mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-06-13 06:00:13 -04:00
de45401e27bcecbc56ff2f02edc00a37beb1501b
39138 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Vincent Guittot
|
0472132df8 |
dt-bindings: PCI: s32g: Add NXP S32G PCIe controller
Describe the PCIe host controller available on the S32G platforms. Co-developed-by: Ionut Vicovan <Ionut.Vicovan@nxp.com> Signed-off-by: Ionut Vicovan <Ionut.Vicovan@nxp.com> Co-developed-by: Bogdan-Gabriel Roman <bogdan-gabriel.roman@nxp.com> Signed-off-by: Bogdan-Gabriel Roman <bogdan-gabriel.roman@nxp.com> Co-developed-by: Larisa Grigore <larisa.grigore@nxp.com> Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com> Co-developed-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@nxp.com> Signed-off-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@nxp.com> Co-developed-by: Ciprian Marian Costea <ciprianmarian.costea@nxp.com> Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@nxp.com> Co-developed-by: Bogdan Hamciuc <bogdan.hamciuc@nxp.com> Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@nxp.com> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20251121164920.2008569-2-vincent.guittot@linaro.org |
||
|
Linus Torvalds
|
98906f9d85 |
Merge tag 'rtc-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni: "This cycle, we have a new RTC driver, for the SpacemiT P1. The optee driver gets alarm support. We also get a fix for a race condition that was fairly rare unless while stress testing the alarms. Subsystem: - Fix race when setting alarm - Ensure alarm irq is enabled when UIE is enabled - remove unneeded 'fast_io' parameter in regmap_config New driver: - SpacemiT P1 RTC Drivers: - efi: Remove wakeup functionality - optee: add alarms support - s3c: Drop support for S3C2410 - zynqmp: Restore alarm functionality after kexec transition" * tag 'rtc-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (29 commits) rtc: interface: Ensure alarm irq is enabled when UIE is enabled rtc: tps6586x: Fix initial enable_irq/disable_irq balance rtc: cpcap: Fix initial enable_irq/disable_irq balance rtc: isl12022: Fix initial enable_irq/disable_irq balance rtc: interface: Fix long-standing race when setting alarm rtc: pcf2127: fix watchdog interrupt mask on pcf2131 rtc: zynqmp: Restore alarm functionality after kexec transition rtc: amlogic-a4: Optimize global variables rtc: sd2405al: Add I2C address. rtc: Kconfig: move symbols to proper section rtc: optee: make optee_rtc_pm_ops static rtc: optee: Fix error code in optee_rtc_read_alarm() rtc: optee: fix error code in probe() dt-bindings: rtc: Convert apm,xgene-rtc to DT schema rtc: spacemit: support the SpacemiT P1 RTC rtc: optee: add alarm related rtc ops to optee rtc driver rtc: optee: remove unnecessary memory operations rtc: optee: fix memory leak on driver removal rtc: x1205: Fix Xicor X1205 vendor prefix dt-bindings: rtc: Fix Xicor X1205 vendor prefix ... |
||
|
Linus Torvalds
|
f76b1683d1 |
Merge tag 'devicetree-fixes-for-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring: - Allow child nodes on renesas-bsc bus binding - Drop node name pattern on allwinner,sun50i-a64-de2 bus binding - Switch DT patchwork to kernel.org from ozlabs.org - Fix some typos in docs and bindings - Fix reference count in PCI node unittest * tag 'devicetree-fixes-for-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: bus: renesas-bsc: allow additional properties dt-bindings: bus: allwinner,sun50i-a64-de2: don't check node names MAINTAINERS: Move DT patchwork to kernel.org of: unittest: Fix device reference count leak in of_unittest_pci_node_verify of: doc: Fix typo in doc comments. dt-bindings: mmc: Correct typo "upto" to "up to" |
||
|
Wolfram Sang
|
ce740955b2 |
dt-bindings: bus: renesas-bsc: allow additional properties
Allow additional properties to enable devices attached to the bus.
Fixes warnings like these:
arch/arm/boot/dts/renesas/sh73a0-kzm9g.dtb: bus@fec10000 (renesas,bsc-sh73a0): Unevaluated properties are not allowed ('ethernet@10000000' was unexpected)
arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dtb: bus@fec10000 (renesas,bsc-r8a73a4): Unevaluated properties are not allowed ('ethernet@8000000', 'flash@0' were unexpected)
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
||
|
Wolfram Sang
|
f7045387a6 |
dt-bindings: bus: allwinner,sun50i-a64-de2: don't check node names
Node names are already and properly checked by the core schema. No need to do it again. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> [robh: Also drop [A-F] in unit address] Signed-off-by: Rob Herring (Arm) <robh@kernel.org> |
||
|
Linus Torvalds
|
aac3190332 |
Merge tag 'i2c-for-6.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
- Second part of rtl9300 updates since dependencies are in now:
- general cleanups
- implement block read/write support
- add RTL9310 support
- DT schema conversion of hix5hd2 binding
- namespace cleanup for i2c-algo-pca
- minor simplification for mt65xx
* tag 'i2c-for-6.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
dt-bindings: i2c: hisilicon,hix5hd2: convert to DT schema
i2c: mt65xx: convert set_speed function to void
i2c: rename wait_for_completion callback to wait_for_completion_cb
i2c: rtl9300: add support for RTL9310 I2C controller
dt-bindings: i2c: realtek,rtl9301-i2c: extend for RTL9310 support
i2c: rtl9300: use scoped guard instead of explicit lock/unlock
i2c: rtl9300: separate xfer configuration and execution
i2c: rtl9300: do not set read mode on every transfer
i2c: rtl9300: move setting SCL frequency to config_io
i2c: rtl9300: rename internal sda_pin to sda_num
dt-bindings: i2c: realtek,rtl9301-i2c: fix wording and typos
i2c: rtl9300: use regmap fields and API for registers
i2c: rtl9300: Implement I2C block read and write
|
||
|
Kael D'Alcamo
|
eb4faf6343 |
dt-bindings: i2c: hisilicon,hix5hd2: convert to DT schema
Convert the Devicetree binding documentation for hisilicon,hix5hd2-i2c from plain text to DT binding schema. Signed-off-by: Kael D'Alcamo <dev@kael-k.io> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> |
||
|
Linus Torvalds
|
cd5a0afbdf |
Merge tag 'mailbox-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- Qualcomm: add Glymur CPUCP mailbox binding
- Xilinx Zynq: misc cleanup
- MediaTek:
- add new GPUEB mailbox driver
- cmdq: remove pm_runtime calls from send_data
- gce: make clock-names optional
- misc:
- change mailbox-altera maintainer
- remove redundant 'fast_io' in regmap_config
- mhuv3: Remove no_free_ptr
* tag 'mailbox-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox: mtk-cmdq: Remove pm_runtime APIs from cmdq_mbox_send_data()
mailbox: add MediaTek GPUEB IPI mailbox
dt-bindings: mailbox: Add MT8196 GPUEB Mailbox
mailbox: zynqmp-ipi: Fix SGI cleanup on unbind
mailbox: zynqmp-ipi: Fix out-of-bounds access in mailbox cleanup loop
mailbox: zynqmp-ipi: Remove dev.parent check in zynqmp_ipi_free_mboxes
mailbox: zynqmp-ipi: Remove redundant mbox_controller_unregister() call
mailbox: remove unneeded 'fast_io' parameter in regmap_config
dt-bindings: mailbox: mediatek,gce-mailbox: Make clock-names optional
dt-bindings: mailbox: qcom: Document Glymur CPUCP mailbox controller binding
MAINTAINERS: Change mailbox-altera maintainer
mailbox: arm_mhuv3: Remove no_free_ptr() to maintain the original form of the pointer
|
||
|
Linus Torvalds
|
99cedb6b8f |
Merge tag 'input-for-v6.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- Conversions to yaml/json schema and fixes for input-related device
tree bindings
- New drivers:
- Awinic AW86927 haptic chip
- Hynitron CST816x series controller
- Himax HX852x(ES) touchscreen controller
- Fix uinput to not leak kernel memory via a gap in
uinput_ff_upload_compat structure
- Prevent overflow in pressure calculation in tsc2007 driver causing
phantom touches
- Make the Atmel maxTouch driver support generic touchscreen
configuration (flip, rotate, etc)
- Drop support for platform data in tca8418_keypad, pxa27x-keypad,
spear-keyboard and twl4030_keypad drivers, they all now rely on
generic device properties for configuration
- Other assorted changes and fixes
* tag 'input-for-v6.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (50 commits)
Input: atmel_mxt_ts - allow reset GPIO to sleep
Input: aw86927 - fix error code in probe()
Input: psxpad-spi - add a check for the return value of spi_setup()
Input: uinput - zero-initialize uinput_ff_upload_compat to avoid info leak
Input: aw86927 - add driver for Awinic AW86927
dt-bindings: input: Add Awinic AW86927
dt-bindings: touchscreen: remove touchscreen.txt
dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Add touchscreen child node
dt-bindings: touchscreen: convert eeti bindings to json schema
Input: pm8941-pwrkey - disable wakeup for resin by default
dt-bindings: input: pm8941-pwrkey: Document wakeup-source property
Input: add driver for Hynitron CST816x series
dt-bindings: input: touchscreen: add hynitron cst816x series
Input: imx6ul_tsc - set glitch threshold by DTS property
dt-bindings: touchscreen: fsl,imx6ul-tsc: support glitch thresold
dt-bindings: touchscreen: add debounce-delay-us property
Input: ps2-gpio - fix typo
Input: atmel_mxt_ts - add support for generic touchscreen configurations
dt-bindings: input: maxtouch: add common touchscreen properties
dt-bindings: touchscreen: convert zet6223 bindings to json schema
...
|
||
|
Linus Torvalds
|
522ba450b5 |
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd: "There's a bunch of patches here across drivers/clk/ to migrate drivers to use struct clk_ops::determine_rate() instead of the round_rate() one so that we can remove the round_rate clk_op entirely. Brian has taken up that task which nobody else has wanted to do for close to a decade. Thanks Brian! This is all prerequisite work to get to the real task of improving the clk rate setting process. Once we have determine_rate() used everywhere, we'll be able to do things like chain the rate request structs in linked lists to order the rate setting operations or add more parameters without having to change every clk driver in existence. It's also nice to not have multiple ways to do something which just causes confusion for clk driver authors. Overall I'm glad this is getting done. Beyond this change we also have a tweak to the clk_lookup() function in the core framework to use hashing on the clk name instead of a clk tree walk with string comparisons. We _still_ rely on the clk name to be unique, because historically we've used globally unique strings to describe the clk tree topology. This tree walk becomes increasingly slow as more clks are added to the system. Searching from the roots for a duplicate is simple but pretty dumb and it wastes boot time so we're using a hash table as an improvement. Ideally we wouldn't rely on the strings to be unique at all, relegating them to simply debug information, but that is future work that will likely require some sort of Kconfig knob indicating strings aren't used for topology description. Outside of the core framework changes we have the usual new SoC support and fixes to clk drivers for things that were discovered once the clks were used by consumer drivers. Nothing in particular is jumping out at me in the "misc" pile, except maybe the Amlogic driver that has gone through a refactoring. That series got a fix from testing in -next though so it seems likely that things have been getting good test coverage for a couple weeks already" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (299 commits) clk: microchip: core: remove duplicate roclk_determine_rate() reset: aspeed: register AST2700 reset auxiliary bus device dt-bindings: clock: ast2700: modify soc0/1 clock define clk: tegra: do not overallocate memory for bpmp clocks clk: ep93xx: Use int type to store negative error codes clk: nxp: Fix pll0 rate check condition in LPC18xx CGU driver clk: loongson2: Add clock definitions for Loongson-2K0300 SoC clk: loongson2: Avoid hardcoding firmware name of the reference clock clk: loongson2: Allow zero divisors for dividers clk: loongson2: Support scale clocks with an alternative mode clk: loongson2: Allow specifying clock flags for gate clock dt-bindings: clock: loongson2: Add Loongson-2K0300 compatible clk: clocking-wizard: Fix output clock register offset for Versal platforms clk: xilinx: Optimize divisor search in clk_wzrd_get_divisors_ver() clk: mmp: pxa1908: Instantiate power driver through auxiliary bus clk: s2mps11: add support for S2MPG10 PMIC clock dt-bindings: clock: samsung,s2mps11: add s2mpg10 dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings clk: stm32: introduce clocks for STM32MP21 platform dt-bindings: stm32: add STM32MP21 clocks and reset bindings ... |
||
|
Nicolas Frattaroli
|
d3e35a151a |
dt-bindings: mailbox: Add MT8196 GPUEB Mailbox
The MediaTek MT8196 SoC includes an embedded MCU referred to as "GPUEB", acting as glue logic to control power and frequency of the Mali GPU. This MCU runs special-purpose firmware for this use, and the main application processor communicates with it through a mailbox. Add a binding that describes this mailbox. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com> |
||
|
AngeloGioacchino Del Regno
|
426f4e9414 |
dt-bindings: mailbox: mediatek,gce-mailbox: Make clock-names optional
The GCE Mailbox needs only one clock and the clock-names can be used only by the driver (which, for instance, does not use it), and this is true for all of the currently supported MediaTek SoCs. Stop requiring to specify clock-names on all non-MT8195 GCEs. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Acked-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com> |
||
|
Sibi Sankar
|
526ce9eb45 |
dt-bindings: mailbox: qcom: Document Glymur CPUCP mailbox controller binding
Document CPU Control Processor (CPUCP) mailbox controller for Qualcomm Glymur SoCs. It is software compatible with X1E80100 CPUCP mailbox controller hence fallback to it. Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com> |
||
|
Linus Torvalds
|
169c9d06a2 |
Merge tag 'linux-watchdog-6.18-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck: - renesas,wdt: Add support for RZ/T2H and RZ/N2H - Add SMARC-sAM67 support - Several small fixes and improvements * tag 'linux-watchdog-6.18-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog/hpwdt New maintianer dt-bindings: watchdog: add SMARC-sAM67 support watchdog: mpc8xxx_wdt: Reload the watchdog timer when enabling the watchdog watchdog: visconti: don't print superfluous errors watchdog: rzv2h_wdt: don't print superfluous errors watchdog: rzg2l_wdt: don't print superfluous errors watchdog: s3c2410_wdt: exynosautov9: Enable supported features watchdog: s3c2410_wdt: exynosautov920: Enable QUIRK_HAS_32BIT_CNT watchdog: s3c2410_wdt: Increase max timeout value of watchdog watchdog: s3c2410_wdt: Fix max_timeout being calculated larger watchdog: s3c2410_wdt: Replace hardcoded values with macro definitions watchdog: rzv2h: Improve error strings and add newlines watchdog: rzv2h: Add support for RZ/T2H watchdog: rzv2h: Add support for configurable count clock source watchdog: rzv2h: Make "oscclk" and reset controller optional watchdog: rzv2h: Obtain clock-divider and timeout values from OF match data dt-bindings: watchdog: renesas,wdt: Add support for RZ/T2H and RZ/N2H watchdog: intel_oc_wdt: Do not try to write into const memory |
||
|
Stephen Boyd
|
8397c58ea7 |
Merge branches 'clk-marvell', 'clk-xilinx', 'clk-mediatek' and 'clk-loongson' into clk-next
- Add Mediatek MT8196 clk drivers * clk-marvell: clk: mmp: pxa1908: Instantiate power driver through auxiliary bus * clk-xilinx: clk: clocking-wizard: Fix output clock register offset for Versal platforms clk: xilinx: Optimize divisor search in clk_wzrd_get_divisors_ver() * clk-mediatek: (31 commits) clk: mediatek: Add MT8196 vencsys clock support clk: mediatek: Add MT8196 vdecsys clock support clk: mediatek: Add MT8196 ovl1 clock support clk: mediatek: Add MT8196 ovl0 clock support clk: mediatek: Add MT8196 disp-ao clock support clk: mediatek: Add MT8196 disp1 clock support clk: mediatek: Add MT8196 disp0 clock support clk: mediatek: Add MT8196 mfg clock support clk: mediatek: Add MT8196 mdpsys clock support clk: mediatek: Add MT8196 mcu clock support clk: mediatek: Add MT8196 I2C clock support clk: mediatek: Add MT8196 pextpsys clock support clk: mediatek: Add MT8196 ufssys clock support clk: mediatek: Add MT8196 peripheral clock support clk: mediatek: Add MT8196 vlpckgen clock support clk: mediatek: Add MT8196 topckgen2 clock support clk: mediatek: Add MT8196 topckgen clock support clk: mediatek: Add MT8196 apmixedsys clock support dt-bindings: clock: mediatek: Describe MT8196 clock controllers clk: mediatek: clk-mtk: Add MUX_DIV_GATE macro ... * clk-loongson: clk: loongson2: Add clock definitions for Loongson-2K0300 SoC clk: loongson2: Avoid hardcoding firmware name of the reference clock clk: loongson2: Allow zero divisors for dividers clk: loongson2: Support scale clocks with an alternative mode clk: loongson2: Allow specifying clock flags for gate clock dt-bindings: clock: loongson2: Add Loongson-2K0300 compatible |
||
|
Stephen Boyd
|
b91217d912 |
Merge branches 'clk-microchip', 'clk-lookup' and 'clk-st' into clk-next
- Speed up clk_core_lookup() by using a hashtable * clk-microchip: ARM: at91: remove default values for PMC_PLL_ACR clk: at91: add ACR in all PLL settings clk: at91: sam9x7: Add peripheral clock id for pmecc clk: at91: clk-master: Add check for divide by 3 clk: at91: clk-sam9x60-pll: force write to PLL_UPDT register ARM: at91: pm: save and restore ACR during PLL disable/enable * clk-lookup: clk: Use hashtable for global clk lookups clk: Sort include statements * clk-st: dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings clk: stm32: introduce clocks for STM32MP21 platform dt-bindings: stm32: add STM32MP21 clocks and reset bindings |
||
|
Stephen Boyd
|
f0fd248204 |
Merge branches 'clk-scmi', 'clk-qcom' and 'clk-broadcom' into clk-next
* clk-scmi: clk: scmi: Add duty cycle ops only when duty cycle is supported * clk-qcom: (27 commits) clk: qcom: gcc-sc8280xp: drop obsolete PCIe GDSC comment clk: qcom: tcsrcc-x1e80100: Set the bi_tcxo as parent to eDP refclk clk: qcom: dispcc-glymur: Constify 'struct qcom_cc_desc' clk: qcom: gcc: Add support for Global Clock controller found on MSM8937 dt-bindings: clock: qcom: Add MSM8937 Global Clock Controller clk: qcom: Select the intended config in QCS_DISPCC_615 clk: qcom: common: Fix NULL vs IS_ERR() check in qcom_cc_icc_register() clk: qcom: alpha-pll: convert from round_rate() to determine_rate() clk: qcom: milos: Constify 'struct qcom_cc_desc' clk: qcom: gcc: Add support for Global Clock Controller dt-bindings: clock: qcom: document the Glymur Global Clock Controller clk: qcom: clk-alpha-pll: Add support for Taycan EKO_T PLL clk: qcom: rpmh: Add support for Glymur rpmh clocks clk: qcom: Add TCSR clock driver for Glymur SoC dt-bindings: clock: qcom: Document the Glymur SoC TCSR Clock Controller dt-bindings: clock: qcom-rpmhcc: Add support for Glymur SoCs clk: qcom: dispcc-glymur: Add support for Display Clock Controller dt-bindings: clock: Add DISPCC and reset controller for GLYMUR SoC clk: qcom: gcc-sdm660: Add missing LPASS/CDSP vote clocks dt-bindings: clock: gcc-sdm660: Add LPASS/CDSP vote clocks/GDSCs ... * clk-broadcom: clk: bcm: rpi: Maximize V3D clock clk: bcm: rpi: Turn firmware clock on/off when preparing/unpreparing clk: bcm: rpi: Add missing logs if firmware fails |
||
|
Stephen Boyd
|
c1e102f349 |
Merge branches 'clk-imx', 'clk-allwinner' and 'clk-ti' into clk-next
* clk-imx: clk: imx95-blk-ctl: Save/restore registers when RPM routines are called clk: imx95-blk-ctl: Save platform data in imx95_blk_ctl structure * clk-allwinner: clk: sunxi-ng: add support for the A523/T527 MCU CCU clk: sunxi-ng: div: support power-of-two dividers clk: sunxi-ng: sun55i-a523-ccu: Add missing NPU module clock dt-bindings: clock: sun55i-a523-ccu: Add A523 MCU CCU clock controller dt-bindings: clock: sun55i-a523-ccu: Add missing NPU module clock clk: sunxi-ng: sun6i-rtc: Add A523 specifics * clk-ti: clk: keystone: sci-clk: use devm_kmemdup_array() clk: ti: am33xx: keep WKUP_DEBUGSS_CLKCTRL enabled |
||
|
Stephen Boyd
|
3aae991cc2 |
Merge branches 'clk-samsung', 'clk-tegra' and 'clk-amlogic' into clk-next
* clk-samsung: clk: s2mps11: add support for S2MPG10 PMIC clock dt-bindings: clock: samsung,s2mps11: add s2mpg10 clk: samsung: exynos990: Add PERIC0 and PERIC1 clock support dt-bindings: clock: exynos990: Add PERIC0 and PERIC1 clock units clk: samsung: exynos990: Add missing USB clock registers to HSI0 clk: samsung: exynos990: Add LHS_ACEL gate clock for HSI0 and update CLK_NR_TOP dt-bindings: clock: exynos990: Add LHS_ACEL clock ID for HSI0 block clk: samsung: artpec-8: Add initial clock support for ARTPEC-8 SoC clk: samsung: Add clock PLL support for ARTPEC-8 SoC dt-bindings: clock: Add ARTPEC-8 clock controller clk: samsung: exynos990: Add DPU_BUS and CMUREF mux/div and update CLKS_NR_TOP dt-bindings: clock: exynos990: Extend clocks IDs clk: samsung: exynos990: Replace bogus divs with fixed-factor clocks clk: samsung: exynos990: Fix CMU_TOP mux/div bit widths clk: samsung: exynos990: Use PLL_CON0 for PLL parent muxes clk: samsung: pll: convert from round_rate() to determine_rate() clk: samsung: cpu: convert from round_rate() to determine_rate() clk: samsung: fsd: Add clk id for PCLK and PLL in CAM_CSI block dt-bindings: clock: Add CAM_CSI clock macro for FSD * clk-tegra: clk: tegra: dfll: Add CVB tables for Tegra114 clk: tegra: Add DFLL DVCO reset control for Tegra114 dt-bindings: arm: tegra: Add ASUS TF101G and SL101 dt-bindings: reset: Add Tegra114 CAR header dt-bindings: arm: tegra: Add Xiaomi Mi Pad (A0101) dt-bindings: clock: tegra30: Add IDs for CSI pad clocks dt-bindings: display: tegra: Move avdd-dsi-csi-supply from VI to CSI dt-bindings: i2c: nvidia,tegra20-i2c: Document Tegra264 I2C * clk-amlogic: clk: amlogic: fix recent code refactoring clk: amlogic: c3-peripherals: use helper for basic composite clocks clk: amlogic: align s4 and c3 pwm clock descriptions clk: amlogic: add composite clock helpers clk: amlogic: use the common pclk definition clk: amlogic: introduce a common pclk definition clk: amlogic: pclk explicitly use CLK_IGNORE_UNUSED clk: amlogic: drop CLK_SET_RATE_PARENT from peripheral clocks clk: amlogic: move PCLK definition to clkc-utils clk: amlogic: aoclk: use clkc-utils syscon probe clk: amlogic: use probe helper in mmio based controllers clk: amlogic: add probe helper for mmio based controllers clk: amlogic: drop meson-clkcee clk: amlogic: naming consistency alignment |
||
|
Stephen Boyd
|
ec7336475d |
Merge branches 'clk-bindings', 'clk-cleanup', 'clk-renesas', 'clk-thead' and 'clk-spacemit' into clk-next
* clk-bindings: dt-bindings: clock: mediatek: Add power-domains property dt-bindings: clock: silabs,si5341: Add missing properties dt-bindings: clock: adi,axi-clkgen: add clock-output-names property dt-bindings: clock: Remove unused fujitsu,mb86s70-crg11 binding dt-bindings: clock: Convert silabs,si570 to DT schema dt-bindings: clock: Convert silabs,si5341 to DT schema dt-bindings: clock: Convert silabs,si514/544 to DT schema * clk-cleanup: clk: tegra: do not overallocate memory for bpmp clocks clk: ep93xx: Use int type to store negative error codes dt-bindings: clock: st: flexgen: remove deprecated compatibles clk: st: flexgen: remove unused compatible clk: clk-axi-clkgen: remove unneeded semicolon clk: tegra: Remove redundant semicolons clk: npcm: select CONFIG_AUXILIARY_BUS clk: remove unneeded 'fast_io' parameter in regmap_config * clk-renesas: (27 commits) clk: renesas: r9a09g05[67]: Reduce differences clk: renesas: r9a09g047: Add USB3.0 clocks/resets clk: renesas: cpg-mssr: Fix memory leak in cpg_mssr_reserved_init() clk: renesas: r9a09g056: Add clock and reset entries for I3C clk: renesas: r9a09g057: Add clock and reset entries for I3C dt-bindings: clock: renesas,r9a09g047-cpg: Add USB3.0 core clocks clk: renesas: r9a09g077: Add Ethernet Subsystem core and module clocks clk: renesas: rzv2h: Simplify polling condition in __rzv2h_cpg_assert() clk: renesas: rzv2h: Re-assert reset on deassert timeout clk: renesas: rzg2l: Re-assert reset on deassert timeout clk: renesas: rzg2l: Simplify rzg2l_cpg_assert() and rzg2l_cpg_deassert() dt-bindings: clock: renesas,r9a09g077/87: Add Ethernet clock IDs clk: renesas: r9a09g047: Add GPT clocks and resets clk: renesas: r9a09g077: Add module clocks for SCI1-SCI5 clk: renesas: rzv2h: remove round_rate() in favor of determine_rate() clk: renesas: rzg2l: convert from round_rate() to determine_rate() clk: renesas: r9a07g04[34]: Use tabs instead of spaces clk: renesas: r9a07g043: Add MSTOP for RZ/G2UL clk: renesas: r9a07g044: Add MSTOP for RZ/G2L clk: renesas: r9a08g045: Add MSTOP for GPIO ... * clk-thead: clk: thead: th1520-ap: set all AXI clocks to CLK_IS_CRITICAL clk: thead: support changing DPU pixel clock rate clk: thead: add support for enabling/disabling PLLs clk: thead: Correct parent for DPU pixel clocks clk: thead: th1520-ap: fix parent of padctrl0 clock clk: thead: th1520-ap: describe gate clocks with clk_gate * clk-spacemit: clk: spacemit: fix i2s clock clk: spacemit: introduce pre-div for ddn clock dt-bindings: clock: spacemit: introduce i2s pre-clock to fix i2s clock clk: spacemit: ccu_pll: convert from round_rate() to determine_rate() clk: spacemit: ccu_mix: convert from round_rate() to determine_rate() clk: spacemit: ccu_ddn: convert from round_rate() to determine_rate() clk: spacemit: fix sspax_clk dt-bindings: clock: spacemit: CLK_SSPA_I2S_BCLK for SSPA |
||
|
Linus Torvalds
|
2f2c725493 |
Merge tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Add PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() macros that
take config space accessor functions.
Implement pci_find_capability(), pci_find_ext_capability(), and
dwc, dwc endpoint, and cadence capability search interfaces with
them (Hans Zhang)
- Leave parent unit address 0 in 'interrupt-map' so that when we
build devicetree nodes to describe PCI functions that contain
multiple peripherals, we can build this property even when
interrupt controllers lack 'reg' properties (Lorenzo Pieralisi)
- Add a Xeon 6 quirk to disable Extended Tags and limit Max Read
Request Size to 128B to avoid a performance issue (Ilpo Järvinen)
- Add sysfs 'serial_number' file to expose the Device Serial Number
(Matthew Wood)
- Fix pci_acpi_preserve_config() memory leak (Nirmoy Das)
Resource management:
- Align m68k pcibios_enable_device() with other arches (Ilpo
Järvinen)
- Remove sparc pcibios_enable_device() implementations that don't do
anything beyond what pci_enable_resources() does (Ilpo Järvinen)
- Remove mips pcibios_enable_resources() and use
pci_enable_resources() instead (Ilpo Järvinen)
- Clean up bridge window sizing and assignment (Ilpo Järvinen),
including:
- Leave non-claimed bridge windows disabled
- Enable bridges even if a window wasn't assigned because not all
windows are required by downstream devices
- Preserve bridge window type when releasing the resource, since
the type is needed for reassignment
- Consolidate selection of bridge windows into two new
interfaces, pbus_select_window() and
pbus_select_window_for_type(), so this is done consistently
- Compute bridge window start and end earlier to avoid logging
stale information
MSI:
- Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol
Vives)
Error handling:
- Align AER with EEH by allowing drivers to request a Bus Reset on
Non-Fatal Errors (in addition to the reset on Fatal Errors that we
already do) (Lukas Wunner)
- If error recovery fails, emit FAILED_RECOVERY uevents for the
devices, not for the bridge leading to them.
This makes them correspond to BEGIN_RECOVERY uevents (Lukas Wunner)
- Align AER with EEH by calling err_handler.error_detected()
callbacks to notify drivers if error recovery fails (Lukas Wunner)
- Align AER with EEH by restoring device error_state to
pci_channel_io_normal before the err_handler.slot_reset() callback.
This is earlier than before the err_handler.resume() callback
(Lukas Wunner)
- Emit a BEGIN_RECOVERY uevent when driver's
err_handler.error_detected() requests a reset, as well as when it
says recovery is complete or can be done without a reset (Niklas
Schnelle)
- Align s390 with AER and EEH by emitting uevents during error
recovery (Niklas Schnelle)
- Align EEH with AER and s390 by emitting BEGIN_RECOVERY,
SUCCESSFUL_RECOVERY, or FAILED_RECOVERY uevents depending on the
result of err_handler.error_detected() (Niklas Schnelle)
- Fix a NULL pointer dereference in aer_ratelimit() when ACPI GHES
error information identifies a device without an AER Capability
(Breno Leitao)
- Update error decoding and TLP Log printing for new errors in
current PCIe base spec (Lukas Wunner)
- Update error recovery documentation to match the current code
and use consistent nomenclature (Lukas Wunner)
ASPM:
- Enable all ClockPM and ASPM states for devicetree platforms, since
there's typically no firmware that enables ASPM
This is a risky change that may uncover hardware or configuration
defects at boot-time rather than when users enable ASPM via sysfs
later. Booting with "pcie_aspm=off" prevents this enabling
(Manivannan Sadhasivam)
- Remove the qcom code that enabled ASPM (Manivannan Sadhasivam)
Power management:
- If a device has already been disconnected, e.g., by a hotplug
removal, don't bother trying to resume it to D0 when detaching the
driver.
This avoids annoying "Unable to change power state from D3cold to
D0" messages (Mario Limonciello)
- Ensure devices are powered up before config reads for
'max_link_width', 'current_link_speed', 'current_link_width',
'secondary_bus_number', and 'subordinate_bus_number' sysfs files.
This prevents using invalid data (~0) in drivers or lspci and,
depending on how the PCIe controller reports errors, may avoid
error interrupts or crashes (Brian Norris)
Virtualization:
- Add rescan/remove locking when enabling/disabling SR-IOV, which
avoids list corruption on s390, where disabling SR-IOV also
generates hotplug events (Niklas Schnelle)
Peer-to-peer DMA:
- Free struct p2p_pgmap, not a member within it, in the
pci_p2pdma_add_resource() error path (Sungho Kim)
Endpoint framework:
- Document sysfs interface for BAR assignment of vNTB endpoint
functions (Jerome Brunet)
- Fix array underflow in endpoint BAR test case (Dan Carpenter)
- Skip endpoint IRQ test if the IRQ is out of range to avoid false
errors (Christian Bruel)
- Fix endpoint test case for controllers with fixed-size BARs smaller
than requested by the test (Marek Vasut)
- Restore inbound translation when disabling doorbell so the endpoint
doorbell test case can be run more than once (Niklas Cassel)
- Avoid a NULL pointer dereference when releasing DMA channels in
endpoint DMA test case (Shin'ichiro Kawasaki)
- Convert tegra194 interrupt number to MSI vector to fix endpoint
Kselftest MSI_TEST test case (Niklas Cassel)
- Reset tegra194 BARs when running in endpoint mode so the BAR tests
don't overwrite the ATU settings in BAR4 (Niklas Cassel)
- Handle errors in tegra194 BPMP transactions so we don't mistakenly
skip future PERST# assertion (Vidya Sagar)
AMD MDB PCIe controller driver:
- Update DT binding example to separate PERST# to a Root Port stanza
to make multiple Root Ports possible in the future (Sai Krishna
Musham)
- Add driver support for PERST# being described in a Root Port
stanza, falling back to the host bridge if not found there (Sai
Krishna Musham)
Freescale i.MX6 PCIe controller driver:
- Enable the 3.3V Vaux supply if available so devices can request
wakeup with either Beacon or WAKE# (Richard Zhu)
MediaTek PCIe Gen3 controller driver:
- Add optional sys clock ready time setting to avoid sys_clk_rdy
signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno)
- Add DT binding and driver support for MT6991 and MT8196
(AngeloGioacchino Del Regno)
NVIDIA Tegra PCIe controller driver:
- When asserting PERST#, disable the controller instead of mistakenly
disabling the PLL twice (Nagarjuna Kristam)
- Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
Qualcomm PCIe controller driver:
- Select PCI Power Control Slot driver so slot voltage rails can be
turned on/off if described in Root Port devicetree node (Qiang Yu)
- Parse only PCI bridge child nodes in devicetree, skipping unrelated
nodes such as OPP (Operating Performance Points), which caused
probe failures (Krishna Chaitanya Chundru)
- Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang)
- Consolidate Root Port 'phy' and 'reset' properties in struct
qcom_pcie_port, regardless of whether we got them from the Root
Port node or the host bridge node (Manivannan Sadhasivam)
- Fetch and map the ELBI register space in the DWC core rather than
in each driver individually (Krishna Chaitanya Chundru)
- Enable ECAM mechanism in DWC core by setting up iATU with 'CFG
Shift Feature' and use this in the qcom driver (Krishna Chaitanya
Chundru)
- Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya
Chundru)
- Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm
Glymur, which is compatible with X1E80100 but doesn't have the
cnoc_sf_axi clock (Qiang Yu)
Renesas R-Car PCIe controller driver:
- Fix a typo that prevented correct PHY initialization (Marek Vasut)
- Add a missing 1ms delay after PWR reset assertion as required by
the V4H manual (Marek Vasut)
- Assure reset has completed before DBI access to avoid SError (Marek
Vasut)
- Fix inverted PHY initialization check, which sometimes led to
timeouts and failure to start the controller (Marek Vasut)
- Pass the correct IRQ domain to generic_handle_domain_irq() to fix a
regression when converting to msi_create_parent_irq_domain()
(Claudiu Beznea)
- Drop the spinlock protecting the PMSR register - it's no longer
required since pci_lock already serializes accesses (Marek Vasut)
- Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
SOPHGO PCIe controller driver:
- Check for existence of struct cdns_pcie.ops before using it to
allow Cadence drivers that don't need to supply ops (Chen Wang)
- Add DT binding and driver for the SOPHGO SG2042 PCIe controller
(Chen Wang)
STMicroelectronics STM32MP25 PCIe controller driver:
- Update pinctrl documentation of initial states and use in runtime
suspend/resume (Christian Bruel)
- Add pinctrl_pm_select_init_state() for use by stm32 driver, which
needs it during resume (Christian Bruel)
- Add devicetree bindings and drivers for the STMicroelectronics
STM32MP25 in host and endpoint modes (Christian Bruel)
Synopsys DesignWare PCIe controller driver:
- Add support for x16 in devicetree 'num-lanes' property (Konrad
Dybcio)
- Verify that if DT specifies a single IRQ for all eDMA channels, it
is named 'dma' (Niklas Cassel)
TI J721E PCIe driver:
- Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth
Vadapalli)
- Power controller off before configuring the glue layer so the
controller latches the correct values on power-on (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver
exits with error (Siddharth Vadapalli)
- Add Peripheral Virtualization Unit (PVU), which restricts DMA from
PCIe devices to specific regions of host memory, to the ti,am65
binding (Jan Kiszka)
Xilinx NWL PCIe controller driver:
- Clear bootloader E_ECAM_CONTROL before merging in the new driver
value to avoid writing invalid values (Jani Nurminen)"
* tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (141 commits)
PCI/AER: Avoid NULL pointer dereference in aer_ratelimit()
MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers
PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25
dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings
PCI: stm32: Add PCIe host support for STM32MP25
PCI: xilinx-nwl: Fix ECAM programming
PCI: j721e: Fix incorrect error message in probe()
PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit
dt-bindings: PCI: qcom,pcie-x1e80100: Set clocks minItems for the fifth Glymur PCIe Controller
PCI: dwc: Support 16-lane operation
PCI: Add lockdep assertion in pci_stop_and_remove_bus_device()
PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock
PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0()
PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock
PCI: rcar-gen4: Fix inverted break condition in PHY initialization
PCI: rcar-gen4: Assure reset occurs before DBI access
PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion
PCI: Set up bridge resources earlier
PCI: rcar-host: Drop PMSR spinlock
...
|
||
|
Linus Torvalds
|
e4c0fdd5af |
Merge tag 'dmaengine-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul: "A couple of new device support and small driver updates for this round. New support: - Intel idxd Wildcat Lake family support - SpacemiT K1 PDMA controller support - Renesas RZ/G3E family support Updates: - Xilinx shutdown support and dma client properties update - Designware edma callback_result support" * tag 'dmaengine-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dt-bindings: dma: rz-dmac: Document RZ/G3E family of SoCs dmaengine: dw-edma: Set status for callback_result dmaengine: mv_xor: match alloc_wc and free_wc dmaengine: mmp_pdma: Add SpacemiT K1 PDMA support with 64-bit addressing dmaengine: mmp_pdma: Add operations structure for controller abstraction dmaengine: mmp_pdma: Add reset controller support dmaengine: mmp_pdma: Add clock support dt-bindings: dma: Add SpacemiT K1 PDMA controller dt-bindings: dmaengine: xilinx_dma: Remove DMA client properties dmaengine: Fix dma_async_tx_descriptor->tx_submit documentation dmaengine: xilinx_dma: Support descriptor setup from dma_vecs dmaengine: sh: setup_xref error handling dmaengine: Replace zero-length array with flexible-array dmaengine: ppc4xx: Remove space before newline dmaengine: idxd: Add a new IAA device ID for Wildcat Lake family platforms dmaengine: idxd: Replace memset(0) + strscpy() with strscpy_pad() dt-bindings: dma: nvidia,tegra20-apbdma: Add undocumented compatibles and "clock-names" dmaengine: zynqmp_dma: Add shutdown operation support |
||
|
Linus Torvalds
|
1d1ba4d390 |
Merge tag 'phy-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"The usual bunch of device support and update to drivers.
New Support
- Qualcomm SM8750 QMP PCIe PHY dual lane support, PMIV0104 eusb2
repeater support, QCS8300 eDP PHY support
- Renesas RZ/T2H and RZ/N2H support and updates to driver for that
- TI TCAN1051 phy support
- Rockchip rk3588 dphy support, RK3528 combphy support
Updates:
- cadence updates for calibration and polling for ready and enabling
of lower resolutions, runtime pm support,
- Rockchip: enable U3 otg port
- Renesas USXGMII mode support
- Qualcomm UFS PHY and PLL regulator load support"
* tag 'phy-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (64 commits)
phy: rockchip: phy-rockchip-inno-csidphy: add support for rk3588 variant
phy: rockchip: phy-rockchip-inno-csidphy: allow for different reset lines
phy: rockchip: phy-rockchip-inno-csidphy: allow writes to grf register 0
dt-bindings: phy: rockchip-inno-csi-dphy: add rk3588 variant
dt-bindings: phy: rockchip-inno-csi-dphy: make power-domains non-required
phy: cadence: cdns-dphy: Enable lower resolutions in dphy
phy: renesas: r8a779f0-ether-serdes: add new step added to latest datasheet
phy: renesas: r8a779f0-ether-serdes: add USXGMII mode
phy: sophgo: Add USB 2.0 PHY driver for Sophgo CV18XX/SG200X
dt-bindings: phy: Add Sophgo CV1800 USB phy
phy: cadence: cdns-dphy: Update calibration wait time for startup state machine
phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling
phy: renesas: rcar-gen3-usb2: Fix ID check logic with VBUS valid
dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1051
phy: lynx-28g: check return value when calling lynx_28g_pll_get
phy: qcom: m31-eusb2: Fix the error log while enabling clock
phy: rockchip: usbdp: Remove redundant ternary operators
phy: renesas: rcar-gen3-usb2: Remove redundant ternary operators
phy: hisilicon: Remove redundant ternary operators
phy: qcom-qmp-ufs: Add PHY and PLL regulator load
...
|
||
|
Linus Torvalds
|
4b616669d1 |
Merge tag 'ata-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Damien Le Moal: - Improve the DT bindings documentation for the highbanck, imx and xgene-ahci controllers (Krzysztof, Fabio, Rob) * tag 'ata-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: dt-bindings: ata: apm,xgene-ahci: Add apm,xgene-ahci-v2 support dt-bindings: ata: imx: Document 'target-supply' dt-bindings: ata: highbank: Minor whitespace cleanup in example |
||
|
Rob Herring (Arm)
|
a6b4f791cd |
dt-bindings: rtc: Convert apm,xgene-rtc to DT schema
Convert the APM XGene RTC binding to DT schema format. It's a straight-forward conversion. Signed-off-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250924222848.2949235-1-robh@kernel.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> |
||
|
Linus Torvalds
|
6a74422b97 |
Merge tag 'mips_6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer: - switch longson32 platform to DT and use MIPS_GENERIC framework - cleanups/fixes for lantiq DTs - other cleanups and fixes * tag 'mips_6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (30 commits) mips: math-emu: replace deprecated strcpy() in me-debugfs MIPS: configs: Consolidate Loongson1 defconfigs MIPS: Unify Loongson1 PRID_REV MIPS: loongson32: Switch to generic core MIPS: loongson: Add built-in DTB support MIPS: dts: loongson: Add CQ-T300B board MIPS: dts: loongson: Add Smartloong-1C board MIPS: dts: loongson: Add LSGZ_1B_DEV board MIPS: dts: loongson: Add LS1B-DEMO board dt-bindings: mips: loongson: Add LS1B-DEMO and CQ-T300B mips: lantiq: danube: rename stp node on EASY50712 reference board mips: lantiq: xway: sysctrl: rename stp clock MIPS: RB532: Replace deprecated strcpy() with memcpy() and strscpy() MIPS: Loongson64: Replace deprecated strcpy() with strscpy_pad() MIPS: generic: Replace deprecated strcpy() in ocelot_detect() MIPS: octeon: Replace deprecated strcpy() in octeon_model_get_string_buffer() MIPS: octeon: Replace memset(0) + deprecated strcpy() with strscpy_pad() MIPS: arc: Replace deprecated strcpy() with memcpy() MIPS: txx9: Replace deprecated strcpy() with strscpy() MIPS: sni: Replace deprecated strcpy() in sni_console_setup() ... |
||
|
Linus Torvalds
|
6093a688a0 |
Merge tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO/Binder updates from Greg KH:
"Here is the big set of char/misc/iio and other driver subsystem
changes for 6.18-rc1.
Loads of different stuff in here, it was a busy development cycle in
lots of different subsystems, with over 27k new lines added to the
tree.
Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust.
This is the big one, and was driving a huge majority of the rust
binding work over the past years. Right now there are two binder
drivers in the kernel, selected only at build time as to which one
to use as binder wants to be included in the system at boot time.
The binder C maintainers all agreed on this, as eventually, they
want the C code to be removed from the tree, but it will take a few
releases to get there while both are maintained to ensure that the
rust implementation is fully stable and compliant with the existing
userspace apis.
All of these have been in linux-next for a while"
* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
rust: usb: keep usb::Device private for now
rust: usb: don't retain device context for the interface parent
USB: disable rust bindings from the build for now
samples: rust: add a USB driver sample
rust: usb: add basic USB abstractions
coresight: Add label sysfs node support
dt-bindings: arm: Add label in the coresight components
coresight: tnoc: add new AMBA ID to support Trace Noc V2
coresight: Fix incorrect handling for return value of devm_kzalloc
coresight: tpda: fix the logic to setup the element size
coresight: trbe: Return NULL pointer for allocation failures
coresight: Refactor runtime PM
coresight: Make clock sequence consistent
coresight: Refactor driver data allocation
coresight: Consolidate clock enabling
coresight: Avoid enable programming clock duplicately
coresight: Appropriately disable trace bus clocks
coresight: Appropriately disable programming clocks
coresight: etm4x: Support atclk
coresight: catu: Support atclk
...
|
||
|
Linus Torvalds
|
c6006b8ca1 |
Merge tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and thunderbolt drivers for 6.18-rc1. It
was another normal development cycle, with lots of the usual drivers
getting updates:
- Thunderbolt driver cleanups and additions
- dwc3 driver updates
- dwc2 driver updates
- typec driver updates
- xhci driver updates and additions
- offload USB engine updates for better power management
- unused tracepoint removals
- usb gadget fixes and updates as more users start to rely on these
drivers instead of the "old" function gadget drivers
- new USB device ids
- other minor driver USB driver updates
- new USB I/O driver framework and driver additions"
The last item, the usb i/o driver, has an i2c and gpio driver added
through this tree. Those drivers were acked by the respective
subsystem maintainers.
All of these have been in linux-next for a while"
* tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (132 commits)
usb: vhci-hcd: Prevent suspending virtually attached devices
USB: serial: option: add SIMCom 8230C compositions
thunderbolt: Fix use-after-free in tb_dp_dprx_work
usb: xhci: align PORTSC trace with one-based port numbering
usb: xhci: correct indentation for PORTSC tracing function
usb: xhci: improve TR Dequeue Pointer mask
usb: xhci-pci: add support for hosts with zero USB3 ports
usb: xhci: Update a comment about Stop Endpoint retries
Revert "usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running"
usb: gadget: f_rndis: Refactor bind path to use __free()
usb: gadget: f_ecm: Refactor bind path to use __free()
usb: gadget: f_acm: Refactor bind path to use __free()
usb: gadget: f_ncm: Refactor bind path to use __free()
usb: gadget: Introduce free_usb_request helper
usb: gadget: Store endpoint pointer in usb_request
usb: host: xhci-rcar: Add Renesas RZ/G3E USB3 Host driver support
usb: host: xhci-plat: Add .post_resume_quirk for struct xhci_plat_priv
usb: host: xhci-rcar: Move R-Car reg definitions
dt-bindings: usb: Document Renesas RZ/G3E USB3HOST
usb: gadget: f_fs: Fix epfile null pointer access after ep enable.
...
|
||
|
Linus Torvalds
|
5d2f4730bb |
Merge tag 'tty-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here are some small updates for tty/serial drivers for 6.18-rc1.
Not many changes overall, just the usual:
- abi cleanups and reworking of the tty functions by Jiri by adding
console lock guard logic
- 8250_platform driver updates
- qcom-geni driver updates
- other minor serial driver updates
- some more vt escape codes added
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (43 commits)
tty: serial: fix help message for SERIAL_CPM
serial: 8250: omap: Support wakeup pinctrl state on suspend
dt-bindings: serial: 8250_omap: Add wakeup pinctrl state
serial: max310x: improve interrupt handling
vt: move vc_saved_screen to within tty allocated judgment
Revert "m68k: make HPDCA and HPAPCI bools"
tty: remove redundant condition checks
tty/vt: Add missing return value for VT_RESIZE in vt_ioctl()
vt: remove redundant check on vc_mode in con_font_set()
serial: qcom-geni: Add DFS clock mode support to GENI UART driver
m68k: make HPDCA and HPAPCI bools
tty: n_gsm: Don't block input queue by waiting MSC
serial: qcom-geni: Fix off-by-one error in ida_alloc_range()
serdev: Drop dev_pm_domain_detach() call
serial: sc16is7xx: drop redundant conversion to bool
vt: add support for smput/rmput escape codes
serial: stm32: allow selecting console when the driver is module
serial: 8250_core: fix coding style issue
tty: serial: Modify the use of dev_err_probe()
s390/char/con3270: use tty_port_tty guard()
...
|
||
|
Linus Torvalds
|
cc07b0a3af |
Merge tag 'mtd/for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD core:
- Bad blocks increment is skipped if the block is already known bad
(improves user statistics relevance)
- Expose the OOB layout via debugfs
Raw NAND:
- Add support for Loongson-2K1000 and Loongson-2K0500 NAND
controllers, including extra features, such as chip select
and 6-byte NAND ID reading support
- Drop the s3c2410 driver
SPI NAND:
- Important SPI NAND continuous read improvements and fixes
- Add support for FudanMicro FM25S01A
- Add support for continuous reads in Gigadevice vendor driver
ECC:
- Add support for the Realtek ECC engine
SPI NOR:
- Some flashes can't perform reads or writes with start or end being
an odd number in Octal DTR mode. File systems like UBIFS can
request such reads or writes, causing the transaction to error out.
Pad the read or write transactions with extra bytes to avoid this
problem.
And the usual amount of various miscellaneous fixes"
* tag 'mtd/for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (46 commits)
mtd: rawnand: sunxi: drop unused module alias
mtd: rawnand: stm32_fmc2: drop unused module alias
mtd: rawnand: rockchip: drop unused module alias
mtd: rawnand: pl353: drop unused module alias
mtd: rawnand: omap2: drop unused module alias
mtd: rawnand: atmel: drop unused module alias
mtd: onenand: omap2: drop unused module alias
mtd: hyperbus: hbmc-am654: drop unused module alias
mtd: jedec_probe: use struct_size() helper for cfiq allocation
mtd: cfi: use struct_size() helper for cfiq allocation
mtd: nand: raw: gpmi: fix clocks when CONFIG_PM=N
mtd: rawnand: omap2: fix device leak on probe failure
mtd: rawnand: atmel: Fix error handling path in atmel_nand_controller_add_nands
mtd: nand: realtek-ecc: Add Realtek external ECC engine support
dt-bindings: mtd: Add realtek,rtl9301-ecc
mtd: spinand: repeat reading in regular mode if continuous reading fails
mtd: spinand: try a regular dirmap if creating a dirmap for continuous reading fails
mtd: spinand: fix direct mapping creation sizes
mtd: rawnand: fsmc: Default to autodetect buswidth
mtd: nand: move nand_check_erased_ecc_chunk() to nand/core
...
|
||
|
Linus Torvalds
|
c35f902cb3 |
Merge tag 'rproc-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson: - Enable coredump support for the i.MX HiFi core remoteproc, and clean up the i.MX remoteproc driver. - Introduce remoteprocs on the Qualcomm Milos platform. Gracefully shut own the ADSP remoteproc when bootloader has loaded the "Lite" firmware on X Elite. Improve the resource handover procedure to avoid possibly duplicate handling. - Transition the TI DA8xx, TI Keystone, and TI Wakeup M3 remoteproc drivers to handle resources using devres. * tag 'rproc-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (29 commits) remoteproc: pru: Fix potential NULL pointer dereference in pru_rproc_set_ctable() remoteproc: qcom: pas: Drop redundant assignment to ret remoteproc: qcom: pas: Shutdown lite ADSP DTB on X1E remoteproc: qcom: q6v5: Avoid handling handover twice remoteproc: qcom: q6v5: Avoid disabling handover IRQ twice remoteproc: qcom: pas: Add Milos remoteproc support dt-bindings: remoteproc: qcom,milos-pas: Document remoteprocs remoteproc: qcom_q6v5_mss: support loading MBN file on msm8974 remoteproc: imx_rproc: Clean up after ops introduction remoteproc: imx_rproc: Simplify IMX_RPROC_SMC switch case remoteproc: imx_rproc: Simplify IMX_RPROC_SCU_API switch case remoteproc: imx_rproc: Simplify IMX_RPROC_MMIO switch case remoteproc: imx_rproc: Move imx_rproc_dcfg closer to imx_rproc_of_match remoteproc: imx_rproc: Introduce start/stop/detect_mode ops for imx_rproc_dcfg remoteproc: k3: Correctly release some resources allocated in k3_rproc_request_mbox() remoteproc: wkup_m3: Use devm_rproc_add() helper remoteproc: wkup_m3: Use devm_rproc_alloc() helper remoteproc: wkup_m3: Use devm action to call PM runtime put sync remoteproc: wkup_m3: Use devm_pm_runtime_enable() helper remoteproc: keystone: Use devm_rproc_add() helper ... |
||
|
Linus Torvalds
|
b66451723c |
Merge tag 'platform-drivers-x86-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- amd/pmf:
- Add support for adjusting PMF PPT and PPT APU thresholds
- Extend custom BIOS inputs for more policies
- Update ta_pmf_action structure to the latest PMF TA
- arm64:
- thinkpad-t14s-ec: Add EC driver for ThinkPad T14s Gen6 Snapdragon
- int3472:
- Increase handshake GPIO delay
- intel/pmc:
- SSRAM support for Lunar Lake and Panther Lake
- Support reading substate requirements data from S0ix blockers
(for platforms starting from Panther Lake)
- Wildcat Lake support
- intel-uncore-freq:
- Solve duplicate sysfs entry warnings
- Present unique domain ID per package
- portwell-ec:
- Support suspend/resume
- Add hwmon support for voltage and temperature
- redmi-wmi:
- Add WMI driver for Redmibook keyboard
- think-lmi:
- Certificate support for ThinkCenter
- x86-android-tables + others:
- Convert away from legacy GPIO APIs
- x86-android-tables:
- Add support for Acer A1-840 tablet
- Fix modules list for Lenovo devices
- Stop using EPROBE_DEFER
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (63 commits)
platform/x86: pcengines-apuv2: Use static device properties
platform/x86: meraki-mx100: Use static device properties
platform/x86: barco-p50-gpio: use software nodes for gpio-leds/keys
platform/x86: x86-android-tablets: Stop using EPROBE_DEFER
platform/x86: x86-android-tablets: Fix modules lists for Lenovo devices
platform/x86: x86-android-tablets: Simplify lenovo_yoga_tab2_830_1050_exit()
platform/x86: x86-android-tablets: Add support for Acer A1-840 tablet
platform/x86: x86-android-tablets: Move Acer info to its own file
platform/x86: x86-android-tablets: Update my email address
platform/x86: x86-android-tablets: Simplify node-group [un]registration
platform/x86: x86-android-tablets: use swnode_group instead of manual registering
platform/x86: x86-android-tablets: replace bat_swnode with swnode_group
platform/x86: x86-android-tablets: convert gpio_keys devices to GPIO references
platform/x86: x86-android-tablets: remove support for GPIO lookup tables
platform/x86: x86-android-tablets: convert Yoga Tab2 fast charger to GPIO references
platform/x86: x86-android-tablets: convert HID-I2C devices to GPIO references
platform/x86: x86-android-tablets: convert wm1502 devices to GPIO references
platform/x86: x86-android-tablets: convert int3496 devices to GPIO references
platform/x86: x86-android-tablets: convert EDT devices to GPIO references
platform/x86: x86-android-tablets: convert Novatek devices to GPIO references
...
|
||
|
Linus Torvalds
|
908057d185 |
Merge tag 'v6.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu: "Drivers: - Add ciphertext hiding support to ccp - Add hashjoin, gather and UDMA data move features to hisilicon - Add lz4 and lz77_only to hisilicon - Add xilinx hwrng driver - Add ti driver with ecb/cbc aes support - Add ring buffer idle and command queue telemetry for GEN6 in qat Others: - Use rcu_dereference_all to stop false alarms in rhashtable - Fix CPU number wraparound in padata" * tag 'v6.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (78 commits) dt-bindings: rng: hisi-rng: convert to DT schema crypto: doc - Add explicit title heading to API docs hwrng: ks-sa - fix division by zero in ks_sa_rng_init KEYS: X.509: Fix Basic Constraints CA flag parsing crypto: anubis - simplify return statement in anubis_mod_init crypto: hisilicon/qm - set NULL to qm->debug.qm_diff_regs crypto: hisilicon/qm - clear all VF configurations in the hardware crypto: hisilicon - enable error reporting again crypto: hisilicon/qm - mask axi error before memory init crypto: hisilicon/qm - invalidate queues in use crypto: qat - Return pointer directly in adf_ctl_alloc_resources crypto: aspeed - Fix dma_unmap_sg() direction rhashtable: Use rcu_dereference_all and rcu_dereference_all_check crypto: comp - Use same definition of context alloc and free ops crypto: omap - convert from tasklet to BH workqueue crypto: qat - Replace kzalloc() + copy_from_user() with memdup_user() crypto: caam - double the entropy delay interval for retry padata: WQ_PERCPU added to alloc_workqueue users padata: replace use of system_unbound_wq with system_dfl_wq crypto: cryptd - WQ_PERCPU added to alloc_workqueue users ... |
||
|
Linus Torvalds
|
86bcf7be1e |
Merge tag 'riscv-for-linus-6.18-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Paul Walmsley:
- Support for the RISC-V-standardized RPMI interface.
RPMI is a platform management communication mechanism between OSes
running on application processors, and a remote platform management
processor. Similar to ARM SCMI, TI SCI, etc. This includes irqchip,
mailbox, and clk changes.
- Support for the RISC-V-standardized MPXY SBI extension.
MPXY is a RISC-V-specific standard implementing a shared memory
mailbox between S-mode operating systems (e.g., Linux) and M-mode
firmware (e.g., OpenSBI). It is part of this PR since one of its use
cases is to enable M-mode firmware to act as a single RPMI client for
all RPMI activity on a core (including S-mode RPMI activity).
Includes a mailbox driver.
- Some ACPI-related updates to enable the use of RPMI and MPXY.
- The addition of Linux-wide memcpy_{from,to}_le32() static inline
functions, for RPMI use.
- An ACPI Kconfig change to enable boot logos on any ACPI-using
architecture (including RISC-V)
- A RISC-V defconfig change to add GPIO keyboard and event device
support, for front panel shutdown or reboot buttons
* tag 'riscv-for-linus-6.18-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (26 commits)
clk: COMMON_CLK_RPMI should depend on RISCV
ACPI: support BGRT table on RISC-V
MAINTAINERS: Add entry for RISC-V RPMI and MPXY drivers
RISC-V: Enable GPIO keyboard and event device in RV64 defconfig
irqchip/riscv-rpmi-sysmsi: Add ACPI support
mailbox/riscv-sbi-mpxy: Add ACPI support
irqchip/irq-riscv-imsic-early: Export imsic_acpi_get_fwnode()
ACPI: RISC-V: Add RPMI System MSI to GSI mapping
ACPI: RISC-V: Add support to update gsi range
ACPI: RISC-V: Create interrupt controller list in sorted order
ACPI: scan: Update honor list for RPMI System MSI
ACPI: Add support for nargs_prop in acpi_fwnode_get_reference_args()
ACPI: property: Refactor acpi_fwnode_get_reference_args() to support nargs_prop
irqchip: Add driver for the RPMI system MSI service group
dt-bindings: Add RPMI system MSI interrupt controller bindings
dt-bindings: Add RPMI system MSI message proxy bindings
clk: Add clock driver for the RISC-V RPMI clock service group
dt-bindings: clock: Add RPMI clock service controller bindings
dt-bindings: clock: Add RPMI clock service message proxy bindings
mailbox: Add RISC-V SBI message proxy (MPXY) based mailbox driver
...
|
||
|
Wolfram Sang
|
1884f54e48 |
Merge tag 'i2c-host-6.18-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host for v6.18, part 2 rtl9300 updates: - general cleanups - implemented block read/write support - added RTL9310 support |
||
|
Jonas Jelonek
|
99fd09e01d |
dt-bindings: i2c: realtek,rtl9301-i2c: extend for RTL9310 support
Adjust the regex for child-node address to account for the fact that RTL9310 supports 12 instead of only 8 SDA lines. Also, narrow this per variant. Add a vendor-specific property to explicitly specify the SCL line number of the defined I2C controller/master. This is required, in particular for RTL9310, to operate on the correct SCL for each controller. Require this property to be specified for RTL9310. Add compatibles for known SoC variants RTL9311, RTL9312 and RTL9313. Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250927101931.71575-9-jelonek.jonas@gmail.com |
||
|
Jonas Jelonek
|
0395a5e8fd |
dt-bindings: i2c: realtek,rtl9301-i2c: fix wording and typos
Fix wording of binding description to use plural because there is not only a single RTL9300 SoC. RTL9300 describes a whole family of Realtek SoCs. Add missing word 'of' in description of reg property. Change 'SDA pin' to 'SDA line number' because the property must contain the SDA (channel) number ranging from 0-7 instead of a real pin number. Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # On RTL9302C based board Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Link: https://lore.kernel.org/r/20250927101931.71575-3-jelonek.jonas@gmail.com |
||
|
Linus Torvalds
|
d955299b5c |
Merge tag 'soc-fixes-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC build fix from Arnd Bergmann: "One commit for the dt bindings was missing from the dt branch, this one is already pending in the clk tree that contains the corresponding device driver" * tag 'soc-fixes-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: dt-bindings: clock: Add ARTPEC-8 clock controller |
||
|
Linus Torvalds
|
674b0ddb75 |
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley: "Usual driver updates (ufs, mpi3mr, lpfc, pm80xx, mpt3sas) plus assorted cleanups and fixes. The only core update is to sd.c and is mostly cosmetic" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (105 commits) scsi: MAINTAINERS: Update FC element owners scsi: mpt3sas: Update driver version to 54.100.00.00 scsi: mpt3sas: Add support for 22.5 Gbps SAS link rate scsi: mpt3sas: Suppress unnecessary IOCLogInfo on CONFIG_INVALID_PAGE scsi: mpt3sas: Fix crash in transport port remove by using ioc_info() scsi: ufs: ufs-qcom: Add support for limiting HS gear and rate scsi: ufs: pltfrm: Add DT support to limit HS gear and gear rate scsi: ufs: ufs-qcom: Remove redundant re-assignment to hs_rate scsi: ufs: dt-bindings: Document gear and rate limit properties scsi: ufs: core: Fix data race in CPU latency PM QoS request handling scsi: libfc: Fix potential buffer overflow in fc_ct_ms_fill() scsi: storvsc: Remove redundant ternary operators scsi: ufs: core: Change MCQ interrupt enable flow scsi: smartpqi: Replace kmalloc() + copy_from_user() with memdup_user() scsi: hpsa: Replace kmalloc() + copy_from_user() with memdup_user() scsi: hpsa: Fix potential memory leak in hpsa_big_passthru_ioctl() scsi: lpfc: Copyright updates for 14.4.0.11 patches scsi: lpfc: Update lpfc version to 14.4.0.11 scsi: lpfc: Convert debugfs directory counts from atomic to unsigned int scsi: lpfc: Clean up extraneous phba dentries ... |
||
|
Linus Torvalds
|
ee2fe81cdc |
Merge tag 'docs-6.18' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It has been a relatively busy cycle in docsland, with changes all
over:
- Bring the kernel memory-model docs into the Sphinx build in the
"literal include" mode.
- Lots of build-infrastructure work, further cleaning up long-term
kernel-doc technical debt. The sphinx-pre-install tool has been
converted to Python and updated for current systems.
- A new tool to detect when documents have been moved and generate
HTML redirects; this can be used on kernel.org (or any other site
hosting the rendered docs) to avoid breaking links.
- Automated processing of the YAML files describing the netlink
protocol.
- A significant update of the maintainer's PGP guide.
... and a seemingly endless series of typo fixes, build-problem fixes,
etc"
* tag 'docs-6.18' of git://git.lwn.net/linux: (193 commits)
Documentation/features: Update feature lists for 6.17-rc7
docs: remove cdomain.py
Documentation/process: submitting-patches: fix typo in "were do"
docs: dev-tools/lkmm: Fix typo of missing file extension
Documentation: trace: histogram: Convert ftrace docs cross-reference
Documentation: trace: histogram-design: Wrap introductory note in note:: directive
Documentation: trace: historgram-design: Separate sched_waking histogram section heading and the following diagram
Documentation: trace: histogram-design: Trim trailing vertices in diagram explanation text
Documentation: trace: histogram: Fix histogram trigger subsection number order
docs: driver-api: fix spelling of "buses".
Documentation: fbcon: Use admonition directives
Documentation: fbcon: Reindent 8th step of attach/detach/unload
Documentation: fbcon: Add boot options and attach/detach/unload section headings
docs: filesystems: sysfs: add remaining top level sysfs directory descriptions
docs: filesystems: sysfs: clarify symlink destinations in dev and bus/devices descriptions
docs: filesystems: sysfs: remove top level sysfs net directory
docs: maintainer: Fix ambiguous subheading formatting
docs: kdoc: a few more dump_typedef() tweaks
docs: kdoc: remove redundant comment stripping in dump_typedef()
docs: kdoc: remove some dead code in dump_typedef()
...
|
||
|
Bjorn Helgaas
|
30eccd3b7d |
Merge branch 'pci/controller/stm32'
- Update pinctrl documentation of initial states and use in runtime suspend/resume (Christian Bruel) - Add pinctrl_pm_select_init_state() for use by stm32 driver, which needs it during resume (Christian Bruel) - Add devicetree bindings and drivers for the STMicroelectronics STM32MP25 in host and endpoint modes (Christian Bruel) * pci/controller/stm32: MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25 dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings PCI: stm32: Add PCIe host support for STM32MP25 dt-bindings: PCI: Add STM32MP25 PCIe Root Complex bindings pinctrl: Add pinctrl_pm_select_init_state helper function Documentation: pinctrl: Describe PM helper functions for standard states. |
||
|
Bjorn Helgaas
|
0157e111db |
Merge branch 'pci/controller/sophgo'
- Check for existence of struct cdns_pcie.ops before using it to allow Cadence drivers that don't need to supply ops (Chen Wang) - Add DT binding and driver for the Sophgo SG2042 PCIe controller (Chen Wang) * pci/controller/sophgo: PCI: sg2042: Add Sophgo SG2042 PCIe driver PCI: cadence: Check for the existence of cdns_pcie::ops before using it dt-bindings: pci: Add Sophgo SG2042 PCIe host |
||
|
Bjorn Helgaas
|
dde4b05e26 |
Merge branch 'pci/controller/mediatek-gen3'
- Add optional sys clock ready time setting to avoid sys_clk_rdy signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno) - Add DT binding and driver support for MT6991 and MT8196 (AngeloGioacchino Del Regno) * pci/controller/mediatek-gen3: PCI: mediatek-gen3: Add support for MediaTek MT8196 SoC dt-bindings: PCI: mediatek-gen3: Add support for MT6991/MT8196 PCI: mediatek-gen3: Implement sys clock ready time setting |
||
|
Bjorn Helgaas
|
df1d435baa |
Merge branch 'pci/controller/amd-mdb'
- Update DT binding example to separate PERST# to a Root Port stanza to make multiple Root Ports possible in the future (Sai Krishna Musham) - Add driver support for Root Port PERST# (Sai Krishna Musham) * pci/controller/amd-mdb: PCI: amd-mdb: Add support for PCIe RP PERST# signal handling dt-bindings: PCI: amd-mdb: Add example usage of reset-gpios for PCIe RP PERST# |
||
|
Linus Torvalds
|
07fdad3a93 |
Merge tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- Improve drop account scalability on NUMA hosts for RAW and UDP
sockets and the backlog, almost doubling the Pps capacity under DoS
- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance
by an additional 50%, even more under extreme conditions
- Add support for PSP encryption of TCP connections; this mechanism
has some similarities with IPsec and TLS, but offers superior HW
offloads capabilities
- Ongoing work to support Accurate ECN for TCP. AccECN allows more
than one congestion notification signal per RTT and is a building
block for Low Latency, Low Loss, and Scalable Throughput (L4S)
- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath
- Refactor skb deferral free to better scale on large multi-NUMA
hosts, this improves TCP and UDP RX performances significantly on
such HW
- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds
- Improve handling of setups with a large number of nexthop, making
dump operating scaling linearly and avoiding unneeded
synchronize_rcu() on delete
- Improve bridge handling of VLAN FDB, storing a single entry per
bridge instead of one entry per port; this makes the dump order of
magnitude faster on large switches
- Restore IP ID correctly for encapsulated packets at GSO
segmentation time, allowing GRO to merge packets in more scenarios
- Improve netfilter matching performance on large sets
- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting
recent TCP autotuning changes
- Allow bridges to redirect to a backup port when the bridge port is
administratively down
- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups
- Add RCU safety to dst->dev, closing a lot of possible races
- A significant crypto library API for SCTP, MPTCP and IPv6 SR,
reducing code duplication
- Supports pulling data from an skb frag into the linear area of an
XDP buffer
Things we sprinkled into general kernel code:
- Generate netlink documentation from YAML using an integrated YAML
parser
Driver API:
- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection
- Introduce API for fetching the DMA device for a given queue,
allowing TCP zerocopy RX on more H/W setups
- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath
- Add a new dedicated ethtool callback enabling drivers to provide
the number of RX rings directly, improving efficiency and clarity
in RX ring queries and RSS configuration
- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause
- Support for DPLL phase offset exponential moving average,
controlling the average smoothing factor
Device drivers:
- Add a new Huawei driver for 3rd gen NIC (hinic3)
- Add a new SpacemiT driver for K1 ethernet MAC
- Add a generic abstraction for shared memory communication
devices (dibps)
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention
issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link
aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts
- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level
checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages
to improve memory efficiency
- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4):
- support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups
- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115
- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory
usage
- rcar_canfd: update the CAN-FD handling
- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support
- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k):
- GTK rekey fixes
- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs"
* tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits)
net: stmmac: Add support for Allwinner A523 GMAC200
dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
Revert "Documentation: net: add flow control guide and document ethtool API"
octeontx2-pf: fix bitmap leak
octeontx2-vf: fix bitmap leak
net/mlx5e: Use extack in set rxfh callback
net/mlx5e: Introduce mlx5e_rss_params for RSS configuration
net/mlx5e: Introduce mlx5e_rss_init_params
net/mlx5e: Remove unused mdev param from RSS indir init
net/mlx5: Improve QoS error messages with actual depth values
net/mlx5e: Prevent entering switchdev mode with inconsistent netns
net/mlx5: HWS, Generalize complex matchers
net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs
selftests/net: add tcp_port_share to .gitignore
Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"
net: add NUMA awareness to skb_attempt_defer_free()
net: use llist for sd->defer_list
net: make softnet_data.defer_count an atomic
selftests: drv-net: psp: add tests for destroying devices
selftests: drv-net: psp: add test for auto-adjusting TCP MSS
...
|
||
|
Linus Torvalds
|
f79e772258 |
Merge tag 'media/v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab: - Added a new V4L2 clock helper - New camera sensor drivers - iris: Enable H.264/H.265 encoder support and fixes in iris driver common code - camss: add support for new SoC flavors - venus: add new SoC support - tc358743: support more infoframe types - Various fixes, driver improvements and cleanups * tag 'media/v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (439 commits) media: venus: pm_helpers: add fallback for the opp-table media: qcom: camss: vfe: Fix BPL alignment for QCM2290 media: tuner: xc5000: Fix use-after-free in xc5000_release media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_remove media: vsp1: Export missing vsp1_isp_free_buffer symbol media: renesas: vsp1: Convert to SYSTEM_SLEEP/RUNTIME_PM_OPS() media: renesas: ceu: Convert to RUNTIME_PM_OPS() media: renesas: fdp1: Convert to RUNTIME_PM_OPS() media: renesas: rcar-vin: Convert to DEFINE_SIMPLE_DEV_PM_OPS() media: renesas: rcar_drif: Convert to DEFINE_SIMPLE_DEV_PM_OPS() media: uvcvideo: Mark invalid entities with id UVC_INVALID_ENTITY_ID media: uvcvideo: Support UVC_CROSXU_CONTROL_IQ_PROFILE media: uvcvideo: Run uvc_ctrl_init_ctrl for all controls media: uvcvideo: Shorten the transfer size non compliance message media: uvcvideo: Do not re-reference dev->udev media: uvcvideo: Use intf instead of udev for printks media: uvcvideo: Move video_device under video_queue media: uvcvideo: Drop stream->mutex media: uvcvideo: Move MSXU_CONTROL_METADATA definition to header ... |
||
|
Linus Torvalds
|
58809f614e |
Merge tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"cross-subsystem:
- i2c-hid: Make elan touch controllers power on after panel is
enabled
- dt bindings for STM32MP25 SoC
- pci vgaarb: use screen_info helpers
- rust pin-init updates
- add MEI driver for late binding firmware update/load
uapi:
- add ioctl for reassigning GEM handles
- provide boot_display attribute on boot-up devices
core:
- document DRM_MODE_PAGE_FLIP_EVENT
- add vendor specific recovery method to drm device wedged uevent
gem:
- Simplify gpuvm locking
ttm:
- add interface to populate buffers
sched:
- Fix race condition in trace code
atomic:
- Reallow no-op async page flips
display:
- dp: Fix command length
video:
- Improve pixel-format handling for struct screen_info
rust:
- drop Opaque<> from ioctl args
- Alloc:
- BorrowedPage type and AsPageIter traits
- Implement Vmalloc::to_page() and VmallocPageIter
- DMA/Scatterlist:
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and sg_table
- DRM:
- simplify use of generics
- add DriverFile type alias
- drop Object::SIZE
- Rust:
- pin-init tree merge
- Various methods for AsBytes and FromBytes traits
gpuvm:
- Support madvice in Xe driver
gpusvm:
- fix hmm_pfn_to_map_order usage in gpusvm
bridge:
- Improve and fix ref counting on bridge management
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
- Support Content Protection property
- display-connector: Improve DP display detection
- Add support for Radxa Ra620 plus DT bindings
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
- adv7511: Write full Audio infoframe
- ite6263: Support vendor-specific infoframes
- simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
- ilitek-ili9881c: Refactor mode setting; Add support for Bestar
BSD1218-A101KL68 LCD plus DT bindings
- lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
- edp: Add support for additonal mt8189 Chromebook panels
- lvds: Add DT bindings for EDT ETML0700Z8DHA
amdgpu:
- add CRIU support for gem objects
- RAS updates
- VCN SRAM load fixes
- EDID read fixes
- eDP ALPM support
- Documentation updates
- Rework PTE flag generation
- DCE6 fixes
- VCN devcoredump cleanup
- MMHUB client id fixes
- VCN 5.0.1 RAS support
- SMU 13.0.x updates
- Expanded PCIe DPC support
- Expanded VCN reset support
- VPE per queue reset support
- give kernel jobs unique id for tracing
- pre-populate exported buffers
- cyan skillfish updates
- make vbios build number available in sysfs
- userq updates
- HDCP updates
- support MMIO remap page as ttm pool
- JPEG parser updates
- DCE6 DC updates
- use devm for i2c buses
- GPUVM locking updates
- Drop non-DC DCE11 code
- improve fallback handling for pixel encoding
amdkfd:
- SVM/page migration fixes
- debugfs fixes
- add CRIO support for gem objects
- SVM updates
radeon:
- use dev_warn_once in CS parsers
xe:
- add madvise interface
- add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
and memory attributes
- drop L# bank mask reporting from media GT3 on Xe3+.
- add SLPC power_profile sysfs interface
- add configs attribs to add post/mid context-switch commands
- handle firmware reported hardware errors notifying userspace with
device wedged uevent
- use same dir structure across sysfs/debugfs
- cleanup and future proof vram region init
- add G-states and PCI link states to debugfs
- Add SRIOV support for CCS surfaces on Xe2+
- Enable SRIOV PF mode by default on supported platforms
- move flush to common code
- extended core workarounds for Xe2/3
- use DRM scheduler for delayed GT TLB invalidations
- configs improvements and allow VF device enablement
- prep work to expose mmio regions to userspace
- VF migration support added
- prepare GPU SVM for THP migration
- start fixing XE_PAGE_SIZE vs PAGE_SIZE
- add PSMI support for hw validation
- resize VF bars to max possible size according to number of VFs
- Ensure GT is in C0 during resume
- pre-populate exported buffers
- replace xe_hmm with gpusvm
- add more SVM GT stats to debugfs
- improve fake pci and WA kunnit handle for new platform testing
- Test GuC to GuC comms to add debugging
- use attribute groups to simplify sysfs registration
- add Late Binding firmware code to interact with MEI
i915:
- apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
- protect against overflow in active_engine()
- Use try_cmpxchg64() in __active_lookup()
- include GuC registers in error state
- get rid of dev->struct_mutex
- iopoll: generalize read_poll_timout
- lots more display refactoring
- Reject HBR3 in any eDP Panel
- Prune modes for YUV420
- Display Wa fix, additions, and updates
- DP: Fix 2.7 Gbps link training on g4x
- DP: Adjust the idle pattern handling
- DP: Shuffle the link training code a bit
- Don't set/read the DSI C clock divider on GLK
- Enable_psr kernel parameter changes
- Type-C enabled/disconnected dp-alt sink
- Wildcat Lake enabling
- DP HDR updates
- DRAM detection
- wait PSR idle on dsb commit
- Remove FBC modulo 4 restriction for ADL-P+
- panic: refactor framebuffer allocation
habanalabs:
- debug/visibility improvements
- vmalloc-backed coherent mmap support
- HLDIO infrastructure
nova-core:
- various register!() macro improvements
- minor vbios/firmware fixes/refactoring
- advance firmware boot stages; process Booter and patch signatures
- process GSP and GSP bootloader
- Add r570.144 firmware bindings and update to it
- Move GSP boot code to own module
- Use new pin-init features to store driver's private data in a
single allocation
- Update ARef import from sync::aref
nova-drm:
- Update ARef import from sync::aref
tyr:
- initial driver skeleton for a rust driver for ARM Mali GPUs
- capable of powering up, query metadata and provide it to userspace.
msm:
- GPU and Core:
- in DT bindings describe clocks per GPU type
- GMU bandwidth voting for x1-85
- a623/a663 speedbins
- cleanup some remaining no-iommu leftovers after VM_BIND conversion
- fix GEM obj 32b size truncation
- add missing VM_BIND param validation
- IFPC for x1-85 and a750
- register xml and gen_header.py sync from mesa
- Display:
- add missing bindings for display on SC8180X
- added DisplayPort MST bindings
- conversion from round_rate() to determine_rate()
amdxdna:
- add IOCTL_AMDXDNA_GET_ARRAY
- support user space allocated buffers
- streamline PM interfaces
- Refactoring wrt. hardware contexts
- improve error reporting
nouveau:
- use GSP firmware by default
- improve error reporting
- Pre-populate exported buffers
ast:
- Clean up detection of DRAM config
exynos:
- add DSIM bridge driver support for Exynos7870
- Document Exynos7870 DSIM compatible in dt-binding
panthor:
- Print task/pid on errors
- Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
- Improve cache flushing
- Fail VM bind if BO has offset
renesas:
- convert to RUNTIME_PM_OPS
rcar-du:
- Make number of lanes configurable
- Use RUNTIME_PM_OPS
- Add support for DSI commands
rocket:
- Add driver for Rockchip NPU plus DT bindings
- Use kfree() and sizeof() correctly
- Test DMA status
rockchip:
- dsi2: Add support for RK3576 plus DT bindings
- Add support for RK3588 DPTX output
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
pixpaper:
- Add support for Mayqueen Pixpaper plus DT bindings
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
stm:
- Clean up logging
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
tidss:
- Convert to kernel's FIELD_ macros
vesadrm:
- Support 8-bit palette mode
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
v3d:
- Improve job management and locking
vkms:
- Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
- Spport YUV with 16-bit components"
* tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits)
drm/amd: Add name to modes from amdgpu_connector_add_common_modes()
drm/amd: Drop some common modes from amdgpu_connector_add_common_modes()
drm/amdgpu: update MODULE_PARM_DESC for freesync_video
drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes()
drm/amd/display: Share dce100_validate_global with DCE6-8
drm/amd/display: Share dce100_validate_bandwidth with DCE6-8
drm/amdgpu: Fix fence signaling race condition in userqueue
amd/amdkfd: enhance kfd process check in switch partition
amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
drm/amd/display: Reject modes with too high pixel clock on DCE6-10
drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes()
drm/amd/display: Only enable common modes for eDP and LVDS
drm/amdgpu: remove the redeclaration of variable i
drm/amdgpu/userq: assign an error code for invalid userq va
drm/amdgpu: revert "rework reserved VMID handling" v2
drm/amdgpu: remove leftover from enforcing isolation by VMID
drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails
accel/habanalabs: add Infineon version check
accel/habanalabs/gaudi2: read preboot status after recovering from dirty state
accel/habanalabs: add HL_GET_P_STATE passthrough type
...
|
||
|
Linus Torvalds
|
05a54fa773 |
Merge tag 'sound-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's been relatively calm in this cycle from the feature POV, but
there were lots of cleanup works in the wide-range of code for
converting with the auto-cleanup macros like guard().
The mostly user-visible changes are the support of a couple of new
compress-offload API extensions, and the support of new ASoC codec /
platform drivers as well as USB-audio quirks.
Here we go with some highlights:
Core:
- Compress-offload API extension for 64bit timestamp support
- Compress-offload API extension for OPUS codec support
- Workaround for PCM locking issue with PREEMPT_RT and softirq
- KCSAN warning fix for ALSA sequencer core
ASoC:
- Continued cleanup works for ASoC core APIs
- Lots of cleanups and conversions of DT bindings
- Substantial maintainance work on the Intel AVS drivers
- Support for Qualcomm Glymur and PM4125, Realtek RT1321, Shanghai
FourSemi FS2104/5S, Texas Instruments PCM1754 and TAS2783A
- Remove support for TI WL1273 for old Nokia systems
USB-audio:
- Support for Tascam US-144mkII, Presonus S1824c support
- More flexible quirk option handling
- Fix for USB MIDI timer bug triggered by fuzzer
Others:
- A large series of cleanups with guard() & co macros over (non-ASoC)
sound drivers (PCI, ISA, HD-audio, USB-audio, drivers, etc)
- TAS5825 HD-audio side-codec support"
* tag 'sound-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (454 commits)
ALSA: usb-audio: don't hardcode gain for output channel of Presonus Studio
ALSA: usb-audio: add the initial mix for Presonus Studio 1824c
ALSA: doc: improved docs about quirk_flags in snd-usb-audio
ALSA: usb-audio: make param quirk_flags change-able in runtime
ALSA: usb-audio: improve module param quirk_flags
ALSA: usb-audio: add two-way convert between name and bit for QUIRK_FLAG_*
ALSA: usb-audio: fix race condition to UAF in snd_usbmidi_free
ALSA: usb-audio: add mono main switch to Presonus S1824c
ALSA: compress: document 'chan_map' member in snd_dec_opus
ASoC: cs35l56: Add support for CS35L56 B2 silicon
ASoC: cs35l56: Set fw_regs table after getting REVID
ALSA: hda/realtek: Add quirk for HP Spectre 14t-ea100
ASoc: tas2783A: Fix an error code in probe()
ASoC: tlv320aic3x: Fix class-D initialization for tlv320aic3007
ASoC: qcom: sc8280xp: use sa8775p/ subdir for QCS9100 / QCS9075
ASoC: stm32: sai: manage context in set_sysclk callback
ASoC: renesas: msiof: ignore 1st FSERR
ASoC: renesas: msiof: Add note for The possibility of R/L opposite Capture
ASoC: renesas: msiof: setup both (Playback/Capture) in the same time
ASoC: renesas: msiof: tidyup DMAC stop timing
...
|
||
|
Linus Torvalds
|
38057e3236 |
Merge tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann: "Lots of platform specific updates for Qualcomm SoCs, including a new TEE subsystem driver for the Qualcomm QTEE firmware interface. Added support for the Apple A11 SoC in drivers that are shared with the M1/M2 series, among more updates for those. Smaller platform specific driver updates for Renesas, ASpeed, Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale SoCs. Driver updates in the cache controller, memory controller and reset controller subsystems. SCMI firmware updates to add more features and improve robustness. This includes support for having multiple SCMI providers in a single system. TEE subsystem support for protected DMA-bufs, allowing hardware to access memory areas that managed by the kernel but remain inaccessible from the CPU in EL1/EL0" * tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits) soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu() soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver soc: fsl: qe: Change GPIO driver to a proper platform driver tee: fix register_shm_helper() pmdomain: apple: Add "apple,t8103-pmgr-pwrstate" dt-bindings: spmi: Add Apple A11 and T2 compatible serial: qcom-geni: Load UART qup Firmware from linux side spi: geni-qcom: Load spi qup Firmware from linux side i2c: qcom-geni: Load i2c qup Firmware from linux side soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem soc: qcom: geni-se: Cleanup register defines and update copyright dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus Documentation: tee: Add Qualcomm TEE driver tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl tee: qcom: add primordial object tee: add Qualcomm TEE driver tee: increase TEE_MAX_ARG_SIZE to 4096 tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF tee: add close_context to TEE driver operation ... |
||
|
Linus Torvalds
|
0f048c878e |
Merge tag 'soc-dt-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC dt updates from Arnd Bergmann:
"There are five sets of new SoCs that get added in existing families,
all of them being either upgrades or cut-down versions of the older
chips:
- Apple M2 Pro, M2 Max and M2 Ultra, used in the 2022/2023 generation
of high-end workstations and laptops from Apple. Linux has been
working on these for a while but stil requires patches.
- Axis Artpec8 is an Armv8 chip based on Samsung Exynos design,
unlike the earlier Armv7 Artpec6 from the same company that was
part of a separate family of chips.
- NXP i.MX91 is a cut-down version of i.MX93, using only a single
Cortex-A55 core.
- Qualcomm Lemans Auto is a variant of the Lemans SoC that was
originally merged under the sa8775p name, the differences being
mostly the firmware configuration of the platform.
- Four new Renesas SoCs RZ/T2H (r9a09g077m44), RZ/N2H (r9a09g087m44),
RZ/T2H (r9a09g077), and RZ/N2H (r9a09g087) are all industrial
bedded SoCs based on Cortex-A55 cores
In total, there are 65 new machines, including:
- Industrial embedded system and single-board computers based on NXP,
Allwinner, TI, Rockchips, Marvell, Xilinx Spacemit, Starfive chips.
- Reference boards for the newly added Renesas, Qualcomm, NXP and
Axis ARMv8 chips as well as Microchip's MPFS RISC-V SoC
- Laptops and Workstations using Apple M2 and Qualcomm Snapdragon X1
chips.
- Several Samsung phones using Qualcomm Snapdragon chips
- Set-top boxes based on Allwinner H313
- Five BMC boards using 32-bit ASpeed SoCs
- Three network routers using IXP4xx (ARMv5!) and Broadcom bcm4708
(ARMv7) SoCs
Two machines get phased out because they were available only in small
quantities but never made it into products: one STi407 based reference
board, and a Snapdragon 845 based Chromebook.
Aside from the newly added machines, a lot of work went into improving
hardware support on the existing machines and cleaning up contents for
validation"
* tag 'soc-dt-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (931 commits)
arm64: dts: apm-shadowcat: Drop "apm,xgene2-pcie" compatible
arm64: dts: apm-shadowcat: Move slimpro nodes out of "simple-bus" node
ARM: dts: microchip: sam9x7: Add qspi controller
arm64: dts: qcom: Add MST pixel streams for displayport
arm64: dts: qcom: sm6350: correct DP compatibility strings
arm64: dts: qcom: monaco-evk: Enable Adreno 623 GPU
arm64: dts: qcom: qcs8300-ride: Enable Adreno 623 GPU
arm64: dts: qcom: qcs8300: Add gpu and gmu nodes
arm64: dts: allwinner: h313: Add Amediatech X96Q
dt-bindings: arm: sunxi: Add Amediatech X96Q
arm64: dts: apple: t8015: Add SPMI node
arm64: dts: apple: t8012: Add SPMI node
arm64: dts: apple: Add J180d (Mac Pro, M2 Ultra, 2023) device tree
arm64: dts: rockchip: Add devicetree for the ROC-RK3588-RT
dt-bindings: arm: rockchip: Add Firefly ROC-RK3588-RT
arm64: dts: rockchip: update pinctrl names for Radxa E52C
arm64: dts: rockchip: remove vcc_3v3_pmu regulator for Radxa E52C
arm64: dts: apple: Add J474s, J475c and J475d device trees
arm64: dts: apple: Add J414 and J416 Macbook Pro device trees
arm64: dts: apple: Add initial t6020/t6021/t6022 DTs
...
|