Pull SoC devicetree updates from Arnd Bergmann:
"This release adds the devicetree files for an impressive number of new
SoC variants, though as expected these are all related to others we
already support:
- The microchip sam9x7 devicetree is now added, after the device
driver and platform code has already made it in. This is likely the
last ARMv5 (!) platform to ever get added, updating the 20+ year
old at91/sam9 platform with DDR3 memory and gigabit ethernet.
- On the Apple platform, there are now devicetree files for a number
of A-series SoCs in addition to the M-series ones, these are used
primarily in phones and tablets, but are closely related to the
already supported chips.
- Samsung Exynos 8895 and Exynos 990 are more phone SoCs used in
older Samsung Galaxy phones.
- Qualcomm Snapdragon 778G (SM7325) is another phone SoC, closely
related to the Snapdragon 7c+ Gen 3 (SC7280) used in low-end
laptops.
- Rockchip RK3528 and RK3576 are new variants of their TV box and
Tablet chips, still using the older ARMv8.0 cores from
RK3328/RK3399 but with a newer process and other improvements from
the RK35xx (otherwise ARMv8.2) chips. RK3566T and RK3399-S are also
added, these are just lower-cost versions of their normal
counterparts.
- TI J742S2 is a feature-reduced version of the J784s4
industrial/automotive SoC, with fewer CPU cores.
- Sophgo SG2002 is an embedded SoC with one RISC-V (C906) and one ARM
(Cortex-A53) core, at this point support is only added for running
on the RISC-V side on the LicheeRV Nano board.
A total of 92 new .dts files describing individual machines is added,
which must be a new record. The majority of these is for the newly
added chips above, notably all the Apple phones and tablets. The other
new machines include nine industrial/embedded boards with NXP i.MX6 or
i.MX8 SoCs, eight for Rockchips RK35XX and one or two each for
Rockchips RV1109, RK3308, Allwinner A33, Tegra 234, Qualcomm
qcs9100/sc8280xp/x1e80100, TI AM625 and Starfive JH7110.
As usual there are also many newly added features in existing boards
as well as cleanups and minor bugfixes"
* tag 'soc-dt-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (718 commits)
arm64: dts: apm: Remove unused and undocumented "bus_num" property
arm: dts: spear13xx: Remove unused and undocumented "pl022,slave-tx-disable" property
arm64: dts: amd: Remove unused and undocumented "amd,zlib-support" property
arm64: dts: lg131x: Update spi clock properties
arm64: dts: seattle: Update spi clock properties
arm64: dts: rockchip: use less broad pinctrl for pcie3x1 on Radxa E25
arm64: dts: rockchip: add Radxa ROCK 5C
dt-bindings: arm: rockchip: add Radxa ROCK 5C
arm64: dts: rockchip: orangepi-5-plus: Enable GPU
arm64: dts: rockchip: enable USB3 on NanoPC-T6
arm64: dts: rockchip: adapt regulator nodenames to preferred form
arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi GenBook
arm64: dts: rockchip: Enable HDMI display for rk3588 Cool Pi 4B
arm64: dts: rockchip: Enable HDMI0 for rk3588 Cool Pi CM5 EVB
arm64: dts: rockchip: Enable HDMI on NanoPi R6C/R6S
arm64: dts: rockchip: Enable GPU on NanoPi R6C/R6S
arm64: dts: rockchip: Enable HDMI on Hardkernel ODROID-M2
arm64: dts: rockchip: Remove non-removable flag from sdmmc on rk3576-sige5
arm64: dts: allwinner: a100: perf1: Add eMMC and MMC node
arm64: dts: allwinner: pinephone: Add mount matrix to accelerometer
...
Microchip AT91 device tree updates for v6.13
It contains:
- device tree support for the Microchip SAM9X7 SoC and the Microchip
SAM9X75 Curiosity board
- enable power monitor support for SAM9X60-EK, SAMA5D2-ICP,
SAMA7G45 Curiosity, SAMA7G5-EK boards
- updates the uart nodes with missing properties
- device tree cleanups
* tag 'at91-dt-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sam9x75_curiosity: add sam9x75 curiosity board
dt-bindings: arm: add sam9x75 curiosity board
ARM: dts: at91: sam9x7: add device tree for SoC
ARM: dts: microchip: Rename LED sub nodes name
ARM: dts: microchip: Rename the pmic node
ARM: dts: microchip: Rename the eeprom nodename
ARM: dts: microchip: sama7g5ek: Add power monitor support
ARM: dts: microchip: sama7g54_curiosity: Add power monitor support
ARM: dts: microchip: sama5d2_icp: Add power monitor support
ARM: dts: microchip: sam9x60ek: Add power monitor support
ARM: dts: microchip: Unify rng node names
ARM: dts: microchip: Add trng labels for all at91 SoCs
ARM: dts: microchip: sam9x60: Add missing property atmel,usart-mode
Link: https://lore.kernel.org/r/20241113182050.2176500-2-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixed-regulator nowadays has preferred node-naming scheme set in the
binding. This gets all boards on the same state for Rockchip arm32-dts.
* tag 'v6.13-rockchip-dts32-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: adapt regulator nodenames to preferred form
ARM: dts: rockchip: Add Relfor Saib board
dt-bindings: arm: rockchip: Add Relfor Saib board
dt-bindings: vendor-prefixes: Add Relfor labs
ARM: dts: rockchip: Add watchdog node for RV1126
dt-bindings: watchdog: rockchip: Add rockchip,rv1126-wdt string
Link: https://lore.kernel.org/r/6740039.4vTCxPXJkl@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
STM32 DT for v6.13, round 1
Highlights:
----------
- MPU:
- STM32MP13:
- ST DK board:
- Add support of WLAN/BT Murata Type 1DX module.
- DH SOM:
- Add M24256E EEPROM suport.
- STMP32MP15:
- Use IWDG2 as wakeup source.
- Add support of WLAN/BT Murata Type 1DX module on DK2 board.
- STM32MP25:
- Enable RTC.
- Add DMA support for U(S)ART, I2C and SPI instances.
* tag 'stm32-dt-for-v6.13-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
arm64: dts: st: add DMA support on SPI instances of stm32mp25
arm64: dts: st: add DMA support on I2C instances of stm32mp25
arm64: dts: st: add DMA support on U(S)ART instances of stm32mp25
arm64: dts: st: add RNG node on stm32mp251
arm64: dts: st: enable RTC on stm32mp257f-ev1 board
arm64: dts: st: add RTC on stm32mp25x
ARM: dts: stm32: add support of WLAN/BT on stm32mp135f-dk
ARM: dts: stm32: add support of WLAN/BT on stm32mp157c-dk2
ARM: dts: stm32: rtc, add LSCO to WLAN/BT module on stm32mp135f-dk
ARM: dts: stm32: rtc, add LSCO to WLAN/BT module on stm32mp157c-dk2
ARM: dts: stm32: rtc, add pin to provide LSCO on stm32mp13
ARM: dts: stm32: rtc, add pin to provide LSCO on stm32mp15
ARM: dts: stm32: Describe M24256E write-lockable page in DH STM32MP13xx DHCOR SoM DT
ARM: dts: stm32: Add IWDG2 EXTI interrupt mapping and mark as wakeup source
Link: https://lore.kernel.org/r/92d2d6df-cc5c-488f-8ebd-550b1903db12@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm Arm64 DeviceTree changes for v6.13
Introduce descriptions of the 8cx Gen3-based Microsoft Surface Pro 9 5G,
X Elite based Dell XPS 13 9345, the QCS9100 platform and the "Ride"
development boards thereon, and the SM7325 platform and the Nothing
Phone 1.
MSM8998 gains support for HDMI. The Lenovo Miix 630 gains support for
volume keys, audio and sensor DSPs, touchscreen, and its specific WiFi
calibration variant.
On QCM6490, Fairphone FP5 gains a thermistor adjacent to UFS/RAM, while
the IDP gains UFS and WiFi support. For QCS6490 changes to Rb3Gen2
enables WiFi, Venus, PCIe, SD-card, and volume keys. Adreno speedbins
are adjusted and PMU nodes' compatibles for the two clusters are
corrected.
The DB845C/RB3 and QRB5165 RB5 vision mezzanines are converted to
DeviceTree overlays, and both gains CMA heap for libcamera to use.
SA8775P gains GPI DMA support, support for controlling download mode
(bootloader-assisted ramdump support), additional UARTs, and qcrypto
support. The "Ride" development board gains WiFi and Bluetooth support.
On SC8280XP (8cx Gen3) another UART is described, used in the
Microsoft Surface 9 5G. The WiFi/BT combo chip's power management unit
is described on the CRD and Lenovo ThinkPad X13s.
On SDM630/660 the GPU SMMU and clock controller is added, as is the
A2Noc and LPASS SMMU, and the DSP-based WiFi device. GPU, modem DSP and
WiFi is then enabled on the Inforce 6560 development board.
On SM8450 Hardware Development Kit, the WCN6855 is modelled to enable
WiFi and Bluetooth. A "global" interrupt is defined on SM8450 PCIe RC
controller, to enable hotplug.
On X Elite, USB Type-C controllers are marked as usb-role-switch
capable, the GICv3 ITS is enabled for PCIe. TCSR region is described and
wired up to allow setting and cleaning the download mode
(bootloader-assisted ramdump) flag, and residency numbers for C4/C5 are
updated.
USB role switch is enabled on Lenovo ThinkPad T14s and the ASUS Vivobook
S15. The T14s also gains support for a second source trackpad. The
Microsoft Surface Laptop gains LID switch and the USB Type-A connector
attached to the multiport controller is enabled. The CRD has its HID
device power supplies described.
Application SMMU is flagged as DMA coherent across QDU1000, SC7180,
SC8180X, SC8280XP, SDM670, SDM845, SM8150, SM8350, SM8450, and X1E80100.
In addition to this, the effort to improve style and binding compliance
continued.
* tag 'qcom-arm64-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (120 commits)
arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Add cma heap for libcamera softisp support
arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Add cma heap for libcamera softisp support
arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Drop redundant clock-lanes from camera@1a
arm64: dts: qcom: sc8280xp-x13s: Drop redundant clock-lanes from camera@10
arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Convert mezzanine riser to dtso
arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Convert mezzanine riser to dtbo
arm64: dts: qcom: sm8450-hdk: model the PMU of the on-board wcn6855
arm64: dts: qcom: sc8280xp-x13s: model the PMU of the on-board wcn6855
arm64: dts: qcom: sc8280xp-crd: enable bluetooth
arm64: dts: qcom: sc8280xp-crd: model the PMU of the on-board wcn6855
arm64: dts: qcom: qcs9100: Add support for the QCS9100 Ride and Ride Rev3 boards
dt-bindings: arm: qcom: Document qcs9100-ride and qcs9100-ride Rev3
arm64: dts: qcom: x1e80100: Update C4/C5 residency/exit numbers
arm64: dts: qcom: x1e80100-crd: describe HID supplies
arm64: dts: qcom: msm8998-lenovo-miix-630: add WiFi calibration variant
arm64: dts: qcom: msm8998-clamshell: enable resin/VolDown
arm64: dts: qcom: msm8998-lenovo-miix-630: enable VolumeUp button
arm64: dts: qcom: msm8998-lenovo-miix-630: enable aDSP and SLPI
arm64: dts: qcom: msm8998-lenovo-miix-630: enable touchscreen
arm64: dts: qcom: qcs6490-rb3gen2: Add PCIe nodes
...
Link: https://lore.kernel.org/r/20241105164901.7787-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Renesas DTS updates for v6.13 (take two)
- Add a CPU Operating Performance Points table for the RZ/V2H SoC,
- Add Battery Backup Function (VBATTB) and RTC support for the RZ/G3S
SoC and the RZ/G3S SMARC SoM,
- Add DMAC support for MMC on the RZ/A1H SoC and the Genmai
development board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.13-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: rzg3s-smarc-som: Enable RTC
arm64: dts: renesas: rzg3s-smarc-som: Enable VBATTB
arm64: dts: renesas: r9a08g045: Add RTC node
arm64: dts: renesas: r9a08g045: Add VBATTB node
arm64: dts: renesas: white-hawk-cpu-common: Add pin control for DSI-eDP IRQ
ARM: dts: renesas: r7s72100: Add DMA support to MMCIF
ARM: dts: renesas: r7s72100: Add DMAC node
arm64: dts: renesas: hihope: Drop #sound-dai-cells
dt-bindings: clock: renesas,r9a08g045-vbattb: Document VBATTB
dt-bindings: clock: r9a08g045-cpg: Add power domain ID for RTC
arm64: dts: renesas: r9a09g057: Add OPP table
Link: https://lore.kernel.org/r/cover.1730726155.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX ARM device tree changes for 6.13:
- New device support: Kobo Clara 2E, Comvetia LXR board, i.MX6DL DHCOM
SoM on PDK2 carrier
- A bunch of dt-schema warning fixes from Fabio Estevam
- A set of changes from Hiago De Franco to update audio card for Apalis
and Colibri devices
- A series from Marek Vasut to improve pin config nodes according to
bindings
- A couple of changes from Sean Nyekjaer to add DMA support i.MX6UL
UART ports
- Other small and random changes
* tag 'imx-dt-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (39 commits)
ARM: dts: imx: Add devicetree for Kobo Clara 2E
ARM: dts: imx6sll: Improve gpc description
ARM: dts: imx6sl: Pass tempmon #thermal-sensor-cells
ARM: dts: imx6sx: Fix tempmon description
ARM: dts: imx6sll: Remove regulator-3p0 unit address
ARM: dts: imx6sll: Fix the last SPDIF clock name
ARM: dts: imx7ulp: Remove incorrect mmc fallback compatible
ARM: dts: imx6sl: Remove incorrect mmc fallback compatible
ARM: dts: imx6sx: Remove incorrect mmc fallback compatible
ARM: dts: imx6sl/sll: Add the "fsl,imx6dl-gpt" fallback
ARM: dts: imx6ul: Drop duplicate space in iomux node groups
ARM: dts: imx6sx: Align pin config nodes with bindings
ARM: dts: imx6sl: imx6sll: Align pin config nodes with bindings
ARM: dts: imx6qp: Align pin config nodes with bindings
ARM: dts: imx6qdl: Align pin config nodes with bindings
ARM: dts: imx6q: Align pin config nodes with bindings
ARM: dts: imx6dl: Align pin config nodes with bindings
ARM: dts: imx53: Align pin config nodes with bindings
ARM: dts: imx51: Align pin config nodes with bindings
ARM: dts: imx50: Align pin config nodes with bindings
...
Link: https://lore.kernel.org/r/20241104090055.1881860-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm Arm32 DeviceTree updates for v6.13
IPQ4019 flash partition scheme is moved to nvmem-layout. SDX55 and SDX65
PCIe EP controllers gain missing linux,pci-domain properties.
Stylistic improvements across a range of platforms and devices.
* tag 'qcom-arm32-for-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: ipq4019: use nvmem-layout
ARM: dts: qcom: change labels to lower-case
ARM: dts: qcom: sdx65: Add 'linux,pci-domain' to PCIe EP controller node
ARM: dts: qcom: sdx55: Add 'linux,pci-domain' to PCIe EP controller node
ARM: dts: qcom: minor whitespace cleanup
ARM: dts: qcom: drop underscore in node names
Link: https://lore.kernel.org/r/20241104034744.14378-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Renesas DTS updates for v6.13
- Add support for PCIe on the R-Car V4M SoC and the Gray Hawk
development board,
- Add support for watchdog, OS timer, keyboard switch, SDHI, and MMCIF
on the Genmai development board,
- Add support for watchdog on the RSK+RZA1 development board,
- Add support for QSPI NOR FLASH on the RZ/G2UL SMARC SoM,
- Add support for E-FUSE on the R-Car V3U, S4-8, V4H, and V4M SoCs,
- Use interrupts-extended where it makes sense,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.13-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (53 commits)
arm64: dts: renesas: rzg3s-smarc: Use interrupts-extended for gpio-keys
arm64: dts: renesas: beacon-renesom: Use interrupts-extended for touchscreen
arm64: dts: renesas: Use interrupts-extended for WLAN
arm64: dts: renesas: Use interrupts-extended for video decoders
arm64: dts: renesas: Use interrupts-extended for USB muxes
arm64: dts: renesas: Use interrupts-extended for PMICs
arm64: dts: renesas: Use interrupts-extended for I/O expanders
arm64: dts: renesas: Use interrupts-extended for HDMI bridges
arm64: dts: renesas: Use interrupts-extended for Ethernet PHYs
arm64: dts: renesas: Use interrupts-extended for DisplayPort bridges
ARM: dts: renesas: kzm9g: Use interrupts-extended for sensors
ARM: dts: renesas: kzm9g: Use interrupts-extended for I/O expander
ARM: dts: renesas: r8a7742-iwg21m: Use interrupts-extended for RTC
ARM: dts: renesas: iwg22d-sodimm: Use interrupts-extended for port expander
ARM: dts: renesas: Use interrupts-extended for video decoders
ARM: dts: renesas: Use interrupts-extended for touchpanels
ARM: dts: renesas: Use interrupts-extended for PMICs
ARM: dts: renesas: Use interrupts-extended for HDMI bridges
ARM: dts: renesas: Use interrupts-extended for Ethernet PHYs
ARM: dts: renesas: Use interrupts-extended for Ethernet MACs
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The preferred nodename for fixed-regulators has changed to
pattern: '^regulator(-[0-9]+v[0-9]+|-[0-9a-z-]+)?$'
Fix all Rockchip DT regulator nodenames.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/cfc3cfe1-086b-48f1-9b89-f17c9391d3cc@gmail.com
[Also include the backlight-regulator and panel-regulator from
rk3288-veyron-edp, and adapt the Pinky device accordingly]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Commit b9bf561261 ("ARM: dts: am335x-bone-common: Increase MDIO
reset deassert time") already increased the MDIO reset deassert delay
from 6.5 to 13 ms, but this may still cause Ethernet PHY probe failures:
SMSC LAN8710/LAN8720 4a101000.mdio:00: probe with driver SMSC LAN8710/LAN8720 failed with error -5
On BeagleBone Black Rev. C3, ETH_RESETn is controlled by an open-drain
AND gate. It is pulled high by a 10K resistor, and has a 4.7µF
capacitor to ground, giving an RC time constant of 47ms. As it takes
0.7RC to charge the capacitor above the threshold voltage of a CMOS
input (VDD/2), the delay should be at least 33ms. Considering the
typical tolerance of 20% on capacitors, 40ms would be safer. Add an
additional safety margin and settle for 50ms.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/9002a58daa1b2983f39815b748ee9d2f8dcc4829.1730366936.git.geert+renesas@glider.be
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
When global LED brightness is changed by pressing the front button on
Turris Omnia, the MCU can produce an interrupt to the CPU. Add the
description of this interrupt to the LED controller node.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Adds a devicetree for the Kobo Clara 2E Ebook reader. It is based
on boards marked with "37NB-E60K2M+4A2" or "37NB-E60K2M+4B0". It is
equipped with an i.MX6SLL SoC.
Expected to work:
- Buttons
- Wifi
- Bluetooth
(if Wifi is initialized first, driver does not handle regulators
yet)
- LED
- uSD
- USB
- RTC
- Touchscreen
Add human-readable comments for devices without mainlined driver and
binding. Such comments can e.g. be help to find testers if someone
starts to work on the missing drivers.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to fsl,imx-gpc.yaml, 'clocks', 'clock-names', and 'pgc'
are required properties.
Describe them to fix the following dt-schema warnings:
interrupt-controller@20dc000: 'clocks' is a required property
interrupt-controller@20dc000: 'clock-names' is a required property
interrupt-controller@20dc000: 'pgc' is a required property
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to fsl,imx-anatop.yaml, #thermal-sensor-cells is a required
property.
Add it to fix the following dt-schema warning:
tempmon: '#thermal-sensor-cells' is a required property
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to imx-thermal.yaml, the valid compatible string
for i.MX6SX is just: compatible = "fsl,imx6sx-tempmon".
Also pass #thermal-sensor-cells = <0> as it is a required property.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to imx-thermal.yaml, the anatop regulators should not
contain unit-address/reg entries.
Change it accordingly.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The last SPDIF clock is IMX6SLL_CLK_SPBA, so change the last
clock-name entry to 'spba' as expected by fsl,spdif.yaml.
This fixes the following dt-schema warning:
spdif@2004000: clock-names:9: 'spba' was expected
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
A number of DTS correctnes fixes, to bring down the amount of errors
reported by dtbscheck.
* tag 'v6.12-rockchip-dtsfixes1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (23 commits)
arm64: dts: rockchip: Correct GPIO polarity on brcm BT nodes
arm64: dts: rockchip: Drop invalid clock-names from es8388 codec nodes
ARM: dts: rockchip: Fix the realtek audio codec on rk3036-kylin
ARM: dts: rockchip: Fix the spi controller on rk3036
ARM: dts: rockchip: drop grf reference from rk3036 hdmi
ARM: dts: rockchip: fix rk3036 acodec node
arm64: dts: rockchip: remove orphaned pinctrl-names from pinephone pro
arm64: dts: rockchip: remove num-slots property from rk3328-nanopi-r2s-plus
arm64: dts: rockchip: Fix LED triggers on rk3308-roc-cc
arm64: dts: rockchip: Remove #cooling-cells from fan on Theobroma lion
arm64: dts: rockchip: Remove undocumented supports-emmc property
arm64: dts: rockchip: Fix bluetooth properties on Rock960 boards
arm64: dts: rockchip: Fix bluetooth properties on rk3566 box demo
arm64: dts: rockchip: Drop regulator-init-microvolt from two boards
arm64: dts: rockchip: fix i2c2 pinctrl-names property on anbernic-rg353p/v
arm64: dts: rockchip: Fix reset-gpios property on brcm BT nodes
arm64: dts: rockchip: Fix wakeup prop names on PineNote BT node
arm64: dts: rockchip: Remove hdmi's 2nd interrupt on rk3328
arm64: dts: rockchip: Designate Turing RK1's system power controller
arm64: dts: rockchip: Start cooling maps numbering from zero on ROCK 5B
...
Link: https://lore.kernel.org/r/2847150.mvXUDI8C0e@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Per fsl-imx-esdhc.yaml, the correct compatible string for i.MX7ULP is:
compatible = "fsl,imx7ulp-usdhc"
Remove the undocumented "fsl,imx6sx-usdhc" fallback compatible.
This fixes the following dt-schema warnings:
mmc@2198000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6sl-usdhc', 'fsl,imx6q-usdhc'] is too long
['fsl,imx6sl-usdhc', 'fsl,imx6q-usdhc'] is too short
'fsl,imx50-esdhc' was expected
...
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Per fsl-imx-esdhc.yaml, the correct compatible string for i.MX6SL is:
compatible = "fsl,imx6sl-usdhc"
Remove the undocumented "fsl,imx6q-usdhc" fallback compatible.
This fixes the following dt-schema warnings:
mmc@2190000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6sl-usdhc', 'fsl,imx6q-usdhc'] is too long
['fsl,imx6sl-usdhc', 'fsl,imx6q-usdhc'] is too short
'fsl,imx50-esdhc' was expected
...
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Per fsl-imx-esdhc.yaml, the correct compatible string for i.MX6SX is:
compatible = "fsl,imx6sx-usdhc"
Remove the undocumented "fsl,imx6sl-usdhc" fallback compatible.
This fixes the following dt-schema warnings:
mmc@2198000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6sl-usdhc', 'fsl,imx6q-usdhc'] is too long
['fsl,imx6sl-usdhc', 'fsl,imx6q-usdhc'] is too short
'fsl,imx50-esdhc' was expected
...
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Per fsl,imxgpt.yaml, the i.MX6SL GPT compatible should be described as:
compatible = "fsl,imx6sl-gpt", "fsl,imx6dl-gpt";
Do as suggested to fix the following dt-schema warnings:
timer@2098000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6sl-gpt'] is too short
'fsl,imx1-gpt' was expected
'fsl,imx21-gpt' was expected
'fsl,imx27-gpt' was expected
'fsl,imx31-gpt' was expected
'fsl,imx6sl-gpt' is not one of ['fsl,imx25-gpt', 'fsl,imx50-gpt', 'fsl,imx51-gpt', 'fsl,imx53-gpt', 'fsl,imx6q-gpt']
'fsl,imx6dl-gpt' was expected
'fsl,imx6sl-gpt' is not one of ['fsl,imx6ul-gpt', 'fsl,imx7d-gpt']
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Drop space between node name and opening brace {.
No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> # imx6q-mba6
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
make dtbs_check has below warning:
arch/arm/boot/dts/nxp/imx/imx6q-var-mx6customboard.dtb: usbphy@20c9000: fsl,tx-d-cal: 5 is less than the minimum of 79
from schema $id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml#
According to schema, valid value of fsl,tx-d-cal is from 79 to 119. This
will convert register raw value <0x5> to corresponding <106>.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
