Most of the context workarounds tweak masked registers, but not all. For
masked registers, when writing the value it's sufficient to just write
the wa->set_bits since that will take care of both the clr and set bits
as well as not overwriting other bits.
However there are some workarounds, the registers are non-masked. Up
until now the driver was simply emitting a MI_LOAD_REGISTER_IMM with the
set_bits to program the register via the GPU in the WA bb. This has the
side effect of overwriting the content of the register outside of bits
that should be set and also doesn't handle the bits that should be
cleared.
Kenneth reported that on DG2, mesa was seeing a weird behavior due to
the kernel programming of L3SQCREG5 in dg2_ctx_gt_tuning_init(). With
the GPU idle, that register could be read via intel_reg as 0x00e001ff,
but during a 3D workload it would change to 0x0000007f. So the
programming of that tuning was affecting more than the bits in
L3_PWM_TIMER_INIT_VAL_MASK. Matt Roper noticed the lack of rmw for the
context workarounds due to the use of MI_LOAD_REGISTER_IMM.
So, for registers that are not masked, read its value via mmio, modify
and then set it in the buffer to be written by the GPU. This should take
care in a simple way of programming just the bits required by the
tuning/workaround. If in future there are registers that involved that
can't be read by the CPU, a more complex approach may be required like
a) issuing additional instructions to read and modify; or b) scan the
golden context and patch it in place before saving it; or something
else. But for now this should suffice.
Scanning the context workarounds for all platforms, these are the
impacted ones with the respective registers
mtl: DRAW_WATERMARK
mtl/dg2: XEHP_L3SQCREG5, XEHP_FF_MODE2
ICL has some non-masked registers in the context workarounds:
GEN8_L3CNTLREG, IVB_FBC_RT_BASE and VB_FBC_RT_BASE_UPPER, but there
shouldn't be an impact. The first is already being manually read and the
other 2 are intentionally overwriting the entire register. Same
reasoning applies to GEN12_FF_MODE2: the WA is intentionally
overwriting all the bits to avoid a read-modify-write.
v2: Reword commit message wrt GEN12_FF_MODE2 and the changed behavior
on preparatory patches.
v3: Also skip reading if clear|set bits covers everything
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Matt Roper <matthew.d.roper@intel.com>
Link: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/23783#note_1968971
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230630203509.1635216-4-lucas.demarchi@intel.com
Right now context workarounds don't do a rmw and instead only write to
the register. Since 2 separate programmings to the same register are
coalesced into a single write, this is not problematic for
GEN12_FF_MODE2 since both TDS and GS timer are going to be written
together and the other remaining bits be zeroed.
However in order to fix other workarounds that may want to preserve the
unrelated bits in the same register, context workarounds need to
be changed to a rmw. To prepare for that, move the programming of
GEN12_FF_MODE2 to a single place so the value passed for "clear" can
be all the bits. Otherwise the second workaround would be dropped as
it'd be detected as overwriting a previously programmed workaround.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230630203509.1635216-3-lucas.demarchi@intel.com
Wait until the command transfer FIFO is empty before loading in the next
command. The previous behavior where the code waited until command transfer
FIFO was not full suffered from transfer corruption, where the last command
in the FIFO could be overwritten in case the FIFO indicates not full, but
also does not have enough space to store another transfer yet.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> # imx8mm-icore
Link: https://patchwork.freedesktop.org/patch/msgid/20230615201511.565923-1-marex@denx.de
fence Decrements the reference count before exiting.
Avoid Race Vulnerabilities for fence use-after-free.
v2 (chk): actually fix the use after free and not just move it.
Signed-off-by: shanzhulig <shanzhulig@gmail.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
An intentional delay is added on soft ctf triggered. Then there will
be a double check for the GPU temperature before taking further
action. This can avoid unintended shutdown due to temperature
momentary fluctuation.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Preparation for coming optimization which eliminates the influence of
GPU temperature momentary fluctuation.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following:
- Improve debugging mechanism for Gaming FAMS
- Add monitor specific edid quirks
- Fixes for Phantom pipe
- Fixes for Shapper LUT
- Clean up asserts
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- A full update is required if the number of planes for a given
stream changes
- The new fast update path only checked for stream and plane updates,
but there could be a plane addition or removal without one of the
stream and plane updates triggering a full update
- Add an explicit check for number of planes changing for a full update
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- We want to limit the new fast update path to address and gamma updates
only.
- Add a check in dc_update_planes_and_stream to only take the new fast
update path if we only have the specific fast updates defined.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The shaper LUT requires a 10-bit value of the delta between segments. We
were using dc_fixpt_clamp_u0d10() to do that but it doesn't do what we
want it to do. It will preserve 10-bit precision after the decimal
point, but that's not quite what we want. We want 14-bit precision and
discard the 4 most-significant bytes.
To do that we'll do dc_fixpt_clamp_u0d14() & 0x3ff instead.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If shaper and 3D LUT data updates, lut_3d bit in update_flag is updated
and we need to call set_input_transfer_func to program DPP shaper and 3D
LUTs. Small cleanup of code style in the related if-condition.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to unpause dpg first, or it will hit follow error during stop dpg:
"[drm] Register(1) [regUVD_POWER_STATUS] failed to reach value 0x00000001 != 0x00000000n"
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So we can selectively enable it on certain devices. No
intended functional change.
Reviewed-and-tested-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PSP functions are already set by psp_early_init() so initializing
them a second time is unnecessary.
No intended functional changes.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This display doesn't properly indicate link loss through DPCD bits such
as CR_DONE / CHANNEL_EQ_DONE / SYMBOL_LOCKED / INTERLANE_ALIGN_DONE,
which all remain set.
In addition, DPCD200Eh doesn't match the value of DPCD204h in all cases.
For these reasons, we can miss re-training the link, since we don't
properly detect link loss with this display.
[Why]
Add display-specific workaround to read DPCD204h, so that we can detect
link loss based on 128b132b-specific status bits in this register.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For GFX 9.4.3, interrupt handling needs to be updated for:
- Interrupt cookie will have a NodeId field. Each KFD
node needs to check the NodeId before processing the
interrupt.
- For CPX mode, there are additional checks of client ID
needed to process the interrupt.
- Add NodeId to the process drain interrupt.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, it is possible for us to access memory that we shouldn't.
Since, we acquire (possibly dangling) pointers to dirty rectangles
before doing a bounds check to make sure we can actually accommodate the
number of dirty rectangles userspace has requested to fill. This issue
is especially evident if a compositor requests both MPO and damage clips
at the same time, in which case I have observed a soft-hang. So, to
avoid this issue, perform the bounds check before filling a single dirty
rectangle and WARN() about it, if it is ever attempted in
fill_dc_dirty_rect().
Cc: stable@vger.kernel.org # 6.1+
Fixes: 30ebe41582 ("drm/amd/display: add FB_DAMAGE_CLIPS support")
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sdma halt/unhalt is performed by psp when frontdoor
loading used,so this can be skipped.
v2: Instead of removing halt/unhalt completely,
driver will do it only during backdoor load.
Signed-off-by: Mangesh Gadre <Mangesh.Gadre@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
