ARMv8 Juno/Vexpress updates for v4.20
1. Enablement of scatter gather mode for CoreSight TMC-ETR routing
2. Usage of updated coresight graph bindings that eliminates loads of
dtc warnings
* tag 'juno-updates-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Enable coresight tmc scatter gather in ETR
arm64: dts: juno: Update entries to match latest coresight bindings
Signed-off-by: Olof Johansson <olof@lixom.net>
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 4.20, please pull the following:
- Stefan provides a reference to the Compute Module IO Board V3 such
that we can reference the arm counterpart and still build it for arm64
- Rob fixes I2C and SPI bus warnings which are going to show up with his
update to DTC scheduled for 4.20
* tag 'arm-soc/for-4.20/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: Fix I2C and SPI bus warnings
arm64: dts: broadcom: Add reference to Compute Module IO Board V3
Signed-off-by: Olof Johansson <olof@lixom.net>
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 4.20, please pull the following:
- Rafal updates the Broadcom BCM5301x (Northstar) DTS files to use the
new style partition parser and removes the unsupported/undocumented
linux,part-probe properties that were previously introduced
- Stefan adds supports for the Raspberry Pi Compute Module 3/3Lite, he
also updates the Raspberry Pi 3B+ USB Ethernet adapter to have proper
LED configuration
- Rob fixes a bunch of SPI bus warnings in the Northstar Plus and
Hurricane 2 DTS files
- Florian documents the Broadcom roboswitch Switch Register Access Block
(SRAB) interrupts, adds the switch interrupts to the Northstar Plus
DTS include file and finally updates the BCM958625HR reference board to
have the proper SFP module definition
* tag 'arm-soc/for-4.20/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm: Fix SPI bus warnings
ARM: dts: NSP: Wire up switch interrupts
dt-bindings: net: dsa: Document B53 SRAB interrupts and registers
ARM: dts: NSP: Enable SFP on bcm958625hr
ARM: dts: bcm283x-rpi-lan7515: Enable Ethernet LEDs
ARM: dts: BCM5301X: Specify flash partitions
ARM: dts: add Raspberry Pi Compute Module 3 and IO board
dt-bindings: bcm: Add Raspberry Pi CM3 and CM3L
Signed-off-by: Olof Johansson <olof@lixom.net>
New soc support for the px30 quad-core Cortex-A35.
New boards are the px30 eval board and roc-rk3399-pc.
The rk3328 got support for the one gpio controlled via the general
register files and the rk3399 finally got its idle-states defined.
And finally fixes and improvements for firefly-rk3399 (wifi),
roc-rk3328-cc (sdmmc-uhs, io-domains), rk3328-rock64 (gpio-regulator
pin fix) and rk3399-sapphire (gpio-regulator pin fix, pmic pin fix
and type-c port supply).
* tag 'v4.20-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add type-c port supply on rk3399-sapphire board
arm64: dts: rockchip: fix vcc_host1_5v pin assign on rk3328-rock64
arm64: dts: rockchip: add WiFi module support for Firefly-RK3399
arm64: dts: rockchip: remove dvs2 pinctrl from pmic on rk3399-sapphire
arm64: dts: rockchip: Fix VCC5V0_HOST_EN on rk3399-sapphire
arm64: dts: rockchip: re-order vcc_sys on rk3399-sapphire
arm64: dts: rockchip: add missing vop properties for px30
arm64: dts: rockchip: Add idle-states to device tree for rk3399
arm64: dts: rockchip: add sdmmc UHS support for roc-rk3328-cc
arm64: dts: rockchip: add GRF GPIO controller to rk3328
arm64: dts: rockchip: add io-domain to roc-rk3328-cc
arm64: dts: rockchip: add PX30 evaluation board devicetree
arm64: dts: rockchip: add core dtsi file for PX30 SoCs
dt-bindings: rockchip: grf: add grf and pmugrf description for px30
arm64: dts: rockchip: add support for ROC-RK3399-PC board
Signed-off-by: Olof Johansson <olof@lixom.net>
dtc has new checks for SPI buses. Fix the warnings in node names.
arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dtb: Warning (spi_bus_bridge): /axi@18000000/qspi@27200: node name for SPI buses should be 'spi'
arch/arm/boot/dts/bcm958525er.dtb: Warning (spi_bus_bridge): /axi/qspi@27200: node name for SPI buses should be 'spi'
arch/arm/boot/dts/bcm958525xmc.dtb: Warning (spi_bus_bridge): /axi/qspi@27200: node name for SPI buses should be 'spi'
arch/arm/boot/dts/bcm958622hr.dtb: Warning (spi_bus_bridge): /axi/qspi@27200: node name for SPI buses should be 'spi'
arch/arm/boot/dts/bcm958625hr.dtb: Warning (spi_bus_bridge): /axi/qspi@27200: node name for SPI buses should be 'spi'
arch/arm/boot/dts/bcm988312hr.dtb: Warning (spi_bus_bridge): /axi/qspi@27200: node name for SPI buses should be 'spi'
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Jon Mason <jonmason@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
dtc has new checks for I2C and SPI buses. Fix the warnings in node names
and unit-addresses.
arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dtb: Warning (i2c_bus_reg): /hsls/i2c@e0000/pcf8574@20: I2C bus unit address format error, expected "27"
arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dtb: Warning (i2c_bus_reg): /hsls/i2c@e0000/pcf8574@20: I2C bus unit address format error, expected "27"
arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dtb: Warning (spi_bus_bridge): /hsls/ssp@180000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dtb: Warning (spi_bus_bridge): /hsls/ssp@190000: node name for SPI buses should be 'spi'
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Jon Mason <jonmason@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This pull request brings in a board DT for the Raspberry Pi Compute
Module 3, its I/O board and enables the Ethernet LEDs for the RPi 3B+.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The Switch Register Access Block (SRAB) has one interrupt for link state
change on each ports (0-5, 7-8) a PHY interrupt, timestamping interrupt
and sleep timer interrupts for each management ports (5,7,8). Wire those
up so we can utilize them to speed up link resolution.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Document the Broadcom roboswitch Switch Register Access Block interrupt
lines and additional register base addresses for port mux configuration
and SGMII status/configuration registers.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Enable the SFP connected to port 5 of the switch and wire up all GPIOs
to the SFP cage. Because of a hardware limitation of the i2c controller
on the iProc SoCs which prevents large i2c (> 63 bytes) transactions to
work, we use the i2c-gpio interface instead, which does not have that
limitation. This allows us to read the SFP module EEPROM, which would
not be possible otherwise since it exceeds that size during a single
read transfer.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
The order between "syscon" and "simple-mfd" is important because in these
particular cases, the node needs to be first a "simple-mfd" to expose
it's sub-nodes, and later on a "syscon" to permit other nodes to access
this register space through the "syscon" mechanism.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
- Device nodes with unit addresses are sorted by unit address,
- Device nodes without unit addresses and references are sorted
alphabetically.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Successfully tested on H3 ES1.0 and ES2.0, M3-W ES1.0, and M3-N ES1.0.
Even previously stubborn cards work fine. Transfer rates were >60MB/s.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the device nodes for all MSIOF SPI controllers, incl. clocks, power
domains, and resets properties.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the device node for the external SCIF_CLK, and describe the clock
inputs for the Baud Rate Generator for External Clock (BRG) for SCIF2,
which can increase serial clock accuracy.
The presence of the SCIF_CLK crystal and its clock frequency depend on
the actual board.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[geert: Enhance patch description]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Use the SoC-specific CPG/MSSR include file to allow future use of
R8A77990_CLK_* symbols.
Replace the hardcoded power domain indices by R8A77990_PD_* symbols.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The comments describing the non-default switch settings to use SATA are
confusing: 'Off' refers to the switch position, not to the MD12 logic
value, while the parentheses suggest otherwise. Rephrase to fix this.
Fixes: bec000784d5bb571 ("arm64: dts: renesas: salvator-xs: enable SATA")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This is based on the existing KF device tree sources:
$ ls -1 arch/arm64/boot/dts/renesas/*-kf.dts
arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add FCPF and FCPV instances to the r8a774a1 dtsi, similarly
to what was done for the r8a7796 with commit 41dbbf0c5b
("arm64: dts: r8a7796: Add FCPF and FCPV instances"),
commit 69490bc966 ("arm64: dts: renesas: r8a7796: Point
FDP1 via FCPF to IPMMU-VI0"), and commit cef942d0bd ("arm64:
dts: renesas: r8a7796: Point VSPI via FCPVI to IPMMU-VC0").
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This patch adds definitions for L2 cache for the Cortex-A53 CPU
cores (512 KiB in size, organized as 32 KiB x 16 ways), adds
Cortex-A53 CPU cores (setting a total of 6 cores, 2 x Cortex-A57
+ 4 x Cortex-A53), and finally enables the performance monitor
unit for the Cortex-A53 cores on the R8A774A1 SoC.
Based on work done for r8a7796 SoC.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
