When looking at flamegraphs, there is a pretty large entry for the
function call drop_in_place::<Option<Allocation>> which in turn calls
drop_in_place::<Allocation>. Combined with the looper_need_return
condition, this means that the generated code looks like this:
if let Some(buffer) = buffer {
if buffer.looper_need_return_on_free() {
self.inner.lock().looper_need_return = true;
}
}
drop_in_place::<Option<Allocation>>() { // not inlined
if let Some(buffer) = buffer {
drop_in_place::<Allocation>(buffer);
}
}
This kind of situation where you check X and then check X again is
normally optimized into a single condition, but in this case due to the
non-inlined function call to drop_in_place::<Option<Allocation>>, that
optimization does not happen.
Furthermore, the drop_in_place::<Allocation> call is only two-thirds of
the drop_in_place::<Option<Allocation>> call in the flamegraph. This
indicates that this double condition is not performing well. Also, last
time I looked at Binder perf, I remember finding that the destructor of
Allocation was involved with many branch mispredictions.
Thus, change this code to look like this:
if let Some(buffer) = buffer {
if buffer.looper_need_return_on_free() {
self.inner.lock().looper_need_return = true;
}
drop_in_place::<Allocation>(buffer);
}
by dropping the Allocation directly. Flamegraphs confirm that the
drop_in_place::<Option<Allocation>> call disappears from this change.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://patch.msgid.link/20251029-binder-bcfreebuf-option-v1-1-4d282be0439f@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some devices reserve a larger NVMEM region for the U-Boot environment
than the actual environment data length used by U-Boot itself. The CRC32
in the U-Boot header is calculated over the smaller data length, causing
CRC validation to fail when Linux reads the full partition.
Allow an optional device tree property "env-size" to specify the
environment data size to use for CRC computation.
v2: add missing $ref line to DT binding
Signed-off-by: Jascha Sundaresan <flizarthanon@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20251114110636.143268-5-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen Rothwell reports htmldocs warnings when merging char-misc tree:
WARNING: include/linux/firmware/intel/stratix10-svc-client.h:22 This comment
starts with '/**', but isn't a kernel-doc comment.
WARNING: include/linux/firmware/intel/stratix10-svc-client.h:184 Enum value
'COMMAND_HWMON_READTEMP' not described in enum 'stratix10_svc_command_code'
WARNING: include/linux/firmware/intel/stratix10-svc-client.h:184 Enum value
'COMMAND_HWMON_READVOLT' not described in enum 'stratix10_svc_command_code'
WARNING: include/linux/firmware/intel/stratix10-svc-client.h:307 function
parameter 'cb_arg' not described in 'async_callback_t'
Fixes: 4f49088c16 ("firmware: stratix10-svc: Add definition for voltage and temperature sensor")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20251114153920.1c5df700@canb.auug.org.au/
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://patch.msgid.link/20251114185815.358423-3-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen Rothwell reports htmldocs warnings when merging char-misc tree:
WARNING: drivers/firmware/stratix10-svc.c:58 This comment starts with '/**',
but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Total number of transaction IDs, which is a combination of
WARNING: drivers/firmware/stratix10-svc.c:302 This comment starts with '/**',
but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* svc_mem_lock protects access to the svc_data_mem list for
Fixes: bcb9f4f070 ("firmware: stratix10-svc: Add support for async communication")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20251114153347.16001109@canb.auug.org.au/
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://patch.msgid.link/20251114185815.358423-2-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Georgi writes:
interconnect changes for 6.19
This pull request contains the interconnect changes for the 6.19-rc1
merge window. The core and driver changes are listed below.
Core changes:
- kbps_to_icc() macro optimization
Driver changes:
- Switch all Qualcomm RPMh interconnect drivers to use the dynamic
node IDs and drop support for non-dynamic ID allocation
- Add new driver and BWMON support for the Kaanapali SoC
- Add QoS support for the SM6350 SoC
- Add QoS support for the SA8775p SoC
- Fix missing link from SNOC_PNOC to the USB 2 on MSM8996 SoC that
includes also a dts change that has been acked by the maintainer
- Drop the QPIC interconnect and BCM nodes for the SDX75 SoC, as these
should be handled by the rpmh-clk driver
- Other misc fixes
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.19-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc: (40 commits)
interconnect: qcom: sm6350: enable QoS configuration
interconnect: qcom: sm6350: Remove empty BCM arrays
interconnect: qcom: icc-rpmh: Get parent's regmap for nested NoCs
dt-bindings: interconnect: qcom,sm6350-rpmh: Add clocks for QoS
dt-bindings: interconnect: qcom-bwmon: Document Kaanapali BWMONs
interconnect: qcom: icc-rpmh: drop support for non-dynamic IDS
interconnect: qcom: sm8750: convert to dynamic IDs
interconnect: qcom: sm8650: convert to dynamic IDs
interconnect: qcom: sm8550: convert to dynamic IDs
interconnect: qcom: sm8450: convert to dynamic IDs
interconnect: qcom: sm8350: convert to dynamic IDs
interconnect: qcom: sm8150: convert to dynamic IDs
interconnect: qcom: sm7150: convert to dynamic IDs
interconnect: qcom: sm6350: convert to dynamic IDs
interconnect: qcom: sdx75: convert to dynamic IDs
interconnect: qcom: sdx65: convert to dynamic IDs
interconnect: qcom: sdx55: convert to dynamic IDs
interconnect: qcom: sdm670: convert to dynamic IDs
interconnect: qcom: sc7180: convert to dynamic IDs
interconnect: qcom: sar2130p: convert to dynamic IDs
...
Suzuki writes:
coresight: Updates for Linux v6.19
The changes for Linux v6.19 include :
- Support for static TPDM
- Fixes to TMC-ETR with CATU where buffer wasn't available to CATU in perf mode
- Clean ups to the component operations to accept coresight_path
- Fixes to the ETM4x/ETM3x driver
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v6.19' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux:
coresight: etm4x: Remove the state_needs_restore flag
coresight: etm4x: Remove the redundant DSB
coresight: etm4x: Properly control filter in CPU idle with FEAT_TRF
coresight: etm4x: Add context synchronization before enabling trace
coresight: etm4x: Correct polling IDLE bit
coresight: etm3x: Always set tracer's device mode on target CPU
coresight: etm4x: Always set tracer's device mode on target CPU
coresight: Change device mode to atomic type
coresight: change the sink_ops to accept coresight_path
coresight: change helper_ops to accept coresight_path
coresight: tmc: add the handle of the event to the path
coresight: tpdm: remove redundant check for drvdata
coresight: tpdm: add static tpdm support
dt-bindings: arm: document the static TPDM compatible
coresight: ETR: Fix ETR buffer use-after-free issue
Manivannan writes:
MHI Host
========
- Add support for Telit FE990B40 and Foxconn T99W760 modems
MHI Endpoint
============
- Make 'struct mhi_ep_bus_type' const as the driver core now handles the const
bus_type.
- Add WQ_PERCPU flag to alloc_workqueue() as a part of the workqueue refactoring
* tag 'mhi-for-v6.19' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
bus: mhi: host: pci_generic: Add Foxconn T99W760 modem
bus: mhi: ep: add WQ_PERCPU to alloc_workqueue users
bus: mhi: host: pci_generic: Add Telit FE990B40 modem support
bus: mhi: ep: Make mhi_ep_bus_type const
Jonathan writes:
IIO: New device support, features and cleanup for 6.19
The usual bunch of new device support, but also quite a bit of cleanup
of the core and older drivers which is always good to see.
New device support
------------------
adi,ad4080
- Add support for AD4081, AD4083, AD4084, AD4086 and AD4087 ADCs with
slightly different features to existing supported parts (max CNV clock
count, resolution etc)
adi,adxl380
- Add support for ADXL318 and ADXL319 which have reduced functionality
compared to other supported parts, particularly around event detection.
aosong,adp810
- New driver for this differential pressure and temperature sensor.
aspeed,adc
- Add support for the AST2700 SoC ADCs which differ in small ways from
already supported parts.
bosch,sm330
- New driver for this IMU (accelerometer + gyroscop) with I2C and SPI bus
support.
invensense,icm45600
- New driver for this family of IMUs with sub drivers for accelerometer
and gyroscope elements. I2C, I3C and SPI busses all supported.
* Supports ICM45605, ICM45606, ICM45608, ICM45634, ICM45686, ICM45687,
ICM45688P, ICM45689.
* Support basic features and FIFO.
maxim,max14001
- New driver for the MAX14001 and MAX14002 ADCs.
renesas,rzt2h
- New driver supporting the RZ/T2H and RZ/N2H ADCs found in various SoCs.
renesas,rznl
- New driver supporting the RZ/NL ADC found in various SoCs.
Features
--------
adi,ad5446
- Add a DT binding doc for the 29 variants currently covered by the driver.
- Add adi,ad5542 which is compatiable with the adi,ad5542a which was
already supported.
bosch,bma220
- I2C support including an I2C bus watchdog.
- Power supply control
- Data ready trigger.
- Low pass filter control.
- Debugfs register access.
- Add Petre Rodan as a maintainer of this driver (thanks!)
bosch,bmi270
- Add support for motion events.
fsl,mpl3115
- Add a dataready trigger and related sampling frequency control.
- Add threshold events.
infineon,dps310
- Add a specific device tree binding.
maxim,max30100
- Allow control of LED pulse-width in dt-binding. Optimum value depends
on physical characteristics of the device which contains this sensor.
mediatek,mt2701
- Add dt compatible for the mt8189.
rockchip,saradc
- Add rk3506 compatible which is functionally the same as the already
supported rk3528 (which is therefore the fallback)
st,lsm6dsx
- Make sampling more flexible when both fifo and events are of interest
by decoupling the FIFO fill rate from actual sampling.
Cleanup and minor fixes
-----------------------
core
- Document and add might_sleep() to iio_push_to_buffers_with_ts_unaligned()
as it allocates a buffer, typically just on 1st call.
- Add documentation for iio_push_to_buffers_with_ts() which is being used
to replace iio_push_to_buffers_with_timestamp() in new code as it
validates the buffer size. Make the deprecation of the old function
clear.
- Document that the store_to() callback in struct iio_buffer_access_funcs
may be called from contexts that cannot sleep.
- Document that the cb() provided to a callback buffer may be called
from contexts that cannot sleep.
- Cleanup up industrialio-backend.c comments.
- Call mutex_destroy() in cleanup of buffers.
- Call device_initialize() later to avoid having to call device_put()
before configuration is otherwise complete.
- Use mutex_init_with_key() to replace opencoded version.
- Use dma_buf_unmap_attachment_unlocked() to replace opencoded version.
- Reorder Makefile for pressure sensors.
various
- Uses sysfs_emit() to replace sprintf() in read_label() and other
callbacks that typically are used to write data to sysfs buffers.
- Switch to REGCACHE_MAPLE in various drivers.
adi,docs
- Fix up formatting of cross references and other kernel-doc issues.
adi,ad4080
- Fix wrong masking of product IDs.
adi,ad5446
- Use DMA safe buffers as needed for SPI.
- Drop a duplicate device chip specific data structure where two parts
are functionally identical.
- Fail probe if reference is not available.
- Split up the massive array of chip type specific structures into
separate structures as this tends to be easier to read and maintain.
- Add explicit of_device_id entries for all supported parts.
- Split I2C and SPI parts away from core to avoid ifdef complexity.
- Switch to devm_mutex_init().
- Make use of guard() to simplify code.
- Applying IWYU principles and reorder headers.
- Various other minor cleanup.
adi,ad7124
- Add debugfs to support single cycle mode, typically only used for cases
such as validate performance of the ADC.
- Various other minor cleanup including removing some layers of indirection
that weren't necessary.
- Add extended attributes to the temperature channel which follows the same
signal path as other channels.
- Replace the setup register allocation strategy with a simpler more
predictable one (a fix for OOB from this code follows later in this pull
request).
adi,adxl345
- Ensure dt-binding allows for both interrupt wired at the same time.
arm,scmi
- Replace const_ilog2() with the resulting value which ends up simpler
to read.
bosch,bma220
- Add correct SPI mode specification to the device tree binding.
- Fix up interrupt type in dt binding example to match that the driver
expects.
- Relax hard constraint on matching chip ID with a message only so as to
enable fallback DT compatibles to work.
- Use local struct device *dev to replaces lots of indirect look ups.
- Improve includes on approximate IWYU basis.
- Explicit of_match_table.
- Reset some registers during probe.
- Move to regmap.
- Ensure a timestamp is available when filling the buffer by using a
locally acquired one rather than relying on trigger top half running.
- Add a utility function to search value pair tables for a match.
- Various other minor improvements.
- Move code to avoid a false dependency of the core code on the I2C module.
bosch,bma400
- Improve register and field naming + organization. Use with FIELD_GET()
and FIELD_PREP() to allow dropping of shift defines.
- Use macros to define event related fields.
- Switch to an address lookup based on an index variable to replace lots of
very similar register macros.
- Rename activity_event_en() to generic_event_en() to better reflect what
it does.
- Improve comments around interrupt register handling.
fsl,mpl3115
- Factor out code for triggered buffer data collection.
- Use more consistent register field naming style.
- Use get_unaligned_be24() to get the pressure.
invensense,mpu6050
- Drop false requirement in DT binding for the interrupt. The driver will
be able to do less if one is not provided, but some features are still
available.
invensense,icm45600_i3c
- Fix missing return on failure to match part.
linear,ltc2688
- Use devm_mutex_init() so mutex_destroy() is called in tear down path.
- Use guard() to simplify lock handling in error return paths.
qcom,vadc
- Fix up some kernel-doc related warnings.
rohm,bd79112 and bd79124
- Use regmap_reg_range() helper to set the ranges.
st,lsm6dsx
- Fix units of ODR in structure documentation.
ti,am335x
- Add range checks to avoid a compiler warning.
ti,pac1934
- Switch to system_percpu_wq.
Various other minor typo fixes etc.
* tag 'iio-for-6.19a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (150 commits)
staging: iio: adt7316: replace sprintf() with sysfs_emit()
iio: pressure: Arrange Makefile alphabetically
iio: ABI: document pressure event attributes
iio: mpl3115: add threshold events support
iio: mpl3115: use get_unaligned_be24() to retrieve pressure data
iio: buffer: use dma_buf_unmap_attachment_unlocked() helper
iio: core: Replace lockdep_set_class() + mutex_init() by combined call
iio: core: Clean up device correctly on iio_device_alloc() failure
iio: core: add missing mutex_destroy in iio_dev_release()
iio: accel: adxl380: add support for ADXL318 and ADXL319
dt-bindings: iio: accel: adxl380: add new supported parts
iio: imu: inv_icm45600: Initializes inv_icm45600_buffer_postdisable() sleep
iio: adc: pac1934: replace use of system_wq with system_percpu_wq
iio: dac: ad5446: Add AD5542 to the spi id table
iio: dac: ad5446: Fix coding style issues
iio: dac: ad5446: Refactor header inclusion
iio: dac: ad5446: Make use of the cleanup helpers
iio: dac: ad5446: Make use of devm_mutex_init()
iio: dac: ad5446: Separate I2C/SPI into different drivers
iio: dac: ad5456: Add missing DT compatibles
...
Krzysztof writes:
1-Wire bus drivers for v6.19
Just a bunch of cleanups for few 1-Wire drivers: use sysfs_emit() in
sysfs show, avoid strcpy() and strcat(), and drop unneeded
pm_runtime_mark_last_busy() because core runtime PM handles it.
* tag 'w1-drv-6.19' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux-w1:
w1: omap-hdq: Remove redundant pm_runtime_mark_last_busy() calls
w1: ds28e17: Replace deprecated strcpy + strcat in w1_f19_add_slave
w1: use sysfs_emit() in sysfs show() callbacks
Xu writes:
FPGA Manager changes for 6.17-rc1
- Matthew hands over the maintainership of Intel MAX10 BMC secure
update to Yilun.
- Fabio adds missing spi_device_id table for xilinx-spi
- Dihn updates link for Altera & AMD's dt-bindings.
- Andy uses pci_find_vsec_capability() instead of open-codes for
altera-cvp.
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-6.19-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: altera-cvp: Use pci_find_vsec_capability() when probing FPGA device
dt-bindings: fpga: update link for Altera's and AMD partial recon
fpga: xilinx-spi: Add missing spi_device_id table
MAINTAINERS: change maintainer for Intel MAX10 BMC secure updates
T99W760 modem is based on Qualcomm SDX35 chipset. It uses the same channel
configurations of Foxconn SDX61 modem. Hence, add support for it by reusing
the 'modem_foxconn_sdx61_config' config structure.
The EDL firmware for this modem has been pushed to linux-firmware.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
[mani: reworded description]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20251119105615.48295-2-slark_xiao@163.com
Update dt-bindings, driver and dts in order to configure the QoS
registers for the various SM6350 interconnects.
* icc-sm6350
dt-bindings: interconnect: qcom,sm6350-rpmh: Add clocks for QoS
interconnect: qcom: icc-rpmh: Get parent's regmap for nested NoCs
interconnect: qcom: sm6350: Remove empty BCM arrays
interconnect: qcom: sm6350: enable QoS configuration
Link: https://lore.kernel.org/r/20251114-sm6350-icc-qos-v2-0-6af348cb9c69@fairphone.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Enable QoS configuration for master ports with predefined values for
priority and urgency forwarding.
While this does require some "clocks" to be specified in devicetree to
work correctly, thanks to ".qos_requires_clocks = true," this is
backwards compatible with old DT as QoS programming will be skipped for
aggre1_noc and aggre2_noc when clocks are not provided.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20251114-sm6350-icc-qos-v2-4-6af348cb9c69@fairphone.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Convert several sprintf() calls to sysfs_emit() in the
sysfs show functions, as it is the preferred helper and
prevents potential buffer overruns.
No functional changes intended.
Signed-off-by: Shi Hao <i.shihao.999@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix hp206c and st_pressure_* entries in pressure Makefiles to follow
alphabetical order as per guideline mentioned in iio/pressure/Makefile.
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add sysfs pressure event attributes exposed by the mpl3115 driver. These
allow controlling the threshold value and the enable state.
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for pressure and temperature rising threshold events. For
both channels *_en and *_value (in raw units) attributes are exposed.
Since in write_event_config() the ctrl_reg1.active and ctrl_reg4
are modified, accessing the data->ctrl_reg{1,4} in set_trigger_state()
and write_event_config() needs to be now guarded by data->lock.
Otherwise, it would be possible that 2 concurrent threads executing
these functions would access the data->ctrl_reg{1,4} at the same time
and then one would overwrite the other's result.
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The pressure measurement result is arranged as 20-bit unsigned value
residing in three 8-bit registers. Hence, it can be retrieved using
get_unaligned_be24() and by applying 4-bit shift.
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace open-coded dma_resv_lock()/dma_resv_unlock() around
dma_buf_unmap_attachment() in iio_buffer_dmabuf_release() with the
dma_buf_unmap_attachment_unlocked() helper.
This aligns with the standard DMA-BUF API, avoids duplicating
locking logic and eases future maintenance. No functional change.
Reviewed-by: fanggeng <fanggeng@lixiang.com>
Signed-off-by: Liang Jie <liangjie@lixiang.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Once we called device_initialize() we have to call put_device()
on it. Refactor the code to make it in the right order.
Fixes: fe6f45f6ba ("iio: core: check return value when calling dev_set_name()")
Fixes: 847ec80bba ("Staging: IIO: core support for device registration and management")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add missing mutex_destroy() call in iio_dev_release() to properly
clean up the mutex initialized in iio_device_alloc(). Ensure proper
resource cleanup and follows kernel practices.
Found by code review.
While at it, create a lockdep key before mutex initialisation.
This will help with converting it to the better API in the future.
Fixes: 847ec80bba ("Staging: IIO: core support for device registration and management")
Fixes: ac917a8111 ("staging:iio:core set the iio_dev.info pointer to null on unregister under lock.")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ADXL318 and ADXL319 are low noise density, low power, 3-axis
accelerometers based on ADXL380 and ADXL382, respectively. The main
difference between the new parts and the existing ones are the absence
of interrupts and events like tap detection, activity/inactivity, and
free-fall detection.
Other differences in the new parts are fewer power modes, basically
allowing only idle and measurement modes, and the removal of the 12-bit
SAR ADC path for the 3-axis signals (known as lower signal chain),
being excluisive for the temperature sensor in the ADXL318/319.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Include ADXL318 and ADXL319 accelerometers to the documentation.
The ADXL318 is based on the ADXL380, while the ADXL319 is based on the
ADXL382. However, the ADXL318/319 do not support some built-in features
like single tap, double tap and triple tap detection, and also activity
and inactivity detection.
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Dinh writes:
SoCFPGA firmware updates for v6.19
- Add support for voltage and temperature sensor
- Add a mutex to memory operations on Stratix10 service driver
- Add support for asynchronous communications in the service driver
- Replace scnprintf() with sysfs_emit()
* tag 'socfpga_firmware_updates_for_v6.19' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
firmware: stratix10-rsu: replace scnprintf() with sysfs_emit() in *_show() functions
firmware: stratix10-rsu: Migrate RSU driver to use stratix10 asynchronous framework.
firmware: stratix10-svc: Add support for RSU commands in asynchronous framework
firmware: stratix10-svc: Add support for async communication
firmware: stratix10-svc: Add mutex in stratix10 memory management
firmware: stratix10-svc: Add definition for voltage and temperature sensor
Iwona writes:
Update peci-next for v6.19-rc1
A small change in peci-aspeed converting the driver away from deprecated
round_rate(), allowing it to eventually be removed from clk subsystem.
* tag 'peci-next-6.19-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/iwi/linux:
peci: controller: peci-aspeed: convert from round_rate() to determine_rate()
Replace scnprintf() with sysfs_emit() in sysfs *_show() functions
in stratix10-rsu.c to follow the kernel's guidelines from
Documentation/filesystems/sysfs.rst.
This improves consistency, safety, and makes the code easier to
maintain and update in the future.
Signed-off-by: Rahul Kumar <rk0006818@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
* Add support for asynchronous communication to the RSU client channel.
* Migrate functions that communicate with the SDM to use the asynchronous
framework.
Signed-off-by: Mahesh Rao <mahesh.rao@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Integrate Remote System Update(RSU) service commands into the
asynchronous framework for communicating with SDM. This allows the RSU
commands to be processed asynchronously, improving the responsiveness
of the Stratix10 service channel.
The asynchronous framework now supports the following RSU commands:
* COMMAND_RSU_GET_SPT_TABLE
* COMMAND_RSU_STATUS
* COMMAND_RSU_NOTIFY
Signed-off-by: Mahesh Rao <mahesh.rao@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Introduce support for asynchronous communication with the Stratix10
service channel. Define new structures to enable asynchronous messaging
with the Secure Device Manager (SDM). Add and remove asynchronous
support for existing channels. Implement initialization and cleanup
routines for the asynchronous framework. Enable sending and polling of
messages to the SDM asynchronously.
The new public functions added are:
- stratix10_svc_add_async_client: Adds a client to the service channel.
- stratix10_svc_remove_async_client: Removes an asynchronous client from
the service channel.
- stratix10_svc_async_send: Sends an asynchronous message to the SDM
mailbox in EL3 secure firmware.
- stratix10_svc_async_poll: Polls the status of an asynchronous service
request in EL3 secure firmware.
- stratix10_svc_async_done: Marks an asynchronous transaction as
complete and frees up the resources.
These changes enhance the functionality of the Stratix10 service channel
by allowing for more efficient and flexible communication with the
firmware.
Signed-off-by: Mahesh Rao <mahesh.rao@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Add mutex lock to stratix10_svc_allocate_memory and
stratix10_svc_free_memory for thread safety. This prevents race
conditions and ensures proper synchronization during memory operations.
This is required for parallel communication with the Stratix10 service
channel.
Fixes: 7ca5ce8965 ("firmware: add Intel Stratix10 service layer driver")
Cc: stable@vger.kernel.org
Signed-off-by: Mahesh Rao <mahesh.rao@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Add entry in Stratix 10 Service Layer to support temperature and voltage
sensor.
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
When the restore flow is invoked, it means no error occurred during the
save phase. Otherwise, if any errors happened while saving the context,
the function would return an error and abort the suspend sequence.
Therefore, the state_needs_restore flag is unnecessary. The save and
restore functions are changed to check two conditions:
1) The global flag pm_save_enable is SELF_HOSTED mode;
2) The device is in active mode (non DISABLED).
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251111-arm_coresight_power_management_fix-v6-8-f55553b6c8b3@arm.com
As recommended in section 4.3.7 "Synchronization when using the
memory-mapped interface" of ARM IHI0064H.b:
When using the memory-mapped interface to program the trace unit, the
trace analyzer must ensure that writes have completed, to ensure that
the trace unit is fully programmed and either enabled or disabled.
To ensure writes have completed, the trace analyzer can do ...
If the memory marked is as Device-nGnRE or stronger, read back the
value of any register in the trace unit. This relies on peripheral
coherence order defined in the Arm architecture.
Polling TRCSTATR ensures the previous write has completed. Therefore,
removes the redundant DSB barrier in the enabling flow.
Update the comment in the disable flow for consistency.
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251111-arm_coresight_power_management_fix-v6-7-f55553b6c8b3@arm.com
