During the KFD/KCQ coordination rework, bad queues not requiring reset
were combined into the rework and generated wrong reset signals to the
process. Fix it by adding the reset check.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UTS_RELEASE evaluates to a static string and changes quite easily (e.g.
uncommitted changes in the source tree or new commits). So when checking
if a patch introduces changes to the resulting binary each usage of
UTS_RELEASE is source of annoyance.
Instead of using UTS_RELEASE directly use init_utsname()->release which
evaluates to the same string but with that a change of UTS_RELEASE
doesn't affect amdgpu_dev_coredump.o.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260428144704.1114562-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The cleaner shader sysfs path allocates a 16-dword (64 byte) IB but
incorrectly fills (align_mask + 1) dwords. On GFX rings align_mask is
0xff, so the loop wrote 256 dwords into a 64-byte buffer, causing a
kernel page fault.
The IB only needs to be a minimal NOP shell to schedule the job; the
cleaner shader itself is emitted on the ring via emit_cleaner_shader().
Fill 16 dwords to match the allocation.
v2: Use ib_size_dw variable (Lijo)
Fixes: d361ad5d2f ("drm/amdgpu: Add sysfs interface for running cleaner shader")
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace the stack-allocated amdgpu_lockdep mutex with a heap allocation
via kmalloc to fix a stack overflow caused by the large struct size.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace the four open-coded REG_WAIT calls with calls to
dcn31_wait_for_det_apply() so the compressed buffer (compbuf) sizing
path waits long enough for the DET size update to take effect, and the
wait timing stays consistent across the driver.
No functional change beyond the corrected timeout.
Signed-off-by: Antonio Quartulli <antonio@mandelbit.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SMI events were reporting incorrect PIDs in containerized environments,
causing test failures where container processes expected to see their
namespace-local PIDs but instead received global host PIDs.
The issue had two root causes:
1. Event functions were called from kernel context (page fault handlers,
migration workers) where 'current' refers to the kernel worker thread,
not the userspace GPU process that triggered the event.
2. PID conversion used task_tgid_vnr() which returns the PID in the
caller's namespace (init namespace for kernel threads), not the task's
own namespace.
This patch updates the SMI event interface:
- Change 8 event function signatures to accept task_struct pointer
instead of pid_t, allowing proper namespace-aware PID conversion
- Convert PIDs using task_tgid_nr_ns(task, task_active_pid_ns(task))
which returns the PID as the process sees it via getpid()
- Update 10 call sites to pass p->lead_thread (the GPU process)
instead of p->lead_thread->pid or current (kernel worker)
This ensures SMI events report container-local PIDs, which is critical
for containerized GPU workloads to correctly correlate events with their
processes.
Tested-by: Andrew Martin <andmarti@amd.com>
Assisted-by: Claude:Sonnet 4-5
Signed-off-by: Andrew Martin <andrew.martin@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_gfx_reset_mes_compute() runs amdgpu_mes_suspend(adev, 0) to
quiesce all gangs, resets the offending queue(s), then resumes. The
existing amdgpu_gfx_mes_reset_queue() called amdgpu_ring_reset_helper_end()
right after unmap/restore/map of the reset queue, which re-emits backed-up
commands and rings the doorbell. That doorbell hits a still-suspended CP:
on the subsequent resume the queue partially wedges -- the first new IB
after the reset may execute but later submissions stall, which surfaces
as repeated timeouts on the same ring under concurrent workloads.
Split out amdgpu_gfx_mes_reset_queue_start() (backup + MES reset +
unmap/restore/map only) and defer helper_end. amdgpu_gfx_reset_mes_compute()
collects the (ring, fence) pair for every queue it resets and runs
helper_end on each after amdgpu_mes_resume(), so the re-emit doorbells
land on a running CP. amdgpu_gfx_reset_mes_kcq() now reports the matched
ring/fence back to the caller for the same reason.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Periodic detection callbacks from DCN35 was removed for higher IPS
residency causing some displays to fail to recover after DPMS sleep. The
monitors bounces HPD ~1.2s after link training, and without periodic
detection the system enters IPS with no mechanism to wake and rediscover
the display.
Restore the periodic detection calls in dcn35_clk_mgr for now. It should
be replaced with a proper IPS-aware solution long term using DMUB.
Also remove it from dcn31 and dcn314_clk_mgr.c since they do not have IPS,
thus should not affect them.
Fixes: 3f6c060846 ("drm/amd/display: Remove periodic detection callbacks from dcn35+")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5318
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Extract hdcp_get_content_protection_from_status() and
hdcp_get_link_display_adjustments() from event_property_update()
and hdcp_update_display() so the pure decision logic can be
KUnit-tested.
Also update function comments to kernel-doc formats.
Assisted-by: Copilot:Claude-Opus-4.6
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Extract three pure predicate functions from amdgpu_dm_crtc_set_crc_source():
- dm_need_dp_aux
- dm_crc_source_should_start_dprx
- dm_crc_source_should_stop_dprx
Refactor set_crc_source() to use these helpers, replacing the nested
if/else if structure with flat, mutually-exclusive branches driven by
the new predicates.
Add KUnit test cases covering all relevant source combinations for each
helper, including the regression case where DPRX→NONE must trigger
drm_dp_stop_crc().
Assisted-by: Copilot:Claude-Sonnet-4.6
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Fix three issues amdgpu_dm_crc.c:
- Use cur_crc_src instead of source when deciding whether to call
drm_dp_stop_crc() in the disable path of set_crc_source(). When
disabling CRC, source is always NONE so dm_is_crc_source_dprx(source)
was always false, meaning drm_dp_stop_crc() was never called when
stopping a DPRX CRC source. Use cur_crc_src to check what was
previously active instead.
- Replace fragile 'source < 0' comparisons in verify_crc_source() and
set_crc_source() with AMDGPU_DM_PIPE_CRC_SOURCE_INVALID.
and avoiding signed/unsigned enum comparison concerns.
- Remove redundant NULL initializations for drm_dev and acrtc in
handle_crc_irq(). Both variables are unconditionally assigned right
after.
Assisted-by: Copilot:Claude-Sonnet-4.6
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit test coverage for needs_dsc_aux_workaround() in
amdgpu_dm_mst_types.c. Tests verify the function correctly
identifies links requiring the DSC AUX workaround based on
branch device ID, DPCD revision, and sink count.
Assisted-by: Copilot:Claude-Opus-4.6
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Remove unreachable null check on aconnector after container_of,
and redundant dc_sink checks where dc_sink is guaranteed non-NULL
after earlier null-check with early return.
Assisted-by: Copilot:Claude-Opus-4.6
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add CONFIG_WERROR=y to .kunitconfig to treat compiler warnings
as errors during KUnit builds, ensuring warnings are caught
early.
Assisted-by: Copilot:Claude-Opus-4.6
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
In amdgpu_dm_link_setup_replay(), nom_coasting_vtotal was
used only once immediately after in set_replay_coasting_vtotal().
Inline the value directly to remove the no-op alias.
In amdgpu_dm_set_replay_caps(), replace link->ctx->dc->debug
with dc->debug since dc is already assigned as link->ctx->dc,
eliminating a redundant pointer round-trip.
Assisted-by: Copilot:Claude-Sonnet-4.6
Reviewed-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
1. Use ARRAY_SIZE() instead of manual sizeof division for the
format array iteration. Add a break statement to exit the loop
early once a matching format is found.
2. Remove redundant zero initialization of res since all paths
assign before use.
Assisted-by: Copilot:Claude-Opus-4.6
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
There is an issue that is seemingly limited to DCN42 where systems with
IOMMU enabled will hang during reboot stress testing. The hang happens shortly
after DCN PG exit happens and HUBP is programmed for the first flip, but before
the first surface address is latched. Testing has shown that disabling
DCCG_GLOBAL_FGCG_REP_DIS, HUBP_FGCG_REP_DIS, and DCFCLK_GATE_DIS can mask this
issue.
Disable FGCG for these three repeater bits to avoid issue while debug is on-going.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The DMUB register offload feature should no longer be used.
This was originally a debug feature for DCN21.
No longer applicable to the DMUB programming model.
[How]
Remove DMUB register offload infrastructure including helper
functions, structures, debug options, and register sequence macros.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some 8K displays cannot tolerate the reduced phy ssc value
at high link utilization and show corruption or black screen.
[How]
Add an EDID panel-id quirk to utilize existing skip_phy_ssc_reduction flag.
To pass the link into the quirk handler, change the signature of
apply_edid_quirks() to take link as an argument. The dev local in
dm_helpers_parse_edid_caps() becomes unused and is removed.
Fixes: 5fa62c87cf ("drm/amd/display: Add option to disable PHY SSC reduction on transmitter enable")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The GPU reload test (S3 / mode1 reset / module reload) triggers a
WARN_ON in amdgpu_irq_put() on gfx10 when unloading amdgpu:
WARNING: CPU: 0 PID: 2314 at amd/amdgpu/amdgpu_irq.c:676 amdgpu_irq_put+0xc3/0xe0 [amdgpu]
Call Trace:
gfx_v10_0_hw_fini+0x41/0x150 [amdgpu]
amdgpu_ip_block_hw_fini+0x29/0xc0 [amdgpu]
amdgpu_device_fini_hw+0x315/0x610 [amdgpu]
amdgpu_driver_unload_kms+0x7c/0x90 [amdgpu]
amdgpu_pci_remove+0x51/0x90 [amdgpu]
amdgpu_device_ip_resume_phase2() skips IP blocks whose status.hw is
already set, but amdgpu_device_ip_suspend_phase2() never had the
matching guard, so a block can be suspended twice (e.g. a reset or
recovery issued while the device is already suspended). The second
suspend runs hw_fini again, which now releases the gfx fault IRQs
unconditionally, dropping a refcount that is already zero and tripping
the WARN_ON in amdgpu_irq_put().
The fault/EOP IRQ get/put were balanced through late_init/hw_fini
before, which masked the double-suspend; moving the get into hw_init
made the suspend/resume asymmetry visible as an IRQ refcount underflow.
Honor status.hw in ip_suspend_phase2() so suspend mirrors resume and a
block is only torn down once.
Fixes: 9117d8be85 ("drm/amdgpu/gfx: move fault and EOP IRQ get/put to hw_init/hw_fini")
Fixes: 482f0e5385 ("drm/amdgpu: fix double ucode load by PSP(v3)")
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When kfd_queue_acquire_buffers() was split off from
set_queue_properties_from_user(), set_queue_properties_from_criu()
was missed. Thus, set_queue_properties_from_criu() is not
filling out the buffer fields of queue_properties, which
can come up when subsequent code expects them to be non-null.
Add the proper call to kfd_queue_acquire_buffers(), and also
use the right cast types in set_queue_properties_from_criu()
(which were missed at the same time)
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During smu_v15_0_0_system_features_control(), the driver sends a
PrepareMp1ForUnload message to PMFW. PMFW then performs nBIF and SYSHUB
function-level resets (FLR), disabling PCIe CFG space reset, which
clears the framebuffer enable bit to zero and disables MC (memory controller)
access from the host.
Re-enable MC access via the nbio mc_access_enable callback right after
PrepareMp1ForUnload completes in smu_v15_0_0_system_features_control().
Signed-off-by: Shubhankar Milind Sardeshpande <Shubhankar.MilindSardeshpande@amd.com>
Signed-off-by: Suresh Guttula <Suresh.Guttula@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set secure_submission_supported = true for the VCN unified ring funcs in
vcn_v4_0_5.c so secure IBs are allowed on the unifiedring.
Without this, protected decode submissions are blocked by the
common IB gate and can fail playback for secure content.
For vcn_v4_0_5.c (fixed STX VCN version), secure submission is
enabled directly in the ring funcs definition.
This change only advertises existing hardware/firmware capability;
non-secure decode paths are unaffected.
Signed-off-by: Jeevana Muthyala <jmuthyal@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set secure_submission_supported = true for the VCN unified ring funcs in
vcn_v4_0.c so secure IBs are allowed on the unified ring.
Without this, protected decode submissions are blocked by the
common IB gate and can fail playback for secure content.
For vcn_v4_0.c, the secure ring funcs are selected for the secure-capable
IP version.
This change only advertises existing hardware/firmware capability;
non-secure decode paths are unaffected.
Signed-off-by: Jeevana Muthyala <jmuthyal@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use usleep_range() instead of mdelay() when ras_fw_get_badpage_count()
retries on -EBUSY so the driver yields the CPU while waiting for PMFW
EEPROM to become ready.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes read /sys/class/drm/cardN/device/devcoredump/data
return empty content sometimes.
amdgpu_devcoredump_format() leaves struct drm_print_iterator's
.start field uninitialized on the stack before passing it to
drm_coredump_printer(). __drm_puts_coredump() compares the running
.offset against .start to decide whether to skip or copy each
chunk:
if (iterator->offset < iterator->start) {
if (iterator->offset + len <= iterator->start) {
iterator->offset += len;
return;
}
...
}
Fixes: 4bbba79a7f ("drm/amdgpu: move devcoredump generation to a worker")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_amdkfd_gpuvm_free_memory_of_gpu() unpinned DOORBELL and MMIO
remap BOs (which are pinned at allocation time) before checking whether
the BO is still mapped to the GPU. When the BO is still mapped, the
function returns -EBUSY and leaves the BO alive, but it has already
been unpinned. The BO is then unpinned again when it is finally freed
during process teardown, triggering a ttm_bo_unpin() underflow warning:
WARNING: CPU: 18 PID: 15066 at ttm/ttm_bo.c:650 amdttm_bo_unpin+0x6d/0x80 [amdttm]
Workqueue: kfd_process_wq kfd_process_wq_release [amdgpu]
RIP: 0010:amdttm_bo_unpin+0x6d/0x80 [amdttm]
Call Trace:
amdgpu_bo_unpin+0x1a/0x90 [amdgpu]
amdgpu_amdkfd_gpuvm_unpin_bo+0x31/0xb0 [amdgpu]
amdgpu_amdkfd_gpuvm_free_memory_of_gpu+0x3bf/0x460 [amdgpu]
kfd_process_free_outstanding_kfd_bos+0xd4/0x170 [amdgpu]
kfd_process_wq_release+0x109/0x1b0 [amdgpu]
process_one_work+0x1e2/0x3b0
worker_thread+0x50/0x3a0
kthread+0xdd/0x100
ret_from_fork+0x29/0x50
Move the unpin after the mapped_to_gpu_memory check so it only happens
once we are committed to freeing the BO.
Fixes: d25e35bc26 ("drm/amdgpu: Pin MMIO/DOORBELL BO's in GTT domain")
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Compute user bad/hung queue recovery was handled by KFD using
suspend_all_queues_mes, remove_queue(or reset_queue), and
resume_all_queues_mes. Since now those steps are centralized to
amdgpu_gfx_reset_mes_compute function to sync up with KCQ and KGD user
queues, clean up redundant code and rename the function to match its
functionality.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Host driver determines the bad_page_status, not VF.
VFs do not have access to the EEPROM, and eeprom_init
is skipped. However, check_bad_page_status is called
outside of the eeprom_init sequence without any is_vf checks.
Add a return false in __is_ras_eeprom_supported for VFs, and use
that guard in amdgpu_ras_check_bad_page_status to prevent
incorrect access to un-initialized eeprom_control object.
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
vega10_odn_edit_dpm_table() and smu7_odn_edit_dpm_table() could mutate
the live ODN table for valid triples, then return 0 after detecting a
truncated buffer or out-of-range index. Validate all (index, clock,
voltage) triples first and return -EINVAL on any failure; only then
apply updates.
v2: Use distinct message for different error case, removed unused
input_level from validation loop (Lijo)
v3: Reject negative level indices, input[] is long but was compared only
against unsigned table bounds, so negative values could pass and truncate
when assigned to uint32_t input_level.
Set DPMTABLE_OD_UPDATE_SCLK/MCLK only after validation passes,
so a failed sysfs write does not leave need_update_dpm_table set for a
later commit.
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add helpers to validate custom profile params against
negative/out-of-range values. Use the helpers to validate user passed
params.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Assisted-by: Claude Sonnet (Cursor AI)
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_regs, amdgpu_regs2, and related debugfs nodes allow
arbitrary MMIO read/write via RREG32/WREG32 without checking
security_locked_down(). On kernel_lockdown=integrity systems
this bypasses the same restrictions as /dev/mem and PCI config
space sysfs.
Check LOCKDOWN_PCI_ACCESS (matching pci-sysfs) at the entry of every
debugfs handler that performs direct register access.
v2: Use consistent check as per previous check to use
LOCKDOWN_DEBUGFS(Lijo)
v3: Do not create any entry from amdgpu_debugfs_regs_init() if
LOCKDOWN_PCI_ACCESS is active and log once. (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
