Rather than gate the proxy paths with p->blocked_on, use p->is_blocked.
This opens up the state: '->is_blocked && !->blocked_on' for future use.
Notably, only proxy and delayed tasks can be ->on_rq && ->is_blocked, and it is
guaranteed that sched_class::pick_task() will never return a delayed task.
Therefore any task returned from pick_next_task() that has ->is_blocked set,
must be a proxy task.
Suggested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260526113322.477954312%40infradead.org
Current code will 'unconditionally' return migrate on PROXY_WAKING, even if the
task is (still) on the original CPU.
Check task_cpu(p) against p->waking_cpu, which per proxy_set_task_cpu()
preserves the original CPU the task was on. If they do not mis-match, there is
no need to go through the more expensive wakeup path.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260527082916.GP3126523%40noisy.programming.kicks-ass.net
The reason for the clause in try_to_wake_up() is, per its comment, that
find_proxy_task()'s proxy_deactivate() is not always called with a cleared
p->blocked_on.
However, that seems silly and easily cured. Make sure to always call
proxy_deactivate() with a cleared p->blocked_on such that we might remove this
clause from the common wake-up path.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260526113322.244729903%40infradead.org
Add a new is_blocked flag to the task struct. This flag is set
by try_to_block_task() and cleared by ttwu_do_wakeup() and
tracks if the task is blocked.
Traditionally this would mirror !p->on_rq, however due things
like DELAY_DEQUEUE and PROXY_EXEC, this can diverge, so its
useful to manage separately.
Additionally with this, we might be able to get rid of the
p->se.sched_delayed (ab)use in the core code (eventually).
Taken whole cloth from Peter's email:
https://lore.kernel.org/lkml/20260501132143.GC1026330@noisy.programming.kicks-ass.net/
With a few additional p->is_blocked = 0 in a few cases where
we return current if blocked_on gets zeroed or there is
no owner. This may hint that these current special cases
might be dropped eventually.
This change also helps resolve wait-queue stalls seen with
proxy-execution. See previous patch attempts for details:
https://lore.kernel.org/lkml/20260430215103.2978955-2-jstultz@google.com/
Reported-by: Vineeth Pillai <vineethrp@google.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260512025635.2840817-7-jstultz@google.com
This patch adds logic so try_to_wake_up() will notice if we are
waking a task where blocked_on == PROXY_WAKING, and if necessary
dequeue the task so the wakeup will naturally return-migrate the
donor task back to a cpu it can run on.
This helps performance as we do the dequeue and wakeup under the
locks normally taken in the try_to_wake_up() and avoids having
to do proxy_force_return() from __schedule(), which has to
re-take similar locks and then force a pick again loop.
This was split out from the larger proxy patch, and
significantly reworked.
Credits for the original patch go to:
Peter Zijlstra (Intel) <peterz@infradead.org>
Juri Lelli <juri.lelli@redhat.com>
Valentin Schneider <valentin.schneider@arm.com>
Connor O'Brien <connoro@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260512025635.2840817-6-jstultz@google.com
The DL scheduler keeps the current task in the rbtree, since
the deadline value isn't usually chagned while the task is
runnable.
This results in set_next_task() and put_prev_task() being
simpler, but unfortunately this causes complexity elsewhere.
Specifically when update_curr_dl() updates the deadline, it has
to dequeue and then enqueue the task.
From put_prev_task_dl(), we first call update_curr_dl(), and
then call enqueue_pushable_dl_task().
However, with Proxy Exec this goes awry. Since when a mutex is
released, we might wake the waiting rq->donor. This will cause
put_prev_task() to be called on the donor to take it off the
cpu for return migration.
At that point, from put_prev_task_dl() the update_curr_dl()
logic will dequeue & enqueue the task, and the enqueue function
will call enqueue_pushable_dl_task() (since the task_current()
check won't prevent it). Then back up the callstack in
put_prev_task_dl() we'll end up calling
enqueue_pushable_dl_task() again, tripping the
!RB_EMPTY_NODE(&p->pushable_dl_tasks) warning.
So to avoid this, use Peter's suggested[1] approach, and add a
dl_rq->curr pointer that is set/cleared from set_next_task()/
put_prev_task(), which effectively tracks the rq->donor. We can
then use this to avoid adding the active donor to the pushable
list from enqueue_task_dl().
[1]: https://lore.kernel.org/lkml/20260304095123.GP606826@noisy.programming.kicks-ass.net/
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260512025635.2840817-4-jstultz@google.com
Historically, the prev value from __schedule() was the rq->curr.
This prev value is passed down through numerous functions, and
used in the class scheduler implementations. The fact that
prev was on_cpu until the end of __schedule(), meant it was
stable across the rq lock drops that the class->balance()
implementations often do.
However, with proxy-exec, the prev passed to functions called
by __schedule() is rq->donor, which may not be the same as
rq->curr and may not be on_cpu, this makes the prev value
potentially unstable across rq lock drops.
A recently found issue with proxy-exec, is when we begin doing
return migration from try_to_wake_up(), its possible we may be
waking up the rq->donor. When we do this, we proxy_resched_idle()
to put_prev_set_next() setting the rq->donor to rq->idle, allowing
the rq->donor to be return migrated and allowed to run.
This however runs into trouble, as on another cpu we might be in
the middle of calling __schedule(). Conceptually the rq lock is
held for the majority of the time, but in calling prev_balance()
its possible the class->balance() handler call may briefly drop the rq lock.
This opens a window for try_to_wake_up() to wake and return migrate the
rq->donor before the class logic reacquires the rq lock.
Unfortunately prev_balance() pass in a prev argument, to which we pass
rq->donor. However this prev value can now become stale and incorrect across a
rq lock drop.
So, to correct this, rework the prev_balance() call so that it does not take a
"prev" argument.
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260512025635.2840817-2-jstultz@google.com
Vineeth found came up with a test driver that could trip up
workqueue stalls. After fixing one issue this test found,
Vineeth reported the test was still failing.
Greatly simplified, a task that tries to take a mutex already
owned by another task that is sleeping, can hit a edge case in
the mutex_lock_common() case.
If the task fails to get the lock, calls into schedule, but gets
a spurious wakeup, it will find that it is first waiter, and
go into the mutex_optimistic_spin() logic. Though before calling
mutex_optimistic_spin(), we clear task blocked_on state, since
mutex_optimistic_spin() may call schedule() if need_resched() is
set.
After mutex_optimistic_spin() fails, we set blocked_on again,
restart the main mutex loop, try to take the lock and call into
schedule_preempt_disabled().
From there, with proxy-execution, we'll see the task is
blocked_on, follow the chain, see the owner is sleeping and
dequeue the waiting task from the runqueue.
This all sounds fine and reasonable. But what I had missed is
that in mutex_optimistic_spin(), not only do we call schedule()
but we set TASK_RUNNABLE right before doing so.
This is ok for that invocation of schedule(). But when we come
back we re-set the blocked_on we had just cleared, but we do not
re-set the task state to TASK_INTERRUPTIBLE/UNINTERRUPTIBLE.
This means we have a task that is blocked_on & TASK_RUNNABLE,
so when the proxy execution code dequeues the task, we are
in trouble since future wakeups will be shortcut by the
ttwu_state_match() check.
Thus, to avoid this, after mutex_optimistic_spin(), set the task
state back when we set blocked_on.
Many many thanks again to Vineeth for his very useful testing
driver that uncovered this long hidden bug, that I hadn't
tripped in all my testing! Very impressed with the problems he's
uncovered!
Reported-by: Vineeth Pillai <vineethrp@google.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Vineeth Pillai <vineethrp@google.com>
Link: https://patch.msgid.link/20260430215103.2978955-3-jstultz@google.com
system_time_snapshot::systime provides the same information as
system_time_snapshot::real when the snapshot was taken with
ktime_get_snapshot_id(CLOCK_REALTIME).
Convert the history interpolation over to use 'systime' and 'monoraw' as
'real/raw' are going away once all users are converted.
As a side effect this is the first step to support CLOCK_AUX with
get_device_crosstime_stamp() and the history interpolation.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Tested-by: Arthur Kiyanovski <akiyano@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260529195557.024415766@kernel.org
ktime_get_snapshot() provides a snapshot of the underlying clocksource
counter value and the corresponding CLOCK_MONOTONIC_RAW, CLOCK_REALTIME and
CLOCK_BOOTTIME timestamps.
There is no usage of CLOCK_REALTIME and CLOCK_BOOTTIME at the same time and
CLOCK_BOOTTIME support was just added for the ARM64 KVM tracing mechanism,
which needs CLOCK_BOOTTIME and the underlying clocksource counter value.
ktime_get_snapshot() is also not suitable for usage with CLOCK_AUX, but
that's a prerequisite to support PTP hardware timestamping for CLOCK_AUX
steering.
As a first step, rename ktime_get_snapshot() to ktime_get_snapshot_id(),
which now takes a clockid argument to select the clock which needs to be
captured. The result is stored in system_time_snapshot::systime, which will
replace the system_time_snapshot::real/boot members once all usage sites
have been converted.
ktime_get_snapshot() is a simple wrapper which hands in CLOCK_REALTIME as
clockid argument for the conversion period. That means CLOCK_REALTIME is
now captured twice, but that redunancy is only temporary.
As all usage sites of struct system_time_snapshot has to be updated anyway,
rename the 'raw' member to 'monoraw' for clarity.
No functional change vs. current users of ktime_get_snapshot()
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Tested-by: Arthur Kiyanovski <akiyano@amazon.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260529195556.971591633@kernel.org
Replace BUG_ON(!mutex_is_locked(&event_mutex)) with
lockdep_assert_held(&event_mutex) in uprobe_buffer_enable() and
uprobe_buffer_disable().
BUG_ON() will crash the kernel. mutex_is_locked() only checks
if any task holds lock,but not the caller task. lockdep_assert_held()
also check current task for lock and no crash on true condition.
Link: https://lore.kernel.org/all/20260521192846.8306-1-yashsuthar983@gmail.com/
Signed-off-by: Yash Suthar <yashsuthar983@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Store probe entry fetch instructions in the probe_entry_arg
allocation instead of allocating a separate instruction array.
This keeps the entry fetch code tied to the entry argument lifetime while
leaving regular probe_arg instruction arrays separately allocated and
freed.
Assisted-by: Codex:GPT-5.5
Link: https://lore.kernel.org/all/20260520215817.16560-1-rosenp@gmail.com/
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Pull liveupdate fixes from Mike Rapoport:
"Two kexec handover regression fixes:
- fix order calculation for kho_unpreserve_pages() to make sure sure
that the order calculation in kho_unpreserve_pages() mathes the
order calculation in kho_preserve_pages().
- fix math in calculation of KHO_TREE_MAX_DEPTH to make it work with
16KB pages"
* tag 'liveupdate-fixes-2026-05-30' of git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux:
kho: fix order calculation for kho_unpreserve_pages()
kho: fix KHO_TREE_MAX_DEPTH for non-4KB page sizes
Fix to point the error offset correctly for eprobe argument error.
In the cleanup commit 1b8b0cd754 ("tracing/probes: Move event parameter
fetching code to common parser"), due to incorrect backward compatibility
aimed at conforming to the test specifications, the error location was set
to 0 when a non-existent formal parameter was specified for Eprobe.
However, this should be corrected in both the test and the implementation
to point correct error position.
Link: https://lore.kernel.org/all/177967567399.209006.1451571244515632097.stgit@devnote2/
Fixes: 1b8b0cd754 ("tracing/probes: Move event parameter fetching code to common parser")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
None of the calls to trace_array_printk_buf() will do anything
if we don't initialize the buffer on instance creation (unless
some other tracer called it), so do that.
Add an osnoise_print() function to facilitate adding debug prints
(without tainting).
Use trace_array_printk() instead of trace_array_printk_buf(), as we're
only writing to the main buffer (of a non-main instance) anyway -- and
trace_array_printk_buf() skips the check to make sure we're not printing
to the global instance.
Link: https://patch.msgid.link/20260511223035.1475676-1-crwood@redhat.com
Signed-off-by: Crystal Wood <crwood@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
update_tg_load_avg() is called once per leaf cfs_rq from the
__update_blocked_fair() walk that runs inside the NOHZ idle-balance
softirq, and again from update_load_avg() with UPDATE_TG. Its first
operation after the trivial early-outs is unconditionally:
now = sched_clock_cpu(cpu_of(rq_of(cfs_rq)));
if (now - cfs_rq->last_update_tg_load_avg < NSEC_PER_MSEC)
return;
Jakub ran into a system where nohz_idle_balance() was taking 75%
of a CPU (which is handling network traffic and doing many irq_exit_cpu
calls), with 35% of that CPU spent in update_load_avg, and 17% of the
CPU in sched_clock_cpu(), reading the TSC.
In a quick synthetic test, it looks like this patch reduces the
CPU use of sched_balance_update_blocked_averages by about 20%.
Switch the rate-limit to read rq_clock(rq_of(cfs_rq)) instead.
This eliminates the rdtsc, and uses a fairly fresh timestamp,
because all callers of update_tg_load_avg() and clear_tg_load_avg()
hold rq->lock and have called update_rq_clock(rq) within microseconds:
caller pre-state
__update_blocked_fair encloser did update_rq_clock(rq)
update_load_avg's three UPDATE_TG sites under rq->lock after enqueue/dequeue/update_curr
attach_/detach_entity_cfs_rq preceded by update_load_avg(...)
clear_tg_load_avg via offline path rq_clock_start_loop_update(rq) upfront
so rq->clock is fresh at every call. Since cfs_rqs are per-CPU
per-task_group, cfs_rq->last_update_tg_load_avg is always compared
against the same rq's clock; no cross-rq drift.
Signed-off-by: Rik van Riel <riel@surriel.com>
Assisted-by: Claude (Anthropic)
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://patch.msgid.link/20260527110250.6a91718d@fangorn
Commit cd959a3562 ("sched_ext: Add a DL server for sched_ext tasks")
introduced an ext_server deadline server to protect sched_ext tasks from
fair/RT starvation, mirroring the existing fair_server.
Currently, both servers reserve their 50ms/1000ms bandwidth at boot,
regardless of whether a BPF scheduler is loaded. Unused bandwidth is
still reclaimed at runtime by other classes, but the static reservation
prevents the RT class from implicitly using that headroom when one of
the two classes is guaranteed to be empty.
A sysadmin can work around this by writing
/sys/kernel/debug/sched/{fair,ext}_server/cpu*/runtime, but that
requires manual action and not all systems expose debugfs.
A better approach is to make server bandwidth reservations dynamic: only
the scheduling policy that is currently active should register its
reservation, while the inactive one should not artificially hold
capacity (keeping both reservations only when the BPF scheduler is
running in partial mode):
+---------------------------------------------+-------------+------------+
| BPF scheduler state | fair server | ext server |
+---------------------------------------------+-------------+------------+
| not loaded (default boot) | reserved | none |
| loaded full mode (!SCX_OPS_SWITCH_PARTIAL) | none | reserved |
| loaded partial mode (SCX_OPS_SWITCH_PARTIAL)| reserved | reserved |
+---------------------------------------------+-------------+------------+
To achieve this, introduce an "attached/detached" state for each
deadline server, so the kernel can decide whether a server's bandwidth
should be accounted in global bandwidth tracking.
At boot, the system starts with only the fair server contributing to
bandwidth accounting. When a BPF scheduler is enabled, the ext server is
attached and may replace or complement the fair server depending on
whether full or partial mode is used. When sched_ext is disabled, the
system restores the previous deadline bandwidth values and behavior.
The transition logic ensures that switching between scheduling modes is
consistent and reversible, without losing runtime configuration or
requiring manual intervention.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://patch.msgid.link/20260526164420.638711-2-arighi@nvidia.com
Writing runtime or period via the per-CPU dl_server debugfs files
(/sys/kernel/debug/sched/{fair,ext}_server/cpu*/{runtime,period}) on an
offline CPU can trigger two distinct kernel issues:
1) Divide-by-zero in dl_server_apply_params():
Oops: divide error: 0000 [#1] SMP NOPTI
RIP: 0010:dl_server_apply_params+0x239/0x3a0
Call Trace:
sched_server_write_common.isra.0+0x21a/0x3c0
full_proxy_write+0x78/0xd0
vfs_write+0xe7/0x6e0
Both __dl_sub() and __dl_add() divide by cpus internally, which can be
0 once the CPU has been removed from any active root-domain span (this
has been latent since the debugfs interface was introduced).
2) WARN_ON_ONCE in dl_server_start():
WARNING: kernel/sched/deadline.c:1805 at dl_server_start+0x232/0x270
Commit ee6e44dfe6 ("sched/deadline: Stop dl_server before CPU goes
offline") added this check to catch enqueueing the server on an
offline rq.
There's no meaningful semantics for re-configuring the per-CPU dl_server
bandwidth while the CPU is offline, so simply reject the write with
-EBUSY so userspace gets a clear error.
Closes: https://lore.kernel.org/all/20260526092228.3B6891F00A3A@smtp.kernel.org/
Fixes: d741f297bc ("sched/fair: Fair server interface")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Tested-by: abaci-kreproducer <abaci@linux.alibaba.com>
Link: https://patch.msgid.link/20260526100502.575774-1-arighi@nvidia.com
Venkat Reported a boot kernel panic next-20260522. Git bisect pointed to
b5ea300a17 ("sched/cache: Make LLC id continuous")
Stacktrace points to llc_mask being null.
NIP [c000000000e58504] _find_first_bit+0x44/0x130
LR [c000000000e58500] _find_first_bit+0x40/0x130
Call Trace:
build_sched_domains+0xad8/0xe50
sched_init_smp+0xa8/0x164
kernel_init_freeable+0x250/0x370
ret_from_kernel_user_thread+0x14/0x1c
On powerpc, cpu_coregroup_mask is available only when the underlying
hardware support coregroup. In shared LPAR, QEMU guest or power9 etc
coregroup isn't supported. In such cases llc_mask was being referenced
when it was null leading to panic.
On powerpc, LLC is at SMT core level. So assumption that coregroup(MC)
domain point to LLC is wrong. Provide a way for archs to say where its
LLC is if it not at MC domain.
Fixes: b5ea300a17 ("sched/cache: Make LLC id continuous")
Closes: https://lore.kernel.org/all/51154de7-3700-4cb4-82f2-1b3a8fa427f7@linux.ibm.com/
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Co-developed-by: Chen, Yu C <yu.c.chen@intel.com>
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Tested-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://patch.msgid.link/20260529075712.1181039-1-sshegde@linux.ibm.com
Commit 8312cab5ff ("timers/migration: Rename 'online' bit to
'available'") renamed the 'online' field of struct tmigr_cpu to
'available'. The kernel doc comment above the struct still describes the
old field name.
Update it to reflect the actual field name and use the 'available' wording
in the description.
Fixes: 8312cab5ff ("timers/migration: Rename 'online' bit to 'available'")
Signed-off-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260526022106.1302279-1-zhanxusheng@xiaomi.com
When sibling CPU exclusion occurs, a partition's user_xcpus may contain
CPUs that were never actually granted to it. These CPUs are present in
user_xcpus(cs) but not in cs->effective_xcpus.
The partcmd_update path in update_parent_effective_cpumask() uses
user_xcpus(cs) (via the local variable xcpus) to compute the addmask
(CPUs to return to parent) and delmask (CPUs to request from parent).
This is incorrect:
1) When newmask removes a CPU that was previously excluded by a
sibling, addmask incorrectly includes that CPU and tries to return
it to the parent even though the partition never actually owned it,
causing CPU overlap with sibling partitions and triggering warnings
in generate_sched_domains().
2) When newmask adds a previously excluded CPU that is now available,
delmask fails to request it from the parent because user_xcpus(cs)
already includes it.
Fix this by using cs->effective_xcpus instead of user_xcpus(cs) in all
partcmd_update paths that calculate addmask or delmask, including the
PERR_NOCPUS error handling paths.
Reproducers:
Example 1 - Removing a sibling-excluded CPU incorrectly returns it:
# cd /sys/fs/cgroup
# echo "0-1" > a1/cpuset.cpus
# echo "root" > a1/cpuset.cpus.partition
# echo "0-2" > b1/cpuset.cpus
# echo "root" > b1/cpuset.cpus.partition
# echo "2" > b1/cpuset.cpus
# cat cpuset.cpus.effective
# Actual: 0-1,3 Expected: 3
Example 2 - Expanding to a previously excluded CPU fails to request it:
# cd /sys/fs/cgroup
# echo "0-1" > a1/cpuset.cpus
# echo "root" > a1/cpuset.cpus.partition
# echo "0-2" > b1/cpuset.cpus
# echo "root" > b1/cpuset.cpus.partition
# echo "member" > a1/cpuset.cpus.partition
# echo "1-2" > b1/cpuset.cpus
# cat cpuset.cpus.effective
# Actual: 0-1,3 Expected: 0,3
Fixes: 2a3602030d ("cgroup/cpuset: Don't invalidate sibling partitions on cpuset.cpus conflict")
Cc: stable@vger.kernel.org # v7.0+
Suggested-by: Zhang Guopeng <zhangguopeng@kylinos.cn>
Signed-off-by: Sun Shaojie <sunshaojie@kylinos.cn>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull misc fixes from Andrew Morton:
"13 hotfixes. 9 are for MM. 9 are cc:stable and the remaining 4 address
post-7.1 issues or aren't considered suitable for backporting.
All patches are singletons - please see the individual changelogs for
details"
* tag 'mm-hotfixes-stable-2026-05-25-16-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
Revert "mm: introduce a new page type for page pool in page type"
mm/vmalloc: do not trigger BUG() on BH disabled context
MAINTAINERS, mailmap: change email for Eugen Hristev
mm/migrate_device: fix pgtable leak in migrate_vma_insert_huge_pmd_page
kernel/fork: validate exit_signal in kernel_clone()
mm: memcontrol: propagate NMI slab stats to memcg vmstats
mm/damon/sysfs-schemes: delete tried region in regions_rmdirs()
mm/rmap: initialize nr_pages to 1 at loop start in try_to_unmap_one
zram: fix use-after-free in zram_writeback_endio
memfd: deny writeable mappings when implying SEAL_WRITE
ipc: limit next_id allocation to the valid ID range
Revert "mm/hugetlbfs: update hugetlbfs to use mmap_prepare"
MAINTAINERS: .mailmap: update after GEHC spin-off
Reading /proc/interrupts iterates over the interrupt number space one by
one and looks up the descriptors one by one. That's just a waste of time.
When CONFIG_GENERIC_IRQ_SHOW is enabled this can utilize the maple tree and
cache the descriptor pointer efficiently for the sequence file operations.
Implement a CONFIG_GENERIC_IRQ_SHOW specific version in the core code and
leave the fs/proc/ variant for the legacy architectures which ignore generic
code.
This reduces the time wasted for looking up the next record significantly.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Link: https://patch.msgid.link/20260517194932.165280601@kernel.org
The chip name column in the /proc/interrupt output is 8 characters and
right aligned, which causes visual clutter due to the fixed length and the
alignment. Many interrupt chips, e.g. PCI/MSI[X] have way longer names.
Update the length when a chip is assigned to an interrupt and utilize this
information for the output. Align it left so all chip names start at the
begin of the column.
Update the GDB script as well and disentangle the header maze so it
actually works with all .config combinations.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Link: https://patch.msgid.link/20260517194932.085786035@kernel.org
Quite some architectures have four character wide acronyms for architecture
specific interrupts like IPI, NMI, etc.
The default precision of printing the Linux device interrupt numbers is
three, which causes quite some code to play games with adding or omitting
space after the acronym and the colon in order to keep the per CPU numbers
properly aligned.
Increase the default number precision to four in the core code and get rid
of the space games all over the place. At the same time align all
architecture specific descriptor texts left so that they show up in the
same column as the interrupt chip names, which makes the output more
uniform accross architectures. Fix up the GDB script to this new scheme as
well.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260517194931.839482411@kernel.org
Calculating the precision of the interrupt number column on every initial
show_interrupt() invocation is a pointless exercise as the underlying
maximum number of interrupts rarely changes.
Calculate it only when that number is modified and let show_interrupts()
use the cached value.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Reviewed-by: Radu Rendec <radu@rendec.net>
Link: https://patch.msgid.link/20260517194931.760664517@kernel.org
show_interrupts() evaluates a boatload of conditions to establish whether
it should expose an interrupt in /proc/interrupts or not.
That can be simplified by caching the condition in an internal status flag,
which is updated when one of the relevant inputs changes.
The irq_desc::kstat_irq check is dropped because visible interrupt
descriptors always have a valid pointer.
As a result the number of instructions and branches for reading
/proc/interrupts is reduced significantly.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Reviewed-by: Radu Rendec <radu@rendec.net>
Link: https://patch.msgid.link/20260517194931.680943749@kernel.org
Interrupts which are not marked per CPU increment not only the per CPU
statistics, but also the accumulation counter irq_desc::tot_count.
Change the counter to type unsigned long so it does not produce sporadic
zeros due to wrap arounds on 64-bit machines and do a quick check for non
per CPU interrupts. If the counter is zero, then simply emit a full set of
zero strings. That spares the evaluation of the per CPU counters completely
for interrupts with zero events.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Reviewed-by: Radu Rendec <radu@rendec.net>
Link: https://patch.msgid.link/20260517194931.115522199@kernel.org
A large portion of interrupt count entries are zero. There is no point in
formatting the zero value as it is way cheeper to just emit a constant
string.
Collect the number of consecutive zero counts and emit them in one go
before a non-zero count and at the end of the line.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Reviewed-by: Radu Rendec <radu@rendec.net>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://patch.msgid.link/20260517194931.034728540@kernel.org
The CRC uncompressed buffer pointer array has the same lifetime as
struct crc_data, but it is currently allocated separately. That adds
another allocation failure path and a matching cleanup branch without
providing any extra flexibility.
Store the pointer array as a flexible array member and allocate it
together with the crc_data using kzalloc_flex(). The array remains
zero-initialized, while the allocation and error handling become
simpler.
Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260510213948.41750-1-rosenp@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The reason for pick_next_task_fair() is the put/set optimization that
avoids touching the common ancestors. However, it is possible to
implement this in the put_prev_task() and set_next_task() calls as
used in put_prev_set_next_task().
Notably, put_prev_set_next_task() is the only site that:
- calls put_prev_task() with a .next argument;
- calls set_next_task() with .first = true.
This means that put_prev_task() can determine the common hierarchy and
stop there, and then set_next_task() can terminate where put_prev_task
stopped.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://patch.msgid.link/20260511120628.057634261@infradead.org
With commit 50653216e4 ("sched: Add support to pick functions to
take rf") removing the balance callback, the pick_task() callback is
in charge of newidle balancing.
This means pick_task_fair() should do so too. This hasn't been a
problem in practise because pick_next_task_fair() is used. However,
since we'll be removing that one shortly, make sure pick_next_task()
is up to scratch.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://patch.msgid.link/20260511120627.944705718@infradead.org
Commit c9d93a73ce ("sched/fair: Drop redundant RCU read lock in NOHZ
kick path") removed the rcu_read_lock()/unlock() pair from
set_cpu_sd_state_busy() and set_cpu_sd_state_idle() on the assumption
that all callers run in a safe context for rcu_dereference_all(): IRQs
disabled or cpus_write_lock() held.
That assumption is wrong for the CPU hotplug teardown path. When CPUs
are taken offline, set_cpu_sd_state_busy() is invoked via:
cpuhp/N kthread
cpuhp_thread_fun()
cpuhp_invoke_callback()
sched_cpu_deactivate()
nohz_balance_exit_idle()
set_cpu_sd_state_busy()
rcu_dereference_all(per_cpu(sd_llc, cpu))
The cpuhp kthread holds cpu_hotplug_lock (percpu-rwsem) but runs with
preemption and IRQs enabled. As a result, lockdep correctly reports a
suspicious RCU usage on CPU offline, e.g.:
# echo 0 > /sys/devices/system/cpu/cpu1/online
=============================
WARNING: suspicious RCU usage
-----------------------------
kernel/sched/fair.c:12793 suspicious rcu_dereference_check() usage!
...
2 locks held by cpuhp/1/20:
#0: (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x42/0x1ae
#1: (cpuhp_state-down){+.+.}-{0:0}, at: cpuhp_thread_fun+0x72/0x1ae
Call Trace:
lockdep_rcu_suspicious
nohz_balance_exit_idle
sched_cpu_deactivate
cpuhp_invoke_callback
cpuhp_thread_fun
smpboot_thread_fn
Fix this by adding RCU read lock coverage to the one caller that lacks
it: nohz_balance_exit_idle() in the CPU hotplug teardown.
The other callers (nohz_balancer_kick() and nohz_balance_enter_idle())
genuinely run with IRQs disabled, so they remain unchanged.
Fixes: c9d93a73ce ("sched/fair: Drop redundant RCU read lock in NOHZ kick path")
Closes: https://lore.kernel.org/all/38fe0a1d-1a48-435a-910a-c278024d9ac9@samsung.com/
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260522092523.2046095-1-arighi@nvidia.com
