VFs on some IP versions are unable to access this register directly.
This register must be programmed before PSP ring is setup,
so use PSP VF mailbox directly. PSP will broadcast the register
value to all VF assigned instances.
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed-by: Zhigang Luo <Zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function atomctrl_initialize_mc_reg_table() and
atomctrl_initialize_mc_reg_table_v2_2() does not check the return
value of smu_atom_get_data_table(). If smu_atom_get_data_table()
fails to retrieve vram_info, it returns NULL which is later
dereferenced.
Fixes: b3892e2bb5 ("drm/amd/pp: Use atombios api directly in powerplay (v2)")
Fixes: 5f92b48cf6 ("drm/amd/pm: add mc register table initialization")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement the kernel graphics queue pipe reset,and the driver
will fallback to pipe reset when the queue reset fails. However,
the ME FW hasn't fully supported pipe reset yet so disable the
KGQ pipe reset temporarily.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
DCN401 uses a different structure to store the VStartup offset used to
calculate the VUpdate position, so adjust the calculations to use this
value.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In the mode validation, mst dsc is considered for bw calculation after
common dsc config is determined. Currently it considered common dsc config
is found if max and min target bpp are non zero which is not accurate. Invalid
max and min target bpp values would not get max_kbps and min_kbps calculated,
leading to falsefully pass a mode that does not have valid dsc parameters
available.
[how]
Use the return value of decide_dsc_bandwidth_range() to determine whether valid
dsc common config is found or not. Prune out modes that do not have valid common
dsc config determined.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DCN4+ supports a new register based mailbox for sending messages
from host to DMCUB. This mailbox supports 64 byte commands, which makes
it compatible with the same structure as the frame buffer based mailbox.
[HOW]
The intention for reg_inbox0 is to be slot in replacement for the frame
buffer based mailbox (Inbox1). It supports all of the required features:
- Supports all messages handled by FB Inbox1
- Supports multi command batching
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Replay need special policy for the scenario Teams,
add a flag to imply apply special policy or not.
[How]
Add a config option intended for future use for video conferencing applications.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: ChunTao Tso <ChunTao.Tso@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This array was initially defined as size 50. There were array overflow
issues so the size was increased to 100. To ensure such issues are
avoided in the future, the size should be set based on the possible
contents instead of an arbitrary value.
[How]
- upper bound, assume every update occurs on max number of pipes
- define array sizes for function parameters, for static analysis
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Mapping of ODM enum is different for DML2.0 vs DML2.1.
Configs using DML2.1 will incorrectly trigger an assert meant for DML2.0.
[How]
Use if/else to seperate logic between DML2.0 and DML2.1.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use gpu_metrics_v1_8 for smu_v13_0_6 to fill metrics data
v2: Move exposing caps to separate patch, move smu_v13.0.12 gpu metrics
1.8 usage to separate patch (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MES is an important firmware that lacks some essential documentation.
This commit introduces an overview of it and how it works.
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GC is a large block that plays a vital role for amdgpu; for this reason,
this commit creates one specific page for GC and adds extra information
about the CP component.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The APU and dGPU tables are hidden in the driver misc info, which makes
it hard to find specific hardware info when users need it. This commit
creates a single page for this information and adds it to the top of the
amdgpu list to improve searchability.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since driver-core has an overview of the AMD GPU hardware structure, it
makes more sense to keep it first. This commit move driver-core up in
the index list.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit introduces some new acronyms extracted from the source code
and found on some web pages around the internet (most of them came from
ArchLinux, Gentoo, and Wikipedia links).
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We shouldn't return after the last section.
We need to update the rest of the CSIB.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We shouldn't return after the last section.
We need to update the rest of the CSIB.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We shouldn't return after the last section.
We need to update the rest of the CSIB.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We shouldn't return after the last section.
We need to update the rest of the CSIB.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We shouldn't return after the last section.
We need to update the rest of the CSIB.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We shouldn't return after the last section.
We need to update the rest of the CSIB.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set the actual number of queues per pipe for ME0 (gfx).
This way we will dump all of the queues properly in
dev core dumps.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The driver currently sets up one kgq per pipe. As such
adev->gfx.me.num_queue_per_pipe is hardcoded to 1 everywhere.
This is fine for kernel queues, but when we enable user queues
we need to know that actual number of queues per pipe. Decouple
the kgq setup from the actual hardware count. For dev core
dumps and user queues, we want to know the actual number
of queues per pipe.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable the cleaner shader for other GFX10.3.x series of GPUs to provide
data isolation between GPU workloads. The cleaner shader is responsible
for clearing the Local Data Store (LDS), Vector General Purpose
Registers (VGPRs), and Scalar General Purpose Registers (SGPRs), which
helps prevent data leakage and ensures accurate computation results.
This update extends cleaner shader support to GFX10.3.x GPUs, previously
available for GFX10.3.0. It enhances security by clearing GPU memory
between processes and maintains a consistent GPU state across KGD and
KFD workloads.
Cc: Mario Sopena-Novales <mario.novales@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop the cgs smu firmware code for SI, it's not used.
The smu firmware fetching for SI is done in si_dpm.c.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
