DaVinci device-tree updates for v4.18
* DA850 EVM gains USB support, SD card write-protect, card detect
and some clean-up
* Support for gpio-ranges makes using gpios from DT much easier
* Lego EV3 clean-up
* tag 'davinci-for-v4.18/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850-evm: add WP and CD to MMC
ARM: dts: da850-lego-ev3: remove unnecessary gpio-keys properties
ARM: dts: da850-evm: use phandles to extend nodes
ARM: dts: da850: use gpio-ranges
ARM: dts: da850-evm: Enable usb_phy, usb0 and usb1
Signed-off-by: Olof Johansson <olof@lixom.net>
Amlogic 64-bit DT updates for v4.18
- AXG family: support more peripherals (wifi, eMMC, clocks)
- GX family: add/enable USB host support
* tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
dt-bindings: arm: amlogic: add support for the Tronsmart MXIII Plus
dt-bindings: arm: amlogic: add support for the Meson8m2 SoC
ARM64: dts: meson-axg: enable AP6255 wifi module
ARM64: dts: meson: add MMC resets
ARM64: dts: meson-axg: add an 32K alt aoclk
ARM64: dts: meson-axg: add tdm pins
ARM64: dts: meson-axg: add GPIO interrupt controller support
ARM64: dts: meson-axg: enable the eMMC controller
ARM64: dts: meson-gx: fix gxl clock controller compatible
ARM64: dts: meson-axg: use hhi syscon for the clock controller
ARM64: dts: meson-gx: sysctrl is the parent of the clock controller
dt-bindings: clock: meson: update documentation with hhi syscon
Signed-off-by: Olof Johansson <olof@lixom.net>
Amlogic 32-bit DT updates for v4.18
- add support for meson8m2 SoC
- new board: Tronsmart MXIII Plus using meson8m2 SoC
- odroid-c1: add IR
* tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson8m2: add support for the Tronsmart MXIII Plus
ARM: dts: meson8: add the uart_A pins
ARM: dts: meson: add support for the Meson8m2 SoC
ARM: meson: add support for the Meson8m2 SoCs
ARM: dts: meson8b: odroid-c1: enable the IR receiver
ARM: dts: meson8b: odroid-c1: sort nodes alphabetically
ARM: dts: meson8b: add the cortex-a5-pmu compatible PMU
ARM: dts: meson8: add the cortex-a9-pmu compatible PMU
Signed-off-by: Olof Johansson <olof@lixom.net>
ARM64: DT: Hisilicon SoC DT updates for 4.18v2
- Add mailbox, stub clock, CPU frequency scaling, thermal cooling
management and pcie msi interruption support for hi3660
- Add LPC support for hip06 and hip07
- Add PCIe, usb and emmc support for hi3798cv200
* tag 'hisi-arm64-dt-for-4.18v2' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hi3798cv200: enable emmc support for poplar board
arm64: dts: hi3798cv200: enable usb2 support for poplar board
arm64: dts: hi3798cv200: enable PCIe support for poplar board
arm64: dts: hisi: Enable Hisi LPC node for hip07
arm64: dts: hisi: Enable Hisi LPC node for hip06
arm64: dts: hi3660: Add pcie msi interrupt attribute
arm64: dts: hi3660: Add thermal cooling management
arm64: dts: hi3660: Add CPU frequency scaling support
arm64: dts: hi3660: Add stub clock node
arm64: dts: hi3660: Add mailbox node
Signed-off-by: Olof Johansson <olof@lixom.net>
The legacy mode uses the write protect and card detect but DT does not.
This patch enables Write-Protect and Card-Detect pins for the MMC card, and
the gpio-ranges property sets the gpio pinmuxing for those respective pins.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
All iommus got their clocks added and rk3399 got support for its
usb3-phy otg-port and better ajustment for the cpll child clocks.
On the board side, all rk3399 got their typec phys enabled - which
is needed for better usb support, the sapphire board got some more
properties moved to the excavator baseboard where they really belong,
kevin got a fix to use a real devicetree compatible and puma-haikou
got its hdmi port enabled.
* tag 'v4.18-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: enable hdmi on rk3399-puma-haikou
arm64: dts: rockchip: use canonical compatible for touchpad/touchscreen on gru-kevin
arm64: dts: rockchip: add clocks in iommu nodes
arm64: dts: rockchip: add usb3-phy otg-port support for rk3399
arm64: dts: rockchip: remove PCIe assigned-clocks in excavator baseboard
arm64: dts: rockchip: move rk3399-sapphire PCIe to excavator baseboard
arm64: dts: rockchip: assign clock rate for cpll child clocks on rk3399
arm64: dts: rockchip: enable typec-phy0 for rk3399-puma-haikou
arm64: dts: rockchip: enable typec-phy1 for rk3399-puma
arm64: dts: rockchip: enable typec-phy for rk3399-firefly
arm64: dts: rockchip: enable typec-phy for rk3399-sapphire
Signed-off-by: Olof Johansson <olof@lixom.net>
Fixed pin numbers for uart4 on rk3288, iommu clocks and small changes
over multiple boards like default serial setting for rk3288-tinker,
output selection for the dp83867 on the phycore-som and the newly
added pwm-backlight delay properties for veyron boards.
* tag 'v4.18-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: default serial for rk3288 Tinker Board
ARM: dts: rockchip: set PWM delay backlight settings for Minnie
ARM: dts: rockchip: set PWM delay backlight settings for Veyron
ARM: dts: rockchip: add clocks in iommu nodes
ARM: dts: rockchip: Add dp83867 CLK_OUT muxing on rk3288-phycore-som
ARM: dts: rockchip: fix uart4 pin-numbers for rk3288
Signed-off-by: Olof Johansson <olof@lixom.net>
ARMv8 Juno/Vexpress updates/cleanups for v4.18
1. Add the missing connections to the STM output port as all endpoint
connections must be bidirectional.
2. Replace all the custom OF graph endpoint node names with the standard
'endpoint'
3. Cleanup to replace all underscores('_') with hyphens('-') in the
device node names
4. Syntactic restructuring of motherboard include file so that it can be
included at the top of any other DTS file as it should be rather than
existing include in the middle of the file at a specific location
* tag 'juno-updates-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno/rtsm: re-structure motherboard includes
arm64: dts: juno: replace '_' with '-' in node names
arm64: dts: juno: Fix "debounce-interval" property misspelling
arm64: dts: juno: fix OF graph endpoint node names
arm64: dts: juno: fix missing Coresight STM graph connection
Signed-off-by: Olof Johansson <olof@lixom.net>
ARMv7 Vexpress updates/cleanups for v4.18
1. Syntactic restructuring of motherboard include file so that it can be
included at the top of any other DTS file as it should be rather than
existing include in the middle of the file at a specific location
2. Use of standard GPIO controller bindings for few sysreg components
like LED, MMC Write Protect/Card Detect and Flash Write Protect
to fix some of the new DTC warnings
3. Cleanup to replace all underscores('_') with hyphens('-') in the
device node names
* tag 'vexpress-updates-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
ARM: dts: vexpress: replace '_' with '-' in node names
ARM: dts: vexpress: use standard gpio bindings for sys_{led,mci,flash}
ARM: dts: vexpress: Restructure motherboard includes
Signed-off-by: Olof Johansson <olof@lixom.net>
It adds pinctrl device pinconf@8a21000, gpio-ranges for GPIO devices,
and then enables eMMC support for Hi3798CV200 Poplar board.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
It adds combophy devices under peripheral controller and enables PCIe
support for Hi3798CV200 Poplar board.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The patch enables the HiSi LPC node for hip07, with
the IPMI child device.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The patch enables the HiSi LPC node for hip06, with
IPMI and UART child devices.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add two CPU OPP tables, one table is corresponding to one cluster,
which allow CPU frequency scaling on hi3660 platforms.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Samsung DTS ARM changes for v4.18
1. Add support for USB OTG port on Origen board.
2. Allow earlycon on Rinato board.
3. Cleanup from obsolete properties.
4. Fix DTC warnings.
5. Remove Exynos5440 entirely.
6. Add mem-2-mem Scaler devices.
* tag 'samsung-dt-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Update x and y properties for mms114 touchscreen
ARM: dts: exynos: Add mem-2-mem Scaler devices
ARM: dts: s3c64xx: Remove skeleton.dtsi and fix DTC warnings for /memory
ARM: dts: s3c24xx: Fix unnecessary address/size cells DTC warnings
ARM: dts: s3c24xx: Remove skeleton.dtsi and fix DTC warning for /memory
ARM: dts: exynos/s3c: Remove leading 0x and 0s from bindings notation
ARM: dts: exynos: Remove Exynos5440
ARM: dts: exynos: Remove unnecessary address/size properties in dp-controller of Exynos5
ARM: dts: exynos: Bring order in fixed-regulators naming in Midas boards
ARM: dts: exynos: Remove regulators node container in Origen and N710x
ARM: dts: exynos: Remove unnecessary address/size properties in Origen
ARM: dts: exynos: Remove unnecessary address/size properties in Midas boards
ARM: dts: exynos: Fix invalid node referenced by i2c20 alias in Peach Pit and Pi
ARM: dts: exynos: Move syscon poweroff and restart nodes under the PMU
ARM: dts: exynos: Remove obsolete clock properties from power domains
ARM: dts: exynos: Add serial path for Rinato board to get earlycon support
ARM: dts: exynos: Add support for USB OTG port on Origen board
Signed-off-by: Olof Johansson <olof@lixom.net>
DTS updates for the Gemini:
- Set righ flashes on DNS-313
- Activate ATA1 on NAS4220B
- Set right harddisk triggers on the D-Link devices
- Fix all DTC warnings
* tag 'gemini-dts-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: Fix DTC warnings
ARM: dts: Add second ATA to NAS4220B
ARM: dts: Fix bootargs for Gemini D-Link devices
ARM: dts: Fix the DNS-313 flash compatible
ARM: dts: Set DNS-685 LEDs to use better triggers
ARM: dtd: Set DNS-313 LEDs to use better triggers
ARM: dts: gemini: Fix "debounce-interval" property misspelling
Signed-off-by: Olof Johansson <olof@lixom.net>
This pull request contains Broadcom ARM-based SoC Device Tree changes
for 4.18, please pull the following:
- Stefan provides updates to the BCM2835 RNG Device Tree binding and
Device Tree node by adding its missing interrupt line.
- Rafal switches the Luxul XWC-1000 and the D-Link DIR-885L to the new
partitions syntax which allows specifying a partition parser
- Rafal also updates a bunch of BCM5301X Device Tree source files to a
more standard SPDX tag and dual GPL 2.0 and MIT. This is a follow-up
to this discussion with Greg:
https://lkml.org/lkml/2018/4/28/179
- Dan adds support for two Luxul devices: XAP-1610 (based on BCM47094)
and XWR-3150 V1 (similar to XWR-3100)
- Stefan provides a set of updates to the BCM283x Device Tree sources to
support the Raspberry Pi 3 B+ for both the ARM and ARM64 kernels. He
adds the required nodes for the LAN7515 USB Ethernet, Cypress CYW43455
BT/WiFi combo chip. Stefan also provides a few fixes for the PWM pin
assignment for RPi 3B and Zero/Zero W. Finally, Stefan adds the
missing GPIOs for controlling additional peripherals now that support
for the RPi 3 GPIO expander has landed
* tag 'arm-soc/for-4.18/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM5301X: Switch D-Link DIR-885L to the new partitions syntax
ARM: dts: BCM5301X: Relicense Asus RT-AC87U file to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Add DT for Luxul XAP-1610
ARM: dts: BCM5301X: Add DT for Luxul XWR-3150 V1
ARM: dts: BCM5301X: Relicense Buffalo files to the GPL 2.0+ / MIT
ARM: dts: BCM5301X: Relicense most DTS files to the GPL 2.0+ / MIT
arm64: dts: broadcom: Add reference to Raspberry Pi 3 B+
ARM: dts: bcm2837: Add Raspberry Pi 3 B+
dt-bindings: bcm: Add Raspberry Pi 3 B+
ARM: dts: bcm2837: Add missing GPIOs of Expander
ARM: dts: bcm283x: Fix PWM pin assignment
ARM: dts: BCM5301X: Switch Luxul XWC-1000 to the new fixed partitions syntax
ARM: bcm283x: Add missing interrupt for RNG block
dt-binding: rng: Add interrupt property for BCM2835
Signed-off-by: Olof Johansson <olof@lixom.net>
Device tree changes for omap variants for SDHCI
This series adds the devicetree configuration needed for pinctrl on
dra7 variants to use the SDHCI SDIO driver instead of mmc-omap-hs
driver. To use SDHCI, both the pins and the iodelay needs to be
configured.
This series is based on the related SDHCI drivers changes on a branch
set up by Ulf.
* tag 'omap-for-v4.18/dt-sdhci-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (28 commits)
Documentation: ARM: Add new MMC requirements for DRA7/K2G
ARM: dts: dra7: Add high speed modes capability to MMC1/MMC2 dt node
ARM: dts: dra7: Use sdhci-omap programming model
ARM: dts: dra76-evm: Add wilink8 wlan support
ARM: dts: dra7-evm: Add wilink8 wlan support
ARM: dts: dra7-evm: Model EVM_3V6 regulator
ARM: dts: dra72-evm-common: Add wilink8 wlan support
ARM: dts: am57xx-beagle-x15/am57xx-idk: Fix pinctrl-names
ARM: dts: am574x-idk: Add pinmux configuration for MMC
ARM: dts: dra71-evm: Use pinctrl group from dra7-mmc-iodelay.dtsi to select pulldown
ARM: dts: am57xx-idk: Use pinctrl group from dra7-mmc-iodelay.dtsi to select pulldown
ARM: dts: dra7-mmc-iodelay: Add a new pinctrl group for clk line without pullup
ARM: dts: dra71-evm: Add "vqmmc-supply" property for mmc2
ARM: dts: dra72-evm-common: Remove mmc specific pinmux
mmc: sdhci-omap: Get IODelay values for 3.3v DDR mode
dt-bindings: sdhci-omap: Add pinctrl bindings
mmc: sdhci-omap: Add sdhci_omap specific ops for enable_sdio_irq
mmc: sdhci-omap: Add support for MMC/SD controller in k2g SoC
dt-bindings: sdhci-omap: Add K2G specific binding
mmc: sdhci-omap: Workaround for Errata i834
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Since commit 83a86fbb5b ("irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE")
kernel is complaining about the IRQ_TYPE_NONE usage which shouldn't
be used.
Use IRQ_TYPE_LEVEL_HIGH instead.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Since commit 83a86fbb5b ("irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE")
kernel is complaining about the IRQ_TYPE_NONE usage which shouldn't
be used.
Use IRQ_TYPE_LEVEL_HIGH instead.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Since commit 83a86fbb5b ("irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE")
kernel is complaining about the IRQ_TYPE_NONE usage which shouldn't
be used.
Use IRQ_TYPE_LEVEL_HIGH instead.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Since commit 83a86fbb5b ("irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE")
kernel is complaining about the IRQ_TYPE_NONE usage which shouldn't
be used.
Use IRQ_TYPE_LEVEL_HIGH instead.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Since commit 83a86fbb5b ("irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE")
kernel is complaining about the IRQ_TYPE_NONE usage which shouldn't
be used.
Use IRQ_TYPE_LEVEL_HIGH instead.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
This removes the #address-cells and #size-cells properties from the
gpio-keys node in the da850-lego-ev3 device tree. These properties are
not needed since the child nodes don't have a reg property.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
ARM: DTS: Add DCAN support for Keystone K2G
* tag 'keystone_dts_for_4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: dts: k2g-evm: Add DCAN dt nodes
Signed-off-by: Olof Johansson <olof@lixom.net>
Device tree changes for omap variants for v4.18 merge window
This series adds support for am335x-pockebeagle and also add missing
pinctrl configuration for am335x evm and beagle bone variants.
There are also changes to add missing omap3 oscillator clocks for audio,
and fixes am437x tps65218 irq type used for various board specific
files.
There are also few minor fixes included that are not urgent. The
fixes for n8x0 audio also depend on driver changes, and the hp t410
mmc card detect mux typo is harmless.
* tag 'omap-for-v4.18/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: correct invalid I/O definition for MMC/SD card detect on T410
ARM: dts: omap2420-n810: Correct the audio codec (tlv320aic33) node
ARM: dts: omap2420-n810: Enable McBSP2 for audio
ARM: dts: am437x-sk-evm: Correct tps65218 irq type
ARM: dts: am437x-epos-evm: Correct tps65218 irq type
ARM: dts: am437x-cm-t43: Correct tps65218 irq type
ARM: dts: am437x-gp-evm: Correct tps65218 irq type
ARM: dts: Add am335x-pocketbeagle
ARM: dts: am33xx: Add pinmux data for mmc1 in am335x-evm, evmsk and beaglebone
ARM: dts: omap3-gta04: Add fixed 26MHz clock as fck for twl
ARM: dts: omap3-pandora: Add fixed 26MHz clock as fck for twl
ARM: dts: omap3-beagle-xm: Add fixed 26MHz clock as fck for twl
ARM: dts: logicpd-som-lv: Enable Touchscreen controller
Signed-off-by: Olof Johansson <olof@lixom.net>
STM32 DT updates for v4.18, round 1
Highlights:
-----------
-MCU platforms updates:
-Update pwm-cells for stm32h743
-Add I2C support on stm32f7xx-disco boards and
on stm32h743i-eval board
-Add new stm32f469 dtsi file
-Add display support on stm32f469-disco (LTDC/DSI)
+ pannel orisetech (otm8009a)
-MPU STM32MP157 platform updates:
-Fix DTC (W=12) warnings
-Fix IRQ type definition for usart
-Add QSPI & NOR flash support on EV1 board
-Add CEC support
-Add USB host
-Add USBPHYC support and enable it on EV1 board
-Add LTDC and DSI support
-Add I2C support and enable it on ED1 and EV1 boards
-Add CRC support
-Add RNG support
-Add CRYP support
-Add DAC support
-Add LPTIMER support
-Add VREFBUFF support
-Add timers supports and enable timer trigger 6 on ED1 board
-Add MDMA, DMA and DMAMUX support and enable it
-Enable clock driver
* tag 'stm32-dt-for-v4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (42 commits)
ARM: dts: stm32: update pwm-cells for LPTimer on stm32h743
ARM: dts: stm32: Add I2C1 support for stm32h743i-eval Board
ARM: dts: stm32: Add I2C support for STM32H743 SoC
ARM: dts: stm32: Add I2C1 support for stm32f746-disco Board
ARM: dts: stm32: Add I2C1 support for stm32f769-disco Board
ARM: dts: stm32: Append additional I2Cs for STM32F746 SoC
ARM: dts: stm32: Add display support on stm32f469-disco
ARM: dts: stm32: Add new stm32f469 dtsi file with mipi dsi
ARM: dts: stm32: Use gpio bindings in stm32f469-disco
ARM: dts: stm32: Fix IRQ_TYPE_NONE warnings on stm32mp157c
ARM: dts: stm32: Fix DTC warnings for stm32mp157
ARM: dts: stm32: add flash nor support on stm32mp157c eval board
ARM: dts: stm32: add qspi support for stm32mp157c
ARM: dts: stm32: add cec support on stm32mp157c-ev1
ARM: dts: stm32: add cec pins to stm32mp157c
ARM: dts: stm32: add cec support on stm32mp157c
ARM: dts: stm32: add USB Host (USBH) support to stm32mp157c
ARM: dts: stm32: enable USBPHYC on stm32mp157c-ev1
ARM: dts: stm32: add supplies to usbphyc ports on stm32mp157c-ed1
ARM: dts: stm32: add USBPHYC support to stm32mp157c
...
Signed-off-by: Olof Johansson <olof@lixom.net>
This:
- Corrects the debounce interval on some nodes
- Drops the U8540/U9540 device trees
* tag 'ux500-dts-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: ux500: Drop the U8540 device trees
ARM: dts: Ux500: Fix "debounce-interval" property misspelling
Signed-off-by: Olof Johansson <olof@lixom.net>
Pull x86/pti updates from Thomas Gleixner:
"A mixed bag of fixes and updates for the ghosts which are hunting us.
The scheduler fixes have been pulled into that branch to avoid
conflicts.
- A set of fixes to address a khread_parkme() race which caused lost
wakeups and loss of state.
- A deadlock fix for stop_machine() solved by moving the wakeups
outside of the stopper_lock held region.
- A set of Spectre V1 array access restrictions. The possible
problematic spots were discuvered by Dan Carpenters new checks in
smatch.
- Removal of an unused file which was forgotten when the rest of that
functionality was removed"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vdso: Remove unused file
perf/x86/cstate: Fix possible Spectre-v1 indexing for pkg_msr
perf/x86/msr: Fix possible Spectre-v1 indexing in the MSR driver
perf/x86: Fix possible Spectre-v1 indexing for x86_pmu::event_map()
perf/x86: Fix possible Spectre-v1 indexing for hw_perf_event cache_*
perf/core: Fix possible Spectre-v1 indexing for ->aux_pages[]
sched/autogroup: Fix possible Spectre-v1 indexing for sched_prio_to_weight[]
sched/core: Fix possible Spectre-v1 indexing for sched_prio_to_weight[]
sched/core: Introduce set_special_state()
kthread, sched/wait: Fix kthread_parkme() completion issue
kthread, sched/wait: Fix kthread_parkme() wait-loop
sched/fair: Fix the update of blocked load when newly idle
stop_machine, sched: Fix migrate_swap() vs. active_balance() deadlock
Pull scheduler fix from Thomas Gleixner:
"Revert the new NUMA aware placement approach which turned out to
create more problems than it solved"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "sched/numa: Delay retrying placement for automatic NUMA balance after wake_affine()"
Pull perf tooling fixes from Thomas Gleixner:
"Another small set of perf tooling fixes and updates:
- Revert "perf pmu: Fix pmu events parsing rule", as it broke Intel
PT event description parsing (Arnaldo Carvalho de Melo)
- Sync x86's cpufeatures.h and kvm UAPI headers with the kernel
sources, suppressing the ABI drift warnings (Arnaldo Carvalho de
Melo)
- Remove duplicated entry for westmereep-dp in Intel's mapfile.csv
(William Cohen)
- Fix typo in 'perf bench numa' options description (Yisheng Xie)"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "perf pmu: Fix pmu events parsing rule"
tools headers kvm: Sync ARM UAPI headers with the kernel sources
tools headers kvm: Sync uapi/linux/kvm.h with the kernel sources
tools headers: Sync x86 cpufeatures.h with the kernel sources
perf vendor events intel: Remove duplicated entry for westmereep-dp in mapfile.csv
perf bench numa: Fix typo in options
Pull dma-mapping fix from Christoph Hellwig:
"Just one little fix from Jean to avoid a harmless but very annoying
warning, especially for the drm code"
* tag 'dma-mapping-4.17-5' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: silent unwanted warning "buffer is full"
The mms114 binding [1] specifies that the 'x' and 'y' should be
called respectively 'touchscreen-size-x' and 'touchscreen-size-y'
in coherence with the touchscreen [2] binding.
Update the mms114 node for trats2 and trats dts according to the
binding.
[1] Documentation/devicetree/bindings/input/touchscreen/mms114.txt
[2] Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
There are 3 scaler devices in Exynos5420 SoCs, all are a part of MSCL
power domain. MSCL power domain and SYSMMU controllers (two per each
scaler device) have been already added to exynos5420.dtsi earlier,
so bind them to newly added devices.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Pull cifs fixes from Steve French:
"Some small SMB3 fixes for 4.17-rc5, some for stable"
* tag '4.17-rc4-SMB3-Fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: directory sync should not return an error
cifs: smb2ops: Fix listxattr() when there are no EAs
cifs: smbd: Enable signing with smbdirect
cifs: Allocate validate negotiation request through kmalloc
Pull thermal fixes from Zhang Rui:
- fix NULL pointer dereference on module load/probe for int3403_thermal
driver
- fix an emergency shutdown issue on exynos thermal driver
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
thermal: exynos: Propagate error value from tmu_read()
thermal: exynos: Reading temperature makes sense only when TMU is turned on
thermal: int3403_thermal: Fix NULL pointer deref on module load / probe
Pull block fixes from Jens Axboe:
"Just a few NVMe fixes this round - one fixing a use-after-free, one
fixes the return value after controller reset, and the last one fixes
an issue where some drives will spuriously EIO. We should get these
into 4.17"
* tag 'for-linus-20180511' of git://git.kernel.dk/linux-block:
nvme: add quirk to force medium priority for SQ creation
nvme: Fix sync controller reset return
nvme: fix use-after-free in nvme_free_ns_head
The DTC was warning a lot about unit names etc, I think I fixed
them all. Stopping to include skeleton.dtsi fixes the last one.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The NAS4220B has the second ATA interface up and running.
Activate it in the device tree.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
