The CP_SMMU_TABLE_UPDATE _should_ be waiting for idle, but on some
devices (x1-85, possibly others), it seems to pass that barrier while
there are still things in the event completion FIFO waiting to be
written back to memory.
Work around that by adding a fence wait before context switch. The
CP_EVENT_WRITE that writes the fence is the last write from a submit,
so seeing this value hit memory is a reliable indication that it is
safe to proceed with the context switch.
v2: Only emit CP_WAIT_TIMESTAMP on a7xx, as it is not supported on a6xx.
Conversely, I've not been able to reproduce this issue on a6xx, so
hopefully it is limited to a7xx, or perhaps just certain a7xx
devices.
Fixes: af66706acc ("drm/msm/a6xx: Add skeleton A7xx support")
Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/63
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Don't set the merge_3d pending flush bits if the mode_3d is
BLEND_3D_NONE.
Always flushing merge_3d can cause timeout issues when there are
multiple commits with concurrent writeback enabled.
This is because the video phys enc waits for the hw_ctl flush register
to be completely cleared [1] in its wait_for_commit_done(), but the WB
encoder always sets the merge_3d pending flush during each commit
regardless of if the merge_3d is actually active.
This means that the hw_ctl flush register will never be 0 when there are
multiple CWB commits and the video phys enc will hit vblank timeout
errors after the first CWB commit.
[1] commit fe9df3f50c ("drm/msm/dpu: add real wait_for_commit_done()")
Fixes: 3e79527a33 ("drm/msm/dpu: enable merge_3d support on sm8150/sm8250")
Fixes: d7d0e73f7d ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/619092/
Link: https://lore.kernel.org/r/20241009-mode3d-fix-v1-1-c0258354fadc@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
If the allocation in msm_disp_state_dump_regs() failed then
`block->state` can be NULL. The msm_disp_state_print_regs() function
_does_ have code to try to handle it with:
if (*reg)
dump_addr = *reg;
...but since "dump_addr" is initialized to NULL the above is actually
a noop. The code then goes on to dereference `dump_addr`.
Make the function print "Registers not stored" when it sees a NULL to
solve this. Since we're touching the code, fix
msm_disp_state_print_regs() not to pointlessly take a double-pointer
and properly mark the pointer as `const`.
Fixes: 98659487b8 ("drm/msm: add support to take dpu snapshot")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/619657/
Link: https://lore.kernel.org/r/20241014093605.1.Ia1217cecec9ef09eb3c6d125360cc6c8574b0e73@changeid
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Historically CRTC resources (LMs and CTLs) were assigned in
dpu_crtc_atomic_begin(). The commit 9222cdd27e ("drm/msm/dpu: move hw
resource tracking to crtc state") simply moved resources to
struct dpu_crtc_state, without changing the code sequence. Later on the
commit b107603b4a ("drm/msm/dpu: map mixer/ctl hw blocks in encoder
modeset") rearanged the code, but still kept the cstate->num_mixers
assignment to happen during commit phase. This makes dpu_crtc_state
inconsistent between consequent atomic_check() calls.
Move CRTC resource assignment to happen at the end of
dpu_encoder_virt_atomic_check().
Fixes: b107603b4a ("drm/msm/dpu: map mixer/ctl hw blocks in encoder modeset")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/612235/
Link: https://lore.kernel.org/r/20240903-dpu-mode-config-width-v6-2-617e1ecc4b7a@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Some userspace changes are necessary so add a flag for userspace to
advertise support for preemption when creating the submitqueue.
When this flag is not set preemption will not be allowed in the middle
of the submitted IBs therefore mantaining compatibility with older
userspace.
The flag is rejected if preemption is not supported on the target, this
allows userspace to know whether preemption is supported.
Tested-by: Rob Clark <robdclark@gmail.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8450-HDK
Signed-off-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/618028/
Signed-off-by: Rob Clark <robdclark@chromium.org>
This patch implements preemption feature for A6xx targets, this allows
the GPU to switch to a higher priority ringbuffer if one is ready. A6XX
hardware as such supports multiple levels of preemption granularities,
ranging from coarse grained(ringbuffer level) to a more fine grained
such as draw-call level or a bin boundary level preemption. This patch
enables the basic preemption level, with more fine grained preemption
support to follow.
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8450-HDK
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/618021/
Signed-off-by: Rob Clark <robdclark@chromium.org>
The cpu_emergency_register_virt_callback() function is used
unconditionally by the x86 kvm code, but it is declared (and defined)
conditionally:
#if IS_ENABLED(CONFIG_KVM_INTEL) || IS_ENABLED(CONFIG_KVM_AMD)
void cpu_emergency_register_virt_callback(cpu_emergency_virt_cb *callback);
...
leading to a build error when neither KVM_INTEL nor KVM_AMD support is
enabled:
arch/x86/kvm/x86.c: In function ‘kvm_arch_enable_virtualization’:
arch/x86/kvm/x86.c:12517:9: error: implicit declaration of function ‘cpu_emergency_register_virt_callback’ [-Wimplicit-function-declaration]
12517 | cpu_emergency_register_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/x86/kvm/x86.c: In function ‘kvm_arch_disable_virtualization’:
arch/x86/kvm/x86.c:12522:9: error: implicit declaration of function ‘cpu_emergency_unregister_virt_callback’ [-Wimplicit-function-declaration]
12522 | cpu_emergency_unregister_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix the build by defining empty helper functions the same way the old
cpu_emergency_disable_virtualization() function was dealt with for the
same situation.
Maybe we could instead have made the call sites conditional, since the
callers (kvm_arch_{en,dis}able_virtualization()) have an empty weak
fallback. I'll leave that to the kvm people to argue about, this at
least gets the build going for that particular config.
Fixes: 590b09b1d8 ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Kai Huang <kai.huang@intel.com>
Cc: Chao Gao <chao.gao@intel.com>
Cc: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull mailbox updates from Jassi Brar:
- fix kconfig dependencies (mhu-v3, omap2+)
- use devie name instead of genereic imx_mu_chan as interrupt name
(imx)
- enable sa8255p and qcs8300 ipc controllers (qcom)
- Fix timeout during suspend mode (bcm2835)
- convert to use use of_property_match_string (mailbox)
- enable mt8188 (mediatek)
- use devm_clk_get_enabled helpers (spreadtrum)
- fix device-id typo (rockchip)
* tag 'mailbox-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox, remoteproc: omap2+: fix compile testing
dt-bindings: mailbox: qcom-ipcc: Document QCS8300 IPCC
dt-bindings: mailbox: qcom-ipcc: document the support for SA8255p
dt-bindings: mailbox: mtk,adsp-mbox: Add compatible for MT8188
mailbox: Use of_property_match_string() instead of open-coding
mailbox: bcm2835: Fix timeout during suspend mode
mailbox: sprd: Use devm_clk_get_enabled() helpers
mailbox: rockchip: fix a typo in module autoloading
mailbox: imx: use device name in interrupt name
mailbox: ARM_MHU_V3 should depend on ARM64
Pull i2c fixes from Wolfram Sang:
- fix DesignWare driver ENABLE-ABORT sequence, ensuring ABORT can
always be sent when needed
- check for PCLK in the SynQuacer controller as an optional clock,
allowing ACPI to directly provide the clock rate
- KEBA driver Kconfig dependency fix
- fix XIIC driver power suspend sequence
* tag 'i2c-for-6.12-rc1-additional_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: xiic: Fix pm_runtime_set_suspended() with runtime pm enabled
i2c: keba: I2C_KEBA should depend on KEBA_CP500
i2c: synquacer: Deal with optional PCLK correctly
i2c: designware: fix controller is holding SCL low while ENABLE bit is disabled
Pull dma-mapping fix from Christoph Hellwig:
- handle chained SGLs in the new tracing code (Christoph Hellwig)
* tag 'dma-mapping-6.12-2024-09-29' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: fix DMA API tracing for chained scatterlists
Pull more SCSI updates from James Bottomley:
"These are mostly minor updates.
There are two drivers (lpfc and mpi3mr) which missed the initial
pull and a core change to retry a start/stop unit which affect
suspend/resume"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: lpfc: Update lpfc version to 14.4.0.5
scsi: lpfc: Support loopback tests with VMID enabled
scsi: lpfc: Revise TRACE_EVENT log flag severities from KERN_ERR to KERN_WARNING
scsi: lpfc: Ensure DA_ID handling completion before deleting an NPIV instance
scsi: lpfc: Fix kref imbalance on fabric ndlps from dev_loss_tmo handler
scsi: lpfc: Restrict support for 32 byte CDBs to specific HBAs
scsi: lpfc: Update phba link state conditional before sending CMF_SYNC_WQE
scsi: lpfc: Add ELS_RSP cmd to the list of WQEs to flush in lpfc_els_flush_cmd()
scsi: mpi3mr: Update driver version to 8.12.0.0.50
scsi: mpi3mr: Improve wait logic while controller transitions to READY state
scsi: mpi3mr: Update MPI Headers to revision 34
scsi: mpi3mr: Use firmware-provided timestamp update interval
scsi: mpi3mr: Enhance the Enable Controller retry logic
scsi: sd: Fix off-by-one error in sd_read_block_characteristics()
scsi: pm8001: Do not overwrite PCI queue mapping
scsi: scsi_debug: Remove a useless memset()
scsi: pmcraid: Convert comma to semicolon
scsi: sd: Retry START STOP UNIT commands
scsi: mpi3mr: A performance fix
scsi: ufs: qcom: Update MODE_MAX cfg_bw value
...
Pull more bcachefs updates from Kent Overstreet:
"Assorted minor syzbot fixes, and for bigger stuff:
Fix two disk accounting rewrite bugs:
- Disk accounting keys use the version field of bkey so that journal
replay can tell which updates have been applied to the btree.
This is set in the transaction commit path, after we've gotten our
journal reservation (and our time ordering), but the
BCH_TRANS_COMMIT_skip_accounting_apply flag that journal replay
uses was incorrectly skipping this for new updates generated prior
to journal replay.
This fixes the underlying cause of an assertion pop in
disk_accounting_read.
- A couple of fixes for disk accounting + device removal.
Checking if acocunting replicas entries were marked in the
superblock was being done at the wrong point, when deltas in the
journal could still zero them out, and then additionally we'd try
to add a missing replicas entry to the superblock without checking
if it referred to an invalid (removed) device.
A whole slew of repair fixes:
- fix infinite loop in propagate_key_to_snapshot_leaves(), this fixes
an infinite loop when repairing a filesystem with many snapshots
- fix incorrect transaction restart handling leading to occasional
"fsck counted ..." warnings
- fix warning in __bch2_fsck_err() for bkey fsck errors
- check_inode() in fsck now correctly checks if the filesystem was
clean
- there shouldn't be pending logged ops if the fs was clean, we now
check for this
- remove_backpointer() doesn't remove a dirent that doesn't actually
point to the inode
- many more fsck errors are AUTOFIX"
* tag 'bcachefs-2024-09-28' of git://evilpiepirate.org/bcachefs: (35 commits)
bcachefs: check_subvol_path() now prints subvol root inode
bcachefs: remove_backpointer() now checks if dirent points to inode
bcachefs: dirent_points_to_inode() now warns on mismatch
bcachefs: Fix lost wake up
bcachefs: Check for logged ops when clean
bcachefs: BCH_FS_clean_recovery
bcachefs: Convert disk accounting BUG_ON() to WARN_ON()
bcachefs: Fix BCH_TRANS_COMMIT_skip_accounting_apply
bcachefs: Check for accounting keys with bversion=0
bcachefs: rename version -> bversion
bcachefs: Don't delete unlinked inodes before logged op resume
bcachefs: Fix BCH_SB_ERRS() so we can reorder
bcachefs: Fix fsck warnings from bkey validation
bcachefs: Move transaction commit path validation to as late as possible
bcachefs: Fix disk accounting attempting to mark invalid replicas entry
bcachefs: Fix unlocked access to c->disk_sb.sb in bch2_replicas_entry_validate()
bcachefs: Fix accounting read + device removal
bcachefs: bch_accounting_mode
bcachefs: fix transaction restart handling in check_extents(), check_dirents()
bcachefs: kill inode_walker_entry.seen_this_pos
...
Pull x86 fixes from Ingo Molnar:
"Fix TDX MMIO #VE fault handling, and add two new Intel model numbers
for 'Pantherlake' and 'Diamond Rapids'"
* tag 'x86-urgent-2024-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add two Intel CPU model numbers
x86/tdx: Fix "in-kernel MMIO" check
Pull coccinelle updates from Julia Lawall:
"Extend string_choices.cocci to use more available helpers
Ten patches from Hongbo Li extending string_choices.cocci with the
complete set of functions offered by include/linux/string_choices.h.
One patch from myself reducing the number of redundant cases that are
checked by Coccinelle, giving a small performance improvement"
* tag 'cocci-for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
Reduce Coccinelle choices in string_choices.cocci
coccinelle: Remove unnecessary parentheses for only one possible change.
coccinelle: Add rules to find str_yes_no() replacements
coccinelle: Add rules to find str_on_off() replacements
coccinelle: Add rules to find str_write_read() replacements
coccinelle: Add rules to find str_read_write() replacements
coccinelle: Add rules to find str_enable{d}_disable{d}() replacements
coccinelle: Add rules to find str_lo{w}_hi{gh}() replacements
coccinelle: Add rules to find str_hi{gh}_lo{w}() replacements
coccinelle: Add rules to find str_false_true() replacements
coccinelle: Add rules to find str_true_false() replacements
