Jacob Keller says:
====================
ice: Introduce ETH56G PHY model for E825C products
E825C products have a different PHY model than E822, E823 and E810 products.
This PHY is ETH56G and its support is necessary to have functional PTP stack
for E825C products.
This series refactors the ice driver to add support for the new PHY model.
Karol introduces the ice_ptp_hw structure. This is used to replace some
hard-coded values relating to the PHY quad and port numbers, as well as to
hold the phy_model type.
Jacob refactors the driver code that converts between the ice_ptp_tmr_cmd
enumeration and hardware register values to better re-use logic and reduce
duplication when introducing another PHY type.
Sergey introduces functions to help enable and disable the Tx timestamp
interrupts. This makes the ice_ptp.c code more generic and encapsulates the
PHY specifics into ice_ptp_hw.c
Karol introduces helper functions to clear the valid bits for Tx and Rx
timestamps. This enables informing hardware to discard stale timestamps
after performing clock operations.
Sergey moves the Clock Generation Unit (CGU) logic out of the E822 specific
area of the ice_ptp_hw.c file as it will be re-used for other device PHY
models.
Jacob introduces a helper function for obtaining the base increment values,
moving this logic out of ice_ptp.c and into the ice_ptp_hw.c file to better
encapsulate hardware differences.
Sergey builds on these refactors to introduce the new ETH56G PHY model used
by the E825C products. This includes introducing the required helpers,
constants, and PHY model checks.
Karol simplifies the CGU logic by using anonymous structures, dropping an
unnecessary ".field" name for accessing the CGU data.
Michal Michalik updates the CGU logic to support the E825C hardware,
ensuring that the clock generation is configured properly.
Grzegorz Nitka adds support to read the NAC topology data from the device.
This is in preparation for supporting devices which combine two NACs
together, connecting all ports to the same clock source. This enables the
driver to determine if its operating on such a device, or if its operating
on the standard 1-NAC configuration.
Grzsecgorz Nitka adjusts the PTP initialization to prepare for the 2x50G
E825C devices, introducing special mapping for the PHY ports to prepare for
support of the 2-NAC devices.
With this, the ice driver is capable of handling PTP for the single-NAC
E825C devices. Complete support for the 2-NAC devices requirs some work on
how the ports connect to the clock owner. During review of this work, it
was pointed out that our existing use of auxiliary bus is disliked, and
Jiri requested that we change it. We are currently working on developing a
replacement solution for the auxiliary bus implementation and have dropped
the relevant changes out of this series. A future series will refactor the
port to clock connection, at which time we will finish the support for
2-NAC E825C devices.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
====================
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-0-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
>From FW/HW perspective, 2 port topology in E825C devices requires
merging of 2 port mapping internally and breakout mapping externally.
As a consequence, it requires different port numbering from PTP code
perspective.
For that topology, pf_id can not be used to index PTP ports. Even if
the 2nd port is identified as port with pf_id = 1, all PHY operations
need to be performed as it was port 2. Thus, special mapping is needed
for the 2nd port.
This change adds detection of 2x50G topology and applies 'custom'
mapping on the 2nd port.
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-11-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Multiple places in the driver code need to convert enum ice_ptp_tmr_cmd
values into register bits for both the main timer and the PHY port
timers. The main MAC register has one bit scheme for timer commands,
while the PHY commands use a different scheme.
The E810 and E830 devices use the same scheme for port commands as used
for the main timer. However, E822 and ETH56G hardware has a separate
scheme used by the PHY.
Introduce helper functions to convert the timer command enumeration into
the register values, reducing some code duplication, and making it
easier to later refactor the individual port write commands.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-2-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to what is done in other 'sysctl' pages: it looks clearer from a
readability perspective.
This might cause troubles in the short/mid-term with the backports, but
by not putting new entries at the end, this can help to reduce conflicts
in case of backports in the long term. We don't change the information
here too often, so it looks OK to do that.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240530-upstream-net-20240520-mptcp-doc-v3-2-e94cdd9f2673@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: phylink: rearrange ovr_an_inband support
This series addresses the use of the ovr_an_inband flag, which is used
by two drivers to indicate to phylink that they wish to use inband mode
without firmware specifying inband mode.
The issue with ovr_an_inband is that it overrides not only PHY mode,
but also fixed-link mode. Both of the drivers that set this flag
contain code to detect when fixed-link mode will be used, and then
either avoid setting it or explicitly clear the flag. This is
wasteful when phylink already knows this.
Therefore, the approach taken in this patch set is to replace the
ovr_an_inband flag with a default_an_inband flag which means that
phylink defaults to MLO_AN_INBAND instead of MLO_AN_PHY, and will
allow that default to be overriden if firmware specifies a fixed-link.
This allows users of ovr_an_inband to be simplified.
What's more is this requires minimal changes in phylink to allow this
new mode of operation.
This series changes phylink, and also updates the two drivers
(fman_memac and stmmac), and then removes the unnecessary complexity
from the drivers.
This series may depend on the stmmac cleanup series I've posted
earlier - this is something I have not checked, but I currently have
these patches on top of that series.
====================
Link: https://lore.kernel.org/r/ZlctinnTT8Xhemsm@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Of the two users of phylink_config->ovr_an_inband, both manually check
for a fixed link before setting this flag (or clearing it if they find
a fixed link.) This is unnecessary complication.
Test ovr_an_inband before checking for the fixed-link properties, which
will allow ovr_an_inband to be overriden by a fixed link specification.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/E1sCJMq-00Ecqv-P8@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Of the two users of phylink_config->ovr_an_inband, both manually check
for a fixed link before setting this flag (or clearing it if they find
a fixed link.) This is unnecessary complication.
Rearrange phylink_parse_mode() a little so we can change how
phylink_config->ovr_an_inband works. This will allow the flag to be
tested before checking for the fixed link properties in the next patch.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/E1sCJMl-00Ecqp-K0@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: cleanups
This series removes various redundant items in the stmmac driver:
- the unused TBI and RTBI PCS flags
- the NULL pointer initialisations for PCS methods in dwxgmac2
- the stmmac_pcs_rane() method which is never called, and it's
associated implementations
- the redundant netif_carrier_off()s
Finally, it replaces asm/io.h with the preferred linux/io.h.
====================
Link: https://lore.kernel.org/r/Zlbp7xdUZAXblOZJ@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is incorrect to call netif_carrier_off(), or in fact any driver
teardown, before unregister_netdev() has been called.
unregister_netdev() unpublishes the network device from userspace, and
takes the interface down if it was up prior to returning. Therefore,
once the call has returned, we are guaranteed that .ndo_stop() will
have been called for an interface that was up. Phylink will take the
carrier down via phylink_stop(), making any manipulation of the carrier
in the remove path unnecessary.
In the stmmac_release() path, the netif_carrier_off() call follows the
call to phylink_stop(), so this call is redundant.
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/E1sCErZ-00EOPx-PF@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
First of all the flags are never set by any of the driver parts. If nobody
have them set then the respective statements will always have the same
result. Thus the statements can be simplified or even dropped with no risk
to break things.
Secondly shall any of the TBI or RTBI flag is set the MDIO-bus
registration will be bypassed. Why? It really seems weird. It's perfectly
fine to have a TBI/RTBI-capable PHY configured over the MDIO bus
interface.
Based on the notes above the TBI/RTBI PCS flags can be freely dropped thus
simplifying the driver code.
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/E1sCErK-00EOPf-EP@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A comment in define_trace.h clearly states:
TRACE_INCLUDE_PATH if the path is something other than core kernel
vvvvvvvvvvvvvv
include/trace then this macro can define the path to use. Note, the path
is relative to define_trace.h, not the file including it. Full path names
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
for out of tree modules must be used.
fjes uses path relative to itself. Which (somehow) works most of
the time. Except when the kernel tree is "nested" in another
kernel tree, and ../drivers/net/fjes actually exists. In which
case build will use the header file from the wrong directory.
I've been trying to figure out why net NIPA builder is constantly
failing for the last 5 days, with:
include/trace/../../../drivers/net/fjes/fjes_trace.h:88:17: error: ‘__assign_str’ undeclared (first use in this function)
88 | __assign_str(err, err);
| ^~~~~~~~~~~~
when the line in the tree clearly has only one "err". NIPA does
indeed have "nested" trees, because it uses git work-trees and
the tree on the "outside" is not very up to date.
Link: https://lore.kernel.org/r/20240529023322.3467755-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recovery from broken states can be hard. If the LIF reset in
the fw_down path didn't work because the PCI link was broken,
the FW won't be in the right state for proper restart. We can
fire another LIF reset in the fw_up path to be sure things
are clean on restart.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240529000259.25775-3-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Each object file contains information about which module it gets linked
into, so linking the same file into multiple modules now causes a warning:
scripts/Makefile.build:254: drivers/net/ethernet/hisilicon/hns3/Makefile: hns3_common/hclge_comm_cmd.o is added to multiple modules: hclge hclgevf
scripts/Makefile.build:254: drivers/net/ethernet/hisilicon/hns3/Makefile: hns3_common/hclge_comm_rss.o is added to multiple modules: hclge hclgevf
scripts/Makefile.build:254: drivers/net/ethernet/hisilicon/hns3/Makefile: hns3_common/hclge_comm_tqp_stats.o is added to multiple modules: hclge hclgevf
Change the way that hns3 is built by moving the three common files into a
separate module with exported symbols instead.
Fixes: 5f20be4e90 ("net: hns3: refactor hns3 makefile to support hns3_common module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528161603.2443125-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Each object file contains information about which module it gets linked
into, so linking the same file into multiple modules now causes a warning:
scripts/Makefile.build:254: drivers/net/ethernet/marvell/octeontx2/nic/Makefile: otx2_devlink.o is added to multiple modules: rvu_nicpf rvu_nicvf
Change the way that octeontx2 ethernet is built by moving the common
file into a separate module with exported symbols instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240528152527.2148092-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Joe Damato says:
====================
mlx4: Add support for netdev-genl API
There are no functional changes from v5, which I mistakenly sent right
after net-next was closed (oops). This revision, however, includes
Tariq's Reviewed-by tags of the v5 in each commit message. See the
changelog below.
This series adds support to mlx4 for the netdev-genl API which makes it
much easier for users and user programs to map NAPI IDs back to
ifindexes, queues, and IRQs. This is extremely useful for a number of
use cases, including epoll-based busy poll.
In addition, this series includes a patch to generate per-queue
statistics using the netlink API, as well.
To facilitate the stats, patch 1/3 adds a field "alloc_fail" to the ring
structure. This is incremented by the driver in an appropriate place and
used in patch 3/3 as alloc_fail.
Please note: I do not have access to mlx4 hardware, but I've been
working closely with Martin Karsten from University of Waterloo (CC'd)
who has very graciously tested my patches on their mlx4 hardware (hence
his Tested-by attribution in each commit). His latest research work is
particularly interesting [1] and this series helps to support that (and
future) work.
Martin re-test v4 using Jakub's suggested tool [2] and the
stats.pkt_byte_sum and stats.qstat_by_ifindex tests passed. He also
adjusted the queue count and re-ran test to confirm it still passed even
if the queue count was modified.
[1]: https://dl.acm.org/doi/pdf/10.1145/3626780
[2]: https://lore.kernel.org/lkml/20240423175718.4ad4dc5a@kernel.org/
====================
Link: https://lore.kernel.org/r/20240528181139.515070-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
