Add a scope-based helpers for runtime PM that may be used to simplify
cleanup logic and potentially avoid goto-based cleanup.
For example, using
guard(xe_pm_runtime)(xe);
will get runtime PM and cause a corresponding put to occur automatically
when the current scope is exited. 'xe_pm_runtime_noresume' can be used
as a guard replacement for the corresponding 'noresume' variant.
There's also an xe_pm_runtime_ioctl conditional guard that can be used
as a replacement for xe_runtime_ioctl():
ACQUIRE(xe_pm_runtime_ioctl, pm)(xe);
if ((ret = ACQUIRE_ERR(xe_pm_runtime_ioctl, &pm)) < 0)
/* failed */
In a few rare cases (such as gt_reset_worker()) we need to ensure that
runtime PM is dropped when the function is exited by any means
(including error paths), but the function does not need to acquire
runtime PM because that has already been done earlier by a different
function. For these special cases, an 'xe_pm_runtime_release_only'
guard can be used to handle the release without doing an acquisition.
These guards will be used in future patches to eliminate some of our
goto-based cleanup.
v2:
- Specify success condition for xe_pm runtime_ioctl as _RET >= 0 so
that positive values will be properly identified as success and
trigger destructor cleanup properly.
v3:
- Add comments to the kerneldoc for the existing 'get' functions
indicating that scope-based handling should be preferred where
possible. (Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251118164338.3572146-31-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Since forcewake uses a reference counting get/put model, there are many
places where we need to be careful to drop the forcewake reference when
bailing out of a function early on an error path. Add scope-based
cleanup options that can be used in place of explicit get/put to help
prevent mistakes in this area.
Examples:
CLASS(xe_force_wake, fw_ref)(gt_to_fw(gt), XE_FW_GT);
Obtain forcewake on the XE_FW_GT domain and hold it until the
end of the current block. The wakeref will be dropped
automatically when the current scope is exited by any means
(return, break, reaching the end of the block, etc.).
xe_with_force_wake(fw_ref, gt_to_fw(ss->gt), XE_FORCEWAKE_ALL) {
...
}
Hold all forcewake domains for the following block. As with the
CLASS usage, forcewake will be dropped automatically when the
block is exited by any means.
Use of these cleanup helpers should allow us to remove some ugly
goto-based error handling and help avoid mistakes in functions with lots
of early error exits.
An 'xe_force_wake_release_only' class is also added for cases where a
forcewake reference is passed in from another function and the current
function is responsible for releasing it in every flow and error path.
v2:
- Create a separate constructor that just wraps xe_force_wake_get for
use in the class. This eliminates the need to update the signature
of xe_force_wake_get(). (Michal)
v3:
- Wrap xe_with_force_wake's 'done' marker in __UNIQUE_ID. (Gustavo)
- Add a note to xe_force_wake_get()'s kerneldoc explaining that
scope-based cleanup is preferred when possible. (Gustavo)
- Add an xe_force_wake_release_only class. (Gustavo)
v4:
- Add NULL check on fw in release_only variant. (Gustavo)
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251118164338.3572146-30-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Add an irq parent driver interface for the .enabled and .synchronize
calls. This lets us drop the dependency on i915_drv.h and i915_irq.h in
multiple places, and subsequently remove the compat i915_irq.h and
i915_irq.c files along with the display/ext directory from xe
altogether.
Introduce new intel_parent.[ch] as the wrapper layer to chase the
function pointers and convert between generic and more specific display
types.
v2: Keep static wrappers in intel_display_irq.c (Ville)
v3: Full blown wrappers in intel_parent.[ch] (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/dd62dd52ef10d9ecf77da3bdf6a70f71193d141c.1763370931.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Duplicate gen2_irq_reset(), gen2_assert_iir_is_zero(), gen2_irq_init(),
gen2_error_reset(), and gen2_error_init() in intel_display_irq.c.
This allows us to drop the duplicates from xe, and prepares for future
cleanups. Although duplication is undesirable in general, in this case
the local duplicates lead to a cleaner end result.
There's a slight wrinkle in gen2_assert_iir_is_zero(). We need to use
non-device based logging until we pass in struct intel_display in a
separate change.
v2:
- Keep xe compat stuff due to series reorder and rebase
- Keep the WARN as regular WARN
- Rename the functions in the same go
Suggested-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/296d74731cce57ab7534c57969d3146294adda57.1763370931.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Unfortunately the MAD_DIMM DIMM_S and DIMM_L bits on ICL are
not idential, so we are currently decoding DIMM_S incorrectly.
Fix the problem by defining the DIMM_S and DIMM_L bits separately.
And for consistency do that same for SKL, even though there the
bits do match between the two DIMMs. The result is rather
repetitive in places, but I didn't feel like obfuscatign things
with cpp macros/etc.
Broken decoding on Dell XPS 13 7390 2-in-1:
CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no
CH0 DIMM S size: 32 Gb, width: X32, ranks: 3, 16Gb+ DIMMs: no
CH0 ranks: 2, 16Gb+ DIMMs: no
CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no
CH1 DIMM S size: 32 Gb, width: X32, ranks: 3, 16Gb+ DIMMs: no
CH1 ranks: 2, 16Gb+ DIMMs: no
Memory configuration is symmetric? no
Fixed decoding on Dell XPS 13 7390 2-in-1:
CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no
CH0 DIMM S size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no
CH0 ranks: 2, 16Gb+ DIMMs: no
CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no
CH1 DIMM S size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no
CH1 ranks: 2, 16Gb+ DIMMs: no
Memory configuration is symmetric? yes
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251029204215.12292-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The ronbo-rb070d30 controles the various gpios for reset, standby,
vertical and horizontal flip using the non-sleeping gpiod_set_value()
function.
Switch to using gpiod_set_value_cansleep() when controlling reset_gpio to
support GPIO providers that may sleep, such as I2C GPIO expanders.
This fixes noisy complaints in kernel log for gpio providers that do
sleep.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251117-imx8mp-hb-iiot-v3-5-bf1a4cf5fa8e@solid-run.com
The LD070WX3 is a Color Active Matrix Liquid Crystal Display with an
integral Light Emitting Diode (LED) backlight system. The matrix employs
a-Si Thin Film Transistor as the active element. It is a transmissive type
display operating in the normally Black mode. This TFT-LCD has 7.0 inches
diagonally measured active display area with WXGA resolution (800 by 1280
pixel array).
LG LD070WX3-SL01 MIPI DSI panel was treated as simple DSI panel when it is
actually not and requires proper setup for correct work. Simple panel work
relied on preliminary configuration done by bootloader.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251110091440.5251-3-clamor95@gmail.com
ops_execute() calculates the size of a fence array based on
XE_MAX_GT_PER_TILE, while the code that actually fills in the fence
array uses a for_each_tlb_inval() iterator. This works out okay today
since both approaches come up with the same number of invalidation
fences (2: primary GT invalidation + media GT invalidation), but could
be problematic in the future if there isn't a 1:1 relationship between
TLBs needing invalidation and potential GTs on the tile.
Adjust the allocation code to use the same for_each_tlb_inval()
counting logic as the code that fills the array to future-proof the
code.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251118202604.3715782-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
MTL+ platforms are supported by dpll framework remove a separate
check for hw comparison and rely solely on dpll framework
hw comparison.
Finally, all required hooks are now in place so initialize
PLL manager for MTL+ platforms and remove the redirections
to the legacy code paths from the following interfaces:
* intel_encoder::clock_enable/disable()
* intel_encoder::get_config()
* intel_dpll_funcs::get_hw_state()
* intel_ddi_update_active_dpll()
* pipe_config_pll_mismatch()
v2: Rebase on !HAS_LT_PHY check in intel_ddi_update_active_dpll()
v3: Rebase on !display->dpll.mgr check in intel_ddi_update_active_dpll()
Add check for NVL as the platform is not part of pll framework (Suraj)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251118132859.2584452-1-mika.kahola@intel.com
Add the PLL hooks for the TBT PLL on MTL+. These are simple stubs
similarly to the TBT PLL on earlier platforms, since this PLL is always
on from the display POV - so no PLL enable/disable programming is
required as opposed to the non-TBT PLLs - and the clocks for different
link rates are enabled/disabled at a different level, via the
intel_encoder::enable_clock()/disable_clock() interface.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-32-mika.kahola@intel.com
