ASPEED device tree updates for 6.14
- New machines
* IBM SPB1 AST2600 BMC machine, a Sapphire Rapids x86 server
* Ampre Mt Jefferson AST2600 BMC
- Updates to mtmitchell, rainier, blueridge, everest, fuji, system1,
harma, catalina and minerva
- A big rework of yosemite4
* tag 'aspeed-6.14-devicetree' of https://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: (55 commits)
ARM: dts: aspeed: yosemite4: adjust secondary flash name
ARM: dts: aspeed: system1: Use crps PSU driver
ARM: dts: aspeed: minerva: add second source RTC
ARM: dts: aspeed: minerva: add bmc ready led setting
ARM: dts: aspeed: minerva: add i/o expanders on each FCB
ARM: dts: aspeed: minerva: add i/o expanders on bus 0
ARM: dts: aspeed: catalina: remove interrupt of GPIOB4 form all IOEXP
ARM: dts: aspeed: catalina: revise ltc4287 shunt-resistor value
arm: dts: aspeed: Blueridge and Rainer: Add VRM presence GPIOs
ARM: dts: aspeed: Blueridge and Fuji: Fix LED node names
arm: dts: aspeed: Everest and Fuji: Add VRM presence gpio expander
ARM: dts: aspeed: sbp1: IBM sbp1 BMC board
dt-bindings: arm: aspeed: add IBM SBP1 board
ARM: dts: aspeed: Add device tree for Ampere's Mt. Jefferson BMC
dt-bindings: arm: aspeed: add Mt. Jefferson board
ARM: dts: aspeed: yosemite4: Add i2c-mux for ADC monitor on Spider Board
ARM: dts: aspeed: yosemite4: Revise adc128d818 adc mode on Fan Boards
ARM: dts: aspeed: yosemite4: Change the address of Fan IC on fan boards
ARM: dts: aspeed: yosemite4: Revise address of i2c-mux for two fan boards
ARM: dts: aspeed: yosemite4: correct the compatible string for max31790
...
Link: https://lore.kernel.org/r/CACPK8Xe8yZLXzEQPp=1D2f0TsKA7hBZG=pHHW6U51FMpp_BiRQ@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm Arm64 DeviceTree updates for v6.14
This adds support for the new Snapdragon 8 Elite platform with MTP and
QRD boards, QCS615 platform with the Ride board, QCS8300 platform with
its Ride board, IPQ5424 platform with the RDP466 board, MSM8917 platform
with Xiaomi Redmi 5A, and the SAR2130P platform with the Snapdragon AR2
Gen1 Smart Viewer Development Kit.
On X Elite the HP Omnibook X laptop and the Snapdragon Devkit are added.
The 8cx Gen3-based Huawaei Matebook E Go and Microsoft Windows Dev Kit
2023 are introduced.
IPQ9574 gains PCIe and TRNG descriptions, together with a few other
smaller improvements. TRNG is also enabled on the IPQ5332 platform.
On MSM8994, Huawei Nexus 6P gains power and volume keys support. USB
interrupts are corrected.
On QCM6490 the FairPhone 5 gains camera EEPROM and Rb3Gen2 development
kit gains description of the onboard LEDs.
On QRB4210 RB2 support for HDMI audio playback is added.
SA8775P gains missing clock controllers, CPUs are tied to PSCI power
domains, DisplayPort is introduced and enabled on the Ride board.
On SDM670 the GPU components are described and enabled for Google Pixel
3a, together with camera clock controller and flash LED.
Xiaomi Mi Pad 5 Pro, on SM8250, gets WiFi and Bluetooth enabled.
"global" IRQ for PCIe RC controllers are described on SM8550 and SM8650,
to allow for hotplug events.
Coresight support is added for SM8450, SM8650, X 1 Elite, QCS615,
and QCS8300.
The X Elite platform gains QUP power domains and OPPs, another PCIe
controller, another UART, and its SDHCI controllers. The ASUS Vivobook S
15 gets GPU and lid switch enabled. Microsoft Surface Laptop 7 gains
audio configuration, SD card reader support, and USB retimers. The
Lenovo Yoga Slim 7x gets its LID switch described. Dell XPS 13 gains
retimers described. The Lenovo Thinkpad T14s has additional USB ports
enabled, as well as sound and fingerprint sensor.
USB U1/U2 entry is disabled across a variety of platforms, to improve
USB stability.
sleep clock frequencies are reviewed and corrected for a variety of
platforms, so is also various remoteproc mmio address ranges.
* tag 'qcom-arm64-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (240 commits)
arm64: dts: qcom: x1e80100-romulus: Update firmware nodes
arm64: dts: qcom: msm8916-samsung-serranove: Add display panel
arm64: dts: qcom: sm8650: Add 'global' interrupt to the PCIe RC nodes
arm64: dts: qcom: sm8550: Add 'global' interrupt to the PCIe RC nodes
arm64: dts: qcom: Remove unused and undocumented properties
arm64: dts: qcom: sdm450-lenovo-tbx605f: add DSI panel nodes
arm64: dts: qcom: pmi8950: add LAB-IBB nodes
arm64: dts: qcom: ipq5424: enable the download mode support
arm64: dts: qcom: ipq5424: add scm node
arm64: dts: qcom: sm8250: Fix interrupt types of camss interrupts
arm64: dts: qcom: sdm845: Fix interrupt types of camss interrupts
arm64: dts: qcom: sc8280xp: Fix interrupt type of camss interrupts
arm64: dts: qcom: qcs8300-ride: Enable USB controllers
arm64: dts: qcom: qcs8300: Add support for usb nodes
arm64: dts: qcom: qcs8300: Add support for clock controllers
arm64: dts: qcom: sm8450: Add coresight nodes
arm64: dts: qcom: sa8775p: Fix the size of 'addr_space' regions
arm64: dts: qcom: qcs615-ride: Enable UFS node
arm64: dts: qcom: qcs615: add UFS node
arm64: dts: qcom: ipq5424: Add USB controller and phy nodes
...
Link: https://lore.kernel.org/r/20250111181025.394631-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm Arm32 DeviceTree updates for v6.14
Describe the interconnect paths for PCIe EP controllers on SDX55 and
SDX65. Disable USB U1/U2 entry to improve USB stability on the same.
* tag 'qcom-arm32-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: sdx55: Disable USB U1/U2 entry
ARM: dts: qcom: sdx65: Disable USB U1/U2 entry
ARM: dts: qcom: sdx55: Add CPU PCIe EP interconnect path
ARM: dts: qcom: sdx65: Add PCIe EP interconnect path
Link: https://lore.kernel.org/r/20250111171126.369502-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New boards rk3576-evb1, H96 Max V58 TV Box (rk3588), BigTreeTech CB2
(SoM + baseboard) and Pi2 (SBC), Firefly ITX-3588J (Core-3588J SoM),
Orange Pi 5 Max.
A interesting case is the Radxa E52C using a soc called rk3582. This is
rk3588-variant where some cpu cores are disabled during production and
the bootloader needs to read the available cores from efuses and adapt
the DT it hands over to the kernel.
New supported peripherals are just the naneng combophy + the usb
controllers using them on the rk3576 as well as the arm,smmu attached
to the PCI controller on rk3588.
And finally there are of course a number of board-specific enablements
and refinements (MCU on Qnap-TS433, USB3 on NanoPi R6C/R6S and Orange Pi
5+ etc.
* tag 'v6.14-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (31 commits)
arm64: dts: rockchip: add DTs for Firefly ITX-3588J and its Core-3588J SoM
dt-bindings: arm: rockchip: Add Firefly ITX-3588J board
arm64: dts: rockchip: Add Orange Pi 5 Max board
dt-bindings: arm: rockchip: Add Xunlong Orange Pi 5 Max
arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi
arm64: dts: rockchip: add WLAN to rk3588-evb1 controller
arm64: dts: rockchip: increase gmac rx_delay on rk3399-puma
arm64: dts: rockchip: Delete redundant RK3328 GMAC stability fixes
arm64: dts: rockchip: enable hdmi out audio on wolfvision pf5
arm64: dts: rockchip: fix num-channels property of wolfvision pf5 mic
arm64: dts: rockchip: Enable the USB 3.0 port on NanoPi R6C/R6S
arm64: dts: rockchip: Add FRAM MB85RS128TY to rk3568-mecsbc
arm64: dts: rockchip: Remove unused i2c2 node from rk3568-mecsbc
arm64: dts: rockchip: Fix PCIe3 handling for Edgeble-6TOPS Modules
arm64: dts: rockchip: Add Radxa E52C
dt-bindings: arm: rockchip: Add Radxa E52C
arm64: dts: rockchip: Add BigTreeTech CB2 and Pi2
dt-bindings: arm: rockchip: Add BigTreeTech CB2 and Pi2
arm64: dts: rockchip: Enable USB 3.0 ports on orangepi-5-plus
arm64: dts: rockchip: Add H96 Max V58 TV Box based on RK3588 SoC
...
Link: https://lore.kernel.org/r/2193001.3Lj2Plt8kZ@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
arm64: tegra: Device tree fixes for v6.14-rc1
These patches fix up an issue with the DMA support on one of the SPI
controllers, as well as properly identify the SCE fabric and disable
it to prevent accessing registers that may not be accessible to the
CPU. Finally, the GIC's #address-cells property is set to 0 to fix a
problem in the PCIe interrupt-map property.
* tag 'tegra-for-6.14-arm64-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Fix Tegra234 PCIe interrupt-map
arm64: tegra: Disable Tegra234 sce-fabric node
arm64: tegra: Fix typo in Tegra234 dce-fabric compatible
arm64: tegra: Fix DMA ID for SPI2
Link: https://lore.kernel.org/r/20250110185355.4143505-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM64-based SoCs Device Tree updates
for 6.14:
- Dave adds the display pipeline DT nodes on BCM2712 (Raspberry Pi 5)
- Rob removes some undocumented properties
- Same ensures that the CFE stub area is reserved to allow secondary
CPUs to be successfully brought up in Linux, also making sure that the
address used in the spin table is also carved out. Finally he adds
support for the Zyxel EX3510-B router using BCM4906
- Rosen converts the BCM4908 platforms to use the more flexible
nvmem-layout representation
* tag 'arm-soc/for-6.14/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: bcm4908: nvmem-layout conversion
arm64: dts: broadcom: bcmbca: bcm4908: Add DT for Zyxel EX3510-B
dt-bindings: arm64: bcmbca: Add Zyxel EX3510-B based on BCM4906
arm64: dts: broadcom: bcmbca: bcm4908: Protect cpu-release-addr
arm64: dts: broadcom: bcmbca: bcm4908: Reserve CFE stub area
arm64: dts: broadcom: Remove unused and undocumented properties
arm64: dts: broadcom: Add DT for D-step version of BCM2712
arm64: dts: broadcom: Add display pipeline support to BCM2712
arm64: dts: broadcom: Add firmware clocks and power nodes to Pi5 DT
Link: https://lore.kernel.org/r/20250109224756.3632025-2-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM-based SoCs Device Tree updates
for 6.14, please pull the following:
- Rob removes some unused and undocumented properties pertaining to the
SPI flash controller on Broadcom boards
- Linus adds a number of BCM6846 peripherals: HWRNG, watchdog, GPIO,
MDIO, LED controller, DMA and then proceeds with adding support for
the GEnexsis XG6846B PON router
- Rosen sets the MAC address NVMEM reference on the Meraki MR26 platform
* tag 'arm-soc/for-6.14/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: meraki-mr26: set mac address for gmac0
ARM: dts: broadcom: Add Genexis XG6846B DTS file
dt-bindings: arm: bcmbca: Add Genexis XG6846B
dt-bindings: vendor-prefixes: Add Genexis
ARM: dts: bcm6846: Add ARM PL081 DMA block
ARM: dts: bcm6846: Add LED controller
ARM: dts: bcm6846: Add MDIO control block
ARM: dts: bcm6846: Add GPIO blocks
ARM: dts: bcm6846: Enable watchdog
ARM: dts: bcm6846: Add iproc rng
arm: dts: broadcom: Remove unused and undocumented properties
Link: https://lore.kernel.org/r/20250109224756.3632025-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Allwinner Device Tree changes for 6.14
- Add support for DMA engine and audio codec on F1C100s
and enable audio codec on Lichee Pi Nano
- Add syscon and SRAM nodes for A100
- Enable CPU DVFS for Tanix TX1
- Explicitly configure TCON0 pixel clock parent according to display
output used
This includes one commit shared with the clock tree
dt-bindings: clock: sunxi: Export PLL_VIDEO_2X and PLL_MIPI
which adds the macros for the TCON0 pixel clock parents.
* tag 'sunxi-dt-for-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a64: explicitly assign clock parent for TCON0
dt-bindings: clock: sunxi: Export PLL_VIDEO_2X and PLL_MIPI
arm64: dts: allwinner: h313: enable DVFS for Tanix TX1
arm64: dts: allwinner: a100: Add syscon nodes
dt-bindings: sram: sunxi-sram: Add A100 compatible
ARM: dts: suniv: f1c100s: Activate Audio Codec for Lichee Pi Nano
ARM: dts: suniv: f1c100s: Add support for Audio Codec
ARM: dts: suniv: f1c100s: Add support for DMA
Link: https://lore.kernel.org/r/Z36h2FwUxro8rouO@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
MediaTek ARM64 DeviceTree updates for v6.14
This adds a few cleanups, enhances support for upstreamed SoCs
and machines, other than adding new ones.
In particular, fixes and improvements:
- MT8516 gets a few fixes for GICv2, Watchdog and I2C, and
support for the Keypad controller;
- MT8390 Genio 700 board gets basic audio support;
- MT8365 gets an alias for its integrated ethernet controller;
- MT8195 gets an important fix for system suspend: all of the
machines based on this SoC and its IoT variant can now
properly perform PM Suspend to RAM;
- MT8188 gets support for its Mali GPU with DVFS and a fix for
the OVL Hardware found in the Display Controller using the
right compatible strings;
- MT8186 Chromebooks can now suspend properly thanks to a fix
moving the USB wakeups from XHCI to MTU3 (USB) controller;
- MT8183 Chromebooks get a fix for their DMIC microphone and
proper support for their second-source touchscreen;
- MT7988 SoC and the BananaPi R4 board gets support for Pinctrl,
eMMC/SD, Thermal, CPU DVFS, PCI-Express, and peripherals like
the RT5190A PMIC, PCA9545 I2C mux, and others;
- MT7986 BananaPi R3 board gets support for SATA power socket;
And cleanups:
- Dropped regulator-compatible property from MediaTek DTs;
- Aligned thermal node names with bindings on MT8183 Kukui;
- MT6397 PMIC get proper sub-node names, fixing dt validation;
- The property enabling Wake-On-Lan feature changed in all of
the boards and driver to match the actual meaning of it
(mediatek,mac-wol now enables wol on mac instead of phy);
- Compatibles for MediaTek PMIC Keypad are added to bindings
and can now pass dts validation;
...and the newly added machines are:
- MT8188 (Ciri) Lenovo Chromebook Duet
- MT8186 (Starmie) ASUS Chromebook Enterprise CM30
- MT8186 (Chinchou) ASUS Chromebook CZ12 and CZ12 Flip
* tag 'mtk-dts64-for-v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (71 commits)
arm64: dts: mediatek: mt8516: add keypad node
arm64: dts: mediatek: add per-SoC compatibles for keypad nodes
dt-bindings: mediatek,mt6779-keypad: add more compatibles
arm64: dts: mediatek: mt8365-evk: Set ethernet alias
dts: arm64: mediatek: mt8195: Remove MT8183 compatible for OVL
dts: arm64: mediatek: mt8188: Update OVL compatible from MT8183 to MT8195
dt-bindings: display: mediatek: ovl: Modify rules for MT8195/MT8188
dt-bindings: display: mediatek: ovl: Add compatible strings for MT8188 MDP3
dt-bindings: arm: mediatek: Drop MT8192 Chromebook variants that never shipped
arm64: dts: mediatek: mt8192: Drop Chromebook variants that never shipped
arm64: dts: mediatek: mt7988a-bpi-r4: Add proc-supply for cpus
arm64: dts: mediatek: mt7988a-bpi-r4: Add MediaTek MT6682A/RT5190A PMIC
arm64: dts: mediatek: mt7988a-bpi-r4: Enable pcie
arm64: dts: mediatek: mt7988a-bpi-r4: Enable pwm
arm64: dts: mediatek: mt7988a-bpi-r4: Enable ssusb1 on bpi-r4
arm64: dts: mediatek: mt7988a-bpi-r4: Enable t-phy for ssusb1
arm64: dts: mediatek: mt7988a-bpi-r4: Add PCA9545 I2C Mux
arm64: dts: mediatek: mt7988a-bpi-r4: Enable I2C controllers
arm64: dts: mediatek: mt7988a-bpi-r4: Add default UART stdout
arm64: dts: mediatek: mt7988a-bpi-r4: Enable serial0 debug uart
...
Link: https://lore.kernel.org/r/20250108100826.32458-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX arm64 device tree change for 6.14:
- Add simple-framebuffer support for imx8mn-bsh-smm-s2/pro board
(Dario Binacchi)
- Add LVDS compatible string for imx8mm-phg board (Fabio Estevam)
- Add P3T1085 temperature sensor support for imx93-9x9-qsb board (Frank Li)
- Add support for i.MX8MP based aristainetos3 boards from ABB
(Heiko Schocher)
- Add PCA9452 system PMIC support for imx93-14x14-evk board (Joy Zou)
- Support NXP LVDS to HDMI adapter cards for imx8mp-evk board with DT
overlays (Liu Ying)
- A couple of changes from Markus Niebel to enable Open Drain for MDIO
on imx93-tqma9352 boards
- A series from Peng Fan to enable wdog3 fsl,ext-reset-output support
for NXP i.MX93 boards
- A couple changes from Wei Fang to add NETC support for i.MX95
* tag 'imx-dt64-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: freescale: imx93-9x9-qsb: enable fsl,ext-reset-output for wdog3
arm64: dts: freescale: imx93-14x14-evk: enable fsl,ext-reset-output for wdog3
arm64: dts: freescale: imx93-11x11-evk: enable fsl,ext-reset-output for wdog3
arm64: dts: imx95-19x19-evk: add ENETC 0 support
arm64: dts: imx95: add NETC related nodes
arm64: dts: imx8mm-phg: Add LVDS compatible string
arm64: dts: imx93: add pca9452 support
arm64: dts: imx8mn-bsh-smm-s2/pro: add simple-framebuffer
arm64: dts: imx93-tqma9352-mba93xxla: enable Open Drain for MDIO
arm64: dts: imx93-tqma9352-mba93xxca: enable Open Drain for MDIO
arm64: dts: imx93-9x9-qsb: add temp-sensor nxp,p3t1085
arm64: dts: imx8mp-evk: Add NXP LVDS to HDMI adapter cards
arm64: dts: imx8mp-skov-revb-mi1010ait-1cp1: Set "media_disp2_pix" clock rate to 70MHz
arm64: dts: imx8mp: add aristainetos3 board support
arm64: dts: imx8mq-zii-ultra: remove #address-cells of eeprom@a4
arm64: dts: imx: Switch to simple-audio-card,hp-det-gpios
Link: https://lore.kernel.org/r/20250105095139.714590-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
SoCFPGA DTS updates for v6.14
- Remove unused and undocumented property "snps,max-mtu"
- Add gpio and spi node for Agilex5
- Add VGIC maintenance interrupt for Agilex
- Use correct reset name of "stmmaceth-ocp" instead of "ahb"
- Drop unused #address-cells/#size-cells in the cyclone5-mcvevk
* tag 'socfpga_dts_updates_v6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: altera: Remove unused and undocumented "snps,max-mtu" property
arm64: dts: socfpga: agilex5: Add gpio0 node and spi dma handshake id
arm64: dts: socfpga: agilex: Add VGIC maintenance interrupt
arm: dts: socfpga: use reset-name "stmmaceth-ocp" instead of "ahb"
ARM: dts: socfpga_cyclone5_mcvevk: Drop unused #address-cells/#size-cells
Link: https://lore.kernel.org/r/20250103023012.1268627-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Minor improvements in ARM DTS for v6.14
1. Marvell: Use un-deprecated hp-det-gpios (no ABI impact expected).
2. SoCFPGA: Drop spidev devices which are not properly described in DTS,
but are using some other compatibles. This was part of wider tree
effort to fix such incorrect hardware descriptions.
Important: Dropping this device node will have user-visible impact:
spidev device will not register.
* tag 'dt-cleanup-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
ARM: dts: socfpga: remove non-existent DAC from CycloneV devkit
ARM: dts: marvell: mmp2-olpc-xo-1-75: Switch to {hp,mic}-det-gpios
Link: https://lore.kernel.org/r/20241231132847.135814-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Minor improvements in ARM64 DTS for v6.14
1. Spreadtrum:
- Correct few issues pointed out by DT schema around properties and
node names.
- Move fuel-gauge from DTSI to DTS, because it belongs to the board.
- Use undeprecated properties, like battery-detect-gpios, already
supported by Linux.
2. Uniphier: Use un-deprecated hp-det-gpios (no ABI impact expected).
* tag 'dt64-cleanup-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
arm64: dts: sprd: Fix battery-detect-gpios property
arm64: dts: uniphier: Switch to hp-det-gpios
arm64: dts: sprd: sc9863a: reorder clocks, clock-names per bindings
arm64: dts: sprd: sc9863a: fix in-ports property
arm64: dts: sprd: sc2731: move fuel-gauge monitored-battery to device DTS
arm64: dts: sprd: sp9860g-1h10: fix factory-internal-resistance-micro-ohms property
arm64: dts: sprd: sp9860g-1h10: fix constant-charge-voltage-max-microvolt property
Link: https://lore.kernel.org/r/20241231132847.135814-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM64 changes for v6.14
1. Exynos8895: Add UART nodes, PMU (performance) for the M2 cluster and
I2C controllers in the camera block (HSI2C in CAM0-3).
2. Exynos990: Add Power Management Unit (Samsung block), PMU
(performance) for M5 cluster and two clock controllers.
3. ExynosAutov920: Add watchdog and DMA controllers.
4. Google GS101: Minor fixes for phy and USB. Add USB Type-C.
5. Exynos850-e850-96 board: Drop gap in memory layout.
6. New SoC: Exynos9810.
7. New boards, all mobile phones:
- Exynos9810:
Samsung Galaxy S9 (SM-G960F)
- Exynos990:
Samsung Galaxy S20 FE (SM-G780F)
Samsung Galaxy S20 5G (SM-G980F)
* tag 'samsung-dt64-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (23 commits)
arm64: dts: exynos8895: Add camera hsi2c nodes
arm64: dts: exynos990: Add clock management unit nodes
arm64: dts: exynos: gs101-oriole: add pd-disable and typec-power-opmode
arm64: dts: exynos: gs101-oriole: enable Maxim max77759 TCPCi
arm64: dts: exynos: Add initial support for Samsung Galaxy S9 (SM-G960F)
arm64: dts: exynos: Add Exynos9810 SoC support
arm64: dts: exynos850-e850-96: Specify reserved secure memory explicitly
arm64: dts: exynos990: Add a PMU node for the third cluster
arm64: dts: exynosautov920: Add DMA nodes
arm64: dts: exynos8895: Add a PMU node for the second cluster
dt-bindings: clock: samsung: Add Exynos990 SoC CMU bindings
arm64: dts: exynosautov920: add watchdog DT node
arm64: dts: exynos: Add initial support for Samsung Galaxy S20 (x1slte)
arm64: dts: exynos: Add initial support for Samsung Galaxy S20 5G (x1s)
arm64: dts: exynos: Add initial support for Samsung Galaxy S20 Series boards (x1s-common)
dt-bindings: arm: samsung: samsung-boards: Add bindings for SM-G981B and SM-G980F board
arm64: dts: exynos: gs101: allow stable USB phy Vbus detection
arm64: dts: exynos: gs101: phy region for exynos5-usbdrd is larger
MAINTAINERS: add myself and Tudor as reviewers for Google Tensor SoC
arm64: dts: exynos990: Add pmu and syscon-reboot nodes
...
Link: https://lore.kernel.org/r/20241231131742.134329-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
thead-dt-for-v6.14: T-HEAD Devicetrees for v6.14
Add mailbox node for the T-Head TH1520 RISC-V SoC. The mailbox bindings
and driver were already merged in v6.13:
b2cf36e4a2 ("dt-bindings: mailbox: Add thead,th1520-mailbox bindings")
5d4d263e1c ("mailbox: Introduce support for T-head TH1520 Mailbox driver")
Signed-off-by: Drew Fustini <drew@pdp7.com>
* tag 'thead-dt-for-v6.14' of https://github.com/pdp7/linux:
riscv: dts: thead: Add mailbox node
For interrupt-map entries, the DTS specification requires
that #address-cells is defined for both the child node and the
interrupt parent. For the PCIe interrupt-map entries, the parent
node ("gic") has not specified #address-cells. The existing layout
of the PCIe interrupt-map entries indicates that it assumes
that #address-cells is zero for this node.
Explicitly set #address-cells to zero for "gic" so that it complies
with the device tree specification.
NVIDIA EDK2 works around this issue by assuming #address-cells
is zero in this scenario, but that workaround is being removed and so
this update is needed or else NVIDIA EDK2 cannot successfully parse the
device tree and the board cannot boot.
Fixes: ec142c44b0 ("arm64: tegra: Add P2U and PCIe controller nodes to Tegra234 DT")
Signed-off-by: Brad Griffis <bgriffis@nvidia.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241213235602.452303-1-bgriffis@nvidia.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
The RK3588 Single Board Computer includes
- eMMC
- microSD
- UART
- 2 PWM LEDs
- RTC
- RTL8125 network controller on PCIe 2.0x1.
- M.2 M-key connector routed to PCIe 3.0x4
- PWM controlled heat sink fan.
- 2 USB2 ports
- lower USB3 port
- upper USB3 port with OTG capability
- Mali GPU
- SPI NOR flash
- Mask Rom button
- Analog audio using es8388 codec via the headset jack and onboard mic
- HDMI0
- HDMI1
the vcc5v0_usb30 regulator shares the same enable gpio pin as the
vcc5v0_usb20 regulator.
The Orange Pi 5 Max and Orange Pi 5 Ultra are both credit-card sized
boards with similar layout, so these boards will share a common dtsi.
The 5 Max has an extra HDMI0 while the 5 Ultra has a HDMI IN instead.
Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Link: https://lore.kernel.org/r/20250109051619.1825-4-honyuenkwun@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
During mass manufacturing, we noticed the mmc_rx_crc_error counter,
as reported by "ethtool -S eth0 | grep mmc_rx_crc_error", to increase
above zero during nuttcp speedtests. Most of the time, this did not
affect the achieved speed, but it prompted this investigation.
Cycling through the rx_delay range on six boards (see table below) of
various ages shows that there is a large good region from 0x12 to 0x35
where we see zero crc errors on all tested boards.
The old rx_delay value (0x10) seems to have always been on the edge for
the KSZ9031RNX that is usually placed on Puma.
Choose "rx_delay = 0x23" to put us smack in the middle of the good
region. This works fine as well with the KSZ9131RNX PHY that was used
for a small number of boards during the COVID chip shortages.
Board S/N PHY rx_delay good region
--------- --- --------------------
Puma TT0069903 KSZ9031RNX 0x11 0x35
Puma TT0157733 KSZ9031RNX 0x11 0x35
Puma TT0681551 KSZ9031RNX 0x12 0x37
Puma TT0681156 KSZ9031RNX 0x10 0x38
Puma 17496030079 KSZ9031RNX 0x10 0x37 (Puma v1.2 from 2017)
Puma TT0681720 KSZ9131RNX 0x02 0x39 (alternative PHY used in very few boards)
Intersection of good regions = 0x12 0x35
Middle of good region = 0x23
Fixes: 2c66fc34e9 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM")
Cc: stable@vger.kernel.org
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de> # Puma v2.1 and v2.3 with KSZ9031
Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@cherry.de>
Link: https://lore.kernel.org/r/20241213-puma_rx_delay-v4-1-8e8e11cc6ed7@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Access to safety cluster engine (SCE) fabric registers was blocked
by firewall after the introduction of Functional Safety Island in
Tegra234. After that, any access by software to SCE registers is
correctly resulting in the internal bus error. However, when CPUs
try accessing the SCE-fabric registers to print error info,
another firewall error occurs as the fabric registers are also
firewall protected. This results in a second error to be printed.
Disable the SCE fabric node to avoid printing the misleading error.
The first error info will be printed by the interrupt from the
fabric causing the actual access.
Cc: stable@vger.kernel.org
Fixes: 302e154000 ("arm64: tegra: Add node for CBB 2.0 on Tegra234")
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Ivy Huang <yijuh@nvidia.com>
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20241218000737.1789569-3-yijuh@nvidia.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
The compatible string for the Tegra DCE fabric is currently defined as
'nvidia,tegra234-sce-fabric' but this is incorrect because this is the
compatible string for SCE fabric. Update the compatible for the DCE
fabric to correct the compatible string.
This compatible needs to be correct in order for the interconnect
to catch things such as improper data accesses.
Cc: stable@vger.kernel.org
Fixes: 302e154000 ("arm64: tegra: Add node for CBB 2.0 on Tegra234")
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Ivy Huang <yijuh@nvidia.com>
Reviewed-by: Brad Griffis <bgriffis@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20241218000737.1789569-2-yijuh@nvidia.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
