Splitting function header to multiple lines because of 80 characters per
line limit, results in ending the function call line with '('.
This leads to CHECK reported by checkpatch.pl
Move the first parameter right after the '(' in the function call line.
Align the rest of the parameters to the opening parenthesis.
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
Link: https://lore.kernel.org/r/ZBhNOkQbG4ygNF98@khadija-virtual-machine
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The coding style used to limit lines to 80 characters,
which led to splitting of these function headers into multiple
lines and ends the first line with a '('.
Such splits causes checks reported by the checkpatch.
Place the function parameters of each function immediately after
'(' in a single line to align the function headers.
Signed-off-by: Sumitra Sharma <sumitraartsy@gmail.com>
Link: https://lore.kernel.org/r/20230319164520.GA125117@sumitra.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the coding style limited the code to 80 columns per line which caused
splitting the function header into two lines resulted in the first line
ending with a '('. This caused the checkpatch error.
Place the function parameters immediately after '(' in a single
line to align the function header.
Signed-off-by: Sumitra Sharma <sumitraartsy@gmail.com>
Link: https://lore.kernel.org/r/20230317052455.GA83442@sumitra.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Initialize the module parameters, read_timeout and write_timeout once in
init().
Module parameters can only be set once and cannot be modified later, so we
don't need to evaluate them again when passing the parameters to
wait_event_interruptible_timeout().
Convert datatype of {read,write}_timeout from 'int' to 'long int' because
implicit conversion of 'long int' to 'int' in statement
'{read,write}_timeout = MAX_SCHEDULE_TIMEOUT' results in an overflow.
Change format specifier for {read,write}_timeout from %i to %li.
Reviewed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
Link: https://lore.kernel.org/r/ZBN3XAsItCiTk7CV@khadija-virtual-machine
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove function rtl92e_is_legal_rf_path that will always return 1. Reason
is that the eRFPath is always 0 for RF90_PATH_A or 1 for RF90_PATH_B but
never 2 or 3. In most usage cases this is easy to see but for the
following functions that use rtl92e_is_legal_rf_path it is more
difficult:
rtl92e_set_rf_reg and rtl92e_get_rf_reg are used in:
rtl92e_set_bandwidth (eRFPath only for 0 and 1)
rtl92e_config_rf (eRFPath only for 0 and 1)
_rtl92e_phy_switch_channel_step (eRFPath only for 0 and 1)
_rtl92e_dm_check_tx_power_tracking_thermal (eRFPath only for 0)
rtl92e_check_bb_and_rf is used in:
rtl92e_config_rf (eRFPath only for 0 and 1)
_rtl92e_bb_config_para_file (eRFPath only for 0)
rtl92e_config_rf_path is used in:
rtl92e_config_rf (eRFPath only for 0 and 1)
Remove dead code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/b801f1f9ff3c58aedab4e3e07b2ec0a816fdf5d9.1678740713.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unused priv->phy_reg_def[RF90_PATH_C].rfHSSIPara2 and
priv->phy_reg_def[RF90_PATH_D].rfHSSIPara2.
rfHSSIPara2 is used in rtl92e_set_bb_reg which is used in:
rtl92e_config_rf (eRFPath only for 0 and 1)
_rtl92e_phy_rf_read which is used in:
rtl92e_set_rf_reg and rtl92e_get_rf_reg are used in:
rtl92e_set_bandwidth (eRFPath only for 0 and 1)
rtl92e_config_rf (eRFPath only for 0 and 1)
_rtl92e_phy_switch_channel_step (eRFPath only for 0 and 1)
_rtl92e_dm_check_tx_power_tracking_thermal (eRFPath only for 0)
rtl92e_check_bb_and_rf is used in:
rtl92e_config_rf (eRFPath only for 0 and 1)
_rtl92e_bb_config_para_file (eRFPath only for 0)
rtl92e_config_rf_path is used in:
rtl92e_config_rf (eRFPath only for 0 and 1)
Remove dead code and constants.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/186f3e59e736de6fd2111e835cdb4b633ca41bbc.1678569965.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unused priv->phy_reg_def[RF90_PATH_C].rfLSSIReadBack and
priv->phy_reg_def[RF90_PATH_D].rfLSSIReadBack.
rfLSSIReadBack is used in:
_rtl92e_phy_rf_read which is used in:
rtl92e_set_rf_reg and rtl92e_get_rf_reg are used in:
rtl92e_set_bandwidth (eRFPath only for 0 and 1)
rtl92e_config_rf (eRFPath only for 0 and 1)
_rtl92e_phy_switch_channel_step (eRFPath only for 0 and 1)
_rtl92e_dm_check_tx_power_tracking_thermal (eRFPath only for 0)
rtl92e_check_bb_and_rf is used in:
rtl92e_config_rf (eRFPath only for 0 and 1)
_rtl92e_bb_config_para_file (eRFPath only for 0)
rtl92e_config_rf_path is used in:
rtl92e_config_rf (eRFPath only for 0 and 1)
Remove dead code and constants.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/622777b394a896b6db08eb7faeb455e5cbeae93f.1678569965.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unused priv->phy_reg_def[RF90_PATH_C].rf3wireOffset and
priv->phy_reg_def[RF90_PATH_D].rf3wireOffset.
rf3wireOffset is used in _rtl92e_phy_rf_read and _rtl92e_phy_rf_write
which are used in:
rtl92e_set_rf_reg and rtl92e_get_rf_reg are used in:
rtl92e_set_bandwidth (eRFPath only for 0 and 1)
rtl92e_config_rf (eRFPath only for 0 and 1)
_rtl92e_phy_switch_channel_step (eRFPath only for 0 and 1)
_rtl92e_dm_check_tx_power_tracking_thermal (eRFPath only for 0)
rtl92e_check_bb_and_rf is used in:
rtl92e_config_rf (eRFPath only for 0 and 1)
_rtl92e_bb_config_para_file (eRFPath only for 0)
rtl92e_config_rf_path is used in:
rtl92e_config_rf (eRFPath only for 0 and 1)
Remove dead code and constants.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/180723eee77f70ffda1f8f0656c2f256f005c4ef.1678569965.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unused priv->phy_reg_def[RF90_PATH_C].rfintfo and
priv->phy_reg_def[RF90_PATH_D].rfintfo and
remove unused priv->phy_reg_def[RF90_PATH_C].rfintfe and
priv->phy_reg_def[RF90_PATH_D].rfintfe.
The termination condition for the loop is set to
priv->num_total_rf_path = RTL819X_TOTAL_RF_PATH = 2.
Because of this pPhyReg = &priv->phy_reg_def[eRFPath]; pPhyReg cannot
point to array element 2 for RF90_PATH_C and 3 for RF90_PATH_D.
Remove unused constants as well.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/3c2237e2b4094129143594a5ab45691e9961e100.1678569965.git.philipp.g.hortmann@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need the removal of the r8188eu staging driver in here as well so
that outreachy and LF mentor applicants do not try to submit patches
against it as it is now gone from the tree.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
