Userspace may leave predication enabled upon return from the batch
buffer, which has the consequent of preventing all operation from the
ring from being executed, including all the synchronisation, coherency
control, arbitration and user signaling. This is more than just a local
gpu hang in one client, as the user has the ability to prevent the
kernel from applying critical workarounds and can cause a full GT reset.
We could simply execute MI_SET_PREDICATE upon return from the user
batch, but this has the repercussion of modifying the user's context
state. Instead, we opt to execute a fixup batch which by mixing
predicated operations can determine the state of the
SET_PREDICATE_RESULT register and restore it prior to the next userspace
batch. This allows us to protect the kernel's ring without changing the
uABI.
Suggested-by: Zbigniew Kempczynski <zbigniew.kempczynski@intel.com>
Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Cc: Zbigniew Kempczynski <zbigniew.kempczynski@intel.com>
Cc: Thomas Hellstrom <thomas.hellstrom@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220425152317.4275-4-ramalingam.c@intel.com
When bit 19 of MI_LOAD_REGISTER_IMM instruction opcode is set on tgl+
devices, HW does not care about certain register address offsets, but
instead check the following for valid address ranges on specific engines:
RCS && CCS: BITS(0 - 10)
BCS: BITS(0 - 11)
VECS && VCS: BITS(0 - 13)
Also, tgl+ now support relative addressing for BCS engine - So, this
patch fixes issue with live_gt_lrc selftest that is failing where there is
mismatch between LRC register layout generated during init and HW
default register offsets.
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220425152317.4275-2-ramalingam.c@intel.com
In order to get the GSC Support merged on drm-intel-gt-next
in a clean fashion we needed this ATS-M patch to avoid
conflict in i915_pci.c:
commit 412c942bdf ("drm/i915/ats-m: add ATS-M platform info")
--
Fixing a silent conflict on drivers/gpu/drm/i915/gt/intel_gt_gmch.c:
- if (!intel_vtd_active(i915))
+ if (!i915_vtd_active(i915))
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Initiating a reset when the command streamer is not idle or in the
middle of executing an MI_FORCE_WAKE can result in a hang. Multiple
command streamers can be part of a single reset domain, so resetting one
would mean resetting all command streamers in that domain.
To workaround this, before initiating a reset, ensure that all command
streamers within that reset domain are either IDLE or are not executing
a MI_FORCE_WAKE.
Enable GuC PRE_PARSER WA bit so that GuC follows the WA sequence when
initiating engine-resets.
For gt-resets, ensure that i915 applies the WA sequence.
Opens to address in future patches:
- The part of the WA to wait for pending forcewakes is also applicable
to execlists backend.
- The WA also needs to be applied for gen11
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220415224025.3693037-3-umesh.nerlige.ramappa@intel.com
Newer platforms have DSS that aren't necessarily available for both
geometry and compute, two queries will need to exist. This introduces
the first, when passing a valid engine class and engine instance in the
flags returns a topology describing geometry.
Based on past discussion, we currently only support this new query item
on Xe_HP and beyond; earlier platforms do not need to worry about
geometry and compute pipelines having access to different topology and
should continue to use the existing topology query.
v2: fix white space errors
v3: change flags from hosting 2 8 bit numbers to holding a
i915_engine_class_instance struct
v4: add error if non rcs engine passed.
v5 (by MattR):
- Improve kerneldoc and cross references to related structs/enums.
(Daniel)
- Clarify that geometry query is only supported on render engines
(Francisco)
- Clarify that the new query is only supported on Xe_HP+.
- Fix checkpatch warnings.
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Francisco Jerez <currojerez@riseup.net>
UMD (mesa): https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14143
Testcase: igt@i915_query@test-query-geometry-subslices
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414192230.749771-4-matthew.d.roper@intel.com
The latest GuC firmware drops the context descriptor pool in favour of
passing all creation data in the create H2G. It also greatly simplifies
the work queue and removes the process descriptor used for multi-LRC
submission. So, remove all mention of LRC and process descriptors and
update the registration code accordingly.
Unfortunately, the new API also removes the ability to set default
values for the scheduling policies at context registration time.
Instead, a follow up H2G must be sent. The individual scheduling
policy update H2G commands are also dropped in favour of a single KLV
based H2G. So, change the update wrappers accordingly and call this
during context registration..
Of course, this second H2G per registration might fail due to being
backed up. The registration code has a complicated state machine to
cope with the actual registration call failing. However, if that works
then there is no support for unwinding if a further call should fail.
Unwinding would require sending a H2G to de-register - but that can't
be done because the CTB is already backed up.
So instead, add a new flag to say whether the context has a pending
policy update. This is set if the policy H2G fails at registration
time. The submission code checks for this flag and retries the policy
update if set. If that call fails, the submission path early exists
with a retry error. This is something that is already supported for
other reasons.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220412225955.1802543-2-John.C.Harrison@Intel.com
When we are swapping out the local memory obj on flat-ccs capable platform,
we need to capture the ccs data too along with main meory and we need to
restore it when we are swapping in the content.
When lmem object is swapped into a smem obj, smem obj will
have the extra pages required to hold the ccs data corresponding to the
lmem main memory. So main memory of lmem will be copied into the initial
pages of the smem and then ccs data corresponding to the main memory
will be copied to the subsequent pages of smem. ccs data is 1/256 of
lmem size.
Swapin happens exactly in reverse order. First main memory of lmem is
restored from the smem's initial pages and the ccs data will be restored
from the subsequent pages of smem.
Extracting and restoring the CCS data is done through a special cmd called
XY_CTRL_SURF_COPY_BLT
v2: Fixing the ccs handling
v3: Handle the ccs data at same loop as main memory [Thomas]
v4: changes for emit_copy_ccs
v5: handle non-flat-ccs scenario
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405150840.29351-10-ramalingam.c@intel.com
On Xe-HP and later devices, dedicated compression control state (CCS)
stored in local memory is used for each surface, to support the
3D and media compression formats.
The memory required for the CCS of the entire local memory is 1/256 of
the local memory size. So before the kernel boot, the required memory
is reserved for the CCS data and a secure register will be programmed
with the CCS base address
So when an object is allocated in local memory, dont need to explicitly
allocate the space for ccs data. But when the obj is evicted into the
smem, to hold the compression related data along with the obj extra space
is needed in smem. i.e obj_size + (obj_size/256).
Hence when a smem pages are allocated for an obj with lmem placement
possibility we create with the extra pages required for the ccs data for
the obj size.
v2:
Used imperative wording [Thomas]
v3:
Inflate the pages only when obj's placement is lmem only
v4:
GEM_BUG_ON if the ttm->num_pages > obj page size [Thomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
cc: Christian Koenig <christian.koenig@amd.com>
cc: Hellstrom Thomas <thomas.hellstrom@intel.com>
Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405150840.29351-9-ramalingam.c@intel.com
Xe-HP and latest devices support Flat CCS which reserved a portion of
the device memory to store compression metadata, during the clearing of
device memory buffer object we also need to clear the associated
CCS buffer.
XY_CTRL_SURF_COPY_BLT is a BLT cmd used for reading and writing the
ccs surface of a lmem memory. So on Flat-CCS capable platform we use
XY_CTRL_SURF_COPY_BLT to clear the CCS meta data.
v2: Fixed issues with platform naming [Lucas]
v3: Rebased [Ram]
Used the round_up funcs [Bob]
v4: Fixed ccs blk calculation [Ram]
Added Kdoc on flat-ccs.
v5: GENMASK is used [Matt]
mocs fix [Matt]
Comments Fix [Matt]
Flush address programming [Ram]
v6: FLUSH_DW is fixed
Few coding style fix
v7: Adopting the XY_FAST_COLOR_BLT (Thomas]
v8: XY_CTRL_SURF_COPY_BLT for ccs clearing.
v9: emit_copy_ccs is used.
v10: ctrl_surf cmds are filled in caller itself. [Thomas]
only one ctrl surf cmd is used as size of lmem is <=8M [Thomas]
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Ayaz A Siddiqui <ayaz.siddiqui@intel.com>
Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220405150840.29351-6-ramalingam.c@intel.com
