirectory.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
As I preparing patches adding selftests for fusectl,
I notice that documentation of max_background and congestion_threshold
is missing.
This patch add some descriptions about these two files.
Cc: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Chen Linxuan <chenlinxuan@uniontech.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Now that all the x86 and arm64 plumbing for mmap() on guest_memfd is in
place, allow userspace to set GUEST_MEMFD_FLAG_MMAP and advertise support
via a new capability, KVM_CAP_GUEST_MEMFD_MMAP.
The availability of this capability is determined per architecture, and
its enablement for a specific guest_memfd instance is controlled by the
GUEST_MEMFD_FLAG_MMAP flag at creation time.
Update the KVM API documentation to detail the KVM_CAP_GUEST_MEMFD_MMAP
capability, the associated GUEST_MEMFD_FLAG_MMAP, and provide essential
information regarding support for mmap in guest_memfd.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shivank Garg <shivankg@amd.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250729225455.670324-22-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enable configuration of the burst period — a time window starting
from the first error recovery, during which the reporter allows
recovery attempts for each reported error.
This feature is helpful when a single underlying issue causes multiple
errors, as it delays the start of the grace period to allow sufficient
time for recovering all related errors. For example, if multiple TX
queues time out simultaneously, a sufficient burst period could allow
all affected TX queues to be recovered within that window. Without this
period, only the first TX queue that reports a timeout will undergo
recovery, while the remaining TX queues will be blocked once the grace
period begins.
Configuration example:
$ devlink health set pci/0000:00:09.0 reporter tx burst_period 500
Configuration example with ynl:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/devlink.yaml \
--do health-reporter-set --json '{
"bus-name": "auxiliary",
"dev-name": "mlx5_core.eth.0",
"port-index": 65535,
"health-reporter-name": "tx",
"health-reporter-burst-period": 500
}'
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250824084354.533182-5-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Address the need for a recovery method (firmware flash on Firmware errors)
introduced in the later patches of Xe KMD.
Whenever XE KMD detects a firmware error, a firmware flash is required to
recover the device to normal operation.
The initial proposal to use 'firmware-flash' as a recovery method was
not applicable to other drivers and could cause multiple recovery
methods specific to vendors to be added.
To address this a more generic 'vendor-specific' method is introduced,
guiding users to refer to vendor specific documentation and system logs
for detailed vendor specific recovery procedure.
Add a recovery method 'WEDGED=vendor-specific' for such errors.
Vendors must provide additional recovery documentation if this method
is used.
It is the responsibility of the consumer to refer to the correct vendor
specific documentation and usecase before attempting a recovery.
For example: If driver is XE KMD, the consumer must refer
to the documentation of 'Device Wedging' under 'Documentation/gpu/xe/'.
v2: fix documentation (Raag)
v3: add more details to commit message (Sima, Rodrigo, Raag)
add an example script to the documentation (Raag)
v4: use consistent naming (Raag)
v5: fix commit message
v6: add more documentation
Cc: André Almeida <andrealmeid@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250826063419.3022216-3-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Pull devicetree fixes from Rob Herring:
- Fix a memory leak for of_pci_add_properties() failure case. Then fix
the introduced UAF.
- Add missing IORESOURCE_MEM flag on of_reserved_mem_region_to_resource()
- Add already in use vendor prefix "eswin"
- Clarify "of of" comment in of_match_device(). After many years of
drive-by patches dropping the 2nd "of" (which referred to
OpenFirmware), a correct patch finally arrived
* tag 'devicetree-fixes-for-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: dynamic: Fix use after free in of_changeset_add_prop_helper()
dt-bindings: vendor-prefixes: add eswin
of: reserved_mem: Add missing IORESOURCE_MEM flag on resources
of: dynamic: Fix memleak when of_pci_add_properties() failed
of: Clarify OF device context in of_match_device() comment
None of MDP5 platforms have a LUT clock on the display-controller, it
was added by the mistake. Drop it, fixing DT warnings on MSM8976 /
MSM8956 platforms. Technically it's an ABI break, but no other platforms
are affected.
Fixes: 385c8ac763 ("dt-bindings: display/msm: convert MDP5 schema to YAML format")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/667822/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
This patch introduces dm-pcache, a new DM target that places a DAX-
capable persistent-memory device in front of any slower block device and
uses it as a high-throughput, low-latency cache.
Design highlights
-----------------
- DAX data path – data is copied directly between DRAM and the pmem
mapping, bypassing the block layer’s overhead.
- Segmented, crash-consistent layout
- all layout metadata are dual-replicated CRC-protected.
- atomic kset flushes; key replay on mount guarantees cache integrity
even after power loss.
- Striped multi-tree index
- Multi‑tree indexing for high parallelism.
- overlap-resolution logic ensures non-intersecting cached extents.
- Background services
- write-back worker flushes dirty keys in order, preserving backing-device
crash consistency. This is important for checkpoint in cloud storage.
- garbage collector reclaims clean segments when utilisation exceeds a
tunable threshold.
- Data integrity – optional CRC32 on cached payload; metadata always protected.
Comparison with existing block-level caches
---------------------------------------------------------------------------------------------------------------------------------
| Feature | pcache (this patch) | bcache | dm-writecache |
|----------------------------------|---------------------------------|------------------------------|---------------------------|
| pmem access method | DAX | bio (block I/O) | DAX |
| Write latency (4 K rand-write) | ~5 µs | ~20 µs | ~5 µs |
| Concurrency | multi subtree index | global index tree | single tree + wc_lock |
| IOPS (4K randwrite, 32 numjobs) | 2.1 M | 352 K | 283 K |
| Read-cache support | YES | YES | NO |
| Deployment | no re-format of backend | backend devices must be | no re-format of backend |
| | | reformatted | |
| Write-back ordering | log-structured; | no ordering guarantee | no ordering guarantee |
| | preserves app-IO-order | | |
| Data integrity checks | metadata + data CRC(optional) | metadata CRC only | none |
---------------------------------------------------------------------------------------------------------------------------------
Signed-off-by: Dongsheng Yang <dongsheng.yang@linux.dev>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
