Pull tracing fixes from Steven Rostedt:
- Fix a regression in the irqsoff and wakeup latency tracing
The function graph tracer infrastructure has become generic so that
fprobes and BPF can be based on it. As it use to only handle function
graph tracing, it would always calculate the time the function
entered so that it could then calculate the time it exits and give
the length of time the function executed for. But this is not needed
for the other users (fprobes and BPF) and reading the clock adds a
non-negligible overhead, so the calculation was moved into the
function graph tracer logic.
But the irqsoff and wakeup latency tracers, when the "display-graph"
option was set, would use the function graph tracer to calculate the
times of functions during the latency. The movement of the calltime
calculation made the value zero for these tracers, and the output no
longer showed the length of time of each tracer, but instead the
absolute timestamp of when the function returned (rettime - calltime
where calltime is now zero).
Have the irqsoff and wakeup latency tracers also do the calltime
calculation as the function graph tracer does and report the proper
length of the function timings.
- Update the tracing display to reflect the new preempt lazy model
When the system is configured with preempt lazy, the output of the
trace data would state "unknown" for the current preemption model.
Because the lazy preemption model was just added, make it known to
the tracing subsystem too. This is just a one line change.
- Document multiple function graph having slightly different timings
Now that function graph tracer infrastructure is separate, this also
allows the function graph tracer to run in multiple instances (it
wasn't able to do so before). If two instances ran the function graph
tracer and traced the same functions, the timings for them will be
slightly different because each does their own timings and collects
the timestamps differently. Document this to not have people be
confused by it.
* tag 'trace-v6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Document that multiple function_graph tracing may have different times
tracing: Print lazy preemption model
tracing: Fix irqsoff and wakeup latency tracers when using function graph
Pull networking fixes from Paolo Abeni:
"Notably this includes fixes for a few regressions spotted very
recently. No known outstanding ones.
Current release - regressions:
- core: avoid CFI problems with sock priv helpers
- xsk: bring back busy polling support
- netpoll: ensure skb_pool list is always initialized
Current release - new code bugs:
- core: make page_pool_ref_netmem work with net iovs
- ipv4: route: fix drop reason being overridden in
ip_route_input_slow
- udp: make rehash4 independent in udp_lib_rehash()
Previous releases - regressions:
- bpf: fix bpf_sk_select_reuseport() memory leak
- openvswitch: fix lockup on tx to unregistering netdev with carrier
- mptcp: be sure to send ack when mptcp-level window re-opens
- eth:
- bnxt: always recalculate features after XDP clearing, fix
null-deref
- mlx5: fix sub-function add port error handling
- fec: handle page_pool_dev_alloc_pages error
Previous releases - always broken:
- vsock: some fixes due to transport de-assignment
- eth:
- ice: fix E825 initialization
- mlx5e: fix inversion dependency warning while enabling IPsec
tunnel
- gtp: destroy device along with udp socket's netns dismantle.
- xilinx: axienet: Fix IRQ coalescing packet count overflow"
* tag 'net-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
netdev: avoid CFI problems with sock priv helpers
net/mlx5e: Always start IPsec sequence number from 1
net/mlx5e: Rely on reqid in IPsec tunnel mode
net/mlx5e: Fix inversion dependency warning while enabling IPsec tunnel
net/mlx5: Clear port select structure when fail to create
net/mlx5: SF, Fix add port error handling
net/mlx5: Fix a lockdep warning as part of the write combining test
net/mlx5: Fix RDMA TX steering prio
net: make page_pool_ref_netmem work with net iovs
net: ethernet: xgbe: re-add aneg to supported features in PHY quirks
net: pcs: xpcs: actively unset DW_VR_MII_DIG_CTRL1_2G5_EN for 1G SGMII
net: pcs: xpcs: fix DW_VR_MII_DIG_CTRL1_2G5_EN bit being set for 1G SGMII w/o inband
selftests: net: Adapt ethtool mq tests to fix in qdisc graft
net: fec: handle page_pool_dev_alloc_pages error
net: netpoll: ensure skb_pool list is always initialized
net: xilinx: axienet: Fix IRQ coalescing packet count overflow
nfp: bpf: prevent integer overflow in nfp_bpf_event_output()
selftests: mptcp: avoid spurious errors on disconnect
mptcp: fix spurious wake-up on under memory pressure
mptcp: be sure to send ack when mptcp-level window re-opens
...
Pull power management fixes from Rafael Wysocki:
"Update the documentation of cpuidle governors that does not match the
code any more after previous functional changes (Rafael Wysocki) and
fix up the cpufreq Kconfig file broken inadvertently by a previous
update (Viresh Kumar)"
* tag 'pm-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Move endif to the end of Kconfig file
cpuidle: teo: Update documentation after previous changes
cpuidle: menu: Update documentation after previous changes
Pull ACPI fix from Rafael Wysocki:
"Prevent acpi_video_device_EDID() from returning a pointer to a memory
region that should not be passed to kfree() which causes one of its
users to crash randomly on attempts to free it (Chris Bainbridge)"
* tag 'acpi-6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: video: Fix random crashes due to bad kfree()
Pull btrfs fix from David Sterba:
- handle d_path() errors when canonicalizing device mapper paths during
device scan
* tag 'for-6.13-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: add the missing error handling inside get_canonical_dev_path
Merge a cpufreq fix for 6.13:
- Fix cpufreq Kconfig breakage after previous changes (Viresh Kumar).
* pm-cpufreq:
cpufreq: Move endif to the end of Kconfig file
According to RFC4303, section "3.3.3. Sequence Number Generation",
the first packet sent using a given SA will contain a sequence
number of 1.
This is applicable to both ESN and non-ESN mode, which was not covered
in commit mentioned in Fixes line.
Fixes: 3d42c8cc67 ("net/mlx5e: Ensure that IPsec sequence packet number starts from 1")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
All packet offloads SAs have reqid in it to make sure they have
corresponding policy. While it is not strictly needed for transparent
mode, it is extremely important in tunnel mode. In that mode, policy and
SAs have different match criteria.
Policy catches the whole subnet addresses, and SA catches the tunnel gateways
addresses. The source address of such tunnel is not known during egress packet
traversal in flow steering as it is added only after successful encryption.
As reqid is required for packet offload and it is unique for every SA,
we can safely rely on it only.
The output below shows the configured egress policy and SA by strongswan:
[leonro@vm ~]$ sudo ip x s
src 192.169.101.2 dst 192.169.101.1
proto esp spi 0xc88b7652 reqid 1 mode tunnel
replay-window 0 flag af-unspec esn
aead rfc4106(gcm(aes)) 0xe406a01083986e14d116488549094710e9c57bc6 128
anti-replay esn context:
seq-hi 0x0, seq 0x0, oseq-hi 0x0, oseq 0x0
replay_window 1, bitmap-length 1
00000000
crypto offload parameters: dev eth2 dir out mode packet
[leonro@064 ~]$ sudo ip x p
src 192.170.0.0/16 dst 192.170.0.0/16
dir out priority 383615 ptype main
tmpl src 192.169.101.2 dst 192.169.101.1
proto esp spi 0xc88b7652 reqid 1 mode tunnel
crypto offload parameters: dev eth2 mode packet
Fixes: b3beba1fb4 ("net/mlx5e: Allow policies with reqid 0, to support IKE policy holes")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If failed to add SF, error handling doesn't delete the SF from the
SF table. But the hw resources are deleted. So when unload driver,
hw resources will be deleted again. Firmware will report syndrome
0x68def3 which means "SF is not allocated can not deallocate".
Fix it by delete SF from SF table if failed to add SF.
Fixes: 2597ee190b ("net/mlx5: Call mlx5_sf_id_erase() once in mlx5_sf_dealloc()")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
User added steering rules at RDMA_TX were being added to the first prio,
which is the counters prio.
Fix that so that they are correctly added to the BYPASS_PRIO instead.
Fixes: 24670b1a31 ("net/mlx5: Add support for RDMA TX steering")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In 4.19, before the switch to linkmode bitmaps, PHY_GBIT_FEATURES
included feature bits for aneg and TP/MII ports.
SUPPORTED_TP | \
SUPPORTED_MII)
SUPPORTED_10baseT_Full)
SUPPORTED_100baseT_Full)
SUPPORTED_1000baseT_Full)
PHY_100BT_FEATURES | \
PHY_DEFAULT_FEATURES)
PHY_1000BT_FEATURES)
Referenced commit expanded PHY_GBIT_FEATURES, silently removing
PHY_DEFAULT_FEATURES. The removed part can be re-added by using
the new PHY_GBIT_FEATURES definition.
Not clear to me is why nobody seems to have noticed this issue.
I stumbled across this when checking what it takes to make
phy_10_100_features_array et al private to phylib.
Fixes: d0939c26c5 ("net: ethernet: xgbe: expand PHY_GBIT_FEAUTRES")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/46521973-7738-4157-9f5e-0bb6f694acba@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On a port with SGMII fixed-link at SPEED_1000, DW_VR_MII_DIG_CTRL1 gets
set to 0x2404. This is incorrect, because bit 2 (DW_VR_MII_DIG_CTRL1_2G5_EN)
is set.
It comes from the previous write to DW_VR_MII_AN_CTRL, because the "val"
variable is reused and is dirty. Actually, its value is 0x4, aka
FIELD_PREP(DW_VR_MII_PCS_MODE_MASK, DW_VR_MII_PCS_MODE_C37_SGMII).
Resolve the issue by clearing "val" to 0 when writing to a new register.
After the fix, the register value is 0x2400.
Prior to the blamed commit, when the read-modify-write was open-coded,
the code saved the content of the DW_VR_MII_DIG_CTRL1 register in the
"ret" variable.
Fixes: ce8d6081fc ("net: pcs: xpcs: add _modify() accessors")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250114164721.2879380-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Because of patch[1] the graft behaviour changed
So the command:
tcq replace parent 100:1 handle 204:
Is no longer valid and will not delete 100:4 added by command:
tcq replace parent 100:4 handle 204: pfifo_fast
So to maintain the original behaviour, this patch manually deletes 100:4
and grafts 100:1
Note: This change will also work fine without [1]
[1] https://lore.kernel.org/netdev/20250111151455.75480-1-jhs@mojatatu.com/T/#u
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The fec_enet_update_cbd function calls page_pool_dev_alloc_pages but did
not handle the case when it returned NULL. There was a WARN_ON(!new_page)
but it would still proceed to use the NULL pointer and then crash.
This case does seem somewhat rare but when the system is under memory
pressure it can happen. One case where I can duplicate this with some
frequency is when writing over a smbd share to a SATA HDD attached to an
imx6q.
Setting /proc/sys/vm/min_free_kbytes to higher values also seems to solve
the problem for my test case. But it still seems wrong that the fec driver
ignores the memory allocation error and can crash.
This commit handles the allocation error by dropping the current packet.
Fixes: 95698ff617 ("net: fec: using page pool to manage RX buffers")
Signed-off-by: Kevin Groeneveld <kgroeneveld@lenbrook.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250113154846.1765414-1-kgroeneveld@lenbrook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When __netpoll_setup() is called directly, instead of through
netpoll_setup(), the np->skb_pool list head isn't initialized.
If skb_pool_flush() is later called, then we hit a NULL pointer
in skb_queue_purge_reason(). This can be seen with this repro,
when CONFIG_NETCONSOLE is enabled as a module:
ip tuntap add mode tap tap0
ip link add name br0 type bridge
ip link set dev tap0 master br0
modprobe netconsole netconsole=4444@10.0.0.1/br0,9353@10.0.0.2/
rmmod netconsole
The backtrace is:
BUG: kernel NULL pointer dereference, address: 0000000000000008
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
... ... ...
Call Trace:
<TASK>
__netpoll_free+0xa5/0xf0
br_netpoll_cleanup+0x43/0x50 [bridge]
do_netpoll_cleanup+0x43/0xc0
netconsole_netdev_event+0x1e3/0x300 [netconsole]
unregister_netdevice_notifier+0xd9/0x150
cleanup_module+0x45/0x920 [netconsole]
__se_sys_delete_module+0x205/0x290
do_syscall_64+0x70/0x150
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Move the skb_pool list setup and initial skb fill into __netpoll_setup().
Fixes: 221a9c1df7 ("net: netpoll: Individualize the skb pool")
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250114011354.2096812-1-jsperbeck@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull seccomp fix from Kees Cook:
"Fix a randconfig failure:
- Unconditionally define stub for !CONFIG_SECCOMP (Linus Walleij)"
* tag 'seccomp-v6.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: Stub for !CONFIG_SECCOMP
Tony Nguyen says:
====================
Fix E825 initialization
Grzegorz Nitka says:
E825 products have incorrect initialization procedure, which may lead to
initialization failures and register values.
Fix E825 products initialization by adding correct sync delay, checking
the PHY revision only for current PHY and adding proper destination
device when reading port/quad.
In addition, E825 uses PF ID for indexing per PF registers and as
a primary PHY lane number, which is incorrect.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Add correct PHY lane assignment
ice: Fix ETH56G FC-FEC Rx offset value
ice: Fix quad registers read on E825
ice: Fix E825 initialization
====================
Link: https://patch.msgid.link/20250113182840.3564250-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: fixes for connect selftest flakes
Last week, Jakub reported [1] that the MPTCP Connect selftest was
unstable. It looked like it started after the introduction of some fixes
[2]. After analysis from Paolo, these patches revealed existing bugs,
that should be fixed by the following patches.
- Patch 1: Make sure ACK are sent when MPTCP-level window re-opens. In
some corner cases, the other peer was not notified when more data
could be sent. A fix for v5.11, but depending on a feature introduced
in v5.19.
- Patch 2: Fix spurious wake-up under memory pressure. In this
situation, the userspace could be invited to read data not being there
yet. A fix for v6.7.
- Patch 3: Fix a false positive error when running the MPTCP Connect
selftest with the "disconnect" cases. The userspace could disconnect
the socket too soon, which would reset (MP_FASTCLOSE) the connection,
interpreted as an error by the test. A fix for v5.17.
Link: https://lore.kernel.org/20250107131845.5e5de3c5@kernel.org [1]
Link: https://lore.kernel.org/20241230-net-mptcp-rbuf-fixes-v1-0-8608af434ceb@kernel.org [2]
====================
Link: https://patch.msgid.link/20250113-net-mptcp-connect-st-flakes-v1-0-0d986ee7b1b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The disconnect test-case generates spurious errors:
INFO: disconnect
INFO: extra options: -I 3 -i /tmp/tmp.r43niviyoI
01 ns1 MPTCP -> ns1 (10.0.1.1:10000 ) MPTCP (duration 140ms) [FAIL]
file received by server does not match (in, out):
Unexpected revents: POLLERR/POLLNVAL(19)
-rw-r--r-- 1 root root 10028676 Jan 10 10:47 /tmp/tmp.r43niviyoI.disconnect
Trailing bytes are:
��\����R���!8��u2��5N%
-rw------- 1 root root 9992290 Jan 10 10:47 /tmp/tmp.Os4UbnWbI1
Trailing bytes are:
��\����R���!8��u2��5N%
02 ns1 MPTCP -> ns1 (dead:beef:1::1:10001) MPTCP (duration 206ms) [ OK ]
03 ns1 MPTCP -> ns1 (dead:beef:1::1:10002) TCP (duration 31ms) [ OK ]
04 ns1 TCP -> ns1 (dead:beef:1::1:10003) MPTCP (duration 26ms) [ OK ]
[FAIL] Tests of the full disconnection have failed
Time: 2 seconds
The root cause is actually in the user-space bits: the test program
currently disconnects as soon as all the pending data has been spooled,
generating an FASTCLOSE. If such option reaches the peer before the
latter has reached the closed status, the msk socket will report an
error to the user-space, as per protocol specification, causing the
above failure.
Address the issue explicitly waiting for all the relevant sockets to
reach a closed status before performing the disconnect.
Fixes: 05be5e273c ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250113-net-mptcp-connect-st-flakes-v1-3-0d986ee7b1b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mptcp_cleanup_rbuf() is responsible to send acks when the user-space
reads enough data to update the receive windows significantly.
It tries hard to avoid acquiring the subflow sockets locks by checking
conditions similar to the ones implemented at the TCP level.
To avoid too much code duplication - the MPTCP protocol can't reuse the
TCP helpers as part of the relevant status is maintained into the msk
socket - and multiple costly window size computation, mptcp_cleanup_rbuf
uses a rough estimate for the most recently advertised window size:
the MPTCP receive free space, as recorded as at last-ack time.
Unfortunately the above does not allow mptcp_cleanup_rbuf() to detect
a zero to non-zero win change in some corner cases, skipping the
tcp_cleanup_rbuf call and leaving the peer stuck.
After commit ea66758c17 ("tcp: allow MPTCP to update the announced
window"), MPTCP has actually cheap access to the announced window value.
Use it in mptcp_cleanup_rbuf() for a more accurate ack generation.
Fixes: e3859603ba ("mptcp: better msk receive window updates")
Cc: stable@vger.kernel.org
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/20250107131845.5e5de3c5@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250113-net-mptcp-connect-st-flakes-v1-1-0d986ee7b1b6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull pci fix from Bjorn Helgaas:
- Prevent bwctrl NULL pointer dereference that caused hangs on shutdown
on ASUS ROG Strix SCAR 17 G733PYV (Lukas Wunner)
* tag 'pci-v6.13-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/bwctrl: Fix NULL pointer deref on unbind and bind
Pull SCSI fixes from James Bottomley:
"One iscsi driver fix and one core fix.
The core fix is an important one because a retry efficiency update is
now causing some USB devices to get the wrong size on discovery (it
upset their retry logic for READ_CAPACITY_16)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: iscsi: Fix redundant response for ISCSI_UEVENT_GET_HOST_STATS request
scsi: core: Fix command pass through retry regression
Pull sound fixes from Takashi Iwai:
"Hopefully the last PR for 6.13. This became bigger than wished due to
the timing after holiday breaks.
The only large LOC is the additional document for Cirrus codec which
is nice for users (and absolutely safe). All the rest are small fixes
in ASoC Rcar and codecs as well as HD-audio quirks (And no fix for USB
guitar pedals seen yet :)"
* tag 'sound-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix volume adjustment issue on Lenovo ThinkBook 16P Gen5
ALSA: hda/realtek: fixup ASUS H7606W
ALSA: hda/realtek: fixup ASUS GA605W
ALSA: hda/realtek: Add support for Ayaneo System using CS35L41 HDA
ASoC: rsnd: check rsnd_adg_clk_enable() return value
ASoC: cs42l43: Add codec force suspend/resume ops
ALSA: doc: Add codecs/index.rst to top-level index
ALSA: doc: cs35l56: Add information about Cirrus Logic CS35L54/56/57
ASoC: samsung: Add missing depends on I2C
MAINTAINERS: add missing maintainers for Simple Audio Card
ASoC: samsung: Add missing selects for MFD_WM8994
ASoC: codecs: es8316: Fix HW rate calculation for 48Mhz MCLK
ASoC: wm8994: Add depends on MFD core
ASoC: tas2781: Fix occasional calibration failture
ASoC: codecs: ES8326: Adjust ANA_MICBIAS to reduce pop noise
The function graph tracer now calculates the calltime internally and for
each instance. If there are two instances that are running function graph
tracer and are tracing the same functions, the timings of the length of
those functions may be slightly different:
# trace-cmd record -B foo -p function_graph -B bar -p function_graph sleep 5
# trace-cmd report
[..]
bar: sleep-981 [000] ...1. 1101.109027: funcgraph_entry: 0.764 us | mutex_unlock(); (ret=0xffff8abcc256c300)
foo: sleep-981 [000] ...1. 1101.109028: funcgraph_entry: 0.748 us | mutex_unlock(); (ret=0xffff8abcc256c300)
bar: sleep-981 [000] ..... 1101.109029: funcgraph_exit: 2.456 us | } (ret=0xffff8abcc256c300)
foo: sleep-981 [000] ..... 1101.109029: funcgraph_exit: 2.403 us | } (ret=0xffff8abcc256c300)
bar: sleep-981 [000] d..1. 1101.109031: funcgraph_entry: 0.844 us | fpregs_assert_state_consistent(); (ret=0x0)
foo: sleep-981 [000] d..1. 1101.109032: funcgraph_entry: 0.803 us | fpregs_assert_state_consistent(); (ret=0x0)
Link: https://lore.kernel.org/all/20250114101806.b2778cb01f34f5be9d23ad98@kernel.org/
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Suggested-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250114101202.02e7bc68@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function graph tracer has become generic so that kretprobes and BPF
can use it along with function graph tracing itself. Some of the
infrastructure was specific for function graph tracing such as recording
the calltime and return time of the functions. Calling the clock code on a
high volume function does add overhead. The calculation of the calltime
was removed from the generic code and placed into the function graph
tracer itself so that the other users did not incur this overhead as they
did not need that timestamp.
The calltime field was still kept in the generic return entry structure
and the function graph return entry callback filled it as that structure
was passed to other code.
But this broke both irqsoff and wakeup latency tracer as they still
depended on the trace structure containing the calltime when the option
display-graph is set as it used some of those same functions that the
function graph tracer used. But now the calltime was not set and was just
zero. This caused the calculation of the function time to be the absolute
value of the return timestamp and not the length of the function.
# cd /sys/kernel/tracing
# echo 1 > options/display-graph
# echo irqsoff > current_tracer
The tracers went from:
# REL TIME CPU TASK/PID |||| DURATION FUNCTION CALLS
# | | | | |||| | | | | | |
0 us | 4) <idle>-0 | d..1. | 0.000 us | irqentry_enter();
3 us | 4) <idle>-0 | d..2. | | irq_enter_rcu() {
4 us | 4) <idle>-0 | d..2. | 0.431 us | preempt_count_add();
5 us | 4) <idle>-0 | d.h2. | | tick_irq_enter() {
5 us | 4) <idle>-0 | d.h2. | 0.433 us | tick_check_oneshot_broadcast_this_cpu();
6 us | 4) <idle>-0 | d.h2. | 2.426 us | ktime_get();
9 us | 4) <idle>-0 | d.h2. | | tick_nohz_stop_idle() {
10 us | 4) <idle>-0 | d.h2. | 0.398 us | nr_iowait_cpu();
11 us | 4) <idle>-0 | d.h1. | 1.903 us | }
11 us | 4) <idle>-0 | d.h2. | | tick_do_update_jiffies64() {
12 us | 4) <idle>-0 | d.h2. | | _raw_spin_lock() {
12 us | 4) <idle>-0 | d.h2. | 0.360 us | preempt_count_add();
13 us | 4) <idle>-0 | d.h3. | 0.354 us | do_raw_spin_lock();
14 us | 4) <idle>-0 | d.h2. | 2.207 us | }
15 us | 4) <idle>-0 | d.h3. | 0.428 us | calc_global_load();
16 us | 4) <idle>-0 | d.h3. | | _raw_spin_unlock() {
16 us | 4) <idle>-0 | d.h3. | 0.380 us | do_raw_spin_unlock();
17 us | 4) <idle>-0 | d.h3. | 0.334 us | preempt_count_sub();
18 us | 4) <idle>-0 | d.h1. | 1.768 us | }
18 us | 4) <idle>-0 | d.h2. | | update_wall_time() {
[..]
To:
# REL TIME CPU TASK/PID |||| DURATION FUNCTION CALLS
# | | | | |||| | | | | | |
0 us | 5) <idle>-0 | d.s2. | 0.000 us | _raw_spin_lock_irqsave();
0 us | 5) <idle>-0 | d.s3. | 312159583 us | preempt_count_add();
2 us | 5) <idle>-0 | d.s4. | 312159585 us | do_raw_spin_lock();
3 us | 5) <idle>-0 | d.s4. | | _raw_spin_unlock() {
3 us | 5) <idle>-0 | d.s4. | 312159586 us | do_raw_spin_unlock();
4 us | 5) <idle>-0 | d.s4. | 312159587 us | preempt_count_sub();
4 us | 5) <idle>-0 | d.s2. | 312159587 us | }
5 us | 5) <idle>-0 | d.s3. | | _raw_spin_lock() {
5 us | 5) <idle>-0 | d.s3. | 312159588 us | preempt_count_add();
6 us | 5) <idle>-0 | d.s4. | 312159589 us | do_raw_spin_lock();
7 us | 5) <idle>-0 | d.s3. | 312159590 us | }
8 us | 5) <idle>-0 | d.s4. | 312159591 us | calc_wheel_index();
9 us | 5) <idle>-0 | d.s4. | | enqueue_timer() {
9 us | 5) <idle>-0 | d.s4. | | wake_up_nohz_cpu() {
11 us | 5) <idle>-0 | d.s4. | | native_smp_send_reschedule() {
11 us | 5) <idle>-0 | d.s4. | 312171987 us | default_send_IPI_single_phys();
12408 us | 5) <idle>-0 | d.s3. | 312171990 us | }
12408 us | 5) <idle>-0 | d.s3. | 312171991 us | }
12409 us | 5) <idle>-0 | d.s3. | 312171991 us | }
Where the calculation of the time for each function was the return time
minus zero and not the time of when the function returned.
Have these tracers also save the calltime in the fgraph data section and
retrieve it again on the return to get the correct timings again.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/20250113183124.61767419@gandalf.local.home
Fixes: f1f36e22be ("ftrace: Have calltime be saved in the fgraph storage")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stefano Garzarella says:
====================
vsock: some fixes due to transport de-assignment
v1: https://lore.kernel.org/netdev/20250108180617.154053-1-sgarzare@redhat.com/
v2:
- Added patch 3 to cancel the virtio close delayed work when de-assigning
the transport
- Added patch 4 to clean the socket state after de-assigning the transport
- Added patch 5 as suggested by Michael and Hyunwoo Kim. It's based on
Hyunwoo Kim and Wongi Lee patch [1] but using WARN_ON and covering more
functions
- Added R-b/T-b tags
This series includes two patches discussed in the thread started by
Hyunwoo Kim a few weeks ago [1], plus 3 more patches added after some
discussions on v1 (see changelog). All related to the case where a vsock
socket is de-assigned from a transport (e.g., because the connect fails
or is interrupted by a signal) and then assigned to another transport
or to no-one (NULL).
I tested with usual vsock test suite, plus Michal repro [2]. (Note: the repo
works only if a G2H transport is not loaded, e.g. virtio-vsock driver).
The first patch is a fix more appropriate to the problem reported in
that thread, the second patch on the other hand is a related fix but
of a different problem highlighted by Michal Luczaj. It's present only
in vsock_bpf and already handled in af_vsock.c
The third patch is to cancel the virtio close delayed work when de-assigning
the transport, the fourth patch is to clean the socket state after de-assigning
the transport, the last patch adds warnings and prevents null-ptr-deref in
vsock_*[has_data|has_space].
Hyunwoo Kim, Michal, if you can test and report your Tested-by that
would be great!
[1] https://lore.kernel.org/netdev/Z2K%2FI4nlHdfMRTZC@v4bel-B760M-AORUS-ELITE-AX/
[2] https://lore.kernel.org/netdev/2b3062e3-bdaa-4c94-a3c0-2930595b9670@rbox.co/
====================
Link: https://patch.msgid.link/20250110083511.30419-1-sgarzare@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Transport's release() and destruct() are called when de-assigning the
vsock transport. These callbacks can touch some socket state like
sock flags, sk_state, and peer_shutdown.
Since we are reassigning the socket to a new transport during
vsock_connect(), let's reset these fields to have a clean state with
the new transport.
Fixes: c0cfa2d8a7 ("vsock: add multi-transports support")
Cc: stable@vger.kernel.org
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
During virtio_transport_release() we can schedule a delayed work to
perform the closing of the socket before destruction.
The destructor is called either when the socket is really destroyed
(reference counter to zero), or it can also be called when we are
de-assigning the transport.
In the former case, we are sure the delayed work has completed, because
it holds a reference until it completes, so the destructor will
definitely be called after the delayed work is finished.
But in the latter case, the destructor is called by AF_VSOCK core, just
after the release(), so there may still be delayed work scheduled.
Refactor the code, moving the code to delete the close work already in
the do_close() to a new function. Invoke it during destruction to make
sure we don't leave any pending work.
Fixes: c0cfa2d8a7 ("vsock: add multi-transports support")
Cc: stable@vger.kernel.org
Reported-by: Hyunwoo Kim <v4bel@theori.io>
Closes: https://lore.kernel.org/netdev/Z37Sh+utS+iV3+eb@v4bel-B760M-AORUS-ELITE-AX/
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Tested-by: Hyunwoo Kim <v4bel@theori.io>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some of the core functions can only be called if the transport
has been assigned.
As Michal reported, a socket might have the transport at NULL,
for example after a failed connect(), causing the following trace:
BUG: kernel NULL pointer dereference, address: 00000000000000a0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 12faf8067 P4D 12faf8067 PUD 113670067 PMD 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 15 UID: 0 PID: 1198 Comm: a.out Not tainted 6.13.0-rc2+
RIP: 0010:vsock_connectible_has_data+0x1f/0x40
Call Trace:
vsock_bpf_recvmsg+0xca/0x5e0
sock_recvmsg+0xb9/0xc0
__sys_recvfrom+0xb3/0x130
__x64_sys_recvfrom+0x20/0x30
do_syscall_64+0x93/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
So we need to check the `vsk->transport` in vsock_bpf_recvmsg(),
especially for connected sockets (stream/seqpacket) as we already
do in __vsock_connectible_recvmsg().
Fixes: 634f1a7110 ("vsock: support sockmap")
Cc: stable@vger.kernel.org
Reported-by: Michal Luczaj <mhal@rbox.co>
Closes: https://lore.kernel.org/netdev/5ca20d4c-1017-49c2-9516-f6f75fd331e9@rbox.co/
Tested-by: Michal Luczaj <mhal@rbox.co>
Reported-by: syzbot+3affdbfc986ecd9200fd@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/677f84a8.050a0220.25a300.01b3.GAE@google.com/
Tested-by: syzbot+3affdbfc986ecd9200fd@syzkaller.appspotmail.com
Reviewed-by: Hyunwoo Kim <v4bel@theori.io>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If the socket has been de-assigned or assigned to another transport,
we must discard any packets received because they are not expected
and would cause issues when we access vsk->transport.
A possible scenario is described by Hyunwoo Kim in the attached link,
where after a first connect() interrupted by a signal, and a second
connect() failed, we can find `vsk->transport` at NULL, leading to a
NULL pointer dereference.
Fixes: c0cfa2d8a7 ("vsock: add multi-transports support")
Cc: stable@vger.kernel.org
Reported-by: Hyunwoo Kim <v4bel@theori.io>
Reported-by: Wongi Lee <qwerty@theori.io>
Closes: https://lore.kernel.org/netdev/Z2LvdTTQR7dBmPb5@v4bel-B760M-AORUS-ELITE-AX/
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Hyunwoo Kim <v4bel@theori.io>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
gtp_newlink() links the gtp device to a list in dev_net(dev).
However, even after the gtp device is moved to another netns,
it stays on the list but should be invisible.
Let's use for_each_netdev_rcu() for netdev traversal in
gtp_genl_dump_pdp().
Note that gtp_dev_list is no longer used under RCU, so list
helpers are converted to the non-RCU variant.
Fixes: 459aa660eb ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Reported-by: Xiao Liang <shaw.leon@gmail.com>
Closes: https://lore.kernel.org/netdev/CABAhCOQdBL6h9M2C+kd+bGivRJ9Q72JUxW+-gur0nub_=PmFPA@mail.gmail.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As discussed in [0], rehash4 could be missed in udp_lib_rehash() when
udp hash4 changes while hash2 doesn't change. This patch fixes this by
moving rehash4 codes out of rehash2 checking, and then rehash2 and
rehash4 are done separately.
By doing this, we no longer need to call rehash4 explicitly in
udp_lib_hash4(), as the rehash callback in __ip4_datagram_connect takes
it. Thus, now udp_lib_hash4() returns directly if the sk is already
hashed.
Note that uhash4 may fail to work under consecutive connect(<dst
address>) calls because rehash() is not called with every connect(). To
overcome this, connect(<AF_UNSPEC>) needs to be called after the next
connect to a new destination.
[0]
https://lore.kernel.org/all/4761e466ab9f7542c68cdc95f248987d127044d2.1733499715.git.pabeni@redhat.com/
Fixes: 78c91ae2c6 ("ipv4/udp: Add 4-tuple hash for connected socket")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Link: https://patch.msgid.link/20250110010810.107145-1-lulie@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
