The CMAC table is used to define how hardware TX a certain packet, and
we can specify TX AMPDU size, so hardware can prepare proper retry window
buffer. Otherwise, it can't transmit with expected aggregation number.
Since each TID could have different aggregation number, the smallest number
is adopted to prevent over peer's receiving buffer.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240115033742.16372-5-pkshih@realtek.com
According to IEEE Std. 802.11, it defines:
Indicates whether the STA is capable of interpreting the Extended NSS BW
Support subfield of the VHT Capabilities Information field.
Some AP such as TP-LINK BE19000 would check it for bandwidth settings, so
causes 80MHz rate when associating on 160 MHz bandwidth. Declare this
capability to yield expected result.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240112062640.36922-5-pkshih@realtek.com
Basically, all chips can support 20/40/80MHz bandwidth, and 8952C can
support 160MHz bandwidth, which is why we introduced support_bw160 before.
The coming WiFi 7 chips will support 320MHz optionally, so change it to
bit mask instead of adding another support_bw320.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240112062640.36922-3-pkshih@realtek.com
EHT capabilities are also stored in struct ieee80211_sband_iftype_data, so
adjust allocation of iftype_data as common part named init_he_eht_cap(),
and then init_eht_cap() can be added later. Don't change logic at all
by this patch.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240112062640.36922-2-pkshih@realtek.com
Currently rtl_usb performs register writes using the async
usb_submit_urb() function. This appears to work fine for the RTL8192CU,
but the RTL8192DU (soon to be supported by rtlwifi) has a problem:
it transmits everything at the 1M rate in the 2.4 GHz band. (The 5 GHz
band is still untested.)
With this patch, rtl_usb performs the register writes using the
synchronous usb_control_msg() function, and the RTL8192DU works
normally. The RTL8192CU still works.
The vendor drivers use the async writes in only one function,
rtl8192du_trigger_gpio_0 / rtl8192cu_trigger_gpio_0, which probably
doesn't even run in real life. They use sync writes everywhere else.
Also, remove "sync" and "async" from the names of the members of
struct rtl_io to avoid confusion:
write{8,16,32}_async -> write{8,16,32}
read{8,16,32}_sync -> read{8,16,32}
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/fb71bae6-8b19-4b6e-b4a6-0d260f2139e1@gmail.com
The firmware of coming WiFi 7 chips can support more AP functions, like
virtual AP, so extend format of download beacon frame to configure them.
Currently rtw89 only enables AP mode as old chips, so leave new fields
zeros.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240108091333.67484-1-pkshih@realtek.com
Download beacon frame via H2C command for AP mode, and then firmware can
issues beacon periodically. Originally TIM offset minus fixed 24 bytes of
frame header implicitly in macro, and this patch explicitly uses
ieee80211_hdrlen() to get header length, but expected to change nothing
at all.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240108091325.67424-1-pkshih@realtek.com
New H2C command is introduced to pause/sleep transmitting. That extends
more bits to support more MAC ID, and currently we still configure 256
MAC ID at most.
This new command is always used by coming WiFi 7 chips, and existing
chips can use old or new command because firmware still preserves the old
one. Add a firmware feature flag to determine which command is adopted
according to firmware version.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240108091315.67358-1-pkshih@realtek.com
The WiFi 6 chips use these commands to create BA CAM entry when RX BA
session is established, this BA CAM can record whether packets are received
or not, then reply BA for current status. This patch doesn't change logic.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240108091245.67220-1-pkshih@realtek.com
With lockdep enabled, calls to the connect function from cfg802.11 layer
lead to the following warning:
=============================
WARNING: suspicious RCU usage
6.7.0-rc1-wt+ #333 Not tainted
-----------------------------
drivers/net/wireless/microchip/wilc1000/hif.c:386
suspicious rcu_dereference_check() usage!
[...]
stack backtrace:
CPU: 0 PID: 100 Comm: wpa_supplicant Not tainted 6.7.0-rc1-wt+ #333
Hardware name: Atmel SAMA5
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x34/0x48
dump_stack_lvl from wilc_parse_join_bss_param+0x7dc/0x7f4
wilc_parse_join_bss_param from connect+0x2c4/0x648
connect from cfg80211_connect+0x30c/0xb74
cfg80211_connect from nl80211_connect+0x860/0xa94
nl80211_connect from genl_rcv_msg+0x3fc/0x59c
genl_rcv_msg from netlink_rcv_skb+0xd0/0x1f8
netlink_rcv_skb from genl_rcv+0x2c/0x3c
genl_rcv from netlink_unicast+0x3b0/0x550
netlink_unicast from netlink_sendmsg+0x368/0x688
netlink_sendmsg from ____sys_sendmsg+0x190/0x430
____sys_sendmsg from ___sys_sendmsg+0x110/0x158
___sys_sendmsg from sys_sendmsg+0xe8/0x150
sys_sendmsg from ret_fast_syscall+0x0/0x1c
This warning is emitted because in the connect path, when trying to parse
target BSS parameters, we dereference a RCU pointer whithout being in RCU
critical section.
Fix RCU dereference usage by moving it to a RCU read critical section. To
avoid wrapping the whole wilc_parse_join_bss_param under the critical
section, just use the critical section to copy ies data
Fixes: c460495ee0 ("staging: wilc1000: fix incorrent type in initializer")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240105075733.36331-3-alexis.lothore@bootlin.com
bcm4331 seems to not function correctly with QoS support. This may be due
to issues with currently available firmware or potentially a device
specific issue.
When queues that are not of the default "best effort" priority are
selected, traffic appears to not transmit out of the hardware while no
errors are returned. This behavior is present among all the other priority
queues: video, voice, and background. While this can be worked around by
setting a kernel parameter, the default behavior is problematic for most
users and may be difficult to debug. This patch offers a working out-of-box
experience for bcm4331 users.
Log of the issue (using ssh low-priority traffic as an example):
ssh -T -vvvv git@github.com
OpenSSH_9.6p1, OpenSSL 3.0.12 24 Oct 2023
debug1: Reading configuration data /etc/ssh/ssh_config
debug2: checking match for 'host * exec "/nix/store/q1c2flcykgr4wwg5a6h450hxbk4ch589-bash-5.2-p15/bin/bash -c '/nix/store/c015armnkhr6v18za0rypm7sh1i8js8w-gnupg-2.4.1/bin/gpg-connect-agent --quiet updatestartuptty /bye >/dev/null 2>&1'"' host github.com originally github.com
debug3: /etc/ssh/ssh_config line 5: matched 'host "github.com"'
debug1: Executing command: '/nix/store/q1c2flcykgr4wwg5a6h450hxbk4ch589-bash-5.2-p15/bin/bash -c '/nix/store/c015armnkhr6v18za0rypm7sh1i8js8w-gnupg-2.4.1/bin/gpg-connect-agent --quiet updatestartuptty /bye >/dev/null 2>&1''
debug3: command returned status 0
debug3: /etc/ssh/ssh_config line 5: matched 'exec "/nix/store/q1c2flcykgr4wwg5a6h450hxbk4ch589-bash-5.2-p15/bin/bash -c '/nix/store/c015armnkhr6v18za0r"'
debug2: match found
debug1: /etc/ssh/ssh_config line 9: Applying options for *
debug3: expanded UserKnownHostsFile '~/.ssh/known_hosts' -> '/home/binary-eater/.ssh/known_hosts'
debug3: expanded UserKnownHostsFile '~/.ssh/known_hosts2' -> '/home/binary-eater/.ssh/known_hosts2'
debug2: resolving "github.com" port 22
debug3: resolve_host: lookup github.com:22
debug3: channel_clear_timeouts: clearing
debug3: ssh_connect_direct: entering
debug1: Connecting to github.com [192.30.255.113] port 22.
debug3: set_sock_tos: set socket 3 IP_TOS 0x48
Fixes: e6f5b934fb ("b43: Add QOS support")
Signed-off-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231231050300.122806-5-sergeantsagara@protonmail.com
rtl8xxxu_set_basic_rates() sets the wrong initial RTS rate. It sets the
next higher rate than the one it should set, e.g. 36M instead of 24M.
The while loop was supposed to find the index of the most significant
bit which is 1, but it was copied incorrectly from the vendor driver.
Use __fls() instead.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/761e6836-6cd6-4930-91b6-0446834655c5@gmail.com
Some devices, like the Comfast CF-826F, use LED1, which already works.
Others, like Asus USB-N13 C1, use LED0, which doesn't work correctly.
Write the right values to the LED control registers to make LED0 work
as well.
This is unfortunately tested only with the Comfast CF-826F.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/7a2c3158-3a45-4466-b11e-fc09802b20e2@gmail.com
When the driver is used for concurrent mode, both virtual interfaces can
be set to station or AP mode, though only one can be in AP mode at the
same time.
In order to keep the code simple, use only hw port 0 for AP mode. When
an interface is added in AP mode which would be assigned to port 1, use
a switch_port function to transparently swap the mapping between virtual
interface and hw port.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-21-martin.kaistra@linutronix.de
Add a custom function for allocating entries in the sec cam. This allows
us to store multiple keys with the same keyidx.
The maximum number of sec cam entries for 8188f is 16 according to the
vendor driver. Add the number to rtl8xxxu_fileops, so that other chips
which might support more entries, can set a different number there.
Set the bssid as mac address for group keys instead of just using the
ethernet broadcast address and use BIT(6) in the sec cam ctrl entry
for differentiating them from pairwise keys like in the vendor driver.
Add the TXDESC_EN_DESC_ID bit and the hw_key_idx to tx
broadcast/multicast packets in AP mode.
Finally, allow the usage of rtl8xxxu_set_key() for AP mode.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-20-martin.kaistra@linutronix.de
Until now, the driver only assigned a dedicated macid for connections
made in AP mode, in STA mode the return value of rtl8xxxu_get_macid()
was simply 0.
To differentiate between port 0 and 1, when both are in STA mode,
allocate a second macid (with value 1) and set sta_info->macid according
to the used port_num in rtl8xxxu_sta_add().
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-18-martin.kaistra@linutronix.de
Add a custom struct to store in vif->drv_priv with a reference to
port_num and fill it when a new interface is added. Choose a free
port_num for the newly added interface.
As we only want to support AP mode/sending beacons on port 0, only change
the beacon settings if a new interface is actually assigned to port 0.
Call set_linktype() and set_mac() with the appropriate port_num.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-15-martin.kaistra@linutronix.de
There are multiple places in the code where the current connection
status of wifi is checked. The driver will support two interfaces soon
and either one of them (or both) could be connected.
Convert all uses of (vif && vif->cfg.assoc) to a new helper
function rtl8xxxu_is_assoc() which checks both interfaces.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-7-martin.kaistra@linutronix.de
To prepare for concurrent mode, enhance rtl8xxxu_set_mac() to write the
mac address of the respective interface to REG_MACID or REG_MACID1.
Remove the call to rtl8xxxu_set_mac() from the init function as we set
it in rtl8xxxu_add_interface() later anyway.
Until rtl8xxxu_add_interface() can handle both interfaces, call
rtl8xxxu_set_mac() with port_num = 0.
Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231222101442.626837-6-martin.kaistra@linutronix.de
