Even though the SP804 binding allows to specify only one clock, the
primecell driver requires a named clock to activate the bus clock.
Specify the one clock three times and provide some clock-names, to
make the DT match the SP804 and primecell binding.
Link: https://lore.kernel.org/r/20200907121831.242281-3-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Even though the SP804 binding allows to specify only one clock, the
primecell driver requires a named clock to activate the bus clock.
Specify the one clock three times and provide some clock-names, to
make the DT match the SP804 and primecell binding.
Also add the missing arm,primecell compatible string.
Link: https://lore.kernel.org/r/20200907121831.242281-4-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
The SP805 DT binding requires two clocks to be specified, but the two
LG platform DTs currently only specify one clock.
In practice, Linux would pick a clock named "apb_pclk" for the bus
clock, and the Linux (and U-Boot) SP805 driver would use the first clock
to derive the actual watchdog counter frequency.
Since currently both are the very same clock, we can just double the
clock reference, and add the correct clock-names, to match the binding.
Link: https://lore.kernel.org/r/20200907121831.242281-6-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Chanho Min <chanho.min@lge.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Since we now have support for the interrupt controller pm_uart's
interrupt is routed through it make sense to wire up it's interrupt
in the device tree.
The interrupt is the same for all known chips so it goes in the
base dtsi.
Link: https://lore.kernel.org/r/20201002133418.2250277-4-daniel@0x0f.com
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
ARM: DT: Hisilicon ARM32 SoCs DT updates for 5.10 (take two)
- Fix the system controller compatible for the hi3620 and hip04 SoCs
- Add the basic device tree for the hisilicon SD5203 SoC
* tag 'hisi-arm32-dt-for-5.10-tag2' of git://github.com/hisilicon/linux-hisi:
ARM: dts: hisilicon: add SD5203 dts
ARM: dts: hisilicon: fix the system controller compatible nodes
Link: https://lore.kernel.org/r/5F742717.5080405@hisilicon.com
Signed-off-by: Olof Johansson <olof@lixom.net>
More dts changes for omaps for v5.10 merge window
Some more dts changes that did not make it to the first set of
dts changes:
- Drop unnessary nokia,nvm-size property
- A series of changes to use "okay" instead of "ok"
- A series of changes to move boards to use new cpsw switch
driver and drop the drop legacy cpsw dt node
- A series of changes to fix issues with the GPIO binding
usage
* tag 'omap-for-v5.10/dt-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am3874: iceboard: fix GPIO expander reset GPIOs
ARM: dts: am335x: t335: align GPIO hog names with dtschema
ARM: dts: am335x: lxm: fix PCA9539 GPIO expander properties
ARM: dts: am437x-l4: drop legacy cpsw dt node
ARM: dts: am437x: switch to new cpsw switch drv
ARM: dts: am437x-l4: add dt node for new cpsw switchdev driver
ARM: dts: dra7: drop legacy cpsw dt node
ARM: dts: am57xx-cl-som-am57x: switch to new cpsw switch drv
ARM: dts: dra7x-evm: switch to new cpsw switch drv
ARM: dts: beagle-x15: switch to new cpsw switch drv
ARM: dts: am57xx-idk: switch to new cpsw switch drv
ARM: dts: am5729: beagleboneai: switch to new cpsw switch drv
ARM: dts: am43xx: replace status value "ok" by "okay"
ARM: dts: dra7xx: replace status value "ok" by "okay"
ARM: dts: omap: replace status value "ok" by "okay"
ARM: dts: n9, n950: Remove nokia,nvm-size property
Link: https://lore.kernel.org/r/pull-1601445968-476435@atomide.com-2
Signed-off-by: Olof Johansson <olof@lixom.net>
A few more DT patches for 5.10, to support simple-framebuffer on the v3s
and the pinecube board
* tag 'sunxi-dt-for-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: dts: sun8i: v3s: Add simple-framebuffer
ARM: dts: sun8i: s3l: add support for Pine64 PineCube IP camera
dt-bindings: arm: sunxi: add Pine64 PineCube binding
ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for I2C1 at PE bank
ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for 8-bit parallel CSI
ARM: dts: sun8i: V3/V3s/S3/S3L: add CSI1 device node
ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for UART2 RX/TX
ARM: dts: sun8i: V3/V3s/S3/S3L: add Ethernet support
Link: https://lore.kernel.org/r/e7c12b59-8603-438d-908b-5f0bde2c8697.lettre@localhost
Signed-off-by: Olof Johansson <olof@lixom.net>
cpu-supply fixes (supply for each cpu core not only cpu0)
and a spelling for the status property.
* tag 'v5.10-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: replace status value "ok" by "okay"
ARM: dts: rockchip: update cpu supplies on rk3066a
ARM: dts: rockchip: rk3066a: add label to cpu@1
ARM: dts: rockchip: update cpu supplies on rk3288
Link: https://lore.kernel.org/r/1834049.gShM3QRH0n@diego
Signed-off-by: Olof Johansson <olof@lixom.net>
Actions Semi ARM64 DT for v5.10:
- Fix the memory region used by pinctrl and sps drivers on the S700 SoC.
The issue is fixed by limiting the address space used by pinctrl driver.
In hardware these two are separate subsystems but the hw engineers somehow
merged the registers space into one. So we now limit the address space with
appropriate offsets for the two drivers.
- Add DMA controller support for S700 SoC. The relevant driver changes are
picked up by DMA Engine mainatainer. The DMA on this SoC can be used for
mem-to-mem and mem-to-peripheral transfers.
* tag 'actions-arm64-dt-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions:
arm64: dts: actions: Add DMA Controller for S700
arm64: dts: actions: limit address range for pinctrl node
Link: https://lore.kernel.org/r/20200922114030.GC11251@Mani-XPS-13-9360
Signed-off-by: Olof Johansson <olof@lixom.net>
Actions Semi ARM DT for v5.10:
- Add devicetree support for Caninos Loucos Labrador SBC manufactured
by Laboratory of Integrated Technological Systems (LSI-TEC), Brazil.
This board is based on Actions Semi S500 SoC. More information about
this board can be found in their website: https://caninosloucos.org/en/
- Fix PPI interrupt specifiers for peripherals attached to Cortex-A9 CPU
- Add devicetree support for RoseapplePi SBC manufactured by Roseapple Pi
team in Taiwan. This board is based on Actions Semi S500 SoC.
More information about this board can be found in their website:
http://roseapplepi.org/
* tag 'actions-arm-dt-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions:
ARM: dts: owl-s500: Add RoseapplePi
ARM: dts: owl-s500: Fix incorrect PPI interrupt specifiers
ARM: dts: Add Caninos Loucos Labrador v2
Link: https://lore.kernel.org/r/20200922113712.GB11251@Mani-XPS-13-9360
Signed-off-by: Olof Johansson <olof@lixom.net>
Actions Semi bindings for v5.10
- Add vendor prefix for Roseapple Pi: http://roseapplepi.org/
- Document RoseapplePi SBC manufactured by Roseapple Pi team in Taiwan.
This board is based on Actions Semi S500 SoC. More information about
this board can be found in their website:
http://roseapplepi.org/index.php/spec/
- Add vendor prefix for Caninos Loucos Program:
https://caninosloucos.org/en/program-en/
- Document Caninos Loucos Labrador SBC manufactured by Laboratory of
Integrated Technological Systems (LSI-TEC), Brazil. This board is based
on Actions Semi S500 SoC. More information about this board can be found
in their website: https://caninosloucos.org/en/labrador-32-en/
* tag 'actions-bindings-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions:
dt-bindings: arm: actions: Document RoseapplePi
dt-bindings: Add vendor prefix for RoseapplePi.org
dt-bindings: arm: actions: Document Caninos Loucos Labrador
dt-bindings: Add vendor prefix for Caninos Loucos
Link: https://lore.kernel.org/r/20200922113408.GA11251@Mani-XPS-13-9360
Signed-off-by: Olof Johansson <olof@lixom.net>
The 3.10 vendor kernel defines the following GPU 20 interrupt lines:
#define INT_MALI_GP AM_IRQ(160)
#define INT_MALI_GP_MMU AM_IRQ(161)
#define INT_MALI_PP AM_IRQ(162)
#define INT_MALI_PMU AM_IRQ(163)
#define INT_MALI_PP0 AM_IRQ(164)
#define INT_MALI_PP0_MMU AM_IRQ(165)
#define INT_MALI_PP1 AM_IRQ(166)
#define INT_MALI_PP1_MMU AM_IRQ(167)
#define INT_MALI_PP2 AM_IRQ(168)
#define INT_MALI_PP2_MMU AM_IRQ(169)
#define INT_MALI_PP3 AM_IRQ(170)
#define INT_MALI_PP3_MMU AM_IRQ(171)
#define INT_MALI_PP4 AM_IRQ(172)
#define INT_MALI_PP4_MMU AM_IRQ(173)
#define INT_MALI_PP5 AM_IRQ(174)
#define INT_MALI_PP5_MMU AM_IRQ(175)
#define INT_MALI_PP6 AM_IRQ(176)
#define INT_MALI_PP6_MMU AM_IRQ(177)
#define INT_MALI_PP7 AM_IRQ(178)
#define INT_MALI_PP7_MMU AM_IRQ(179)
However, the driver from the 3.10 vendor kernel does not use the
following four interrupt lines:
- INT_MALI_PP3
- INT_MALI_PP3_MMU
- INT_MALI_PP7
- INT_MALI_PP7_MMU
Drop the "pp3" and "ppmmu3" interrupt lines. This is also important
because there is no matching entry in interrupt-names for it (meaning
the "pp2" interrupt is actually assigned to the "pp3" interrupt line).
Fixes: 7d3f6b536e ("ARM: dts: meson8: add the Mali-450 MP6 GPU")
Reported-by: Thomas Graichen <thomas.graichen@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: thomas graichen <thomas.graichen@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20200815181957.408649-1-martin.blumenstingl@googlemail.com
The board uses lane 3 of SERDES for USB. Set the mux
accordingly.
The USB controller and EVM supports super-speed for USB0
on the Type-C port. However, the SERDES has a limitation
that upto 2 protocols can be used at a time. The SERDES is
wired for PCIe, QSGMII and USB super-speed. It has been
chosen to use PCI2 and QSGMII as default. So restrict
USB0 to high-speed mode.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200930122032.23481-7-rogerq@ti.com
First two lanes of SERDES is connected to PCIe, third lane is
connected to QSGMII and the last lane is connected to USB. However,
Cadence torrent SERDES doesn't support more than 2 protocols
at the same time. Configure it only for PCIe and QSGMII.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200930122032.23481-6-rogerq@ti.com
The DT binding for Hisilicon system controllers require to have a
"syscon" compatible string.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
DT binding permits only one compatible string which was decribed in past by
commit 63cab195bf ("i2c: removed work arounds in i2c driver for Zynq
Ultrascale+ MPSoC").
The commit aea37006e1 ("dt-bindings: i2c: cadence: Migrate i2c-cadence
documentation to YAML") has converted binding to yaml and the following
issues is reported:
...: i2c@ff030000: compatible: Additional items are not allowed
('cdns,i2c-r1p10' was unexpected)
From schema:
.../Documentation/devicetree/bindings/i2c/cdns,i2c-r1p10.yaml fds
...: i2c@ff030000: compatible: ['cdns,i2c-r1p14', 'cdns,i2c-r1p10'] is too
long
The commit c415f9e830 ("ARM64: zynqmp: Fix i2c node's compatible string")
has added the second compatible string but without removing origin one.
The patch is only keeping one compatible string "cdns,i2c-r1p14".
Fixes: c415f9e830 ("ARM64: zynqmp: Fix i2c node's compatible string")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/cc294ae1a79ef845af6809ddb4049f0c0f5bb87a.1598259551.git.michal.simek@xilinx.com
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Rename amba-apu and amba to AXI. Based on Xilinx ZynqMP TRM (Chapter 15)
chip is "using the advanced eXtensible interface (AXI) point-to-point
channels for communicating addresses, data, and response transactions
between master and slave clients."
Issues are reported as:
...: amba: $nodename:0: 'amba' does not match
'^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
From schema: .../dt-schema/dtschema/schemas/simple-bus.yaml
...: amba-apu@0: $nodename:0: 'amba-apu@0' does not match
'^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
From schema: .../dt-schema/dtschema/schemas/simple-bus.yaml
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/68f20a2b2bb0feee80bc3348619c2ee98aa69963.1598263539.git.michal.simek@xilinx.com
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
The Pine64 PineCube IP camera is an IP camera with SoChip S3 SoC.
It comes with a main board, an expansion board and a camera.
The main board features a Micro-USB power-only jack, a USB Type-A port,
an Ethernet port connected to the internal PHY of the SoC and a Realtek
RTL8189ES SDIO Wi-Fi module. A RGB LCD connector is reserved on the
board.
The expansion board features a TF slot, a microphone, a speaker
connector with on-board amplifier and a few IR LEDs.
Add support for the kit, with features on the main board and the
expansion board now.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200923010215.148819-2-icenowy@aosc.io
The CSI1 controller of V3/V3s/S3/S3L SoCs is used for parallel CSI.
As we're going to add support for Pine64 SCC board, which uses 8-bit
parallel CSI (and the MCLK output), add the pinctrl node of 8-bit
CSI and MCLK to the DTSI file.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200923010122.148661-1-icenowy@aosc.io
arm64: dtc: amlogic updates for v5.10
- new boards: libretch s905x cc v2, Hardkernel ODROID-N2+
- vim3: sound updates
* tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson: initial support for aml-s905x-cc v2
dt-bindings: arm: amlogic: add support for libretch s905x cc v2
arm64: dts: meson: add support for the ODROID-N2+
dt-bindings: arm: amlogic: add support for the ODROID-N2+
arm64: dts: meson: convert ODROID-N2 to dtsi
arm64: dts: meson: vim3l: remove sound card definition
arm64: dts: meson: vim3: make sound card common to all variants
arm64: dts: meson: vim3: correct led polarity
Link: https://lore.kernel.org/r/7h3636kjxd.fsf@baylibre.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Qualcomm ARM64 DT updates for v5.10
Cleanup, refactor and modernize MSM8916 by sorting nodes, moving device
and platform specific parts to their respective files, add and use
labels for reference nodes and use IRQ defines. Migrate TCSR mutex off
the depricated binding, add resin node for PM8916.
Add LPASS clock controller for SC7180. Fix the LLCC reg, increase
interconnect-cells, drop flags on MDSS irqs. Add interconnects for
display, eMMC and SD-card, specify 'sustainable_power' for CPU thermal
zones, improve pinconf states related to UART and Bluetooth. Add new DT
for Lazor and Trogdor.
Increase #interconnect-cells for SDM845 to allow tags, add OPP tables
and power-domains for Venus and interconnects for display. Fix the ports
on the HDMI nodes for DB845c and add DT for the Xiaomi Poco F1.
Add interconnect providers, fix up primary USB's clock and use
dt-binding defines for GPU clocks on SM8150.
Add interconnect providers, CPUfreq, thermal configuration and missing
uarts for SM8250. Fix up naming of debug uart, add always-on supply
clock to gcc, fix up the sleep clock rate and define OPP tables for all
QUP devices. Then add a new DeviceTree for the QRB5165 RB5 board.
Enable watchdog on IPQ8074 and use the appropriate compatible for the
PMU node. Enable DVFS support for IPQ6018.
Finally correct the spelling of "interrupts" in MSM8992 uart node, fix
missing # in PM660 #interrupt-cells, add second VFE power-domain to
camss in MSM8996 and sort the Makefile.
* tag 'qcom-arm64-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (75 commits)
arm64: dts: qcom: sm8250: Add thermal zones and throttling support
arm64: dts: qcom: sm8250: Add cpufreq hw node
arm64: dts: qcom: sdm845: Add interconnects property for display
arm64: dts: qcom: sm8250: Add EPSS L3 interconnect provider
arm64: dts: qcom: sm8150: Add OSM L3 interconnect provider
arm64: dts: qcom: sm8250: add interconnect nodes
arm64: dts: qcom: sm8150: add interconnect nodes
arm64: dts: qcom: sc7180: Increase the number of interconnect cells
arm64: dts: qcom: sdm845: Increase the number of interconnect cells
arm64: dts: qcom: Makefile: Sort lines
arm64: dts: qcom: pm8916: Sort nodes
arm64: dts: qcom: msm8916: Sort nodes
arm64: dts: qcom: msm8916: Pad addresses
arm64: dts: qcom: msm8916: Rename "x-smp2p" to "smp2p-x"
arm64: dts: qcom: msm8916: Use more generic node names
arm64: dts: qcom: msm8916: Add MSM8916-specific compatibles to SCM/MSS
arm64: dts: qcom: msm8916: Minor style fixes
arm64: dts: qcom: msm8916: Drop qcom,tcsr-mutex syscon
arm64: dts: qcom: msm8916: Use IRQ defines, add IRQ types
arm64: dts: qcom: msm8916: Fix MDP/DSI interrupts
...
Link: https://lore.kernel.org/r/20200924040607.180039-1-bjorn.andersson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>
New boards NanoPi R2S, A95X-Z2 and more Rock-Pi4 variants.
Khadas-edge additions and a some fixes.
* tag 'v5.10-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: add ir-receiver node to rk3399-khadas-edge
arm64: dts: rockchip: add spiflash node to rk3399-khadas-edge
arm64: dts: rockchip: Add support for FriendlyARM NanoPi R2S
dt-bindings: Add doc for FriendlyARM NanoPi R2S
arm64: dts: rockchip: replace status value "ok" by "okay"
arm64: dts: rockchip: fix cpu-supply for rk3328-evb
arm64: dts: rockchip: add rk3318 A95X Z2 board
dt-bindings: arm: rockchip: add Zkmagic A95X Z2 description
dt-bindings: Add vendor prefix for Shenzhen Zkmagic Technology Co., Ltd.
arm64: dts: rockchip: Add Radxa ROCK Pi 4C support
arm64: dts: rockchip: Add Radxa ROCK Pi 4B support
arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts
dt-bindings: arm: rockchip: Update ROCKPi 4 binding
arm64: dts: rockchip: change spdif fallback compatible on rk3308
arm64: dts: rockchip: Fix power routing to support POE on rk3399-roc-pc
Link: https://lore.kernel.org/r/16010805.MhVyP8KKtY@diego
Signed-off-by: Olof Johansson <olof@lixom.net>
i.MX arm64 device tree change for 5.10:
- New board/device support: Librem 5 phone, i.MX8MM DDR4 EVK, Variscite
VAR-SOM-MX8MN SoM and Symphony board.
- Add NWL MIPI DSI controller support for i.MX8MQ.
- Several series from Krzysztof Kozlowski to clean and fix up i.MX8
based device trees according to DT schema.
- A series from Michael Walle to add sl28cpld support for Kontron sl28
device based on LS1028A.
- Add two parameters for Samsung picophy tuning on imx8mm-evk and
imx8mn-evk boards.
- Add more thermal zones for Layerscape SoCs.
- Various random update and minor fix-ups.
* tag 'imx-dt64-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (71 commits)
arm64: dts: imx8mq-librem5: correct GPIO hog property
arm64: dts: imx8mm-var-som-symphony: Drop wake-up source from RTC
arm64: dts: imx8mq: correct interrupt flags
arm64: dts: imx8mn: correct interrupt flags
arm64: dts: imx8mm: correct interrupt flags
arm64: dts: imx8mm-var-som-symphony: fix ptn5150 interrupts
arm64: dts: layerscape: correct watchdog clocks for LS1088A
arm64: dts: freescale: sl28: enable fan support
arm64: dts: freescale: sl28: enable LED support
arm64: dts: freescale: sl28: map GPIOs to input events
arm64: dts: freescale: sl28: enable sl28cpld
arm64: dts: imx8mq-evk: Add MIPI DSI support
arm64: dts: layerscape: Add label to pcie nodes
arm64: dts: imx8mn-var-som-symphony: Add Variscite Symphony board with VAR-SOM-MX8MN
arm64: dts: imx8mn-var-som: Add Variscite VAR-SOM-MX8MN System on Module
arm64: dts: imx8mn-ddr4-evk: Remove unneeded PMIC pin configuration
arm64: dts: imx8mm-var-som-symphony: Adjust ethernet pin configuration
arm64: dts: imx8mm-var-som-symphony: Remove unneeded i2c3 properties
arm64: dts: imx8mm-var-som-symphony: Drop unused gpioledgrp
arm64: dts: imx8mq-librem5: Add interrupt-names to ti,tps6598x
...
Link: https://lore.kernel.org/r/20200923073009.23678-5-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
