When imported dma-bufs are destroyed, TTM is not fully
individualizing the dma-resv, but it *is* copying the fences that
need to be waited for before declaring idle. So in the case where
the bo->resv != bo->_resv we can still drop the preempt-fences, but
make sure we do that on bo->_resv which contains the fence-pointer
copy.
In the case where the copying fails, bo->_resv will typically not
contain any fences pointers at all, so there will be nothing to
drop. In that case, TTM would have ensured all fences that would
have been copied are signaled, including any remaining preempt
fences.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Fixes: fa0af721bd ("drm/ttm: test private resv obj on release/destroy")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.16+
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Tested-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251217093441.5073-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 425fe550fb513b567bd6d01f397d274092a9c274)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
A 10ms timeslice for long-running workloads is far too long and causes
significant jitter in benchmarks when the system is shared. Adjust the
value to 5ms for preempt-fencing VMs, as the resume step there is quite
costly as memory is moved around, and set it to zero for pagefault VMs,
since switching back to pagefault mode after dma-fence mode is
relatively fast.
Also change min_run_period_ms to 'unsiged int' type rather than 's64' as
only positive values make sense.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251212182847.1683222-2-matthew.brost@intel.com
(cherry picked from commit 33a5abd9a68394aa67f9618b20eee65ee8702ff4)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The exec and vm_bind ioctl allow userspace to specify an arbitrary
num_syncs value. Without bounds checking, a very large num_syncs
can force an excessively large allocation, leading to kernel warnings
from the page allocator as below.
Introduce DRM_XE_MAX_SYNCS (set to 1024) and reject any request
exceeding this limit.
"
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1217 at mm/page_alloc.c:5124 __alloc_frozen_pages_noprof+0x2f8/0x2180 mm/page_alloc.c:5124
...
Call Trace:
<TASK>
alloc_pages_mpol+0xe4/0x330 mm/mempolicy.c:2416
___kmalloc_large_node+0xd8/0x110 mm/slub.c:4317
__kmalloc_large_node_noprof+0x18/0xe0 mm/slub.c:4348
__do_kmalloc_node mm/slub.c:4364 [inline]
__kmalloc_noprof+0x3d4/0x4b0 mm/slub.c:4388
kmalloc_noprof include/linux/slab.h:909 [inline]
kmalloc_array_noprof include/linux/slab.h:948 [inline]
xe_exec_ioctl+0xa47/0x1e70 drivers/gpu/drm/xe/xe_exec.c:158
drm_ioctl_kernel+0x1f1/0x3e0 drivers/gpu/drm/drm_ioctl.c:797
drm_ioctl+0x5e7/0xc50 drivers/gpu/drm/drm_ioctl.c:894
xe_drm_ioctl+0x10b/0x170 drivers/gpu/drm/xe/xe_device.c:224
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:598 [inline]
__se_sys_ioctl fs/ioctl.c:584 [inline]
__x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:584
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xbb/0x380 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
"
v2: Add "Reported-by" and Cc stable kernels.
v3: Change XE_MAX_SYNCS from 64 to 1024. (Matt & Ashutosh)
v4: s/XE_MAX_SYNCS/DRM_XE_MAX_SYNCS/ (Matt)
v5: Do the check at the top of the exec func. (Matt)
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Reported-by: Koen Koning <koen.koning@intel.com>
Reported-by: Peter Senna Tschudin <peter.senna@linux.intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6450
Cc: <stable@vger.kernel.org> # v6.12+
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Cc: Carl Zhang <carl.zhang@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Ivan Briano <ivan.briano@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251205234715.2476561-5-shuicheng.lin@intel.com
(cherry picked from commit b07bac9bd708ec468cd1b8a5fe70ae2ac9b0a11c)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Pass character "0" rather than NULL terminator to properly format
queue restoration SMI events. Currently, the NULL terminator precedes
the newline character that is intended to delineate separate events
in the SMI event buffer, which can break userspace parsers.
Signed-off-by: Brian Kocoloski <brian.kocoloski@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6e7143e5e6e21f9d5572e0390f7089e6d53edf3c)
User-configured SCLK(GPU core clock)frequencies were not persisting
across S0ix suspend/resume cycles on smu v14 hardware.
The issue occurred because of the code resetting clock frequency
to zero during resume.
This patch addresses the problem by:
- Preserving user-configured values in driver and sets the
clock frequency across resume
- Preserved settings are sent to the hardware during resume
Signed-off-by: mythilam <mythilam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 20ba98326f4c69e6bf8d1f42942ece485a675b27)
[why]
need to enable APG_CLOCK_ENABLE enable first
also need to wake up az from D3 before access az block
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bf5e396957acafd46003318965500914d5f4edfa)
During GT reset recovery in do_gt_restart(), xe_uc_start() was called
before xe_reg_sr_apply_mmio() restored engine-specific registers. This
created a race window where the scheduler could run jobs before hardware
state was fully restored.
This caused failures in eudebug tests (xe_exec_sip_eudebug@breakpoint-
waitsip-*) where TD_CTL register (containing TD_CTL_GLOBAL_DEBUG_ENABLE)
wasn't restored before jobs started executing. Breakpoints would fail to
trigger SIP entry because the debug enable bit wasn't set yet.
Fix by moving xe_uc_start() after all MMIO register restoration,
including engine registers and CCS mode configuration, ensuring all
hardware state is fully restored before any jobs can be scheduled.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Jan Maslak <jan.maslak@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251210145618.169625-2-jan.maslak@intel.com
(cherry picked from commit 825aed0328588b2837636c1c5a0c48795d724617)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
MEI GSC interrupt comes from i915 or xe driver. It has top half and
bottom half. Top half is called from i915/xe interrupt handler. It
should be in irq disabled context.
With RT kernel(PREEMPT_RT enabled), by default IRQ handler is in
threaded IRQ. MEI GSC top half might be in threaded IRQ context.
generic_handle_irq_safe API could be called from either IRQ or
process context, it disables local IRQ then calls MEI GSC interrupt
top half.
This change fixes B580 GPU boot issue with RT enabled.
Fixes: e02cea83d3 ("drm/xe/gsc: add Battlemage support")
Tested-by: Baoli Zhang <baoli.zhang@intel.com>
Signed-off-by: Junxiao Chang <junxiao.chang@intel.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251107033152.834960-1-junxiao.chang@intel.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
(cherry picked from commit 3efadf028783a49ab2941294187c8b6dd86bf7da)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
If wait for ring space started just before migration, it can delay
the recovery process, by waiting without bailout path for up to 2
seconds.
Two second wait for recovery is not acceptable, and if the ring was
completely filled even without the migration temporarily stopping
execution, then such a wait will result in up to a thousand new jobs
(assuming constant flow) being added while the wait is happening.
While this will not cause data corruption, it will lead to warning
messages getting logged due to reset being scheduled on a GT under
recovery. Also several seconds of unresponsiveness, as the backlog
of jobs gets progressively executed.
Add a bailout condition, to make sure the recovery starts without
much delay. The recovery is expected to finish in about 100 ms when
under moderate stress, so the condition verification period needs to be
below that - settling at 64 ms.
The theoretical max time which the recovery can take depends on how
many requests can be emitted to engine rings and be pending execution.
While stress testing, it was possible to reach 10k pending requests
on rings when a platform with two GTs was used. This resulted in max
recovery time of 5 seconds. But in real life situations, it is very
unlikely that the amount of pending requests will ever exceed 100,
and for that the recovery time will be around 50 ms - well within our
claimed limit of 100ms.
Fixes: a4dae94aad ("drm/xe/vf: Wakeup in GuC backend on VF post migration recovery")
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251204200820.2206168-1-tomasz.lis@intel.com
(cherry picked from commit a00e305fba02a915cf2745bf6ef3f55537e65d57)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The Xe driver fails to build when CONFIG_DRM_XE_GPUSVM is disabled
but CONFIG_DRM_GPUSVM is turned on, due to the clash of two commits:
In file included from drivers/gpu/drm/xe/xe_vm_madvise.c:8:
drivers/gpu/drm/xe/xe_svm.h: In function 'xe_svm_init':
include/linux/stddef.h:8:14: error: passing argument 5 of 'drm_gpusvm_init' makes integer from pointer without a cast [-Wint-conversion]
drivers/gpu/drm/xe/xe_svm.h:217:38: note: in expansion of macro 'NULL'
217 | NULL, NULL, 0, 0, 0, NULL, NULL, 0);
| ^~~~
In file included from drivers/gpu/drm/xe/xe_bo_types.h:11,
from drivers/gpu/drm/xe/xe_bo.h:11,
from drivers/gpu/drm/xe/xe_vm_madvise.c:11:
include/drm/drm_gpusvm.h:254:35: note: expected 'long unsigned int' but argument is of type 'void *'
254 | unsigned long mm_start, unsigned long mm_range,
| ~~~~~~~~~~~~~~^~~~~~~~
In file included from drivers/gpu/drm/xe/xe_vm_madvise.c:14:
drivers/gpu/drm/xe/xe_svm.h:216:16: error: too many arguments to function 'drm_gpusvm_init'; expected 10, have 11
216 | return drm_gpusvm_init(&vm->svm.gpusvm, "Xe SVM (simple)", &vm->xe->drm,
| ^~~~~~~~~~~~~~~
217 | NULL, NULL, 0, 0, 0, NULL, NULL, 0);
| ~
include/drm/drm_gpusvm.h:251:5: note: declared here
Adapt the caller to the new argument list by removing the extraneous
NULL argument.
Fixes: 9e97874148 ("drm/xe/userptr: replace xe_hmm with gpusvm")
Fixes: 10aa5c8060 ("drm/gpusvm, drm/xe: Fix userptr to not allow device private pages")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251204094704.1030933-1-arnd@kernel.org
(cherry picked from commit 29bce9c8b41d5c378263a927acb9a9074d0e7a0e)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Pull in rc1 to include all changes since the merge window closed,
and grab all fixes and changes from drm/drm-next.
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Pull SCSI fixes from James Bottomley:
"The only core fix is in doc; all the others are in drivers, with the
biggest impacts in libsas being the rollback on error handling and in
ufs coming from a couple of error handling fixes, one causing a crash
if it's activated before scanning and the other fixing W-LUN
resumption"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: qcom: Fix confusing cleanup.h syntax
scsi: libsas: Add rollback handling when an error occurs
scsi: device_handler: Return error pointer in scsi_dh_attached_handler_name()
scsi: ufs: core: Fix a deadlock in the frequency scaling code
scsi: ufs: core: Fix an error handler crash
scsi: Revert "scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed"
scsi: ufs: core: Fix RPMB link error by reversing Kconfig dependencies
scsi: qla4xxx: Use time conversion macros
scsi: qla2xxx: Enable/disable IRQD_NO_BALANCING during reset
scsi: ipr: Enable/disable IRQD_NO_BALANCING during reset
scsi: imm: Fix use-after-free bug caused by unfinished delayed work
scsi: target: sbp: Remove KMSG_COMPONENT macro
scsi: core: Correct documentation for scsi_device_quiesce()
scsi: mpi3mr: Prevent duplicate SAS/SATA device entries in channel 1
scsi: target: Reset t_task_cdb pointer in error case
scsi: ufs: core: Fix EH failure after W-LUN resume error
Pull ceph updates from Ilya Dryomov:
"We have a patch that adds an initial set of tracepoints to the MDS
client from Max, a fix that hardens osdmap parsing code from myself
(marked for stable) and a few assorted fixups"
* tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client:
rbd: stop selecting CRC32, CRYPTO, and CRYPTO_AES
ceph: stop selecting CRC32, CRYPTO, and CRYPTO_AES
libceph: make decode_pool() more resilient against corrupted osdmaps
libceph: Amend checking to fix `make W=1` build breakage
ceph: Amend checking to fix `make W=1` build breakage
ceph: add trace points to the MDS client
libceph: fix log output race condition in OSD client
Pull tomoyo update from Tetsuo Handa:
"Trivial optimization"
* tag 'tomoyo-pr-20251212' of git://git.code.sf.net/p/tomoyo/tomoyo:
tomoyo: Use local kmap in tomoyo_dump_page()
Pull CPU hotplug fix from Ingo Molnar:
- Fix CPU hotplug callbacks to disable interrupts on UP kernels
* tag 'smp-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Make atomic hotplug callbacks run with interrupts disabled on UP
Pull irq fixes from Ingo Molnar:
- Fix error code in the irqchip/mchp-eic driver
- Fix setup_percpu_irq() affinity assumptions
- Remove the unused irq_domain_add_tree() function
* tag 'irq-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mchp-eic: Fix error code in mchp_eic_domain_alloc()
irqdomain: Delete irq_domain_add_tree()
genirq: Allow NULL affinity for setup_percpu_irq()
Pull misc core fixes from Ingo Molnar:
- Improve bug reporting
- Suppress W=1 format warning
- Improve rseq scalability on Clang builds
* tag 'core-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Always inline rseq_debug_syscall_return()
bug: Hush suggest-attribute=format for __warn_printf()
bug: Let report_bug_entry() provide the correct bugaddr
Pull misc updates from Andrew Morton:
"There are no significant series in this small merge. Please see the
individual changelogs for details"
[ Editor's note: it's mainly ocfs2 and a couple of random fixes ]
* tag 'mm-nonmm-stable-2025-12-11-11-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: memfd_luo: add CONFIG_SHMEM dependency
mm: shmem: avoid build warning for CONFIG_SHMEM=n
ocfs2: fix memory leak in ocfs2_merge_rec_left()
ocfs2: invalidate inode if i_mode is zero after block read
ocfs2: avoid -Wflex-array-member-not-at-end warning
ocfs2: convert remaining read-only checks to ocfs2_emergency_state
ocfs2: add ocfs2_emergency_state helper and apply to setattr
checkpatch: add uninitialized pointer with __free attribute check
args: fix documentation to reflect the correct numbers
ocfs2: fix kernel BUG in ocfs2_find_victim_chain
liveupdate: luo_core: fix redundant bound check in luo_ioctl()
ocfs2: validate inline xattr size and entry count in ocfs2_xattr_ibody_list
fs/fat: remove unnecessary wrapper fat_max_cache()
ocfs2: replace deprecated strcpy with strscpy
ocfs2: check tl_used after reading it from trancate log inode
liveupdate: luo_file: don't use invalid list iterator
Pull more MM updates from Andrew Morton:
- "powerpc/pseries/cmm: two smaller fixes" (David Hildenbrand)
fixes a couple of minor things in ppc land
- "Improve folio split related functions" (Zi Yan)
some cleanups and minorish fixes in the folio splitting code
* tag 'mm-stable-2025-12-11-11-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/damon/tests/core-kunit: avoid damos_test_commit stack warning
mm: vmscan: correct nr_requested tracing in scan_folios
MAINTAINERS: add idr core-api doc file to XARRAY
mm/hugetlb: fix incorrect error return from hugetlb_reserve_pages()
mm: fix CONFIG_STACK_GROWSUP typo in mm.h
mm/huge_memory: fix folio split stats counting
mm/huge_memory: make min_order_for_split() always return an order
mm/huge_memory: replace can_split_folio() with direct refcount calculation
mm/huge_memory: change folio_split_supported() to folio_check_splittable()
mm/sparse: fix sparse_vmemmap_init_nid_early definition without CONFIG_SPARSEMEM
powerpc/pseries/cmm: adjust BALLOON_MIGRATE when migrating pages
powerpc/pseries/cmm: call balloon_devinfo_init() also without CONFIG_BALLOON_COMPACTION
Brown paper bag time. This is a silly oversight where I missed to drop
the error condition checking to ensure we clean up on early error
returns. I have an internal unit testset coming up for this which will
catch all such issues going forward.
Reported-by: Chris Mason <clm@fb.com>
Reported-by: Jeff Layton <jlayton@kernel.org>
Fixes: 011703a9ac ("file: add FD_{ADD,PREPARE}()")
Signed-off-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 7bfe3b8ea6 ("Drivers: hv: Introduce mshv_vtl driver") added a
new generated header file for the offsets into the mshv_vtl_cpu_context
structure to be used by the low-level assembly code. But it didn't add
the .gitignore file to go with it, so 'git status' and friends will
mention it.
Let's add the gitignore file before somebody thinks that generated
header should be committed.
Fixes: 7bfe3b8ea6 ("Drivers: hv: Introduce mshv_vtl driver")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull more drm fixes from Dave Airlie:
"These are the enqueued fixes that ended up in our fixes branch,
nouveau mostly, along with some small fixes in other places.
plane:
- Handle IS_ERR vs NULL in drm_plane_create_hotspot_properties()
ttm:
- fix devcoredump for evicted bos
panel:
- Fix stack usage warning in novatek-nt35560
nouveau:
- alloc fwsec sb at boot to avoid s/r problems
- fix strcpy usage
- fix i2c encoder crash
bridge:
- Ignore spurious PLL_UNLOCK bit in ti-sn65dsi83
mgag200:
- Fix bigendian handling in mgag200
tilcdc:
- Fix probe failure in tilcdc"
* tag 'drm-fixes-2025-12-13' of https://gitlab.freedesktop.org/drm/kernel:
drm/mgag200: Fix big-endian support
drm/tilcdc: Fix removal actions in case of failed probe
drm/ttm: Avoid NULL pointer deref for evicted BOs
drm: nouveau: Replace sprintf() with sysfs_emit()
drm/nouveau: fix circular dep oops from vendored i2c encoder
drm/nouveau: refactor deprecated strcpy
drm/plane: Fix IS_ERR() vs NULL check in drm_plane_create_hotspot_properties()
drm/bridge: ti-sn65dsi83: ignore PLL_UNLOCK errors
drm/nouveau/gsp: Allocate fwsec-sb at boot
drm/panel: novatek-nt35560: avoid on-stack device structure
Pull drm fixes from Dave Airlie:
"This is the weekly fixes for what is in next tree, mostly amdgpu and
some i915, panthor and a core revert.
core:
- revert dumb bo 8 byte alignment
amdgpu:
- SI fix
- DC reduce stack usage
- HDMI fixes
- VCN 4.0.5 fix
- DP MST fix
- DC memory allocation fix
amdkfd:
- SVM fix
- Trap handler fix
- VGPR fixes for GC 11.5
i915:
- Fix format string truncation warning
- FIx runtime PM reference during fbdev BO creation
panthor:
- fix UAF
renesas:
- fix sync flag handling"
* tag 'drm-next-2025-12-13' of https://gitlab.freedesktop.org/drm/kernel:
Revert "drm/amd/display: Fix pbn to kbps Conversion"
drm/amd: Fix unbind/rebind for VCN 4.0.5
drm/i915: Fix format string truncation warning
drm/i915/fbdev: Hold runtime PM ref during fbdev BO creation
drm/amd/display: Improve HDMI info retrieval
drm/amdkfd: bump minimum vgpr size for gfx1151
drm/amd/display: shrink struct members
drm/amdkfd: Export the cwsr_size and ctl_stack_size to userspace
drm/amd/display: Refactor dml_core_mode_support to reduce stack frame
drm/amdgpu: don't attach the tlb fence for SI
drm/amd/display: Use GFP_ATOMIC in dc_create_plane_state()
drm/amdkfd: Trap handler support for expert scheduling mode
drm/amdkfd: Use huge page size to check split svm range alignment
drm/rcar-du: dsi: Handle both DRM_MODE_FLAG_N.SYNC and !DRM_MODE_FLAG_P.SYNC
drm/gem-shmem: revert the 8-byte alignment constraint
drm/gem-dma: revert the 8-byte alignment constraint
drm/panthor: Prevent potential UAF in group creation
Pull further i3c update from Alexandre Belloni:
"We are removing a legacy API callback and having this sooner rather
than later will help ensuring no one introduces a new driver using it.
I've also added patches removing the "__free(...) = NULL" pattern
because I'm sure we won't avoid people sending those following the
mailing list discussion..."
* tag 'i3c/for-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: adi: Fix confusing cleanup.h syntax
i3c: master: Fix confusing cleanup.h syntax
i3c: master: cleanup callback .priv_xfers()
i3c: master: switch to use new callback .i3c_xfers() from .priv_xfers()
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- stop setting max_user_freq from the individual drivers as this has
not been hardware related for a while
New drivers:
- Andes ATCRTC100
- Apple SMC
- Nvidia VRS
Drivers:
- renesas-rtca3: add RZ/V2H support
- tegra: add ACPI support"
* tag 'rtc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits)
rtc: spacemit: MFD_SPACEMIT_P1 as dependencies
rtc: atcrtc100: Fix signedness bug in probe()
rtc: max31335: Fix ignored return value in set_alarm
rtc: gamecube: Check the return value of ioremap()
Documentation: ABI: testing: Fix "upto" typo in rtc-cdev
rtc: Add new rtc-macsmc driver for Apple Silicon Macs
dt-bindings: rtc: Add Apple SMC RTC
MAINTAINERS: drop unneeded file entry in NVIDIA VRS RTC DRIVER
rtc: isl12026: Add id_table
rtc: renesas-rtca3: Add support for multiple reset lines
dt-bindings: rtc: renesas,rz-rtca3: Add RZ/V2H support
rtc: tegra: Replace deprecated SIMPLE_DEV_PM_OPS
rtc: tegra: Add ACPI support
rtc: tegra: Use devm_clk_get_enabled() in probe
rtc: Kconfig: add MC34708 to mc13xxx help text
rtc: s35390a: use u8 instead of char for register buffer
rtc: nvvrs: add NVIDIA VRS RTC device driver
dt-bindings: rtc: Document NVIDIA VRS RTC
rtc: atcrtc100: Add ATCRTC100 RTC driver
MAINTAINERS: Add entry for ATCRTC100 RTC driver
...
