Dirty rectangle feature allows FBC to recompress a subsection
of a frame. When this feature is enabled, display will read
the scan lines between dirty rectangle start line and dirty
rectangle end line in subsequent frames.
Use the merged damage clip stored in the plane state to
configure the FBC dirty rect areas.
v2: - Move dirty rect handling to fbc state (Ville)
v3: - Use intel_fbc_dirty_rect_update_noarm (Ville)
- Split plane damage collection and dirty rect preparation
- Handle case where dirty rect fall outside the visible region
v4: - A state variable to check if we need to update dirty rect
registers in case intel_fbc_can_flip_nuke() (Ville)
v5: - No need to use a separate valid flag, updates to the
conditions for prepare damage rect (Ville)
- Usage of locks in fbc dirty rect related functions (Ville)
v6: - updates dirty rect handling (Ville)
v7: - Loop through all planes in atomic state is good enough (Ville)
Bspec: 68881, 71675, 73424
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228093802.27091-8-vinod.govindapillai@intel.com
If FBC is already active, we don't need to call FBC activate
routine again unless there are changes to the fences. So skip
this on all platforms that don't have fences. Any FBC register
updates done after enabling the dirty rect support in xe3 will
trigger nuke by FBC which is counter productive to the fbc
dirty rect feature.
The front buffer rendering sequence will call intel_fbc_flush()
and which will call intel_fbc_nuke() or intel_fbc_activate()
based on FBC status explicitly and won't get impacted by this
change.
v2: use HAS_FBC_DIRTY_RECT()
move this functionality within intel_fbc_activate()
v3: update to intel_fbc_activate logic (Ville)
update to the patch description
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228093802.27091-7-vinod.govindapillai@intel.com
Userspace can pass damage area clips per plane to track
changes in a plane and some display components can utilze
these damage clips for efficiently handling use cases like
FBC, PSR etc. A merged damage area is generated and its
coordinates are updated relative to viewport and HW and
stored in the plane_state. This merged damage areas will be
used for FBC dirty rect support in xe3 in the follow-up
patch.
Big thanks to Ville Syrjala for his contribuitions in shaping
up of this series.
v1: - Move damage_merged helper to cover bigjoiner case and use
the correct plane state for damage find helper (Ville)
- Damage handling code under HAS_FBC_DIRTY_RECT() so the
the related part will be executed only for xe3+
- Changed dev_priv to i915 in one of the functions
v2: - damage reported is stored in the plane state after coords
adjustmentments irrespective of fbc dirty rect support.
- Damage to be empty in case of plane not visible (Ville)
- Handle fb could be NULL and plane not visible cases (Ville)
v3: - No need to empty damage in case disp ver < 12 (Ville)
- update to the patch subject
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228093802.27091-4-vinod.govindapillai@intel.com
Although we have comments in intel_display_limits.h saying that the
code expects PIPE_A and TRANSCODER_A to be zero, it doesn't hurt to add
them as explicit base values for calculating the power domain offset in
POWER_DOMAIN_*() macros.
On the plus side, we have that this:
* Fixes a warning reported by kernel test robot <lkp@intel.com>
about doing arithmetic with two different enum types.
* Makes the code arguably more robust (in the unlikely event of those
bases becoming non-zero).
v2:
- Prefer using explicit base values instead of simply casting the
macro argument to int. (Ville)
- Update commit message to match the new approach (for reference, the
old message subject was "drm/i915/display: Use explicit cast in
POWER_DOMAIN_*() macros").
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502120809.XfmcqkBD-lkp@intel.com/
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250227-improve-type-safey-power-domain-macros-v3-1-b6eaa00f9c33@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Wa_14020863754 applies to the display IP, so we should be checking on
display IP version instead of platform. So, let's replace
display->platform.battlemage with the proper IP version check (14.01 for
Xe2_HPD).
Furthermore, for workarounds, we should be checking on full IP versions
to avoid applying the workaround to some variant of the IP that could
theoretically appear in the future (which is likely to have a different
minor release number), since the issue addressed by the workaround could
be fixed in such new release.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250227-xe3lpd-wa-14020863754-v2-1-92b35de1c563@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Have DSB perform plane scaler programming as well. Changes
to pfit/pipe scaler are not being done on the dsb since those
take the fastset path. However we do now allow DSB based plane
updates when the pfit/pipe scaler is currently enabled (the
pfit/pipe scaler just won't be touched by the DSB).
Fortunately the hardware issue where some scaler registers
are latched at frame start and some at start of vblank has
been fixed on icl+ (IIRC), and since DSB is tgl+ only we
don't have to do any changes to the DSB vblank evasion.
Not that we handle that hardware issue correctly in the
CPU vblank evasion either...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218205850.1422-4-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shakar@intel.com>
We don't actually need any planes to get updated in order
to perform the commit on the DSB. Allow DSB based updates
even when we don't touch planes. The main benefit here
is that pure LUT updates will now go through the DSB path
and therefore we don't have to do vblank evasion/etc. on
the CPU.
I think the reason I had this excluded was that I was
originally contemplating using frame/flip timestamps as
a way to complete the commits. But I had to scrap that
idea when it turned out that those timestamp get
corrupted when DSB is poking at random registers.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218205850.1422-2-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
UAPI Changes:
- Add mmap support for PCI memory barrier (Tejas, Matthew Auld)
- Enable integration with perf pmu, exposing event counters: for now, just
GT C6 residency (Vinay, Lucas)
- Add "survivability mode" to allow putting the driver in a state capable of
firmware upgrade on critical failures (Riana, Rodrigo)
- Add PXP HWDRM support and enable for compatible platforms:
Meteor Lake and Lunar Lake (Daniele, John Harrison)
- Expose package and vram temperature over hwmon subsystem (Raag, Badal, Rodrigo)
Cross-subsystem Changes:
- Backmege drm-next to synchronize with i915 display and other internal APIs
Display Changes (including i915):
- Device probe re-order to help with flicker-free boot (Maarten)
- Align watermark, hpd and dsm with i915 (Rodrigo)
- Better abstraction for d3cold (Rodrigo)
Driver Changes:
- Make sure changes to ccs_mode is with helper for gt sync reset (Maciej)
- Drop mmio_ext abstraction since it didn't prove useful in its current form
(Matt Roper)
- Reject BO eviction if BO is bound to current VM (Oak, Thomas Hellström)
- Add GuC Power Conservation debugfs (Rodrigo)
- L3 cache topology updates for Xe3 (Francois, Matt Atwood)
- Better logging about missing GuC logs (John Harrison)
- Better logging for hwconfig-related data availability (John Harrison)
- Tracepoint updates for xe_bo_create, xe_vm and xe_vma (Oak)
- Add missing SPDX licenses (Francois)
- Xe suballocator imporovements (Michal Wajdeczko)
- Improve logging for native vs SR-IOV driver mode (Satyanarayana)
- Make sure VF bootstrap is not attempted in execlist mode (Maarten)
- Add GuC Buffer Cache abstraction for some CTB H2G actions and use
during VF provisioning (Michal Wajdeczko)
- Better synchronization in gtidle for new users (Vinay)
- New workarounds for Panther Lake (Nirmoy, Vinay)
- PCI ID updates for Panther Lake (Matt Atwood)
- Enable SR-IOV for Panther Lake (Michal Wajdeczko)
- Update MAINTAINERS to stop directing xe changes to drm-misc (Lucas)
- New PCI IDs for Battle Mage (Shekhar)
- Better pagefault logging (Francois)
- SR-IOV fixes and refactors for past and new platforms (Michal Wajdeczko)
- Platform descriptor refactors and updates (Sai Teja)
- Add gt stats debugfs (Francois)
- Add guc_log debugfs to dump to dmesg (Lucas)
- Abstract per-platform LMTT availability (Piotr Piórkowski)
- Refactor VRAM manager location (Piotr Piórkowski)
- Add missing xe_pm_runtime_put when forcing wedged mode (Shuicheng)
- Fix possible lockup when forcing wedged mode (Xin Wang)
- Probe refactors to use cleanup actions with better error handling (Lucas)
- XE_IOCTL_DBG clarification for userspace (Maarten)
- Better xe_mmio initialization and abstraction (Ilia)
- Drop unnecessary GT lookup (Matt Roper)
- Skip client engine usage from fdinfo for VFs (Marcin Bernatowicz)
- Allow to test xe_sync_entry_parse with error injection (Priyanka)
- OA fix for polled read (Umesh)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/m3gbuh32wgiep43i4zxbyhxqbenvtgvtao5sczivlasj7tikwv@dmlba4bfg2ny
drm/i915 feature pull for v6.15:
Features and functionality:
- Enable DP 128b/132b SST DSC (Jani, Imre)
- Allow DSB to perform commits when VRR is enabled (Ville)
- Compute HDMI PLLs for SNPS/C10 PHYs for rates not in fixed tables (Ankit)
- Allow DSB usage when PSR is enabled on LNL+ (Jouni)
- Enable Panel Replay mode change without full modeset (Jouni)
- Enable async flips with compressed buffers on ICL+ (Ville)
- Support luminance based brightness control via DPCD for eDP (Suraj)
- Enable VRR enable/disable without full modeset (Mitul, Ankit)
- Add debugfs facility for force testing HDCP 1.4 (Suraj)
- Add scaler tracepoints, improve plane tracepoints (Ville)
- Improve DMC wakelock debugging facilities (Gustavo)
- Allow GuC SLPC default strategies on MTL+ for performance (Rodrigo)
- Provide more information on display faults (Ville)
Refactoring and cleanups:
- Continue conversions to struct intel_display (Ville, Jani, Suraj, Imre)
- Joiner and Y plane reorganization (Ville)
- Move HDCP debugfs to intel_hdcp.c (Jani)
- Clean up and unify LSPCON interfaces (Jani)
- Move code out of intel_display.c to reduce its size (Ville)
- Clean up and simplify DDI port enabling/disabling (Imre)
- Make LPT LP a dedicated PCH type, refactor (Jani)
- Simplify DSC range BPG offset calculation (Ankit)
- Scaler cleanups (Ville)
- Remove unused code from GVT (David Alan Gilbert)
- Improve plane debugging (Ville)
- DSB and VRR refactoring (Ville)
Fixes:
- Check if vblank is sufficient for DSC prefill and scaler (Mitul)
- Fix Mesa clear color alignment regression (Ville)
- Add missing TC DP PHY lane stagger delay (Imre)
- Fix DSB + VRR usage for PTL+ (Ville)
- Improve robustness of display VT-d workarounds (Ville)
- Fix platforms for dbuf tracker state service programming (Ravi)
- Fix DMC wakelock support conditions (Gustavo)
- Amend DMC wakelock register ranges (Gustavo)
- Disable the Common Primary Timing Generator (CMTG) (Gustavo)
- Enable C20 PHY SSC (Suraj)
- Add workaround for DKL PHY DP mode write (Nemesa)
- Fix build warnings on clamp() usage (Guenter Roeck, Ankit)
- Fix error handling while adding a connector (Imre)
- Avoid full modeset at probe on vblank delay mismatches (Ville)
- Fix encoder HDMI check for HDCP line rekeying (Suraj)
- Fix HDCP repeater authentication during topology change (Suraj)
- Handle display PHY power state reset for power savings (Mika)
- Fix typos all over the place (Nitin)
- Update HDMI TMDS C20 parameters for various platforms (Dnyaneshwar)
- Guarantee a minimum hblank time for 128b/132b and 8b/10b MST (Arun, Imre)
- Do not hardcode LSPCON settle timeout (Giedrius Statkevičius)
Xe driver changes:
- Re-use display vmas when possible (Maarten)
- Remove double pageflip (Maarten)
- Enable DP tunneling (Imre)
- Separate i915 and xe tracepoints (Ville)
DRM core changes:
- Increase DPCD eDP display control CAP size to 5 bytes (Suraj)
- Add DPCD eDP version 1.5 definition (Suraj)
- Add timeout parameter to drm_lspcon_set_mode() (Giedrius Statkevičius)
Merges:
- Backmerge drm-next (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87h64j7b7n.fsf@intel.com
The encoder HW/SW state verification should use a SW state which stays
unchanged while the encoder/output is active. The intel_dp::is_mst flag
used during state computation to choose between the DP SST/MST modes can
change while the output is active, if the sink gets disconnected or the
MST topology is removed for another reason. A subsequent state
verification using intel_dp::is_mst leads then to a mismatch if the
output is disabled/re-enabled without recomputing its state.
Use the encoder's active MST link count instead, which will be always
non-zero for an active MST output and will be zero for SST.
Fixes: 35d2e4b756 ("drm/i915/ddi: start distinguishing 128b/132b SST and MST at state readout")
Fixes: 40d489fac0 ("drm/i915/ddi: handle 128b/132b SST in intel_ddi_read_func_ctl()")
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250224093242.1859583-1-imre.deak@intel.com
Pull i2c fix from Wolfram Sang:
"Revert one cleanup which turned out to eat too much stack space"
* tag 'i2c-for-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: core: Allocate temporary client dynamically
