The send_ext_msg_udp() function has become quite large, currently
spanning 102 lines. Its complexity, along with extensive pointer and
offset manipulation, makes it difficult to read and error-prone.
The function has evolved over time, and it’s now due for a refactor.
To improve readability and maintainability, isolate the case where no
message fragmentation occurs into a separate function, into a new
send_msg_no_fragmentation() function. This scenario covers about 95% of
the messages.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Variable msg_ready is useless, since it does not represent anything. Get
rid of it, using buf directly instead.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Change ynl-gen-c.py to use NLA_BE16 and NLA_BE32 types to represent
big-endian u16 and u32 ynl types.
Doing this enables those attributes to have range checks applied, as
the validator will then convert to host endianness prior to validation.
The autogenerated kernel/uapi code have been regenerated by running:
./tools/net/ynl/ynl-regen.sh -f
This changes the policy types of the following attributes:
FOU_ATTR_PORT (NLA_U16 -> NLA_BE16)
FOU_ATTR_PEER_PORT (NLA_U16 -> NLA_BE16)
These two are used with nla_get_be16/nla_put_be16().
MPTCP_PM_ADDR_ATTR_ADDR4 (NLA_U32 -> NLA_BE32)
This one is used with nla_get_in_addr/nla_put_in_addr(),
which uses nla_get_be32/nla_put_be32().
IOWs the generated changes are AFAICT aligned with their implementations.
The generated userspace code remains identical, and have been verified
by comparing the output generated by the following command:
make -C tools/net/ynl/generated
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241017094704.3222173-1-ast@fiberby.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Petr Machata says:
====================
selftests: net: Introduce deferred commands
Recently, a defer helper was added to Python selftests. The idea is to keep
cleanup commands close to their dirtying counterparts, thereby making it
more transparent what is cleaning up what, making it harder to miss a
cleanup, and make the whole cleanup business exception safe. All these
benefits are applicable to bash as well, exception safety can be
interpreted in terms of safety vs. a SIGINT.
This patchset therefore introduces a framework of several helpers that
serve to schedule cleanups in bash selftests.
- Patch #1 has more details about the primitives being introduced.
Patch #2 adds a fallback cleanup() function to lib.sh, because ideally
selftests wouldn't need to introduce a dedicated cleanup function at all.
- Patch #3 adds a parameter to stop_traffic(), which makes it possible to
start other background processes after the traffic is started without
confusing the cleanup.
- Patches #4 to #10 convert a number of selftests.
The goal was to convert all tests that use start_traffic / stop_traffic
to the defer framework. Leftover traffic generators are a particularly
painful sort of a missed cleanup. Normal unfinished cleanups can usually
be cleaned up simply by rerunning the test and interrupting it early to
let the cleanups run again / in full. This does not work with
stop_traffic, because it is only issued at the end of the test case that
starts the traffic. At the same time, leftover traffic generators
influence follow-up test runs, and are hard to notice.
The tests were however converted whole-sale, not just their traffic bits.
Thus they form a proof of concept of the defer framework.
====================
Link: https://patch.msgid.link/cover.1729157566.git.petrm@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use the defer framework to schedule cleanups as soon as the command is
executed.
Note that the start_traffic commands in __burst_test() are each sending a
fixed number of packets (note the -c flag) and then ending. They therefore
do not need a matching stop_traffic.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use the defer framework to schedule cleanups as soon as the command is
executed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use the defer framework to schedule cleanups as soon as the command is
executed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use the defer framework to schedule cleanups as soon as the command is
executed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use the defer framework to schedule cleanups as soon as the command is
executed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use the defer framework to schedule cleanups as soon as the command is
executed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Instead of having a suite of dedicated cleanup functions, use the defer
framework to schedule cleanups right as their setup functions are run.
The sleep after stop_traffic() in mlxsw selftests is necessary, but
scheduling it as "defer sleep; defer stop_traffic" is silly. Instead, add a
local helper to stop traffic and sleep afterwards.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that it is possible to schedule a deferral of stop_traffic() right
after the traffic is started, we do not have to rely on the %% magic to
kill the background process that was started last. Instead we can just give
the PID explicitly. This makes it possible to start other background
processes after the traffic is started without confusing the cleanup.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Consistent use of defers obviates the need for a separate test-specific
cleanup function -- everything is just taken care of in defers. So in this
patch, introduce a cleanup() helper in the forwarding lib.sh, which calls
just pre_cleanup() and defer_scopes_cleanup(). Selftests are obviously
still free to override the function.
Since pre_cleanup() is too entangled with forwarding-specific minutia, the
function cannot currently be in net/lib.sh.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In commit 8510801a9d ("selftests: drv-net: add ability to schedule
cleanup with defer()"), a defer helper was added to Python selftests.
The idea is to keep cleanup commands close to their dirtying counterparts,
thereby making it more transparent what is cleaning up what, making it
harder to miss a cleanup, and make the whole cleanup business exception
safe. All these benefits are applicable to bash as well, exception safety
can be interpreted in terms of safety vs. a SIGINT.
This patch therefore introduces a framework of several helpers that serve
to schedule cleanups in bash selftests:
- defer_scope_push(), defer_scope_pop(): Deferred statements can be batched
together in scopes. When a scope is popped, the deferred commands
scheduled in that scope are executed in the order opposite to order of
their scheduling.
- defer(): Schedules a defer to the most recently pushed scope (or the
default scope if none was pushed.)
- defer_prio(): Schedules a defer on the priority track. The priority defer
queue is run before the default defer queue when scope is popped.
The issue that this is addressing is specifically the one of restoring
devlink shared buffer threshold type. When setting up static thresholds,
one has to first change the threshold type to static, then override the
individual thresholds. When cleaning up, it would be natural to reset the
threshold values first, then change the threshold type. But the values
that are valid for dynamic thresholds are generally invalid for static
thresholds and vice versa. Attempts to restore the values first would be
bounced. Thus one has to first reset the threshold type, then adjust the
thresholds.
(You could argue that the shared buffer threshold type API is broken and
you would be right, but here we are.)
This cannot be solved by pure defers easily. I considered making it
possible to disable an existing defer, so that one could then schedule a
new defer and disable the original. But this forward-shifting of the
defer job would have to take place after every threshold-adjusting
command, which would make it very awkward to schedule these jobs.
- defer_scopes_cleanup(): Pops any unpopped scopes, including the default
one. The selftests that use defer should run this in their exit trap.
This is important to get cleanups of interrupted scripts.
- in_defer_scope(): Sometimes a function would like to introduce a new
defer scope, then run whatever it is that it wants to run, and then pop
the scope to run the deferred cleanups. The helper in_defer_scope() can
be used to run another command within such environment, such that any
scheduled defers run after the command finishes.
The framework is added as a separate file lib/sh/defer.sh so that it can be
used by all bash selftests, including those that do not currently use
lib.sh. lib.sh however includes the file by default, because ideally all
tests would use these helpers instead of hand-rolling their cleanups.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently reset state configuration of split header works fine for
non-tagged packets and we see no corruption in payload of any size
We need additional programming sequence with reset configuration to
handle VLAN tagged packets to avoid corruption in payload for packets
of size greater than 256 bytes.
Without this change ping application complains about corruption
in payload when the size of the VLAN packet exceeds 256 bytes.
With this change tagged and non-tagged packets of any size works fine
and there is no corruption seen.
Current configuration which has the issue for VLAN packet
----------------------------------------------------------
Split happens at the position at Layer 3 header
|MAC-DA|MAC-SA|Vlan Tag|Ether type|IP header|IP data|Rest of the payload|
2 bytes ^
|
With the fix we are making sure that the split happens now at
Layer 2 which is end of ethernet header and start of IP payload
Ip traffic split
-----------------
Bits which take care of this are SPLM and SPLOFST
SPLM = Split mode is set to Layer 2
SPLOFST = These bits indicate the value of offset from the beginning
of Length/Type field at which header split should take place when the
appropriate SPLM is selected. Reset value is 2bytes.
Un-tagged data (without VLAN)
|MAC-DA|MAC-SA|Ether type|IP header|IP data|Rest of the payload|
2bytes ^
|
Tagged data (with VLAN)
|MAC-DA|MAC-SA|VLAN Tag|Ether type|IP header|IP data|Rest of the payload|
2bytes ^
|
Non-IP traffic split such AV packet
------------------------------------
Bits which take care of this are
SAVE = Split AV Enable
SAVO = Split AV Offset, similar to SPLOFST but this is for AVTP
packets.
|Preamble|MAC-DA|MAC-SA|VLAN tag|Ether type|IEEE 1722 payload|CRC|
2bytes ^
|
Signed-off-by: Abhishek Chauhan <quic_abchauha@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241016234313.3992214-1-quic_abchauha@quicinc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Kuniyuki Iwashima says:
====================
rtnetlink: Refactor rtnl_{new,del,set}link() for per-netns RTNL.
This is a prep for the next series where we will push RTNL down to
rtnl_{new,del,set}link().
That means, for example, __rtnl_newlink() is always under RTNL, but
rtnl_newlink() has a non-RTNL section.
As a prerequisite for per-netns RTNL, we will move netns validation
(and RTNL-independent validations if possible) to that section.
rtnl_link_ops and rtnl_af_ops will be protected with SRCU not to
depend on RTNL.
Changes:
v2:
* Add Eric's Reviewed-by to patch 1-4,6,8-11, (no tag on 5,7,12-14)
* Patch 7
* Handle error of init_srcu_struct().
* Call cleanup_srcu_struct() after synchronize_srcu().
* Patch 12
* Move put_net() before errorout label
* Patch 13
* Newly added as prep for patch 14
* Patch 14
* Handle error of init_srcu_struct().
* Call cleanup_srcu_struct() after synchronize_srcu().
v1: https://lore.kernel.org/netdev/20241009231656.57830-1-kuniyu@amazon.com/
====================
Link: https://patch.msgid.link/20241016185357.83849-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Once RTNL is replaced with rtnl_net_lock(), we need a mechanism to
guarantee that rtnl_af_ops is alive during inflight RTM_SETLINK
even when its module is being unloaded.
Let's use SRCU to protect ops.
rtnl_af_lookup() now iterates rtnl_af_ops under RCU and returns
SRCU-protected ops pointer. The caller must call rtnl_af_put()
to release the pointer after the use.
Also, rtnl_af_unregister() unlinks the ops first and calls
synchronize_srcu() to wait for inflight RTM_SETLINK requests to
complete.
Note that rtnl_af_ops needs to be protected by its dedicated lock
when RTNL is removed.
Note also that BUG_ON() in do_setlink() is changed to the normal
error handling as a different af_ops might be found after
validate_linkmsg().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The next patch will add init_srcu_struct() in rtnl_af_register(),
then we need to handle its error.
Let's add the error handling in advance to make the following
patch cleaner.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will push RTNL down to rtnl_setlink().
RTM_SETLINK could call rtnl_link_get_net_capable() in do_setlink()
to move a dev to a new netns, but the netns needs to be fetched before
holding rtnl_net_lock().
Let's move it to rtnl_setlink() and pass the netns to do_setlink().
Now, RTM_NEWLINK paths (rtnl_changelink() and rtnl_group_changelink())
can pass the prefetched netns to do_setlink().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will push RTNL down to rtnl_setlink().
Let's unify the error path to make it easy to place rtnl_net_lock().
While at it, keep the variables in reverse xmas order.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will push RTNL down to rtnl_delink().
Let's unify the error path to make it easy to place rtnl_net_lock().
While at it, keep the variables in reverse xmas order.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Another netns option for RTM_NEWLINK is IFLA_LINK_NETNSID and
is fetched in rtnl_newlink_create().
This must be done before holding rtnl_net_lock().
Let's move IFLA_LINK_NETNSID processing to rtnl_newlink().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As a prerequisite of per-netns RTNL, we must fetch netns before
looking up dev or moving it to another netns.
rtnl_link_get_net_capable() is called in rtnl_newlink_create() and
do_setlink(), but both of them need to be moved to the RTNL-independent
region, which will be rtnl_newlink().
Let's call rtnl_link_get_net_capable() in rtnl_newlink() and pass the
netns down to where needed.
Note that the latter two have not passed the nets to do_setlink() yet
but will do so after the remaining rtnl_link_get_net_capable() is moved
to rtnl_setlink() later.
While at it, dest_net is renamed to tgt_net in rtnl_newlink_create() to
align with rtnl_{del,set}link().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Once RTNL is replaced with rtnl_net_lock(), we need a mechanism to
guarantee that rtnl_link_ops is alive during inflight RTM_NEWLINK
even when its module is being unloaded.
Let's use SRCU to protect ops.
rtnl_link_ops_get() now iterates link_ops under RCU and returns
SRCU-protected ops pointer. The caller must call rtnl_link_ops_put()
to release the pointer after the use.
Also, __rtnl_link_unregister() unlinks the ops first and calls
synchronize_srcu() to wait for inflight RTM_NEWLINK requests to
complete.
Note that link_ops needs to be protected by its dedicated lock
when RTNL is removed.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ops->validate() does not require RTNL.
Let's move it to rtnl_newlink().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, if neither dev nor rtnl_link_ops is found in __rtnl_newlink(),
we release RTNL and redo the whole process after request_module(), which
complicates the logic.
The ops will be RTNL-independent later.
Let's move the ops lookup to rtnl_newlink() and do the retry earlier.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will push RTNL down to rtnl_newlink().
Let's move RTNL-independent validation to rtnl_newlink().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
__rtnl_newlink() got too long to maintain.
For example, netdev_master_upper_dev_get()->rtnl_link_ops is fetched even
when IFLA_INFO_SLAVE_DATA is not specified.
Let's factorise the single dev do_setlink() path to a separate function.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are 3 paths that finally call do_setlink(), and validate_linkmsg()
is called in each path.
1. RTM_NEWLINK
1-1. dev is found in __rtnl_newlink()
1-2. dev isn't found, but IFLA_GROUP is specified in
rtnl_group_changelink()
2. RTM_SETLINK
The next patch factorises 1-1 to a separate function.
As a preparation, let's move validate_linkmsg() calls to do_setlink().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We will move linkinfo to rtnl_newlink() and pass it down to other
functions.
Let's pack it into rtnl_newlink_tbs.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tariq Toukan says:
====================
net/mlx5: Refactor esw QoS to support generalized operations
This patch series from the team to mlx5 core driver consists of one main
QoS part followed by small misc patches.
This main part (patches 1 to 11) by Carolina refactors the QoS handling
to generalize operations on scheduling groups and vports. These changes
are necessary to support new features that will extend group
functionality, introduce new group types, and support deeper
hierarchies.
Additionally, this refactor updates the terminology from "group" to
"node" to better reflect the hardware’s rate hierarchy and its use
of scheduling element nodes.
Simplify group scheduling element creation:
- net/mlx5: Refactor QoS group scheduling element creation
Refactor to support generalized operations for QoS:
- net/mlx5: Introduce node type to rate group structure
- net/mlx5: Add parent group support in rate group structure
- net/mlx5: Restrict domain list insertion to root TSAR ancestors
- net/mlx5: Rename vport QoS group reference to parent
- net/mlx5: Introduce node struct and rename group terminology to node
- net/mlx5: Refactor vport scheduling element creation function
- net/mlx5: Refactor vport QoS to use scheduling node structure
- net/mlx5: Remove vport QoS enabled flag
Support generalized operations for QoS elements:
- net/mlx5: Simplify QoS scheduling element configuration
- net/mlx5: Generalize QoS operations for nodes and vports
On top, patch 12 by Moshe handles FW request to move to drop mode.
In patch 13, Benjamin Poirier removes an empty eswitch flow table when
not used, which improves packet processing performance.
Patches 14 and 15 by Moshe are small field renamings as preparation for
future fields addition to these structures.
Series generated against:
commit c531f2269a ("net: bcmasp: enable SW timestamping")
====================
Link: https://patch.msgid.link/20241016173617.217736-1-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As preparation for HW Steering support, rename modify header struct
member action to fs_dr_action, to distinguish from fs_hws_action which
will be added. Add a pointer where needed to keep code line shorter and
more readable.
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As preparation for HW Steering support, rename packet reformat struct
member action to fs_dr_action, to distinguish from fs_hws_action which
will be added. Add a pointer where needed to keep code line shorter and
more readable.
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, when VFs are created, two flow tables are added for the eswitch:
the "fdb" table, which contains rules for each VF and the "vepa_fdb" table.
In the default VEB mode, the vepa_fdb table is empty. When switching to
VEPA mode, flow steering rules are added to vepa_fdb. Even though the
vepa_fdb table is empty in VEB mode, its presence adds some cost to packet
processing. In some workloads, this leads to drops which are reported by
the rx_discards_phy ethtool counter.
In order to improve performance, only create vepa_fdb when in VEPA mode.
Tests were done on a ConnectX-6 Lx adapter forwarding 64B packets between
both ports using dpdk-testpmd. Numbers are Rx-pps for each port, as
reported by testpmd.
Without changes:
traffic to unknown mac
testpmd on PF
numvfs=0,0
35257998,35264499
numvfs=1,1
24590124,24590888
testpmd on VF with numvfs=1,1
20434338,20434887
traffic to VF mac
testpmd on VF with numvfs=1,1
30341014,30340749
With changes:
traffic to unknown mac
testpmd on PF
numvfs=0,0
35404361,35383378
numvfs=1,1
29801247,29790757
testpmd on VF with numvfs=1,1
24310435,24309084
traffic to VF mac
testpmd on VF with numvfs=1,1
34811436,34781706
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On sync reset flow, firmware may request a PF, which already
acknowledged the unload event, to move to drop mode. Drop mode means
that this PF will reduce polling frequency, as this PF is not going to
have another active part in the reset, but only reload back after the
reset.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Refactor QoS normalization and rate calculation functions to operate
on mlx5_esw_sched_node, allowing for generalized handling of both
vports and nodes.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Simplify the configuration of QoS scheduling elements by removing the
separate functions `esw_qos_node_config` and `esw_qos_vport_config`.
Instead, directly use the existing `esw_qos_sched_elem_config` function
for both nodes and vports.
This unification helps in generalizing operations on scheduling
elements nodes.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Remove the `enabled` flag from the `vport->qos` struct, as QoS now
relies solely on the `sched_node` pointer to determine whether QoS
features are in use.
Currently, the vport `qos` struct consists only of the `sched_node`,
introducing an unnecessary two-level reference. However, the qos struct
is retained as it will be extended in future patches to support new QoS
features.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Refactor the vport QoS structure by moving group membership and
scheduling details into the `mlx5_esw_sched_node` structure.
This change consolidates the vport into the rate hierarchy by unifying
the handling of different types of scheduling element nodes.
In addition, add a direct reference to the mlx5_vport within the
mlx5_esw_sched_node structure, to ensure that the vport is easily
accessible when a scheduling node is associated with a vport.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Modify the vport scheduling element creation function to get the parent
node directly, aligning it with the group creation function.
This ensures a consistent flow for scheduling elements creation, as the
parent nodes already contain the device and parent element index.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce the `mlx5_esw_sched_node` struct, consolidating all rate
hierarchy related details, including membership and scheduling
parameters.
Since the group concept aligns with the `mlx5_esw_sched_node`, replace
the `mlx5_esw_rate_group` struct with it and rename the "group"
terminology to "node" throughout the rate hierarchy.
All relevant code paths and structures have been updated to use the
"node" terminology accordingly, laying the groundwork for future
patches that will unify the handling of different types of members
within the rate hierarchy.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Rename the `group` field in the `mlx5_vport` structure to `parent` to
clarify the vport's role as a member of a parent group and distinguish
it from the concept of a general group.
Additionally, rename `group_entry` to `parent_entry` to reflect this
update.
This distinction will be important for handling more complex group
structures and scheduling elements.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Update the logic for adding rate groups to the E-Switch domain list,
ensuring only groups with the root Transmit Scheduling Arbiter as their
parent are included.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce a `parent` field in the `mlx5_esw_rate_group` structure to
support hierarchical group relationships.
The `parent` can reference another group or be set to `NULL`,
indicating the group is connected to the root TSAR.
This change enables the ability to manage groups in a hierarchical
structure for future enhancements.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce the `sched_node_type` enum to represent both the group and
its members as scheduling nodes in the rate hierarchy.
Add the `type` field to the rate group structure to specify the type of
the node membership in the rate hierarchy.
Generalize comments to reflect this flexibility within the rate group
structure.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce `esw_qos_create_group_sched_elem` to handle the creation of
group scheduling elements for E-Switch QoS, Transmit Scheduling
Arbiter (TSAR).
This reduces duplication and simplifies code for TSAR setup.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jijie Shao says:
====================
Add support of HIBMCGE Ethernet Driver
This patch set adds the support of Hisilicon BMC Gigabit Ethernet Driver.
This patch set includes basic Rx/Tx functionality. It also includes
the registration and interrupt codes.
This work provides the initial support to the HIBMCGE and
would incrementally add features or enhancements.
====================
Link: https://patch.msgid.link/20241015123516.4035035-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add myself as the maintainer for the hibmcge ethernet driver.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a Makefile and update Kconfig to build hibmcge driver.
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
