Pull vfs 'protection info' updates from Christian Brauner:
"This adds the new FS_IOC_GETLBMD_CAP ioctl() to query metadata and
protection info (PI) capabilities. This ioctl returns information
about the files integrity profile. This is useful for userspace
applications to understand a files end-to-end data protection support
and configure the I/O accordingly.
For now this interface is only supported by block devices. However the
design and placement of this ioctl in generic FS ioctl space allows us
to extend it to work over files as well. This maybe useful when
filesystems start supporting PI-aware layouts.
A new structure struct logical_block_metadata_cap is introduced, which
contains the following fields:
- lbmd_flags:
bitmask of logical block metadata capability flags
- lbmd_interval:
the amount of data described by each unit of logical block metadata
- lbmd_size:
size in bytes of the logical block metadata associated with each
interval
- lbmd_opaque_size:
size in bytes of the opaque block tag associated with each interval
- lbmd_opaque_offset:
offset in bytes of the opaque block tag within the logical block
metadata
- lbmd_pi_size:
size in bytes of the T10 PI tuple associated with each interval
- lbmd_pi_offset:
offset in bytes of T10 PI tuple within the logical block metadata
- lbmd_pi_guard_tag_type:
T10 PI guard tag type
- lbmd_pi_app_tag_size:
size in bytes of the T10 PI application tag
- lbmd_pi_ref_tag_size:
size in bytes of the T10 PI reference tag
- lbmd_pi_storage_tag_size:
size in bytes of the T10 PI storage tag
The internal logic to fetch the capability is encapsulated in a helper
function blk_get_meta_cap(), which uses the blk_integrity profile
associated with the device. The ioctl returns -EOPNOTSUPP, if
CONFIG_BLK_DEV_INTEGRITY is not enabled"
* tag 'vfs-6.17-rc1.integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
block: fix lbmd_guard_tag_type assignment in FS_IOC_GETLBMD_CAP
block: fix FS_IOC_GETLBMD_CAP parsing in blkdev_common_ioctl()
fs: add ioctl to query metadata and protection info capabilities
nvme: set pi_offset only when checksum type is not BLK_INTEGRITY_CSUM_NONE
block: introduce pi_tuple_size field in blk_integrity
block: rename tuple_size field in blk_integrity to metadata_size
Pull pidfs updates from Christian Brauner:
- persistent info
Persist exit and coredump information independent of whether anyone
currently holds a pidfd for the struct pid.
The current scheme allocated pidfs dentries on-demand repeatedly.
This scheme is reaching it's limits as it makes it impossible to pin
information that needs to be available after the task has exited or
coredumped and that should not be lost simply because the pidfd got
closed temporarily. The next opener should still see the stashed
information.
This is also a prerequisite for supporting extended attributes on
pidfds to allow attaching meta information to them.
If someone opens a pidfd for a struct pid a pidfs dentry is allocated
and stashed in pid->stashed. Once the last pidfd for the struct pid
is closed the pidfs dentry is released and removed from pid->stashed.
So if 10 callers create a pidfs dentry for the same struct pid
sequentially, i.e., each closing the pidfd before the other creates a
new one then a new pidfs dentry is allocated every time.
Because multiple tasks acquiring and releasing a pidfd for the same
struct pid can race with each another a task may still find a valid
pidfs entry from the previous task in pid->stashed and reuse it. Or
it might find a dead dentry in there and fail to reuse it and so
stashes a new pidfs dentry. Multiple tasks may race to stash a new
pidfs dentry but only one will succeed, the other ones will put their
dentry.
The current scheme aims to ensure that a pidfs dentry for a struct
pid can only be created if the task is still alive or if a pidfs
dentry already existed before the task was reaped and so exit
information has been was stashed in the pidfs inode.
That's great except that it's buggy. If a pidfs dentry is stashed in
pid->stashed after pidfs_exit() but before __unhash_process() is
called we will return a pidfd for a reaped task without exit
information being available.
The pidfds_pid_valid() check does not guard against this race as it
doens't sync at all with pidfs_exit(). The pid_has_task() check might
be successful simply because we're before __unhash_process() but
after pidfs_exit().
Introduce a new scheme where the lifetime of information associated
with a pidfs entry (coredump and exit information) isn't bound to the
lifetime of the pidfs inode but the struct pid itself.
The first time a pidfs dentry is allocated for a struct pid a struct
pidfs_attr will be allocated which will be used to store exit and
coredump information.
If all pidfs for the pidfs dentry are closed the dentry and inode can
be cleaned up but the struct pidfs_attr will stick until the struct
pid itself is freed. This will ensure minimal memory usage while
persisting relevant information.
The new scheme has various advantages. First, it allows to close the
race where we end up handing out a pidfd for a reaped task for which
no exit information is available. Second, it minimizes memory usage.
Third, it allows to remove complex lifetime tracking via dentries
when registering a struct pid with pidfs. There's no need to get or
put a reference. Instead, the lifetime of exit and coredump
information associated with a struct pid is bound to the lifetime of
struct pid itself.
- extended attributes
Now that we have a way to persist information for pidfs dentries we
can start supporting extended attributes on pidfds. This will allow
userspace to attach meta information to tasks.
One natural extension would be to introduce a custom pidfs.* extended
attribute space and allow for the inheritance of extended attributes
across fork() and exec().
The first simple scheme will allow privileged userspace to set
trusted extended attributes on pidfs inodes.
- Allow autonomous pidfs file handles
Various filesystems such as pidfs and drm support opening file
handles without having to require a file descriptor to identify the
filesystem. The filesystem are global single instances and can be
trivially identified solely on the information encoded in the file
handle.
This makes it possible to not have to keep or acquire a sentinal file
descriptor just to pass it to open_by_handle_at() to identify the
filesystem. That's especially useful when such sentinel file
descriptor cannot or should not be acquired.
For pidfs this means a file handle can function as full replacement
for storing a pid in a file. Instead a file handle can be stored and
reopened purely based on the file handle.
Such autonomous file handles can be opened with or without specifying
a a file descriptor. If no proper file descriptor is used the
FD_PIDFS_ROOT sentinel must be passed. This allows us to define
further special negative fd sentinels in the future.
Userspace can trivially test for support by trying to open the file
handle with an invalid file descriptor.
- Allow pidfds for reaped tasks with SCM_PIDFD messages
This is a logical continuation of the earlier work to create pidfds
for reaped tasks through the SO_PEERPIDFD socket option merged in
923ea4d448 ("Merge patch series "net, pidfs: enable handing out
pidfds for reaped sk->sk_peer_pid"").
- Two minor fixes:
* Fold fs_struct->{lock,seq} into a seqlock
* Don't bother with path_{get,put}() in unix_open_file()
* tag 'vfs-6.17-rc1.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (37 commits)
don't bother with path_get()/path_put() in unix_open_file()
fold fs_struct->{lock,seq} into a seqlock
selftests: net: extend SCM_PIDFD test to cover stale pidfds
af_unix: enable handing out pidfds for reaped tasks in SCM_PIDFD
af_unix: stash pidfs dentry when needed
af_unix/scm: fix whitespace errors
af_unix: introduce and use scm_replace_pid() helper
af_unix: introduce unix_skb_to_scm helper
af_unix: rework unix_maybe_add_creds() to allow sleep
selftests/pidfd: decode pidfd file handles withou having to specify an fd
fhandle, pidfs: support open_by_handle_at() purely based on file handle
uapi/fcntl: add FD_PIDFS_ROOT
uapi/fcntl: add FD_INVALID
fcntl/pidfd: redefine PIDFD_SELF_THREAD_GROUP
uapi/fcntl: mark range as reserved
fhandle: reflow get_path_anchor()
pidfs: add pidfs_root_path() helper
fhandle: rename to get_path_anchor()
fhandle: hoist copy_from_user() above get_path_from_fd()
fhandle: raise FILEID_IS_DIR in handle_type
...
Pull fallocate updates from Christian Brauner:
"fallocate() currently supports creating preallocated files
efficiently. However, on most filesystems fallocate() will preallocate
blocks in an unwriten state even if FALLOC_FL_ZERO_RANGE is specified.
The extent state must later be converted to a written state when the
user writes data into this range, which can trigger numerous metadata
changes and journal I/O. This may leads to significant write
amplification and performance degradation in synchronous write mode.
At the moment, the only method to avoid this is to create an empty
file and write zero data into it (for example, using 'dd' with a large
block size). However, this method is slow and consumes a considerable
amount of disk bandwidth.
Now that more and more flash-based storage devices are available it is
possible to efficiently write zeros to SSDs using the unmap write
zeroes command if the devices do not write physical zeroes to the
media.
For example, if SCSI SSDs support the UMMAP bit or NVMe SSDs support
the DEAC bit[1], the write zeroes command does not write actual data
to the device, instead, NVMe converts the zeroed range to a
deallocated state, which works fast and consumes almost no disk write
bandwidth.
This series implements the BLK_FEAT_WRITE_ZEROES_UNMAP feature and
BLK_FLAG_WRITE_ZEROES_UNMAP_DISABLED flag for SCSI, NVMe and
device-mapper drivers, and add the FALLOC_FL_WRITE_ZEROES and
STATX_ATTR_WRITE_ZEROES_UNMAP support for ext4 and raw bdev devices.
fallocate() is subsequently extended with the FALLOC_FL_WRITE_ZEROES
flag. FALLOC_FL_WRITE_ZEROES zeroes a specified file range in such a
way that subsequent writes to that range do not require further
changes to the file mapping metadata. This flag is beneficial for
subsequent pure overwriting within this range, as it can save on block
allocation and, consequently, significant metadata changes"
* tag 'vfs-6.17-rc1.fallocate' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
ext4: add FALLOC_FL_WRITE_ZEROES support
block: add FALLOC_FL_WRITE_ZEROES support
block: factor out common part in blkdev_fallocate()
fs: introduce FALLOC_FL_WRITE_ZEROES to fallocate
dm: clear unmap write zeroes limits when disabling write zeroes
scsi: sd: set max_hw_wzeroes_unmap_sectors if device supports SD_ZERO_*_UNMAP
nvmet: set WZDS and DRB if device enables unmap write zeroes operation
nvme: set max_hw_wzeroes_unmap_sectors if device supports DEAC bit
block: introduce max_{hw|user}_wzeroes_unmap_sectors to queue limits
Pull namespace updates from Christian Brauner:
"This contains namespace updates. This time specifically for nsfs:
- Userspace heavily relies on the root inode numbers for namespaces
to identify the initial namespaces. That's already a hard
dependency. So we cannot change that anymore. Move the initial
inode numbers to a public header and align the only two namespaces
that currently don't do that with all the other namespaces.
- The root inode of /proc having a fixed inode number has been part
of the core kernel ABI since its inception, and recently some
userspace programs (mainly container runtimes) have started to
explicitly depend on this behaviour.
The main reason this is useful to userspace is that by checking
that a suspect /proc handle has fstype PROC_SUPER_MAGIC and is
PROCFS_ROOT_INO, they can then use openat2() together with
RESOLVE_{NO_{XDEV,MAGICLINK},BENEATH} to ensure that there isn't a
bind-mount that replaces some procfs file with a different one.
This kind of attack has lead to security issues in container
runtimes in the past (such as CVE-2019-19921) and libraries like
libpathrs[1] use this feature of procfs to provide safe procfs
handling functions"
* tag 'vfs-6.17-rc1.nsfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
uapi: export PROCFS_ROOT_INO
mntns: use stable inode number for initial mount ns
netns: use stable inode number for initial mount ns
nsfs: move root inode number to uapi
Pull coredump updates from Christian Brauner:
"This contains an extension to the coredump socket and a proper rework
of the coredump code.
- This extends the coredump socket to allow the coredump server to
tell the kernel how to process individual coredumps. This allows
for fine-grained coredump management. Userspace can decide to just
let the kernel write out the coredump, or generate the coredump
itself, or just reject it.
* COREDUMP_KERNEL
The kernel will write the coredump data to the socket.
* COREDUMP_USERSPACE
The kernel will not write coredump data but will indicate to the
parent that a coredump has been generated. This is used when
userspace generates its own coredumps.
* COREDUMP_REJECT
The kernel will skip generating a coredump for this task.
* COREDUMP_WAIT
The kernel will prevent the task from exiting until the coredump
server has shutdown the socket connection.
The flexible coredump socket can be enabled by using the "@@"
prefix instead of the single "@" prefix for the regular coredump
socket:
@@/run/systemd/coredump.socket
- Cleanup the coredump code properly while we have to touch it
anyway.
Split out each coredump mode in a separate helper so it's easy to
grasp what is going on and make the code easier to follow. The core
coredump function should now be very trivial to follow"
* tag 'vfs-6.17-rc1.coredump' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (31 commits)
cleanup: add a scoped version of CLASS()
coredump: add coredump_skip() helper
coredump: avoid pointless variable
coredump: order auto cleanup variables at the top
coredump: add coredump_cleanup()
coredump: auto cleanup prepare_creds()
cred: add auto cleanup method
coredump: directly return
coredump: auto cleanup argv
coredump: add coredump_write()
coredump: use a single helper for the socket
coredump: move pipe specific file check into coredump_pipe()
coredump: split pipe coredumping into coredump_pipe()
coredump: move core_pipe_count to global variable
coredump: prepare to simplify exit paths
coredump: split file coredumping into coredump_file()
coredump: rename do_coredump() to vfs_coredump()
selftests/coredump: make sure invalid paths are rejected
coredump: validate socket path in coredump_parse()
coredump: don't allow ".." in coredump socket path
...
Pull asm/param cleanup from Al Viro:
"This massages asm/param.h to simpler and more uniform shape:
- all arch/*/include/uapi/asm/param.h are either generated includes
of <asm-generic/param.h> or a #define or two followed by such
include
- no arch/*/include/asm/param.h anywhere, generated or not
- include <asm/param.h> resolves to arch/*/include/uapi/asm/param.h
of the architecture in question (or that of host in case of uml)
- include/asm-generic/param.h pulls uapi/asm-generic/param.h and
deals with USER_HZ, CLOCKS_PER_SEC and with HZ redefinition after
that"
* tag 'pull-headers_param' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
loongarch, um, xtensa: get rid of generated arch/$ARCH/include/asm/param.h
alpha: regularize the situation with asm/param.h
xtensa: get rid uapi/asm/param.h
Many controllers these days have started including grip buttons. As
there has been no particular assigned BTN_* constants for these, they've
been haphazardly assigned to BTN_TRIGGER_HAPPY*. Unfortunately, the
assignment of these has varied significantly between drivers.
Add and document new constants for these grip buttons.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20250702040102.125432-2-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following series contains Netfilter/IPVS updates for net-next:
1) Display netns inode in conntrack table full log, from lvxiafei.
2) Autoload nf_log_syslog in case no logging backend is available,
from Lance Yang.
3) Three patches to remove unused functions in x_tables, nf_tables and
conntrack. From Yue Haibing.
4) Exclude LEGACY TABLES on PREEMPT_RT: Add NETFILTER_XTABLES_LEGACY
to exclude xtables legacy infrastructure.
5) Restore selftests by toggling NETFILTER_XTABLES_LEGACY where needed.
From Florian Westphal.
6) Use CONFIG_INET_SCTP_DIAG in tools/testing/selftests/net/netfilter/config,
from Sebastian Andrzej Siewior.
7) Use timer_delete in comment in IPVS codebase, from WangYuli.
8) Dump flowtable information in nfnetlink_hook, this includes an initial
patch to consolidate common code in helper function, from Phil Sutter.
9) Remove unused arguments in nft_pipapo set backend, from Florian Westphal.
10) Return nft_set_ext instead of boolean in set lookup function,
from Florian Westphal.
11) Remove indirection in dynamic set infrastructure, also from Florian.
12) Consolidate pipapo_get/lookup, from Florian.
13) Use kvmalloc in nft_pipapop, from Florian Westphal.
14) syzbot reports slab-out-of-bounds in xt_nfacct log message,
fix from Florian Westphal.
15) Ignored tainted kernels in selftest nft_interface_stress.sh,
from Phil Sutter.
16) Fix IPVS selftest by disabling rp_filter with ipip tunnel device,
from Yi Chen.
* tag 'nf-next-25-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
selftests: netfilter: ipvs.sh: Explicity disable rp_filter on interface tunl0
selftests: netfilter: Ignore tainted kernels in interface stress test
netfilter: xt_nfacct: don't assume acct name is null-terminated
netfilter: nft_set_pipapo: prefer kvmalloc for scratch maps
netfilter: nft_set_pipapo: merge pipapo_get/lookup
netfilter: nft_set: remove indirection from update API call
netfilter: nft_set: remove one argument from lookup and update functions
netfilter: nft_set_pipapo: remove unused arguments
netfilter: nfnetlink_hook: Dump flowtable info
netfilter: nfnetlink: New NFNLA_HOOK_INFO_DESC helper
ipvs: Rename del_timer in comment in ip_vs_conn_expire_now()
selftests: netfilter: Enable CONFIG_INET_SCTP_DIAG
selftests: net: Enable legacy netfilter legacy options.
netfilter: Exclude LEGACY TABLES on PREEMPT_RT.
netfilter: conntrack: Remove unused net in nf_conntrack_double_lock()
netfilter: nf_tables: Remove unused nft_reduce_is_readonly()
netfilter: x_tables: Remove unused functions xt_{in|out}name()
netfilter: load nf_log_syslog on enabling nf_conntrack_log_invalid
netfilter: conntrack: table full detailed log
====================
Link: https://patch.msgid.link/20250725170340.21327-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is currently impossible to enable ipv6 forwarding on a per-interface
basis like in ipv4. To enable forwarding on an ipv6 interface we need to
enable it on all interfaces and disable it on the other interfaces using
a netfilter rule. This is especially cumbersome if you have lots of
interfaces and only want to enable forwarding on a few. According to the
sysctl docs [0] the `net.ipv6.conf.all.forwarding` enables forwarding
for all interfaces, while the interface-specific
`net.ipv6.conf.<interface>.forwarding` configures the interface
Host/Router configuration.
Introduce a new sysctl flag `force_forwarding`, which can be set on every
interface. The ip6_forwarding function will then check if the global
forwarding flag OR the force_forwarding flag is active and forward the
packet.
To preserve backwards-compatibility reset the flag (on all interfaces)
to 0 if the net.ipv6.conf.all.forwarding flag is set to 0.
Add a short selftest that checks if a packet gets forwarded with and
without `force_forwarding`.
[0]: https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Gabriel Goller <g.goller@proxmox.com>
Link: https://patch.msgid.link/20250722081847.132632-1-g.goller@proxmox.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce NFNL_HOOK_TYPE_NFT_FLOWTABLE to distinguish flowtable hooks
from base chain ones. Nested attributes are shared with the old NFTABLES
hook info type since they fit apart from their misleading name.
Old nftables in user space will ignore this new hook type and thus
continue to print flowtable hooks just like before, e.g.:
| family netdev {
| hook ingress device test0 {
| 0000000000 nf_flow_offload_ip_hook [nf_flow_table]
| }
| }
With this patch in place and support for the new hook info type, output
becomes more useful:
| family netdev {
| hook ingress device test0 {
| 0000000000 flowtable ip mytable myft [nf_flow_table]
| }
| }
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The NPU cores have their own access to the memory bus, and this isn't
cache coherent with the CPUs.
Add IOCTLs so userspace can mark when the caches need to be flushed, and
also when a writer job needs to be waited for before the buffer can be
accessed from the CPU.
Initially based on the same IOCTLs from the Etnaviv driver.
v2:
- Don't break UABI by reordering the IOCTL IDs (Jeff Hugo)
v3:
- Check that padding fields in IOCTLs are zero (Jeff Hugo)
v6:
- Fix conversion logic to make sure we use DMA_BIDIRECTIONAL when needed
(Lucas Stach)
v8:
- Always sync BOs in both directions (Robin Murphy)
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250721-6-10-rocket-v9-5-77ebd484941e@tomeuvizoso.net
Using the DRM GPU scheduler infrastructure, with a scheduler for each
core.
Userspace can decide for a series of tasks to be executed sequentially
in the same core, so SRAM locality can be taken advantage of.
The job submission code was initially based on Panfrost.
v2:
- Remove hardcoded number of cores
- Misc. style fixes (Jeffrey Hugo)
- Repack IOCTL struct (Jeffrey Hugo)
v3:
- Adapt to a split of the register block in the DT bindings (Nicolas
Frattaroli)
- Make use of GPL-2.0-only for the copyright notice (Jeff Hugo)
- Use drm_* logging functions (Thomas Zimmermann)
- Rename reg i/o macros (Thomas Zimmermann)
- Add padding to ioctls and check for zero (Jeff Hugo)
- Improve error handling (Nicolas Frattaroli)
v6:
- Use mutexes guard (Markus Elfring)
- Use u64_to_user_ptr (Jeff Hugo)
- Drop rocket_fence (Rob Herring)
v7:
- Assign its own IOMMU domain to each client, for isolation (Daniel
Stone and Robin Murphy)
v8:
- Use reset lines to reset the cores (Robin Murphy)
- Use the macros to compute the values for the bitfields (Robin Murphy)
- More descriptive name for the IRQ (Robin Murphy)
- Simplify job interrupt handing (Robin Murphy)
- Correctly acquire a reference to the IOMMU (Robin Murphy)
- Specify the size of the embedded structs in the IOCTLs for future
extensibility (Rob Herring)
- Expose only 32 bits for the address of the regcmd BO (Robin Murphy)
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250721-6-10-rocket-v9-4-77ebd484941e@tomeuvizoso.net
This uses the SHMEM DRM helpers and we map right away to the CPU and NPU
sides, as all buffers are expected to be accessed from both.
v2:
- Sync the IOMMUs for the other cores when mapping and unmapping.
v3:
- Make use of GPL-2.0-only for the copyright notice (Jeff Hugo)
v6:
- Use mutexes guard (Markus Elfring)
v7:
- Assign its own IOMMU domain to each client, for isolation (Daniel
Stone and Robin Murphy)
v8:
- Correctly acquire a reference to the IOMMU (Robin Murphy)
- Allocate DMA address ourselves with drm_mm (Robin Murphy)
- Use refcount_read (Heiko Stuebner)
- Remove superfluous dma_sync_sgtable_for_device (Robin Murphy)
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250721-6-10-rocket-v9-3-77ebd484941e@tomeuvizoso.net
Instead of using '0' and '1' for napi threaded state use an enum with
'disabled' and 'enabled' states.
Tested:
./tools/testing/selftests/net/nl_netdev.py
TAP version 13
1..7
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
ok 4 nl_netdev.napi_list_check
ok 5 nl_netdev.dev_set_threaded
ok 6 nl_netdev.napi_set_threaded
ok 7 nl_netdev.nsim_rxq_reset_down
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://patch.msgid.link/20250723013031.2911384-4-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Johannes Berg says:
====================
Another wireless update:
- rtw89:
- STA+P2P concurrency
- support for USB devices RTL8851BU/RTL8852BU
- ath9k: OF support
- ath12k:
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- iwlwifi: some FIPS interoperability
- brcm80211: support SDIO 43751 device
- rt2x00: better DT/OF support
- cfg80211/mac80211:
- improved S1G support
- beacon monitor for MLO
* tag 'wireless-next-2025-07-24' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (199 commits)
ssb: use new GPIO line value setter callbacks for the second GPIO chip
wifi: Fix typos
wifi: brcmsmac: Use str_true_false() helper
wifi: brcmfmac: fix EXTSAE WPA3 connection failure due to AUTH TX failure
wifi: brcm80211: Remove yet more unused functions
wifi: brcm80211: Remove more unused functions
wifi: brcm80211: Remove unused functions
wifi: iwlwifi: Revert "wifi: iwlwifi: remove support of several iwl_ppag_table_cmd versions"
wifi: iwlwifi: check validity of the FW API range
wifi: iwlwifi: don't export symbols that we shouldn't
wifi: iwlwifi: mld: use spec link id and not FW link id
wifi: iwlwifi: mld: decode EOF bit for AMPDUs
wifi: iwlwifi: Remove support for rx OMI bandwidth reduction
wifi: iwlwifi: stop supporting iwl_omi_send_status_notif ver 1
wifi: iwlwifi: remove SC2F firmware support
wifi: iwlwifi: mvm: Remove NAN support
wifi: iwlwifi: mld: avoid outdated reorder buffer head_sn
wifi: iwlwifi: mvm: avoid outdated reorder buffer head_sn
wifi: iwlwifi: disable certain features for fips_enabled
wifi: iwlwifi: mld: support channel survey collection for ACS scans
...
====================
Link: https://patch.msgid.link/20250724100349.21564-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add doorbell support with the help of three new registers:
PCIE_ENDPOINT_TEST_DB_BAR, PCIE_ENDPOINT_TEST_DB_ADDR, and
PCIE_ENDPOINT_TEST_DB_DATA.
The testcase works by triggering the doorbell in Endpoint by writing the
value from PCI_ENDPOINT_TEST_DB_DATA register to the address provided by
PCI_ENDPOINT_TEST_DB_OFFSET register of the BAR indicated by the
PCIE_ENDPOINT_TEST_DB_BAR register and waiting for the completion status
from the Endpoint.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[mani: removed one spurious change and reworded the commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20250710-ep-msi-v21-7-57683fc7fb25@nxp.com
The configuration and statistics dump of the DualPI2 Qdisc provides
information related to both queues, such as packet numbers and queuing
delays in the L-queue and C-queue, as well as general information such as
probability value, WRR credits, memory usage, packet marking counters, max
queue size, etc.
The following patch includes enqueue/dequeue for DualPI2.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Link: https://patch.msgid.link/20250722095915.24485-3-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DualPI2 is the reference implementation of IETF RFC9332 DualQ Coupled
AQM (https://datatracker.ietf.org/doc/html/rfc9332) providing two
queues called low latency (L-queue) and classic (C-queue). By default,
it enqueues non-ECN and ECT(0) packets into the C-queue and ECT(1) and
CE packets into the low latency queue (L-queue), as per IETF RFC9332 spec.
This patch defines the dualpi2 Qdisc structure and parsing, and the
following two patches include dumping and enqueue/dequeue for the DualPI2.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Link: https://patch.msgid.link/20250722095915.24485-2-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce a new DMA handle (DMAH) object along with its corresponding
allocation and deallocation APIs.
This DMAH object encapsulates attributes intended for use in DMA
transactions.
While its initial purpose is to support TPH functionality, it is
designed to be extensible for future features such as DMA PCI multipath,
PCI UIO configurations, PCI traffic class selection, and more.
Further details:
----------------
We ensure that a caller requesting a DMA handle for a specific CPU ID is
permitted to be scheduled on it. This prevent a potential security issue
where a non privilege user may trigger DMA operations toward a CPU that
it's not allowed to run on.
We manage reference counting for the DMAH object and its consumers
(e.g., memory regions) as will be detailed in subsequent patches in the
series.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/2cad097e849597e49d6b61e6865dba878257f371.1752752567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
This new method enables us to use a single ioctl from user space which
supports the below variants of reg_mr [1].
The method will be extended in the next patches from the series with an
extra attribute to let us pass DMA handle to be used as part of the
registration.
[1] ibv_reg_mr(), ibv_reg_mr_iova(), ibv_reg_mr_iova2(),
ibv_reg_dmabuf_mr().
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/5a3822ceef084efe967c9752e89c58d8250337c7.1752752567.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Implement removing additional RSS contexts via Netlink.
Technically it'd be possible to shoehorn the delete operation
into ethnl_request_ops-compatible handler. The code ends
up longer than open coded version, and I think we'll need
a custom way of sending notifications at some stage (if we
allow tying the context lifetime to the netlink socket, in
the future).
Link: https://patch.msgid.link/20250717234343.2328602-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support creating contexts via Netlink. Setting flow hashing
fields on the new context is not supported at this stage,
it can be added later.
An empty indirection table is not supported. This is a carry
over from the IOCTL interface where empty indirection table
meant delete. We can repurpose empty indirection table in
Netlink but for now to avoid confusion reject it using the
policy.
Support letting user choose the ID for the new context. This was
not possible in IOCTL since the context ID field for the create
action had to be set to the ETH_RXFH_CONTEXT_ALLOC magic value.
Link: https://patch.msgid.link/20250717234343.2328602-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the defrag ioctl cannot rewrite the extents without
compression. Add a new flag for that, as setting compression to 0 (or
"no compression") means to do no changes to compression so take what is
the current default, like mount options or properties.
The defrag setting overrides mount or properties. The compression
BTRFS_DEFRAG_DONT_COMPRESS is only used for in-memory operations and
does not need to have a fixed value.
Mount with zstd:9, copy test file from /usr/bin/ (about 260KB):
$ mount -o compress=zstd:9 /dev/vda /mnt
$ filefrag -vsb testfile
filefrag: -b needs a blocksize option, assuming 1024-byte blocks.
Filesystem type is: 9123683e
File size of testfile is 297704 (292 blocks of 1024 bytes)
ext: logical_offset: physical_offset: length: expected: flags:
0: 0.. 127: 13312.. 13439: 128: encoded
1: 128.. 255: 13364.. 13491: 128: 13440: encoded
2: 256.. 291: 13424.. 13459: 36: 13492: last,encoded,eof
testfile: 3 extents found
$ compsize testfile
Processed 1 file, 3 regular extents (3 refs), 0 inline, 1 fragments.
Type Perc Disk Usage Uncompressed Referenced
TOTAL 42% 124K 292K 292K
zstd 42% 124K 292K 292K
Defrag to uncompressed:
$ btrfs fi defrag --nocomp testfile
$ filefrag -vsb testfile
filefrag: -b needs a blocksize option, assuming 1024-byte blocks.
Filesystem type is: 9123683e
File size of testfile is 297704 (292 blocks of 1024 bytes)
ext: logical_offset: physical_offset: length: expected: flags:
0: 0.. 291: 291840.. 292131: 292: last,eof
testfile: 1 extent found
$ compsize testfile
Processed 1 file, 1 regular extents (1 refs), 0 inline, 1 fragments.
Type Perc Disk Usage Uncompressed Referenced
TOTAL 100% 292K 292K 292K
none 100% 292K 292K 292K
Compress again with LZO:
$ btrfs fi defrag -clzo testfile
$ filefrag -vsb testfile
filefrag: -b needs a blocksize option, assuming 1024-byte blocks.
Filesystem type is: 9123683e
File size of testfile is 297704 (292 blocks of 1024 bytes)
ext: logical_offset: physical_offset: length: expected: flags:
0: 0.. 127: 13312.. 13439: 128: encoded
1: 128.. 255: 13392.. 13519: 128: 13440: encoded
2: 256.. 291: 13480.. 13515: 36: 13520: last,encoded,eof
testfile: 3 extents found
$ compsize testfile
Processed 1 file, 3 regular extents (3 refs), 0 inline, 1 fragments.
Type Perc Disk Usage Uncompressed Referenced
TOTAL 64% 188K 292K 292K
lzo 64% 188K 292K 292K
Signed-off-by: David Sterba <dsterba@suse.com>
Destroy iommufd_vdevice (vdev) on iommufd_idevice (idev) destruction so
that vdev can't outlive idev.
idev represents the physical device bound to iommufd, while the vdev
represents the virtual instance of the physical device in the VM. The
lifecycle of the vdev should not be longer than idev. This doesn't
cause real problem on existing use cases cause vdev doesn't impact the
physical device, only provides virtualization information. But to
extend vdev for Confidential Computing (CC), there are needs to do
secure configuration for the vdev, e.g. TSM Bind/Unbind. These
configurations should be rolled back on idev destroy, or the external
driver (VFIO) functionality may be impact.
The idev is created by external driver so its destruction can't fail.
The idev implements pre_destroy() op to actively remove its associated
vdev before destroying itself. There are 3 cases on idev pre_destroy():
1. vdev is already destroyed by userspace. No extra handling needed.
2. vdev is still alive. Use iommufd_object_tombstone_user() to
destroy vdev and tombstone the vdev ID.
3. vdev is being destroyed by userspace. The vdev ID is already
freed, but vdev destroy handler is not completed. This requires
multi-threads syncing - vdev holds idev's short term users
reference until vdev destruction completes, idev leverages
existing wait_shortterm mechanism for syncing.
idev should also block any new reference to it after pre_destroy(),
or the following wait shortterm would timeout. Introduce a 'destroying'
flag, set it to true on idev pre_destroy(). Any attempt to reference
idev should honor this flag under the protection of
idev->igroup->lock.
Link: https://patch.msgid.link/r/20250716070349.1807226-5-yilun.xu@linux.intel.com
Originally-by: Nicolin Chen <nicolinc@nvidia.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Co-developed-by: "Aneesh Kumar K.V (Arm)" <aneesh.kumar@kernel.org>
Signed-off-by: "Aneesh Kumar K.V (Arm)" <aneesh.kumar@kernel.org>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
S1G short beacons are an optional frame type used in an S1G BSS
that contain a limited set of elements. While they are optional,
they are a fundamental part of S1G that enables significant
power saving.
Expose 2 additional netlink attributes,
NL80211_ATTR_S1G_LONG_BEACON_PERIOD which denotes the number of beacon
intervals between each long beacon and NL80211_ATTR_S1G_SHORT_BEACON
which is a nested attribute containing the short beacon tail and
head. We split them as the long beacon period cannot be updated,
and is only used when initialisng the interface, whereas the short
beacon data can be used to both initialise and update the templates.
This follows how things such as the beacon interval and DTIM period
currently operate.
During the initialisation path, we ensure we have the long beacon
period if the short beacon data is being passed down, whereas
the update path will simply update the template if its sent down.
The short beacon data is validated using the same routines for regular
beacons as they support correctly parsing the short beacon format
while ensuring the frame is well-formed.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250717074205.312577-2-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
CRIU restore of drm buffer objects requires the ability to create
or import a buffer object with a specific gem handle.
Add new drm ioctl DRM_IOCTL_GEM_CHANGE_HANDLE, which takes
the gem handle of an object and moves that object to a
specified new gem handle.
This ioctl needs to call drm_prime_remove_buf_handle,
but that function acquires the prime lock, which the ioctl
needs to hold for other purposes.
Make drm_prime_remove_buf_handle not acquire the prime lock,
and change its other caller to reflect this.
The rest of the kernel patches required to enable CRIU can be
found at
https://lore.kernel.org/dri-devel/20250617194536.538681-1-David.Francis@amd.com/
v2 - Move documentation to UAPI headers
v3 - Always return 0 on success
Signed-off-by: David Francis <David.Francis@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250717143556.857893-2-David.Francis@amd.com
Add initial support for RSS_SET, for now only operations on
the indirection table are supported.
Unlike the ioctl don't check if at least one parameter is
being changed. This is how other ethtool-nl ops behave,
so pick the ethtool-nl consistency vs copying ioctl behavior.
There are two special cases here:
1) resetting the table to defaults;
2) support for tables of different size.
For (1) I use an empty Netlink attribute (array of size 0).
(2) may require some background. AFAICT a lot of modern devices
allow allocating RSS tables of different sizes. mlx5 can upsize
its tables, bnxt has some "table size calculation", and Intel
folks asked about RSS table sizing in context of resource allocation
in the past. The ethtool IOCTL API has a concept of table size,
but right now the user is expected to provide a table exactly
the size the device requests. Some drivers may change the table
size at runtime (in response to queue count changes) but the
user is not in control of this. What's not great is that all
RSS contexts share the same table size. For example a device
with 128 queues enabled, 16 RSS contexts 8 queues in each will
likely have 256 entry tables for each of the 16 contexts,
while 32 would be more than enough given each context only has
8 queues. To address this the Netlink API should avoid enforcing
table size at the uAPI level, and should allow the user to express
the min table size they expect.
To fully solve (2) we will need more driver plumbing but
at the uAPI level this patch allows the user to specify
a table size smaller than what the device advertises. The device
table size must be a multiple of the user requested table size.
We then replicate the user-provided table to fill the full device
size table. This addresses the "allow the user to express the min
table size" objective, while not enforcing any fixed size.
From Netlink perspective .get_rxfh_indir_size() is now de facto
the "max" table size supported by the device.
We may choose to support table replication in ethtool, too,
when we actually plumb this thru the device APIs.
Initially I was considering moving full pattern generation
to the kernel (which queues to use, at which frequency and
what min sequence length). I don't think this complexity
would buy us much and most if not all devices have pow-2
table sizes, which simplifies the replication a lot.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250716000331.1378807-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's not obvious off-hand which CRTCs will get a page-flip event
when using this flag in an atomic commit, because it's all
implicitly implied based on the contents of the atomic commit.
Document requirements for using this flag and how to request an
event for a CRTC.
Note, because prepare_signaling() runs right after
drm_atomic_set_property() calls, page-flip events are not delivered
for CRTCs pulled in later by DRM core (e.g. on modeset by
drm_atomic_helper_check_modeset()) or the driver (e.g. other CRTCs
sharing a DP-MST connector).
v2: fix cut off sentence in commit message (Pekka)
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Simona Vetter <simona@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Cc: David Turner <david.turner@raspberrypi.com>
Cc: Daniel Stone <daniel@fooishbar.org>
Link: https://lore.kernel.org/r/20250501112945.6448-1-contact@emersion.fr
The GL extension KHR_robustness uses the number of global and per-context
GPU resets to learn about graphics resets that affect a GL context. This
commit introduces a new V3D parameter to retrieve the number of GPU resets
triggered by jobs submitted through a file descriptor.
To retrieve this information, user-space must use DRM_V3D_PARAM_CONTEXT_RESET_COUNTER.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://lore.kernel.org/r/20250711-v3d-reset-counter-v1-2-1ac73e9fca2d@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
The GL extension KHR_robustness uses the number of global and per-context
GPU resets to learn about graphics resets that affect a GL context. This
commit introduces a new V3D parameter to retrieve the global number of
GPU resets that have happened since the driver was probed.
To retrieve this information, user-space must use DRM_V3D_PARAM_GLOBAL_RESET_COUNTER.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://lore.kernel.org/r/20250711-v3d-reset-counter-v1-1-1ac73e9fca2d@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
The 'commit 35f96de041 ("bpf: Introduce BPF token object")' added
BPF token as a new kind of BPF kernel object. And BPF_OBJ_GET_INFO_BY_FD
already used to get BPF object info, so we can also get token info with
this cmd.
One usage scenario, when program runs failed with token, because of
the permission failure, we can report what BPF token is allowing with
this API for debugging.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Tao Chen <chen.dylane@linux.dev>
Link: https://lore.kernel.org/r/20250716134654.1162635-1-chen.dylane@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The term "HQD" is CP-specific and doesn't
accurately describe the queue resources for other IP blocks like SDMA,
VCN, or VPE. This change:
1. Renames `num_hqds` to `num_slots` in amdgpu_kms.c to better reflect
the generic nature of the resource counting
2. Updates the UAPI struct member from `userq_num_hqds` to `userq_num_slots`
3. Maintains the same functionality while using more appropriate terminology
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This change exposes the number of available user queue instances
for each hardware IP type (GFX, COMPUTE, SDMA) through the
drm_amdgpu_info_hw_ip interface.
Key changes:
1. Added userq_num_instance field to drm_amdgpu_info_hw_ip structure
2. Implemented counting of available HQD slots using:
- mes.gfx_hqd_mask for GFX queues
- mes.compute_hqd_mask for COMPUTE queues
- mes.sdma_hqd_mask for SDMA queues
3. Only counts available instances when user queues are enabled
(!disable_uq)
v2: using the adev->mes.gfx_hqd_mask[]/compute_hqd_mask[]/sdma_hqd_mask[] masks
to determine the number of queue slots available for each engine type (Alex)
v3: rename userq_num_instance to userq_num_hqds (Alex)
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A net device has a threaded sysctl that can be used to enable threaded
NAPI polling on all of the NAPI contexts under that device. Allow
enabling threaded NAPI polling at individual NAPI level using netlink.
Extend the netlink operation `napi-set` and allow setting the threaded
attribute of a NAPI. This will enable the threaded polling on a NAPI
context.
Add a test in `nl_netdev.py` that verifies various cases of threaded
NAPI being set at NAPI and at device level.
Tested
./tools/testing/selftests/net/nl_netdev.py
TAP version 13
1..7
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
ok 4 nl_netdev.napi_list_check
ok 5 nl_netdev.dev_set_threaded
ok 6 nl_netdev.napi_set_threaded
ok 7 nl_netdev.nsim_rxq_reset_down
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250710211203.3979655-1-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 465b9ee0ee.
Such notifications fit better into core or nfnetlink_hook code,
following the NFNL_MSG_HOOK_GET message format.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Merge series from Peng Fan <peng.fan@nxp.com>:
This patchset is a pick up of patch 1,2 from [1]. And I also collect
Linus's R-b for patch 2. After this patchset, there is only one user of
of_gpio.h left in sound driver(pxa2xx-ac97).
of_gpio.h is deprecated, update the driver to use GPIO descriptors.
Patch 1 is to drop legacy platform data which in-tree no users are using it
Patch 2 is to convert to GPIO descriptors
Checking the DTS that use the device, all are using GPIOD_ACTIVE_LOW
polarity for reset-gpios, so all should work as expected with this patch.
[1] https://lore.kernel.org/all/20250408-asoc-gpio-v1-0-c0db9d3fd6e9@nxp.com/
Add an option to create CQ using external memory instead of allocating
in the driver. The memory can be passed from userspace by dmabuf fd and
an offset or a VA. One of the possible usages is creating CQs that
reside in accelerator memory, allowing low latency asynchronous direct
polling from the accelerator device. Add a capability bit to reflect on
the feature support.
Reviewed-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Yonatan Nachum <ynachum@amazon.com>
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Link: https://patch.msgid.link/20250708202308.24783-4-mrgolin@amazon.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add ioctl command attributes and a common handling for the option to
create CQs with memory buffers passed from userspace. When required
attributes are supplied, create umem and provide it for driver's use.
The extension enables creation of CQs on top of preallocated CPU
virtual or device memory buffers, by supplying VA or dmabuf fd, in a
common way.
Drivers can support this flow by initializing a new create_cq_umem fp
field in their ops struct, with a function that can handle the new
parameter.
Signed-off-by: Michael Margolin <mrgolin@amazon.com>
Link: https://patch.msgid.link/20250708202308.24783-2-mrgolin@amazon.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
