CONFIG_GPU_BUDDY is currently not selectable by the user, mirroring
how CONFIG_DRM_BUDDY does it - the idea is for a driver that makes use
of it to include a "select GPU_BUDDY" line in its kconfig.
CONFIG_DRM_BUDDY is also selected when building with
CONFIG_DRM_KUNIT_TEST, as it can be thought of as building a mock
"driver" running the tests, that makes use of the buddy functionality.
CONFIG_GPU_BUDDY_KUNIT_TEST doesn't follow that logic, requiring
GPU_BUDDY to be selected already instead of selecting it itself. This
requires building the test kernel with another driver that uses
DRM_BUDDY, as this is currently the only kconfig option that selects
GPU_BUDDY. That shouldn't be required to run unit tests for a module
now completely independent from DRM, let alone any specific driver.
Fix the dependency declaration in CONFIG_GPU_BUDDY_KUNIT_TEST to make it
work as intended, mirroring the setup in CONFIG_DRM_KUNIT_TEST.
Signed-off-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com>
Reviewed-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Link: https://patch.msgid.link/20260729091816.27860-3-krzysztof.niemiec@intel.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
NXP i.MX93 mediamix blk-ctrl contains one DISPLAY_MUX register which
configures parallel display format by using the "PARALLEL_DISP_FORMAT"
field. Add a DRM bridge driver to support the display format configuration.
[m.felsch@pengutronix.de: port to v7.0-rc1]
[m.felsch@pengutronix.de: add review feedback (Alexander)]
[m.felsch@pengutronix.de: fix to short Kconfig description (checkpath)]
[m.felsch@pengutronix.de: use "GPL" instead of "GPL v2" (checkpatch)]
[m.felsch@pengutronix.de: add bus-width support]
[ Liu Ying: Port to drm-misc/drm-misc-next(v7.2-rc2 based) ]
[ Liu Ying: Add nxp,imx91-pdfc compatible string ]
[ Liu Ying: Call drm_bridge_get() for next_bridge ]
[ Liu Ying: Reject unsupported output bus fmt in .atomic_get_input_bus_fmts() ]
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Link: https://patch.msgid.link/20260723-v6-18-topic-imx93-parallel-display-v13-1-ccf3f9bbc0fc@nxp.com
Signed-off-by: Liu Ying <victor.liu@nxp.com>
While we don't currently read-in the hardware state of planes, now that
we're about to start exposing blend properties for all planes that can
support alpha channels: We need to make sure that the initial atomic state
for a wndw always starts off with a supported value in pixel_blend_mode.
The easiest way to do this is to introduce a nv50_wndw_default_state()
function, and use it in nv50_display_read_hw_state() - and use that
function to enforce a valid value for pixel_blend_mode during driver
startup.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Fixes: 860e748bdd ("drm: ensure blend mode supported if pixel format with alpha exposed")
Link: https://patch.msgid.link/20260720215058.398210-3-lyude@redhat.com
At the moment, we currently (incorrectly) only expose a blend property on
the plane if we have a nv50_wndw_func->blend_set function for the given
wndw type. But we need to expose a blend property for all types of planes
that can display color formats with an alpha channel.
Prepare for doing this by introducing a way of looking up the supported
blend modes for a type of wndw by introducing .blend_modes, which describes
all possible blending modes nouveau currently supports for a type of wndw.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Fixes: 860e748bdd ("drm: ensure blend mode supported if pixel format with alpha exposed")
Link: https://patch.msgid.link/20260720215058.398210-2-lyude@redhat.com
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
While touching all these arrays, unify usage of whitespace in the list
terminator and drop trailing commas there.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Acked-by: Douglas Anderson <dianders@chromium.org> # ti-sn65dsi86.c
Link: https://patch.msgid.link/9fa3a8e372b7211c06ec885617051f5006227e3a.1784545092.git.u.kleine-koenig@baylibre.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The DSI attach error path calls drm_panel_remove() by hand even though
the panel was registered with devm_drm_panel_add(), which already
arranges for drm_panel_remove() to run on driver detach. When
mipi_dsi_attach() fails the panel is therefore removed twice: once
directly and once again while devres unwinds.
drm_panel_add() takes a reference and drm_panel_remove() drops one, so
the extra removal releases the last reference early and frees the panel
container. The put registered by devm_drm_panel_alloc() then operates on
freed memory, resulting in a use-after-free and a reference-count
underflow when a DSI host rejects the requested configuration during
probe.
Drop the manual drm_panel_remove() and let the managed cleanup handle
it, matching the other dual-DSI panel drivers.
Fixes: 75a5dbd1f4 ("drm/panel: Add Novatek NT36536 panel driver")
Signed-off-by: David Carlier <devnexen@gmail.com>
Reviewed-by: Pengyu Luo <mitltlatltl@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260724041746.12887-1-devnexen@gmail.com
Add support for the lower (secondary) panel of the AYANEO Pocket DS, a
dual-screen QCS8550 (Snapdragon 8 Gen 2) handheld. It is a 5.0" 1024x768
4:3 IPS LCD driven by a Sitronix ST7703 DDIC: every command in the vendor
init sequence maps to an ST7703 manufacturer command (SETEXTC, SETMIPI,
SETRGBIF, SETSCR, SETPOWER, SETGAMMA, SETGIP1/2), and the SETMIPI and
SETRGBIF payloads are near-identical to the already-supported Powkiddy
RGB10MAX3.
The panel is mounted in portrait (768x1024) and rotated 270 degrees in
the device, expressed through the panel rotation property. The SETEXTC
unlock password ends in 0x87 rather than the canonical 0x83; this is the
value shipped by the vendor firmware and is kept verbatim.
Init sequence extracted from the AYANEO Pocket DS BSP kernel, via the
ROCKNIX SM8550 port.
Signed-off-by: Alexandre Hamamdjian <azkali.limited@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260723-b4-st7703-pocketds-lower-v1-2-e3db246589f4@gmail.com
The i2c subsystem currently blocks during adapter deregistration
whenever there are consumers holding a reference.
Switch to using of_get_i2c_adapter_by_node() which also takes a
reference to the adapter module so that an attempt to unload the module
while in use fails gracefully instead of blocking uninterruptibly.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260717143119.1815106-3-johan@kernel.org
The list of supported GPUs contains the GPU model, along with the SoCs
they're found in. The SoC information can easily get out of date, as
typically GPU models will be integrated into many different SoCs and
upstream support for these can potentially happen over a long stretch
of time without necessarily requiring any GPU driver changes.
Replace the SoC information with the BVNC instead. This uniquely identifies
a GPU implementation and is useful in cases where a GPU model may have
multiple implementations due to, e.g. hardware errata having been fixed,
and the driver doesn't yet support all of them.
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260720-promote-bxm-4-64-v1-1-39abcd1cf263@imgtec.com
Signed-off-by: Alessio Belle <alessio.belle@imgtec.com>
The TVE200 DRM driver can be built as a module and uses tve200_of_match
as its OF match table, but the table is not exported for module alias
generation.
Add the MODULE_DEVICE_TABLE(of, ...) entry so modpost can generate OF
module aliases for OF based module autoloading.
Fixes: 179c02fe90 ("drm/tve200: Add new driver for TVE200")
Signed-off-by: Can Peng <pengcan@kylinos.cn>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260715024130.186416-1-pengcan@kylinos.cn
Add gpu_write_power_sync to verify that power register modifications
have reached the endpoint device in sequence specific sections that do
not validate device state.
These sequence specific areas have been detected experimentally with an
am57xx-evm through numerous boot and module load+unload cycles.
Signed-off-by: Randolph Sapp <rs@ti.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://patch.msgid.link/20251013170122.1145387-2-rs@ti.com
Since the very day epoch_counter in drm_connector was introduced, its
documentation was not accurate. It claims it's used to detect "any other
changes [...] besides status", when in reality, it's used to detect
changes including status, as a status change also increases the epoch
counter.
Adjust the documentation to rectify this discrepancy.
Fixes: 5186421cbf ("drm: Introduce epoch counter to drm_connector")
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20260526-hot-plug-passup-v10-1-f62351a9ea3e@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
Accept only one "region value" pair entry for the dmem.max, dmem.min,
dmem.low files.
This changes the UAPI that otherwise accepted multiple lines for setting
multiple entries in one write. No existing user is known to rely on
writing multiple regions in a single write.
Processing multiple regions in dmemcg_limit_write() could quietly change
first limits before failing on a later one and returning an error to the
writer, with no indication some changes occurred.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Eric Chanudet <echanude@redhat.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Tested-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Reviewed-by: Natalie Vock <natalie.vock@gmx.de>
Link: https://patch.msgid.link/20260608-cgroup-dmem-write-single-region-v2-1-b0cd6c4ccf1b@redhat.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Add a new unit test case for buffer clearance issue during
resume.
Using a non-power-of-two mm size, allocate alternating blocks of
4KiB in an even sequence and free them as cleared. All alternate
blocks should be marked as dirty and the split blocks should be
merged back to their original size when the blocks clear reset
function is called.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20260721114236.507578-1-Arunpravin.PaneerSelvam@amd.com
Screen garbage or flickering can be observed during mode changes (such
as VT switches) on systems using the AUO B116XAK01.6 and B140XTK02.4
panels.
This occurs because the backlight is enabled before the video signal
stabilizes. Waveform measurements show that the panel signal takes
around 140ms to stabilize after a mode change, meaning the previous 50ms T8
timing was insufficient.
To resolve this issue, adjust the eDP panel delay entry from
delay_200_500_e50 to delay_200_500_e200 (increasing T8 from 50ms to 200ms).
This matches the updated panel specifications from AUO, which now formally
define T8 as 200ms to mask any display abnormalities during mode changes.
Signed-off-by: Dio Zhang <dioyc_zhang@compal.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260720025358.2781136-1-dioyc_zhang@compal.corp-partner.google.com
find_panel_by_fwnode() is the fwnode-based counterpart to
of_drm_find_panel(), used internally by drm_panel_add_follower().
Like of_drm_find_panel(), it returned an unrefcounted pointer,
leaving a window where the panel could be freed between the lookup
and first use.
drm_panel_add_follower() worked around the missing panel kref by
calling get_device() on the panel's underlying struct device.
However, get_device() only prevents the device kobject from being freed.
It does not prevent the panel's kzalloc()'d container memory from being
released when the kref reaches zero.
Apply the same fix: call drm_panel_get() under panel_lock before
returning. Since find_panel_by_fwnode() now transfers a counted
reference to drm_panel_add_follower(), drm_panel_remove_follower()
must balance it with a matching drm_panel_put().
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260717-drm_refcount_wiring-v3-4-023900c32e01@redhat.com
