mirrors/linux
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2026-04-28 00:48:07 -04:00
Code Issues Packages Projects Releases Wiki Activity
1,153,639 Commits 1 Branch 928 Tags
bf37b5bc72204a69636c26bb8cd90cfc70ca8056
Commit Graph

1153639 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Krzysztof Kozlowski
bf37b5bc72 arm64: dts: qcom: sc7280-idp: add amp pin config function 
Bindings expect each pin config to come with a "function" property:

  sc7280-crd-r3.dtb: pinctrl@f100000: amp-en-state: 'oneOf' conditional failed, one must be fixed:
    'function' is a required property
    'bias-pull-down', 'drive-strength', 'pins' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221230135645.56401-9-krzysztof.kozlowski@linaro.org
 2023-01-18 17:08:56 -06:00
Krzysztof Kozlowski
de385ae2aa arm64: dts: qcom: msm8916-samsung-a2015: correct motor pinctrl node name 
Correct typo in motor pinctrl node name:

  msm8916-samsung-a5u-eur.dtb: pinctrl@1000000: 'motor-en-default-stae' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221230135645.56401-8-krzysztof.kozlowski@linaro.org
 2023-01-18 17:08:56 -06:00
Petr Vorel
4dee5aa44b arm64: dts: qcom: msm8992-bullhead: Disable dfps_data_mem 
It's disabled on downstream [1] thus not shown on downstream dmesg.

Removing it fixes warnings on v6.1:

[    0.000000] OF: reserved mem: OVERLAP DETECTED!
[    0.000000] dfps_data_mem@3400000 (0x0000000003400000--0x0000000003401000) overlaps with memory@3400000 (0x0000000003400000--0x0000000004600000)

[1] https://android.googlesource.com/kernel/msm.git/+/android-7.0.0_r0.17/arch/arm64/boot/dts/lge/msm8992-bullhead.dtsi#137

Fixes: 976d321f32 ("arm64: dts: qcom: msm8992: Make the DT an overlay on top of 8994")

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221226185440.440968-3-pevik@seznam.cz
 2023-01-18 17:07:17 -06:00
Petr Vorel
26a91359ae arm64: dts: qcom: msm8992-bullhead: Fix cont_splash_mem size 
Original google firmware reports 12 MiB:
[    0.000000] cma: Found cont_splash_mem@0, memory base 0x0000000003400000, size 12 MiB, limit 0xffffffffffffffff

which is actually 12*1024*1024 = 0xc00000.

This matches the aosp source [1]:
&cont_splash_mem {
	reg = <0 0x03400000 0 0xc00000>;
};

Fixes: 3cb6a271f4 ("arm64: dts: qcom: msm8992-bullhead: Fix cont_splash_mem mapping")
Fixes: 976d321f32 ("arm64: dts: qcom: msm8992: Make the DT an overlay on top of 8994")

[1] https://android.googlesource.com/kernel/msm.git/+/android-7.0.0_r0.17/arch/arm64/boot/dts/lge/msm8992-bullhead.dtsi#141

Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221226185440.440968-2-pevik@seznam.cz
 2023-01-18 17:07:17 -06:00
Bjorn Andersson
1ccad21aa9 Merge tag 'qcom-arm64-fixes-for-6.2' into arm64-for-6.3 
Qualcomm ARM64 DTS fixes for 6.2

The cluster idle issue was resolved on SM8250, so the change disabling
the cluster state is being reverted.

Issues where identified with the QMP PHY binding, that would prevent
enablement of Displayport and it was decided not to support the old
binding for the recently introduced SC8280XP, which broke USB. This
adjusts the USB PHY nodes to the new binding. The reset signal for the
first QMP PHY is corrected as well.

The reserved memory map is updated on Xiaomi Mi 4C and Huawei Nexus 6P,
to avoid instabilities caused by use of protected memory regions.
The compatible for the MSM8992 TCSR mutex is corrected as well.

Lastly SDHCI interconnects on SM8350 are corrected to match the
providers #interconnect-cells.
 2023-01-18 16:59:11 -06:00
Robert Foss
4f287e31ff arm64: dts: qcom: sm8350: Use 2 interconnect cells 
Use two interconnect cells in order to optionally
support a path tag.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117115712.1054613-1-rfoss@kernel.org
 2023-01-18 16:54:24 -06:00
Robert Foss
638b7ada91 arm64: dts: qcom: sm8350: Add &tlmm gpio-line-names 
Add GPIO line names as described by the sm8350-hdk schematic.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117112537.1016250-1-rfoss@kernel.org
 2023-01-18 16:52:03 -06:00
Bjorn Andersson
5f84c7c35d arm64: dts: qcom: sc8280xp: Define CMA region for CRD and X13s 
While booting the CRD, a series of CMA allocation errors can be seen in
the kernel log:

  cma: cma_alloc: reserved: alloc failed, req-size: 128 pages, ret: -12

Growing the CMA region and querying /proc/meminfo indicates that a newly
booted system (currently) uses 64MB CMA.

Define a memory region sufficiently large for the current use cases, to
avoid forcing users to add this themselves, through command line
parameters etc.

While fixing the CRD define the same region for the X13s.

Tested-by: Andrew Halaney <ahalaney@redhat.com> # sc8280xp-lenovo-thinkpad-x13s
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117184630.2775905-1-quic_bjorande@quicinc.com
 2023-01-18 16:19:56 -06:00
Judy Hsiao
fc1780dba4 arm64: dts: qcom: sc7280: add DP audio to herobrine rt5682 1-mic dtsi 
1. Add DisplayPort sound node and lpass_cpu node.

2. Adjust the dai-link order to make the order to
   be consistent with sc7280-herobrine-audio-rt5682-3mic.dtsi.

Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230118011853.1614566-1-judyhsiao@chromium.org
 2023-01-18 16:19:47 -06:00
Johan Hovold
74d6ed033d arm64: dts: qcom: sm8250: clean up wcd938x codec node 
Clean up the wcd938x codec node somewhat by adding newline separators,
reordering properties and renaming it 'audio-codec'.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103103141.15807-7-johan+linaro@kernel.org
 2023-01-18 16:14:10 -06:00
Johan Hovold
306380dc93 arm64: dts: qcom: sm8450-hdk: move wcd938x codec node 
The wcd938x codec is not a memory-mapped device and does not belong
under the soc node.

Move the node to the root node to avoid DT validation failures.

While at it, clean up the node somewhat by reordering properties and
renaming it 'audio-codec'.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103103141.15807-6-johan+linaro@kernel.org
 2023-01-18 16:14:10 -06:00
Johan Hovold
fdc6a0b272 arm64: dts: qcom: sc8280xp-x13s: move wcd938x codec node 
The wcd938x codec is not a memory-mapped device and does not belong
under the soc node.

Move the node to the root node to avoid DT validation failures.

While at it, clean up the node somewhat by adding newline separators,
reordering properties and renaming it 'audio-codec'.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103103141.15807-5-johan+linaro@kernel.org
 2023-01-18 16:14:10 -06:00
Johan Hovold
acf9061407 arm64: dts: qcom: sc8280xp-x13s: move vamacro node 
Move the vamacro node to restore the alphabetical sort order.

While at it, add some newline separators to improve readability.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103103141.15807-3-johan+linaro@kernel.org
 2023-01-18 16:12:20 -06:00
Johan Hovold
6ded5ed609 arm64: dts: qcom: sc8280xp: disable sound nodes 
The sound nodes in the SoC dtsi should be disabled by default.

Note that the lpass-tlmm and macro blocks depend on having the board dts
enable the adsp and specifying an appropriate firmware to enable the
q6prm clock controller.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230103103141.15807-2-johan+linaro@kernel.org
 2023-01-18 16:12:20 -06:00
Krzysztof Kozlowski
91238d52fb arm64: dts: qcom: sc8280xp: drop unused properties from tx-macro 
tx-macro does not have children and does not allow address/size cells:

  sc8280xp-crd.dtb: txmacro@3220000: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230118094224.51704-3-krzysztof.kozlowski@linaro.org
 2023-01-18 11:42:14 -06:00
Krzysztof Kozlowski
c75286fe89 arm64: dts: qcom: sc8280xp: drop bogus clock-controller property 
There is no "clock-controller" property:

  sa8295p-adp.dtb: service@2: clock-controller: 'clock-controller' does not match any of the regexes: 'pinctrl-[0-9]+'
    From schema: Documentation/devicetree/bindings/sound/qcom,q6prm.yaml

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230118094224.51704-2-krzysztof.kozlowski@linaro.org
 2023-01-18 11:42:14 -06:00
Krzysztof Kozlowski
30186f8573 arm64: dts: qcom: sm8250: drop unused clock-frequency from rx-macro 
Neither qcom,sm8250-lpass-rx-macro bindings nor the driver use
"clock-frequency" property.

  sm8250-mtp.dtb: rxmacro@3200000: Unevaluated properties are not allowed ('clock-frequency' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230118094224.51704-1-krzysztof.kozlowski@linaro.org
 2023-01-18 11:42:14 -06:00
Yunlong Jia
c326e851ee arm64: dts: qcom: sc7180: set ath10k output power calibration string 
Add the string to load RF output power table for pazquel360 project.

Signed-off-by: Yunlong Jia <ecs.beijing2022@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117085212.1.If242b1cd61b2e87e312dd9cf81e20301bae2a5a4@changeid
 2023-01-17 14:39:32 -06:00
Bhupesh Sharma
bbcb07d299 arm64: dts: qcom: sm6115: Add debug related nodes 
Add dtsi nodes related to coresight debug units such
as cti, etm, etr, funnel(s), replicator(s), etc. for
Qualcomm sm6115 SoC.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230116164032.551223-1-bhupesh.sharma@linaro.org
 2023-01-17 11:23:33 -06:00
Robert Foss
d96d8f9192 arm64: dts: qcom: sm8350-hdk: Enable lt9611uxc dsi-hdmi bridge 
The sm8350-hdk ships with the LT9611 UXC DSI/HDMI bridge chip.

In order to toggle the board to enable the HDMI output,
switch #7 & #8 on the rightmost multi-switch package have
to be toggled to On.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117120223.1055225-4-rfoss@kernel.org
 2023-01-17 11:23:29 -06:00
Robert Foss
ea9df63f0f arm64: dts: qcom: sm8350-hdk: Enable display & dsi nodes 
Enable the display subsystem and the dsi0 output for
the sm8350-hdk board.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117120223.1055225-3-rfoss@kernel.org
 2023-01-17 11:23:29 -06:00
Robert Foss
d4a4410583 arm64: dts: qcom: sm8350: Add display system nodes 
Add mdss, mdss_mdp, dsi0, dsi0_phy nodes. With these
nodes the display subsystem is configured to support
one DSI output.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230117120223.1055225-2-rfoss@kernel.org
 2023-01-17 11:23:29 -06:00
Abel Vesa
6fa1a0f8cb arm64: dts: qcom: sm8550-mtp: Add UFS host controller and PHY node 
Enable UFS host controller and PHY node on SM8550 MTP board.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230116141000.1831351-2-abel.vesa@linaro.org
 2023-01-17 11:23:29 -06:00
Abel Vesa
35cf1aaab1 arm64: dts: qcom: sm8550: Add UFS host controller and phy nodes 
Add UFS host controller and PHY nodes.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230116141000.1831351-1-abel.vesa@linaro.org
 2023-01-17 11:23:29 -06:00
Konrad Dybcio
2f20f276dd arm64: dts: qcom: sdm630-nile: Reserve simplefb memory 
Reserve the bit of memory that simplefb uses to ensure it can always
probe.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230116141451.470158-2-konrad.dybcio@linaro.org
 2023-01-17 11:23:29 -06:00
Konrad Dybcio
305db81657 arm64: dts: qcom: sdm630-nile: Don't use underscores in node names 
Rename the reserved-memory subnodes such that they don't use
undescores.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230116141451.470158-1-konrad.dybcio@linaro.org
 2023-01-17 11:23:29 -06:00
Kuogee Hsieh
26c5aa54f5 arm64: dts: qcom: add data-lanes and link-freuencies into dp_out endpoint 
Move data-lanes property from mdss_dp node to dp_out endpoint. Also
add link-frequencies property into dp_out endpoint as well. The last
frequency specified at link-frequencies will be the max link rate
supported by DP.

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1672163103-31254-2-git-send-email-quic_khsieh@quicinc.com
 2023-01-16 21:12:17 -06:00
Krzysztof Kozlowski
eef26fb45b arm64: dts: qcom: sc7180-trogdor: align DAI children names with DT schema 
Bindings expect DAI children to be named "dai-link":

  sc7180-trogdor-coachz-r1.dtb: lpass@62d87000: Unevaluated properties are not allowed ('hdmi@5', 'mi2s@0', 'mi2s@1' were unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221227163158.102737-2-krzysztof.kozlowski@linaro.org
 2023-01-16 21:11:42 -06:00
Krzysztof Kozlowski
2aa8c53eb8 arm64: dts: qcom: sm8350: drop unused dispcc power-domain-names 
Display clock controller bindings do not allow power-domain-names:

  sm8350-hdk.dtb: clock-controller@af00000: 'power-domain-names' does not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221227163158.102737-1-krzysztof.kozlowski@linaro.org
 2023-01-16 21:11:42 -06:00
Dmitry Baryshkov
86543bc6ee arm64: dts: qcom: use UFS symbol clocks provided by PHY 
Remove manually created symbol clocks and replace them with clocks
provided by PHY.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221123104443.3415267-5-dmitry.baryshkov@linaro.org
 2023-01-16 21:04:32 -06:00
Dmitry Baryshkov
186b27135a arm64: dts: qcom: sm8350-hdk: enable PCIe devices 
Enable PCIe0 and PCIe1 hosts found on SM8350 HDK board.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221118233242.2904088-9-dmitry.baryshkov@linaro.org
 2023-01-16 21:00:51 -06:00
Dmitry Baryshkov
6daee40678 arm64: dts: qcom: sm8350: add PCIe devices 
Add PCIe0 and PCIe1 (and corresponding PHY) devices found on SM8350
platform. The PCIe0 is a 1-lane Gen3 host, PCIe1 is a 2-lane Gen3 host.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221118233242.2904088-8-dmitry.baryshkov@linaro.org
 2023-01-16 21:00:51 -06:00
Bjorn Andersson
bb45bb9705 arm64: dts: qcom: sc8280xp: Use MMCX for all DP controllers 
While MDSS_GDSC is a subdomain of MMCX, Linux does not respect this
relationship and sometimes invokes sync_state on the rpmhpd (MMCX)
before the DisplayPort controller has had a chance to probe.

The result when this happens is that the power is lost to the multimedia
subsystem between the probe of msm_drv and the DisplayPort controller -
which results in an irrecoverable state.

While this is an implementation problem, this aligns the power domain
setting of the one DP instance with that of all the others.

Fixes: 57d6ef683a ("arm64: dts: qcom: sc8280xp: Define some of the display blocks")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230112135055.3836555-1-quic_bjorande@quicinc.com
 2023-01-12 10:00:38 -06:00
Johan Hovold
e15a815884 arm64: dts: qcom: sc8280xp-crd: allow vreg_l3b to be disabled 
The vreg_l3b supply is used by the eDP, UFS and USB1 PHYs which are now
described by the devicetree so that the regulator no longer needs to be
marked always-on.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230112074503.12185-1-johan+linaro@kernel.org
 2023-01-12 09:34:13 -06:00
Mukesh Ojha
1f731bbf71 arm64: dts: qcom: sm8450: Add TCSR halt register space 
Add TCSR register space and refer it from scm node, so that
it can be used by SCM driver.

Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1673513697-30173-2-git-send-email-quic_mojha@quicinc.com
 2023-01-12 09:34:05 -06:00
Bjorn Andersson
fe07640280 arm64: dts: qcom: sc8280xp: Vote for CX in USB controllers 
Running GCC_USB30_*_MASTER_CLK at 200MHz requires CX at nominal level,
not doing so results in occasional lockups. This was previously hidden
by the fact that the display stack incorrectly voted for CX (instead of
MMCX).

Fixes: 152d1faf1e ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230112135117.3836655-1-quic_bjorande@quicinc.com
 2023-01-12 09:32:04 -06:00
Dmitry Baryshkov
6af6827fb0 arm64: dts: qcom: sm8250: drop the virtual ipa-virt device 
Drop the virtual ipa-virt device. The interconnects it provided are
going to be represented as <&rpmhcc RPMH_IPA_CLK> clock.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109002935.244320-13-dmitry.baryshkov@linaro.org
 2023-01-11 14:34:13 -06:00
Dmitry Baryshkov
88efcc060e arm64: dts: qcom: sm8150: drop the virtual ipa-virt device 
Drop the virtual ipa-virt device. The interconnects it provided are
going to be represented as <&rpmhcc RPMH_IPA_CLK> clock.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230109002935.244320-12-dmitry.baryshkov@linaro.org
 2023-01-11 14:34:13 -06:00
Luca Weiss
7592ba4d3e arm64: dts: qcom: pm7250b: Add BAT_ID vadc channel 
Add a node describing the ADC5_BAT_ID_100K_PU channel with the
properties taken from downstream kernel.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230106-pm7250b-bat_id-v1-2-82ca8f2db741@fairphone.com
 2023-01-11 13:37:38 -06:00
Stephan Gerhold
389d2c9926 arm64: dts: qcom: msm8916: Add DMA for all I2C controllers 
i2c-qup allows using DMA to speed up larger transfers. In msm8916.dtsi
the DMA channels are already assigned to the SPI controllers but
missing for I2C. Add them there as well.

This also fixes confusing errors in dmesg for each I2C controller:
  i2c_qup 78b6000.i2c: tx channel not available

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230107110958.5762-3-stephan@gerhold.net
 2023-01-11 13:35:55 -06:00
Stephan Gerhold
0154d3594a arm64: dts: qcom: msm8916: Enable blsp_dma by default 
Adding the "dmas" to the I2C controllers prevents probing them if
blsp_dma is disabled (infinite probe deferral). Avoid this by enabling
blsp_dma by default - it's an integral part of the SoC that is almost
always used (even if just for UART).

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230107110958.5762-2-stephan@gerhold.net
 2023-01-11 13:35:55 -06:00
Lin, Meng-Bo
599a259a4b arm64: dts: qcom: msm8916-gplus-fl8005a: Add flash LED 
FL8005A uses Qualcomm GPIO flash LEDs which is compatible with
SGM3140 Flash LED driver. Add it to the device tree.

Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230107133235.139947-1-linmengbo0689@protonmail.com
 2023-01-11 13:35:02 -06:00
Lin, Meng-Bo
143b4b845f arm64: dts: qcom: msm8916-gplus-fl8005a: Add touchscreen 
FL8005A uses a Focaltech FT5402 touchscreen that is connected to
blsp_i2c5. Add it to the device tree.

Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230107133223.139893-1-linmengbo0689@protonmail.com
 2023-01-11 13:35:02 -06:00
Lin, Meng-Bo
662a90c4e7 arm64: dts: qcom: msm8916-gplus-fl8005a: Add initial device tree 
GPLUS FL8005A is a tablet using the MSM8916 SoC released in 2015.

Add a device tree for with initial support for:

- GPIO keys
- GPIO LEDs
- pm8916-vibrator
- SDHCI (internal and external storage)
- USB Device Mode
- UART
- WCNSS (WiFi/BT)
- Regulators

Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230107133210.139839-1-linmengbo0689@protonmail.com
 2023-01-11 13:35:01 -06:00
Dmitry Baryshkov
2e3015c2d1 arm64: dts: qcom: msm8996: mark apcs as clock provider 
Now as we added the APCS clock controller support, mark apcs device as
clock provider by adding #clock-cells property.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230111191634.2509616-1-dmitry.baryshkov@linaro.org
 2023-01-11 13:30:33 -06:00
Johan Hovold
aab961de74 arm64: dts: qcom: sa8540p-pmics: rename pmic labels 
The SA8540P PMICs are named PMM8540. Rename the devicetree source labels
to reflect this.

Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Eric Chanudet <echanude@redhat.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230111160335.7175-3-johan+linaro@kernel.org
 2023-01-11 13:13:55 -06:00
Johan Hovold
32c028fccb arm64: dts: qcom: sa8540p-pmics: add missing interrupt include 
Add the missing interrupt-controller include which is needed by the RTC
node.

Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Eric Chanudet <echanude@redhat.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230111160335.7175-2-johan+linaro@kernel.org
 2023-01-11 13:13:55 -06:00
Johan Hovold
f48c70b111 arm64: dts: qcom: sc8280xp-x13s: enable eDP display 
Enable the eDP display on MDSS0 DP3, including backlight control.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230111133128.31813-1-johan+linaro@kernel.org
 2023-01-11 13:10:22 -06:00
Bjorn Andersson
5715698507 arm64: dts: qcom: sa8295-adp: Enable DP instances 
The SA8295P ADP has, among other interfaces, six MiniDP connectors which
are connected to MDSS0 DP2 and DP3, and MDSS1 DP0 through DP3.

Enable Display Clock controllers, MDSS instanced, MDPs, DP controllers,
DP PHYs and link them all together.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230111035906.2975494-4-quic_bjorande@quicinc.com
 2023-01-11 13:09:41 -06:00
Bjorn Andersson
4a883a8d80 arm64: dts: qcom: sc8280xp-crd: Enable EDP 
The SC8280XP CRD has a EDP display on MDSS0 DP3, enable relevant nodes
and link it together with the backlight control.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230111035906.2975494-3-quic_bjorande@quicinc.com
 2023-01-11 13:09:23 -06:00