While updating the binary min-len implementation, I noticed that
the only user, should AFAICT be using exact-len instead.
In net/ipv4/fou_core.c FOU_ATTR_LOCAL_V6 and FOU_ATTR_PEER_V6
are only used for singular IPv6 addresses, and there are AFAICT
no known implementations trying to send more, it therefore
appears safe to change it to an exact-len policy.
This patch therefore changes the local-v6/peer-v6 attributes to
use an exact-len check, instead of a min-len check.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250902154640.759815-2-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull struct block_device getgeo changes from Al.
"switching ->getgeo() from struct block_device to struct gendisk
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>"
* tag 'pull-getgeo' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
block: switch ->getgeo() to struct gendisk
scsi: switch ->bios_param() to passing gendisk
scsi: switch scsi_bios_ptable() and scsi_partsize() to gendisk
Merge series from James Clark <james.clark@linaro.org>:
Improve usability of target mode by reporting FIFO errors and increasing
the buffer size when DMA is used. While we're touching DMA stuff also
switch to non-coherent memory, although this is unrelated to target
mode.
With the combination of the commit to increase the DMA buffer size and
the commit to use non-coherent memory, the host mode performance figures
are as follows on S32G3:
# spidev_test --device /dev/spidev1.0 --bpw 8 --size <test_size> --cpha --iter 10000000 --speed 10000000
Coherent (4096 byte transfers): 6534 kbps
Non-coherent: 7347 kbps
Coherent (16 byte transfers): 447 kbps
Non-coherent: 448 kbps
Just for comparison running the same test in XSPI mode:
4096 byte transfers: 2143 kbps
16 byte transfers: 637 kbps
These tests required hacking S32G3 to use DMA in host mode, although
the figures should be representative of target mode too where DMA is
used. And the other devices that use DMA in host mode should see similar
improvements.
Introduce a mechanism to detect and warn about prolonged interrupt handlers.
With a new command-line parameter (irqhandler.duration_warn_us=), users can
configure the duration threshold in microseconds when a warning in such
format should be emitted:
"[CPU14] long duration of IRQ[159:bad_irq_handler [long_irq]], took: 1330 us"
The implementation uses local_clock() to measure the execution duration of the
generic IRQ per-CPU event handler.
Signed-off-by: Wladislav Wiebe <wladislav.wiebe@nokia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/all/20250804093525.851-1-wladislav.wiebe@nokia.com
The old i.MX6 (over 10 years) chip use fsl,soc-operating-points to get
SoC's voltage and frequency information when cpu change frequency.
Set fsl,soc-operating-points deprecated.
Allow soc-supply property and set it deprecated.
Fix bunch of CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx6ul-prti6g.dtb: cpu@0 (arm,cortex-a7): Unevaluated properties are not allowed ('fsl,soc-operating-points', 'soc-supply' were unexpected)
from schema $id: http://devicetree.org/schemas/arm/cpus.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250827210912.92029-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add various vendor prefixes which are in use in compatible strings
already. These were found by modifying vendor-prefixes.yaml into a
schema to check compatible strings.
The added prefixes doesn't include various duplicate prefixes in use
such as "lge".
Link: https://lore.kernel.org/r/20250821222136.1027269-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Strings with commas were excluded from checks because yamllint had false
positives for flow style maps and sequences which need quotes when
values contain commas. This issue has been fixed as of the 1.34 release,
so drop the work-around.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240426195438.2771968-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Document established Devicetree bindings maintainers review practice:
1. Device node names should not be treated as an ABI, unless for
children of a device when documented.
There were many patches posted using of_find_node_by_name() or
of_node_name_eq() for accessing siblings or completely different
nodes. These cases were introducing undocumented ABI, so they are
discouraged.
2. 'simple-mfd' means children do not depend on parent device resources.
'simple-bus' is so simple, that even 'reg' properties are not
applicable.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250818132534.120217-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add vf610 reboot controller, which used to reboot whole system. Fix below
CHECK_DTB warnings:
arch/arm/boot/dts/nxp/vf/vf610-bk4.dtb: /soc/bus@40000000/src@4006e000:
failed to match any schema with compatible: ['fsl,vf610-src', 'syscon']
IC reference manual calls it as system reset controller(SRC), but it is not
module as reset controller, which used to reset individual device. SRC
works as reboot controller, which reboots whole system. It provides a
syscon interface to syscon-reboot.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250819165317.3739366-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Remove the implementation of use_carrier, the link monitoring
method that utilizes ethtool or ioctl to determine the link state of an
interface in a bond. Bonding will always behaves as if use_carrier=1,
which relies on netif_carrier_ok() to determine the link state of
interfaces.
To avoid acquiring RTNL many times per second, bonding inspects
link state under RCU, but not under RTNL. However, ethtool
implementations in drivers may sleep, and therefore this strategy is
unsuitable for use with calls into driver ethtool functions.
The use_carrier option was introduced in 2003, to provide
backwards compatibility for network device drivers that did not support
the then-new netif_carrier_ok/on/off system. Device drivers are now
expected to support netif_carrier_*, and the use_carrier backwards
compatibility logic is no longer necessary.
The option itself remains, but when queried always returns 1,
and may only be set to 1.
Link: https://lore.kernel.org/000000000000eb54bf061cfd666a@google.com
Link: https://lore.kernel.org/20240718122017.d2e33aaac43a.I10ab9c9ded97163aef4e4de10985cd8f7de60d28@changeid
Signed-off-by: Jay Vosburgh <jv@jvosburgh.net>
Reported-by: syzbot+b8c48ea38ca27d150063@syzkaller.appspotmail.com
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/2029487.1756512517@famine
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull sound fixes from Takashi Iwai:
"A collection of small changes including a few regression fixes:
- Regression fix for Intel SKL/KBL HD-audio bindings
- Regression fix for missing Nvidia HDMI codec entries after the
recent code reorganization
- A few TAS2781 codec regression fixes
- Fix for ASoC component lookup breakage
- Usual HD-audio, USB-audio and SOF quirk entries"
* tag 'sound-6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/hdmi: Add pin fix for another HP EliteDesk 800 G4 model
ALSA: usb-audio: Allow Focusrite devices to use low samplerates
ALSA: hda: tas2781: reorder tas2563 calibration variables
ALSA: hda: tas2781: fix tas2563 EFI data endianness
ALSA: firewire-motu: drop EPOLLOUT from poll return values as write is not supported
ALSA: docs: Add documents for recently changes in snd-usb-audio
ALSA: usb-audio: Add mute TLV for playback volumes on more devices
ASoC: SOF: Intel: WCL: Add the sdw_process_wakeen op
ALSA: hda: Avoid binding with SOF for SKL/KBL platforms
ASoC: rsnd: tidyup direction name on rsnd_dai_connect()
ALSA: hda/tas2781: Fix EFI name for calibration beginning with 1 instead of 0
ALSA: usb-audio: move mixer_quirks' min_mute into common quirk
ALSA: hda/realtek: Fix headset mic for TongFang X6[AF]R5xxY
ALSA: hda/hdmi: Restore missing HDMI codec entries
ASoC: codecs: idt821034: fix wrong log in idt821034_chip_direction_output()
ASoC: soc-core: tidyup snd_soc_lookup_component_nolocked()
ASoC: soc-core: care NULL dirver name on snd_soc_lookup_component_nolocked()
ALSA: hda: intel-dsp-config: Select SOF driver on MTL Chromebooks
ALSA: usb-audio: Add mute TLV for playback volumes on some devices
For some Ethernet controllers, the PTP timer function is not integrated.
Instead, the PTP timer is a separate device and provides PTP Hardware
Clock (PHC) to the Ethernet controller to use, such as NXP FMan MAC,
ENETC, etc. Therefore, a property is needed to indicate this hardware
relationship between the Ethernet controller and the PTP timer.
Since this use case is also very common, it is better to add a generic
property to ethernet-controller.yaml. According to the existing binding
docs, there are two good candidates, one is the "ptp-timer" defined in
fsl,fman-dtsec.yaml, and the other is the "ptimer-handle" defined in
fsl,fman.yaml. From the perspective of the name, the former is more
straightforward, so move the "ptp-timer" from fsl,fman-dtsec.yaml to
ethernet-controller.yaml.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250829050615.1247468-3-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
NXP NETC (Ethernet Controller) is a multi-function PCIe Root Complex
Integrated Endpoint (RCiEP), the Timer is one of its functions which
provides current time with nanosecond resolution, precise periodic
pulse, pulse on timeout (alarm), and time capture on external pulse
support. And also supports time synchronization as required for IEEE
1588 and IEEE 802.1AS-2020. So add device tree binding doc for the PTP
clock based on NETC Timer.
NETC Timer has three reference clock sources, but the clock mux is inside
the IP. Therefore, the driver will parse the clock name to select the
desired clock source. If the clocks property is not present, NETC Timer
will use the system clock of NETC IP as its reference clock. Because the
Timer is a PCIe function of NETC IP, the system clock of NETC is always
available to the Timer.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250829050615.1247468-2-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since the introduction of pid namespaces, their interaction with procfs
has been entirely implicit in ways that require a lot of dancing around
by programs that need to construct sandboxes with different PID
namespaces.
Being able to explicitly specify the pid namespace to use when
constructing a procfs super block will allow programs to no longer need
to fork off a process which does then does unshare(2) / setns(2) and
forks again in order to construct a procfs in a pidns.
So, provide a "pidns" mount option which allows such users to just
explicitly state which pid namespace they want that procfs instance to
use. This interface can be used with fsconfig(2) either with a file
descriptor or a path:
fsconfig(procfd, FSCONFIG_SET_FD, "pidns", NULL, nsfd);
fsconfig(procfd, FSCONFIG_SET_STRING, "pidns", "/proc/self/ns/pid", 0);
or with classic mount(2) / mount(8):
// mount -t proc -o pidns=/proc/self/ns/pid proc /tmp/proc
mount("proc", "/tmp/proc", "proc", MS_..., "pidns=/proc/self/ns/pid");
As this new API is effectively shorthand for setns(2) followed by
mount(2), the permission model for this mirrors pidns_install() to avoid
opening up new attack surfaces by loosening the existing permission
model.
In order to avoid having to RCU-protect all users of proc_pid_ns() (to
avoid UAFs), attempting to reconfigure an existing procfs instance's pid
namespace will error out with -EBUSY. Creating new procfs instances is
quite cheap, so this should not be an impediment to most users, and lets
us avoid a lot of churn in fs/proc/* for a feature that it seems
unlikely userspace would use.
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Link: https://lore.kernel.org/20250805-procfs-pidns-api-v4-2-705f984940e7@cyphar.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Samsung S3C24xx family of SoCs was removed from the Linux kernel in the
commit 61b7f8920b ("ARM: s3c: remove all s3c24xx support"), in January
2023. There are no in-kernel users of its compatibles.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
