Separate settings for gfx (ME) and compute (MEC).
Use this rather than explicitly specifying it.
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And while we are at it remove the reset parameter as it's
no longer needed.
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And while we are at it remove the reset parameter as it's
no longer needed.
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Call MES with detect only to get the list of hung queues rather
than detecting an resetting. Then loop over the bad queues
and reset them individually and finally remove them. Skip
queues not owned by KFD.
v2: always call resume_all after queue reset
Reviewed-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the parameter in SET_HW_RESOURCES API 1. Align with the setting
of enable_lr_compute_wa 2. Add enable_compute_pipe_reset to enable
pipe reset when compute queue reset failes
v2: add driver flags to track when we enable it
Signed-off-by: Shaoyun Liu <shaoyun.liu@amd.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This makes the code flows cleaner and it's only supported on
the use_mmio path.
v2: fix typo
v3: fix typo
v4: directly clear ACTIVE and DEQUEUE_REQUEST (Shaoyun Liu)
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This makes the code flows cleaner and it's only supported on
the use_mmio path.
v2: fix typo
v3: fix typo
v4: directly clear ACTIVE and DEQUEUE_REQUEST (Shaoyun Liu)
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Refactor gfx_v12_0_reset_compute_pipe() to accept explicit me, pipe, and
queue parameters instead of deriving them from the ring structure. This
enables the function to be used in generic pipe reset flows.
Introduce gfx_v12_0_clear_hqds_on_mec_pipe() to properly clear
CP_HQD_ACTIVE and CP_HQD_DEQUEUE_REQUEST for all queues on a given MEC
pipe while the pipe reset is asserted, ensuring the HQDs are torn down
correctly before deasserting reset.
Switch the KCQ reset path to use the common MEC pipe reset helper
amdgpu_gfx_mec_pipe_reset_run(), which coordinates the reset sequence
including KFD suspend/resume to avoid conflicts with user mode queues.
v2: just update the sequence (Alex)
v3: directly clear ACTIVE and DEQUEUE_REQUEST (Shaoyun Liu)
Suggested-by: Manu Rastogi <manu.rastogi@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Refactor gfx_v11_0_reset_compute_pipe() to accept explicit me, pipe, and
queue parameters instead of deriving them from the ring structure. This
enables the function to be used in generic pipe reset flows.
Introduce gfx_v11_0_clear_hqds_on_mec_pipe() to properly clear
CP_HQD_ACTIVE and CP_HQD_DEQUEUE_REQUEST for all queues on a given MEC
pipe while the pipe reset is asserted, ensuring the HQDs are torn down
correctly before deasserting reset.
Switch the KCQ reset path to use the common MEC pipe reset helper
amdgpu_gfx_mec_pipe_reset_run(), which coordinates the reset sequence
including KFD suspend/resume to avoid conflicts with user mode queues.
v2: just update the sequence (Alex)
v3: directly clear ACTIVE and DEQUEUE_REQUEST (Shaoyun Liu)
Suggested-by: Manu Rastogi <manu.rastogi@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when suspend_all_gangs is issued to pipe0 MES during system suspend or runtime PM, pipe0 can only suspend and resume queues it has tracked.
KCQs registered with a non-zero pipe slot may not be correctly handled, leaving them in an inconsistent state after resume.
v3: fix the schedule pipe issue
Suggested-by: Michael Chen <michael.chen@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when suspend_all_gangs is issued to pipe0 MES during system suspend or runtime PM, pipe0 can only suspend and resume queues it has tracked.
KCQs registered with a non-zero pipe slot may not be correctly handled, leaving them in an inconsistent state after resume.
v3: fix the schedule pipe issue
v4: use schedule pipe for KQ resets
Reviewed-by: Michael Chen <michael.chen@amd.com>
Suggested-by: Michael Chen <michael.chen@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
s/soc21_grbm_select/soc24_grbm_select/
No functional difference as the register offsets are
the same.
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All the guilty fence parameter to be NULL. Will be needed for
future functionality.
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a helper to extract the first amdgpu_fence which has
not yet signalled and is thus guilty or at least collateral
damage.
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If we've already seen a fence, don't backup the
ring contents since presumably either the previous reset
was not successful or there was something wrong with the
data.
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Return early in amdgpu_ring_set_fence_errors_and_reemit()
if ring_backup_entries_to_copy is 0. That means that either
the ring is idle and there is nothing to reemit, or there
some reason why we should reemit, so return early and
signal the fences (if applicable).
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While system heap and system_cc_shared heap share a lot of code
and hence the same source file, their users have different needs.
system heap users need it to be a loadable module, while
system_cc_shared heap users don't.
Building as a loadable module breaks system_cc_shared heap on
powerpc and s390 due to un-exported set_memory_encrypted /
set_memory_decrypted functions.
Fix these by reorganising code to put the system_cc_shared heap
under a new Kconfig symbol, which allows either building both
into the kernel, or leave encryption up to the consumers of the
system heap.
Fixes: fd55edff8a ("dma-buf: heaps: system: Turn the heap into a module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
[sumits: updated DMABUF_HEAPS_CC_SYSTEM to DMABUF_HEAPS_SYSTEM_CC_SHARED]
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260610142329.3836808-1-sumit.semwal@linaro.org
Add client->sva = NULL after the unbind makes it consistent with how
amdxdna_sva_fini() already clears the pointer after unbinding. The
IS_ERR_OR_NULL guard in sva_fini will then correctly skip the second
unbind.
Fixes: 3cc5d7a595 ("accel/amdxdna: Add carveout memory support for non-IOMMU systems")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260604202815.2425882-1-lizhi.hou@amd.com
A NULL pointer dereference was observed in the AMD64 AGP driver when
running in a virtualized environment (e.g. qemu/kvm) without a physical
AMD northbridge. The crash occurs in amd64_fetch_size() when attempting
to dereference the pointer returned by node_to_amd_nb(0).
The root cause of this crash is broken error propagation in
agp_amd64_probe(): When no AMD northbridges are found, cache_nbs()
correctly returns -ENODEV. However, the probe function erroneously
checks the return value against exactly -1, rather than < 0.
As a result, the hardware absence error is masked, allowing the driver
to improperly proceed with initialization. It eventually calls
agp_add_bridge(), which invokes amd64_fetch_size(). Since the hardware
does not exist, node_to_amd_nb(0) returns NULL, leading to a General
Protection Fault (GPF) when accessing its ->misc member.
Fix the issue by correcting the error check in agp_amd64_probe() to
abort properly when cache_nbs() returns any negative error code. This
prevents the driver from erroneously proceeding without hardware, thereby
avoiding the subsequent NULL pointer dereference at its source.
Fixes: a32073bffc ("[PATCH] x86_64: Clean and enhance up K8 northbridge access code")
Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v2.6.18+
Link: https://patch.msgid.link/20260504074823.99377-1-w15303746062@163.com
DRM Rust changes for v7.2-rc1
- Driver Core (shared via signed tag dd-lifetimes-7.2-rc1):
- Introduce Higher-Ranked Lifetime Types (HRT) for Rust device
drivers, allowing driver structs to hold device resources like
pci::Bar and IoMem directly with a lifetime tied to the binding
scope, removing the need for Devres indirection and ARef<Device>.
- Replace drvdata() with scoped registration data on the auxiliary
bus, using the new ForLt trait to thread lifetimes through
registrations. Remove drvdata() and driver_type.
- DRM:
- Add GPUVM immediate mode abstraction for Rust GPU drivers:
- In immediate mode, GPU virtual address space state is updated
during job execution (in the DMA fence signalling critical path),
keeping the GPUVM and the GPU's address space always in sync.
- Provide GpuVm, GpuVa, and GpuVmBo types for managing address
spaces, virtual mappings, and GEM object backing respectively.
- Provide split-merge map/unmap operations that handle partial
overlaps with existing mappings.
- drm_exec integration for dma_resv locking and GEM object
validation based on the external/evicted object lists are not
yet covered and planned as follow-up work.
- Introduce DeviceContext type state for drm::Device, allowing
drivers to restrict operations to contexts where the device is
guaranteed to be registered (or not yet registered) with userspace.
- Add FEAT_RENDER flag to the Driver trait for render node support.
- Nova:
- Hopper/Blackwell enablement:
- Add GPU identification and architecture-based HAL selection for
Hopper (GH100) and Blackwell (GB100, GB202).
- Implement the FSP (Foundation Security Processor) boot path used by
Hopper and Blackwell, including FSP falcon engine support, EMEM
operations, MCTP/NVDM message infrastructure, and FSP Chain of
Trust boot with GSP lockdown release.
- Add support for 32-bit firmware images and auto-detection of
firmware image format.
- Add architecture-specific framebuffer, sysmem flush, PCI config
mirror, DMA mask, and WPR/non-WPR heap sizing.
- GSP boot and unload:
- Refactor the GSP boot process into a chipset-specific HAL,
keeping the SEC2 and FSP boot paths separated cleanly.
- Implement proper driver unload: send UNLOADING_GUEST_DRIVER
command, run Booter Unloader and FWSEC-SB upon unbinding, and run
the unload bundle on Gsp::boot() failure. This removes the need
for a manual GPU reset between driver unbind and re-probe.
- GA100 support:
- Add support for the GA100 GPU, including IFR header detection and
skipping, correct fwsignature selection, conditional FRTS boot,
and documentation of the IFR header layout.
- VBIOS hardening and refactoring:
- Harden VBIOS parsing with checked arithmetic, bounds-checked
accesses, and FromBytes-based structure reads throughout the FWSEC
and Falcon data paths. Simplify the overall VBIOS module
structure.
- HRT adoption:
- Use lifetime-parameterized pci::Bar directly, replacing the
Arc<Devres<Bar0>> indirection. Replace ARef<Device> with &'bound
Device in SysmemFlush and the GSP sequencer. Separate the driver
type from driver data.
- Misc:
- Rename module names to kebab-case (nova-drm, nova-core).
- Require little-endian in Kconfig, making the existing assumption
explicit.
- Tyr:
- Define comprehensive typed register blocks for GPU_CONTROL,
JOB_CONTROL, MMU_CONTROL (including per-address-space registers),
and DOORBELL_BLOCK using the kernel register!() macro. This replaces
manual bit manipulation with typed register and field accessors.
- Add shmem-backed GEM objects and set DMA mask based on GPU physical
address width.
- Adopt HRT: separate driver type from driver data, and use IoMem
directly instead of Devres for register access during probe.
- Move clock cleanup into a Drop implementation.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: "Danilo Krummrich" <dakr@kernel.org>
Link: https://patch.msgid.link/DJ0IF39U9ETK.PCCUO7ZEQ4S0@kernel.org
Need to restore any good queues even if the suspend_all
failed for some. Always run remove_queue as that will
schedule a GPU reset is removing the queue fails.
v2: move resume_all after remove
Fixes: eb067d65c3 ("drm/amdkfd: Update BadOpcode Interrupt handling with MES")
Reviewed-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
priv_reg / priv_inst / bad_op and (on v11+) userq EOP IRQs are
acquired in late_init but released in hw_fini. This split forced
gfx_v9_0_hw_fini() to defensively guard each put with
amdgpu_irq_enabled() because hw_fini runs on paths that may not
reach late_init.
amdgpu_ip_block_hw_fini() only runs after hw_init returns success,
and suspend / resume cycle the refs through the same path, so
hw_init / hw_fini pair without any extra tracking. Move the gets
there and drop the guards.
While here, fix the pre-existing partial-failure leak in
set_userq_eop_interrupts() (gfx11 / 12_0 / 12_1). amdgpu_irq_get()
increments the refcount before calling .set, so a failure partway
through the loop leaves earlier successful gets stranded. Track
the loop position and roll back on the enable path.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use strscpy to copy the buffer which makes it explicit that a valid NULL
terminated string gets copied. Also, make it explicit that the source
buffer can be copied safely to the temporary buffer by checking against
its size.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Malformed ACPI CRAT tables can advertise a zero or undersized subtype
length. The parser then fails to advance the cursor and loops forever
while the remaining image still looks large enough for a generic header.
Validate sub_type_hdr->length on each iteration before parsing or
advancing. Return -EINVAL and warn when length is zero or smaller than
the generic subtype header.
Signed-off-by: Yongqiang Sun <Yongqiang.Sun@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
