Fix the below checkpatch errors & warnings:
ERROR: that open brace { should be on the previous line
ERROR: space prohibited before that ',' (ctx:WxV)
ERROR: space required after that ',' (ctx:WxV)
ERROR: code indent should use tabs where possible
ERROR: switch and case should be at the same indent
WARNING: please, no spaces at the start of a line
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: space prohibited before semicolon
WARNING: Block comments use a trailing */ on a separate line
WARNING: Block comments use * on subsequent lines
WARNING: braces {} are not necessary for any arm of this statement
WARNING: Missing a blank line after declarations
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the below checkpatch warnings:
WARNING: static const char * array should probably be static const char * const
+static const char *gfxhub_client_ids[] = {
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
+ unsigned i;
WARNING: static const char * array should probably be static const char * const
+static const char *gfxhub_client_ids[] = {
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
+ unsigned i;
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In restore process worker, pinned BO cause update PTE fail, then
the function re-schedule the restore_work. This will generate dead loop.
Signed-off-by: gaba <gaba@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v1:
the dceflck sysnode is not aviable on GFX v9.4.3 chip.
v2:
simplify code logic using helper function: amdgpu_device_has_display_hardware().
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the smu driver_table is used for all types of smu
tables data transcation (e.g: PPtable, Metrics, i2c, Ecc..).
it is necessary to hold this lock to avoiding data tampering
during the i2c read operation.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix below checkpatch warnings:
WARNING: quoted string split across lines
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: void function return statements are not generally useful
WARNING: braces {} are not necessary for any arm of this statement
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the below checkpatch warnings:
WARNING: static const char * array should probably be static const char * const
+static const char *gfxhub_client_ids[] = {
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
+ unsigned i;
WARNING: Missing a blank line after declarations
+ int i;
+ adev->gmc.VM_L2_CNTL = RREG32_SOC15(GC, 0, mmGCVM_L2_CNTL);
WARNING: Missing a blank line after declarations
+ int i;
+ WREG32_SOC15(GC, 0, mmGCVM_L2_CNTL, adev->gmc.VM_L2_CNTL);
WARNING: braces {} are not necessary for single statement blocks
+ if (!time) {
+ DRM_WARN("failed to wait for GRBM(EA) idle\n");
+ }
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix below checkpatch errors & warnings:
ERROR: trailing statements should be on next line
+ default: BUG();
ERROR: trailing statements should be on next line
WARNING: braces {} are not necessary for single statement blocks
WARNING: braces {} are not necessary for any arm of this statement
WARNING: Block comments use * on subsequent lines
WARNING: Missing a blank line after declarations
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the below checkpatch warnings:
WARNING: static const char * array should probably be static const char * const
+static const char *gfxhub_client_ids[] = {
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
+ unsigned i;
WARNING: Missing a blank line after declarations
+ u32 tmp;
+ tmp = RREG32_SOC15(GC, 0, mmGCVM_L2_PROTECTION_FAULT_CNTL);
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the below checkpatch warnings:
WARNING: Block comments should align the * on each line
+ /*
+ * Raven2 has a HW issue that it is unable to use the
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
+ unsigned num_level, block_size;
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
+ unsigned i;
WARNING: Missing a blank line after declarations
+ u32 tmp;
+ tmp = RREG32_SOC15(GC, 0, mmVM_L2_PROTECTION_FAULT_CNTL);
WARNING: Block comments should align the * on each line
+ /*
+ * Raven2 has a HW issue that it is unable to use the
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
+ unsigned num_level, block_size;
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
It is possible to commit state multiple times in rapid succession with
FAMS enabled; if each of these commits were to set optimized_required,
then the user may see latency.
[HOW]
fw_based_mclk_switching is currently not used in dc->clk_mgr; use it
to track whether the current state has FAMS enabled;
if it has, then do not disable FAMS in prepare_bandwidth, and do not set
optimized_required.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When removing the tidss driver, there is a warning reported by
kernel about an unhandled interrupt for mhdp driver.
[ 43.238895] irq 31: nobody cared (try booting with the "irqpoll" option)
... [snipped backtrace]
[ 43.330735] handlers:
[ 43.333020] [<000000005367c4f9>] irq_default_primary_handler threaded [<000000007e02b601>]
cdns_mhdp_irq_handler [cdns_mhdp8546]
[ 43.344607] Disabling IRQ #31
This happens because as part of cdns_mhdp_bridge_hpd_disable, driver tries
to disable the interrupts. While disabling the SW_EVENT interrupts,
it accidentally enables the MBOX interrupts, which are not handled by
the driver.
Fix this with a read-modify-write to update only required bits.
Use the enable / disable function as required in other places.
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Reviewed-by: Swapnil Jakhade <sjakhade@cadence.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606082142.23760-9-a-bhatia1@ti.com
With the new encoder/bridge chain model, the display controller driver
is required to create a drm_connector entity instead of asking the
bridge to do so during drm_bridge_attach. Moreover, the controller
driver should create a drm_bridge entity to negotiate bus formats and a
'simple' drm_encoder entity to expose it to userspace.
Update the encoder/bridge initialization sequence in tidss as per the
new model.
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606082142.23760-8-a-bhatia1@ti.com
With new connector model, sii902x will not create the connector, when
DRM_BRIDGE_ATTACH_NO_CONNECTOR is set and SoC driver will rely on format
negotiation to setup the encoder format.
Support format negotiations hooks in the drm_bridge_funcs.
Use helper functions for state management.
Input format is selected to MEDIA_BUS_FMT_RGB888_1X24 as default, as is
the case with older model.
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606082142.23760-6-a-bhatia1@ti.com
With new connector model, mhdp bridge will not create the connector and
SoC driver will rely on format negotiation to setup the encoder format.
Support minimal format negotiations hooks in the drm_bridge_funcs.
Complete format negotiation can be added based on EDID data.
This patch adds the minimal required support to avoid failure
after moving to new connector model.
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
[a-bhatia1: Drop the output_fmt check condition]
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230606082142.23760-4-a-bhatia1@ti.com
We are currently having FIFO underruns happening for kms_dsc test case,
problem is that, we check if curreny cdclk is >= pixel rate only if
there is a single VDSC engine enabled(i.e dsc_split=false) however if
we happen to have 2 VDSC engines enabled, we just kinda rely that this
would be automatically enough.
However pixel rate can be even >= than VDSC clock(cdclk) * 2, so in that
case even with 2 VDSC engines enabled, we still need to tweak it up.
So lets compare pixel rate with cdclk * VDSC engine count and
check if it still requires bumping up.
Previously we had to bump up CDCLK many times for similar reasons.
v2: - Use new intel_dsc_get_num_vdsc_instances to determine number of VDSC
engines, instead of slice count(Ankit Nautiyal)
v3: - s/u8/int/ (Jani Nikula)
v4: - Remove slice count mentions(Ankit Nautiyal)
- Use DIV_ROUND_UP in order to make sure that resulting CDCLK would
be always >= than required, after division(Ankit Nautiyal)
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230704131758.14024-3-stanislav.lisovskiy@intel.com
The hardware needs a FB which is packed. Add checks to make sure
this is the case.
While at it, add debug logs for the existing checks. This allows
user-space to more easily figure out why a configuration is
rejected.
v2:
- Use drm_format_info instead of hardcoding bytes-per-pixel (Ilia)
- Remove unnecessary size check (Ilia)
v3:
- Add missing newlines in debug messages (Lyude)
- Use NV_ATOMIC (Lyude)
- Add missing debug log for invalid format (Ilia)
v4: add plane name in debug messages (Ilia)
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210205224140.28174-1-contact@emersion.fr
We don't want to create a fence for every command submission. It's
only necessary when userspace provides a waitable token for submission.
This could be:
1) bo_handles, to be used with VIRTGPU_WAIT
2) out_fence_fd, to be used with dma_fence apis
3) a ring_idx provided with VIRTGPU_CONTEXT_PARAM_POLL_RINGS_MASK
+ DRM event API
4) syncobjs in the future
The use case for just submitting a command to the host, and expecting
no response. For example, gfxstream has GFXSTREAM_CONTEXT_PING that
just wakes up the host side worker threads. There's also
CROSS_DOMAIN_CMD_SEND which just sends data to the Wayland server.
This prevents the need to signal the automatically created
virtio_gpu_fence.
In addition, VIRTGPU_EXECBUF_RING_IDX is checked when creating a
DRM event object. VIRTGPU_CONTEXT_PARAM_POLL_RINGS_MASK is
already defined in terms of per-context rings. It was theoretically
possible to create a DRM event on the global timeline (ring_idx == 0),
if the context enabled DRM event polling. However, that wouldn't
work and userspace (Sommelier). Explicitly disallow it for
clarity.
Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> # edited coding style
Link: https://patchwork.freedesktop.org/patch/msgid/20230707213124.494-1-gurchetansingh@chromium.org
Fixes the following build errors on arm64:
drivers/video/fbdev/hyperv_fb.c: In function 'hvfb_getmem':
>> drivers/video/fbdev/hyperv_fb.c:1033:24: error: 'screen_info' undeclared (first use in this function)
1033 | base = screen_info.lfb_base;
| ^~~~~~~~~~~
drivers/video/fbdev/hyperv_fb.c:1033:24: note: each undeclared identifier is reported only once for each function it appears in
>> drivers/gpu/drm/hyperv/hyperv_drm_drv.c:75:54: error: 'screen_info' undeclared (first use in this function)
75 | drm_aperture_remove_conflicting_framebuffers(screen_info.lfb_base,
| ^~~~~~~~~~~
drivers/gpu/drm/hyperv/hyperv_drm_drv.c:75:54: note: each undeclared identifier is reported only once for each function it appears in
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307090823.nxnT8Kk5-lkp@intel.com/
Fixes: 81d2393485 ("fbdev/hyperv-fb: Do not set struct fb_info.apertures")
Fixes: 8b0d13545b ("efi: Do not include <linux/screen_info.h> from EFI header")
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230709100514.703759-1-suijingfeng@loongson.cn
[WHY]
Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a
pipe commit can cause underflow.
[HOW]
Move DMUB p-state delegate into optimze_bandwidth; enabling FAMS sets
optimized_required.
This change expects that Freesync requests are blocked when
optimized_required is true.
Fixes: 613a7956de ("drm/amd/display: Add monitor specific edid quirk")
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix below checkpatch error & warnings:
ERROR: that open brace { should be on the previous line
WARNING: static const char * array should probably be static const char * const
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the SVM range has no GPU access nor access-in-place attribute,
validate and map to GPU should skip the range.
Add NULL pointer check if find_first_bit(ctx->bitmap, MAX_GPU_INSTANCE)
returns MAX_GPU_INSTANCE as gpuidx if ctx->bitmap is empty.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When kfd uses cpu to update vm iterates all current PDs/PTs bos, adds
AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED flag and kmap them to kernel virtual
address space before kfd updates the vm that was created by gfx.
Signed-off-by: Xiaogang Chen <Xiaogang.Chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, we unmap HIQ by directly writing to HQD
registers. This doesn't work for GFX9.4.3. Instead,
use KIQ to unmap HIQ, similar to how we use KIQ to
map HIQ. Using KIQ to unmap HIQ works for all GFX
series post GFXv9.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
