It looks that declaration of kunit_get_current_test() was
available in xe_guc_relay.c only with CONFIG_KUNIT enabled.
If CONFIG_KUNIT is disabled we fail with:
In file included from ../include/linux/build_bug.h:5,
from ../include/linux/bitfield.h:10,
from ../drivers/gpu/drm/xe/xe_guc_relay.c:6:
../drivers/gpu/drm/xe/xe_guc_relay.c: In function ‘xe_guc_relay_process_guc2vf’:
../drivers/gpu/drm/xe/xe_guc_relay.c:863:52: error: implicit declaration of function ‘kunit_get_current_test’ [-Werror=implicit-function-declaration]
863 | if (unlikely(!IS_SRIOV_VF(relay_to_xe(relay)) && !kunit_get_current_test()))
| ^~~~~~~~~~~~~~~~~~~~~~
../include/linux/compiler.h:77:42: note: in definition of macro ‘unlikely’
77 | # define unlikely(x) __builtin_expect(!!(x), 0)
| ^
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes: 811fe9f556 ("drm/xe/guc: Introduce Relay Communication for SR-IOV")
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Tested-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://lore.kernel.org/r/20240105171947.321-1-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
There are scenarios where SR-IOV Virtual Function (VF) driver will
need to get additional data that is not available over VF MMIO BAR
nor could be queried from the GuC firmware and must be obtained
from the Physical Function (PF) driver.
To allow such communication between VF and PF drivers, GuC supports
set of H2G and G2H actions which allows relaying embedded messages,
that are otherwise opaque for the GuC.
To allow use of this communication mechanism, provide functions for
sending requests and handling replies and placeholder where we will
put handlers for incoming requests.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20240104222031.277-8-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Now intel_wakeref_t is a unsigned long and Xe KMD version of those
functions should use the same type, so changing from bool to
intel_wakeref_t.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
i915 defines it as unsigned long so Xe should do the same to avoid
compilation warnings:
CC [M] drivers/gpu/drm/i915/i915_gem.o
CC [M] drivers/gpu/drm/xe/i915-display/intel_display_power_well.o
In file included from ./include/drm/drm_mm.h:51,
from drivers/gpu/drm/xe/xe_bo_types.h:11,
from drivers/gpu/drm/xe/xe_bo.h:11,
from ./drivers/gpu/drm/xe/compat-i915-headers/gem/i915_gem_object.h:11,
from ./drivers/gpu/drm/xe/compat-i915-headers/i915_drv.h:15,
from drivers/gpu/drm/i915/display/intel_display_power.c:8:
drivers/gpu/drm/i915/display/intel_display_power.c: In function ‘print_async_put_domains_state’:
drivers/gpu/drm/i915/display/intel_display_power.c:408:29: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘int’ [-Wformat=]
408 | drm_dbg(&i915->drm, "async_put_wakeref %lu\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~
409 | power_domains->async_put_wakeref);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| int
./include/drm/drm_print.h:410:39: note: in definition of macro ‘drm_dev_dbg’
410 | __drm_dev_dbg(NULL, dev, cat, fmt, ##__VA_ARGS__)
| ^~~
./include/drm/drm_print.h:510:33: note: in expansion of macro ‘drm_dbg_driver’
510 | #define drm_dbg(drm, fmt, ...) drm_dbg_driver(drm, fmt, ##__VA_ARGS__)
| ^~~~~~~~~~~~~~
drivers/gpu/drm/i915/display/intel_display_power.c:408:9: note: in expansion of macro ‘drm_dbg’
408 | drm_dbg(&i915->drm, "async_put_wakeref %lu\n",
| ^~~~~~~
drivers/gpu/drm/i915/display/intel_display_power.c:408:50: note: format string is defined here
408 | drm_dbg(&i915->drm, "async_put_wakeref %lu\n",
| ~~^
| |
| long unsigned int
| %u
CC [M] drivers/gpu/drm/i915/i915_gem_evict.o
CC [M] drivers/gpu/drm/i915/i915_gem_gtt.o
CC [M] drivers/gpu/drm/xe/i915-display/intel_display_trace.o
CC [M] drivers/gpu/drm/xe/i915-display/intel_display_wa.o
CC [M] drivers/gpu/drm/i915/i915_query.o
Fixes: 44e694958b ("drm/xe/display: Implement display support")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
We're currently sending non-blocking H2G messages using the EVENT type,
which suppresses all CTB protocol replies from the GuC, including the
failure cases. This might cause errors to slip through and manifest as
unexpected behavior (e.g. a context state might not be what the driver
thinks it is because the state change command was silently rejected by
the GuC). To avoid this kind of problems, we can use the FAST_REQUEST
type instead, which suppresses the reply only on success; this way we
still get the advantage of not having to wait for an ack from the GuC
(i.e. the H2G is still non-blocking) while still detecting errors.
Since we can't escalate to the caller when a non-blocking message
fails, we need to escalate to GT reset instead.
Note that FAST_REQUEST failures are NOT expected and are usually a sign
that the H2G was either malformed or requested an illegal operation.
v2: assign fence values to FAST_REQUEST messages, fix abi doc, use xe_gt
printers (Michal).
v3: fix doc alignment, fix and improve prints (Michal)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v2
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
The GFX doorbell solution provides a mechanism for submission of
workload to the graphics hardware by a ring3 application without
the penalty of ring transition for each workload submission.
This feature is not currently used by the Linux drivers, but in
SR-IOV mode the doorbells are treated as shared resource and the
PF driver must be able to provision exclusive range of doorbells
IDs across all enabled VFs.
Introduce simple GuC doorbell ID manager that will be used by the
PF driver for VFs provisioning and can later be used by submission
code once we are ready to switch from H2G based notifications to
doorbells mechanism.
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20231218190629.502-4-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
When interrupts are delivered using memory based mechanism, engines
will write status to the report page at the offset (in bytes) that
corresponds to their interrupt bit from the GT_INTR_DW register.
Add engine interrupt offset definitions to engine info as we will
need this to process memory based interrupts.
Bspec: 46149, 50829, 50844
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231214185955.1791-6-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
The RING_INT_SRC_RPT_PTR register points to a cacheline in memory
to which an engine must report as source of interrupt prior to
generating an interrupt to the host.
The RING_INT_STATUS_RPT_PTR register points to the first cacheline
of the Interrupt Status Report (ISR) page (4KB) in graphics memory
to which all engines report their interrupt status.
The RING_IMR register has the interrupt enables and interrupt masks
for an engine.
We will refer to these registers shortly.
Bspec: 45963, 45964, 45965
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20231214185955.1791-3-michal.wajdeczko@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Pre-production hardware is anything before C0 (for DG2-G10), before B1
(for DG2-G11), or before A1 (for DG2-G12). Workarounds specific to such
hardware was already removed from i915 in commit eaeb4b3614
("drm/i915/dg2: Drop pre-production GT workarounds") and there's even
less value keeping these around in the Xe driver.
v2:
- Drop Wa_14011441408 from xe_mocs.c. (Gustavo)
- Drop Wa_14010648519, Wa_14010198302, and Wa_1608949956 which were
mis-implemented; they were only supposed to apply to early steppings
of DG2-G10, but were being applied unconditionally on all DG2.
(Gustavo)
- Drop reference to Wa_16011620976; the implementation stays because it
still matches Wa_22015475538. (Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20231215214531.2576215-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
"err" is not initialized when failing to create and add the freq0 sysfs
file. Remove it from the message. This fixes the following warning with
clang:
../drivers/gpu/drm/xe/xe_gt_freq.c:202:30: error: variable 'err' is uninitialized when used here [-Werror,-Wuninitialized]
kobject_name(gt->sysfs), err);
^~~
Fixes: bef52b5c7a ("drm/xe: Create a xe_gt_freq component for raw management and sysfs")
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://lore.kernel.org/r/20231220161923.3740489-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
As part of the FW definitions, we declare each blob as required via the
MODULE_FIRMWARE() macro. This causes the initramfs update (or equivalent
process) to look for the blobs on disk when the kernel is installed;
therefore, we need to make sure that all FWs we define are available in
linux-firmware.
We currently don't plan to push the PVC blob to linux-firmware, while the
LNL one will only be pushed once we have machines in CI to test it, so we
need to remove them from the list for now.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
