Replace permanently bouncing email addresses (550 5.1.1 Recipient address
rejected) of Adam Skladowski, Chanho Park, Anusha Rao and Sireesh
Kodali. There are no new messages from them via other email addresses,
so drop them permanently. Add Alim Akhtar to Samsung ExynosAutov9 SoC
clocks, because he looks at other Samsung clock hardware and drivers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260623073050.36262-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Pull RTC updates from Alexandre Belloni:
"Most of the work and improvements are for features of the m41t93.
The ds1307 also gets support for OSF (Oscillator Stop Flag) for
new variants.
The pcap driver is being removed as the Motorola EZX support was
removed a while ago.
Subsystem:
- add rtc_read_next_alarm() to read next expiring timer
Drivers:
- ds1307: handle OSF for ds1337/ds1339/ds3231, add clock provider for
ds1307, fix wday for rx8130
- m41t93: DT support, alarm, clock provider, watchdog support
- mv: add suspend/resume support for wakeup
- pcap: remove driver
- renesas-rtca3: many fixes"
* tag 'rtc-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (36 commits)
rtc: ds1307: update reference to removed CONFIG_RTC_DRV_DS1307_HWMON
platform/x86: amd-pmc: Fix S0i3 wakeup with alarmtimer
rtc: s35390a: fix typo in comment
rtc: cmos: unregister HPET IRQ handler on probe failure
rtc: ds1307: Fix off-by-one issue with wday for rx8130
dt-bindings: rtc: ds1307: Add epson,rx8901
rtc: bq32000: add delay between RTC reads
rtc: m41t93: Add watchdog support
rtc: m41t93: Add square wave clock provider support
rtc: m41t93: Add alarm support
rtc: m41t93: migrate to regmap api for register access
rtc: m41t93: add device tree support
dt-bindings: rtc: Add ST m41t93
rtc: ds1307: add support for clock provider in ds1307
rtc: mv: add suspend/resume support for wakeup
rtc: aspeed: add AST2700 compatible
dt-bindings: rtc: add ASPEED AST2700 compatible
rtc: interface: fix typos in rtc_handle_legacy_irq() documentation
rtc: msc313: fix NULL deref in shared IRQ handler at probe
rtc: remove unused pcap driver
...
Pull spi fixes from Mark Brown:
"A fairly unremarkable collection of fixes that came in over the
merge window, plus a new device ID for the DesignWare controller
in the StarFive JHB100 SoC.
There's a couple of core fixes included, one avoiding freeing an
empty resource in error handling cases and another which fixes a
NULL dereference which could be triggered by using an abnormal
device registration flow like driver_override"
* tag 'spi-fix-v7.2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: imx: reconfigure for PIO when DMA cannot be started
spi: dw: Add support for snps,dwc-ssi-2.00a
spi: dt-bindings: snps,dw-apb-ssi: Add starfive,jhb100-spi
spi: rpc-if: Use correct device for hardware reinitialization on resume
spi: acpi: Free resource list at appropriate time
spi: dw: fix wrong BAUDR setting after resume
spi: uniphier: Fix completion initialization order before devm_request_irq()
spi: Add NULL check for spi_get_device_id() in spi_get_device_match_data()
Pull devicetree fixes from Rob Herring:
- Drop unnecessary type reference from khadas,mcu "fan-supply"
- Fix clocks in Renesas R-Mobile APE6 example
- Add missing Unisoc SC2730 PMIC regulators schema
- Fix Amlogic thermal example
- kernel-doc fix for of_map_id()
- Handle negative index in of_fwnode_get_reference_args()
* tag 'devicetree-fixes-for-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: mfd: khadas,mcu: Drop type reference from "fan-supply"
dt-bindings: clock: renesas: div6: Use ZT/ZTR trace clock in R-Mobile APE6 example
regulator: dt-bindings: Add Unisoc SC2730 PMIC
dt-bindings: thermal: amlogic: Correct 'reg' in the example
dt-bindings: thermal: amlogic: Fix missing header in the example
of: Fix RST inline emphasis warnings in of_map_id() kernel-doc
of: property: Fix of_fwnode_get_reference_args() with negative index
Pull LoongArch updates from Huacai Chen:
- Add THREAD_INFO_IN_TASK implementation
- Add build salt to the vDSO
- Add some BPF JIT inline helpers
- Update DTS for I2C clocks and clock-frequency
- Some bug fixes and other small changes
* tag 'loongarch-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
selftests/bpf: Test jited inline of bpf_get_smp_processor_id() for LoongArch
selftests/bpf: Test jited inline of bpf_get_current_task() for LoongArch
selftests/bpf: Add __arch_loongarch to limit test cases for LoongArch
selftests/bpf: Add get_preempt_count() support for LoongArch
LoongArch: dts: Add i2c clocks and clock-frequency properties to LS2K2000
LoongArch: dts: Add i2c clocks and clock-frequency properties to LS2K1000
LoongArch: dts: Add i2c clocks and clock-frequency properties to LS2K0500
LoongArch: BPF: Inline bpf_get_smp_processor_id() helper
LoongArch: BPF: Inline bpf_get_current_task/_btf() helpers
LoongArch: BPF: Fix off-by-one error in tail call
LoongArch: BPF: Fix outdated tail call comments
LoongArch: Add build salt to the vDSO
LoongArch: Fix nr passing in set_direct_map_valid_noflush()
LoongArch: Fix missing dirty page tracking in {pte,pmd}_wrprotect()
LoongArch: Move struct kimage forward declaration before use
LoongArch: Report dying CPU to RCU in stop_this_cpu()
LoongArch: Add PIO for early access before ACPI PCI root register
LoongArch: Add THREAD_INFO_IN_TASK implementation
Pull clk updates from Stephen Boyd:
"This is all clk driver updates. Mostly new SoC support for various
Qualcomm chips and Canaan K230. Otherwise there's non-critical fixes
and updates to clk data such as adding missing clks to existing
drivers or marking clks critical. Nothing looks especially exciting"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (106 commits)
clk: qcom: regmap-phy-mux: Rework the implementation
clk: qcom: a53: Corrected frequency multiplier for 1152MHz
clk: qcom: camcc-milos: Declare icc path dependency for CAMSS_TOP_GDSC
clk: qcom: gdsc: Support enabling interconnect path for power domain
dt-bindings: clock: qcom,milos-camcc: Document interconnect path
interconnect: Add devm_of_icc_get_by_index() as exported API for users
clk: qcom: camcc-x1p42100: Add support for camera clock controller
clk: qcom: camcc-x1e80100: Add support for camera QDSS debug clocks
clk: qcom: videocc-x1p42100: Add support for video clock controller
dt-bindings: clock: qcom: Add X1P42100 camera clock controller
dt-bindings: clock: qcom: Add X1P42100 video clock controller
clk: keystone: sci-clk: fix application of sizeof to pointer
clk: keystone: don't cache clock rate
clk: spacemit: k3: Add PCIe DBI clock
dt-bindings: soc: spacemit: k3: Add PCIe DBI clock IDs
clk: spacemit: k3: Fix PCIe clock register offset
clk: spacemit: k3: Switch to pll2_d6 as parent for PCIe clock
clk: at91: keep securam node alive while mapping it
clk: samsung: exynos990: Fix PERIC0/1 USI clock types
clk: renesas: r9a08g045: Drop unused pm_domain header file
...
Pull SPMI updates from Stephen Boyd:
"Support for Qualcomm PMIC arbiter v8.5 and Hawi along with a
kernel doc cleanup and a kzalloc flex usage"
* tag 'spmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sboyd/spmi:
spmi: use kzalloc_flex in main allocation
spmi: clean up kernel-doc in spmi.h
spmi: spmi-pmic-arb: add support for PMIC arbiter v8.5
dt-bindings: spmi: glymur-spmi-pmic-arb: Add compatible for Qualcomm Hawi SoC
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and IPsec.
Current release - regressions:
- do not acquire dev->tx_global_lock in netdev_watchdog_up()
- ethtool: keep rtnl_lock for ops using ethtool_op_get_link()
- fix deadlock in nested UP notifier events
Current release - new code bugs:
- eth:
- cn20k: fix subbank free list indexing for search order
- airoha: fix BQL underflow in shared QDMA TX ring
Previous releases - regressions:
- netfilter:
- flowtable: fix offloaded ct timeout never being extended
- nf_conncount: prevent connlimit drops for early confirmed ct
Previous releases - always broken:
- require CAP_NET_ADMIN in the originating netns when modifying
cross-netns devices
- report NAPI thread PID in the caller's pid namespace
- mac802154: fix dirty frag in in-place crypto for IOT radios
- sctp: hold socket lock when dumping endpoints in sctp_diag, avoid
an overflow
- eth: gve: fix header buffer corruption with header-split and HW-GRO
- af_key: initialize alg_key_len for IPComp states, prevent OOB read"
* tag 'net-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (213 commits)
selftests: bonding: add a test for VLAN propagation over a bonded real device
vlan: defer real device state propagation to netdev_work
net: add the driver-facing netdev_work scheduling API
net: turn the rx_mode work into a generic netdev_work facility
net: ethtool: keep rtnl_lock for ops using ethtool_op_get_link()
rxrpc: Fix rxrpc_rotate_tx_rotate() to check there's something to rotate
rxrpc: Fix leak of released call in recvmsg(MSG_PEEK)
rxrpc: Fix socket notification race
rxrpc: Fix potential infinite loop in rxrpc_recvmsg()
rxrpc: Fix oob challenge leak in cleanup after notification failure
rxrpc: Fix the reception of a reply packet before data transmission
afs: Fix uncancelled rxrpc OOB message handler
afs: Fix further netns teardown to cancel the preallocation charger
rxrpc: Fix double unlock in rxrpc_recvmsg()
rxrpc: Fix leak of connection from OOB challenge
rxrpc: Fix ACKALL packet handling
net: hns3: differentiate autoneg default values between copper and fiber
net: hns3: fix permanent link down deadlock after reset
net: hns3: refactor MAC autoneg and speed configuration
net: hns3: unify copper port ksettings configuration path
...
Pull kvm fixes from Paolo Bonzini:
"s390:
- Fix S390_USER_OPEREXEC so it can now be enabled regardless of other
unrelated capabilities
- Fix handling of the _PAGE_UNUSED pte bit that could lead to guest
memory corruption in some scenarios
- A bunch of misc gmap fixes (locking, behaviour under memory
pressure)
- Fix CMMA dirty tracking
x86:
- Tidy up some WARN_ON() and BUG_ON(), replacing them with
WARN_ON_ONCE() or KVM_BUG_ON(). All of these have obviously never
triggered, or somebody would have been annoyed earlier, but still...
- Fix missing interrupt due to stale CR8 intercept
- Add a statistic that can come in handy to debug leaks as well as
the vulnerability to a class of recently-discovered issues
- Do not ask arch/x86/kernel to export
default_cpu_present_to_apicid() just for KVM"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
x86/apic: KVM: Use cpu_physical_id() to get APIC ID of running vCPU for AVIC
KVM: x86/mmu: Expose number of shadow MMU shadow pages as a stat
KVM: x86: Unconditionally recompute CR8 intercept on PPR update
KVM: VMX: Grab vmcs12 on CR8 interception update iff vCPU is in guest mode
KVM: x86: WARN (once) if RTC pending EOI tracking goes off the rails
KVM: x86: WARN and fail kvm_set_irq() if a PIC or I/O APIC vector is invalid
KVM: x86: Bug the VM, not the kernel, if the ISR count {under,over}flows
KVM: x86/mmu: Bug the VM, not the host kernel, if KVM write-protects upper SPTEs
KVM: x86: Replace BUG_ON() with WARN_ON_ONCE() on "bad" nested GPA translation
KVM: Replace guest-triggerable BUG_ON() in ioeventfd datamatch with get_unaligned()
KVM: s390: Return failure in case of failure in kvm_s390_set_cmma_bits()
KVM: s390: selftests: Fix cmma selftest
KVM: s390: Fix cmma dirty tracking
KVM: s390: Fix locking in kvm_s390_set_mem_control()
KVM: s390: Fix handle_{sske,pfmf} under memory pressure
KVM: s390: Fix code typo in gmap_protect_asce_top_level()
KVM: s390: Do not set special large pages dirty
KVM: s390: Fix dat_peek_cmma() overflow
s390/mm: Fix handling of _PAGE_UNUSED pte bit
KVM: s390: Fix typo in UCONTROL documentation
...
vlan_device_event() generates nested UP/DOWN, MTU and feature
change events. It executes an event for the VLAN device directly
from the notifier - while the locks of the lower device are held.
This causes deadlocks, for example:
bond (3) bond_update_speed_duplex(vlan)
| ^ v
vlan (2) UP(vlan) (4) vlan_ethtool_get_link_ksettings()
| ^ v
dummy (1) UP(dummy) (5) __ethtool_get_link_ksettings()
The dummy device is ops locked, vlan creates a nested event (2),
then bond wants to ask vlan for link state (3). bond uses the
"I'm already holding the instance lock" flavor of API. But in
this case the lock held refers to vlan itself. We hit vlan's
link settings trampoline (4) and call __ethtool_get_link_ksettings()
which tries to lock dummy. Deadlock. There's no clean way for us
to tell the vlan_ethtool_get_link_ksettings() that the caller
is already in lower device's critical section.
Defer the propagation to the per-netdev work facility instead:
the notifier only schedules netdev_work_sched(vlandev, VLAN_WORK_*),
and ndo_work (vlan_dev_work) applies the change later. Hopefully
nobody expects the VLAN state changes to be instantaneous.
If someone does expect the changes to be instantaneous we will
have to do the same thing Stan did for rx_mode and "strategically"
place sync calls, to make sure such delayed works are executed
after we drop the ops lock but before we drop rtnl_lock.
Stan suggests that if we need that down the line we may
consider reshaping the mechanism into "async notifications".
AFAICT only vlan does this sort of netdev open chaining,
so as a first try I think that sticking the complexity into
the vlan code makes sense.
One corner case is that we need to cancel the event if user
explicitly changes the state before work could run. Consider
the following operations with vlan0 on top of dummy0:
ip link set dev dummy0 up # queues work to up vlan0
ip link set dev vlan0 down # user explicitly downs the vlan
ndo_work # acts on the stale event
Reported-by: syzbot+09da62a8b78959ceb8bb@syzkaller.appspotmail.com
Reported-by: syzbot+cb67c392b0b8f0fd0fc1@syzkaller.appspotmail.com
Reported-by: syzbot+9bb8bd77f3966641f298@syzkaller.appspotmail.com
Fixes: 9f275c2e90 ("net: ethtool: make sure __ethtool_get_link_ksettings() is ops-locked")
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260624182018.2445732-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull more documentation updates from Jonathan Corbet:
"A handful of late-arriving docs fixes, along with one document update
that fell through the cracks before"
* tag 'docs-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux:
docs: tools: Fix typo 'ackward' to 'awkward' in unittest.rst
kdoc: xforms: ignore special static/inline macros
kdoc: xforms_lists: handle DECLARE_PER_CPU() in kernel-doc
MAINTAINERS: Fix regex for kdoc
docs: kgdb: Fix path of driver options
Documentation: tracing: fix typo in events documentation
Docs/driver-api/uio-howto: document mmap_prepare callback
docs/mm: clarify that we are not looking for LLM generated content
kernel-doc: xforms: support __SYSFS_FUNCTION_ALTERNATIVE()
Pull more Kbuild updates from Nathan Chancellor:
- Link host programs with ld.lld when $(LLVM) is set to match user's
expectations that LLVM will be used exclusively during the build
process
- Fix modpost warnings from static variable name promotion that can
happen more aggressively with the recently merged distributed ThinLTO
support
- Add an optional warning for user-supplied Kconfig values that changed
after processing, such as out of range values or options that have
incorrect / missing dependencies
* tag 'kbuild-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kconfig: add optional warnings for changed input values
modpost: Ignore Clang LTO suffixes in symbol matching
kbuild: Use ld.lld for linking host programs when LLVM is set
Pull ipmi updates from Corey Minyard:
"Lots of little tweaks.
Nothing huge, the biggest issue was a possible refcount underflow that
could cause a memory leak in some situations. Otherwise, fixing
formatting and style things and some docs typos"
* tag 'for-linus-7.2-1' of https://github.com/cminyard/linux-ipmi:
docs: ipmi: Fix path of the "hotmod" module parameter
ipmi: Drop unused assignment of platform_device_id driver data
ipmi: si: Use platform_get_irq_optional() to retrieve interrupt
ipmi: fix refcount leak in i_ipmi_request()
ipmi:ssif: Drop unused assignment of platform_device_id driver data
ipmi: Fix user refcount underflow in event delivery
ipmi: Use named initializers for struct i2c_device_id
ipmi: Use LIST_HEAD() to initialize on stack list head
ipmi:kcs: Reduce the number of retries
Emails to the maintainer of Qualcomm PPE Ethernet driver (Luo Jie
<quic_luoj@quicinc.com>) bounce permanently (full mailbox), because the
"quicinc.com" addresses were deprecated for public work. All Qualcomm
contributors are aware of that and were asked to fix their addresses.
Driver is not supported - in terms of how netdev understands supported
commitment - if maintainer does not care to receive the patches for its
code, so demote it to "maintained" to reflect true status.
Fix all occurences of Luo Jie email address to preferred and working
domain.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Luo Jie <jie.luo@oss.qualcomm.com>
Link: https://patch.msgid.link/20260623073307.36483-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Like other architectures such as x86, arm64, riscv, powerpc and s390,
select THREAD_INFO_IN_TASK for LoongArch to move thread_info off the
stack into task_struct. This follows modern kernel standards and also
makes the system more secure.
With this patch, thread_info is included in task_struct at an offset
of 0 instead of being placed at the bottom of the kernel stack. Thus,
the $tp register points to both thread_info and task_struct.
To support this, introduce a per-CPU variable cpu_tasks to store the
pointer to the current task_struct. This decouples the recovery of the
$tp register from the stack pointer during exception entry.
Then initialize cpu_tasks for the primary and secondary CPUs during
arch-specific setup and SMP boot paths. To eliminate the dangerous
windows during the early initialization where the cpu_tasks remains
uninitialized, set_current() is invoked as early as possible in both
setup_arch() and start_secondary(). This ensures the $tp recovery
barrier is armed in case any early boot exceptions or kernel panics
occur.
Modify SAVE_SOME and handle_syscall to restore the $tp register from
cpu_tasks, and also use the la_abs absolute addressing for cpu_tasks
access in assembly to bypass the relocation limits within exception
handling sections. By advancing the preservation of u0 in SAVE_SOME,
we reuse the PERCPU_BASE_KS value in u0 for the cpu_tasks calculation,
effectively eliminating a duplicate csrrd instruction execution on SMP
platforms.
Update <asm/switch_to.h> and <kernel/switch.S> to fully support the
CONFIG_THREAD_INFO_IN_TASK feature.
Remove the obsolete next_ti argument from __switch_to(), which shifts
the remaining arguments ahead in the calling convention (sched_ra from
a3 to a2, and sched_cfa from a4 to a3). Under the new configuration,
__switch_to() now directly derives the thread pointer ($tp) from the
next task_struct pointer in a1.
To preserve the optimal and clean "move tp, a1" path for 64-bit kernels,
the thread pointer ($tp) is assigned directly from a1 in the core path.
For 32-bit kernels, where a1 carries a 2000-byte structural pointer bias
at entry, an explicit adjustment "PTR_ADDI tp, tp, -TASK_STRUCT_OFFSET"
is introduced at the function exit.
In the context of __switch_to(), local interrupts are disabled, and the
kernel is in a critical switching phase where handling any synchronous
exception is practically impossible and prohibited.
If any synchronous exception or watchpoint does trigger in this narrow
window, it constitutes a fatal double fault and the kernel is expected
to die/panic immediately anyway. Therefore, the temporary biased value
in $tp is safe and acceptable here.
Additionally, evaluate the stack lookup as a single load instruction
"LONG_LPTR t0, a1, (TASK_STACK - TASK_STRUCT_OFFSET)", this perfectly
satisfies both 32-bit and 64-bit kernels. Using the "next" pointer in
a1 as the base register, rather than $tp, effectively unchains the data
dependency (RAW hazard) from the preceding move instruction, maximizing
the instruction-level parallelism and superscalar execution efficiency
while naturally adapting the structural shift.
With CONFIG_THREAD_INFO_IN_TASK enabled, the kernel stack life cycle is
decoupled from task_struct and can be freed concurrently.
Currently, show_stacktrace() reads raw stack data via __get_addr() and
subsequently calls show_backtrace() to unwind the frame, without holding
any reference to the target task's stack. If show_stacktrace() is called
on a concurrently exiting task, it could attempt to read from a freed or
reallocated kernel stack. This introduces a severe use-after-free (UAF)
read risk or kernel panics.
Wrap the entire stack inspection process inside show_stacktrace() with
a try_get_task_stack() and put_task_stack() pair. This ensures the task
stack remains pinned safely during both the raw stack data dump loop and
the subsequent stack unwinding phase.
Also, ensure that the task pointer is initialized to "current" early if
it is NULL, so that try_get_task_stack() always operates on a valid task
reference.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Remove MPS/MRRS Kconfig settings (CONFIG_PCIE_BUS_*) that worked
around a WiFi device defect; use a quirk or boot-time
"pci=pcie_bus_tune_*" kernel parameter instead (Bjorn Helgaas)
- Always lift 2.5GT/s restriction in PCIe failed link retraining to
avoid clamping a link to 2.5GT/s after hot-plug changes the device
(Maciej W. Rozycki)
- Request bus reassignment when not probe-only to fix an enumeration
regression on Marvell CN106XX and possibly other DT-based systems
(Ratheesh Kannoth)
- Fix procfs race between pci_proc_init() and pci_bus_add_device()
that resulted in 'proc_dir_entry ... already registered' warnings
and pointer corruption (Krzysztof Wilczyński)
- Fix sysfs race that causes 'duplicate filename' warnings and boot
panics by converting PCI resource files to static attributes
(Krzysztof Wilczyński)
- Expose sysfs 'resourceN_resize' attributes only on platforms with
PCI mmap (Krzysztof Wilczyński)
- Require CAP_SYS_ADMIN to write to sysfs 'resourceN_resize'
attributes (Krzysztof Wilczyński)
- Add security_locked_down(LOCKDOWN_PCI_ACCESS) to alpha PCI resource
mmap path to match the generic path (Krzysztof Wilczyński)
- Use kstrtobool() to parse the 'rom' attribute input to avoid the
unexpected behavior of enabling the ROM when writing '0' with no
trailing newline (Krzysztof Wilczyński)
Resource management:
- Improve resource claim logging for debuggability (Ilpo Järvinen)
- Clean up several uses of const parameters (Ilpo Järvinen)
- Check option ROM header signatures and lengths before accessing to
avoid page faults and alignment faults (Guixin Liu)
ASPM:
- Don't reconfigure ASPM when entering low-power D-state; only do it
when returning back to D0 (Carlos Bilbao)
Power management:
- During suspend, set power state to 'unknown' for all devices, not
just those with drivers (Lukas Wunner)
- Skip restoring Resizable BARs and VF Resizable BARs if device
doesn't respond to config reads, to avoid invalid array accesses
(Marco Nenciarini)
- Add pci_suspend_retains_context() so drivers can tell whether
devices retain internal state across suspend/resume, since some
platforms reset devices on suspend; use this in nvme to avoid
issues on Qcom RCs (Manivannan Sadhasivam)
Power control:
- Only to power on/off devices that actually support power control to
avoid poking at incompatible devices mentioned in DT (Manivannan
Sadhasivam)
Virtualization and resets:
- Log device readiness timeouts as errors, not warnings, because the
device is likely unusable in this case (Bjorn Helgaas)
- Wait for device readiness after soft reset (D3hot ->
D0uninitialized transition), when the device may respond with
Request Retry Status (RRS) if it needs more time to initialize
(Bjorn Helgaas)
- Drop unnecessary retries when restoring BARs because resets should
now already include all required delays (Lukas Wunner)
- Avoid FLR for MediaTek MT7925 WiFi, where FLR fails after a VM
terminates uncleanly (Jose Ignacio Tornos Martinez)
- Avoid SBR for Qualcomm WCN6855/WCN7850 WiFi, SDX62/SDX65 modems,
which seem not to support it correctly (Jose Ignacio Tornos
Martinez)
Peer-to-peer DMA:
- Prevent P2PDMA as well as CPU access to non-mappable BARs, e.g.,
s390 ISM BARs (Matt Evans)
- Add Intel QAT, DSA, IAA devices to whitelist (Lukas Wunner)
Endpoint framework:
- Add endpoint controller APIs for use by function drivers to
discover auxiliary blocks like DMA engines (Koichiro Den)
- Remember DesignWare eDMA engine base/size and expose them via the
EPC aux-resource API (Koichiro Den)
- Add endpoint embedded doorbell fallback, used if MSI allocation
fails (Koichiro Den)
- Validate BAR index and remove dead BAR read in endpoint doorbell
test (Carlos Bilbao)
- Unwind MSI/MSI-X vectors if NTB initialization fails part-way
through (Koichiro Den)
- Cache sleepable pci_irq_vector() value at ISR setup to avoid
calling it from hardirq context (Koichiro Den)
- Call sleepable pci_epc_raise_irq() from a work item instead of
atomic context, e.g., when setting bits in NTB peer doorbells in
the ntb_peer_db_set() path (Koichiro Den)
- Report 0-based vNTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Prevent configfs writes to vNTB db_count and other values that are
already in use after EPC attach (Koichiro Den)
- Account for vNTB db_valid reserved slots (link event 0 and
historically skipped slot 1) so they don't appear as valid
doorbells (Koichiro Den)
- Implement vNTB .db_vector_count()/mask() for doorbells so clients
can use multiple vectors and avoid thundering herds (Koichiro Den)
- Report 0-based NTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Fix doorbell bitmask and IRQ vector handling to clear only
specified bits, use the correct vector for non-contiguous Linux IRQ
numbers, and validate incoming vectors (Koichiro Den)
- Implement NTB .db_vector_count()/mask() for doorbells so clients
can use multiple vectors (Koichiro Den)
Native PCIe controller infrastructure:
- Add pci_host_common_link_train_delay() for the mandatory delay
after > 5GT/s Link training completes and use it for cadence HPA,
j721e, LGA; dwc; aardvark, mediatek-gen3, rzg3s (Hans Zhang)
- Protect root bus removal with rescan lock in altera, brcmstb,
cadence, dwc, iproc, mediatek, plda, rockchip to prevent
use-after-free or crashes when racing with sysfs rescan or hotplug
(Hans Zhang)
- Add pci_host_common_parse_ports() for use by any native driver to
parse Root Port properties (per-Link features like width, speed,
PHY, power and reset control, etc should be described in Root Port
stanzas, not the host bridge; currently only reset GPIOs
implemented) (Sherry Sun)
New native PCIe controller drivers:
- Add DT binding and driver for UltraRISC DP1000 PCIe controller
(Xincheng Zhang, Jia Wang)
Altera PCIe controller driver:
- Do not dispose of the parent IRQ mapping, which belongs to the
parent interrupt controller (Mahesh Vaidya)
- Fix chained IRQ handler ordering issue and resource leaks on probe
failure (Mahesh Vaidya)
AMD MDB PCIe controller driver:
- Assert PERST# on shutdown so any connected Endpoints are held in
reset during shutdown (Sai Krishna Musham)
Amlogic Meson PCIe controller driver:
- Propagate devm_add_action_or_reset() failure to fix probe error
path (Shuvam Pandey)
- Add .remove() callback to deinitialize the host bridge and power
off the PHY (Shuvam Pandey)
Broadcom iProc PCIe controller driver:
- Restore .map_irq() assignment; its removal broke INTx on the iproc
platform bus driver (Mark Tomlinson)
Broadcom STB PCIe controller driver:
- No change, but products using certain WiFi devices may be affected
by removal of CONFIG_PCIE_BUS_* (see above)
Freescale i.MX6 PCIe controller driver:
- Move IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling into the core reset
functions (Richard Zhu)
- Assert PERST# before enabling regulators to ensure that even if
power is enabled, endpoint stays inactive until REFCLK is stable
(Sherry Sun)
- Parse reset properties in Root Port nodes (falling back to host
bridge) to help support Key E connectors and the pwrctrl framework
(Sherry Sun)
- Configure i.MX95 REF_USE_PAD before PHY reset (Richard Zhu)
- Assert i.MX95 ref_clk_en after reference clock stabilizes (Richard
Zhu)
- Integrate new pwrctrl API for DTs with Root Port-level power
supplies (Sherry Sun)
Intel Gateway PCIe controller driver:
- Enable clock before PHY init for correct ordering (Florian Eckert)
- Add .start_link() callback so the driver works again (Florian
Eckert)
- Stop overwriting the ATU base address discovered by
dw_pcie_get_resources() (Florian Eckert)
- Add DT 'atu' region since this is hardware-specific, and fall back
to driver default if lacking (Florian Eckert)
Loongson PCIe controller driver:
- Ignore downstream devices only on internal bridges to avoid
Loongson hardware issue (Rong Zhang)
- Quirk old Loongson-3C6000 bridges that advertise incorrect
supported link speeds (Ziyao Li)
Marvell MVEBU PCIe controller driver:
- Use fixed-width interrupt masks to avoid truncation in 64-bit
builds (Rosen Penev)
MediaTek PCIe controller driver:
- Use FIELD_PREP() to fix incorrect operator precedence in
PCIE_FTS_NUM_L0 (Li RongQing)
- Fix IRQ domain leak when port fails to enable (Manivannan
Sadhasivam)
- Use actual physical address for MSI message address instead of
virt_to_phys() (Manivannan Sadhasivam)
- Add EcoNet EN7528 to DT binding (Caleb James DeLisle)
MediaTek PCIe Gen3 controller driver:
- Deassert PCIE_PHY_RSTB so REFCLK is stable for at least 100ms
(PCIE_T_PVPERL_MS) before deasserting PERST# (Jian Yang)
- Add .shutdown() to assert PERST# before powering down device (Jian
Yang)
- Do full device power down on removal, including asserting PERST#,
when removing driver (Chen-Yu Tsai)
- Fix a 'failed to create pwrctrl devices' error message that was
inadvertently skipped (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Program the DesignWare PORT_AFR L1 entrance latency based on the
'aspm-l1-entry-delay-ns' DT property (Manikanta Maddireddy)
Qualcomm PCIe controller driver:
- Add Eliza SoC compatible in DT binding (Krishna Chaitanya Chundru)
- Set max OPP during resume so DBI register accesses don't fail with
NoC errors (Qiang Yu)
- Add pci_host_common_d3cold_possible() to determine whether
downstream devices are already in D3hot and wakeup-enabled devices
are capable of generating PME from D3cold (Krishna Chaitanya
Chundru)
- Add .get_ltssm() callback to get the LTSSM status without DBI,
since DBI may be inaccessible after PME_Turn_Off (Krishna Chaitanya
Chundru)
- Power down PHY via PARF_PHY_CTRL before disabling rails/clocks to
avoid power leakage (Krishna Chaitanya Chundru)
- Decide whether suspend should put the link in L2 and power down
using pci_host_common_d3cold_possible() instead of checking whether
ASPM L1 is enabled (Krishna Chaitanya Chundru)
- Add qcom D3cold support to tear down interconnect bandwidth and OPP
votes (Krishna Chaitanya Chundru)
- Handle unsupported mixed PERST#/PHY DT configurations, e.g., PHY in
RP node while PERST# is in the RC node, but warn about the DT issue
(Qiang Yu)
- Program T_POWER_ON based on DT 't-power-on-us' property in case
hardware advertises incorrect values (Krishna Chaitanya Chundru)
- Disable ASPM L0s for SA8775P (Shawn Guo)
- Initialize DWC MSI lock for firmware-managed ECAM hosts, which
don't use the dw_pcie_host_init() path that initializes the lock
(Yadu M G)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/V2N DT support (Lad Prabhakar)
SOPHGO PCIe controller driver:
- Add 'dma-coherent' DT property for sg2042-pcie driver (Han Gao)
Synopsys DesignWare PCIe controller driver:
- Apply ECRC TLP Digest workaround for all DesignWare cores prior to
5.10a, not just 4.90a and 5.00a (Manikanta Maddireddy)
- Use common struct dw_pcie 'mode' rather than duplicating it in
artpec6, dra7xx, dwc-pcie, and keembay driver structs (Hans Zhang)
- Use DEFINE_SHOW_ATTRIBUTE for ltssm_status debugfs to reduce
boilerplate and fix a seq_file memory leak by including a
.release() callback (Hans Zhang)
- Fix a signedness bug in fault injection test code (Dan Carpenter)
- Avoid NULL pointer dereference when tearing down debugfs for
controller that lacks RAS DES capability (Shuvam Pandey)
MicroSemi Switchtec management driver:
- Add Gen6 Device IDs (Ben Reed)
Miscellaneous:
- Remove unused gpio.h include from amd-mdb, designware-plat, fu740,
visconti drivers (Andy Shevchenko)
- Fix typos in documentation (josh ziegler)
- Use FIELD_MODIFY() instead of open-coding it (Hans Zhang)"
* tag 'pci-v7.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (168 commits)
PCI/sysfs: Use kstrtobool() to parse the ROM attribute input
PCI/sysfs: Limit BAR resize attribute scope to platforms with PCI mmap
PCI/sysfs: Remove pci_create_legacy_files() and pci_sysfs_init()
PCI/sysfs: Convert legacy I/O and memory attributes to static definitions
PCI/sysfs: Add __weak pci_legacy_has_sparse() helper
alpha/PCI: Compute legacy size in pci_mmap_legacy_page_range()
PCI: Add macros for legacy I/O and memory address space sizes
PCI/sysfs: Remove pci_{create,remove}_sysfs_dev_files()
alpha/PCI: Convert resource files to static attributes
alpha/PCI: Add static PCI resource attribute macros
alpha/PCI: Remove WARN from __pci_mmap_fits() and __legacy_mmap_fits()
alpha/PCI: Fix __pci_mmap_fits() overflow for zero-length BARs
alpha/PCI: Use PCI resource accessor macros
alpha/PCI: Use BAR index in sysfs attr->private instead of resource pointer
alpha/PCI: Add security_locked_down() check to pci_mmap_resource()
PCI/sysfs: Limit pci_sysfs_init() late_initcall compile scope
PCI/sysfs: Add stubs for pci_{create,remove}_sysfs_dev_files()
PCI/sysfs: Warn about BAR resize failure in __resource_resize_store()
PCI/sysfs: Convert PCI resource files to static attributes
PCI/proc: Fix race between pci_proc_init() and pci_bus_add_device()
...
Pull input updates from Dmitry Torokhov:
- A new driver for Wacom W9000-series penabled touchscreens
- Updates to STM FTS driver adding support for reset line and preparing
the driver for STMFTS5 support
- Updates to RMI4 and IMS PCU drivers hardening the code
- Support for half-duplex mode restored in ADS7846 driver
- Updates to driver's device_id tables to use named initializers
- Removal of no longer used PCAP keys and touchscreen drivers (support
for the ezx series of phones was removed in 2022)
- Removal of xilinx_ps2 driver which is no longer used either
- Updates to userio to allow setting up additional serio port
characteristics (such as id, extra and proto)
- Assorted hardening and cleanup fixes for other drivers
* tag 'input-for-v7.2-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (72 commits)
Input: mms114 - fix touch indexing for MMS134S and MMS136
Input: elan_i2c - prevent division by zero and arithmetic underflow
Input: stop force-feedback timer when unregistering input devices
Input: iforce - bound the device-reported force-feedback effect index
Input: goodix - clamp the device-reported contact count
Input: mms114 - reject an oversized device packet size
Input: touchwin - reset the packet index on every complete packet
Input: rmi4 - update formatting in F12
Input: rmi4 - propagate proper error code in F12 sensor tuning
Input: rmi4 - simplify size calculations in F12
Input: rmi4 - use sizeof(*ptr) and idiomatic checks in f12 allocators
Input: rmi4 - use devm_kmalloc for F12 data packet buffer
Input: rmi4 - use flexible array member for IRQ masks in F12
Input: rmi4 - use unaligned access helpers in F12
Input: rmi4 - change reg_size type to u32
Input: rmi4 - refactor F12 probe function
Input: rmi4 - use kzalloc_flex() for struct rmi_function
Input: rmi4 - refactor function allocation and registration
Input: rmi4 - use local presence map in rmi_read_register_desc()
Input: rmi4 - fix limit in rmi_register_desc_has_subpacket()
...
* Fix S390_USER_OPEREXEC so it can now be enabled regardless of other
unrelated capabilities
* Fix handling of the _PAGE_UNUSED pte bit that could lead to guest
memory corruption in some scenarios
* A bunch of misc gmap fixes (locking, behaviour under memory pressure)
* Fix CMMA dirty tracking
Pull NFS client updates from Anna Schumaker:
"New features:
- XPRTRDMA: Decouple req recycling from RPC completion
- NFS: Expose FMODE_NOWAIT for read-only files
Bugfixes:
- SUNRPC:
- Fix sunrpc sysfs error handling
- Fix uninitialized xprt_create_args structure
- XPRTRDMA:
- Harden connect and reply handling
- NFS:
- Fix EOF updates after fallocate/zero-range
- Keep PG_UPTODATE clear after read errors in page groups
- Use nfsi->rwsem to protect traversal of the file lock list
- Prevent resource leak in nfs_alloc_server()
- NFSv4:
- Clear exception state on successful mkdir retry
- Don't skip revalidate when holding a dir delegation and attrs are stale
- pNFS:
- Fix use-after-free in pnfs_update_layout()
- Defer return_range callbacks until after inode unlock
- Fix LAYOUTCOMMIT retry loop on OLD_STATEID
- Reject zero-length r_addr in nfs4_decode_mp_ds_addr
- NFS/flexfiles:
- Reject zero-length filehandle version arrays
- Fix checking if a layout is striped
- Fixes for honoring FF_FLAGS_NO_IO_THRU_MDS
Other cleanups and improvements:
- Remove the fileid field from struct nfs_inode
- Move long-delayed xprtrdma work onto the system_dfl_long_wq
- Convert xprtrdma send buffer free list to an llist
- Show "<redacted>" for cert_serial and privkey_serial mount options"
* tag 'nfs-for-7.2-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (42 commits)
NFS: Use common error handling code in nfs_alloc_server()
NFS: Prevent resource leak in nfs_alloc_server()
NFSv4/pNFS: reject zero-length r_addr in nfs4_decode_mp_ds_addr
nfs: don't skip revalidate on directory delegation when attrs flagged stale
xprtrdma: Return sendctx slot after Send preparation failure
xprtrdma: Repost Receive buffers for malformed replies
xprtrdma: Sanitize the reply credit grant after parsing
xprtrdma: Fix bcall rep leak and unbounded peek
xprtrdma: Resize reply buffers before reposting receives
xprtrdma: Check frwr_wp_create() during connect
xprtrdma: Initialize re_id before removal registration
xprtrdma: Fix ep kref imbalance on ADDR_CHANGE
xprtrdma: Convert send buffer free list to llist
NFS: correct CONFIG_NFS_V4 macro name in #endif comment
nfs: use nfsi->rwsem to protect traversal of the file lock list
NFSv4.1/pNFS: fix LAYOUTCOMMIT retry loop on OLD_STATEID
nfs: expose FMODE_NOWAIT for read-only files
nfs: add nowait version of nfs_start_io_direct
NFSv4/flexfiles: honor FF_FLAGS_NO_IO_THRU_MDS in pg_get_mirror_count_write
NFSv4/flexfiles: honor FF_FLAGS_NO_IO_THRU_MDS on fatal DS connect errors
...
Pull f2fs updates from Jaegeuk Kim:
"The changes primarily focus on filesystem error reporting, reducing
memory footprint by reverting in-memory data structures used for
runtime validation, honoring FDP hints, and adding trace and debug
logs. In addition, there are critical bug fixes resolving
out-of-bounds read vulnerabilities in inline directory and ACL
handling, potential deadlocks in balance_fs, use-after-free issues in
atomic writes, and false data/node type assignments in large sections.
Enhancements:
- Revert in-memory sit version and block bitmaps
- support to report fserror
- add trace_f2fs_fault_report
- add iostat latency tracking for direct IO
- add logs in f2fs_disable_checkpoint()
- honor per-I/O write streams for direct writes
- map data writes to FDP streams
- skip inode folio lookup for cached overwrite
- skip direct I/O iostat context when disabled
- revert "check in-memory block bitmap"
- revert "check in-memory sit version bitmap"
Fixes:
- optimize representative type determination in GC
- fix incorrect FI_NO_EXTENT handling in __destroy_extent_node()
- fix potential deadlock in f2fs_balance_fs()
- fix potential deadlock in gc_merge path of f2fs_balance_fs()
- atomic: fix UAF issue on f2fs_inode_info.atomic_inode
- fix missing read bio submission on large folio error
- pass correct iostat type for single node writes
- fix to do sanity check on f2fs_get_node_folio_ra()
- validate orphan inode entry count
- keep atomic write retry from zeroing original data
- read COW data with the original inode during atomic write
- validate inline dentry name lengths before conversion
- validate dentry name length before lookup compares it
- reject setattr size changes on large folio files
- revert "remove non-uptodate folio from the page cache in move_data_block"
- validate ACL entry sizes in f2fs_acl_from_disk()
- bound i_inline_xattr_size for non-inline-xattr inodes
- fix listxattr handling of corrupted xattr entries
- fix to round down start offset of fallocate for pin file"
* tag 'f2fs-for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (42 commits)
f2fs: fix to round down start offset of fallocate for pin file
f2fs: fix listxattr handling of corrupted xattr entries
f2fs: skip direct I/O iostat context when disabled
f2fs: remove unneeded f2fs_is_compressed_page()
f2fs: avoid unnecessary fscrypt_finalize_bounce_page()
f2fs: avoid unnecessary sanity check on ckpt_valid_blocks
f2fs: misc cleanup in f2fs_record_stop_reason()
f2fs: fix wrong description in printed log
f2fs: bound i_inline_xattr_size for non-inline-xattr inodes
f2fs: validate ACL entry sizes in f2fs_acl_from_disk()
Revert "f2fs: remove non-uptodate folio from the page cache in move_data_block"
f2fs: Split f2fs_write_end_io()
f2fs: Rename f2fs_post_read_wq into f2fs_wq
f2fs: Prepare for supporting delayed bio completion
f2fs: reject setattr size changes on large folio files
f2fs: validate dentry name length before lookup compares it
f2fs: validate inline dentry name lengths before conversion
f2fs: read COW data with the original inode during atomic write
f2fs: skip inode folio lookup for cached overwrite
f2fs: keep atomic write retry from zeroing original data
...
Pull dmaengine updates from Vinod Koul:
"Core:
- New devm_of_dma_controller_register() API
- Refactor devm_dma_request_chan() API
New Support:
- Loongson Multi-Channel DMA controller support
- Renesas RZ/{T2H,N2H} support
- Dw CV1800B DMA support
- Switchtec DMA engine driver
U pdates:
- Xilinx AXI dma binding conversion
- Renesas CHCTRL register read updates
- AMD MDB Endpoint and non-LL mode Support
- AXI dma handling of SW and HW cyclic transfers termination
- Intel ioatdma and idxd driver updates"
* tag 'dmaengine-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (62 commits)
dt-bindings: dma: snps,dw-axi-dmac: Add fallback compatible for CV1800B
MAINTAINERS: dmaengine/ti: Remove myself and add Vignesh as maintainer
dmaengine: qcom: Unify user-visible "Qualcomm" name
dt-bindings: dma: qcom,gpi: Document GPI DMA engine for Shikra SoC
dmaengine: qcom: hidma: use sysfs_emit() in sysfs show callbacks
dmaengine: dw-axi-dmac: fix PM for system sleep and channel alloc
dmaengine: dw-axi-dmac: drop redundant DMAC enable in block start
dmaengine: altera-msgdma: Use memcpy_toio for descriptor FIFO writes
dt-bindings: dma: fsl-edma: add dma-channel-mask property description
dmaengine: tegra: Fix burst size calculation
dmaengine: iop32x-adma: Remove a leftover header file
dmaengine: dma-axi-dmac: use DMA pool to manange DMA descriptor
dmaengine: dma-axi-dmac: Drop struct clk from main struct
dmaengine: dma-axi-dmac: Properly free struct axi_dmac_desc
dmaengine: Fix possible use after free
dmaengine: dw-edma: Add spinlock to protect DONE_INT_MASK and ABORT_INT_MASK
dmaengine: dw-edma-pcie: Reject devices without driver data
dmaengine: sh: rz-dmac: Add DMA ACK signal routing support
irqchip/renesas-rzv2h: Add DMA ACK signal routing support
dmaengine: dw-edma: Remove dw_edma_add_irq_mask()
...
Pull phy updates from Vinod Koul:
"Bunch of new driver, device support in existing drivers/binding and
few updates to existing drivers
New Support:
- Qualcomm Eliza QMP PHY, Eliza Synopsys eUSB2 support, Eliza PCIe
phy support, Nord QMP UFS PHY, IPQ5210 USB3 PHY support
- Econet EN751221 and EN7528 PCIe phy support
- NXPs TJA1145 CAN transceiver phy support
- TI DS125DF111 retimer phy support
- Rockchip RK3528 usb phy support
- TI J722S phy support
- Axiado eMMC PHY driver
- EyeQ5 Ethernet PHY driver
- Generic PHY driver for Lynx 10G SerDes
- Spacemit K3 USB2 PHY support
Updates:
- Tomi helping maintian zynqmp phys
- lynx phy updates to support 25GBASER
- Rockchip GRF for RK3568/RV1108 support
- Qualcomm QSERDES COM v2 support"
* tag 'phy-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (87 commits)
phy: rockchip: inno-usb2: Add missing clkout_ctl_phy kerneldoc
phy: Move MODULE_DEVICE_TABLE next to the table itself
phy: add basic support for NXPs TJA1145 CAN transceiver
dt-bindings: phy: add support for NXPs TJA1145 CAN transceiver
phy: freescale: phy-fsl-imx8qm-lvds-phy: Fix missing pm_runtime_disable() on probe error path
dt-bindings: phy: qcom,qmp-usb: Add ipq5210 USB3 PHY
dt-bindings: phy: qcom,qusb2: Document IPQ5210 compatible
phy: freescale: phy-fsl-imx8qm-lvds-phy: Use synchronous PM runtime put in reset
MAINTAINERS: expand Lynx 28G entry to cover Lynx 10G SerDes
phy: lynx-10g: new driver
dt-bindings: phy: lynx-10g: initial document
phy: lynx-28g: improve phy_validate() procedure
phy: lynx-28g: optimize read-modify-write operation
phy: lynx-28g: add support for big endian register maps
phy: lynx-28g: common probe() and remove()
phy: lynx-28g: make lynx_28g_pll_read_configuration() callable per PLL
phy: lynx-28g: move struct lynx_info definitions downwards
phy: lynx-28g: provide default lynx_lane_supports_mode() implementation
phy: lynx-28g: generalize protocol converter accessors
phy: lynx-28g: common lynx_pll_get()
...
- Fix typos in documentation (josh ziegler)
- Use FIELD_MODIFY() instead of open-coding it (Hans Zhang)
* pci/misc:
PCI: Use FIELD_MODIFY() instead of open-coding it
Documentation: PCI: Fix typos
- Use FIELD_PREP() to fix incorrect operator precedence in PCIE_FTS_NUM_L0
(Li RongQing)
- Fix IRQ domain leak when port fails to enable (Manivannan Sadhasivam)
- Use actual physical address for MSI message address instead of
virt_to_phys() (Manivannan Sadhasivam)
- Add EcoNet EN7528 to DT binding (Caleb James DeLisle)
* pci/controller/mediatek:
dt-bindings: PCI: mediatek: Add support for EcoNet EN7528
PCI: mediatek: Use actual physical address instead of virt_to_phys()
PCI: mediatek: Fix IRQ domain leak when port fails to enable
PCI: mediatek: Fix operator precedence in PCIE_FTS_NUM_L0 macro
- Enable clock before PHY init for correct ordering (Florian Eckert)
- Add .start_link() callback so the driver works again (Florian Eckert)
- Stop overwriting the ATU base address discovered by
dw_pcie_get_resources() (Florian Eckert)
- Add DT 'atu' region since this is hardware-specific, and fall back to
driver default if lacking (Florian Eckert)
* pci/controller/dwc-intel-gw:
dt-bindings: PCI: intel,lgm-pcie: Add 'atu' resource
PCI: intel-gw: Fix ATU base address setup and add optional DT 'atu' region
PCI: intel-gw: Add .start_link() callback
PCI: intel-gw: Enable clock before PHY init
PCI: intel-gw: Move interrupt enable to own function
PCI: intel-gw: Remove unused PCIE_APP_INTX_OFST definition
- Move IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling into the core reset
functions (Richard Zhu)
- Add pci_host_common_parse_ports() for use by any native driver to parse
Root Port properties (currently only reset GPIOs) (Sherry Sun)
- Assert PERST# before enabling regulators to ensure that even if power is
enabled, endpoint stays inactive until REFCLK is stable (Sherry Sun)
- Parse reset properties in Root Port nodes (falling back to host bridge)
to help support Key E connectors and the pwrctrl framework (Sherry Sun)
- Configure i.MX95 REF_USE_PAD before PHY reset (Richard Zhu)
- Assert i.MX95 ref_clk_en after reference clock stabilizes (Richard Zhu)
- Integrate new pwrctrl API for DTs with Root Port-level power supplies
(Sherry Sun)
* pci/controller/dwc-imx6:
PCI: imx6: Integrate new pwrctrl API
PCI: imx6: Assert ref_clk_en after reference clock stabilizes on i.MX95
PCI: imx6: Configure REF_USE_PAD before PHY reset for i.MX95
PCI: imx6: Parse 'reset-gpios' in Root Port nodes
PCI: imx6: Assert PERST# before enabling regulators
PCI: host-generic: Add common helpers for parsing Root Port properties
dt-bindings: PCI: fsl,imx6q-pcie: Add reset GPIO in Root Port node
PCI: imx6: Fix IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling
Pull sched_ext tree reorg from Tejun Heo:
"Pure source reorganization with no functional change:
- the kernel/sched/ext* files move into a new kernel/sched/ext/
subdirectory
- the headers and sources are made self-contained so editor tooling
can parse each file on its own"
* tag 'sched_ext-for-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Move shared helpers from ext.c into internal.h and cid.h
sched_ext: Make kernel/sched/ext/ sources self-contained for clangd
sched_ext: Move sources under kernel/sched/ext/
The UIO howto still documents an mmap callback in struct uio_info.
That field was replaced by mmap_prepare, which takes a struct
vm_area_desc.
A UIO driver following the current howto no longer builds because
struct uio_info has no mmap member. Update the documented callback
signature and matching text to match the current API.
Fixes: 933f05f58a ("uio: replace deprecated mmap hook with mmap_prepare in uio_info")
Signed-off-by: Doehyun Baek <doehyunbaek@gmail.com>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260622181821.1195257-1-doehyunbaek@gmail.com>
Pull more MM updates from Andrew Morton:
- "khugepaged: add mTHP collapse support" (Nico Pache)
Provide khugepaged with the capability to collapse anonymous memory
regions to mTHPs
- "Remove CONFIG_READ_ONLY_THP_FOR_FS and enable file THP for writable
files" (Zi Yan)
Remove the READ_ONLY_THP_FOR_FS check in file_thp_enabled(), so that
khugepaged and MADV_COLLAPSE can run on filesystems with PMD THP
pagecache support even without READ_ONLY_THP_FOR_FS enabled
- "make MM selftests more CI friendly" (Mike Rapoport)
General fixes and cleanups to the MM selftests. Also move more MM
selftests under the kselftest framework, making them more amenable to
ongoing CI testing
- "selftests/mm: fix failures and robustness improvements" and
"selftests/mm: assorted fixes for hmm-tests" (Sayali Patil)
Fix several issues in MM selftests which were revealed by powerpc 64k
pagesize
* tag 'mm-stable-2026-06-23-08-55' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (118 commits)
Revert "mm: limit filemap_fault readahead to VMA boundaries"
mm/vmscan: pass NULL to trace vmscan node reclaim
mm: use mapping_mapped to simplify the code
selftests/mm: fix exclusive_cow test fork() handling
selftests/mm: remove hardcoded THP sizing assumptions in hmm tests
selftests/mm: allow PUD-level entries in compound testcase of hmm tests
mm/gup_test: reject wrapped user ranges
mm/page_frag: reject invalid CPUs in page_frag_test
mm/damon/core: always put unsuccessfully committed target pids
mm: page_isolation: avoid unsafe folio reads while scanning compound pages
mm/shrinker: do not hold RCU lock in shrinker_debugfs_count_show()
selftests: mm: fix and speedup "droppable" test
mm: merge writeout into pageout
MAINTAINERS: add Hao Ge as reviewer for codetag and alloc_tag
selftests/mm: clarify alternate unmapping in compaction_test
selftests/mm: move hwpoison setup into run_test() and silence modprobe output for memory-failure category
selftests/mm: skip uffd-stress test when nr_pages_per_cpu is zero
selftests/mm: skip uffd-wp-mremap if UFFD write-protect is unsupported
selftests/mm: ensure destination is hugetlb-backed in hugetlb-mremap
selftest/mm: register existing mapping with userfaultfd in hugetlb-mremap
...
Pull perf tools updates from Arnaldo Carvalho de Melo:
- Introduce 'perf inject --aslr' to remap ASLR-randomized addresses in
perf.data files, enabling reproducible analysis across runs with
different address space layouts
- Refactor evsel out of sample processing paths: store evsel in struct
perf_sample and remove the redundant evsel parameter from tool APIs,
tracepoint handlers, hist entry iterators, and db-export, simplifying
the entire tool callback chain
- Switch architecture detection from string-based perf_env__arch()
comparisons to the numeric ELF e_machine field across the codebase
(capstone, print_insn, c2c, lock-contention, sort, sample-raw,
machine, header), making cross-analysis more robust
- Overhaul ARM CoreSight ETM tests: add deterministic and named_threads
workloads, speed up basic and disassembly tests, add process
attribution and concurrent threads tests, remove unused workloads and
duplicate tests, queue context packets for the frontend decoder
- Add ARM SPE IMPDEF event decoding for Arm Neoverse N1, store MIDR in
arm_spe_pkt for per-CPU event mapping, handle missing CPU IDs
gracefully
- Refactor libunwind support: remove the libunwind-local backend, make
register reading cross-platform, add RISC-V libunwind support, allow
dynamic selection between libdw and libunwind unwinding at runtime
- Extensive hardening of perf.data parsing against crafted files: add
bounds checks and byte-swap validation for session records, feature
sections, header attributes, BPF metadata, auxtrace errors,
compressed events, CPU maps, build ID notes, and ELF program headers.
Add minimum event size validation and file offset diagnostics
- Fix libdw API contract violations across dwarf-aux, libdw,
probe-finder, annotate-data, and debuginfo subsystems. Fix callchain
parent update in ORDER_CALLER mode, support DWARF line 0 in inline
lists, handle multiple address spaces in callchains
- Fix numerous 'perf sched' bugs: thread reference leaks, memory leaks,
heap overflows with cross-machine recordings, NULL dereferences,
replace BUG_ON assertions with graceful error handling, bounds-check
CPU indices, fix SIGCHLD vs pause() races in sched stats
- Overhaul the build system: move BPF skeleton generation out of
Makefile.perf into bpf_skel.mak, decouple pmu-events from the prepare
target, make beauty generated C code standalone .o files, compile BPF
skeletons with -mcpu=v3, fix continuous rebuilds, various cleanups
- Add 'perf test' JUnit XML reporting with -j/--junit option, split
monolithic test suites into sub-tests, add summary reporting,
refactor parallel poll loop, fix test failures on musl-based systems
- Fix 'perf c2c' memory leaks in hist entry and format list handling,
use-after-free in error paths, bounds-check CPU and node IDs
- Fix 'perf bpf' metadata leaks on duplicate insert and alloc failure,
bounds-check array offsets, validate event sizes and func_info
fields, add NULL checks
- Fix hwmon PMU: off-by-one null termination on sysfs reads, strlcpy
buffer overflow in parse_hwmon_filename(), fd 0 check, empty label
reads, scnprintf usage
- Fix symbols subsystem: bounds-check ELF and sysfs build ID note
iteration, validate p_filesz, fix 32-bit ELF bswap error, fix signed
overflow in size checks, bounds-check .gnu_debuglink section
- Fix tools lib api: null termination in filename__read_int/ull(),
uninitialized stack data in filename__write_int(), snprintf
truncation in mount_overload()
- Replace libbabeltrace with babeltrace2-ctf-writer for CTF conversion
in 'perf data'
- Add RISC-V SDT argument parsing for static tracepoints
- Add 'perf trace --show-cpu' option to display CPU id
- Add 'perf bench sched pipe --write-size' option
- Add a perf-specific .clang-format that overrides some kernel style
behaviors
- Update Intel vendor events for Alder Lake, Arrow Lake, Clearwater
Forest, Emerald Rapids, Granite Rapids, Grand Ridge, Lunar Lake,
Meteor Lake, Panther Lake, Sapphire Rapids, Sierra Forest
- Add IOMMU metrics for AMD and Intel
- Fix AMD event: switch l2_itlb_misses to
bp_l1_tlb_miss_l2_tlb_miss.all
- Add AMD IBS improvements: decode Streaming-store and Remote-Socket
flags, suppress bogus fields on Zen4+, skip privilege test on Zen6+
- Fix 'perf lock contention' SIGCHLD vs pause() race, allow 'mmap_lock'
in -L filter, enable end-timestamp for cgroup aggregation, fix
non-atomic data updates
- Fix 'perf stat' false NMI watchdog warning in aggregation modes,
bounds-check CPU index in topology callbacks, add aggr_nr metric
parser support for uncore scaling
- Fix 'perf timechart' memory leaks, CPU bounds checking,
use-after-free on corrupted callchains
- Fix 'perf inject' itrace branch stack synthesis, fix synthesized
sample size with branch stacks
- Fix DSO heap overflow on decompressed paths, uninitialized pathname
on fallback, set proper error codes
- Fix various snprintf/scnprintf usages to prevent buffer overflows and
truncation across the codebase
- Fix off-by-one stack buffer overflow in kallsyms__parse()
- Fix 'perf kwork' memory management, address sanitizer issues, bounds
check work->cpu
- Fix 'perf tpebs' concurrent stop races and PID reuse hazards
- Add O_CLOEXEC to open() calls and use mkostemp() for temporary files
to prevent file descriptor leaks to child processes
- Fix s390 Python extension TEXTREL by compiling as PIC
- Fix build with ASAN for jitdump
- Fix build failure due to btf_vlen() return type change
* tag 'perf-tools-for-v7.2-1-2026-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (343 commits)
perf bpf: Fix up build failure due to change of btf_vlen() return type
perf dso: Set standard errno on decompression failure
perf bpf: Validate array presence before casting BPF prog info pointers
perf c2c: Fix hist entry and format list leaks in c2c_he_free()
perf c2c: Free format list entries when c2c_hists__init() fails
perf cs-etm: Bounds-check CPU in cs_etm__get_queue()
perf cs-etm: Require full global header in auxtrace_info size check
perf cs-etm: Validate num_cpu before metadata allocation
perf machine: Use snprintf() for guestmount path construction
perf machine: Propagate machine__init() error to callers
perf trace: Guard __probe_ip suppression with evsel__is_probe()
perf evsel: Add lazy-initialized probe type detection helpers
perf evsel: Add no-libtraceevent stubs for evsel__field() and evsel__common_field()
perf cs-etm: Reject CPU IDs that would overflow signed comparison
perf c2c: Free format list entries when releasing c2c hist entries
perf bpf: Bounds-check array offsets in bpil_offs_to_addr()
perf bpf: Reject oversized BPF metadata events that truncate header.size
perf bpf: Validate func_info_rec_size and sub_id in synthesize_bpf_prog_name()
perf sched: Replace (void*)1 sentinel with proper runtime allocation
perf hwmon: Fix fd check to accept fd 0 in hwmon_pmu__describe_items()
...
Pull x86 platform driver updates from Ilpo Järvinen:
- amd/hfi: Add support for dynamic ranking tables (version 3)
- amd/pmc:
- Add PMC driver support for AMD 1Ah M80H SoC
- Delay suspend for some Lenovo Laptops to avoid keyboard and lid
switch problems after s2idle
- arm64: qcom-hamoa-ec: Add Hamoa/Purwa/Glymur EC driver
- asus-armoury: add support for G614PR, GA402NJ, GA403UM, and FX608JPR
- asus-wmi: add keystone dongle support
- dell-dw5826e: Add reset driver for DW5826e
- dell-laptop: Fix rollback path
- hp-wmi:
- Add support for Omen 16-ap0xxx (board ID 8D26) and board ID 8B2F
- intel-hid:
- Add HP ProBook x360 440 G1 5 button array support
- Prevent racing ACPI notify handlers
- intel/pmc:
- Add Nova Lake support
- Rate-limit LTR scale-factor warning
- intel-uncore-freq:
- Expose instance ID in the sysfs
- Fix current_freq_khz after CPU hotplug
- intel/vsec: Restore BAR fallback for header walk
- ISST: Restore SST-PP control to all domains
- lenovo-wmi-*:
- Add more CPU tunable attributes
- Add GPU tunable attributes
- Add WMI battery charge limiting
- oxpec: add support for OneXPlayer Super X
- sel3350-platform: Retain LED state on load and unload
- surface: SAM: Add support for Surface Pro 12in
- uniwill-laptop: Add support for battery charge modes
- tools/power/x86/intel-speed-select: Harden daemon pidfile open
- Major refactoring efforts:
- ACPI driver to platform driver conversion
- Converting drivers to use the improved WMI API
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (115 commits)
platform/x86/intel/pmc: Add NVL PCI IDs for SSRAM telemetry discovery
platform/x86/intel/pmc/ssram: Make PMT registration optional
platform/x86/intel/pmc/ssram: Add ACPI discovery scaffolding
platform/x86/intel/pmc/ssram: Switch to static array with per-index probe state
platform/x86/intel/pmc/ssram: Refactor DEVID/PWRMBASE extraction into helper
platform/x86/intel/pmc/ssram: Add PCI platform data
platform/x86/intel/pmc/ssram: Rename probe and PCI ID table for consistency
platform/x86/intel/pmc: Add ACPI PWRM telemetry driver for Nova Lake S
platform/x86/intel/pmc: Add PMC SSRAM Kconfig description
platform/x86/intel/pmt: Unify header fetch and add ACPI source
platform/x86/intel/pmt: Cache the telemetry discovery header
platform/x86/intel/pmt: Pass discovery index instead of resource
platform/x86/intel/pmt/telemetry: Move overlap check to post-decode hook
platform/x86/intel/pmt/crashlog: Split init into pre-decode
platform/x86/intel/pmt: Add pre/post decode hooks around header parsing
modpost: Handle malformed WMI GUID strings
platform/wmi: Make sysfs attributes const
platform/wmi: Make wmi_bus_class const
hwmon: (dell-smm) Use new buffer-based WMI API
platform/x86: dell-ddv: Use new buffer-based WMI API
...
